E x t e r n a l M i c r o m e t e r s

Transcription

1 External Micrometers B-1

2 Precision Measurement Precision measurement requires the use of micrometers. The first measuring tool of this type was patented by the French inventor Jean Laurent Palmer in 1848 as «calibre à vis et à vernier circulaire» (screw caliper with a circular vernier). Today, we continue to make external micrometers with these typical features. The introduction of the micrometer to the mechanical world came about by the visit of the two american engineers Joseph R. Brown and Lucian Sharpe to the Paris Exhibition in At that time, their attention was called to the Palmer s invention, which greatly interested them. After some improvements of the Palmer design, the product was manufactured on a large scale and marketed sucessfully by the two partners. The story repeated in the past as TESA SA decided to manufacture external micrometers making them the first products produced by the company. Yet no matter what you measure internal or external dimensions all TESA and ETALON micrometers are world-class products in design and quality. With a very few exceptions (e.g. external micrometers for gear tooth measurements), our micrometers respect the Abbe principle, i.e. the comparator s one (also read in the General Information). Their spindle are ground on modern grinding machines and the profile of the screw is accurately restored with negligible pitch deviations. Such manufacturing conditions are the guarantee for very low measurement uncertainties. The micrometers of both TESA and ETALON premium brands are robust as well as ergonomically and attractively designed. Besides external micrometers in standard or special versions, we also offer micrometer heads, depth micrometers, full micrometer sets as well as a wide of accessories plus all what you need for your calibrations. Each model provides either an analogue or a digital indication according to the execution. The models with electrical measuring system also include an RS 232 digital interface. Measuring Max. perm. Number of interference µm 10 N range/ errors*/µm fringes or rings B-2 Max. permissible errors In future, these errors are used instead of «deviation span» previously indicated in the various issues of our general catalogue. This change is made in order to conform with the new specifications of international standards. With respect to this, read also «What is known...» in General Information. *The max. perm. errors include the errors of the measuring element as well as the deviations in flatness and parallelism of the measuring faces and the errors due to the flexure of the frame.

3 DIN 863 T1 TESA MICROMASTER Electronic Micrometers with Digital Display 0, in Metric/inch conversion 100 : 6,5 dia. > 100 : 8 dia. With new TESA measuring system «capa µ system», patented Measuring span of 30 Large easy-to-read digital display Models: EASY with a single function key IP54 with water spray protection as well as IP54 RS with added RS 232 interface 0,5 LCD, digit height: 7 Floating zero Display lock (except for model EASY) Interface: RS 232 opto-coupled 3 V lithium battery 1 to 2 a ( 2000 h/a) Automatic shut-down after 10 min. Display setting is maintained as long as power supply remains stable 10 C to 40 C -10 C to 60 C 80%, with no condensation Degree of protection (IEC 60529): IP40 (also valid with used RS output) or IP54 Measuring range 0 to 100: with SCS calibration certificate Measuring range > 100 : inspection report MICROMASTER EASY in in IP40 MICROMASTER IP IP IP IP IP54 MICROMASTER IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS 232 Optional Accessory Lithium battery - 3 V, 190 mah, type CR 2030 For ordering information on connection cables etc., see section L B-3

4 TESAMASTER Precision Micrometers with Digital Counter to 0,1 Analogue indication of the full millimetres, hundredths and fractions of hundredths Accurate, fast reading of the tenths of millimetres Parallax-free reading of the thousandts of millimetres on vernier. DIN 863 T1 NF E Vernier reading to 0,001 or in Scale division: 0,1 or in 100 : 6,5 dia. > 100 : 8 dia 0,5 0,01 µm µm , , , , , , , ,1 70 in µm µm , , ,5 ETALON MICRORAPID 226 with 1 Revolution High precision micrometers Fast, accurate reading No reading error of the half millimetres Barrel with 1 pitch Thimble with 100 graduations Vernier reading to 0,001. DIN 863 T1 NF E ,001, parallax-free reading on vernier 6,5 dia. 1 B-4 µm µm , , ,5

5 DIN 863 T1 NF E Vernier reading to 0,001, parallax-free External Micrometers ETALON Basic to 0,001 High accuracy Parallax-free reading on vernier. carbide tipped 6,5 dia. 0,5 µm µm ETALON 260 Standard Models with Analogue Indication The knurled sleeve needs only be reversed to render the friction drive built into the thimble inactive. DIN 863 T1 NF E to 100 or 0 to 4 in with vernier reading 100 : 6,5 dia. > : 8 dia. 0,5 µm µm , , , , , , , , ,01 4 2, , , ,01 6 3, ,01 6 3, , , in in µm µm , , ,5 B-5

6 TESA ISOMASTER Standard Models with Analogue Indication Slanted full millimetres on the barrel are set apart from the straight half millimetres to virtually eliminate reading errors.the knurled sleeve needs only be reversed to render the friction drive built into the thimble inactive. DIN 863 T1 NF E carbide tipped 100 : 6,5 dia. > : 8 dia. 0,5 in in , , , , , , , , , , , ,01 Set of 4 TESA ISOMASTER Same execution as above. The models covering the application range 0 to 100 provide the quality that you need at competitive prices ETALON Basic to 0,01 DIN 863 T1 NF E ,01 carbide tipped Set of 4 ETALON Basic to o,o1 6,5 dia. 0, B-6

7 (Style D16) 0, in Metric/inch conversion MICROMASTER with interchangeable Anvils Lightweight, but rugged anvil micrometers. One set (No ) consists of 4 interchangeable anvils in steps of 25. Anvils are adjusted (and ed) in sets, thus rendering unnecessay the correction of the indication each time an anvil is exchanged. 30 measuring span : malleable cast iron; : steel tube with insulating grips. Max. flexure of the frame under a measuring force of 10 N: see the table opposite 8 dia. 0,5 LCD, digit height: 7 RS 232 Other technical data: see page B-3 Wooden case in µm µm , Dial Gauge Element for MICROMASTER Can replace the interchangeable anvils on AB series micrometers. Make finding the culmination point easier. Ensures a constant measuring force. Supplied as standard accessory with the ABY series micrometers. See next page B-7

8 ISOMASTER AB with Interchangeable Anvils Lightweight, but rugged anvil micrometers. One set (No ) consists of 4 interchangeable anvils in steps of 25. Anvils are adjusted (and ed) in sets, thus rendering unnecessary the correction of the indication each time an anvil is exchanged. (Style D16) NF E , : malleable cast iron; : steel tube with insulating grips. Max. flexure of the frame under a measuring force of 10 N: see the table opposite 8 dia. 0,5 Wooden case Declaration µm µm , Dial Gauge Element for AB Series Micrometers Can replace the interchangeable anvils on these micrometers. Make finding the culmination point easier. Ensures a constant measuring force. Supplied as standard accessory with the ABY series micrometers. ± 1,5 0,01 carbide tipped 8 dia. Meas. element: 11 dia., 100 long. Dial gauge No : 40 dial diameter, two-way dial reading. With dial gauge and clamp Declarartion of conformity B-8

9 (Style D15) NF E , : malleable cast iron; > : steel tube with insulating grips. Max. flexure of the frame under a measuring force of 10 N: see the table opposite ABY Series ISOMASTER with Adjustable Dial Gauge Element Similar to the AB series micrometers, but equipped with the adjustable dial gauge element No that helps you to find the culmination point easier with a constant measuring force. 8 dia. 0,5 Dial gauge: see on page B-8 Wooden case Declaration of conformity (Style D16) NF E dia. Set includes 2 covers for the frame as well as 1 clamping nut Interchangeable Anvils for ABY Series ISOMASTER Set of 4 interchangeable anvils in steps of 25. The anvils are adjusted and ed in sets, thus eliminating the need for resetting the indication after their exchange. Supplied as standard accessories with the AB series micrometers µm µm , B-9

10 MICRO-ETALON 225 Micrometers with a Dial Indicator Feature a mobile anvil and built-in dial indicator Ideal for comparative measurements on small part series Nominal dimension is set on the micrometer and deviations are read on the dial indicator Retractable anvil by means of a push-button Rotating Dial for fine adjustment, also with adjustable tolerance markers. (Style D13) 6,5 dia. For model with small measuring faces: 2 dia., 5 long 0,5 ø2 5 Anvil: 4,5 to 5,5 N Micrometer with vernier reading to 0,002 or in. Dial indicator: 0,001 or 0,002 / or in Dial indicator: ±0,025 or 0,05 / ± or ± in Micrometer: max. perm. error of 2 µm Dial indicator: 1 µm Dial indicator: repeatability limit of 0,5 µm Declaration of conformity Dial indicator Dial indicator 0, in in Model with small measuring faces Dial indicator Dial indicator 0, in in Protective Cover Made in transparent plastic Can be mounted on the bezel Protects the indicator against dust and liquids Prevents both tolerance markers from being accidentally displaced. B

11 (Style D14) NF E Vernier reading to 0,002 ETALON MICROSPEL 280 These micrometers have a mobile anvil and a 8 dia. fixing bore for mounting a sensor with linear action such as the TESA GT 21/22 electronic probe (also refer to section L). Specially designed for batch inspection of small precision parts. 6,5 dia. Models with small measuring faces: 2 dia., 5 long 0,5 Anvil: 2 up to 8 N, adjustable Measuring element: max. perm. error of 2 µm Mobile anvil: repeatability limit of 0,5 µm Adjustable part support (except model with small measuring faces) Declaration of conformity 5 ø Model with small measuring faces Important Electronic probe and mirometer stand are not part of the delivery scope and must be ordered separtely. B-11

12 Micrometers with Small Measuring Faces For measuring grooves, feather grooves, splines and other difficult to reach measuring points. Particularly suited for measuring small parts in precision work owing to the small measuring faces. Models MICROMASTER (Style D3) 0, in Metric/inch conversion carbide measuring faces, fixed RS 232: interface, opto-coupled Degree of protection (IEC 60529): IP54 or IP40 with use of the digital output For additional technical data: see page B-3 5 in Optional Accessory Lithium byttery - 3 V, 190 mah, type CR 2032 For information on cables etc., see section L ø2 Measuring range 0 to 100: with SCS-calibration certificate Measuring range > 100 : inspection report of conformity Models ISOMASTER AD (Style D3) NF E , in carbide measuring faces, fixed in ø2 5 B-12

13 Models TESAMASTER AD (Style D3) NF E Vernier reading to 0,001 Scale division 0,1 carbide measuring faces, fixed 5 ø Model MICRORAPID (Style D3) NF E ,001. Parallax-free reading on vernier 100 divisions carbide measuring faces, fixed 1 5 ø B-13

14 Micrometers with One Spherical Measuring Face Measure wall thickness of tubing. Models MICROMASTER Model ETALON in (Style D1) MICROMASTER: 0,001 or in ETALON: 0,002 Anvils: tungsten carbide (MICROMASTER) or titanium coating (ETALON). carbide measurring spindle Anvil with a 3,5 (MICROMASTER) or 3,25 (ETALON) spherical measuring face. Spindle with a flat measuring face RS 232 on MICROMASTER Other technical data to MICROMASTER: see page B Micrometers with Two Spherical Measuring Faces Rounded Measuring faces on anvil and spindle for measuring concave surfaces of workpieces, e.g. ball-bearing guides or walls of tubing. Models MICROMASTER (Style D1) 0, in carbide Spherical, 3,5 radius Other technical data: see page B-3 in B-14

15 (Style D1) NF E AAS Series ISOMASTER Micrometers Rounded measuring faces for measuring concave surfaces such as ball-bearing guides and tubing walls. 0,01 Measuring faces rounded to 3,25 Titanium carbide coated measuring faces for both models No and : Hardened steel for other models 0, (TiC) (TiC) Steel ball tip, and lapped. Dull-chrome brass retainer Spherical Element for External Micrometers Holder with a ball tip that fits on measuring faces having a 6,5 diameter Serve to measure tubing wall thickness, workpieces with concave surfaces and the like. Ball tip in B-15

16 Micrometers for Soft Materials With two large, round-edge measuring faces Measure the thickness of materials such as paper and plastic sheets, felt, cloth and other soft materials. Models MICROMASTER Non-rotating measuring spindle Without spindle lock. (Style D6) 0, in Metric/inch conversion Steel measuring faces, Non-rotating, 20 dia. Flatness tolerance: 3 µm Parallelism tolerance: 6 µm Max. perm. error: 4 µm RS 232 Other technical data: see page B-3 R1 in ø20 Model ISOMASTER AF (Style D6) 0,01 Steel measuring faces, 15 Flatness tolerance: 3 µm Parallelism tolerance: 6 µm B

17 (Style D3) 0, in Metric/inch conversion Steel measuring faces, Non-rotating spindle 90 : 25 dia. > : 30 dia. External Micrometers Micrometers for Gear Pitch Measurement Flanges with ring-shaped measuring faces for root tangent lengths Wk on gear pitches, distance between grooves and slots as well as other hard-to-reach locations. Models MICROMASTER Non-rotating measuring spindle Without spindle lock. Suitable from module 0,5 RS 232 Other technical data: see page B-3 W K in Models ISOMASTER AE (Style D7) NF E ,01 Steel measuring faces, 100 : 25 dia. > : 32 dia. Suitable from module 0,6 Micrometers for Gear Tooth Measurement Max. perm. error* Max. perm. error Flatness Parallelism Max. flexure with partial contact of with full contact of the of the frames the measuring face measuring face (DIN 863-T1) µm µm µm µm µm * Disregarding a rim of 1 as the measuring faces are being inspected. For enhanced accuracy, the micrometer should be calibrated in the position of use. B-17

18 MICROMASTER with 7 Pairs of Interchangeable Measuring Inserts Non-rotating spindle Without spindle lock. 0, in Metric/inch conversion Micrometer element with a max. perm. error of 3 µm 7,5 dia., non-rotating spindle. With a fixing bore for a measuring insert. Adjustable attachment on anvil for a measuring insert, with lock. Steel measuring faces, RS 232 in Other technical data on page B-3 Components of the Full Micrometers ø6.5 ø5 ø in Single micrometers Full set of measuring inserts Includes one pair of the following inserts: ø6.5 ø ø flat 6,5 dia small, flat spherical R = large, flat narrow, flat 0, cone-shaped 0,3/ knife-edged 0,3/60 Specially designed measuring faces also available upon request. ø ø12 R= B-18

19 0,01 ETALON Basic with 7 Pairs of Interchangeable Measuring Inserts 0,5 Micrometer element with a max. perm. error of 3 µm 8,0 dia., non-rotating spindle. With a fixing bore for a measuring insert. Adjustable attachment on anvil for a measuring insert with lock. Without spindle lock Components of the Full Micrometers ø6.5 ø5 Single micrometers ø2 Full set of measuring inserts ø Includes one pair of the following inserts ø6.5 R= µm flat 6,5 0, small, flat 2 0, spherical R = large, flat 12 1, narrow, flat 0, cone-shaped 0,3 / knife-edged 0,3 / ø0.3 ø ø B-19

20 AT Series ISOMASTER Micrometers with Large Measuring Face on Anvil Micrometers with a flat, rectangular measuring face that serves for inspecting the width of milling cutters with staggered teeth. (style D11) 0,01 Titanium carbide measuring face on anvil. Measuring spindle in tungsten carbide Anvil with a 50 x 9 flat face for measuring range 0 to 25 or 60 x 10 from 25 up to 50. Spindle with a 6,5 dia. measuring face Anvil with a flatness tolerance of 2 µm 0, AN Series ISOMASTER with Small Frame Measures wire thickness and ball diameters up to 10. Small frame with 2 resting surfaces for wires. (Style D2) NF E ,01 6,5 dia. 0, B-20

21 (Style D12) NF E ,01 ETALON Basic for Tube Wall Thickness Measurement Barrel-shaped anvil for measuring the tube wall thickness and other curved workpieces. Hardened steel anvil. carbide spindle 5 dia. on anvil. 6,5 dia. on spindle 0,5 ø5 1, Vernier reading to 0,002 Hardened steel anvils. carbide spindle Anvils: see drawing. Spindle: 6,5 dia. ETALON Basic with Two Interchangeable Anvils Universal micrometers Anvils have either a flat or a cylindrical measuring face. 0,5 ø B-21

22 Micrometers with Prismatic Measuring Faces Measure test pieces with an uneven of grooves such as milling cutters, taps, drills and splined shafts as well as odd polygons. Determine roundness errors on cylindrical surfaces. Angle of the prism aperture is designed for workpieces having a of 3 or 5 flutes. Models MICROMASTER (Style D 10) 0, in Metric/inch conversion Angle of the prism aperture: 60 for 3-flute test pieces or 108 for 5-flute test pieces 0,75 for 3-flute test pieces or 0,559 for 5-flute test pieces RS 232 Other technical data on page B-3 in 3-flute test pieces (60 ) flute test pieces (108 ) B-22

23 Models ISOMASTER AS (Style D 10) NF E ,01 carbide tipped Angle of the prism aperture: 60 for 3-flute test pieces or 108 for 5-flute test pieces 0,75 for 3-flute test pieces or 0,559 for 5-flute test pieces Declaration 3-flute test pieces (60 ) flute test pieces (108 ) Cylindrical Setting Standards Hardened steel Fitted with plastic guard plates from nominal dimension of 20. Actual size engraved on the top face Declaration of conformity µm µm , , , ,2 1, ,2 1, ,5 1, B-23

24 Micrometers for Thread Measurement Used for pitch diameter inspection Anvil with adjustable holder for mounting a measuring insert with prismatic faces Fine screw adjustment and locking device Spindle has a fixing bore for a cone-shaped measuring insert. Models MICROMASTER AC (Style D18) 0, in Metric/inch conversion 30 measuring span RS 232 Other technical data on page B-3 in Important The inserts and setting standards must be ordered separately. Models ISOMASTER AC (Style D 18) NF E , in 0,5 in Important The inserts and setting standards must be ordered separately. Declaration of conformity B-24

25 Hardened steel Interchangeable Thread Inserts for TESA AC Series Micrometers With measuring faces specially designed for checking pitch diameters. Fixing rod a 3,5 dia., 15,5 long Supplied in sets or pairs Pitch in Threads per in Threads per in ISO metric threads Whitworth threads Unified inch-treads UN, UNC, UN 60 flank angle 55 flank angle 60 flank angle ,4 0, ,5 0, ,6 0, ,8 1, ,0 1, ,25 1, ,5 2, ,0 2, ,5 3, ,0 4, ,0 5, ,0 6,0 Set of 12 pairs Set of 10 pairs Set of 7 pairs ,4 6, Setting Standards for Screw Thread Micrometers Hardened steel Insulating sleeve marked with actual size Declaration of conformity 60 flank angle in 55 flank angle B-25

26 XB Wires for Screw Threads For measuring pitch diameter of threads using the three-wire method. The actual flank diameter d2 can either be determined arithmetically or with the aid of the relevant tables based on the measured actual size M Suitable for all standard micrometers with a measuring insert having a 6,5 diameter. Steel wires, Wires are mounted on holders: 2-wire holder rests on anvil while the single wire holder is used on spindle side Single pairs are supplied in a plastic box, full set in a wooden case d D Declaration of conformity d2 M Wires ISO metric Whitworth Unified inch-threads diameter threads threads UN, UNC, UNF d D Pitch in Number of threads per in Number of threads per in ,17 0,25 and 0, ,22 0, ,25 0, ,29 0,45 and 0, ,335 0,6 48 and and ,455 0,7 to 0, ,53 0,9 32 and ,62 1,0 26 and ,725 1,25 22 to ,895 1,5 18 and and ,10 1, and ,35 2,0 12 and and ,65 2,5 10 and 9 10 and ,05 3,0 and 3,5 8 and 7 8 and ,55 4,0 and 4, ,20 5,0 and 5,5 5 and and 4.5 Set of 16 pairs ,17 3,20 Micrometer Stands For micrometers up to 300 as well as measuring instruments. Clamp aperture of 16 m (TESA) or 20 (ETALON) TESA Lacquered cast iron base Tilting locking device. Uses one single bolt only ETALON B-26

27 Steel measuring faces, INTERAPID have one flat end face and 1 rounded face, lapped. ETALON Basic: 275 : with a flat parallel face, lapped 300 : 1 flat and 1 rounded faces, lapped Cylindricalgauge block with a plastic insulating grip. INTERAPID with dullchrome shaft INTERAPID with lengths 175 : : 13 ETALON Basic: 75 long: long: 8 Max. perm. error (ETALON Basic): 75 : 2 µm 100 and 125 : 2,5 µm 150 and 175 : 3 µm : 3,5 µm : 4 µm : 5 µm 500 : 6 µm INTERAPID: Tolerance over the length ±(1 + L/100) µm, L in INTERAPID: with actual measured length Declaration of conformity External Micrometers Setting Standards in in INTERAPID ETALON Basic INTERAPID INTERAPID INTERAPID Guide Collars Make the positioning of INTERAPID setting standards fast and simple B-27

28 ETALON Cylindrical Step Master Gauges For display setting and calibration Hardened alloy steel Diameters in step of > 50 Max. perm. errors for nominal diameters: 80 : 1,5 µm : 2,0 µm 130 : 2,5 µm Mounted on a wood base. Supplied with dust cover Declaration of conformity Plan Parallel Optical Flats Used for examining the flatness and parallelism of the measuring faces on external micrometers as well as other similar measuring instruments. The difference in length of the optical flats within a set corresponds to a quarter or a third of the spindle pitch of 0, , , , , ,00 12, , , , ,00 27, Length tolerance with reference to the nominal dimension: ± 100 µm Flatness tolerances for optical flats with lengths: 27,335 : 0,15 µm 52,00 > 77,335 : 0,2 µm Parallelism tolerances for optical flats with lengths: 27,335 : 0,4 µm 52,00 > 77,335 : 0,5 µm Each set is supplied in a wooden case Declaration of conformity , , , ,00 52, , , , ,00 77,335 B-28

29 Sets of TESA Mikechex Gauge Blocks, Metric Designated to calibrate and set the indication of external micrometers. Steel Gauge blocks carbide and ceramic gauge blocks ISO Set compositions: Mikechex M10: DIN 863 T1 Mikechex M8, M10 and M11: BS 870 Special alloyed steel, stable and resistant to wear. Stable tungsten carbide, highly resistant to wear. Ceramic made from stabilised zirconia, extremely resistant to wear and scratches Steel:(11,5 ± 1,0) x 10-6 K -1 carbide: (4,23 ± 0,1) x 10-6 K -1. Ceramic: (9,7 ± 0,8) x 10-6 K -1 Limit deviations t e on page I-5 Tolerances t v on page I-5 See page I-2 Optical flats on page I-12 Supplied in sets or individually Wooden case Steel gauge blocks of any grade: SCS calibration certificate Carbide and ceramic gauge blocks of any grade: UKAS calibration certificate Steel Carbide Ceramic Set composition 8 Piece Set Mikechex M K 3,1 6,5 9,7 12,5 15,8 19,0 21,9 25, Piece Set Mikechex M8 with Optical Flat 10 Piece Set Mikechex M ,1 6,5 9,7 12,5 15,8 19,0 21,9 25, diameter optical flat* K 2,5 5,1 7,7 10,3 12,9 15,0 17,6 20, ,8 25, Piece Set Mikechex M10 with Optical Flat 11 Piece Set Mikechex M ,5 5,1 7,7 10,3 12,9 15,0 17,6 20, ,8 25, diameter optical flat* ,1 6,5 9,7 12,5 15,8 19,0 21,9 25, Piece Set Mikechex M11 with Optical Flat * Max. flatness error: 0,125 µm ,1 6,5 9,7 12,5 15,8 19,0 21,9 25, diameter optical flat* B-29

30 Sets of TESA Mikechex Gauge Blocks, Inch Designated to calibrate and set the indication of external micrometers. BS 4311 Part 1 BS 870 for all set compositions Steel sort: tungsten carbide providing stability as well as high resistance to wear. Ceramic sort: extremely resistant zirconia Tugnsten carbide: (4,23 ± 0,1) x 10-6 K -1 Ceramic: (9,7 ± 0,8) x 10-6 K -1 See BS 4311 Part 1 Supplied as single gauge blocks or in sets Wooden case Carbide Ceramic Set composition UKAS calibration certificate 8 Piece Set Mikechex E K Piece Set Mikechex E K Piece Set Mikechex E in Heat Insulating Grips for Micrometers Protect the frame from hand warmth. Models No or in anodised aluminum, black colour. No up to in moulded plastic, black colour up to B-30

31 Micrometer Heads Micrometer Heads Components coonly used for checking the various displacements on measuring fixtures, coordinate tables, microscopes, machines as well as other special appliances. Mounted on the cylindrical clamping shaft. Models MICROMASTER Without spindle lock. DIN 863 T2 (Style E) 0, in Metric/inch conversion /39 6,5 dia ,5 Max. perm. error of 3 µm Other technical data on page B-3 Opto-coupled RS 232 interface ø6.5 ø12 h h h h6 DIN 863 T2 (Style E) NF E Model ISOMASTER AR Without spindle lock. 0, in carbide tipped ø6.5 ø12h6 ø18.6 ø12.2 6,5 dia. 0, Max. perm. error of 3 µm Declaration in h h6 B-31

32 Micrometer Heads Model TESAMASTER AR Without spindle lock. DIN 863 T2 (style E) Vernier reading to 0,001 or in Scale division to 0,1 or in ø6.5 ø12 h6 ø21 ø11.5 6,5 dia 18 0, Max. perm. error of 2 µm in h h6 Declaration Model ETALON Basic Without spindle lock Non-rotating spindle. DIN 863 T2 (Style E) No with vernier carbide tipped 38 6,5 dia 10 0,5 ø8 ø12 h6 110 Max. perm. error of 3 µm ,01 12h ,002 12h6 Declaration B-32

33 Depth Micrometers DIN 863 T2 (Style E) NF E ETALON 266 Micrometer Heads With spindle lock. Vernier reading to 0,002 0,5 Max. perm. error of 3 µm ø6.5/8 ø12 h6/10 h6 ø18.6 Declaration Spindle D lock ,5 12h6 without h6 with ,5 10h6 with DIN 863 T2 (Style T) 0, in Metric/inch conversion Non-rotating spindle Measuring rods with steel ends Depth Micrometers With interchangeable measuring rods provided in sets. These depth rods areadjusted in increments of 30 or 25, thus eliminating the need for correcting the display when rods are exchanged. Models MICROMASTER Non-rotating measuring rod. Sets in increments of dia. measuring rods 30 RS 232 output 0,5 Max. perm. error (meas. element): 3 µm in x x 15 B-33

34 Depth Micrometers AQ Series ISOMASTER Micrometers Measuring rods in increments of 25 or 1 in. DIN 863 T2 (Style T) NF E , in Measuring rods with steel ends 3 dia. measuring rods. Measuring face on the base: see table 0,5 Max. perm. error of the measuring element: 3 µm in x x x x x x x x 15 Declaration B-34

35 Caliper Instruments Sets Instruments Sets DIN 862 Technical data on page A-9 Micrometer DIN 863 T1 NF E Technical data on page B-7 Additional data ETALON Basic Set Consisting of: ETALON Basic Set ETALON Basic vernier caliper , ETALON Basic external micrometer , Suited plastic case Caliper DIN 862 Technical data on page A-9 Depth foot 75 x 6 measuring faces Micrometer DIN 863 T1 NF E Technical data on page B-6 Additional data TESA Swiss Set Consisting of: TESA SWISSCAL 2 vernier caliper , Depth measuring foot TESA ISOMASTER external micrometer , Suited plastic case TESA Swiss Set B-35

36 Instruments Sets Caliper DIN 862 TESA Duo-Set TESA Duo-Set 1 Consisting of: TESA CCMA-M dial caliper , Depth measuring foot TESA ISOMASTER external micrometer , Suited plastic case Technical data on page A-6 Depth foot 75 x 6 measuring face Micrometer DIN 863 T1 NF E Technical data on page B-6 Additional data Caliper DIN 862 TESA Duo-Set TESA Duo-Set 2 Consisting of: TESA CCMA-M dial caliper , Depth measuring foot TESAMASTER external micrometer , Suited plastic case Technical data on page A-6 Depth foot 75 x 6 measuring faces Micrometer DIN 863 T1 NF E Technical data on page B-4 Additional data B-36

37 Instruments Sets Caliper DIN 862 Technical data on page A-3 Depth foot 75 x 6 measuring face Micrometer DIN 863 T1 NF E Technical data on page B-6 Additional data TESA Duo-Set 8 Consisting of: TESA DIGIT-CAL capa µ system caliper , Depth measuring foot TESA ISOMASTER external micrometer , Suited plastic case TESA Duo-Set 8 Caliper DIN 862 Technical data on page A-3 Depth foot 75 x 6 measuring face Micrometer DIN 863 T1 NF E Technical data on page B-4 Additional data TESA Duo-Set 9 Consisiting of: TESA DIGIT-CAL capa µ system caliper , Depth measuring foot TESAMASTER external micrometer , Suited plastic case TESA Duo-Set 9 B-37

38 Instruments Sets Caliper DIN 862 Technical data on page A-3 TESA Duo-Set TESA Duo-Set 11 Consisting of: TESA DIGIT-CAL capa µ system caliper , Depth measuring foot TESA MICROMASTER EASY external micrometer , Suited plastic case Depth foot 75 x 6 measuring face Micrometer DIN 863 T1 NF E Technical data on page B-3 SCS calibration certificate Caliper DIN 862 Technical data on page A-3 TESA Duo-Set TESA Duo-Set 12 Consisting of de: Depth foot 75 x 6 measuring face Micrometer B TESA DIGIT-CAL capa µ system caliper ,01 RS Depth measuring foot TESA MICROMASTER IP54 RS external micrometer ,001 RS Suited plastic case DIN 863 T1 NF E Technical data on page B-3 SCS calibration certificate

39 Instruments Sets Caliper DIN 862 Technical data: page A-3 Depth foot TESA Duo-Set 13 Measuring face: 75 x 6 Micrometer DIN 863 T1, NF E carbide tipped Technical data: page B-3 SCS calibration certificate TESA Duo-Set 13 Consisting of: TESA CAL IP65 electronic caliper , Depth measuring foot TESA MICROMASTER IP54 external micrometer , Suited plastic case Caliper DIN 862 Technical data: page A-3 Depth foot TESA Duo-Set 14 Measuring face: 75 x 6 Micrometer DIN 863 T1, NF E carbide tipped Technical data: page B-3 SCS calibration certificate TESA Duo-Set 14 Consisting of: TESA CAL IP65 electronic caliper , Depth measuring foot TESA MICROMASTER EASY external micrometer , Suited plastic case B-39

40 Instruments Sets Caliper DIN 862 Technical data: page A-3 TESA Duo-Set 15 Depth foot TESA Duo-Set 15 Consisting of: TESA CAL IP65 RS electronic caliper , Depth measuring foot MICROMASTER IP54 RS external micrometer , Suited plastic case Measuring face: 75 x 6 Micrometer DIN 863 T1, NF E carbide tipped Technical data: page B-3 SCS calibration certificate B-40