Inspection Report. Coating name: IGP DURA xal IGP Pulvertechnik AG Industrie Stelz, Ringstraße Wil Schweiz. Job number:
|
|
- Alvin White
- 5 years ago
- Views:
Transcription
1 Inspection Report Referred to: AAMA , Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminium Extrusions and Panels Coating name: IGP DURA xal 4201 Client: IGP Pulvertechnik AG Industrie Stelz, Ringstraße Wil Schweiz Job number: Samples receipt: Start of testing: End of testing: Creation date: Number of pages: 10 pages Reproduction, duplication, translation and use of assessment/report for advertising or transmission to third parties whether as a whole, shortened or in an abridged version requires written permission. The results documented in this report only refer to samples / records made available and belonging to them. Accredited by DAkkS (Deutsche Akkreditierungsstelle GmbH) according to German Industrial Standard DIN EN ISO/IEC accredited test laboratory. The accredited test methods are marked with an asterix *. IFO Institut fuer Oberflaechentechnik GmbH Alexander-von-Humboldt-Str Schwaebisch Gmuend Germany Managing Directors: Michael Mueller, Marc Holz District court Ulm HRB VAT No. DE Phone: Website: Bank account: BW Bank Bank code: , Account SWIFT/BIC: SOLADEST IBAN: DE Tax authority: Finanzamt Schwaebisch Gmuend Tax number: 83085/24935
2 Inspection report Page 2 of 10 CONTENTS Page 1 FORMULATION Status and Type of Samples / Sampling 3 2 Test Results Color Uniformity Specular Gloss Dry Film Hardness Film Adhesion Impact Resistance Abrasion Resistance Chemical Resistance Muriatic Acid Resistance Mortar Resistance Nitric Acid Resistance Detergent Resistance Window Cleaner Resistance Corrosion Resistance Humidity Resistance Salt Spray Resistance Weather Exposure 10 3 CONCLUSION 10
3 Inspection report Page 3 of 10 1 FORMULATION The Institute was instructed by the client for carry out all necessary tests according to the AAMA specification , section 8.1 up to Status and Type of Samples / Sampling The sample preparation was carried out by the client. Material: Pretreatment: Coating: Cure: Application date: Q-Panels Co. Q-Lab Cr-(VI) IGP DURA xal RAL 7016 HR & RAL 9005 HR 180 C / 15 minutes for RAL 7016 HR for RAL 9005 HR 2 Test Results 2.1 Color Uniformity Requirements according AAMA part 8.1: - Color uniformity shall be consistent with the color range or numerical value as established between the approval source and the applicator - Suggested maximum deviation is 2ΔE units Color uniform with RAL 7016; ΔE = 0,44 Color uniform with RAL 7016; ΔE = 0,42 Color uniform with RAL 7016; ΔE = 0,57 Color uniform with RAL 9005; ΔE = 0,78 Color uniform with RAL 9005; ΔE = 0,82 Color uniform with RAL 9005; ΔE = 0,90
4 Inspection report Page 4 of Specular Gloss Requirements according AAMA part 8.2: - Gloss values shall be within ± 5 units of the manufacturer s specification Manufacturer s value: 5, ,6 5,4 Manufacturer s value: 3, ,8 3,7 2.3 Dry Film Hardness Requirements according AAMA part 8.3: - F Hardness and no rupture of the film
5 Inspection report Page 5 of Film Adhesion Requirements according AAMA part 8.4: - No loss of adhesion - No removal of film - No blistering Test: Dry adhesion Wet adhesion Boiling water adhesion Test: Dry adhesion Wet adhesion Boiling water adhesion 2.5 Impact Resistance Requirements according AAMA part 8.5: -
6 Inspection report Page 6 of Abrasion Resistance Requirements according to AAMA part 8.6: - The abrasion coefficient value of the coating shall be 20 minimum A = 83 liters per mil A = 85 liters per mil A = 87 liters per mil A = 78 liters per mil A = 95 liters per mil A = 69 liters per mil 2.7 Chemical Resistance Muriatic Acid Resistance Requirements according to AAMA part 8.7.1: - No blistering - No visual change
7 Inspection report Page 7 of Mortar Resistance Requirements according to AAMA part 8.7.2: - No loss of adhesion - No visual change RAL 7021: Nitric Acid Resistance Requirements according to AAMA part 8.7.3: - Not more than 5ΔE units (Hunter) of color change ΔE = 4,62 ΔE = 5,20 ΔE = 4,55 ΔE = 0,23 ΔE = 0,43 ΔE = 0,39
8 Inspection report Page 8 of Detergent Resistance Requirements according to AAMA part 8.7.4: - No loss of adhesion of the film to the metal - No blistering - No visual change Window Cleaner Resistance Requirements according to AAMA part 8.7.5: - No blistering - No change in appearance - No removal of film under the tape within or outside of the cross-hatched area
9 Inspection report Page 9 of Corrosion Resistance Humidity Resistance Requirements according AAMA part 8.8.1: - No formation of blisters to extent greater than Few blisters size no. 8 Duration: 3000 hours Duration: 3000 hours Salt Spray Resistance Requirements according AAMA part 8.8.2: - Minimum rating of 7 on scribe or cut edges - Minimum blister rating of 8 within the test specimen field Duration: 3000 hours Duration: 3000 hours
10 Inspection report Page 10 of Weather Exposure Requirements according AAMA part 8.9: - Maximum of 5ΔE units (Hunter) of color change after exposure - Chalking shall be no more than rating no. 8 for colors - Gloss retention shall be a minimum of 50% after exposure - Less than 10 percent film loss after exposure Sample: Duration: Sample 4 5 years Test is still outstanding. Sample 5 Sample 6 3 CONCLUSION All samples fulfill the requirements according to the AAMA specification except the weather exposure part 8.9, which is still outstanding. All tests were conducted in accordance with the AAMA specification Schwäbisch Gmünd, J. Bihlmaier M. Scheetz Deputy laboratory manager Project engineer
CONSTRUCTION MATERIALS
CONSTRUCTION MATERIALS T E C H N O L O G I E S LABORATORY TEST REPORT Report for: 6 Cherry Ave Penticton, BC VA L7 Canada Product(s): Deksmart Ultra 68mil Decking Membrane Manufacturer: O Sullivan Films,
More informationTest Report For: FunderMax GmbH. MAX Resistance 2. SEFA , 2.1 Chemical/Stain Resistances
4700 Broadmoor SE, Suite 200 Kentwood, MI 49512 Telephone: 616-656-7401 Facsimile: 616-656-2022 www.intertek-etlsemko.com P.O. No.: MP Page 1 of 9 Test Report For: FunderMax GmbH MAX Resistance 2 SEFA
More informationCreating New Barriers with Graphene
Creating New Barriers with Graphene Authors: Richard Akam, Lynn Chikosha & Tim von Werne Introduction Graphene was first isolated in 2004 by Andre Geim and Konstantin Novoselov at Manchester University.
More informationIndependent, accredited testing station Member laboratory of STL and LOVAG TEST CONFIRMATION. on the given range of performed tests
Independent, accredited testing station Member laboratory of STL and LOVAG TEST CONFIRMATION on the given range of performed tests 3M Laboratories Europe Zweigniederlassung der 3M Deutschland GmbH Carl-Schurz-Str.
More informationIndependent, accredited testing station Member laboratory of STL and LOVAG TEST CONFIRMATION. on the given range of performed tests
Independent, accredited testing station Member laboratory of STL and LOVAG TEST CONFIRMATION on the given range of performed tests 3M Laboratories Europe Zweigniederlassung der 3M Deutschland GmbH Carl-Schurz-Str.
More informationTEST CERTIFICATE PARTIAL REPRODUCTION OF THE PRESENT CERTIFICATE IS PROHIBITED WITHOUT PRIOR WRITTEN PERMISSION BY EKANAL.
TEST CERTIFICATE Certificate Number 0588 Certificate Date 12 / 01 / 2006 Client Specimen description EXALCO S.A. ALUMINIUM INDUSTRY 8th klm. NATIONAL ROAD LARISA-THESSALONIKI GR 411 10 LARISA Double Sash
More informationPage 2 of 14 Report Ref. No
age 2 of 14 Summary of testing: Tests performed (name of test and test clause): Clause 6.1, Initial measurements: - MST 01: Visual inspection - 10.2: Maximum power determination - MST 16: Dielectric withstand
More informationFabric Medley Manufacturer Gabriel A/S
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.com Telephone +49(89)85602 3566 Dominik.Reif@mbbm.com 2015-06-09 Fabric Medley
More informationFabric RUNNER Manufacturer Gabriel A/S
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.com Telephone +49(89)85602 3206 Eva.Mueller@mbbm.com 2015-03-03 Fabric RUNNER
More informationPRODUCT SPECIFICATION FOR Micro SIM +Nano SIM/Micro SD (T/F)Card Connector SERIES
Page 1 of 5 1.0 SCOPE This Specification covers Micro SIM +Nano SIM/Micro SD Card Connector SERIES 2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings and other sections of this specification
More informationNatural Exposure Testing VS Accelerated Weathering... The Right Choice.
Natural Exposure Testing VS Accelerated Weathering... The Right Choice. Founded in 1956 Specialize in material durability testing equipment and services Bolton, England Q-Lab Europe Cleveland,Ohio Headquarters
More informationFabric EVENT SCREEN Manufacturer Gabriel A/S
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.com Telephone +49(89)85602 3206 Eva.Mueller@mbbm.com 2015-03-03 Fabric EVENT
More informationFabric HUSH Manufacturer Gabriel A/S
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.com Telephone +49(89)85602 3206 Eva.Mueller@mbbm.com 2015-02-11 Fabric HUSH
More informationRetroreflective Prismatic License Plate Film
Avery Dennison L-6050 Series Issued: April 2011 Avery Dennison L-6050 Series Retroreflective sheeting is a premium quality prismatic retroreflective material designed and engineered for the production
More informationAvery Dennison LV-0700 Series Retroreflective Validation Decal Film Issued: July 2013
LV-0700 Series Reflective film is a quality, enclosed lens retorreflective material. LV- 0700 is ideal for vehicle tag and sticker requirements where low temperature application is desired such as for
More informationFabric XPRESS Manufacturer Gabriel A/S
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.com Telephone +49(89)85602 3206 Eva.Mueller@mbbm.com 2015-03-03 M104146/18
More informationREPORT OBJECT: study on the importance of pretreatment for aluminum surfaces, previous to powdercoating. REQUESTED BY: Decoral System 02/10/14
OBJECT: study on the importance of pretreatment for aluminum surfaces, previous to powdercoating. REQUESTED BY: Decoral System 02/10/14 OBJECT: study on the importance of pretreatment for aluminum surfaces,
More informationArmy Air Forces Specification 7 December 1945 EQUIPMENT: GENERAL SPECIFICATION FOR ENVIRONMENTAL TEST OF
Army Air Forces 41065 Specification 7 December 1945 EQUIPMENT: GENERAL SPECIFICATION FOR ENVIRONMENTAL TEST OF A. APPLICABLE SPECIFICATIONS A-1. The current issue of the following specifications, in effect
More informationAvery Dennison L-3050 Series Retroreflective License Plate Film September 2013 Revision 2
Avery Dennison L-3050 Series Retroreflective sheeting is a premium quality enclosed lens retroreflective material designed and engineered for the production of high quality embossed license plates. It
More informationImproving Adhesion: Examining the Electrochemistry of Organic Inhibitors
Improving Adhesion: Examining the Electrochemistry of rganic Inhibitors Benefits of rganics Chemisorb onto metallic substrates Complex with metal ions at substrate Neutralize & absorb the corrodents Decrease
More informationAvery Dennison LW Series Retroreflective Window Sticker Film Issued: July 2013
LW series window stickers are designed to be variable printed for use inside or outside the vehicle. Reflective permit stickers provide easy verification for authenticity. Performance: L-S-300C Table IV
More informationGESELLSCHAFT FÜR ELEKTRISCHE HOCHLEISTUNGSPRÜFUNGEN Mitglied der Short-Circuit-Testing Liaison (STL) Test Report
Mitglied der Short-Circuit-Testing Liaison (STL) Test Report Report-No.: 9725Fr Copy-No.: 00 Contents: 16Sheets Equipment under Test: Manufacturer: Client: Metal-enclosed, single-pole metal-clad and SF
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LUXOTTICA QUALITY PERFORMANCE LABORATORY - OAKLEY Oakley Inc., One Icon Foothill Ranch, CA 92610 Dr. Jane Wang Phone: 949 672 6874 MECHANICAL Valid To: May
More informationReport TAG3-UA-1212-E07 Testing of the transmission and the g-value of a polycarbonate multiwall panel AKYVER 16/7 IR Control Grey
a polycarbonate multiwall panel AKYVER for: Kaysersberg Plastics BP 27 77 route de Lapoutroie 68240 Kaysersberg France prepared by: Ulrich Amann Dr Helen Rose Wilson Johannes Hanek 18 th December, 2012
More informationESL. Frequency ESR. Geometry AEC-Q200 IEC Capacitors. Insulation Current. Vibration. Temperatur Change Environmental Testing
Qualification of DC-Link Capacitors for Automotive Use General Requirements, Test Conditions and Tests IEC 60068-1 Insulation Current Vibration ESL Component Capacitors Frequency Temperatur Change Environmental
More informationLevasil and Bindzil colloidal silica dispersions. for the adhesive industry uses and benefits
and Bindzil colloidal silica dispersions for the adhesive industry uses and benefits Colloidal silicas from Eka at a glance and Bindzil are aqueous colloidal dispersions of amorphous silica. They can be
More informationAnnex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15133-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 24.01.2018 to 23.01.2023 Holder of certificate: Hexagon
More informationSpezifikation Z56-xx Series ZIF FFC/FPC Connector 0,5mm Pitch Double Contact H1,96mm Piano
1 Scope This Specification covers the construction and characteristics of 0,5mm Pitch FFC and FPC (Flat Flexible Cable and Flat PCB Cable ) of Z56-xx ZIF Connector Series. The part shall satisfy the following
More informationADDITIVES. HIGH SOLIDS AND WATER- BORNE COATINGS Werner J. Blank Rudy Berndlmaier & Dan Miller King Industries Inc.
You are now at www.wernerblank.com HOME NEWS PUBLICATIONS LECTURES PATENTS DOWNLOADS ADDITIVES FOR HIGH SOLIDS AND WATER- BORNE COATINGS Werner J. Blank Rudy Berndlmaier & Dan Miller King Industries Inc.
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PRODUCT SPECIFICATION 1. SCOPE 1.0mm9(&FPC 2$ This specification covers
More informationRenolit stretch ceilings
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.de Dipl.-Ing. (FH) Eva Müller Telephone +49(89)85602 3206 Eva.Mueller@mbbm.com
More informationApplications of Neuburg Siliceous Earth in Coatings and Related Systems. We supply material for good ideas
Applications of Neuburg Siliceous Earth in Coatings and Related Systems We supply material for good ideas Contents related 1. Coatings 2. Coatings related 3. New Applications 2 Electro Deposition Paints
More informationFUNDERMAX GMBH TEST REPORT
FUNDERMAX GMBH TEST REPORT SCOPE OF WORK SEFA 3 2010, 2.1 Analysis of Max Compact Interior Plus White and Black Plaques REPORT NUMBER 103600635GRR 001a ISSUE DATE 25 September 2018 PAGES 22 DOCUMENT CONTROL
More informationTEST REPORT No. : XMML Date : Jan.06, 2012 Page: 1 of 12
Page: 1 of 12 KINGKONREE INTERNATIONAL CHINA SURFACE INDUSTRIAL CO., LTD 1213-1255/12F, DONGMING BLD., MINZHI DADAO, BAOAN DISTRICT, SHENZHEN P.R. CHINA The following sample(s) was/ were submitted and
More informationCollector test according to EN ,2:2002
Test Report: KTB Nr. 2003-18-b-en Collector test according to EN 12975-1,2:2002 for: RM Solar Ltd Brand Name: S-Class Responsible for Testing: Dipl.-Ing. (FH) A. Schäfer Date: 17th July 2006 Address: Fraunhofer-Institute
More informationTechnical Report No a
Technical Report No. 71361308a dated 2009-11-17 Client: Manufacturer and / or location of manufacturing: Hartmann Elektronik GmbH Motorstraße 43 70499 Stuttgart see client Unit/s under test (UUT): Test
More informationSUMMARY OF OFFICIAL TEST REPORTS
SUMMARY OF OFFICIAL TEST REPORTS 2014 TABLE OF CONTENTS Manufactured by: SPM Thermo-Shield Inc. (USA) Tel.: 001-239-234-5832 Email: spm@thermoshield.com Fax: 001-239-236-6767 www.thermoshield.com Thermal
More informationSolderSleeve Devices Specification For Commercial Wire Splices. Table of Contents
Page 1 of 15 SolderSleeve Devices Specification For Commercial Wire Splices Table of Contents Chapter Pages 1.0 General Requirements 1.1 Design of the Electrical Connection-Reminder Concerning The Approval
More informationREPORT NUMBER: GZU-001 ORIGINAL ISSUE DATE:
REPORT NUMBER: 131119020GZU-001 ORIGINAL ISSUE DATE: 2013-12-12 EVALUATION CENTER TEST REPORT Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Block E, No.7-2 Guang Dong Software Science Park,
More informationAnnex to the Accreditation Certificate D-RM according to ISO Guide 34:2009 and DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-RM-14176-01-00 according to ISO Guide 34:2009 and DIN EN ISO/IEC 17025:2005 Period of validity: 21.04.2017 to 04.08.2019 date
More informationTFI Report Impact Sound Insulation
TFI Report 462062-06 Impact Sound Insulation Customer Unifloor BV Munsterstraat 24 748 EV Deventer NETHERLANDS Product floor underlay Redupax This report includes 2 pages and annex(es) Responsible at TFI
More informationVOC TEST REPORT CDPH
Adolf Würth GmbH und Co. KG Reinhold-Würth Str. 12-17 74653 Künzelsau GERMANY Eurofins Product Testing A/S Smedeskovvej 38 8464 Galten Denmark VOC@eurofins.com www.eurofins.com/voc-testing VOC TEST REPORT
More informationThis specification covers the requirements for product performance, test methods and quality assurance provisions of FG Terminal.
DESIGN OBJECTIVES The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore AMP Ltd makes no representation or warranty, express
More informationSWARCO LIMBURGER LACKFABRIK GmbH Road Marking Systems. 1-component Afterglow paint system TECHNICAL INFORMATION
1-component Afterglow paint system TECHNICAL INFORMATION 1-component Afterglow paint system Art.-No.: 8129016 white, 1-comp. Afterglow primer Art.-No.: 8121111 yellow-green, 1-comp. Afterglow paint Art.-No.:
More informationA L I O N Technical Center. Test Report. Port Coquitlam, British Columbia, Canada
FOR: Port Coquitlam, British Columbia, Canada Sound Absorption CONDUCTED: 2018-03-19 Page 1 of 7 ON: Model F202-2448 - Hercules absorption panels TEST METHOD Riverbank Acoustical Laboratories is accredited
More informationPRODUCT SPECIFICATION
SCOPE 1.25mm 9(& 2$ 2 This specification covers the 1.25 mm PITCH WIRE TO BOARD CONNECTOR (DUAL TYPE) series PRODUCT NAME AND PART NUMBER
More information3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
More information3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA
Page of 8 3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA Product Specification 78-50-0-7 Revised 08-09- Page of 8 Table of Contents Title
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More informationASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS
Revision index Date of implementation A 15/03/2013 ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS 4, avenue du Recteur-Poincarré, 75782 Paris Cedex 16 Tel. 33.(0)1.64.68.84.97 Fax. 33.(0)1.64.68.83.45
More informationStandard Classification System for Rubber Products in Automotive Applications 1
Designation: D 2000 0 Approved by Society of Automotive Engineers SAE Recommended Practice J200 Standard Classification System for Rubber Products in Automotive Applications 1 This standard is issued under
More informationBindzil CC in the coating industry. Silane modified colloidal silica dispersions functions and applications
Bindzil CC in the coating industry Silane modified colloidal silica dispersions functions and applications Small particles add big advantages Performance enhancing silane, modified colloidal silica for
More informationLaboratory Test Results. Evaluating Resimac Reischem 512UCEN Epoxy Coating System per ISO :2007, Chemical Immersion
arch 15, 1 Laboratory Test Results Evaluating Resimac Reischem 51UCE Epoxy Coating System per ISO 1-1:7, Chemical Immersion Prepared for: Dalco Services Inc 15 Petrolia Dr. Red Deer, AB TE 1B Prepared
More informationCollector test according to EN ,2:2006
Test Report: KTB Nr. 2007-41-en Collector test according to EN 12975-1,2:2006 for: SOLAR ENERGY,LTD, Brand name: SCM-Series Responsible for testing: Dipl.-Ing. (FH) K. Kramer Date: 26th October 2007 Address:
More informationVerification Test Report J11458-Val
Verification Test Report Product Tested: Test Type: Standard: VCCM600 Power Supplies Verification Testing Customer Specified Environmental Testing Non-operational and operational EN60068-2-27 Mechanical
More informationPeriod of validity: to date of issue:
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-RM-14176-01-00 according to the relevant clauses of ISO Guide 34: and DIN EN ISO/IEC 17025:2005 Period of validity: 11.01.2016
More informationSimulation Report (Revised) Rendered To: Showcase Custom Vinyl Windows 1002 Olde Towne Drive Irving, TX 75061
ETC Laboratories ETC Laboratories Corporate Offices / Laboratories 297 Buell Road Rochester, NY 14624 (585) 328-7668 Fax: (585) 328-7777 Simulation Report (Revised) Rendered To: Showcase Custom Vinyl Windows
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationPRETREATMENT TECHNICAL DATA SHEET IRON PHOSPHATE CLEANER COATER / CONVERSION COATING PRODUCT DESCRIPTION
INDUSTRIAL COATINGS CF51HD CHEMFOS 51HD IRON PHOSPHATE CLEANER COATER / CONVERSION COATING PRODUCT DESCRIPTION CHEMFOS 51HD is a heavy duty dual action chemical cleaner-coater designed to remove soils
More informationPractical Experiences in Climatic Testing
CEEES Meeting London September 2006 Practical Experiences in Climatic Testing Eduard Pohle ofi-research Institute for Chemistry and Technology Arsenal Object 213, A 1030 Vienna, Austria A small presentation...
More informationstylegreen Iceland Moss / Reindeer Moss of the company FlowerArt
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.com Dipl.-Phys. Elmar Schröder Telephone +49(89)85602 145 Elmar.Schroeder@mbbm.com
More informationACX Advanced Ceramic X
LF 1608 Series Multilayer Chip Low-Pass Filters ACX Features Monolithic structure replacing one inductor and three capacitors. Applications 0.8-6GHz wireless communication systems, including DECT / PACS
More informationA L I O N Technical Center. Test Report
FOR: Beachwood, OH Sound Absorption CONDUCTED: 2017-10-30 Page 1 of 7 ON: Absorption Sheets TEST METHOD Riverbank Acoustical Laboratories is accredited by the U.S. Department of Commerce, National Institute
More informationg/cm³ DAkkS Calibration Laboratory for Temperature and Density High-precision calibration for temperature and density
High-precision calibration for temperature and density g/cm³ F K C DAkkS Calibration Laboratory for Temperature and Density Accredited DAkkS laboratory (D-K-15223-01-00) for temperature and density measurements
More informationTechnical Report No b
Technical Report No. 71361308b dated 2009-11-18 Client: Manufacturer and / or location of manufacturing: Hartmann Elektronik GmbH Motorstraße 43 70499 Stuttgart see client Unit/s under test (UUT): Test
More informationWIESON TECHNOLOGIES CO., LTD.
TABLE OF CONTENT 1. Scope.... 2 2. Reference Documents. 2 3. Material and Components.... 2 4. Design and Construction.... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements and
More informationSunburned Products: Numerical Aging caused by Sun Exposition
Sunburned Products: Numerical Aging caused by Sun Exposition Dr. Axel Müller & Teodora Vatahska HTCO GmbH Freiburg, Germany STAR Global Conference 2012 March 21 th 2012 Amsterdam, Netherlands HTCO: Expertise
More informationREPORT NUMBER: GZU -001 ORIGINAL ISSUE DATE:
REPORT NUMBER: 140430030GZU -001 ORIGINAL ISSUE DATE: 2014-5-6 EVALUATION CENTER TEST REPORT Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Block E, No.7-2 Guang Dong Software Science Park, Caipin
More informationACX Advanced Ceramic X
LF 2012 Series Multilayer Chip Low-Pass Filters Features Monolithic structure replacing two inductors and five capacitors. RoHS compliant Applications 0.8-6GHz wireless communication systems, including
More informationTable of Contents What is ? The Chemistry of What Does Protect Against? What Does the Package Include? The
1 Table of Contents What is DIAMOND PLATE? The Chemistry of DIAMOND PLATE What Does DIAMOND PLATE Protect Against? What Does the DIAMOND PLATE Package Include? The DIAMOND PLATE Warranty How Does a Consumer
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-14595-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.12.2017 to 13.10.2021 Holder of certificate: Forschungszentrum
More informationVOC TEST REPORT AgBB
Bostik SA 253 rue du Président Wilson 93211 La Plaine St Denis Cedex FRANCE Eurofins Product Testing A/S Smedeskovvej 38 8464 Galten Denmark VOC@eurofins.com www.eurofins.com/voc-testing VOC TEST REPORT
More informationTFI Report Impact Sound Insulation
TFI Report 462062-05 Impact Sound Insulation Customer Unifloor BV Munsterstraat 24 748 EV Deventer NETHERLANDS Product floor underlay Redupax This report includes 2 pages and annex(es) Responsible at TFI
More informationQuick Guide KSAT. At a glance how it works
2012 UMS GmbH, Munich, Germany Print #: KSAT12.12e Subject to modifications and amendments without notice. KSAT and KSAT VIEW are registered trademarks of UMS GmbH, Munich Printed on paper from chlorine-free
More information3000 Residential 4000 Commercial Aluminum Fence Systems Lifetime Limited Warranty
3000 Residential 4000 Commercial Aluminum Fence Systems Lifetime Limited Warranty 3000 Series - Lifetime Limited Warranty - w/triad Finial 36 and 42 Heights Not Available 36 and 42 Heights Not Available
More informationFabric REFLECTACOUSTIC
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.com Dipl.-Ing. (FH) Eva Müller Telephone +49(89)85602 3206 Eva.Mueller@mbbm.com
More informationCollector test according to EN ,2 : 2006
Test Report: KTB No. 2006-27 Collector test according to EN 12975-1,2 : 2006 for: Himin Solar Energy Group Co., Ltd., China Brand Name: HUJ 16/2.1, HUJ 12/2.1, HUJ 16/1.8, HUJ 12/1.8, HUJ 16/1.6 and HUJ
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationTHERMAL EFFUSIVITY AS A NON-DESTRUCTIVE METHOD TO CHARACTERIZE THIN FILMS
AD TECHNICAL REPORT ARCCB-TR-03014 THERMAL EFFUSIVITY AS A NON-DESTRUCTIVE METHOD TO CHARACTERIZE THIN FILMS Mark F. Fleszar NOVEMBER 003 APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED REPORT DOCUMENTATION
More informationThe Perfect Symmetry of Form and Function
The Perfect Symmetry of Form and Function WeatherMAX 80, the best thing to happen in the cover making world in the last ten years. Dolphin Sails Harwich, UK WeatherMAX 80 Super high strength and durability
More informationCollector test according to EN ,2:2006
Test Report: KTB Nr. 2007-07-aao-en Collector test according to EN 12975-1,2:2006 for: Varmt vand fra solen ApS, Denmark Brand name: VVFS HXX series Responsible for testing: Dipl.-Ing. (FH) K. Kramer Date
More informationTest Results: Results of the test period on 06/19/16 using the Equivalent CTS Method: Thermal transmittance at test conditions (U s ):
NORTH EAST WINDOWS USA, INC. NFRC THERMAL TEST SUMMARY REPORT Report No: NCTL-110-17842-3S Test Specimen NFRC Code Manufacturer: North East Windows USA, Inc. Series/Model: Series CW 300 Window Type: Casement-
More informationQuality assurance for sensors at the Deutscher Wetterdienst (DWD)
Paper submitted to ICAWS 2017: Topic 3 Sustainability of the measurements: Calibration, intercomparisons, laboratory and field performance tests, quality assurance and control assessment for traceable
More informationTraining program for x-ray inspection film (RT)
of MTU Aero Engines AG Training program for x-ray inspection film (RT) In the NDT training course the following knowledge will be educated. approved by NANDTB Germany Preface + + + Introduction + + + Properties
More informationNew types of silicone resin open up wider fields of application. By Marco Heuer, Evonik Resource Efficiency GmbH.
50 SILICONE RESINS Source: by-studio - Fotolia.com TAKING THE HEAT New types of silicone resin open up wider fields of application. By Marco Heuer, Evonik Resource Efficiency GmbH. The properties of the
More informationACRIFIX. Adhesives and Auxiliaries
ACRIFIX Adhesives and Auxiliaries For a perfect union PLEXIGLAS, the world s first acrylic, manufactured by our company, can be joined by a variety of methods. A distinction is made between permanent and
More informationEvidence of Performance Thermal transmittance
Evidence of Performance Thermal transmittance Test Report 10-001988-PR02 (PB-H01-06-en-01) Client Mályi-Glass Kft. Pesti ut 7 3434 Mályi Hungary Product Insulating glass unit System designation Variants
More informationPRODUCT SPECIFICATIONS
PRODUCT SCIFICATIONS CUSTOMER : CUSTOMER'S REFERENCE : 3/34 3/35 3/36 Series DESCRIPTIONS : SHENGXIN TY : METALLIZED POLYESTER FILM CAPACITOR-BOX series Fig. w T T W H.5max P 20min H S L0.5max Fig Fig2.
More information2019 Award Nomination
Title of Innovation: Graphene based anti-corrosive system Nominee(s) W Weaver, A Potts, L Chikosha Category: Coatings and Linings 2019 Award Nomination Coatings and Linings Cathodic Protection Materials
More informationTIR100-2 Measurement of Thermal Emissivity
TIR100-2 Measurement of Thermal Emissivity Dr. Thomas Meisel INGLAS GmbH & Co. KG Introduction Some basic physics Principles of measurement pren 15976 Working with the TIR100-2 Practical course INGLAS
More informationPhotoinitiators. For cationic UV curing processes.
Photoinitiators For cationic UV curing processes. / Cationic Photoinitiators from Deuteron: Benzene-free, low odour, rapid curing speed. The cationic photo-initiated polymerisation of epoxides and oxetanes
More informationProduct Data Sheet PD-0036-B. 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series
Product Data Sheet PD-0036-B 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series Page: 1 of 7 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2 3.1 Test Specimens...2 3.2 Standard Test
More informationCollector test according to EN ,2:2006
Test Report: KTB Nr. 2006-39-a-en Collector test according to EN 12975-1,2:2006 for: TWL-Technologie GmbH, Deutschland Brand name: FK200 Responsible for testing: Dipl.-Ing. (FH) K. Kramer Date of issue:
More informationAO291 Issue date: Product Data FASSON Transfer Polyimide Matt White TC11 / S8088 / BG50 Wh
FASSON Transfer Polyimide Matt White TC11 / S8088 / BG50 Wh Facestock A matt white topcoated polyimide film with very high dimensional stability, heat and chemical. The high opacity white topcoat is specifically
More informationFabric UDINE. Measurement of sound absorption according to EN ISO 354. Test Report No. M102794/32
Müller-BBM GmbH Robert-Koch-Str. 11 82152 Planegg bei München Telephone +49(89)85602 0 Telefax +49(89)85602 111 www.muellerbbm.de Dipl.-Ing. (FH) Dominik Reif Telephone +49(89)85602 3566 Dominik.Reif@mbbm.com
More informationPolycarboxylate Inhibitors
Polycarboxylate Inhibitors May 2018 Presented to: Potential Licensees NAVAIR Public Release 2018-437. Distribution Statement A: Approved for public release, distribution is unlimited Presented by: Craig
More informationVOC TEST REPORT EMICODE
Polyseam Ltd Shaw Park, Silver Street Huddersfield, West Yorkshire, HD5 9AF UK Eurofins Product Testing A/S Smedeskovvej 38 8464 Galten Denmark VOC@eurofins.com www.eurofins.com/voc-testing VOC TEST REPORT
More informationREPORT NUMBER: MID-001 ORIGINAL ISSUE DATE: April 22, 2016 REVISED DATE: NA. EVALUATION CENTER Intertek 8431 Murphy Drive Middleton, WI 53562
REPORT NUMBER: 102550917MID-001 ORIGINAL ISSUE DATE: April 22, 2016 REVISED DATE: NA TEST REPORT EVALUATION CENTER Intertek 8431 Murphy Drive Middleton, WI 53562 RENDERED TO Cali Bamboo 6675 Mesa Ridge
More informationModel Variations. AGK2000E Stainless steel version for chemically aggressive dispersion liquids.
Generation of solid particles out of suspensions, solutions and biological agents Model Variations AGK2000E Stainless steel version for chemically aggressive dispersion liquids. Page1of7 Description Fig.
More information