tel.: , fax: , mobile:

Transcription

1 EFFECTIVENESS IS OUR GOAL. In order to achieve that, we have developed an entire range of photoluminescent products, of various parameters and applications, serving for the effective marking of evacuation routes and the location of fire-fighting equipment. In terms of their photometric parameters, these products might be divided into the three basic groups: SL/2 they meet with a substantial surplus the requirements of the norms: PN/92/01,02,04 and also in the norm: DIN They are intended to be used for the marking of premises, both well-lighted and with the average level of glowing. SL/5 are intended to be used for the marking of premises lighted at certain times or very poorly (hospitals, clinics, warehouses, hotel corridors, underground passages, for constructing the Low Location Lighting LLL and also for the marking of ships, also including building LLL systems). SL/8 are intended to be used for marking in special conditions. Apart from very high photometric parameters, they meet high requirements relevant to: surface inflammability and toxic properties. They are installed on non-inflammable foundations with the intention to be used for marking: on ships, in the tunnels of the underground railway, underground passages and for the needs of the military to be used in the conditions of even very poor activated lighting. SIGNS SL/2 material luminance after the passage of time (mcd/m 2 ) 2 min. 5 min. 10 min. 30 min. 60 min. 120 min. the loss of light time (min.) Film (F) Board (P) 513,71 209,71 106,31 33,51 15,31 6, Polycarbonate (W) 525,71 229,71 116,51 35,81 16,11 7, System TD (T) 342,81 149,01 76,38 23,81 10,79 4, SIGNS SL/5 material luminance after the passage of time (mcd/m 2 ) 2 min. 5 min. 10 min. 30 min. 60 min. 120 min. the loss of light time (min.) Film (F) Board (P) 682,70 279,70 140,90 43,70 19,70 8, Polycarbonate (W) 650,71 270,71 134,91 41,61 18,71 8, System TD (T) 478,71 194,71 97,51 29,91 13,39 5, Aluminium (ALU) 951,23 394,23 195,23 58,23 26,03 11, SIGNS SL/8 luminance after the passage of time (mcd/m 2 ) the loss of light material 2 min. 5 min. 10 min. 30 min. 60 min. 120 min. time (min.) Aluminium (ALU) 1486,2 638,23 319,23 96,23 42,03 17, THE POLISH NORM: PN - 92/N /01 luminance after the passage of time (mcd/m 2 ) the loss of light 2 min. 5 min. 10 min. 30 min. 60 min. 120 min. time (min.) , THE NORM: DIN luminance after the passage of time (mcd/m 2 ) the loss of light 2 min. 5 min. 10 min. 30 min. 60 min. 120 min. time (min.) , THE NORM: ISO / FDIS luminance after the passage of time (mcd/m 2 ) class 2 min. 5 min. 10 min. 30 min. 60 min. 120 min A B C D

2 Board PCV p Board PCV SL/2 Light luminance (mcd/m²) 513,7 209,7 106,3 33,5 15,3 6, min. the time after the passage of which light luminance Material of lower ignition propensity (the measurement of a Inflammability: sample of material in aluminium, in accordance with the norm: ISO 3795) -20 C up to +70 C The kind of used glue: Acrylic glue FTM 1 Peel strength: 30 N / 25 mm (180 on stainless steel) The temperature of storage: 15 C up to 25 C, relative humidity 50% Obtained certificates, undergone tests and the received certificates of attestation: clean, dry, free of dusts and degreased. Application on materials having low surface tension such as: polypropylene or polyethylene ought to be avoided. Fitting on significantly curved surfaces having small diameters ought to be avoided. The temperature of fitting higher than +10 C. tdc SL/2 ; June 2005 Board PCV SL/5 Light luminance (mcd/m²) 682,7 279,7 140,9 43,7 19,7 8, min. the time after the passage of which light luminance The classification of inflammability: Maximum final adhesivity: Obtained certificates, undergone tests and the received certificates of attestation. This material meets the requirements of the international Code of FTP / part 5 in the scope of surface inflammability. Report: TZ / FTP-5 / 106 / This material meets the requirements of the international Code of FTP/part 2 in the scope of the toxic properties of the products of combustion. Report: TZ / FTP-2 / 124 / From -40 C up to +90 C The signs are provided with the self-adhesive points of fitting. +18 C. After 24 hours tdc SL/5

3 Film f Film SL/2 Light luminance (mcd/m²) 513,7 209,7 106,3 33,5 15,3 6, min. the time after the passage of which light luminance Material of lower ignition propensity (the measurement of Inflammability: a sample of material in aluminium, in accordance with the norm: ISO 3795) From -20 C up to +70 C The kind of used glue: Acrylic glue FTM 1 Peel strength: 30 N / 25 mm (180 on stainless steel) The temperature of storage: 15 C do 25 C, relative humidity 50%. Film SL/5 having small diameters ought to be avoided. The temperature of fitting higher than +10 C. tdc SL/2, June 2005 Light luminance (mcd/m²) 682,7 279,7 140,9 43,7 19,7 8, min. - the time after the passage of which light luminance Material of lower ignition propensity (the measurement of Inflammability: a sample of material in aluminium, in accordance with the norm: ISO 3795) From -20 C up to +70 C The kind of used glue: Acrylic glue FTM 1 Peel strength: 30 N / 25 mm (180 on stainless steel) Material of lower ignition propensity (the measurement of Inflammability: a sample of material in aluminium, in accordance with the norm: ISO 3795) having small diameters ought to be avoided. The temperature of fitting higher than +10 C. tdc SL/5

4 SYSTEM TD t SYSTEM TD SL/2 Light luminance (mcd/m²) 342,8 149,0 76,3 23,8 10,7 4, min. - the time after the passage of which light luminance From - 40 C up to + 90 C The kind of used glue: Acrylic glue for double-side application on a foundation of polyethylene foam. Off-steel shear strength: 40 N / 625 mm² (in accordance with norm EN 1943, at the temperature of 23 C +/-2 C). +18 C. tdc SL/2, June 2005 SYSTEM TD SL/5 Light luminance (mcd/m 2 ) 478,7 194,7 97,5 29,9 13,3 5, min. - the time after the passage of which light luminance From - 40 C up to + 90 C The kind of used glue: Acrylic glue for double-side application on a foundation of polyethylene foam. Off-steel shear strength: 40 N / 625 mm² (in accordance with norm EN 1943, at the temperature of 23 C +/-2 C). Off-steel peel strength: 22 N / 25 mm (in accordance with norm EN 1939, at the temperature of 23 C +/-2 C). +18 C. tdc SL/5

5 Polycarbonate SL / 2 w Polycarbonate SL/2 Light luminance (mcd/m²) 525,71 229,71 116,51 35,81 16,11 7, min the time after the passage of which light luminance Photoluminescent signs and on-the-floor sequences - Name System LLL. Type Manufacturer: Intended use: Light luminance: The kind of used glue: Off-steel shear strength: Off-steel peel strength: Maximum final adhesivity: Remarks about operation: PC - SL/2 On-the-floor signs and sequences serve for the marking, at a low level, of evacuation routes, and also dangerously protruding thresholds, the elements of constructions and parts of machines in long corridors, on stairs etc. A calibration certificate: 2500-M M23 // 2004 Central Office of Measurements in Warsaw. From -40 C up to +120 C Acrylic glue 40 N / 625 mm² 22 N / 25 mm After 24 hours +10 C. The recommended temperature of fitting between 15 C up to 20 C. On-the-floor signs and sequences, once pasted on, are unfit to be used again after peeling off. tdc SL/2 DNV 0575, June 2005

6 Polycarbonate SL / 5 w Polycarbonate SL/5 Light luminance (mcd/m²) 650,71 270,71 134,91 41,61 18,71 8, min the time after the passage of which light luminance Name Photoluminescent signs and on-the-floor sequences - System LLL Type PC - SL / 5 Manufacturer: On-the-floor signs and sequences serve for the marking, Intended use: at a low level, of evacuation routes, and also dangerously protruding thresholds, the elements of constructions and parts of machines in long corridors, on stairs etc. Light luminance: A calibration certificate: 2500-M M23 // 2004 Central Office of Measurements in Warsaw. -40 C do +120 C The kind of used glue: Acrylic glue Off-steel shear strength: 40 N / 625 mm² Off-steel peel strength: 22 N / 25 mm Remarks about operation: 10 C. The recommended temperature of fitting between 15 C and 20 C. On-the-floor signs and sequences, once pasted on, are unfit to be used again after peeling off. tdc SL/5 DNV 0575 CNBOP No.:... Year, June 2005

7 Thermoplastic material m Manufacturer: Intended use: Wykonanie: The manner The conditions Lighting parameters: Remarks about operation: Chwaszczyno Oliwska 166 A photoluminescent convex floor marker, which is intended for the permanent marking of the shoulder of an evacuation route at a low level on the premises such, as: production halls, warehouses, garages, underground passages, stairs, etc., and also on foundations of open-work structure (greting). The marker is manufactured of thermoplastic plastic. The marker is provided with a threaded mandrel, serving for fitting on open-work structures or platforms, by means of screwing with nut of a special cushion, which might be added to the marker. In case of fitting on a monolithic surface, fitting is performed with the use of plastic wall plug or with the of glues commonly applied in the building industry. Fitting ought to be performed after the previous drying of the surface and removing dust from it. The product is manufactured solely with the use of SL / 5 technology (measured in accordance with DIN ). From -40 C up to +90 C The marker is resistant to mechanical loads and shearing. The maintenance and cleaning of surfaces ought to be conducted with the use commonly used washing and cleaning agents. Caution! In the luminescent part of the marker, fighter spots might be observed these are the agglomerations of pigment, which, however, do not change the properties of the entire product, nor do they exert an adverse influence upon the parameters of it.

8 Aluminium material a ALUMINIUM SL/5 Light luminance (mcd/m²) 951,2 394,2 195,2 58,2 26,0 11, min the time after the passage of which light luminance Non-toxic. A certificate of hygienic attestation (HK / B/0025 / 01 / 2005) from the National Not found to be radioactive. An assessment: Z-II / 002 / from the Central Laboratory for Radiological Protection in Warsaw. The classification of inflammability: This material meets the requirements of the international Code of FTP/part 5 in the scope Klasyfikacja palności: of surface inflammability. Report: TZ / FTP-5 / 106 / 2004 Smoke emission properties and toxic properties: This material meets the requirements of the international Code of FTP/part 5 in the scope of the toxic properties of the products of combustion. Report: TZ / FTP-2 / 125 / 2004 From - 40 C up to +100 C tdc ALU - SL / 5, June 2005 ALUMINIUM SL/8 Light luminance (mcd/m²) 1486,2 638,2 319,2 96,2 42,0 17, min the time after the passage of which light luminance Non-toxic. A certificate of hygienic attestation (HK / B / 0025 / 01 / 2005) from the National Not found to be radioactive. An assessment (Z-II / 003 / ) from the Central Laboratory for Radiological Protection in Warsaw. The classification of inflammability: Smoke emission and toxic properties: This material meets the requirements of the international Code of FTP/part 5 in the scope of surface inflammability. Report: TZ / FTP-5 / 123 / 2004 This material meets the requirements of the international Code of FTP/part 5 in the scope of the toxic properties of the products of combustion. Report: TZ / FTP-2 / 125 / 2004 From -40 C up to +100 C tdc ALU - SL / 8