SHELVING SYSTEM SYSTEM AR
|
|
- Scot Owens
- 5 years ago
- Views:
Transcription
1 F34 SHELVING SYSTEM SERIES F R SFETY SFETY shelving depth DOULE LOCKING SFETY MECHNISM The shelving system is fitted with a double locking system to allow only one shelf to be pulled out at one time. The anti-tilt system is based on a bar with safety catches fitted to each upright. Each shelf is fitted with an individual safety catch. The anti-tilt system prevents the movement of any stored items. ay RETRCTLE SHELF CTCH The safety catch locks the shelf into normal or retracted position. This feature prevents the movement of the shelf during handling of stored items. Shelving length catch for normal extension shelves catch for full extension shelves FLOOR SUPPORT PLTE The floor support plate distributes the weight pressure imposed by the upright onto the floor surface technical chart showing flooring and surface requirements is supplied by FMI. T inst t fix SHELF LOD CPCITY label stating load capacity for evenly distributed weight is fitted to each shelf. Example of retractable shelf load label supplied as standard The floor support plate has a fixing hole to allow anchorage to the floor with raw bolts supplied as standard. Floor fixing forms part of the basic safety requirements. Recoended raw bolt tension... 11,65 KN Raw bolt diameter Ø 16 Hole diameter in concrete Ø 16 Minimum hole depth h Minimum fitting depth h nom 95 Max fixable thickness t fix 25 Max torque setting T inst 125 NM h nom h 1 H Min. surface thickness for raw bolt fixing * H: 160 Min. distance of raw bolt from surface edge : 15 Raw bolt influence area or centre distance ** : 112,5 Min dist. of upright from surface edge C: 5 LOD CPCITY PER SINGLE Y The shelving system is supplied with a weight loading table to ensure correct loading. The table indicates: the type of shelving the year of manufacture manufacturer s internal reference number load capacity per bay excluding bay weight. Example of top shelf load label supplied as standard C FLOOR EDGE Example of a standard load table Ø * It is compulsory that the floor surface has sufficient strength to maintain the shelving weight and floor pressure. The surface must be of sufficient strength to allow for raw bolts to be fitted to the floor. ** The area must remain free of any other force. PLUG INFLUENCE ZONE INSTRUCTIONS HNDOOK complete and detailed instructions handbook is supplied standard with the shelving system. This contains the following information: technical data intended use safety information and residue risk areas technical table for calculating the required floor strenght installation and assembly instructions fixing instructions.
2 SHELVING SYSTEM SERIES F R F35 TECHNICL DT NORML EXTENSION : Shelving depth 900, 1100, 1300 : ay width 1250 C: Retractable extension 600, 50, 900 D: Upright width 100 E: Shelving height 1510, 2010, 2210, 2510, 3010 F: Top shelf 50 G: djustable pitch 50 H: Retractable shelf thickness 58 I: Min. distance from the floor 185 L: Min. distance between shelves 300 M: Min. span between shelves 225 N: Foot plate 120 O: Min. distance from top shelf 15 R: Encumbrance 60 Upright sheet steel thickness 3 FULL EXTENSION : Shelving depth 900, 1100, 1300 : ay width 850, 1050, 1250 C: Retractable extension 0, 90, 110 D: Upright width 100 E: Shelving height 1510, 2010, 2210, 2510, 3010 F: Top shelf 50 G: djustable pitch 50 H: Retractable shelf thickness 10 I: Min. distance from the floor 285 L: Min. distance between shelves 300 M: Min. span between shelves 190 N: Foot plate 120 O: Min. distance from top shelf 50 P: Slide height 80 Q: Slide width 100 R: Encumbrance 60 Upright sheet steel thickness 3 Shelving frontal view Shelving frontal view Shelving side view Shelving side view Combination of standard colours 51 blue RL grey RL 000 LOD CPCITY Single bay load capacity: Kg Full extension retractable shelf load capacity: Kg Normal extension retractable shelf load capacity: Kg Top shelf load capacity for 900 depth: Kg Top shelf load capacity for 1100 depth: Kg Top shelf load capacity for 1300 depth: Kg 02 green RL 6011 EXTR FIXING SET FOR ONE UPRIGHT Fixing material including no. 2 steel floor bolts M16x140 for uninterrupted concrete floors equal to or higher than class: 25 / RK250 / MP 25N for 2. ORD. NO. F R KEY RL RL 000 F RL 6011 F ll indicated loads are net and refer to evenly distributed weights
3 F36 SHELVING SYSTEM COMPONENTS SERIES F R 2 DEPTH = 900 / 1100 / Full extension shelf see page F38-F39 Normal extension shelf see page F UPRIGHTS TOP SHELVES ORD. NO. HEIGHT DEPTH ORD. NO. LOD CPCITY kg DIMENSIONS F R F R F R F R F R F R F R F R F R F R F R F R F R F R F R Fixing materials composed by 2 expanding steel screws M16x140 supplied as standard. ays supplied unassembled. F R x900x50 h F R x1100x50 h F R x1300x50 h F R x900x50 h F R x1100x50 h F R x1300x50 h F R x900x50 h F R x1100x50 h F R x1300x50 h The shelves in this series are supplied with load labels. EXTR FIXING SET FOR ONE UPRIGHT Fixing material including no. 2 steel floor bolts M16x140 for uninterrupted concrete floors equal to or higher than class: 25 / RK250 / MP 25N for 2. ORD. NO. F R RL 000 F RL 6011 F RL 5012 F KEY Spare fixing set for one upright see page F35 ll indicated loads are net and refer to evenly distributed weights
4 SHELVING SYSTEM COMPONENTS SERIES F R F3 DEPTH = 900 / 1100 / HORIZONTL DISTNCE TIE RS FOR NORML EXTENSION SHELVES ORD. NO. Y WIDTH F R bars for each bay are needed 4 HORIZONTL DISTNCE TIE RS FOR FULL EXTENSION SHELVES ORD. NO. Y WIDTH F R F R F R bars for each bay are needed 5 CROSS RCING ORD. NO. HEIGHT UPRIGHT Y WIDTH F R F R F R F R F R F R F R F R F R F R F R F R F R F R F R cross bracing must be fitted to each second bay SINGLE DRWER OPENING SYSTEM The single drawer opening system forms a standard part of this shelving system. The system prevents the operator from retracting more than one shelf at one time. The system comprises a locking bar as the same height of the upright and one locking catch per retractable shelf. Each bay requires one locking bar and one safety catch per retractable shelf (hooks are standard supplied with the retractable shelf). Standard colours grey Ral 000 or green Ral R ORD. NO. UPRIGHT HEIGHT F R F R F R F R F R LOCKING CTCH Locking catch are standard supplied with the retractable shelf INFO RL 000 F RL 6011 F
5 F38 SHELVING SYSTEM COMPONENTS SERIES F R FOR Y 850 / 1050 / 1250 WIDTH FULL EXTENSION SHELVES WITH 3 EDGES FOR Y 850 WIDTH F R F R F R FOR Y 1050 WIDTH F R F R F R FOR Y 1250 WIDTH F R F R F R The extension shelves in this series are supplied with load labels. RL 000 F RL 6011 F KEY ll indicated loads are net and refer to evenly distributed weights
6 SHELVING SYSTEM COMPONENTS SERIES F R F39 FOR Y 850 / 1050 / 1250 WIDTH FULL EXTENSION SHELVES WITH 4 EDGES FOR Y 850 WIDTH F R F R F R FOR Y 1050 WIDTH F R F R F R FOR Y 1250 WIDTH F R F R F R FULL EXTENSION SHELVES WITH 4 SIDES ND MULTIPLEX WOODEN TOP FOR Y 850 WIDTH F R F R F R FOR Y 1050 WIDTH F R F R F R FOR Y 1250 WIDTH F R F R F R
7 F40 SHELVING SYSTEM COMPONENTS SERIES F R FOR Y 1250 WIDTH NORML EXTENSION SHELVES WITH 3 EDGES FOR Y 1250 WIDTH F R F R F R Load capacity: 800 kg 1250 NORML EXTENSION SHELVES WITH 4 EDGES FOR Y 1250 WIDTH F R F R F R Load capacity: 800 kg 1250 NORML EXTENSION SHELVES WITH 4 SIDES ND MULTIPLEX WOODEN TOP FOR Y 1250 WIDTH F R F R F R Load capacity: 800 kg 1250 CK PNELS Shelving ack panel ay height consisting of width ORD. NO. sections no. F R F R F R F R F R F R F R F R F R F R F R F R F R F R F R back panel must be fitted to each 2 bays RL 000 F RL 6011 F KEY ll indicated loads are net and refer to evenly distributed weights
8 SHELVING SYSTEM COMPONENTS SERIES F R F41 HEIGHT 1510 / 2010 / 2210 / 2510 / 3010 SIDE PNELS Shelving Side panel ay height required q.ty width ORD. NO. of sections F R F R F R F R F R F R F R F R F R F R F R F R F R F R F R SLIDING DOORS Shelving Shelf ay Shelving height thickness width width F R F R F R F R F R F R F R F R F R F R F R F R F R F R F R Supplied with cylinder lock and 2 keys. This type of door closes 2 bays SUPPLEMENTRY PRTS Spare key. lways indicate the number on the cylinder lock of the key to be replaced. ORD. NO. R CSC Master key. This type of key opens all the 45 and 46 series locks. ORD. NO. R CSC RL 6011 F RL 5012 F
Cabinets G " integrated in upright Handle strip in side panel Easy solution for shortened doors
Overview... 0 Cabinets... 1 Cabinets Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 Subracks/ 19" chassis... 6 02002002 Front panels,
More informationCabinets NOVASTAR. Overview Cabinets Wall mounted cases Accessories for cabinets and wall mounted cases 3.
Overview..... 0 NOVASTAR Cabinets NOVASTAR Cabinets...... 1 Wall mounted cases........ 2 Accessories for cabinets and wall mounted cases 3 Climate control 4 Desk-top cases 5 Subracks/ 19" chassis... 6
More informationMain Catalogue. Edition 23, chapter minirack: Phase-out product!
Edition 23, chapter minirack: Phase-out product! Overview... 0 Cabinets... 1 G Cabinets G Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases...
More informationCabinets Novastar OVERVIEW MAIN KATALOG LIGHT - SLIM - ROBUST. Cabinets Wall mounted cases... 2
Novastar NovastarMain CataloguePart number in bold face type: ready for despatch within 2 working dayspart number in normal type: ready for despatch within 10 working days Cabinets Novastar OVERVIEW MAIN
More informationStructural Calculations for Juliet balconies using BALCONY 2 System (Aerofoil) handrail. Our ref: JULB2NB Date of issue: March 2017
Juliet balconies using BALCONY 2 System (Aerofoil) handrail PAGE 1 (ref: JULB2NB280317) Structural Calculations for Juliet balconies using BALCONY 2 System (Aerofoil) handrail Our ref: JULB2NB280317 Date
More information40 CD RANGE FLUSH-MOUNTING DISTRIBUTION BOARDS AND ENCLOSURES
DISTRIBUTION BOARDS FLUSH-MOUNTING DISTRIBUTION BOARDS GWTEST SOFTWARE (see page 322) Complementary system items Ordinary installation - protected flush mounting DISTRIBUTION / JUNCTION Protection devices...
More informationQUAKE BRAKE TM MODEL QBC-12 SEISMIC SWAY BRACING KIT FEATURING
QUAKE BRAKE TM MODEL QBC-12 SEISMIC SWAY BRACING KIT FEATURING The QUAKE BRAKE TM Seismic Dampening Device. The QUAKE BRAKE TM was Certified NEBS Level 3 Zone Compliant after being tested in accordance
More informationThe OCTANORM system components set a new standard in shop design.
O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories
More informationER2 Short-head Electric Chain Hoist
O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in
More informationThe innovative 19" electronics cabinet
The innovative 19" electronics cabinet CONTENTS Pentair Technical Products. Pentair Technical Products, a global business unit of Pentair Inc., is a leading supplier of product and service solutions worldwide
More informationColumn w/laterals. Steel Column A992 50ksi Steel (see sheets 4-7)
olumn w/ SOREOR HEIGHT WITH ddtional display area consisting signs, arches, message centers or video above or below the scoreboard. (see sheets -6) for column and pier sizing) TOP SOREOR SETION Overall
More information2D - STRIP ANCHOR LIFTING SYSTEM
2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU UNIVERSAL
More informationHudevad P100. Technical datasheet
Technical datasheet Key benefits Available in three depths Highly flexible in use Integrated top grille Harmonious and finished look Kundenedfal Low, streamlined design Ideal in front of glazing to prevent
More informationGRC. Circular egg crate grille for transfer/extract air and wall/ceiling mounting QUICK FACTS
Circular egg crate grille for transfer/extract air and wall/ceiling mounting QUICK FACTS For exhaust air 91% free area Handles large airflows Cleanable Can be used with commissioning box ALS Standard colour
More informationInstallation instructions, accessories. Snow chains
Instruction No 30664147 Version 1.0 Part. No. Snow chains R7700468 страница 1 / 15 Equipment A0000162 R7700458 страница 2 / 15 R7700448 страница 3 / 15 INTRODUCTION Read through all of the instructions
More informationE Service E-Series Padlock seires PadlockManual No. Part No. Part No. Part
E-Series Padlock E Service seires Manual Padlock 0 No. Part No. Part No. Part Padlock body Locking plate Ball bearing 0 Shackle Bumper 0 Socket head screw Mx0 Activator cam Identification plate Spring
More informationFlow rates to 590 l/min
LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball
More informationTechnical information CONCRETE / SOLID STONE. Reaction resin mortar, epoxy-acrylate-based with styrene USAGE INSTRUCTIONS
CONCRETE / SOLID STONE USAGE 1. AREAS OF APPLICATION Heavy load-carrying attachments in solid stone, concrete, porous concrete and light concrete Suitable for attachment points close to the edge, since
More informationPART III DRAWINGS AND PHOTOGRAPHS Note: Drawings are intended to be as accurate as possible; however, Contractor is responsible for insuring that all items will fit as shown. Bulkhead DRIVER SIDE Bulkhead
More informationcleanroom systems exhibition systems interior design systems software and service presentation systems
I n n o va t i v e f a b r i c t e n s i o n e x t r u s i o n s f r o m O C TA N O R M exhibition systems interior design systems presentation systems cleanroom systems software and service M A G N I
More informationThe NRC Lift/Transport system
The NRC Lift/Transport system Manufactured by: Dynamic Design Pharma Laguna Niguel, California www.dynamicdesignpharma.com System Description The NRC Lift/Transport System is a transport and lifting device
More informationEAS 664/4 Principle Structural Design
UNIVERSITI SAINS MALAYSIA 1 st. Semester Examination 2004/2005 Academic Session October 2004 EAS 664/4 Principle Structural Design Time : 3 hours Instruction to candidates: 1. Ensure that this paper contains
More informationSWIFT Ceiling. Square ceiling air diffuser for supply air QUICK FACTS
Square ceiling air diffuser for supply air QUICK FACTS Flush design Also available in a version for extract air. Designed for modular suspended ceilings (600 x 600 mm) Quick Access Adapter for systemized
More informationSWIFTTM. Ceiling. Square ceiling air diffuser for supply air
SWIFTTM Ceiling SWIFT Ceiling Square ceiling air diffuser for supply air Quick facts Flush design Also available in a version for extract air. Designed for modular suspended ceilings (600 x 600 mm) Quick
More informationHilti HSV-F Stud anchor
Product Data Sheet Hilti Anchor version Benefits torque-controlled mechanical expansion allows immediate load application HSV-F Carbon steel, hot dipped galvanised, min 42 microns coating thickness setting
More informationPLATE GIRDERS II. Load. Web plate Welds A Longitudinal elevation. Fig. 1 A typical Plate Girder
16 PLATE GIRDERS II 1.0 INTRODUCTION This chapter describes the current practice for the design of plate girders adopting meaningful simplifications of the equations derived in the chapter on Plate Girders
More informationFormulae and examples of calculation
Shock absorber Formulae and examples of calculation A shock absorber decelerates linearly. Roughly 90% of shock absorber applications can be modelled if the following 4 factors are known: 1. Mass to slow
More informationKrantz Components. Twist outlet DD-N... for ceiling installation. Air distribution systems
Krantz Components Twist outlet DD-N... for ceiling installation Air distribution systems DS E 0. Twist outlet Preliminary remarks and construction design Preliminary remarks Twist outlets for ceiling installation
More informationIBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationIBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationAIR BREATHER FILTERS. Temperature from -25 to +100 C
IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
More informationSection Installation accessories. > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series
Section > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series 22 23 > CABLE GLANDS WITH DEVICE TO PREVENT ANY UNSCREWING UNION Series B (*) IP8 (1 bar) C A in mm A B
More informationDECLARATION OF PERFORMANCE
EN DECLARATION OF PERFORMANCE DoP No. Hilti HUS3 0672-CPD-0361 1. Unique identification code of the product-type: Hilti Screw Anchor HUS3 2. Type, batch or serial number as required pursuant to Article
More informationHT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
More informationST T indoor batten fluorescent light fitting. USE ADVANTAGES IP20
... indoor batten fluorescent light fitting. USE The light fitting is suitable for assembly and production shop floors, supermarkets, warehouses and hallways. The light fitting is suitable for composing
More information* * Front of Paint Desk SET REQUIRES VULCAN RACKING Dept: 24 Class: 7. Applicators - Specialty Applicators. Bay 2.
Class: Bay.1 1 1 Safety Text: Safety:*Slat wall and vertical displays incorporating sheet goods must be secured to the racking uprights (not cross braces) using drop-in fasteners, bolts and nuts with washers
More informationFORMWORK SAVINGS ADAPTABILITY LIGHT WEIGHT ECONOMICAL ALUMINIUM SLAB FORMWORK. BV Cert
FORMWORK SAVINGS ADAPTABILITY LIGHT WEIGHT ECONOMICAL ALUMINIUM SLAB FORMWORK BV Cert. 6150814 Dalphi Economical aluminium slab formwork 2 FORMWORK The economical, high-performance Dalphi floor formwork
More informationGTH. Rectangular double deflection grille QUICK FACTS
Rectangular double deflection grille QUICK FACTS For supply air Adjustable air deflectors Cleanable Installed using mounting frames FHB / FHA or commissioning box TRG Available in alternative colours A
More informationWausau WW2452. R.H. snow plow, Make & Model. Nose height 24" Discharge height 52" Plow throat depth from vertical to deepest point 20"
R.H. snow plow, Make & Model PRICE SCHEDULE 6.0 Right Hand Snow Plow Wausau WW2452 Nose height 24" Discharge height 52" Plow throat depth from vertical to deepest point 20" Plowing angle 45-55-60 Degree
More information2D - STRIP ANCHOR LIFTING SYSTEM
2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM alterations reserved Feb-18 Page 1 PRODUCT RANGE LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU SA-TTU 12.5 kn Page 15 Page 20 Page 23 Page 26 SA-TU-HP
More informationMPT Multifunction Multiport
MP Multifunction Multiport Maximum pressure 8 bar F l o w r a t e s t o 0 0 l / m i n echnical data housing (Materials) ead: luminium Cover: Nylon Bowl: Nylon Pressure Working pressure: 8 bar emperature
More informationA.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual
70 8TH AVE W PO BOX 7 SPENCER, IA 0 PHONE: 7-6-9 FAX: 7-6-08 SERVICE: 800-8- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER 0-00 BLACK MODEL
More informationKirncroft Security Doors
Kirncroft Security Doors Weather kit fitting instructions There are two parts to the weather kits: the drip guard and the weather strip. 1 Weather Strip 2 Drip Guard External Opening Doors On external
More informationMECHANICS OF MATERIALS. Prepared by Engr. John Paul Timola
MECHANICS OF MATERIALS Prepared by Engr. John Paul Timola Mechanics of materials branch of mechanics that studies the internal effects of stress and strain in a solid body. stress is associated with the
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationG-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
More informationMetal air breather filter
Series S Metal air breather filter 4 H 5 6 7 H H S (Materials) Screw: Galvanised Steel Washer: Teflon Cover: Steel 4 Filter element: Impregnated paper 5 Ring: Galvanised Steel 6 Seal: R 7 Connection: nodised
More informationAIR BREATHER FILTERS. Temperature from -25 C to +100 C
IR RETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
More informationGRANT COUNTY PORT DISTRICT NO. 1 GRANT COUNTY
GRNT COUNTY PORT DISTRICT NO. GRNT COUNTY WSHINGTON PORT COMMISSIONERS Curt. Morris President rian. Kuest Secretary Patric F. Connelly Vice President 80 IRON HORSE COURT YKIM, WSHINGTON 9890 (509) 45-48
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationBallistic pendulum Operating Instructions Fig. 1: Ballistic pendulum SAFETY PRECAUTIONS
R Ballistic pendulum 11229.00 PHYWE Systeme GmbH & Co. KG Robert-Bosch-Breite 10 D-37079 Göttingen 6 3.8 3.7 3.6 3.5 Phone +49 (0) 551 604-0 Fax +49 (0) 551 604-107 E-mail info@phywe.de Internet www.phywe.de
More informationM-3: Statics & M-10 Elasticity
Group member names This sheet is the lab document your TA will use to score your lab. It is to be turned in at the end of lab. To receive full credit you must use complete sentences and explain your reasoning
More informationService Information Letter SIL # 017
Service Information Letter SIL # 017 Trunnion Adjustment - Double Barrels Only Equipment: Double Barrels With Sloped Trunnions Date Issued: 9-24-03 Additional Reference: SIL # 016 Revised: Revision #:
More informationChapter-Content Page 14.0 Surface Mounted Boxes 14.1 Flush Mounted Boxes 14.2 Distribution Pillar
Outdoor Distribution Cabinets 14.0 Chapter-Content Page 14.0 Surface Mounted Boxes 2 14.1 Flush Mounted Boxes 9 14.2 Distribution Pillar 10 23 14 http://www.krone-gmbh.at - Page 1 14.0 Surface Mounted
More informationTHE VIPER ATV PLOW SYSTEM
THE VIPER ATV PLOW SYSTEM SKU : SY_PL50(BK, RE, YE) SY_PL54(BK, RE, YE), SY_PL60(BK, RE, YE) 23001 Industrial Blvd Rogers, MN 55374 I. THE VIPER PLOW System Overview The VIPER PLOW system is broken up
More informationOctober 30-31, 2014 Paris
October 30-31, 2014 Paris Rittal Open Rack Solution Andy Gill & Paul Clements Rittal VP Engineering (Andy), Lead Design Engineer (Paul) Rack - Overview Key Rack Features Include : - Loading to 1400KG 2
More informationPELICAN Ceiling. Square ceiling air diffuser for supply air and extract air QUICK FACTS
Square ceiling air diffuser for supply air and extract air QUICK FACTS Flexible distribution pattern, yet the acoustic data remains the same One K-factor regardless of distribution pattern Designed for
More informationDial removed for clarity
8 7 4 1 18 19 15 1 9 24 21 24 29 17 14 20 21 29 23 22 3 40 22 25 2 44 41 39 2 32 12 33 13 12 31 43 42 ITEM QTY PART NO. DESCRIPTION 1 1 Back 2 1 Front 3 3 Spacer top 4 1 Pendulum hanger 5 1 Clock dial
More informationMechanics of Materials Primer
Mechanics of Materials rimer Notation: A = area (net = with holes, bearing = in contact, etc...) b = total width of material at a horizontal section d = diameter of a hole D = symbol for diameter E = modulus
More informationCompact Orifice FlowMeter
Steam Data Reference Tables IM/OM/SDT Issue 1 Compact Orifice FlowMeter ABB The Company We are an established world force in the design and manufacture of instrumentation for industrial process control,
More informationMatlab Sheet 2. Arrays
Matlab Sheet 2 Arrays 1. a. Create the vector x having 50 logarithmically spaced values starting at 10 and ending at 1000. b. Create the vector x having 20 logarithmically spaced values starting at 10
More informationSLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY
SGL YPE he N slide is a linear motion earing utilizing the rotational motion of all elements along four rows of raceway grooves. It can e used in various applications due to its compactness and high load
More informationPROBLEMS. m s TAC. m = 60 kg/m, determine the tension in the two supporting cables and the reaction at D.
1. he uniform I-beam has a mass of 60 kg per meter of its length. Determine the tension in the two supporting cables and the reaction at D. (3/62) A( 500) m (5 23) m m = 60 kg/m determine the tension in
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter
More informationShared on QualifyGate.com
GTE 014 Brief nalysis (Based on student test experiences in the stream of ME on 16th February, 014 - Second Session) Section wise analysis of the paper 1 Mark Marks Total No of Questions Engineering Mathematics
More informationDN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page
More informationHELLA. Linear slot diffuser. Ordering codes. HELLA - Linear diffuser. Linear Diffusers 1 / 18. Example of the ordering code HELLA B-0-0-AN
Linear Diffusers / 8 HELLA Linear slot diffuser Ordering codes HELLA - Linear diffuser HELLA - Number of slots... Diffuser length L (mm) ) Increment mm... Deflector colour Damper Diffuser construction
More informationALC. ALBATROSS Supply air terminal for large airflows
ALBATROSS Supply air terminal for large airflows Quick facts Large airflows Suitable for cooling or heating Manual or motorised adjustment Pressure drop independent of selected spread pattern Can be used
More informationExperiment Instructions. Deformation of Frames
Experiment Instructions SE 0.20 Deformation of Frames Experiment Instructions This manual must be kept by the unit. Before operating the unit: - Read this manual. - All participants must be instructed
More informationDESIGN AND DETAILING OF COUNTERFORT RETAINING WALL
DESIGN AND DETAILING OF COUNTERFORT RETAINING WALL When the height of the retaining wall exceeds about 6 m, the thickness of the stem and heel slab works out to be sufficiently large and the design becomes
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationBuild a Model ANDRILL Site
Activity 3A - Build a Model ANDRILL Site Build a Model ANDRILL Site Preview To understand and demonstrate how scientists drill and retrieve rock cores from beneath ice and seawater around Antarctica, you
More informationJob No. Sheet No. Rev. CONSULTING Engineering Calculation Sheet. Member Design - RC Two Way Spanning Slab XX
CONSULTING Engineering Calculation Sheet E N G I N E E R S Consulting Engineers jxxx 1 Material Properties Characteristic strength of concrete, f cu ( 60N/mm 2 ; HSC N/A) 35 N/mm 2 OK Yield strength of
More informationSection 8 Column radiators
Section s Description Connections Standard without built-in valve -or- Version with built-in valve Air vent, Drain Fixing and mounting Pressure versions, Fittings, Surface finishes, Special versions eat
More informationImportant Instructions
Important Instructions Subject Use With Cabinet Hardmount Trunnion Replacement Cabinet Hardmount 8-60 Pound Washer-Extractors and Kits F77000, F7700, F7700, F7700, F7700, F7700, F9P and F9P WARNING This
More informationMaximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
More informationSLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY
SGL YPE he N slide is a linear motion earing utilizing the rotational motion of all elements along four rows of raceway grooves. It can e used in various applications due to its compactness and high load
More informationBall screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance
Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low
More informationCH. 5 TRUSSES BASIC PRINCIPLES TRUSS ANALYSIS. Typical depth-to-span ratios range from 1:10 to 1:20. First: determine loads in various members
CH. 5 TRUSSES BASIC PRINCIPLES Typical depth-to-span ratios range from 1:10 to 1:20 - Flat trusses require less overall depth than pitched trusses Spans: 40-200 Spacing: 10 to 40 on center - Residential
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationC-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
More informationVan Beest offers a wide range of turnbuckles, i.e.:
Turnbuckles Applications Turnbuckles are normally used for rigging or tensioning of wires, ropes, rods etc. Turnbuckles are designed for straight or in-line rigging, tensioning or lashing only. Range Van
More informationPART-A. a. 60 N b. -60 N. c. 30 N d. 120 N. b. How you can get direction of Resultant R when number of forces acting on a particle in plane.
V.S.. ENGINEERING OLLEGE, KRUR EPRTMENT OF MEHNIL ENGINEERING EMI YER: 2009-2010 (EVEN SEMESTER) ENGINEERING MEHNIS (MEH II SEM) QUESTION NK UNIT I PRT- EM QUESTION NK 1. efine Mechanics 2. What is meant
More informationStructural Steelwork Eurocodes Development of A Trans-national Approach
Structural Steelwork Eurocodes Development of A Trans-national Approach Course: Eurocode Module 7 : Worked Examples Lecture 0 : Simple braced frame Contents: 1. Simple Braced Frame 1.1 Characteristic Loads
More informationChapter 1 Introduction- Concept of Stress
hapter 1 Introduction- oncept of Stress INTRODUTION Review of Statics xial Stress earing Stress Torsional Stress 14 6 ending Stress W W L Introduction 1-1 Shear Stress W W Stress and Strain L y y τ xy
More informationCIRCO. Sound-attenuating transfer unit QUICK FACTS
Sound-attenuating transfer unit QUICK FACTS Supplied in pairs For the transfer of air through a wall Fits in a circular cut opening Simple to install Mounting frame integrated into the transfer diffuser
More informationVisit any one of our 30 locations or visit us on line at
TYPE IA ALUMINUM 2886509079 2886501870 2886510013 2886510010 2886510014 2886504441 AS3002 2' TYPE IA AS3003 3' TYPE IA AS3004 4' TYPE IA AS3006 6' TYPE IA AS3008 8' TYPE IA AS3010 10' TYPE IA 34.99 57.99
More informationDN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore Materials
More informationSUPPLY, ERECTION & COMMISSIONING OF 2 X 3.15 MVA 33/11KV SUB-STATION at Khuntlipalli,Bargarh ( PACKAGE - B )
SUPPLY, ERECTION & COMMISSIONING OF 2 X 3.15 MVA 33/11KV SUB-STATION at Khuntlipalli,Bargarh ( PACKAGE - B ) Sl. 1 2 Description of Work Supply,Erection & Commissioning of 2 x 3.15 MVA, New 33/11 KV Primary
More informationTUTORIAL SHEET 1. magnitude of P and the values of ø and θ. Ans: ø =74 0 and θ= 53 0
TUTORIAL SHEET 1 1. The rectangular platform is hinged at A and B and supported by a cable which passes over a frictionless hook at E. Knowing that the tension in the cable is 1349N, determine the moment
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationPLAY OFF 48" FOOSBALL TABLE ASSEM BLY I NSTRU CTI ONS
PLAY OFF 48" FOOSBALL TABLE ASSEM BLY I NSTRU CTI ONS NG1031F THANK Y OU! Th a n k yo u f o r p u r ch a si n g t h i s p r o d u ct. We w o r k a r o u n d t h e cl o ck a n d a r o u n d t h e g l o
More informationWater Closet Carrier System Anchor Pull-out Force Calculations
The intent of this document is to display calculated pull-out forces applied to anchors that are embedded in concrete and utilized in the installation of Zurn floor-affixed water closet carrier systems.
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationNOP, NOT and NOX. Adaptable, flexible supply air diffusers with ultra low height for free installation. climecon.fi 07.16
NOP, NOT and NOX Adaptable, flexible supply air diffusers with ultra low height for free installation 07.16 NOP, NOT and NOX The most outstanding features of the NOP, NOT and NOX supply air diffusers are
More informationTRIPPLE CYLINDER VERTICAL STEAM ENGINE DESIGNED BY Mr A. ZEVENHUIZEN, HEEMSKERK
TRIPPLE CYLINDER VERTICL STEM ENGINE DESIGNED BY Mr. ZEVENHUIZEN, HEEMSKERK THIS ENGINE WS REDRWN USING SOLIDWORKS DTED 01/0/1 DTE NVM DWG No JNURY 0.01.01 ( SHEETS) COMMENTS THIS STEM ENGINE WS PUBLISHED
More informationDESIGN OF STORAGE AND MATERIAL HANDLING SYSTEM FOR PIPE INDUSTRY A CASE STUDY
DESIGN OF STORAGE AND MATERIAL HANDLING SYSTEM FOR PIPE INDUSTRY A CASE STUDY Mr.S.S.Chougule 1, Mr.A.S.Chavan 2, Miss.S.M.Bhujbal 3, Mr.K.S.Falke 4 Prof.R.R.Joshi 5, Prof.M.B.Tandle 6 1,2,3,4 Student,
More informationS E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S
1. P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S Helical foundation pile includes a lead and extension(s). The lead section is made of a central steel
More informationStress Strain Elasticity Modulus Young s Modulus Shear Modulus Bulk Modulus. Case study
Stress Strain Elasticity Modulus Young s Modulus Shear Modulus Bulk Modulus Case study 2 In field of Physics, it explains how an object deforms under an applied force Real rigid bodies are elastic we can
More information