This course is designed to train persons who are responsible for First Line Maintenance and Faulting (FLMF) on the centralised components of the Alsto

Transcription

1 Alstom Atlas 200 Control centre FLMF This course is designed to train persons who are responsible for First Line Maintenance and Faulting (FLMF) on the centralised components of the Alsto Personal Protective Equipment Automatic Train Protection GWML FLMF Maintaining ATP. Great Western Axle Counter AzLM FLMF Covers maintenance, faulting, repair of AzLM axle counters. Axle Counter AzSM(E) FLMF Covers maintenance, faulting, repair of AzSM(E) axle counters.

2 Axle Counter FLMF Covers maintenance, faulting, and repair of axle counters. Axle Counter Frauscher FLMF Covers maintenance, faulting, repair of Frauscher axle counters. Axle Counters AzLM SLMF Covers the requirements for second line technical support for the AzLM system. Basic Signalling Appreciation Provides an understanding and appreciation of basic signalling principles, how they are implemented and to introduce signalling equipment.

3 Block Systems Absolute Block FLMF Covers maintenance, faulting and repair of Absolute block systems. Block Systems No Signalman Key Token FLMF Maintaining the no Signaller Key Token. Cable Jointing Maintaining signalling cables and jointing. Cables and Power Supplies FLMF Maintenance of Signalling power supplies and Signalling cables.

4 Calibrate & analyse Intelligent Infrastructure Systems Develops knowledge and skills of maintenance, faulting, repairing and testing procedures on Intelligent Infrastructure (II) Systems. Chilterns ATP FLMF Covers Chilterns ATP first line maintenance and faulting duties. Control System IECC FLMF Maintaining the IECC control system. Control System TDM Westronic 1024 FLMF First line maintenance and faulting on the TDM Westronic 1024 system.

5 Ebi Gate 2000 Personal Protective Equipment - Ebi Gate 630 Personal Protective Equipment - EbiGate200 MSL Overlay FLMF Personal Protective Equipment - Electrical Signals (Inc AWS) FLMF Covers the maintenance, faulting repairing and testing procedures that apply to electrical signals and ancillary equipment.

6 Electro-Static Sensitive Devices (ESSD) Covers the requirements for carrying out work on Electrostatic Sensitive Devices. Failure and Incident Testing (Level 1) To develop the delegates understanding of procedures for dealing with wrong side failures in signalling systems. Failure and Incident Testing (Level 2) To develop the delegates understanding of investigating reported signalling failures and classifying the fault. Fault Finding & Diagram Techniques Covers the procedures for locating faults in relay based signalling systems.

7 Foundation Control Systems Practical experience on modern signalling control systems. G110 Author, Checker, Approver Train persons who are responsible for the roles of Author, Checker or Approver in relation to Non-Conceptual Works and Emergency Testing. G110 Tester / Lead Tester Designed to train persons who are responsible for undertaking Non-Conceptual Works and Emergency Testing (G110 Testing). GETS Relay Interlocking Serial Interface [RISI] Maintaining the GETS RISI system.

8 Hot Axle Box Detector GE FUS FLMF Undertake maintenance duties for Hot Axle Box Detector Systems.GE FUS. Hot Axle Box Detector Phoenix MB FLMF To understand maintenance techniques that need to be applied to hot axle box detector systems. Install Intelligent Infrastructure Logger Systems To enable staff to correctly & safely install Intelligent Infrastructure Logger Systems. Interlocking ERTMS FLMF To make delegates aware of the roles and responsibilities associated with the operation of ERTMS Interlocking and associated Signal Control Centre equipment and to show the necessary underpinning knowledge to do this safely on the Railway Infrastructure in line with current industry standards.

9 Interlocking Route Relay FLMF To develop the delegates understanding of corrective and preventative maintenance of relay based interlocking. Interlocking Scottish Region Geographical FLMF To develop the delegates understanding of the corrective maintenance and faulting procedures for Interlocking Scottish Region Geographical FLMF Systems Interlocking Solid State FLMF To develop understanding of corrective and preventative maintenance of Solid State Interlocking. Interlocking WR Route Relay FLMF To develop the delegates understanding of corrective maintenance of Western Region E 10,000 free wired, relay based interlocking.

10 Introduction to Relay Interlocking To develop the delegates understanding of corrective and preventative maintenance of 850 Spec Free Wire Interlocking. K Style AzLM Briefing A briefing for training deliverers on the AzLM Zp30K system Lineside Telephone FLMF elearning course The course covers the maintenance and first line faulting activities required for level crossing central battery phones, PETS and KETS... Elearning MCB-OD FLMF Provides knowledge and skills of corrective and preventative maintenance of MCB-OD 1st line Switches and Crossings.

11 MCB-OD Level Crossings SLMF To develop the delegates understanding of maintenance, faulting repairing, set up and configuration of the MCB-OD system. Mechanical Interlocking FLMF To develop the delegates understanding of maintenance, faulting repairing and testing procedures that apply to Mechanical Interlockings. Mechanical Signalling Installation To develop the delegates understanding of installation & adjustment procedures that apply to mechanical signal engineering equipment. Mechanical Signalling Maintenance To develop the delegates understanding of maintenance, faulting repairing or testing procedures that apply to mechanical signal engineering equipment.

12 Points Torsional Back Drive To develop the delegates understanding of maintenance, faulting repairing and testing procedures that apply to Torsional Back Drives - Personal Protective Equipment Power Operated Gate Opener (POGO) This module is designed to train persons who are responsible for undertaking FLFM of POGO as part of their duties on Network Rail Infrastructure. It is designed to develop a person s knowledge, understanding and skills and is therefore particularly suited to persons required to prove their competence in these areas. Production of Non-Conceptual Signalling Design Designed to train persons who are responsible for Producing Non-Conceptual Signalling Design in their daily work and to develop knowledge, understanding and skills as defined in parts of competence standards listed below and is therefore particularly suited to persons required to prove their competence in these areas. Schweizer VaMoS MSL Overlay FLMF This course is designed to train persons who are responsible for installing and commissioning, preventative and corrective maintenance, and fault finding of VaMoS systems.

13 Schwihag Point Rollers elearning elearning course accessed through the elearning Platform Elearning Siemens ACM 100 Axle Counters FLMF The course is designed to train delegates in the maintenance of the equipment. At the end of the course delegates will be able to carry out maintenance First line faulting and maintenance to the relevant SMS and SMTH documentation. Siemens S21 Eurobalise FLMF This course is designed to train persons who are responsible for undertaking installation, maintenance and testing of the Siemens S21 Eurobalise as part of their duties on Network Rail Infrastructure. It is designed to develop a persons knowledge, understanding and skills and is therefore particularly suited to persons required to prove their capability in these areas. Signal Engineering Induction To provide delegates with basic underpinning knowledge of the signalling systems components and working methods associated with maintenance of signalling assets. On successful completion of the course assessments, a Statement of Achievement will be issued to the delegate if applicable. Mentoring Arrangements: Following completion of the training each delegate shall undertake a period of mentored workplace experience to enable the learning to be consolidated through practical workplace experience.

14 Signal Engineering Installation 1 To develop the delegates understanding of assembling signalling systems, sub system component parts and installing and terminating wires and cables. Signal Engineering Maintenance 1 Core Signal Engineering training for entry level staff (1st of 2 courses). Signal Engineering Maintenance 2 Core Signal Engineering training for entry level staff (2nd of 2 courses). Signal Maintenance Testing Core Personnel who are responsible for the maintenance, faulting repairing or testing of the Signal Engineering Equipment.

15 Signal Works Testing Module 2 Provides the underpinning knowledge and practical experience of the requirements and processes needed to perform Signalling Works Testing Mod 2 Principles testing. Signal Works Testing Module 3A Develops understanding of the requirements and processes needed to perform Signalling Works Verification Testing. Signal Works Testing Module 3BI Provides training on carrying out Signal Works Testing, Functional Tester (Interlockings) Mod 3BI duties for the testing of interlocking type circuits in equipment rooms. Signal Works Testing Module 3BL Develops understanding of the requirements and processes needed to perform Signalling Works Functional Testing.

16 Signal Works Testing Module 3C Develops understanding of the requirements and processes needed to perform Signalling Works Verification Testing Mod C. Signal Works Testing Module 3D Provides training on how to carrying out Signal Works Testing, Verification Tester duties for testing cables in the working railway environment. Signal Works Testing Module 4T Develops understanding of the requirements and processes needed to perform Signalling Works Testing Mod 4T testing including the inspection of these trackside equipments. Smartlock 400 Operation & Maintenance To build delegates' skills & knowledge associated with the Smartlock 400 system and to enable them to carry out first line maintenance & faulting activities on the equipment on the railway infrastructure using appropriate techniques in a range of circumstances.

17 SMTH Release of Controls To develop delegates understanding of the responsibilities and procedures for dealing with SMTH Release Of Controls in signalling systems. TASS FLMF To develop the delegates understanding of maintenance, faulting repairing and maintenance testing procedures that apply to TASS equipment. TPWS FLMF To develop the delegates understanding of maintenance, faulting repairing or testing procedures that apply to TPWS equipment. Track Circuit DC FLMF To develop delegates understanding of the maintenance, faulting, repairing and / or testing of DC Track Circuits.

18 Track Circuit EBI Track 200 [TI21] (Digital RX & Single Rail) Provides upskilling from Track circuit TI21 FLMF to EBI TRACK 200. Track Circuit EBI Track 200 [TI21] Double Rail Covers maintenance, faulting, repair and testing of EBI Track 200 [TI21] track circuit equipment configured in Double Rail mode only. Track Circuit EBI Track 200 [TI21] Single Rail Covers maintenance, faulting, repair and testing of EBI Track 200 [TI21] track circuit equipment configured in Single Rail mode. Track Circuit EBI Track 400 Conversion Conversion course from EBI track 200 to EBI track 400

19 Track Circuit FS 2600 FLMF Covers maintenance, faulting, repair and testing of FS 2600 Track Circuits. Track Circuit HVI FLMF To provide delegates with basic underpinning knowledge to enable them to carry out the maintenance, faulting, repairing and / or testing of Track Circuit HVI. Track Circuits Reed FLMF To develop the delegates understanding of maintenance, faulting repairing or testing procedures that apply to Reed Track Circuits. Track Circuits VT1SP To develop the delegates understanding of maintenance, faulting repairing or testing procedures that apply to VT1(SP) Track Circuits. Prerequisite Qualifications - Mandatory Prerequisite -

20 Westlock Trackside First line Faulting & Maintenance (FLFM) training for trackside elements of the WTS. 5 days theory and practical sessions. Westrace Trackside To provide the delegate with the skills and knowledge to work on Westrace Mk2 equipment commonly known as Westrace Trackside or Westrace Objective Controller Personal Protective Equipment - Working on Operational Signalling Equipment Covers the maintenance, faulting repairing and testing of the signal engineering equipment. Download Date: 15/3/2019