CURRICULAM VITAE. : (Office) (Residence) (Mobile)

Transcription

1 CURRICULAM VITAE NAME : SATYAJIT ROY ADDRESSES FOR COMMUNICATION : POSTAL : Dr. Satyajit Roy Professor Department of Mathematics Indian Institute of Technology Madras Chennai , India TELEFAX : E - MAIL : sjroy@iitm.ac.in TELEPHONE : (Office) (Residence) (Mobile) EDUCATIONAL QUALIFICATIONS : Degree University Subject Year Class %age of Marks B.Sc.(Hons.) Burdwan University Maths.(Hons.) 1985 First 71 (West-Bengal, India) ( Univ. Rank - 3) M.Sc. - Do - Applied Maths First 81 (Univ. Gold Medal) Ph.D, 1993, Indian Institute of Science, Bangalore, India. Thesis Title: Numerical Studies of Laminar Compressible Boundary Layer Flows with Heat and Mass Transfer. RESEARCH INTEREST : Convective Heat and Mass Transfer, Computational Fluid Dynamics. 1

2 RESEARCH PUBLICATIONS International Journals 1. Unsteady laminar compressible boundary layers with vectored mass transfer and an applied magnetic field by S. Roy and G. Nath, Int. J. Engg. Sci., Vol. 30, No.1, pp.15-24, Unsteady hypersonic boundary layers for slender axi-symmetric bodies with large injection rates by S. Roy and G. Nath, Int. J. Engg. Sci., Vol. 30, No.6, pp , Unsteady laminar compressible swirling flow with massive blowing by S. Roy and G. Nath, AIAA J., Vol.30, No. 11, pp , Non-uniform slot injection(suction) or wall enthalpy into a steady non-similar compressible laminar boundary layer flows by S. Roy and G. Nath, Acta Mechanica, Vol. 103, pp , Non-uniform slot injection (suction) into a compressible flow by S. Roy, Acta Mechanica, Vol. 139, pp , Non-uniform multiple slot injection (Suction) or wall enthalpy into a steady compressible laminar boundary layer by S. Roy, Acta Mechanica, Vol. 143, pp , Unsteady MHD forced flow due to a point sink by A. T. Eswara, S. Roy and G. Nath, Acta Mechanica, Vol. 145, pp , Non-uniform mass transfer or wall enthalpy into a compressible boundary layer flow over yawed cylinder by S. Roy, Int. J. Heat and Mass Transfer, Vol.44, No.16, pp , Unsteady two-dimensional and axi-symmetric MHD boundary layer flows by M. Sathyakrishna, S. Roy and G. Nath, Acta Mechanica, Vol.150, pp.67-77,

3 10. An inverse problem for the Helmholtz equation involving two semi-infinite fluids by A. Chakrabarti, P. Daripa and S. Roy, Inverse Problems in Engng., Vol.10, pp , Steady non-similar axi-symmetric water boundary layers with variable viscosity and Prandtl number by P. Saikrishnan and S. Roy, Acta Mechanica, Vol.157, pp , Compressible boundary layer flow with non-uniform slot injection (or suction)over i) a Cylinder and ii) a Sphere by S. Roy and H. S. Takhar, Heat and Mass Transfer, Vol. 39, pp , Unsteady free convection flow over an infinite vertical porous plate due to the combined effects of thermal and mass diffusion, magnetic field and Hall currents by H.S. Takhar, S. Roy and G. Nath, Heat and Mass Transfer,Vol.39, pp , Non-uniform slot injection (Suction) into water boundary layers over i) a cylinder and ii) a sphere, P.Saikrishnan and S. Roy, International Journal of Engineering Science, Vol.41, pp , Non-uniform slot injection (suction) into steady laminar water boundary layer flow over a rotating sphere by S. Roy and P. Saikrishnan, International Journal of Heat and Mass transfer, Vol.46, pp , Self-similar solution of the unsteady mixed convection flow in the stagnation point region of a rotating sphere, D. Anilkumar and S. Roy, Heat and Mass Transfer, Vol.40, pp , Unsteady MHD flow onarotatingcone inarotating fluid by S. Roy, H.S. Takhar and G. Nath, MECCANICA, Vol.39, pp , Unsteady mixed convection from a rotating cone in a rotating fluid due to the combined effects of thermal and mass diffusion, S. Roy and D. Anilkumar, International Journal of Heat and Mass Transfer, Vol.47, pp ,

4 19. Unsteady mixed convection flow on a rotating cone in a rotating fluid, D. Anilkumar and S. Roy, Applied Mathematics and Computation, Vol. 155, pp , Steady laminar water boundary layer flow over a yawed cylinder by S. Roy and P. Saikrishnan, International Journal of Applied Mechanics and Engineering, Vol.9, No.4, pp , Non-uniform slot injection (suction) into water boundary layer flow past yawed cylinder by S. Roy and P. Saikrishnan, International Journal of Engineering Science, Vol.42, pp , Finite element analysis of natural convection flows in a square cavity with nonuniformly heated wall(s), S. Roy and Tanmay Basak, International Journal of Engineering Science, vol.43,pp (2005) 23. Unsteady mixed convection from a moving vertical slender cylinder, S. Roy and D. Anilkumar ( Trans. ASME: Journal of Heat Transfer, vol.128,pp ,2006). 24. Natural convection in a square cavity filled with a porous medium: Effects of various thermal boundary conditions by Tanmay Basak, S. Roy, T. Paul and I.Pop (International Journal of Heat and Mass Transfer, vol.49, pp , 2006) 25. Effect of Non-uniform slot injection (Suction) on a forced flow over a slender cylinder by P. Datta, D.Anilkumar, S. Roy and N.C.Mahanti (International Journal of Heat and Mass Transfer, vol.49, pp , 2006) 26. Effects of thermal boundary conditions on natural convection flows within a square cavity, by Tanmay Basak, S. Roy, A.R. Balakrishnan(International Journal of Heat and Mass Transfer, Vol. 49, , 2006) 2007: 27. Non-similar solution of an unsteady mixed convection flow over a vertical cone with suction or injection by S. Roy, P. Datta and N.C. Mahanti (International Journal of Heat and Mass transfer, vol. 50, pp , 2007) 4

5 28. Effects of nonuniformly heated wall(s) on a natural-convection flow in a square cavity filled with a porous medium by Tanmay Basak, S. Roy and H.S. Takhar (Numerical Heat transfer Part A-Applications, Vol. 51, pp , 2007) 29. Effect of various thermal boundary conditions on natural convection in a trapezoidal cavity with linearly heated side wall(s) by E. Natarajan, S. Roy and Tanmay Basak (Numerical Heat transfer Part B-Fundamentals, Vol. 52, pp , 2007) 30. Steady natural convection flows in a square cavity with linearly heated side wall(s) by M. Sathiyamoorthy, Tanmay Basak, S. Roy and I. Pop (International Journal of Heat and Mass transfer, Vol. 50, pp , 2007) 31. Unsteady mixed convction over a vertical cone due to impulsive motion by P.J. Singh and S. Roy (International Journal of Heat and Mass transfer, Vol 50, pp , 2007) 32. Steady natural convection flows in a square cavity filled with a porous medium for linearly heated side wall(s) by M. Sathiyamoorthy, Tanmay Basak, S. Roy and I. Pop (International Journal of Heat and Mass transfer, Vol 50, pp , 2007) 33. Finite element analysis of natural convection in a triangular enclosure : Effects of various thermal boundary conditions by Tanmay Basak, S. Roy and Ch. Tirumalesha (Chemical Engineering Science, Vol 62, pp , 2007) 34. Non-uniform double slot injection(suction) on a forced flow over a slender cylinder by S. Roy, Prabal Datta, R. Ravindran and E.Momoniat (International Journal of Heat and Mass transfer, Vol. 50, pp , 2007) 35. Effect of temperature difference aspect ratio on natural convection in a square cavity for non-uniform thermal boundary conditions by M. Sathiyamoorthy, Tanmay Basak, S. Roy and N.C. Mahanti (ASME Trans. Journal of Heat Transfer, Vol. 129, pp , 2007) 2008: 5

6 36. Finite element simulations of natural convection in a right-angle triangular enclosure filled with a porous medium: Effects of various thermal boundary conditions by Tanmay Basak, S. Roy and C. Thirumalesha (Journal of Porous Media, Vol. 11, pp , 2008) 37. Multiple slot suction/injection into an exponentially decreasing free stream flow by S. Roy and P. Saikrishnan (International Communications in Heat and Mass Transfer, Vol. 35, pp , 2008) 38. Natural convection flows in a trapezoidal enclosure with uniform and non-uniform heating of bottom wall by E. Natarajan, Tanmay Basak and S. Roy (International Journal of Heat and Mass transfer, Vol. 51, pp , 2008) 39. Mixed convection along a rotating vertical slender cylinder in an axial flow, International Journal of Heat and Mass transfer by P.J. Singh and S. Roy (International Journal of Heat and Mass transfer, Vol. 51, pp , 2008) 40. Finite element simulation on natural convection flow in a triangular enclosure due to uniform and nonuniform bottom heating by S. Roy with Tanmay Basak, C. Thirumalesha and C. M. Krishna (ASME Trans. Journal of Heat Transfer, Vol. 130, Article Number , 2008) 41. Unsteady mixed convection from a rotating vertical slender cylinder in an axial flow by P.J. Singh, S. Roy and I. Pop (International Journal of Heat and Mass transfer, Vol. 51, pp , March 2008) 42. Finite element simulations of natural convection flow in an isosceles triangular enclosure filled with a porous medium: Effects of various thermal boundary conditions by Tanmay Basak, S. Roy, S.K. Babu and I. Pop (International Journal of Heat and Mass transfer, Vol. 51, pp , 2008) 43. Role of Bejan s heatlines in heat flow visualization and optimal thermal mixing for differentially heated square enclosures by Tanmay Basak and S. Roy(International Journal of Heat and Mass transfer, Vol. 51, pp , 2008) 6

7 44. Natural convection and flow simulation in differentially heated isosceles triangular enclosures filled with porous medium by Tanmay Basak, S. Roy and S.K. Babu (Chemical Engineering Science, Vol. 63, pp , 2008) 45. Finite element analysis of natural convection flow in a isosceles triangular enclosure due to uniform and non-uniform heating at the side walls by Tanmay Basak, S. Roy, S.K. Babu and A. R. Balakrishnan (International Journal of Heat and Mass transfer, Vol. 51, pp , 2008) 46. Analysis of steady convective heating for molten materials processing within trapezoidal enclosures by Tanmay Basak, S. Roy, E. Natarajan (Industrial & Engineering Chemistry Research, Vol. 47, pp , 2008) 2009: 47. Effects of injection (suction) on a steady mixed convection boundary layer flow over a vertical cone by R. Ravindran, S. Roy and E. Momoniat (International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 19, pp , 2009) 48. Double diffusive mixed convection flow over a moving vertical plate in the presence of internal heat generation and a chemical reaction by P.M. Patil, S. Roy and A.J. Chamkha (Turkish Journal of Engineering and Environmental Sciences, Vol. 33, pp , 2009) 49. Bejan s heatlines and numerical visualization of heat flow and thermal mixing in various differentially heated porous square cavities by R. S. Kaluri, Tanmay Basak, S. Roy(Numerical Heat Transfer, Part A: Applications, Vol. 55, pp , 2009) 50. Finite element simulation of natural convection flow in a trapezoidal enclosure filled with porous medium due to uniform and non-uniform heating by Tanmay Basak, S. Roy, A. Singh and I. Pop (International Journal of Heat and Mass transfer, Vol. 52, pp , 2009) 51. Unsteady mixed convection flow over a vertical wedge by P.J. Singh, S. Roy and R. Ravindran (International Journal of Heat and Mass transfer, Vol. 52, pp , 2009) 7

8 52. Non-uniform double slot suction (injection) into water boundary layer flows over a cylinder by P. Saikrishnan, S. Roy, I.M.R. Sadiq and B. D. Pandey (International Journal of Heat and Mass transfer, Vol. 52, pp , January 2009) 53. Analysis of mixed convection flows within a square cavity with linearly heated side wall(s) by Tanmay Basak, S. Roy, P.K. Sharma and I. Pop (International Journal of Heat and Mass transfer, Vol. 52, pp , 2009) 54. Analysis of heat recovery and thermal transport within entrapped fluid based on heatline approach by Tanmay Basak, S. Roy and G. Aravind (Chemical Engineering Science, Vol. 64, pp , 2009) 55. Analysis of mixed convection flows within a square cavity with uniform and nonuniform heating of bottom wall by Tanmay Basak, S. Roy, P.K. Sharma and I. Pop (International Journal of Thermal Sciences, Vol. 48, pp , 2009) 56. Visualization of heat flow due to natural convection within triangular cavities using Bejan s heatline concept by Tanmay Basak, G. Aravind and S. Roy (International Journal of Heat and Mass transfer, Vol. 52, pp , 2009) 57. Heat flow analysis for natural convection within trapezoidal enclosures based on heatline concept by Tanmay Basak, S. Roy and I. Pop (International Journal of Heat and Mass transfer, Vol. 52, pp , 2009) 58. Role of non-uniform slot injection (suction) model on the separation of a laminar boundary layer flow by S. Roy, P. Saikrishnan and R. Ravindran (Mathematical and Computer Modelling, Vol. 50, pp , 2009) 59. Influence of double slot suction (injection) into water boundary layer flows over sphere by S. Roy, P. Saikrishnan and B. D. Pandey (International Journal of Heat and Mass transfer, Vol. 36, pp , 2009) 60. Natural convection flows in porous trapezoidal enclosures with various inclination angles by Tanmay Basak, S. Roy, Amit Singh and A. R. Balakrishnan (International Journal of Heat and Mass transfer, Vol. 52, pp , 2009) 8

9 61. Natural convection flow simulation for various angles in a trapezoidal enclosure with linearly heated side wall(s) by Tanmay Basak, S. Roy, A. Singh and B. D. Pandey (International Journal of Heat and Mass transfer, Vol. 52, pp , 2009) 62. Finite element simulation of natural convection within porous trapezoidal enclosures for various inclination angles: Effect of various wall heating by Tanmay Basak, S. Roy, S.K. Singh and I. Pop (International Journal of Heat and Mass transfer, Vol. 52, pp , 2009) 2010: 63. Role of thermally stratified medium on a free convection flow from a rotating sphere by R. Saikrishnan, S. Roy, H.S. Takhar and R. Ravindran (International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 20, pp , 2010) 64. Mixed convection flow over a vertical power-law stretching sheet by P.M. Patil, S. Roy and A.J. Chamka (International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 20, pp , 2010) 65. Visualization of heat transport during natural convection within porous triangular cavities via heatline approach by Tanmay Basak, S. Roy, D. Ramakrishna and I. Pop (Numerical Heat transfer Part A-Applications, Vol. 57, pp , 2010) 66. The influence of slot injection/suction on the spreading of a thin film under gravity and surface tension by E. Momoniat and R. Ravindran, S. Roy (Acta Mechanica, Vol. 211, pp , 2010) 67. Visualization of heat transport due to natural convection for hot materials confined within two entrapped porous triangular cavities via heatline concept by Tanmay Basak, S. Roy, D. Ramakrishna and I. Pop (International Journal of Heat and Mass transfer, Vol. 53, pp , 2010) 68. Analysis of mixed convection in a lid-driven porous square cavity with linearly heated side wall(s) by Tanmay Basak, S. Roy, S. K. Singh and I. Pop (International Journal of Heat and Mass transfer, Vol. 53, pp , 2010) 9

10 69. Heatline approach for visualization of heat flow and efficient thermal mixing with discrete heat sources by R. S. Kaluri, Tanmay Basak and S. Roy (International Journal of Heat and Mass transfer, Vol. 53, pp , 2010) 70. Analysis of heat recovery and heat transfer within entrapped porous triangular cavities via heatline approach by Tanmay Basak, S. Roy, D. Ramakrishna and B. D. Pandey(International Journal of Heat and Mass transfer, Vol. 53, pp , 2010) 71. Heatline analysis of heat recovery and thermal transport in materials confined within triangular cavities by Tanmay Basak, G. Aravind, S. Roy and A. R. Balakrishnan (International Journal of Heat and Mass transfer, Vol. 53, pp , 2010) 72. Unsteady mixed convection flow from a moving vertical plate in a parallel free stream: Influence of heat generation or absorption by P. M. Patil and S. Roy (International Journal of Heat and Mass transfer, Vol. 53, pp , 2010) 73. Unsteady mixed convection flow over a vertical stretching sheet in a parallel free stream with variable wall temperature by P. M. Patil, S. Roy and I. Pop (International Journal of Heat and Mass transfer, Vol. 53, pp , 2010) 74. Analysis of heatlines for natural convection within porous trapezoidal enclosures: Effect of uniform and non-uniform heating of bottom wall by Tanmay Basak, S. Roy, A. Matta and I. Pop (International Journal of Heat and Mass transfer, Vol. 53, pp , 2010) 2011: 75. Mixed convection flow over a vertical power-law stretching sheet by P.M. Patil, S. Roy and A.J. Chamkha (International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 21, pp , 2011) 76. Finite element based heatline approach to study mixed convection in a porous square cavity with various wall thermal boundary conditions by Tanmay Basak, P.V.K. Pradeep, S. Roy and I. Pop (International Journal of Heat and Mass transfer, Vol. 54, pp , 2011) 10

11 77. A complete heatline analysis on visualization of heat flow and thermal mixing during mixed convection in a square cavity with various wall heating by Tanmay Basak, P.V.K. Pradeep and S. Roy (Industrial & Engineering Chemistry Research, Vol. 50, pp , 2011) 78. A comprehensive heatline based approach for natural convection flows in trapezoidal enclosures: Effect of various walls heating by Tanmay Basak, D. Ramakrishna, S. Roy, A. Matta and I. Pop (International Journal of Thermal Sciences, Vol. 50, pp , 2011) 79. Non-Darcy buoyancy flow in a square cavity filled with porous medium for various temperature difference aspect ratios by M. Sathiyamoorthy, Tanmay Basak and S. Roy (Journal of Porous Media, Vol. 14, pp , 2011) 80. Unsteady mixed convection flow from a moving vertical plate in a parallel free stream: Influence of heat generation or absorption by P. M. Patil, S. Roy (International Journal of Heat and Mass Transfer, Vol. 53, pp , 2011) 81. Unsteady mixed convection flow from a moving vertical slender cylinder in the presence of viscous dissipation by P.M. Patil, S. Roy, A.J. Chamkha, P.S. Kulkarni (International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena, Vol. 2, pp , 2011) 2012: 82. Entropy generation vs energy flow due to natural convection in a trapezoidal cavity with isothermal and non-isothermal hot bottom wall by Tanmay Basak, R. Anandalakshmi, P. Kumar, S. Roy (Energy, Vol. 37, pp , 2012) 83. Analysis of entropy generation minimization during natural convection in trapezoidal enclosures of various angles with linearly heated side wall(s) by Tanmay Basak, P. Kumar, R. Anandalakshmi, S. Roy (Industrial & Engineering Chemistry Research, Vol. 51, pp , 2012) 84. Analysis of entropy generation due to natural convection in tilted square cavities by A.K. Singh, S. Roy and Tanmay Basak (Indstrial & Engineering Chemistry Research, Vol. 51, pp , 2012) 11

12 85. Numerical study of mixed convection within porous square cavities using Bejan s heatlines: Effects of thermal aspect ratio and thermal boundary conditions by D. Ramakrishna, Tanmay Basak, S. Roy and I. Pop (International Journal of Heat and Mass Transfer, Vol. 55, pp , 2012) 86. A complete heatline analysis on mixed convection within a square cavity: Effects of thermal boundary conditions via thermal aspect ratio by D. Ramakrishna, Tanmay Basak, S. Roy and I. Pop (International Journal of Thermal Sciences, Vol. 57, pp , 2012) 87. A Peclet number based analysis of mixed convection for lid-driven porous square cavities with various heating of bottom wall by Tanmay Basak, S. Roy and A.J. Chamkha (International Communications in Heat and Mass Transfer, Vol. 39, pp , 2012) 88. Analysis of Bejan s heatlines on visualization of heat flow and thermal mixing in tilted square cavities by A.K. Singh, S. Roy and Tanmay Basak (International Journal of Heat and Mass Transfer, Vol. 55, pp , 2012) 89. Unsteady heat and mass transfer over a vertical stretching sheet in a parallel free stream with variable wall temperature and concentration by P.M. Patil, I. Pop and S. Roy (Numerical Methods for Partial differential Equations, Vol. 28, pp , 2012) 90. Unsteady effects on mixed convection boundary layer flow from a permeable slender cylinder due to non-linearly power law stretching by P.M. Patil, S. Roy and I. Pop (Computers & Fluids, Vol. 56, pp , 2012) 91. Effects of chemical reaction on mixed convection flow of a polar fluid through a porous medium in the presence of internal heat generation by P.M. Patil, A.J. Chamkha and S. Roy (Meccanica, Vol. 47, pp , 2012) 92. Mixed convection flow over a vertical power-law stretching sheet by P.M. Patil, S. Roy and A.J. Chamkha (International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 22, pp , 2012) 12

13 93. Flow and heat transfer over a moving vertical plate in a parallel free Sstream: Role of internal heat generation or absorption by P.M. Patil, S. Roy and I. Pop (Chemical Engineering Communications, Vol. 199, pp , 2012) 94. Visualization of heat transport during natural convection in a tilted square cavity: Effect of isothermal and nonisothermal heating by A.K. Singh, S. Roy and Tanmay Basak (Numerical Heat Transfer Part A-Applications, Vol. 61, pp , 2012) 2013: 95. Heatlines for visualization of heat transport for natural convection within porous trapezoidal enclosures with various wall heating by D. Ramakrishna, Tanmay Basak and S. Roy (Numerical Heat Transfer Part A-Applications, Vol. 63, pp , 2013) 96. Chemical reaction effects on unsteady mixed convection boundary layer flow past a permeable slender vertical cylinder due to a nonlinearly stretching velocity by P.M. Patil, S. Roy and I. Pop (Chemical Engineering Communications, Vol. 200, pp , 2013) 97. Analysis of heatlines during natural convection within porous square enclosures: Effects of thermal aspect ratio and thermal boundary conditions by D Ramakrishna, T Basak, S. Roy, I Pop (International Journal of Heat and Mass Transfer, Vol. 59, pp , 2013) 98. Unsteady thermal radiation mixed convection flow from a moving vertical plate in a parallel free stream: Effect of Newtonian heating by P.M. Patil, D. Anilkumar, S. Roy (International Journal of Heat and Mass Transfer, Vol. 62, pp , 2013) Conference Proceedings 99. Two-dimensional numerical simulation of boundary layers by S. Roy, Proceeding of National Conference on Mathematical Applications in Social and Industrial sectors, Narosa Publishing House, p p ,

14 100. Non-similar solution of an unsteady mixed convection flow on a moving slender cylinder by D. Anilkumar and S. Roy ( Accepted in Third MIT conference on Computational and solid Mechanics, June, 2005) 101. Natural convection inside a square cavity heated from below and symmetrically cooled at both sides: Effects of various Dirichlet boundary conditions at the bottom wall, S. Roy and Tanmay Basak, (Accepted in ASME :2005 summer Heat Transfer Conference at San Francisco U.S.A, July 17-22, 2005 ) R & D PROJECTS AS PRINCIPAL INVESTIGATOR: 1. Title : Multiple slot injection ( suction ) in boundary layer flows Duration : Six months, January to June, Fund : Rupees. 1.0 Lakh Funding Agency : IC & SR, I.I.T., Madras 2. Title : Inverse problems in boundary layer flows Duration : Three years, August, 1999 to July 2002 Fund : Rupees 3.95 Lakhs Funding Agency : University Grants Commission, New Delhi, India TEACHING EXPERIENCES after Ph. D. Degree: 1. One year as Lecturer, Department of Mathematics, M. S. Ramaiah Institute of Technology, Bangalore , India. 2. Four years as Assistant Professor, Department of Mathematics, Birla Institute of Technology (Deemed University) Ranchi , India. 3. Five years as Assistant Professor, Department of Mathematics, Indian Institute of Technology-Madras, Chennai , India. 4. Two years as Associate Professor, Department of Mathematics, Indian Institute of Technology-Madras, Chennai , India. 5. Professor(Since April 2006), Department of Mathematics, Indian Institute of Technology- Madras, Chennai , India. 14

15 EXPERIENCE OF GUIDING STUDENTS: 1. Ph.D. Thesis Guidance (i) P. Sai Krishna (ii) D. Anil Kumar (iii) Prabal Dutta (iv) Paramjeet Singh (v) E. Natarajan Presently Guiding (i) D. Ramakrishna (ii) Abhishek Kumar Singh (iii) Monisha Roy ABROAD VISIT : Visited abroad under DAAD fellowship to the University of Kaiserslautern, Germany for one month (August-September, 1999) Visited to San Francisco, U.S.A. during 15 July to 23 July, 2005 for presenting paper in ASME 2005 Summer Heat Transfer Conference. Visited as visiting professor to the Computation and Applied Mathematics Centre, University of the Witwatersrand, Johannesburg during June 1 to June 30, Visited as visiting professor including teaching assignment to the Computation and Applied Mathematics Centre, University of the Witwatersrand, Johannesburg during June 16 to August 15, Visited as visiting professor including teaching assignment to the Department of Mathematics, The Ohio State University, Main Campus 15

16 NATIONAL/ INTERNATIONAL CONFERENCES ORGANIZED SI.No Name of the Conferences Date(s) positions 1 One Day Symposium on Mathematical Dec 22, 1999 Treasurer Methods and Applications 2 One Day Symposium on Mathematical Dec 22, 2000 Treasurer Methods and Applications 3 Modelling and Simulation of Fluid June 23-24, 2000 Co-ordinator Flow Problems in Industry (Jointly) 4 International Conference on Industrial August 12-14,2001 Treasurer Mathematics 5 Workshop on Applied Mathematics in Shipping Industry and Marine Technology June 21-23, 2002 Treasurer 6 National Symposium on Mathematical Methods and Applications Dec 21, 2002 Secretary Delivered invited talks and participated in more than 50 national and international conferences in universities within India during last 20 years. 16

17 Impact factor of the international journals in which research papers are contributed by S. Roy Journal Name Impact factor (SCI data 2011) Acta Mech Appl. Math. Comput Chem. Eng. Commun Chem. Eng. Sci Comput. Fluids Ind. Eng. Chem. Res Int. J. Appl. Mech. Eng. Int. Commun. Heat Mass Transfer Heat Mass Trans Int. J. Eng. Sci Int. J. Heat Mass Transfer Int. J. Numer. Methods Heat Fluid Flow Int. J. Therm. Sci Inverse Problems in Engng J. Porous Media Math. Comput. Model Meccanica Numer. Heat Transfer, Part A Numer. Heat Transfer, Part B Numer. Meth. Part. D. E