One-hand ph/temperature measuring instrument

Transcription

1 One-hand ph/temperature measuring instrument testo 205 ph tip embedded in breakage-proof plastic ph Combined penetration tip with temperature probe Maintenance-free gel electrolyte C Measurement tip exchangeable by user Automatic final value recognition (auto-hold) 2-line, illuminated display 1, 2 or 3 point calibration possible The testo 205 is a robust food penetration measuring instrument for temperature and ph values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm. The instrument is especially well suited to ph measurements in semi-solid media such as meat. The storage cap filled with electrolyte gel is used for storing the probe between measurements.

2 testo 205 Technical data / Accessories testo 205 One-hand ph/ C measuring instrument with penetration probe, storage cap, belt/wall holder General technical data Storage temp. -20 to +70 C Oper. temp. 0 to +50 C Battery type 4 x Button cell LR44 Battery life 80 h (Auto Off 10 Min) Weight 135 g 145 x 38 x 167 mm Display LCD, 2 lines /msp/A/ testo 205, Starter set One-hand ph/ C meas. instr. with penetration probe, storage cap, gel and cal. bottles 250 ml ph 4+7, belt/wall holder and aluminium case Sensor types ph electrode NTC Meas. range 0 to 14 ph 0 to 60 C (Short-term to +80 C max. 5 min) ±1 digit ±0.02 ph ±0.4 C Resolution 0.01 ph 0.1 C Accessories Accessories for measuring instrument Subject to change without notice. Spare ph probe for testo 205 with gel storage cap Storage cap for testo 205 with KCL gel filling Button cell batteries, Type LR 44, 1.5 Volt (4 off) ph buffer solution 4.01 in dosing bottle (250 ml) with DAkkS calibration certificate ph buffer solution 7.00 in dosing bottle (250 ml) with DAkkS calibration certificate

3 ph/temperature measuring instrument testo 206 Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector) Built-in temperature sensor ph C Maintenance-free gel electrolyte Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65) Automatic final value recognition (Auto-hold) Two-line display 1, 2, or 3-point calibration possible The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a ph immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt. The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact. The testo 206-pH1 is specially designed for fast ph checks in liquids. The testo 206-pH2 is ideally suited for ph measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc. The testo 206-pH3 is equipped with a BNC socket which allows the connection of any ph probes to the instrument, depending on the application. This makes the instrument universally applicable.

4 testo 206 Technical data / Accessories testo 206 ph1 Set testo 206-pH1, one-hand ph/ C measuring instrument, protection class IP68, incl. storage cap with gel, TopSafe and belt/wall holder Sensor type Measuring range ±1 digit Resolution Sensor type Measuring range ±1 digit Resolution ph electrode 0 to 14 ph ±0.02 ph 0.01 ph NTC 0 to 60 C (Short-term to +80 C max. 5 min) ±0.4 C 0.1 C testo 206-pH1 Starter Set Starter set testo 206-pH1, one-hand ph/ C measuring instrument, ph1 probe head for liquids, incl. storage cap with gel, calibration dosing bottles 250 ml ph 4 and 7, TopSafe, belt/wall holder and aluminium case General technical data Operating temperature 0 to +60 C Storage temperature -20 to +70 C No. meas. channels 2 channel Temperature Automatic compensation Meas. rate 2 measurements per second Battery type Housing material Battery life Weight Display 1x CR2032 ABS with TopSafe, Protection type IP h (Auto Off 10 min) 197 x 33 x 20 mm 69 g LCD, 2 lines Easy exchange of probes with testo 206-pH1/-pH2/-pH3 testo 206-pH1: ph1 probe head for liquids Ideally suitable for monitoring heating system water according to VDI Accessories Accessories for measuring instrument Spare ph probe for testo 206 incl. gel storage cap Storage cap for testo 206 with KCI gel filling Lithium battery button cell ph buffer solution 4.01 in dosing bottle (250 ml) with DAkkS calibration certificate ph buffer solution 7.00 in dosing bottle (250 ml) with DAkkS calibration certificate

5 testo 206 Technical data / Accessories testo 206-pH2 Set testo 206-pH2, one-hand ph/ C measuring instrument, ph2 probe head for semi-solid substances, incl. storage cap with gel, TopSafe and belt/wall holder General technical data Operating temperature 0 to +60 C Storage temperature -20 to +70 C No. meas. channels 2 channel Temperature Automatic compensation Meas. rate 2 measurements per second testo 206-pH2 Starter Set Battery type Housing material Battery life Weight Display 1x CR2032 ABS with TopSafe, Protection type IP h (Auto Off 10 min) 197 x 33 x 20 mm 62 g LCD, 2 lines Starter set testo 206-pH2, one-hand ph/ C measuring instrument, ph2 probe head for semisolid substances, incl. storage cap with gel, calibration dosing bottles 250 ml ph 4 and 7, TopSafe, belt/wall holder and aluminium case Ideal for the testing and care of water-based coolant-lubricants (according to BGR 143). testo 206-pH2: ph2 probe head for semi-solid food Sensor types ph electrode NTC Measuring range 0 to 14 ph 0 to 60 C (Short-term to +80 C max. 5 min) ±1 digit ±0.02 ph ±0.4 C Resolution 0.01 ph 0.1 C Accessories Accessories for measuring instrument Spare ph probe ph2 for testo 206 incl. gel storage cap Storage cap for testo 206 with KCI gel filling Lithium battery button cell ph buffer solution 4.01 in dosing bottle (250 ml) with DAkkS calibration certificate ph buffer solution 7.00 in dosing bottle (250 ml) with DAkkS calibration certificate

6 testo 206 Technical data / Accessories testo 206-pH3 Set testo 206-pH3, one-hand ph/ C measuring instrument, ph3 probe head with BNC interface, incl. TopSafe and belt/wall holder Sensor type Measuring range Interface General technical data ph electrode / NTC 0 to 14 ph 0 to 80 C (depending on the ph probe used) BNC Operating temperature 0 to +60 C Storage temperature -20 to +70 C Battery life 80 h (Auto Off 10 min) /msp/A/ Weight Display 197 x 33 x 20 mm 69 g LCD, 2 lines testo 206-pH3: ph3 probe head with BNC interface Accessories Accessories for measuring instrument ph universal plastic electrode without temperature sensor ph universal plastic electrode with temperature sensor Glass ph electrode with temperature sensor ph food electrode without temperature sensor Lithium battery button cell Storage solution for ph-electrode, 50 ml ph buffer solution 4.01 in dosing bottle (250 ml) with DAkkS calibration certificate ph buffer solution 7.00 in dosing bottle (250 ml) with DAkkS calibration certificate Subject to change without notice.

7 ph/temperature measuring instrument testo 230 Measurement of ph and temperature in one instrument PH Display of calibration data and error reports Robust and splashproof according to protection class IP54 C Easily legible, 2-line display 1, 2, or 3-point calibration possible The testo 230 combines a complete ph measuring instrument and a full-value temperature measuring instrument in one compact splashproof housing. It reliably records ph values, reduction voltages and temperature in watery solutions as well as in semi-solid to solid media. The instrument has an automatic temperature compensation, and can be calibrated with standard as well as DIN buffers in the ph area. Thanks to the possibility of connecting different ph probes, the testo 230 is universally applicable, not only for applications in the pharmaceutical industry, but also in the food sector and the field of HVAC.

8 testo 230 Technical data / Accessories testo 230 testo 230, analysis instrument, protection class IP54, automatic temperature compensation, incl. 2 electrode clips and battery Sensor type Meas. range ±1 digit Resolution ph 0 to +14 ph ±0.01 ph (0 to +14 ph) 0.01 ph Universal set testo 230 Sensor type Meas. range ±1 digit Resolution NTC -50 to +150 C ±0.5% of mv (+100 to +150 C) ±0.2 C (-25 to C) ±0.4 C (-50 to C) ±0.4 C (+75 to C) 0.1 C testo 230 set: analysis instrument with 2 electrode clips and battery, Testo buffer set ph 4 and 7, 50ml each, universal plastic electrode with temperature sensor plastic set case and batteries General technical data Operating temperature 0 to +40 C Storage temperature -20 to +70 C Display Battery type Battery life Weight Housing material Warranty LCD, 2 lines 9V block battery 100 h 168 x 72 x 27 mm 170 g ABS 2 years Temperature compensation: man. -10 to +150 C; auto -50 to +150 C Accessories for measuring instrument Set case (plastic) for measuring instrument, probes and accessories user-friendly arrangement of measuring instrument and accessories Storage solution for ph-electrode, 50 ml ISO calibration certificate/water analysis for ph buffer solutions; calibration points 4 ph; 7 ph; 10 ph ISO calibration certificate/water analysis at 3 ph values over the measuring range ph buffer solution 4.01 in dosing bottle (250 ml), with DAkkS calibration certificate ph buffer solution 7.00 in dosing bottle (250 ml), with DAkkS calibration certificate

9 testo 230 Probes Probe type Probe shaft/probe shaft tip Measuring range Operating temperature ph / C/ redox electrodes ph universal plastic electrode without temperature sensor Robust and dirt-insensitive ph electrode with single-pore diaphragm; unbreakable plastic, maintenance-free gel-electrolyte, incl. storage cap 0 to +14 ph 0 to +60 C Short-term to +80 C ph universal plastic electrode with temperature sensor Robust and dirt-insensitive ph electrode with single-pore diaphragm, unbreakable plastic, maintenance-free gel-electrolyte, incl. storage cap 0 to +14 ph 0 to +60 C Short-term to +60 C Glass ph electrode with temperature sensor Robust and dirt-insensitive ph electrode with single-pore diaphragm, Glass electrode with excellent chemical resistance, maintenance-free gel-electrolyte, incl. storage cap 0 to +14 ph -10 to +80 C ph food electrode without temperature sensor Robust and dirt-insensitive ph penetration electrode with hole diaphragm, unbreakable plastic coating around glass electrode, maintenance-free food-safe gelelectrolyte, incl. watering cap 95 mm Ø 6.5 mm +2 to +14 ph 0 to +40 C Probe type Probe shaft/probe shaft tip Measuring range t 99 Temperature probes Stainless steel NTC food probe (IP65) with PUR cable, Fixed cable 125 mm 15 mm -50 to +150 C ±0.5% of mv (+100 to +150 C) ±0.2 C (-25 to C) ±0.4 C (remaining range) 8 s Ø 4 mm Ø 3 mm Robust NTC food penetration probe with special handle, reinforced PUR cable, Fixed cable 115 mm Ø 5 mm 30 mm Ø 3.5 mm -25 to +150 C 1) ±0.5% of mv (+100 to +150 C) ±0.2 C (-25 to C) ±0.4 C (remaining range) 7 s ) Long-term measurement range +125 C, short-term +150 C (2 minutes)

10 Cooking oil tester testo 270 Ensure cooking oil quality and save costs Ergonomic and robust design Rinsable under running water (IP65) Clear alarms via backlit display using the traffic light principle Hold and auto-hold function Calibration and adjustment can be carried out by the user %TPM C The cooking oil tester testo 270 easily, quickly and reliably determines the quality of cooking oil. To do so, it measures the so-called "Total Polar Material" (TPM) content in the oil and gives it as a percentage. If the oil is aged, it shows an increased TPM value. As a result, qualitatively inferior deepfried goods are produced. In addition to this, it can contain potentially health-damaging substances. Regular measurement with the testo 270 can prevent this. The use of the measuring instrument also prevents too early replacement of the cooking oil. That reduces the cooking oil consumption by up to 20 %. The new testo 270 stands out thanks to its ergonomic design, which prevents the direct exposure of the hand to the hot oil. The clear alarm via the coloured backlit display makes it even easier to evaluate the quality of the cooking oil: Green means the TPM content is OK. Orange: TPM value is borderline. Red: TPM value exceeded. The TPM limit values can also be individually defined, and can, like other instrument configurations, be protected from inadvertent alteration by a PIN.

11 testo 270 Technical data / Accessories testo 270 Cooking oil tester testo 270 in a case, with reference oil, short instructions, full instruction manual and training card, as well as calibration protocol and batteries Sensor type Measuring range ±1 digit Resolution General technical data Cooking oil operating temperature +40 to +200 C Storage temperature -20 to +70 C Operating temperature 0 to +50 C Testo cooking oil sensor, cap. (%TPM); PTC ( C) 0.0 to 40.0 %TPM +40 to +200 C ±2 %TPM (+40 to +190 C) ±1.5 C (typical, refers to Testo-internal reference, at ambient temperature 25 C) 0.5 %TPM (+40 to +190 C) 0.1 C /msp/A/ Weight Display Battery type 50 x 170 x 300 mm 255 g LCD, 2-line, backlit 2 AAA micro batteries Battery life approx. 25 h continuous operation (corresponds to approx. 500 measurements ) Housing material ABS / ABS-PC fibre glass 10% Reaction time Protection class Calibratability Alarm function Warranty Approx. 30 s IP65 On-site calibration with reference oil ISO calibration by TIS Upper and lower TPM limit value freely adjustable, visual alarm via 3-colour display backlighting (green, orange, red), values and illumination flash in the display until the measurement is ended (Auto Hold) 2 years Subject to change without notice. Accessories for measuring instrument Storage case for testo 270 Reference oil for calibrating and adjusting the cooking oil tester testo 270 (1 x 100 ml) ISO calibration certificate analysis; Calibration points approx. 3 %TPM and approx. 24 %TPM at 50 C

12 Subject to change without notice.