Sicherheit zuverlässig produziert.

Transcription

1 Sicherheit zuverlässig produziert.

2 Table of content Comparison between analysers Sycon 2502 and Sycon Analysers for measuring and monitoring water ingredients 5 Sycon 2502 total hardness / carbonate hardness... 5 Sycon 2800 total hardness / carbonate hardness... 6 Sycon 2800 Select determination of water ingredients (e.g.: EDTA concentration)... 7 Accessories for analysers Sycon 2500 / 2501 / 2502 / 2800 / Cleaning supplies... 8 Maintenance sets... 8 Controller for ion exchanger and filtration plants 9 HAcon HAcon Pilot distributors 10 PVcon PVcon Cooler 11 Sample coolers Pre-coolers Reagents for analysers Sycon 2500 / 2501 / 2502 / Residual / total hardness Carbonate hardness Iron content EDTA concentration Reagents for analyser Sycon 3000 (A) 15 Residual / total hardness Carbonate hardness Iron content Reagents for analysers Testomat-FG / -F-BOB / 808 (company Heyl) 16 Residual / total hardness Reagents for analysers Testomat-C-BOB (company Heyl) 17 Carbonate hardness Minus m-value Reagents for analysers Testomat 2000 / ECO (company Heyl) 18 Residual / total hardness Carbonate hardness Safety reliably produced.

3 Table of content Test kits for water analysis based on limit monitoring method 19 Residual hardness Test kits for water analysis based on titration method 20 Total hardness (1 reagent) Total hardness (1 reagent, 1 titration solution) Sulfite (3 reagents) PM-value (3 reagents) Test kits for water analysis based on colorimetric method 23 Aluminium (0,05 2 mg/l Al) Chlorine LR (0,05 1,0 mg/l Cl2) Chlorine dioxide (0,05 0,5 mg/l Cl2) Chlorine / Chlorine dioxide (0,05 0,5 mg/l Cl2) DEHA (0,05 1,0 mg/l DEHA) Iron LR (0,05 1,0 mg/l Fe) Iron LRS (0,01 0,5 mg/l Fe) Iron HR (0,25 10 mg/l Fe) Iron HRS (0,2 10 mg/l Fe) Manganese (0,03 1,0 mg/l Mn) Nitrate (1 50 mg/l NO3 - ) ph 2-5 (2 5 ph) ph 5-8 (5 8 ph) ph 8-12 (8 12 ph) ph- Chlorine (free) Phosphate LR (0,25 10 mg/l PO4 3- ) Phosphate HR (2,5 100 mg/l PO4 3- ) Silicate (0,25 10 mg/l SiO2) Sulfide (0,05 1,0 mg/l S 2- ) Sulfite (0,5 20 mg/l SO3 2- ) Conversion of the units of water hardness dh e fh ppm mval/l mmol/l German degree 1 dh = 1 1,253 1,78 17,8 0,357 0,1783 English degree 1 e = 0, ,43 14,3 0,285 0,142 French degree 1 fh = 0,56 0, ,2 0,1 ppm CaCO3 (USA) 1 ppm = 0,056 0,07 0,1 1 0,02 0,01 mval/l earth alkali ions 1 mval/l = 2,8 3, ,5 mmol/l earth alkali ions 1 mmol/l = 5,6 7, The unit 1 ppm is used here as opposed to the actual meaning of the word in term of 1 mg/l CaCO3.

4 Comparison between analysers Sycon 2502 and Sycon 2800 We offer analysis technology fitting your requirements. Please choose the one which meets your requirements. Sycon 2502 The Sycon 2502 is an analysis device for monitoring the limit value. The limit value is defined by the used reagent and is controlled in a constant time interval. When the limit value is exceeded, a signal is transferred to the control system. Sycon 2800 Beyond that, the Sycon 2800 offers further functions and more detailed information regarding your process water. It measures the exact water hardness and indicates the actual value on the display. A multiplicity of connections is available for further processing of the measured values and the control of the unit. In addition to time and volume controlled analysis intervals you can program two limit values that are independent from each other. Both analysers are characterised by following key features: Maintenance-free full colour sensor No tools needed for maintenance of measuring chamber More than 5000 analyses per bottle of reagent Characteristics Sycon 2502 Sycon 2800 Simple commissioning Intuitive operation Low maintenance Self-calibrating Diagnosis programme Time controlled analysis interval Volume controlled analysis interval - Measured value graph of the last analyses Measured value protocol on SD-card - CAN port - Analogue output ( ma) - Relay function Limit value 1 Limit value 2 - Analysis active / cooling water Ready for operation BOB warning Input function Current monitor External analysis start Analysis abort - Water counter - Range of monitoring Sycon 2502 Sycon 2800 Total hardness 0, dh 0, dh ,8 µmol/l µmol/l Carbonate hardness dkh 0, dkh 3, ,7 µmol/l 1 21,4 µmol/l Shelf life time of reagent 24 months 24 months Safety reliably produced. 4

5 Analysers for measuring and monitoring water ingredients Sycon 2502 total hardness / carbonate hardness Monitoring by controlling the limit value for demand actuated regeneration activation (e.g.: monitoring of the recirculation of condensate in the boiler house) Maintenance-free full colour sensor No tools needed for maintenance of measuring chamber More than 5000 analyses per bottle of reagent Monitoring of one limit value Alarm of lack of reagent / BOB-functionality LED status display Language neutral Analysis start options: o Automatically by time interval o Suppressing of analysis via external switch o Analysis via external controller 3 potential free outputs: o Exceedance of limit value o Malfunction of device o Analysis active (e.g.: valve of a sample cooler) 1 contact input for external controller or current switch The limit is set by the used reagent: Residual- and total hardness dh 0,02 / 0,05 / 0,1 / 0,2 / 0,3 / 0,5 / 1,0 / 2,0 / 3,0 / 5,0 Carbonate hardness dh 1,0 / 1,5 / 2,0 / 3,0 Article name Article No. Voltage Memo Sycon 2502 Analyser on wall mounting plate V Sycon 2501/2502/2800 housing Maintenance set Article name Article No. Memo Maintenance set for Sycon 2500 / 2501 / Pressure reducing strainer for inlet pressure > 4 bar Appropriate reagents, see page 13. 5

6 Analysers for measuring and monitoring water ingredients Sycon 2800 total hardness / carbonate hardness Fully automated determination of water hardness (e.g.: supervision of water intersection) Maintenance-free full colour sensor No tools needed for maintenance of measuring chamber More than 5000 analyses per bottle of reagent Free selectable limit values in the range of reagent Alarm in case of lack of reagent / BOB-functionality Graphic display (illuminated) Various languages Analysis start: o Automatically by time interval o Suppressing of analysis via current switch o Via external controller 4 potential free outputs: o Exceedance of limit value 1 o Exceedance of limit value 2 alternatively lack of reagent o Malfunction of device o Analysis active (e.g.: valve of a sample cooler) 2 contact inputs for external controller or current switch Article name Article No. Voltage Memo Sycon 2800 Analyser on wall mounting plate V Sycon 2800 Analyser on wall mounting plate V Sycon 2501/2502/2800 housing Maintenance set Article name Article No. Memo Maintenance set for Sycon Pressure reducing strainer for inlet pressure > 4 bar Appropriate reagents, see page 13. Safety reliably produced. 6

7 Analysers for measuring and monitoring water ingredients Sycon 2800 Select determination of water ingredients (e.g.: EDTA concentration) Fully automated determination of water ingredients which is set by the chosen reagent Maintenance-free full colour sensor No tools needed for maintenance of measuring chamber More than 5000 analyses per bottle of reagent Free selectable limit values in the range of reagent Alarm in case of lack of reagent / BOB-functionality Graphic display (illuminated) Various languages Analysis start: o Automatically by time interval o Suppressing of analysis via current switch o Analysis via external controller 4 potential free outputs: o Exceedance of limit value 1 o Exceedance of limit value 2 alternatively lack of reagent o Malfunction of device o Analysis active (e.g.: valve of a sample cooler) 2 contact inputs for external controller or current switch Article name Article No. Voltage Memo Sycon 2800 Select Analyser on wall mounting plate V Sycon 2800 Select Analyser on wall mounting plate V Sycon 2501/2502/2800 housing Maintenance set Article name Article No. Memo Maintenance set for Sycon Pressure reducing strainer for inlet pressure > 4 bar Appropriate reagents, see page 13. 7

8 Accessories for analysers Sycon 2500 (A) / 2501 (A) / 2502 / 2800 / 3000 (B) Cleaning supplies Sycon Clean Cleaning set for acrylic measuring chambers FIT 3000 Cleaning fluid for acrylic measuring chambers (Cleaning fluid FIT 3000, 5 pairs of gloves, 2 brushes, funnel, box, instruction) Article name Article No. Memo Sycon Clean FIT 3000 (1000 ml) Maintenance sets Sycon 2500 / 2501 /2502 Article name Article No. Memo Maintenance set for Sycon 2500 / 2501 / Pressure reducing strainer for inlet pressure > 4 bar Sycon 2800 Article name Article No. Memo Maintenance set for Sycon Pressure reducing strainer for inlet pressure > 4 bar Sycon 3000 Article name Article No. Memo Maintenance set 01 for Sycon 3000 (all replacement hoses 3 x) Maintenance set 06 for Sycon 3000 for ½ year of operation (hoses, seals, bearings, wire, connectors) Maintenance set 24 for Sycon 3000 for 2 years of operation (4 x maintenance set 06 plus plugs and additional seals) (A) The Sycon 2500 and 2501 are discontinued analysis devices which are replaced by the Sycon (B) The Sycon 3000 is a discontinued analysis device which is replaced by the Sycon Safety reliably produced. 8

9 Controller for ion exchanger and filtration plants HAcon 7000 Controller unit used for backwashing filter systems or iron exchange resign in conjunction with pilot distributors or remote control valves Real-time clock, backed with lithium cell against voltage failure Storage of the last 10 regeneration points in time Timed controlled or via switch / analyser Regeneration release: o Points in time o Time intervals o external (differential pressure) or by hand Connections: o 2 remote control valves (pilot distributor) o 2 service valves o 1 programmable output o 2 programmable inputs o external (differential pressure) or by hand Article name Article No. Voltage Memo HAcon V HAcon V HAcon V HAcon /24 V HAcon 8000 Controller unit used for backwashing filter systems or iron exchange resign in conjunction with pilot distributors or remote control valves functional range extended by an additional output compared to the HAcon 7000 Real-time clock, backed with lithium cell against voltage failure Storage of the last 10 regeneration points in time Timed controlled or via switch / analyser Regeneration release: o Points in time o Time intervals o external (differential pressure) or by hand Connections: o 2 remote control valves (pilot distributor) o 2 service valves o 2 programmable output o 2 programmable inputs o external (differential pressure) or by hand Article name Article No. Voltage Memo HAcon V HAcon V HAcon V HAcon /24 V 9

10 Pilot distributors PVcon 5000 Controller for ion-exchanger and filtration plants Operation mode adjustable for ion exchanger or filter system Control in pulse or alternating operation Synchronisation switch included Control medium air or water Output of position to a current interface ( ma) 6 relays for indication of valves states (replaces the add-on programs of previous models) Rotary valve made of stainless steel Article name Membrane valve Article No. Voltage Memo PVcon 5000 pressure-less open V PVcon 5000 pressure-less open V PVcon 5000 pressure-less closed V PVcon 5000 pressure-less closed V PVcon 5000 Dual without spring reset V PVcon 5000 Dual without spring reset V PVcon 7000 Controller for ion-exchanger and filtration plants - functional range extended by an integrated control compared to the PVcon 5000 Operation mode adjustable for ion exchanger or filter system adjustable Volume, time or externally controlled triggering programmable Synchronisation switch included Start of regeneration programmable by analyser or via input contact Output of position to a current interface ( ma) 6 relays for indication of valves states (replaces the add-on program of previous models) Rotary valve made of stainless steel Article name Membrane valve Article No. Voltage Memo PVcon 7000 pressure-less open V PVcon 7000 pressure-less open V PVcon 7000 pressure-less closed V PVcon 7000 pressure-less closed V Safety reliably produced. 10

11 Cooler Sample coolers Suitable for abstraction of water samples in the boiler house Cooling water input 8 mm Cooling water output ½ external thread Sample water input 8 mm Sample water output 8 mm Material stainless steel , electro-polished Rated pressure 8 bar Cooling coil 16 bar AC 100 AC 400 HWV 100 KWV 150 HWV 400 KWV 400 Available in 2 sizes with or without hot and cold water valves Article name Article No. Memo Sample cooler Type AC 100 without valves Corpus: 100 mm x 225 mm, Cooling coil: 2,6 m x 8 mm Sample cooler Type AC 100 with hot and cold water valves Corpus: 100 mm x 225 mm, Cooling coil: 2,6 m x 8 mm Hot water valve Type HWV 100 for sample cooler AC 100 Fine adjustment valve made out of brass, PN 50 bar, 100 C Cold water valve Type KWV 150 for sample cooler AC 100 ¼" ball valve nickel plated brass with fittings for 8 mm tube Sample cooler Type AC 400 without valves Corpus: 100 mm x 448 mm, Cooling coil: 5 m x 8 mm Sample cooler Type AC 400 with hot and cold water valves Corpus: 100 mm x 448 mm, Cooling coil: 5 m x 8 mm Hot water valve Type HWV 400 for sample cooler AC 400 PN 200 bar, 250 C, with fittings for 8 mm tube

12 Cooler Pre-coolers Cooling of flow rate / heat exchanger (e.g.: in connection with analysis devices) Connectors 8 mm for squeezing fitting Material stainless steel , electro-polished Rated pressure of coil 16 bar Corpus 8 bar PC 200 PC 400 Available in 2 sizes Article name Article No. Memo Pre-Cooler Type PC 200 Corpus: 100 mm x 225 mm, Cooling coil: 2,6 m x 8 mm Pre-Cooler Type PC 400 Corpus: 100 mm x 448 mm, Cooling coil: 5 m x 8 mm Safety reliably produced. 12

13 Reagents for analysers Sycon 2500 (A) / 2501 (A) / 2502 / 2800 Residual / total hardness Shelf life 24 months For analysers Sycon 2500 / 2501 / 2502 / 2800 As single bottle of or as advantage pack with 4 x Article name Single bottle Advantage pack Reagent H25-0,02 Reagent H25-0,05 Reagent H25-0,1 Reagent H25-0,2 Reagent H25-0,3 Reagent H25-0,5 Reagent H25-1 Reagent H25-2 Reagent H25-3 Reagent H25-5 Reagent H x x x x x x x x x x x Limit value Sycon 250x 0,02 dh 0,36 ppm 0,036 f 0,025 e 0,05 dh 0,9 ppm 0,089 f 0,063 e 0,1 dh 1,8 ppm 0,18 f 0,13 e 0,2 dh 3,6 ppm 0,36 f 0,25 e 0,3 dh 5,3 ppm 0,53 f 0,38 e 0,5 dh 8,9 ppm 0,89 f 0,63 e 1 dh 17,8 ppm 1,78 f 1,25 e 2 dh 35,6 ppm 3,56 f 2,5 e 3 dh 53,4 ppm 5,34 f 3,76 e 5 dh 89 ppm 8,9 f 6,3 e 10 dh 178 ppm 17,8 f 12,5 e Measuring range Sycon ,02 0,12 dh 0,36 2,13 ppm 0,036 0,213 f 0,025 0,150 e 0,02 0,2 dh 0,36 3,56 ppm 0,036 0,36 f 0,025 0,25 e 0,03 0,3 dh 0,543 5,43 ppm 0,054 0,54 f 0,038 0,37 e 0,06 0,6 dh 1,1 10,6 ppm 0,11 1,06 f 0,08 0,75 e 0,09 0,9 dh 1,6 16,0 ppm 0,16 1,60 f 0,12 1,12 e 0,15 1,5 dh 2,7 26,7 ppm 0,27 2,67 f 0,19 1,87 e 0,3 3 dh 5,34 53,4 ppm 0,54 5,34 f 0,38 3,75 e 0,6 6 dh 10,7 106 ppm 1,07 10,6 f 0,76 7,51 e 0,9 9 dh 16,0 160 ppm 1,61 16,0 f 1,13 11,2 e 1,5 15 dh 26,7 267 ppm 2,67 26,7 f 1,88 18,8 e 3 30 dh 53,4 534 ppm 5,34 53,4 f 3,76 37,6 e Memo (A) The Sycon 2500 and 2501 are discontinued analysis devices which are replaced by the Sycon

14 Reagents for analysers Sycon 2500 (A) / 2501 (A) / 2502 / 2800 Carbonate hardness Shelf-life 24 months For analysers Sycon 2500 / 2501 / 2502 / 2800 Article name Single bottle Advantage pack Reagent C25 1 Reagent C25 1,5 Reagent C25 2 Reagent C x x x x Limit value Sycon 250x 1 dh 17,8 ppm CaCO3 1,78 f 1,25 e 1,5 dh 26,7 ppm CaCO3 2,67 f 1,88 e 2 dh 35,6 ppm CaCO3 3,56 f 2,5 e 3 dh 53,4 ppm CaCO3 5,34 f 3,76 e Measuring range Sycon ,3 3 dh 5,34 53,4 ppm 0,54 5,34 f 0,38 3,75 e 0,45 4,5 dh 8,0 80,1 ppm 0,8 8,0 f 0,56 5,6 e 0,6 6 dh 10,7 106 ppm 1,07 10,6 f 0,76 7,51 e 0,9 9 dh 16,0 160 ppm 1,61 16,0 f 1,13 11,2 e Memo Iron content Shelf-life 24 months For analysers Sycon 2500 Fe / 2501 Fe Article name Reagent Fe LRS Reagent Fe HRS Single bottle Limit value Sycon 2500 Fe / Sycon 2501 Fe 0,03 / 0,05 / 0,1 / 0,2 / 0,3 / 0,4 / 0,5 / 0,6 mg/l 0,3 / 0,5 / 1,0 / 2,0 / 3,0 / 4,0 / 5,0 / 6,0 mg/l Memo EDTA concentration Shelf-life 12 months For analyser Sycon 2800 Select Article name Single bottle Measuring range Memo Reagent E ppm (A) The Sycon 2500 and 2501 are discontinued analysis devices which are replaced by the Sycon Safety reliably produced. 14

15 Reagents for analyser Sycon 3000 (A) Residual / total hardness Shelf-life 24 months For analyser Sycon 3000 H Article name Single bottle Advantage pack Measuring range Memo 0,02 0,30 dh Reagent HA 0, ,36 5,34 ppm 4 x 0,04 0,53 f 0,03 0,37 e Reagent HA 1,2 Reagent HA 3 Reagent HA 30 Reagent HA x x x x 0,06 1,20 dh 1,07 21,4 ppm 0,11 2,13 f 0,08 1,50 e 0,15 3,00 dh 2,67 53,4 ppm 0,27 5,34 f 0,19 3,76 e 1,5 30,0 dh 26,7 534 ppm 2,67 53,4 f 1,88 37,6 e 3,0 60,0 dh 53, ppm 5,34 106,8 f 3,76 75,2 e Carbonate hardness Shelf-life 24 months For analyser Sycon 3000 C Article name Single bottle Measuring range Memo 0,15 3,00 dh Reagent CA ,67 53,4 ppm 0,27 5,34 f 0,19 3,76 e Reagent CA 9 Reagent CA ,45 9,00 dh 8,0 160 ppm 0,8 16 f 0,56 11,3 e 1,5 30,0 dh 26,7 534,00 ppm 2,67 53,4 f 1,88 37,6 e Iron content Shelf-life 24 months For analyser Sycon 3000 Fe Article name Single bottle Measuring range Memo Reagent FE ml 0,04 4 mg/l Fe (A) The Sycon 3000 is a discontinued analysis device which is replaced by the Sycon 2800 resp. by the Sycon 2800 Select. 15

16 Reagents (A) for analysers Testomat-FG / -F-BOB / 808 (company Heyl) Residual / total hardness Shelf-life 24 months Refill package Article name (compatible with product) Reagent HG 0,02 (Heyl Type 300) Reagent HG 0,05 (Heyl Type 300S) Reagent HG 0,1 (Heyl Type 301) Reagent HG 0,2 (Heyl Type 302) Reagent HG 0,3 (Heyl Type 303) Reagent HG 0,5 (Heyl Type 305) Reagent HG 1 (Heyl Type 310) Reagent HG 2 (Heyl Type 320) Reagent HG 3 (Heyl Type 330) Reagent HG 5 Reagent HG 10 Article No. Content Limit value Memo ml 0,02 dh ,36 ppm 0,036 f x 0,025 e ml 0,05 dh ,9 ppm 0,089 f x 0,063 e ml 0,1 dh ,8 ppm 0,18 f x 0,13 e ml 0,2 dh ,6 ppm 0,53 f x 0,38 e ml 0,3 dh ,3 ppm 0,53 f x 0,38 e ml 0,5 dh ,9 ppm 0,89 f x 0,63 e ml 1 dh ,8 ppm 1,78 f x 1,25 e ml 2 dh ,6 ppm 3,56 f x 2,5 e ml 3 dh ,4 ppm 5,34 f x 3,76 e ml 5 dh ppm 0,89 f x 6,3 e ml 10 dh ppm 17,8 f x 12,5 e (A) These reagents are products of RLS Wacon, which are compatible with mentioned devices of the company Heyl. Safety reliably produced. 16

17 Reagents (A) for analysers Testomat-C-BOB (company Heyl) Carbonate hardness Shelf-life 24 months Refill package Article name (compatible with product) Reagent HC 1 (Heyl Type C10) Reagent HC 1,5 (Heyl Type C15) Reagent HC 2 (Heyl Type C20) Reagent HC 3 (Heyl Type C30) Reagent HC 4 (Heyl Type C40) Single bottle Limit value 1 dh 17,8 ppm 1,78 f 1,25 e 1,5 dh 26,7 ppm 2,67 f 1,87 e 2 dh 35,6 ppm 3,56 f 2,5 e 3 dh 53,4 ppm 5,34 f 3,76 e 4 dh 71,2 ppm 7,12 f 5,0 e Memo Minus m-value Shelf-life 24 months Refill package Article name (compatible with product) Reagent HM 0,1 (Heyl Type M1) Reagent HM 0,3 (Heyl Type M3) Reagent HM 0,5 (Heyl Type M5) Single bottle Limit value Memo ,1 mmol/l 0,3 mmol/l 0,5 mmol/l (A) These reagents are products of RLS Wacon, which are compatible with mentioned devices of the company Heyl. 17

18 Reagents (A) for analysers Testomat 2000 / ECO (company Heyl) Residual / total hardness Shelf-life 12 months Bottle suitable for Testomat 2000 and ECO (analysers of the company Heyl) No decanting required Article name (compatible with product Reagent HT 0,5 (Heyl Type TH 2005) Reagent HT 2,5 (Heyl Type TH 2025) Reagent HT 10 (Heyl Type TH 2100) Reagent HT 25 (Heyl Type TH 2250) Single bottle Advantage pack Measuring range Memo x x x x 0,05 0,5 dh 0,89 8,9 ppm 0,089 0,89 f 0,063 0,63 e 0,25 2,5 dh 4,45 44,5 ppm 0,45 4,45 f 0,31 3,13 e 1,0 10 dh 17,8 178 ppm 1,78 17,8 f 1,25 12,5 e 2,5 25 dh 44,5 445 ppm 4,45 44,5 f 3,13 31,3 e Carbonate hardness Shelf-life 12 months Bottle suitable for Testomat 2000 and ECO (analysers of the company Heyl) No decanting required Article name (compatible with product) Reagent CT 5 (Heyl Type TC 2050) Reagent CT 10 (Heyl Type TC 2100) Single bottle Advantage pack Measuring range Memo x x 0,5 5 dh 8,9 89 ppm 0,89 8,9 f 0,63 6,3 e 1,0 20 dh 17,8 356 ppm 1,78 35,6 f 1,25 25,0 e (A) These reagents are products of RLS Wacon, which are compatible with mentioned devices of the company Heyl. Safety reliably produced. 18

19 Test kits for water analysis based on limit monitoring method For a fast and well-priced monitoring of ion exchangers Limit monitoring method: By adding one drop of reagent you determine whether the water hardness is above or below the limit value. Packing variants: Hinged lid box: Plastic box (103 x 91 x 36 mm 3 ) Folded box (FA): Cardboard box (65 x 45 x 25 mm 3 ) Refill package (NA): Reagents in plastic bag Residual hardness Number of analyses: 250 Duration of analysis: 1 min Description: complexometric titration, 1 reagent Limit value: 0,05 dh RG Hinged lid box RG 5 FA Folded box RG 5 NA Refill package Limit value: 0,1 dh RG Hinged lid box RG 10 FA Folded box RG 10 NA Refill package Limit value: 0,25 dh RG Hinged lid box RG 25 FA Folded box RG 25 NA Refill package Limit value: 0,5 dh RG Hinged lid box RG 50 FA Folded box RG 50 NA Refill package Limit value: 1,0 dh RG Hinged lid box RG 100 FA Folded box RG 100 NA Refill package 19

20 Test kits for water analysis based on titration method Titration method: The reagent is added dropwise to the sample. The measured value is determined by simply counting the drops until the colour changes. Packing variants: Hinged lid box: Plastic box (103 x 91 x 36 mm 3 ) Folded box (FA): Cardboard box (65 x 45 x 25 mm 3 ) Refill package (NA): Reagents in plastic bag Total hardness (1 reagent) Duration of analysis: Description: 1 min complexometric titration Measured value per drop: 0,1 / 0,05 dh (A) GR Hinged lid box GR 10 NA Refill package Number of analyses: 100 at 1 dh Measured value per drop: 0,5 / 0,25 dh (A) GR Hinged lid box GR 50 NA Refill package Number of analyses: 100 at 5 dh Measured value per drop: 1,0 / 0,5 dh (A) GH Hinged lid box GH 100 FA Folded box GH 100 NA Refill package Number of analyses: 100 at 10 dh Total hardness (1 reagent, 1 titration solution) Duration of analysis: Description: 1 min complexometric titration Measured value per drop: 1,0 / 0,5 dh (A) GHT Hinged lid box GHT 100 NA Refill package GHT 100 IN Refill package (reagent solution) GHT 100 TI Refill package (titration solution) Number of analyses: 100 at 10 dh (A) Given value refers to double amount of sample water. Safety reliably produced. 20

21 Test kits for water analysis based on titration method Carbonate hardness (2 reagents) Number of analyses: Duration of analysis: Description: 100 at 5 and 10 dh 1 min Acid-base-titration Measured value per drop: 0,5 / 0,25 dh (A) CH Hinged lid box CH 05 NA Refill package Measured value per drop: 1,0 / 0,5 dh (A) CH Hinged lid box CH 10 FA Folded box CH 10 NA Refill package Calcium (3 reagents) Number of analyses: 100 Duration of analysis: 1 min Description: complexometric titration Measured value per drop: 1,0 dh (A) Calcium Hinged lid box Calcium NA Refill package Chloride (3 reagents) Number of analyses: 100 Duration of analysis: 3 min Description: mercurimetric titration Measured value per drop: 5 mg/l Cl - / drop, 25 mg/l Cl - (A) Chloride Hinged lid box Chloride NA Refill package Chloride AB Refill package (reagent A + B) Chloride TI Refill package (titration solution) Carbonic acid (2 reagents) Number of analyses: 100 Duration of analysis: 1 min Description: Acid-base-titration Measured value per drop: 1 mg/l CO2 Carbonic acid Hinged lid box Carbonic acid 1 NA Refill package 21

22 Test kits for water analysis based on titration method Measured value per drop: 10 mg/l CO2, 5 mg/l CO2 Carbonic acid Hinged lid box Carbonic acid 10 NA Refill package Sulfate (2 reagents, 1 ion exchanger) Number of analyses: 30 Duration of analysis: 2 min Description: Precipitation-titration Measured value per drop: 10 mg/l SO (A), 5 mg/l SO4 Sulfate Hinged lid box Sulfate 10 NA Refill package Sulfate IN Refill package (reagent) Sulfate IA Refill package (ion exchanger) Sulfate TI Refill package (titration solution) Sulfate AT Activator for Sulfate test (250 ml) Measured value per drop: 20 mg/l SO (A), 10 mg/l SO4 Sulfate Hinged lid box Sulfate 20 NA Refill package Sulfate TI Refill package (titration solution) Sulfite (3 reagents) Number of analyses: 100 Duration of analysis: 1 min Description: Jodometric Measured value per drop: 5 mg/l SO3 2-, 2,5 mg/l 2- (A) SO3 Sulfite Hinged lid box Sulfite NA Refill package Sulfite A + B Refill package (reagents A + B) Sulfite TI Refill package (titration solution) PM-value (3 reagents) Number of analyses: 100 Duration of analysis: 1 min Description: Acid-base-titration Measured value per drop: 0,5 (0,25) mmol/l (A) PM-value Hinged lid box PM-value NA Refill package (A) Given value refers to double amount of sample water. Safety reliably produced. 22

23 Test kits for water analysis based on colorimetric method Colorimetric method: The measuring results are determined by comparison with a 6 colour fields chart. Packing variants: Hinged lid box: Plastic box (103 x 91 x 36 mm 3 ) Folded box (FA): Cardboard box (65 x 45 x 25 mm 3 ) Refill package (NA): Reagents in plastic bag Aluminium (0,05 2 mg/l Al) Number of analyses: 150 Colour values: 0,05 mg/l Al 0,1 mg/l Al Duration of analysis: 8 min 0,25 mg/l Al 0,5 mg/l Al Description: Chromazurol S, 3 reagents 0,75 mg/l Al 2,0 mg/l Al Aluminium Hinged lid box Aluminium NA Refill package Chlorine LR (0,05 1,0 mg/l Cl2) Number of analyses: 150 Colour values: 0,05 mg/l Cl2 0,1 mg/l Cl2 Duration of analysis: 1 min 0,25 mg/l Cl2 0,5 mg/l Cl2 Description: DPD, 3 reagents (free and 0,75 mg/l Cl2 1,0 mg/l Cl2 bound) Chloride LR Hinged lid box Chloride LR NA Refill package Chlorine dioxide (0,05 0,5 mg/l Cl2) Number of analyses: 140 Colour values: 0,05 mg/l ClO2 0,1 mg/l ClO2 Duration of analysis: 1 min 0,2 mg/l ClO2 0,3 mg/l ClO2 Description: DPD, 2 reagents (Chlorine 0,4 mg/l ClO2 0,5 mg/l ClO2 dioxide + chlorine) Chlordioxid Hinged lid box Chlordioxid NA Refill package Chlorine / Chlorine dioxide (0,05 0,5 mg/l Cl2) Number of analyses: 150 Colour 0,05 mg/l Cl2/ClO2 0,1 mg/l Cl2/ClO2 Duration of analysis: 1 min values: 0,2 mg/l Cl2/ClO2 0,3 mg/l Cl2/ClO2 Description: DPD, 3 reagents (only chlorine 0,4 mg/l Cl2/ClO2 0,5 mg/l Cl2/ClO2 dioxide or chlorine dioxide + chlorine) Chloride / Chlordioxid Hinged lid box Chloride / Chlordioxid NA Refill package 23

24 Test kits for water analysis based on colorimetric method DEHA (0,05 1,0 mg/l DEHA) Number of analyses: 100 Colour 0,05 mg/l DEHA 0,1 mg/l DEHA Duration of analysis: 5 min values: 0,25 mg/l DEHA 0,5 mg/l DEHA Description: Ferrozine, 2 reagents 0,75 mg/l DEHA 1,0 mg/l DEHA DEHA Hinged lid box DEHA NA Refill package Iron LR (0,05 1,0 mg/l Fe) Number of analyses: 150 Colour 0,05 mg/l Fe 0,1 mg/l Fe Duration of analysis: 4 min values: 0,25 mg/l Fe 0,5 mg/l Fe Description: Ferrozine, 2 reagents 0,75 mg/l Fe 1,0 mg/l Fe Iron LR Hinged lid box Iron LR NA Refill package Iron LRS (0,01 0,5 mg/l Fe) Number of analyses: 100 Colour value: 0,01 mg/l Fe 0,03 mg/l Fe Duration of analysis: 5 min 0,06 mg/l Fe 0,1 mg/l Fe Description: Ferrozine, 1 reagent 0,2 mg/l Fe 0,5 mg/l Fe Iron LRS Hinged lid box Iron LRS NA Refill package Iron HR (0,25 10 mg/l Fe) Number of analyses: 150 Colour 0,25 mg/l Fe 0,5 mg/l Fe Duration of analysis: 3 min values: 1,0 mg/l Fe 2,5 mg/l Fe Description: O-phenanthroline, 2 reagents 5,0 mg/l Fe 10,0 mg/l Fe Iron HR Hinged lid box Iron HR NA Refill package Iron HRS (0,2 10 mg/l Fe) Number of analyses: 150 Colour 0,2 mg/l Fe 0,5 mg/l Fe Duration of analysis: 3 min values: 1,0 mg/l Fe 2,5 mg/l Fe Description: O-phenanthroline, 1 reagent 5,0 mg/l Fe 10,0 mg/l Fe Iron HRS Hinged lid box Iron HRS NA Refill package Safety reliably produced. 24

25 Test kits for water analysis based on colorimetric method Manganese (0,03 1,0 mg/l Mn) Number of analyses: 100 Colour 0,03 mg/l Mn 0,05 mg/l Mn Duration of analysis: 10 min value: 0,1 mg/l Mn 0,25 mg/l Mn Description: Formaldoxime, 0,5 mg/l Mn 1,0 mg/l Mn 3 reagents Mangan Hinged lid box Mangan NA Refill package Nitrate (1 50 mg/l NO3 - ) Number of analyses: 200 Colour 1 mg/l NO3-10 mg/l NO3- Duration of analysis: 6 min value: 20 mg/l NO3-30 mg/l NO3- Description: NED, 2 reagents 40 mg/l NO3-50 mg/l NO3- Nitrate Hinged lid box Nitrate NA Refill package ph 2-5 (2 5 ph) Number of analyses: 300 Colour ph 2,0 Duration of analysis: 1 min value: ph 3,5 Description: Mixed reagent, 1 reagent ph 4,5 ph Hinged lid box ph 2-5 NA Refill package ph 3,0 ph 4,0 ph 5,0 ph 5-8 (5 8 ph) Number of analyses: 300 Colour ph 5,0 Duration of analysis: 1 min value: ph 6,5 Description: Mixed reagent, 1 reagent ph 7,5 ph Hinged lid box ph 5-8 NA Refill package ph 6,0 ph 7,0 ph 8,0 ph 8-12 (8 12 ph) Number of analyses: 300 Colour ph 8,0 Duration of analysis: 1 min value: ph 9,0 Description: Mixed reagent, 1 reagent ph 11,0 ph Hinged lid box ph 8-12 NA Refill package ph 8,5 ph 10,0 ph 12,0 25

26 Test kits for water analysis based on colorimetric method ph- Chlorine (free) Number of analyses: 50 Duration of analysis: 1 min Description: DPD / phenolred, 1 reagent / 2 reagents Colour value: 6,8-7,4-8,0 ph Number of analyses: 50 Colour 0,1-0,5-1,0 mg/l Cl2 Duration of analysis: 1 min value: Description: 1 reagent (ph bath), 2 reagents (chlorine A + B) ph-chlorine (free) Hinged lid box ph-chlorine (free) NA Refill package (3 reagents) ph-chlorine Refill package (1 reagent) ph-bath NA ph-chlorine Chlorine A+B NA Refill package (reagents A + B) Phosphate LR (0,25 10 mg/l PO4 3- ) Number of analyses: 200 Colour 0,25 mg/l PO4 3-0,5 mg/l PO4 3- Duration of analysis: 5 min value: 1,0 mg/l PO4 3-2,5 mg/l PO4 3- Description: Molybdate, 2 reagents 5,0 mg/l PO4 3-10,0 mg/l PO4 3- Phosphate LR Hinged lid box Phosphate LR NA Refill package Phosphate HR (2,5 100 mg/l PO4 3- ) Number of analyses: 100 Colour 2,5 mg/l PO4 3-5,0 mg/l PO4 3- Duration of analysis: 5 min value: 10,0 mg/l PO4 3-25,0 mg/l PO4 3- Description: Molybdate, vanadate, 1 reagent 50,0 mg/l PO ,0 mg/l PO4 3- Phosphate HR Hinged lid box Phosphate HR NA Refill package Silicate (0,25 10 mg/l SiO2) Number of analyses: 100 Colour 0,25 mg/l SiO2 0,5 mg/l SiO2 Duration of analysis: 8 min value: 1,0 mg/l SiO2 2,5 mg/l SiO2 Description: Molybdate, 3 reagents 5,0 mg/l SiO2 10,0 mg/l SiO2 Silicate Hinged lid box Silicate NA Refill package Safety reliably produced. 26

27 Test kits for water analysis based on colorimetric method Sulfide (0,05 1,0 mg/l S 2- ) Number of analyses: 100 Colour 0,05 mg/l S 2-0,1 mg/l S 2- Duration of analysis: 7 min value: 0,25 mg/l S 2-0,5 mg/l S 2- Description: DPD, 2 reagents 0,75 mg/l S 2-1,0 mg/l S 2- Sulfide Hinged lid box Sulfide NA Refill package Sulfite (0,5 20 mg/l SO3 2- ) Number of analyses: 150 Colour 0,5 mg/l SO3 2-1,0 mg/l SO3 2- Duration of analysis: 3 min value: 2,5 mg/l SO3 2-5,0 mg/l SO3 2- Description: Thiobenzoeacid, 2 reagents 10,0 mg/l SO3 2-20,0 mg/l SO3 2- Sulfite Hinged lid box Sulfite NA Refill package 27

28

29 How to order from us: RLS Wacon GmbH Eduard-Ahlborn-Str Hildesheim Germany by phone: by info@rls-wacon.de using the enclosed form by Fax: by mail: RLS Wacon GmbH Eduard-Ahlborn-Str Hildesheim Germany MY ORDER Customer (ID): I hereby order the following articles: Article name Article No. Quantity Price Date / signature and company stamp

30

31 Imprint: RLS Wacon GmbH Eduard-Ahlborn-Str. 1 D Hildesheim Phone: +49 (0) 5121 / Fax: +49 (0) 5121 / info@rls-wacon.de Managing Director: Dr. Claudia Rudolph, Dr. Sascha Matern Register court: District Court of Hildesheim Registration no.: HRB VAT ID: DE Picture on the front and back: Vitali Vidnevski (employee of RLS Wacon GmbH), 2015 Subject to modifications and errors Safety reliably produced.

32 Safety reliably produced.