GMK preliminary product guide

Size: px
Start display at page:

Download "GMK preliminary product guide"

Transcription

1 GMK features 165 USt (130 t) capacity ft ( m) 6-section full power boom ft (11-18 m) bifold lattice swingaway, hydraulic luffing or manual offset 12 ft (3.6 m) 3-sheave heavy duty jib, hydraulic luffing integrated in swingaway 88,400 lb ( kg) counterweight with hydraulic removal system 510 hp (380 kw) Mercedes OM 502 LA 8 cylinder turbo-charged diesel engine. Daimler Chrysler, 16 speed G transmission Patented TWIN-LOCK boom pinning system Independent hydro-pneumatic MEGATRAK suspension All wheel steering preliminary product guide contents Features 2 Specifications 3 Dimensions 5 Counterweight Dimensions Travel Proposal 6 7 Working Range Main Boom 8 Main Boom Charts 9 Load Charts 10 Working Range Manual Offset Swingaway 11 Working Range Hydraulic Offset Swingaway 12 Hydraulic Offset Swingaway Charts 13 Manual Offset Swingaway Charts 14 All Terrain Crane

2 features 2 Mercedes-Benz OM 502 LA 510 bhp ( rpm 1770 ft./lb. torque ( rpm TWIN-LOCK Boom pinning mechanism automatically pins the sections in position using two horizontal large diameter boom pins. The proven U -shaped MEGAFORM TM design provides a natural cradling position for boom sections which eliminates stiffeners, reducing weight and increasing capacity. Large wear pads provide superior boom alignment when telescoping and allows an excellent transition of weights between sections. Daimler Chrysler 16 speed G LUFFING BI-FOLD SWINGAWAY Hydraulically offset lattice bi-fold swingaway lets the operator set the offset from 0-40 while under load, from the superstructure cab; 12 ft (3.6 m) 3-sheave heavy duty jib, hydraulic luffing integrated in swingaway. GMK MEGATRAK Independent suspension and all wheel steer system allows wheels to remain on the ground at all times so stresses and weight are not continually transferred between axles.

3 specifications Superstructure BBoom 42 ft ft. (12.9 m - 60 m) six section, full power boom with patented TWIN-LOCK boom pinning system. Maximum tip height: 207 ft. (63 m). BBoom Nose Eight nylatron sheaves, mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Quick reeve boom nose. Removable auxiliary boom nose with removable pin type rope guard. Boom Elevation Single lift cylinder with safety valve provides boom angle from -3 to +83. Hydraulically Offsettable Lattice Extension 36 ft. 59 ft. (11 m - 18 m) bifold lattice swingaway extension hydraulically offsettable and luffing under load: Controlled from the crane cab. Maximum tip height: 266 ft. (81 m) *Offsettable Lattice Extension 36 ft ft. (11 m - 18 m) bifold lattice swingaway extension manually offset: 0, 20 or 40. Maximum tip height: 266 ft. (81 m) Lattice Extension Inserts One 26 ft. (8 m) and one 20 ft. (6 m) insert for use with lattice swingaway extension. Increases extension length to 85 ft. (26 m) or 105 ft. (32 m). Load Moment & Anti-Two Block System Load moment and anti-two block system with audio/visual warning and control lever lockout provides electronic display of boom angle, length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending two-block condition. CCab All aluminum construction cab with acoustical lining, tinted safety glass, adjustable operator s seat with suspension, opening windows in side and cab rear, hinged front window with wiper, sunvisor and window shade. Other features include hot water heater, armrest integrated crane controls, and ergonomically ard instrumentation. Crane Control System Full electronic control of all crane movements using electrical control levers with automatic reset to zero. Controls are integrated with the LMI and engine management system by CAN-BUS. ECOS system with graphic display. Swing Two planetary gears with axial piston motors. Infinitely variable to 1.7 rpm. Holding and service brake. Counterweight 88,400 lbs. ( kg) consisting of various sections with hydraulic installation/removal system. Controlled from the superstructure cab. EEngine Mercedes-Benz OM 904 LA diesel, 4 cylinders, water cooled, turbocharged with 174 bhp ( rpm. Max torque: 498 ft/lb. (675 Nm) at 100 rpm. Engine emission: EUROMOT/EPA/CARB (non road). Hydraulic System 2 separate circuits, 1 axial piston variable displacement pump (load sensing) with electronic power limiting control and 1 gear pump for swing. Dual thermostatically controlled oil coolers keep oil at optimum operating temperature. Tank capacity: 221 gal. (840 l) Hoist Main and auxiliary hoists are powered by axial piston motor with planetary gear and brake. Thumb-thumper hoist drum rotation indicator alerts operator of hoist movement. Main Auxiliary Line length: 837 ft. 591 ft. (255 m) (180 m) Rope diameter: 19 mm 19 mm Line speed: 394 ft./min. 394 ft./min. (120 m/min) (120 m/min) Line pull: 15,700 lbs. 15,700 lbs. (70 kn) (70 kn) EElectrical System 24V system with three phase alternator, 28V/80A. 2 batteries, 12V/170 Ah. *Optional Equipment *11.8 ft (3.6 m) side-stowed 3-sheave heavy-duty jib integrated in swingaway. *Work light, mounted on top of base section. *Cab controlled work lights mounted to top of base section. *Stainless steel exhaust system with spark arrestor in lieu of standard. *Engine independent diesel cab heater, also serves as engine preheater including 24-hour timer. *Engine independent propane gas cab heater. *Stereo/radio CD player. *Outrigger pad load indicator with readout both in superstructure cab and carrier. *Air conditioning. *Working limiter. *Boom mounted aircraft warning light. *Drive and steer control for superstructure. *EKS5 with full graphic display. *Denotes optional equipment 3 GMK5165-2

4 specifications GMK Carrier FChassis Box type, torsion resistant frame is fabricated from high strength steel. OOutrigger System Four hydraulic single stage outrigger beams with vertical cylinders and outrigger pads, 23.6 (600 mm) square. Outriggers can be set in 3 positions: Full ' (7.5 m) Partial ' (6.7 m) (5.9 m) (5.1m) Retracted - 8.2' (2.5 m) Independent horizontal and vertical movement controlled from each side of carrier. Electronic crane level indicators. Engine Mercedes-Benz OM 502 LA eight cylinder, water cooled, turbocharged, with 510 bhp ( rpm. torque 1,770 ft./lb. ( rpm. Engine emissions: EUROMOT/EPA/CARB (off road) Compression and exhaust brakes. Fuel Tank Capacity 106 gallons (400 L). Transmission Daimler Chrysler, 16 speed G Drive/Steer 10X6X10 Axles 1st axle line steer 2nd axle line steer (additional drive) 3rd axle line drive/steer (disconnects for highway travel 10x8x10 drive only) 4th axle line drive/steer (connects for all wheel steer) 5th axle line drive/steer Drive axles with planetary hub reduction and center mounted differential-gearing. Inter-axle and cross axle differential locks. Suspension Exclusive MEGATRAK suspension. Independent hydropneumatic system acting on all wheels with hydraulic lockout. Suspension can be raised 6.5 (170 mm) or lowered 5 (130 mm) both longitudinally and transversely. Features an automatic leveling system for highway travel. Tires 10 tires, 16.00R25 Steering Dual circuit, hydraulic power assisted steering system. Transfer case mounted, ground driven emergency steering pump. Axles 1, 2, 3 and 5 steer on highway. Separate steering of the 4th and 5th axles for all wheel and crab steering, controlled by an electronic rocker switch. Brakes Service brakes: pneumatic dual circuit acting on all wheels, anti lock prevention. Parking brake: pneumatically operated spring loaded brake acting on axle lines 2 and 5. Air dryer. CCab Two-man construction with the following features: safety glass, driver and passenger seats with suspension, heated rear view mirrors, engine independent diesel cab heater, AC, complete instrumentation and driving controls. EElectrical System 24V system with three phase alternator, 28V/100A 2 batteries, 12V/170 Ah Maximum Speed 53 mph (85 kph) Gradeability (Theoretical) 72% tires 64% /20.5 tires Miscellaneous Standard Equipment Work light; tool kit; fire extinguisher; auxiliary boom nose; radio/cd player in carrier cab, heated rear view mirrors, and cruise control. Optional Equipment *Stainless steel exhaust system with spark arrestor *20.5R25 tires (vehicle width 10.2 ft., 3.1 m) *10X8X10 drive/steer *Electric driveline retarder *Worklights for outriggers *Steel outrigger floats *Spare tire with carry bracket *Outrigger pad load indicator *Hinged bunk bed *Denotes optional equipment

5 dimensions 49.2' [14998] 42.3' [12900] 14.3' [4360] 5 6.1' [1871] 8.9' [2731] 4.2' [1291] 4.1' [1250] 5.4' [1650] 6.6' [2000] ' [1650] 4.1' [1250] 1.4' [441] 40.2' [12262] R R R25 A 12.9 (3945) 13.1 (3995) 13.1 (3995) Ra = Radius all wheels steered *Lowered A 5.1 i n.* (130m m ) 12.5 (3815) 12.7 (3865) 12.7 (3865) B 9.0 (2750) 9.8 (3000) 9.8 (3000) C 7.7 (2338) 8.2 (2486) 8.2 (2507) D 5.7 (1750) 5.9 (1800) 5.9 (1800) E 1.4 (435) 1.6 (485) 1.6 (485) F 1.2 (356) 1.3 (386) 1.3 (386) 18 o 23 o 1 17 o 20 o 25 o 19 o 20 o 25 o 19 o GMK5165-2

6 counterweight (1300) 10 & (1752) 4.4 (1325) 9 (2730) 1. 5,500 lb.(2 500 kg.) Baseplate 2. 11,000 lb.(5 000 kg.) Stacking lb.(3 750 kg.) Stacking 4. 8,300 lb.(3 750 kg.) Stacking 5. 5,500 lb.(2 500 kg.) Stacking 6. 11,000 lb.(5 000 kg.) Stacking (2730) 7. 5,500 lb.(2 500 kg.) Pinned 8. 5,500 lb.(2 500 kg.) Pinned 9. 2,200 lb.(1 000 kg.) Bolted (Auxiliary Hoist or IPO) ,700 lb.(5 770 kg.) Wing ,700 lb.(5 770 kg.) Wing GMK Counterweight Configuration lb.(kg.) 2,200 (1 000) 7,700 (3 500) 13,200 (6 000) 18,700 (8 500) 24,200 (11 000) 29,700 (13 500) 35,200 (16 000) 40,700 (18 500) 46,200 (21 000) 51,800 (23 500) 57,300 (26 000) 62,800 (28 500) 88,400 (40 100)

7 weight proposals Trailing Boom 7 Dolly Rear 3 Axles Front 2 Axles 30,897 lb. 50,263 lb. 39,128 lb. (14,015 kg) (22,799 kg) (17,749 kg) Unit Configuration: boom Outrigger pads stowed on unit 10 X 8 X 10 drive/steer Main and auxiliary hoists with cable ft. hydraulic luffing swingaway Additional oil cooler 20.5 tires 2 axle boom dolly (5,710 lb. / 2590 kg) Boom Over Front Basic Weights - lbs (kg) Mercedes power, 16.00R25 tires, 10x6x10 drive/steer, 2nd oil Axles 1 & 2 Axles 3-5 Total cooler, outrigger pads, auxiliary hoist, driver and tanks filled 43,004 (19,506) 66,561 (30,192) 109,565 (49,698) Additions: 10x8x10 drive/steer 596 (270) 187 (85) 783 (355) Electric driveline retarder -187 (-85) 760 (345) 573 (260) Spare wheel R25 XGC steel rim with stowage -474 (-215) 1,045 (474) 571 (259) Spare wheel R25 XGC steel rim with stowage -592 (-268) 1,295 (587) 703 (319) Spare wheel 20.5 R25 XGC steel rim with stowage -680 (-309) 1,478 (671) 798 (362) Brackets for hydraulic swingaway 161 (73) 17 (8) 179 (81) Hose reel + parts for hydraulic swingaway 674 (306) -211 (-96) 463 (210) 36 ft ft. (11-18m) hydraulic swingaway 3,549 (1,610) -242 (-110) 3,307 (1,500) Auxiliary boom nose 334 (152) -180 (-82) 154 (70) 5,500 lb. (2500 kg) section 8 pinned to superstructure -4,414 (-2,002) 9,926 (4,502) 5,512 (2,500) 5,500 lb. (2500 kg) section 1 stowed on carrier 3,922 (1,770) 1,302 (591) 5,225 (2,370) Substitutions: 14.00R25 tires -504 (-228) -819 (-372) -1,323 (-600) 20.5R25 tires 361 (164) 587 (266) 948 (430) Removals: Boom assembly -25,491 (-11,563) -8,058 (-3,655) -33,550 (-15,218) Front outriggers -3,095 (-1,404) -13 (-6) -3,109 (-1,410) Rear outriggers 2,250 (1,021) -5,557 (-2,521) -3,307 (-1,500) Front and rear outrigger floats -69 (-32) -371 (-168) -441 (-200) GMK5165-2

8 working 8 42'-197' main boom Height from the ground in feet Operat ing radius in fe et fro m axis of rota tio n R [ft] GMK THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

9 load charts ft. ( m) 88,400 lb. (40,100 kg) 100% 24'7" Spread 360 o Pounds (thousands) Feet 42' 58' 73' 89' 104' 119' 135' 150' 166' 181' 197' 8 * *Over rear ft. ( m) 46,200 lb. (21,000 kg) 100% 24'7" Spread 360 o Pounds (thousands) Feet 42' 58' 73' 89' 104' 119' 135' 150' 166' 181' 197' THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. GMK5165-2

10 load charts ft. ( m) 2,200 lb. (1000 kg) 100% 24'7" Spread 360 o Pounds (thousands) Feet 42' 58' 73' 89' 104' 119' 135' 150' 166' 181' 197' GMK THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

11 working swingaway 42'-197' main boom Height from the ground in feet Boom and extension length in feet Operating radius in feet from axis of rotation R [ft] Hook heights shown in the working diagram do not consider loaded boom deflection. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. GMK5165-2

12 working swingaway 42'-197' main boom Height from the ground in feet Boom and extension length in feet GMK Operating radius in feet from axis of rotation Hook heights shown in the working diagram do not consider loaded boom deflection. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. R [ft]

13 load charts hydraulic offsettable swingaway 197 ft. (60.0 m) ft. ( m) 88,400 lbs. (40,100 kg) 100% 24'7" Spread Pounds (thousands) 36 FT 59 FT 85 FT 105 FT Feet ft. (60.0 m) ft. ( m) 46,200 lbs. (21,000 kg) 100% 24'7" Spread Pounds (thousands) 36 FT 59 FT 85 FT 105 FT Feet THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. GMK5165-2

14 load charts manual offsettable swingaway ft. (60.0 m) ft. ( m) 88,400 lbs. (40,100 kg) 100% 24'7" Spread Pounds (thousands) 36 FT 59 FT 85 FT 105 FT Feet GMK ft. (60.0 m) ft. ( m) 46,200 lbs. (21,000 kg) 100% 24'7" Spread Pounds (thousands) 36 FT 59 FT 85 FT 105 FT Feet THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

15 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 28.5 t) counterweight I m/s en GMK

16 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 28.5 t) counterweight I m/s GMK en 2-517

17 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 28.5 t) counterweight I m/s 12 m/s en GMK

18 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 28.5 t) counterweight I m/s GMK en 2-519

19 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 28.5 t) counterweight I m/s 10 m/s en GMK

20 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 26 t) counterweight I m/s en GMK

21 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 26 t) counterweight I m/s GMK en 2-529

22 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 26 t) counterweight I m/s 12 m/s en GMK

23 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 26 t) counterweight I m/s GMK en 2-531

24 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 26 t) counterweight I m/s 10 m/s en GMK

25 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 23.5 t) counterweight I m/s en GMK

26 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 23.5 t) counterweight I m/s GMK en 2-541

27 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 23.5 t) counterweight I m/s 12 m/s en GMK

28 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 23.5 t) counterweight I m/s GMK en 2-543

29 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 23.5 t) counterweight I m/s 10 m/s en GMK

30 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 21 t) counterweight I m/s en GMK

31 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 21 t) counterweight I m/s GMK en 2-553

32 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 21 t) counterweight I m/s 12 m/s en GMK

33 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 21 t) counterweight I m/s GMK en 2-555

34 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 21 t) counterweight I m/s 10 m/s en GMK

35 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 18.5 t) counterweight I m/s en GMK

36 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 18.5 t) counterweight I m/s GMK en 2-565

37 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 18.5 t) counterweight I m/s 12 m/s en GMK

38 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 18.5 t) counterweight I m/s GMK en 2-567

39 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 18.5 t) counterweight I m/s 10 m/s en GMK

40 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 16 t) counterweight I m/s en GMK

41 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 16 t) counterweight I m/s GMK en 2-577

42 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 16 t) counterweight I m/s 12 m/s en GMK

43 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 16 t) counterweight I m/s GMK en 2-579

44 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 16 t) counterweight I m/s 10 m/s en GMK

45 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 13.5 t) counterweight I m/s en GMK

46 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 13.5 t) counterweight I m/s GMK en 2-589

47 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 13.5 t) counterweight I m/s 12 m/s en GMK

48 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 13.5 t) counterweight I m/s GMK en 2-591

49 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 13.5 t) counterweight I m/s 10 m/s en GMK

50 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 11 t) counterweight I m/s en GMK

51 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 11 t) counterweight I m/s GMK en 2-601

52 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 11 t) counterweight I m/s 12 m/s en GMK

53 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 11 t) counterweight I m/s GMK en 2-603

54 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 11 t) counterweight I m/s 10 m/s en GMK

55 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 8.5 t) counterweight I m/s en GMK

56 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 8.5 t) counterweight I m/s GMK en 2-613

57 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 8.5 t) counterweight I m/s 12 m/s en GMK

58 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 8.5 t) counterweight I m/s GMK en 2-615

59 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 8.5 t) counterweight I m/s 10 m/s en GMK

60 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 6 t) counterweight I m/s en GMK

61 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 6 t) counterweight I m/s GMK en 2-625

62 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 6 t) counterweight I m/s 12 m/s en GMK

63 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 6 t) counterweight I m/s GMK en 2-627

64 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 3.5 t) counterweight I m/s en GMK

65 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 3.5 t) counterweight I m/s GMK en 2-633

66 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 3.5 t) counterweight I m/s 12 m/s en GMK

67 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 3.5 t) counterweight I m/s GMK en 2-635

68 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 1 t) counterweight I m/s en GMK

69 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 1 t) counterweight I m/s GMK en 2-641

70 Main boom Lifting capacity charts acc. to 85% ( lbs / ft ) Crane with lbs ( 1 t) counterweight I m/s 12 m/s en GMK

71 Lifting capacity charts acc. to 85% ( lbs / ft ) Main boom Crane with lbs ( 1 t) counterweight I m/s GMK en 2-643

72 notes 15 GMK5165-2

73 Regional Headquarters Americas Manitowoc, Wisconsin, USA Tel: Fax: Shady Grove, Pennsylvania, USA Tel: Fax: Europe, Middle East, Africa Ecully, France Tel: Fax: Asia Pacific Shanghai, China Tel: Fax: Singapore Tel: Fax: Regional Offices Americas Brazil Alphaville Tel: Fax: Mexico Monterrey Tel: Fax: Europe, Middle East, Africa Algeria Hydra Tel: Fax: Czech Republic Netvorice Tel: Fax: France Baudemont Tel: Fax: Cergy Tel: Fax: Decines Tel: Fax: Germany Langenfeld Tel: Fax: Hungary Budapest Tel: Fax: Italy Parabiago Tel: Fax: Netherlands Breda Tel: Fax: Poland Warsaw Tel: Fax: Portugal Alfena Tel: Fax: Lisbon Tel: Fax: Russia Moscow Tel: Fax: U.A.E. Dubai Tel: Fax: U. K. Middlesex Tel: Fax: Sunderland Tel: Fax: Asia Pacific Australia Melbourne Tel: Fax: Sydney Tel: Fax: China Beijing Tel: Fax: Xi an Tel: Fax: Korea Seoul Tel: Fax: Philippines Makati City Tel: Fax: Factories Brazil Alphaville China Zhangjiagang France Charlieu La Clayette Moulins Germany Wilhelmshaven India Calcutta Pune Italy Niella Tanaro Portugal Baltar Fânzeres Slovakia Saris U.S.A. Manitowoc Port Washington Shady Grove Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment MANITOWOC Printed in USA Form No. GMK Part No / 0208 / 1M

A 954 C HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 954 C HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 95 C HD litronic` Machine for Industrial Applications Operating Weight 165,800 170,0 lb Engine Output 36 hp (0 kw) Technical Data Engine Rating per ISO 99 0

More information

Exp All technology at operator s service. Suggested Orange peel. Straight boom m. Industrial straight stick 8.00 m RV 600 2,

Exp All technology at operator s service. Suggested Orange peel. Straight boom m. Industrial straight stick 8.00 m RV 600 2, Exp 5055 Exp 5055 All technology at operator s service 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20 19 18 17 16 15 14 13 12 11 10 8 9 7 6

More information

ATF 90G-4. Operating, Service and Maintenance Manual. Vehicle identification no: WFN4 RUL R

ATF 90G-4. Operating, Service and Maintenance Manual. Vehicle identification no: WFN4 RUL R Operating, Service and Maintenance Manual ATF 90G-4 Vehicle identification no: WFN4 RUL R5 72045 Manufacturer FAUN GmbH Postfach 10 01 08 D - 91205 Lauf a. d. Pegnitz Tel: (09123) 185-0 Fax: (09123) 7

More information

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating weight 63,0 65,0 t Engine output 210 kw (286 HP)

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating weight 63,0 65,0 t Engine output 210 kw (286 HP) Technical Description Hydraulic Ecavator A 95 B HD litronic` Machine for Industrial Applications Operating weight 63, 65, t Engine output 1 kw (86 HP) The Better Machine. Engine Rating per ISO 99 1 kw

More information

Wheeled Excavator. Operating Weight: 18,700-21,500 kg Engine Output: 105 kw / 143 PS Bucket Capacity: m³

Wheeled Excavator. Operating Weight: 18,700-21,500 kg Engine Output: 105 kw / 143 PS Bucket Capacity: m³ Wheeled Excavator A 94 C Operating Weight: 18,7-21, kg Engine Output: 1 kw / 143 PS Bucket Capacity:. - 1.1 m³ A 94 C Operating Weight: 18,7-21, kg Engine Output: 1 kw / 143 HP Bucket Capacity:. - 1.1

More information

DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL

DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great

More information

Wheeled Excavator. Engine Output (SAE J1349): Engine Output (ISO 9249): 173 HP/129 kw 175 HP/129 kw

Wheeled Excavator. Engine Output (SAE J1349): Engine Output (ISO 9249): 173 HP/129 kw 175 HP/129 kw Wheeled Excavator A 924 Operating Weight: Engine Output (SAE J1349): Engine Output (ISO 9249): Bucket Capacity:,9 8,4 lb 173 HP/129 kw 17 HP/129 kw.98 2.16 yd³ A 924 Operating Weight:,9 8,4 lb Engine Output

More information

Wheeled Excavator A 924

Wheeled Excavator A 924 Wheeled Excavator A 924 Operating Weight: Engine Output (SAE J1349): Engine Output (ISO 9249): Bucket Capacity:,9 8,4 lb 173 HP/129 kw 17 HP/129 kw.98 2.16 yd³ A 924 Operating Weight:,9 8,4 lb Engine Output

More information

Wheeled Excavator A 924. Operating Weight: 21,400 26,500 kg Engine Output: 129 kw / 175 HP Bucket Capacity: m³

Wheeled Excavator A 924. Operating Weight: 21,400 26,500 kg Engine Output: 129 kw / 175 HP Bucket Capacity: m³ Wheeled Excavator A 924 Operating Weight: 21,4 26,5 kg Engine Output: 129 kw / 175 HP Bucket Capacity:.55 1.65 m³ A 924 Operating Weight: 21,4 26,5 kg Engine Output: 129 kw / 175 HP Bucket Capacity:.55

More information

214'-7" Hook Height L1 114'-10" 22,025# Version "A" (With TSK 212 Section) HOOK HEIGHT ft/m TOWER TYPE TS TSK 212

214'-7 Hook Height L1 114'-10 22,025# Version A (With TSK 212 Section) HOOK HEIGHT ft/m TOWER TYPE TS TSK 212 PEINER SK 415 Hammerhead Tower Crane 22,025 44,050 lbs. (10 20 t) Lifting Capacity* SPECIFICATIONS C-L of hook to end of Jib 4'-10" (2) PART 33'-2" 7'-7" (4) PART BG 73'-2" TSK 214'-7" Height L1 114'-10"

More information

Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors

Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors DATA SPECIFICATION SHEET MEYER RP SERIES (ROAD PRO) Specifications RP-10 10 feet long by 36 inches tall, weight approximately 1600 lbs. Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks

More information

260A Tractor, Loader & Backhoe S/n & up

260A Tractor, Loader & Backhoe S/n & up International Harvester Service Manual 260A Tractor, Loader & Backhoe S/n 200501 & up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL HARVESTER OR IT

More information

s s t L e 46 APACHE TRACK SYSTEM ALUMINUM FRAME LINK LARGER FOOTPRINT 14.4 CM INTERMEDIATE WHEELS OVERSIZE 25.4 CM CORNER WHEELS

s s t L e 46 APACHE TRACK SYSTEM ALUMINUM FRAME LINK LARGER FOOTPRINT 14.4 CM INTERMEDIATE WHEELS OVERSIZE 25.4 CM CORNER WHEELS APACHE TRACK SYSTEM S ALUMINUM FRAME LINK LARGER FOOTPRINT 14.4 CM INTERMEDIATE WHEELS EASY-STEER NEW PATENT PENDING POINT OF ROTATION COMPRESSION MOLDED PLASTIC DRIVE SPROCKET OVERSIZE 25.4 CM CORNER

More information

DRIFTER PLOW-IN-A-BOX

DRIFTER PLOW-IN-A-BOX DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great

More information

Clausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Clausing Industrial, Inc. Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm

More information

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make

More information

We reserve the right to make changes in the course of technical development MAN Nutzfahrzeuge Aktiengesellschaft

We reserve the right to make changes in the course of technical development MAN Nutzfahrzeuge Aktiengesellschaft Calculations GB We reserve the right to make changes in the course of technical development. 2000 MAN Nutzfahrzeuge Aktiengesellschaft Reprinting, reproduction or translation, even of excerpts, is not

More information

Answers to Exercises C mm mm mm mm cm mm mm mm

Answers to Exercises C mm mm mm mm cm mm mm mm Answers to Exercises CHAPTER 1 Exercises 1.1 (p. 19) 1. 0.4 cm 6. 4.8 kn, 0.743 mm 2. 10.5 cm, 12.3 cm 7. 200 GN/m2 3. (Descriptive) 8. 38.4 kn 4. 1.65 mm 9. 12.15 cm; 1.2 kn/cm 5. 48.25 N, 11.97 cm 10.

More information

Moments practice exam questions

Moments practice exam questions Moments practice exam questions Name - 50 minutes 48 marks Page 1 of 13 Q1. A waiter holds a tray horizontally in one hand between fingers and thumb as shown in the diagram. P, Q and W are the three forces

More information

Prescription Total. Frame Width. Seating Setup. q 16 q 15 q 14 q 17 q 16 q 15 q 14 Short q 18 q 17 q 16 q 15 q 14 q 19 q 18 q 17 q 16 q 15 q 14

Prescription Total. Frame Width. Seating Setup. q 16 q 15 q 14 q 17 q 16 q 15 q 14 Short q 18 q 17 q 16 q 15 q 14 q 19 q 18 q 17 q 16 q 15 q 14 Effective 15/05/2018 Company: Account Number: Date: q Quote q PO Number: RTS: Marked For: Focus CR 2309 300 lb weight capacity. Tilt range: -5º anterior to 50º posterior. Frame Width Address: 19C Ballinderry

More information

Work Sheet. Adverse Condition Factors Module 9

Work Sheet. Adverse Condition Factors Module 9 Work Sheet Adverse Condition Factors Module 9 Parent Answer Guide Lesson 1 Limited-visibility Conditions and Extreme Weather Topic 1 - Night Time Driving 1. List three things that are affected by night

More information

Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm

More information

AF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001

AF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001 AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK

More information

SHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT

SHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT SHARK Snow Plow 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow system in the industry.

More information

product manual H-3220A Benkelman Beam

product manual H-3220A Benkelman Beam 05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel

More information

ton. Electric Reach Forklift Trucks SPECIFICATIONS

ton. Electric Reach Forklift Trucks SPECIFICATIONS Electric Reach lift Trucks.0 -.0ton ECIFICATIONS Meets following major industrial standards and code: ISO Reach forklift truck, stability & tests ISO/DIS Travel & loading interlock ISO 0 Overhead guard

More information

When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero.

When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero. 0 0 0 0 k M j M i M M k R j R i R F R z y x z y x Forces and moments acting on a rigid body could be

More information

When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero.

When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero. 0 0 0 0 k M j M i M M k R j R i R F R z y x z y x Forces and moments acting on a rigid body could be

More information

INSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500

INSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500 WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer

More information

Name Date Period PROBLEM SET: ROTATIONAL DYNAMICS

Name Date Period PROBLEM SET: ROTATIONAL DYNAMICS Accelerated Physics Rotational Dynamics Problem Set Page 1 of 5 Name Date Period PROBLEM SET: ROTATIONAL DYNAMICS Directions: Show all work on a separate piece of paper. Box your final answer. Don t forget

More information

Tutorial 1 - Drive fundamentals and DC motor characteristics

Tutorial 1 - Drive fundamentals and DC motor characteristics University of New South Wales School of Electrical Engineering & elecommunications ELEC4613 ELECRIC DRIVE SYSEMS utorial 1 - Drive fundamentals and DC motor characteristics 1. In the hoist drive system

More information

ASSEMBLY / OWNER S MANUAL

ASSEMBLY / OWNER S MANUAL ATV PLOW MOUNT For Yamaha ATVs ASSEMBLY / OWNER S MANUAL Part No: 15-5590 MAN0050 Rev. 01 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.

More information

ATV WP2 FRONT MOUNT PUSH TUBE

ATV WP2 FRONT MOUNT PUSH TUBE ATV WP2 FRONT MOUNT PUSH TUBE ASSEMBLY / OWNER S MANUAL Part No: 16-0000 MAN0352 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle

More information

POWER PUSHER Snowplow

POWER PUSHER Snowplow May 15, 2013 Lit. No. 43682, Rev. 00 POWER PUSHER Snowplow 8' 72040; 10' 72045; Box Plow for Skid-Steer Loaders Owner's Manual and Installation Instructions Original Instructions CAUTION Read this manual

More information

PUSH TUBE STANDARD DUTY

PUSH TUBE STANDARD DUTY PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country

More information

Mil-Stak PT/2016 PARTS MANUAL

Mil-Stak PT/2016 PARTS MANUAL Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving

More information

FOREMAN ASSEMBLY / OWNER S MANUAL

FOREMAN ASSEMBLY / OWNER S MANUAL ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.

More information

A.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual

A.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual 70 8TH AVE W PO BOX 7 SPENCER, IA 0 PHONE: 7-6-9 FAX: 7-6-08 SERVICE: 800-8- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER 0-00 BLACK MODEL

More information

Statics Chapter II Fall 2018 Exercises Corresponding to Sections 2.1, 2.2, and 2.3

Statics Chapter II Fall 2018 Exercises Corresponding to Sections 2.1, 2.2, and 2.3 Statics Chapter II Fall 2018 Exercises Corresponding to Sections 2.1, 2.2, and 2.3 2 3 Determine the magnitude of the resultant force FR = F1 + F2 and its direction, measured counterclockwise from the

More information

Drive-train Basics. Team 1640 Clem McKown - mentor October 2009 (r3)

Drive-train Basics. Team 1640 Clem McKown - mentor October 2009 (r3) Drive-train Basics Team 1640 Clem McKown - mentor October 2009 (r3) Topics What s a Drive-train? Basics Components Propulsion Drivetrain Model Center of Mass Considerations Automobile versus robot tank

More information

Cat. Multi-Processors. Hydraulic Excavators. Multi-Processor/Hydraulic Excavator Compatibility. Features: Maximum Productivity.

Cat. Multi-Processors. Hydraulic Excavators. Multi-Processor/Hydraulic Excavator Compatibility. Features: Maximum Productivity. Cat Multi-Processors Hydraulic Excavators Maximum Productivity Big challenges are reduced to small pieces, thanks to high cutting and crushing forces generated by the cross-mounted cylinder. High productivity

More information

SPARE PARTS LIST CHAIN SAWS CS35S, & ,

SPARE PARTS LIST CHAIN SAWS CS35S, & , SPARE PARTS LIST CHAIN SAWS CS35S, 967624714 & 967624715,2016-08 Revision Note item Position description Revision 1 combine 14"easy start CS 35S & CS 35S FA 2 Page O change the article no. from 586998601

More information

The University of Melbourne Engineering Mechanics

The University of Melbourne Engineering Mechanics The University of Melbourne 436-291 Engineering Mechanics Tutorial Eleven Instantaneous Centre and General Motion Part A (Introductory) 1. (Problem 5/93 from Meriam and Kraige - Dynamics) For the instant

More information

TABLE OF CONTENTS. Parts Manual NR. Section 1 - Mounting Group. Section 2 - Outrigger - Stabilizer Group

TABLE OF CONTENTS. Parts Manual NR. Section 1 - Mounting Group. Section 2 - Outrigger - Stabilizer Group Parts Manual - 7600008-018 NR Section 1 - Mounting Group 6000252-TAB (C) OPERATOR PLATFORM INST.PDF 6000283-004 (A) UNDERRIDE PROTECTION INST.PDF 6000540-001 (C) PEDESTAL INSTALLATION MOD 3000.PDF 6000540-002

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400 INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37851 Application: HONDA 400 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have

More information

Front flange FLV. Max. [knm/stroke]

Front flange FLV. Max. [knm/stroke] SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,

More information

Engineering Mechanics. Friction in Action

Engineering Mechanics. Friction in Action Engineering Mechanics Friction in Action What is friction? Friction is a retarding force that opposes motion. Friction types: Static friction Kinetic friction Fluid friction Sources of dry friction Dry

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37852 Application: HONDA MODELS: 450S AND 450ES Your safety, and the safety of others, is very important. To help you make informed decisions about

More information

Tile Pro Drainage Plow Instruction Manual Wayne s Inc.

Tile Pro Drainage Plow Instruction Manual Wayne s Inc. Tile Pro Drainage Plow Instruction Manual Wayne s Inc. TILE PRO WITH UPPER HYDRAULIC LINKAGE NORMAL USAGE Notice: Do not operate the upper cylinders when the 4 ½ x 36 lift cylinders are in the lift or

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300 INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37850 Application: HONDA 300 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have

More information

A.R.M. 52 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER Owner s Manual

A.R.M. 52 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER Owner s Manual 70 38TH AVE W PO BOX 57 SPENCER, IA 530 PHONE: 7-6-49 FAX: 7-6-048 SERVICE: 800-84- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. 5 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER

More information

Frame Width. Seating Setup. q 16 q 15 q 14 q 17 q 16 q 15 q 14 Short q 18 q 17 q 16 q 15 q 14 q 19 q 18 q 17 q 16 q 15 q 14

Frame Width. Seating Setup. q 16 q 15 q 14 q 17 q 16 q 15 q 14 Short q 18 q 17 q 16 q 15 q 14 q 19 q 18 q 17 q 16 q 15 q 14 Australian Importer: Paragon Mobility Phone 1300 652 382 Email orders@paragonmobility.com.au www.paragonmobility.com.au Company: Account Number: Date: q Quote q PO Number: RTS: Marked For: Focus CR E1161

More information

HAWK TECHNOLOGY LTD.

HAWK TECHNOLOGY LTD. Stard Trunnion Line HAWK TECHNOLOGY LTD. Going Beyond Everyday Hawk Technology Ltd has evolved with today's manufacturing requirements by planning, designing, building installing state-of -the-art robotic

More information

THE LOSMANDY G-11 MOUNT

THE LOSMANDY G-11 MOUNT Checking the parts THE LOSMANDY G-11 MOUNT Depending on which accessories you ordered, your G-11 mount was shipped in four or more boxes. The contents of each box are as follows: Equatorial Mount Adjustable

More information

Objectives. Power in Translational Systems 298 CHAPTER 6 POWER

Objectives. Power in Translational Systems 298 CHAPTER 6 POWER Objectives Explain the relationship between power and work. Explain the relationship between power, force, and speed for an object in translational motion. Calculate a device s efficiency in terms of the

More information

Announcements. Equilibrium of a Rigid Body

Announcements. Equilibrium of a Rigid Body Announcements Equilibrium of a Rigid Body Today s Objectives Identify support reactions Draw a free body diagram Class Activities Applications Support reactions Free body diagrams Examples Engr221 Chapter

More information

PhysicsAndMathsTutor.com 1

PhysicsAndMathsTutor.com 1 PhysicsAndMathsTutor.com 1 Q1. A grinding wheel is used to sharpen chisels in a school workshop. A chisel is forced against the edge of the grinding wheel so that the tangential force on the wheel is a

More information

Instructions for Parts Books

Instructions for Parts Books Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:

More information

Eng Sample Test 4

Eng Sample Test 4 1. An adjustable tow bar connecting the tractor unit H with the landing gear J of a large aircraft is shown in the figure. Adjusting the height of the hook F at the end of the tow bar is accomplished by

More information

ER2 Short-head Electric Chain Hoist

ER2 Short-head Electric Chain Hoist O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in

More information

50 Gordon Drive, Rockland, Maine HC Series Snowplows. Installation Instructions CAUTION

50 Gordon Drive, Rockland, Maine HC Series Snowplows. Installation Instructions CAUTION Fisher Engineering 79000, 79200 (CH), 79250, 79350 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com May 15, 2018 Lit. No. 77138, Rev. 00 HC Series Snowplows Installation Instructions Read

More information

WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.

WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death. INSTALLATION INSTRUCTIONS ATV Front Plow Mount Kit Part Number: 80031 Applications: 2007+ Honda Rancher 420 2007+ Honda Rancher ES 420 2009+ Honda Rancher AT 420 *Not compatible with 2.5ci or A2000 winches

More information

Visit any one of our 30 locations or visit us on line at

Visit any one of our 30 locations or visit us on line at TYPE IA ALUMINUM 2886509079 2886501870 2886510013 2886510010 2886510014 2886504441 AS3002 2' TYPE IA AS3003 3' TYPE IA AS3004 4' TYPE IA AS3006 6' TYPE IA AS3008 8' TYPE IA AS3010 10' TYPE IA 34.99 57.99

More information

FOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL

FOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all

More information

PULVI-MULCHER/SEEDBED MAKER INDEX. Pulvi-Mulcher. M Models & 10 4

PULVI-MULCHER/SEEDBED MAKER INDEX. Pulvi-Mulcher. M Models & 10 4 32 M s - 7 4 & 10 4 s Effective as of 1-18 MS-881 Shown with Standard Equipment The M Series of s are the smallest units in the line-up. These units fit a niche market of seedbed preparation for the smaller

More information

Compendium Screw Jacks

Compendium Screw Jacks Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories

More information

Dynamic (Vibrational) and Static Structural Analysis of Ladder Frame

Dynamic (Vibrational) and Static Structural Analysis of Ladder Frame Dynamic (Vibrational) and Static Structural Analysis of Ladder Frame Ketan Gajanan Nalawade 1, Ashish Sabu 2, Baskar P 3 School of Mechanical and building science, VIT University, Vellore-632014, Tamil

More information

Vehicle Information. Inspection Details. Inspection Date : Inspection ID : Inspector :

Vehicle Information. Inspection Details. Inspection Date : Inspection ID : Inspector : Vehicle Information Year : 2014 Brand : Model : Series : Body Type : Drive Type : Engine : Transmission : Mileage : Color : Trim Color : Trim Type : Subaru Outback 2.5i Wagon AWD 4 Continuously Variable

More information

OWNER S MANUAL. Daniels Wing Plow. Operating Instructions Illustrated Parts List

OWNER S MANUAL. Daniels Wing Plow. Operating Instructions Illustrated Parts List OWNER S MANUAL Daniels Wing Plow Operating Instructions Illustrated Parts List 1 Congratulations! By purchasing this Daniels Wing Plow, you can now benefit by owning the latest in state-of-the-art snow

More information

Lecture Note 8-1 Hydraulic Systems. System Analysis Spring

Lecture Note 8-1 Hydraulic Systems. System Analysis Spring Lecture Note 8-1 Hydraulic Systems 1 Vehicle Model - Brake Model Brake Model Font Wheel Brake Pedal Vacuum Booster Master Cylinder Proportionnig Valve Vacuum Booster Rear Wheel Master Cylinder Proportioning

More information

For Customer Service, Rev A - 6/ OF 6

For Customer Service,  Rev A - 6/ OF 6 Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand

More information

Similar to trusses, frames are generally fixed, load carrying structures.

Similar to trusses, frames are generally fixed, load carrying structures. Similar to trusses, frames are generally fixed, load carrying structures. The main difference between a frame and a truss is that in a frame at least one member is a multi force member (çoklu kuvvet elemanı).

More information

Continuing Education Course #207 What Every Engineer Should Know About Structures Part B Statics Applications

Continuing Education Course #207 What Every Engineer Should Know About Structures Part B Statics Applications 1 of 6 Continuing Education Course #207 What Every Engineer Should Know About Structures Part B Statics Applications 1. As a practical matter, determining design loads on structural members involves several

More information

SOLUTION 8 1. a+ M B = 0; N A = 0. N A = kn = 16.5 kn. Ans. + c F y = 0; N B = 0

SOLUTION 8 1. a+ M B = 0; N A = 0. N A = kn = 16.5 kn. Ans. + c F y = 0; N B = 0 8 1. The mine car and its contents have a total mass of 6 Mg and a center of gravity at G. If the coefficient of static friction between the wheels and the tracks is m s = 0.4 when the wheels are locked,

More information

FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL

FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all

More information

ANALYSIS OF FRICTION BRAKES

ANALYSIS OF FRICTION BRAKES CHAPTER III ANALYSIS OF FRICTION BRAKES This chapter gives a brief account of all the governing equations and brake design parameters. These governing equations and design parameters are discussed with

More information

Working performance. Access & Service

Working performance. Access & Service D U S T R L D C L G Q U P M T 850 D U S T R L D C L G Q U P M T D U S T R L D C L G Q U P M T 850 Concept The 850 is, thanks to the excellent synergy of compact design, superlative sweeping efficiency

More information

PHYA5/2C. (JUN14PHYA52C01) WMP/Jun14/PHYA5/2C/E5. General Certificate of Education Advanced Level Examination June Section B

PHYA5/2C. (JUN14PHYA52C01) WMP/Jun14/PHYA5/2C/E5. General Certificate of Education Advanced Level Examination June Section B Centre Number Surname Candidate Number For Examinerʼs Use Other Names Candidate Signature Examinerʼs Initials Physics A General Certificate of Education Advanced Level Examination June 2014 PHYA5/2C Question

More information

KOBELCO NEW FEATURES SK115SR

KOBELCO NEW FEATURES SK115SR KOBELCO NEW FEATURES OF SK115SR K O B E L C O - SK115SR N E W F E A T U R E - E L E G A N T M O N I T O R D E S I G N The new multi- display monitor, attractively designed, provides more information about

More information

Sizing caliper disc brakes can be an easy process.

Sizing caliper disc brakes can be an easy process. Sizing caliper disc brakes can be an easy process. The goal is to determine how much braking tque is required and finding the most cost effective and efficient brake and disc diameter package. Go to the

More information

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts

More information

1. An experimental device imparts a force of magnitude F = 225 N to the front edge of the rim at A to simulate the effect of a slam dunk.

1. An experimental device imparts a force of magnitude F = 225 N to the front edge of the rim at A to simulate the effect of a slam dunk. 1. An experimental device imparts a force of magnitude F = 225 N to the front edge of the rim at A to simulate the effect of a slam dunk. Determine the moments of the force F about point and about point

More information

DISTRIBUTION CONDUCTOR STRINGING EQUIPMENT & TECHNIQUES

DISTRIBUTION CONDUCTOR STRINGING EQUIPMENT & TECHNIQUES DISTRIBUTION CONDUCTOR STRINGING EQUIPMENT & TECHNIQUES FOR THE 21 ST CENTURY PRESENTED AT: SOUTHWEST TRAINING EXPO FEBRUARY, 2000 PRESENTED BY: JOHN R. WHITT SR. VICE PRESIDENT 1 When the decision is

More information

SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS

SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...

More information

BUILT TOUGH. P.O. Box 845 Winona, MN Ph Tf Tech Support Fx

BUILT TOUGH. P.O. Box 845 Winona, MN Ph Tf Tech Support Fx BUILT TOUGH P.O. Box 845 Winona, MN 55987 Ph 507.474.6250 Tf 800.749.1064 Tech Support 507.457.3346 Fx 507.452.5217 sales@ozliftingproducts.com QUALITY CONTROL In our continued commitment to quality, we

More information

INSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800

INSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800 WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer

More information

1. Attempt any ten of the following : 20

1. Attempt any ten of the following : 20 *17204* 17204 21314 3 Hours/100 Marks Seat No. Instructions : (1) All questions are compulsory. (2) Answer each next main question on a new page. (3) Illustrate your answers with neat sketches wherever

More information

Principles of Engineering Midterm Exam

Principles of Engineering Midterm Exam Principles of Engineering Midterm Exam Instructions: Respond to all questions below by circling the correct answer, or by writing your answer in the blank space. Use a dark pen/pencil and write neatly

More information

SOLUTION (17.3) Known: A simply supported steel shaft is connected to an electric motor with a flexible coupling.

SOLUTION (17.3) Known: A simply supported steel shaft is connected to an electric motor with a flexible coupling. SOLUTION (17.3) Known: A simply supported steel shaft is connected to an electric motor with a flexible coupling. Find: Determine the value of the critical speed of rotation for the shaft. Schematic and

More information

Announcements. Principle of Work and Energy - Sections Engr222 Spring 2004 Chapter Test Wednesday

Announcements. Principle of Work and Energy - Sections Engr222 Spring 2004 Chapter Test Wednesday Announcements Test Wednesday Closed book 3 page sheet sheet (on web) Calculator Chap 12.6-10, 13.1-6 Principle of Work and Energy - Sections 14.1-3 Today s Objectives: Students will be able to: a) Calculate

More information

Polyflex JB and Micro-V Belt Drive Selection Procedures

Polyflex JB and Micro-V Belt Drive Selection Procedures Polyflex JB and Micro-V Belt Drive Selection Procedures How to Design Polyflex JB and Micro-V Belt Drives Note: The upcoming drive selection and engineering sections provide information for Polyflex JB

More information

M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features

M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features T E C H N I C A L I N F O R M A T I O N M A N U A L F O R T H E A 1 0 V 0 V A R I A B L E D I S P L A C E M E N T P U M P S A10V0 PUMP Features High Efficiency through load sensing (= fuel savings) Maximum

More information

YFM50S (5YF1) U.S.A. YFM50S (5YF2) CANADA YFM50S (5YF3) FRANCE YFM50S (5YF1) OCEANIA

YFM50S (5YF1) U.S.A. YFM50S (5YF2) CANADA YFM50S (5YF3) FRANCE YFM50S (5YF1) OCEANIA YFM50S (5YF1) U.S.A. YFM50S (5YF2) ADA YFM50S (5YF3) NCE YFM50S (5YF1) ANIA 1C5YF-100E1 ( 2C5YF-100E1 ) A2 YFM50S PARTS CATALOGUE 2003 by Yamaha Motor Co., Ltd. 1st edition, May 2003 All rights reserved.

More information

Installation instructions, accessories. Snow chains

Installation instructions, accessories. Snow chains Instruction No 30664147 Version 1.0 Part. No. Snow chains R7700468 страница 1 / 15 Equipment A0000162 R7700458 страница 2 / 15 R7700448 страница 3 / 15 INTRODUCTION Read through all of the instructions

More information

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive. Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)

More information

NAME: Given Formulae: Law of Cosines: Law of Sines:

NAME: Given Formulae: Law of Cosines: Law of Sines: NME: Given Formulae: Law of Cosines: EXM 3 PST PROBLEMS (LESSONS 21 TO 28) 100 points Thursday, November 16, 2017, 7pm to 9:30, Room 200 You are allowed to use a calculator and drawing equipment, only.

More information

INSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526

INSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526 ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation

More information

Chapter Objectives. Copyright 2011 Pearson Education South Asia Pte Ltd

Chapter Objectives. Copyright 2011 Pearson Education South Asia Pte Ltd Chapter Objectives To develop the equations of equilibrium for a rigid body. To introduce the concept of the free-body diagram for a rigid body. To show how to solve rigid-body equilibrium problems using

More information

2D - STRIP ANCHOR LIFTING SYSTEM

2D - STRIP ANCHOR LIFTING SYSTEM 2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU UNIVERSAL

More information

Matlab Sheet 2. Arrays

Matlab Sheet 2. Arrays Matlab Sheet 2 Arrays 1. a. Create the vector x having 50 logarithmically spaced values starting at 10 and ending at 1000. b. Create the vector x having 20 logarithmically spaced values starting at 10

More information