I N T R O D U C T I O N T O

Transcription

1 A. La Rosa Lecture Notes SU-hysics H 411/511 ECE 598 I N T R O D U C T I O N T O Q U A N T U M M E C H A N I C S How does light "really" decides which path to follow? An elementary Quantum Dynamics point of view Reference: Richard Feynman, QED, The strange theory of light and matter, rinceton University ress (1985). Feynman Lectures, Vol-I, Chapter 26, "Optics: The rinciple of Least Time." Section In this section we describe the connection between i) the quantum mechanics concept of amplitude probabilities and ii) the classical variational principle Amplitude robability CASE: Tracing light from point source S to point via reflection on a mirror This time we consider that light does not seem to behave as a wave (in the sense described by the Huygens or the double slit experiments). Instead, light rays seem to be made out of photons (as revealed by the photoelectric effect experiment), which are detected in discrete quantities by a photon counter. A new model to predict the way in which light propagates. Feynman presents a version of what is believed it really happens, from an elementary quantum dynamics point of view: The arrival of a photon starting at S and ending at is probabilistic. That is, in the situation shown in Fig. 1 below, there are many paths possible for a photon leaving S to arrive, via one reflection on the surface. One of those possible paths is shown in Fig. 1 S X Mirror

2 Fig. 1 articular geometrical rectilinear path available for a photon to travel from S to, via reflection on the mirror. (X is an arbitrary point on the mirror.) The calculation of the probability is as follows. All arbitrary paths S mirror are possible. (Figure shows only straight line paths, but, in general, any curved path can be considered.) For a particular path SX (where X is an arbitrary point at the mirror) an AMLITUDE ROBABILITY A(SX) is assigned to it. A(SX) = e i (1) where t(x) is the angular frequency of the light t(x) is the time taken by the light if it were to follow the particular path SX. is determined by the path traversed (we will assume it does not have a major effect in calculating A (SX) We will argue below that the phase plays a more preponderant role. Since all the possible events are characterized by the same initial state (photon leaving S), and final state (photon arriving at ), the total amplitude probability is obtained by adding all the individual amplitudes, Total amplitude probability = X (photon starts at S and arrives at ) A(SX) = X e i X (2) The summation is over all the points X on the mirror Expression (2) is then an addition of phasors whose phase (x) will be determined by the corresponding time of travel. A graphical construction of this total phasor is given in the figure below.

3 S X A(SX) X Mirror e i X Fig. 2 A complex number is attached to each path. The addition of all these complex numbers (corresponding to all the possible paths) gives the total amplitude probability. The probability that a photon starting at S ends at is given by the magnitude square of the phasor given in expression (2). prob (S ) = X A(SX) 2 (3) Amplitude robability and the Variational rinciple How does this ultimate picture of photons and amplitude probability relate to the variational principle? As an example let s evaluate graphically the total phasor indicated by expression (2) but take just a few representative paths. First, from our experience of using the classical Fermat s principle, we know that the time of travels varies like this, t A B C D E

4 S S A B C D E F For paths neighbor to S A the corresponding phasors will change dramatically from one path to the next because the time of travel vary substantially even for neighbor paths A B C D E F For paths neighbor to S E (similarly) A E For paths closer to the one that makes the optical path stationary, the time does not change drastically; so the corresponding phasors align each other S A B C D E F C The paths that are neighbor to the classic path are the ones that contribute the most to the (complex) amplitude probability. We see here, therefore, the connections between the quantum mechanics concept of amplitude probabilities and the classical variational principle. A C

5 Quantum Electrodynamics (QED) Reference: The following description is taken from Feynman, QED, The strange theory of light and matter, rinceton University ress (1985). Quantum mechanics was a tremendous success (could explain chemistry). However, the description of light-matter interaction still faced difficulties. [Maxwell theory of electricity and magnetism had to be changed to be in accord with the new properties of quantum mechanics. The theory of light-matter interaction, called quantum electrodynamics was finally developed in 1929]. But the theory was troubled. Right after Schrodinger, Dirac developed a relativistic theory of the electron that did not take into account the effects of the electron s interaction with light. But it was expected to provide a good starting point. Quantum electrodynamics was straightened out by Julian Schwinger, Sin-Itiro Tomonaga and Feynman in This is the theory that Feynman describes in his QED, The strange theory of light and matter, rinceton University ress (1985). Such theory has been tested over a wide range on conditions. Aside from gravitation and nuclear physics, QED can explain every phenomenon accurately. QED is also the prototype for new theories that attempt to explain things going on inside the nuclei of atoms. It turns out, quarks, gluons,, etc. all behave in a certain style, the quantum style. F1. QED analysis of light phenomena hotons: articles of Light QED considers light to be made of particles (as Newton originally thought), but the price of this great advancement of science is a retreat by physics to the position of being able to calculate only the probabilities that a photon will hit a detector. Event: Light travels from the source S, reflects from the surface at X, and arrives to the detector at D We assign an amplitude probability (a complex number) that such an event will occur. n=1 D S 1 m x X Fig. Light reflected from a mirror QED RULE-1 (Assignment of amplitude probability)

6 How to do such an amplitude probability assignment? i) ictorial view We assign to the amplitude probability an arrow. To obtain the arrow we do the following: Let s imagine that we have a stopwatch that can time a photon as it moves. It has a handle that moves rapidly. When the photon leaves the source, we start the watch. As long as the photon moves, the handle turns. When the photon arrives at the detector we stop the watch. The handle ends up pointing in a certain direction. We then draw a corresponding arrow of magnitude 1 (blue arrow in the figure). ii) More formal view Amplitude probability A(SX) = e i t X) (photon starts at S and arrives at D via the path S X ) where is the angular frequency of the light and t(x) is the time the light takes to travel via SX. (1) That is, a phasor e i t X) (a complex number) is assigned to the amplitude probability A. QED RULE-2 (For events that have the same initial and final states) Since the photon has many optional paths available to go from X, the total amplitude probability is given by, Total amplitude probability A all X (photon starts at S and arrives at via any path joining S and ) A(SX) = X e i t X) (2) where is the angular frequency of the light and t(x) is the time light takes to travel from S to passing through X (the latter located at the interface). QED RULE-3 The probability for an event to occur is given by the square of 2 the final amplitude: = A (3) Consider the reflection of light coming from a surce S and reaching a detector via reflection from a mirror. We want to calculate the chance that the detector will make (4) a click after a photon has been emitted by the source

7 Classical view: The mirror will reflect light where the angle of incidence is equal to the angle of reflection Classical way: In the graph above, it would appear that the ends of the mirror contribute to nothing to the reflection phenomena. QED view: Every possible path contributes to the amplitude probability. Should the reflections path involving the center of the mirror have more weight than the once reflecting from the edges? Answer: No. All the path have equal chance. QED view: QED view assigns an equal amplitude probability to each possible path For the analysis of a mirror, an infinite number of path would have to be considered. To simplify the problem, let s divide the mirror into a number of smaller discrete strips.

8 S Each amplitude will be represented by an arrow of a standard (arbitrary) size While the size of the arrow will be essentially the same, its orientation will be different for the different reflection point selected. This is because it takes a different time for as photon to go through a different path that has different length.

9 C D A B E F Top: Figure shows each possible path the photon could take to go from the source to that point in the mirror and then to the detector. Middle: A plot of the corresponding time for each possible path. Below the graph is the direction of each amplitude probability (arrow). Bottom: The result of adding all the arrows. Notice the major contribution to the total arrow comes from arrows E through I, whose directions are nearly the same because the timing of their path is nearly the same. This also happens to be where the total time is least. It is therefore approximately right to say that light goes where the time is least. G H I L J K Why do the edges appear to make no contribution?

10 We zoom in to see in more detail the contribution to the total amplitude probability from the edges of the mirror. Notice when the arrows are added, they go in a circle, hence adding up nearly to nothing. The above gives us a clue to engineer a way to get contribution from th e edges. As we move from left to right, we notice the arrows have a bias orientation to the right then to the left, and so on. If only the section with arrows biased to the right are kept (etching away the sections with arrows to the left), then a substantial amount of light will be reflected. Such a mirror with preferentially etched regions is called a diffraction grating.

11