DIPLOMA IN ENGINEERING I YEAR
|
|
|
- Ella Lynch
- 5 years ago
- Views:
Transcription
1 GOVERNMENT OF TAMILNADU DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN ENGINEERING I YEAR SEMESTER SYSTEM L - SCHEME I SEMESTER ENGINEERING PHYSICS I PRACTICAL CURRICULUM DEVELOPMENT CENTER
2 STATE BOARD OF TECHNICAL EDUCATION & TRAINING, TAMILNADU DIPLOMA IN ENGINEERING - SYLLABUS L-SCHEME (Implements from the Academic Year on wards) Course Name : Subject Code : Semester : I Semester All Branches of Diploma in Engineering and Technology and Special Programmes except DMOP, HMCT and Film & TV Subject Title : ENGINEERING PHYSICS I PRACTICAL TEACHING AND SCHEME OF EXAMINATION : Subject ENGINEERING PHYSICS I PRACTICAL No of weeks per semester: 16 weeks Instructions Examination Hours /Semester Marks Hours /Week Internal Assessment Board Examination Total Duration 2 Hrs 32 Hrs Hrs RATIONALE: In Diploma level Engineering education skill development plays a vital role. The skill development can be achieved by on hand experience in handling various instruments, apparatus and equipment. This is accomplished by doing engineering related experiments in practical classes in various laboratories. GUIDELINES: All the Eight experiments given in the list of experiments should be completed and given for the end semester practical examination. In order to develop best skills in handling Instruments/Equipment and taking readings in the practical classes, every two students should be provided with a separate experimental setup for doing experiments in the laboratory. The external examiners are requested to ensure that a single experimental question should not be given to more than four students while admitting a batch of 30 students during Board Examinations. CDC- DOTE ENGINEERING PHYSICS-I PRACTICAL Page 2 of 6
3 ALLOCATION OF MARKS Formula with explanation Figure / Circuit diagram with parts Tabulation with proper units Observation (including taking readings) Calculation Result 10 marks 05 marks 10 marks 35 marks 10 marks 05 marks Total 75 Marks CDC- DOTE ENGINEERING PHYSICS-I PRACTICAL Page 3 of 6
4 FIRST SEMESTER ENGINEERING PHYSICS - I PRACTICAL LIST OF EXPERIMENTS WITH OBJECTIVES: 1. MICROMETER (SCREW GAUGE). To measure the thickness of the given irregular glass plate using micrometer. To Determine the area of the glass plate using a graph sheet and to calculate the volume of the glass plate. 2. VERNIER CALIPERS. To measure the length and diameter of the given solid cylinder using vernier calipers and to calculate the volume of the solid cylinder. 3. CONCURRENT FORCES. To verify the parallelogram law of forces and Lami s theorem. 4. POISEUILLE S METHOD. To determine the coefficient of viscosity of water by capillary flow method, using Graduated burette without stopper (variable pressure head arrangement ). 5. STOKES METHOD. To determine the coefficient of viscosity of a high viscous liquid. 6. SURFACE TENSION. To determine the surface tension of water by capillary rise method. 7. SONOMETER. To determine the frequency of the given tuning fork. 8. DEFLECTION MAGNETOMETER To compare the magnetic moments of the two bar magnets using deflection Magnetometer in Tan A position, by equal distance method. CDC- DOTE ENGINEERING PHYSICS-I PRACTICAL Page 4 of 6
5 FIRST SEMESTER ENGINEERING PHYSICS - I PRACTICAL LIST OF EQUIPMENT 1. MICROMETER (SCREW GAUGE). Screw gauge, graph sheet and irregular glass plate. 2. VERNIER CALIPERS. Vernier Calipers and Solid Cylinder 3. CONCURRENT FORCES. Vertical drawing board, two Z pulleys, three sets of slotted weights (5 x 50g) and twine thread. 4. POISEUILLE S METHOD. Burette stand, graduated burette without stopper, rubber tube, capillary Tube, beaker, digital stop watch and funnel. 5. STOKES METHOD. Stokes Apparatus, high viscous liquid (Castrol oil), glass beads of Different radii, digital stop watch and screw gauge. 6. SURFACE TENSION. Beaker with water, capillary tube, iron stand with clamp, pointer, travelling microscope and hydro static bench. 7. SONOMETER. Sonometer, screw gauge, tuning fork, rubber hammer, slotted weight hanger set (5 x 0.5kg) and paper rider. 8. DEFLECTION MAGNETOMETER Deflection Magnetometer, meter scale and two bar magnets. CDC- DOTE ENGINEERING PHYSICS-I PRACTICAL Page 5 of 6
6 FIRST SEMESTER ENGINEERING PHYSICS - I PRACTICAL MODEL QUESTION PAPER 1. Measure the thickness of the given irregular glass plate using micrometer. Determine the area of the glass plate using a graph sheet and calculate the volume of the glass plate. 2. Measure the length and diameter of the given solid cylinder using vernier calipers and then calculate the volume of the solid cylinder. 3. Verify the parallelogram law of forces and Lami s theorem using concurrent forces. 4. Determine the coefficient of viscosity of water by capillary flow method, using graduated burette. 5. Determine the coefficient of viscosity of a high viscous liquid by Stokes method. 6. Determine the surface tension of water by capillary rise method. 7. Determine the frequency of the given tuning fork using sonometer. 8 Compare the magnetic moments of the two bar magnets using deflection magnetometer in Tan-A position, by equal distance method. CDC- DOTE ENGINEERING PHYSICS-I PRACTICAL Page 6 of 6
DIPLOMA IN ENGINEERING I YEAR II SEMESTER
GOVERNMENT OF TAMILNADU DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN ENGINEERING I YEAR SEMESTER SYSTEM L - SCHEME 2011-2012 II SEMESTER ENGINEERING CHEMISTRY II PRACTICAL CURRICULUM DEVELOPMENT CENTER
Government of Karnataka Department of Technical Education Board of Technical Examinations, Bengaluru
Government of Karnataka Department of Technical Education Board of Technical Examinations, Bengaluru Title :APPLIED SCIENCE LAB Code : 15SC04P Semester : I / II Group : Core Teaching Scheme in Hrs (L:T:P)
Candidate Number. General Certificate of Education Advanced Level Examination June 2010
Centre Number Surname Candidate Number For Examiner s Use Other Names Candidate Signature Examiner s Initials Physics (Specifications A and B) Unit 6 Section B General Certificate of Education Advanced
TEKS Physics, Beginning with School Year Correlation to CPO Science Link
TEKS Physics. (c) Knowledge and skills. (1) Scientific processes. The student conducts investigations, for at least 40% of instructional time, using safe, environmentally appropriate, and ethical practices.
No. Experiments Page No. 1 Use of Vernier Callipers 1. 2 Use of Micrometer screw gauge 5. 3 Use of Spherometer 9. 4 Parallelogram law of forces 12
No. Experiments Page No. 1 Use of Vernier Callipers 1 2 Use of Micrometer screw gauge 5 3 Use of Spherometer 9 4 Parallelogram law of forces 12 5 Coefficient of static friction 15 6 Determination of Resistance
For use with Comprehensive Secondary Physics
For use with 139 For use with Physics Secondary Form Two Physics : Term One WEEK 1 Magnetic and nonmagnetic materials identify magnetic and non-magnetic materials. Observing attraction and repulsion of
SECOND YEAR Experiments. FIRST YEAR Experiments
LIST OF EXPERIMENTS PRACTICAL PHYSICS 07-8 For the Higher Secondary Practical Examination, a minimum of experiments must be done and recorded. These include 0 first year experiments and second year experiments
7. PHYSICS (Code No. 042)
7. PHYSICS (Code No. 042) Senior Secondary stage of school education is a stage of transition from general education to discipline-based focus on curriculum. The present updated syllabus keeps in view
Science TEKS Verification
Science EKS Verification (1) Scientific processes. he student conducts investigations, for at least 40% of instructional time, using safe, environmentally appropriate, and ethical practices. hese investigations
VERIFICATION OF THE LAWS OF VIBRATION OF STRETCHED STRINGS
136 Experiment-367 F VERIFICATION OF THE LAWS OF VIBRATION OF STRETCHED STRINGS Jeethendra Kumar P K, Ajeya PadmaJeeth and Santhosh K KamalJeeth Instrumentation & Service Unit, No-610, Tata Nagar, Bengaluru-560092.
GENERAL PHYSICS (3) LABORATORY PHYS 203 LAB STUDENT MANUAL
Haifaa altoumah& Rabab Alfaraj By Haifaa altoumah& Rabab Alfaraj GENERAL PHYSICS (3) LABORATORY PHYS 203 LAB STUDENT MANUAL Name:-. ID# KING ABDULAZIZ UNIVERSITY PHYSICS DEPARMENT 1st semester 1430H Contents
Error? Relative error = Theory: g = 9.8 m/sec 2 Measured: g = 9.7 m/sec 2
Error? Theory: g = 9.8 m/sec 2 Measured: g = 9.7 m/sec 2 Relative error = Measurement Error? (how well do you know your measurement of g = 9.7 m/sec 2. Do you know it exactly 9.7 m/sec 2? ) 3 Accuracy
Chapter 112. Texas Essential Knowledge and Skills for Science Subchapter D. Other Science Courses
Chapter 112. Texas Essential Knowledge and Skills for Science Subchapter D. Other Science Courses Statutory Authority: The provisions of this Subchapter D issued under the Texas Education Code, 28.002,
Measurement of basic constants: length, weight and time
Measurement of basic constants: length, weight and time TEP Related topics Length, diameter, inside diameter thickness, curvature, vernier, weight resolution, time measurement. Principle Caliper gauges,
Unit 1. The Math of Chemistry
Unit 1 The Math of Chemistry Lab Safety Lab Safety http://www.flinnsci.com/teacher-resources/teacher-resource-videos/best-practices-for-teaching-chemistry/safety/laboratory-safety-challenge/ Laboratory
Internal Exam Marks. Marks
Course Name : 03 Years Diploma in Engineering Semester : First Subject Title : Engineering Physics-I Subject Code : 103/ 107 Teaching and Examination Scheme: Teaching Scheme L T P Full External. Exam Internal
Dr. Radhakrishnan A N Assistant Professor of Physics GPTC, Vechoochira
CONTENTS. Vernier Calipers. Screw Gauge. Simple Pendulum 7. Moment Bar 9. Convex Lens Appendix Vernier Calipers Exp. No: Date: Aim (i) To nd the volume of the given cylinder by measuring its length and
Experiment Instructions. Deformation of Frames
Experiment Instructions SE 0.20 Deformation of Frames Experiment Instructions This manual must be kept by the unit. Before operating the unit: - Read this manual. - All participants must be instructed
7. PHYSICS (Code No. 042)
7. PHYSICS (Code No. 042) Senior Secondary stage of school education is a stage of transition from general education to discipline-based focus on curriculum. The present updated syllabus keeps in view
THE SCREW GAUGE. AIM: To learn to use a Screw Gauge and hence use it to find the dimensions of various regular materials given.
EXPERIMENT NO: DATE: / / 0 THE SCREW GAUGE AIM: To learn to use a Screw Gauge and hence use it to find the dimensions of various regular materials given. APPARUTUS: Given a Screw Gauge, cylindrical glass
Amarillo ISD - Physics - Science Standards
Amarillo Independent School District follows the Texas Essential Knowledge and Skills (TEKS). All of AISD curriculum and documents and resources are aligned to the TEKS. The State of Texas State Board
PRACTICAL WORK BOOK HIGHER SECONDARY FIRST YEAR.
PRACTICAL WORK BOOK HIGHER SECONDARY FIRST YEAR,aw;gpay; PHYSICS PREPARED BY RAJENDRAN M,M.Sc., B.Ed., C.C.A., P.G. ASSISTANT IN PHYSICS, DEPARTMENT OF PHYSICS, SRM HIGHER SECONDARY SCHOOL, KAVERIYAMPOONDI,
PHYSICS PAPER 232/1 K.C.S.E 2001
PHYSICS PAPER 232/1 K.C.S.E 2001 1. Fig. 1 shows a burette partly filed with a liquid. The burette was initially full to the mark O. If the quantity of the liquid removed has a mass of 22g, determine the
Experiment 11. Moment of Inertia
Experiment Moment of nertia A rigid body composed of concentric disks is constrained to rotate about its axis of symmetry. The moment of inertia is found by two methods and results are compared. n first
Elementary charge and Millikan experiment Students worksheet
Tasks This experiment deals with the observation of charged oil droplets, which are accelerated between two capacitor plates.. Measure some rise and fall times of oil droplets at different voltages. Determine
Engineering Physics I Unit I. Part C (5 Mark questions and answers)
Engineering Physics I Unit I Part C (5 Mark questions and answers) 1. Write the conventions to be followed in writing S.I unit. The following conventions to be followed while writing the S.I. unit symbols
PHYSICS (SPECIFICATION A) Unit 10 The Synoptic Unit
Surname Centre Number Other Names Candidate Number Leave blank Candidate Signature General Certificate of Education June 2003 Advanced Level Examination PHYSICS (SPECIFICATION A) Unit 10 The Synoptic Unit
Engineering Mechanics Laboratory Manual
2011-2012 Engineering Mechanics Laboratory Manual M.H.SABOO SIDDIK COLLEGE OF ENGG. Prof.Shaikh Ibrahim Ismail Automobile Engg. Dept. M.H.SABOO SIDDIK COLLEGE OF ENGG. Engineering Mechanics 3 CONTENTS
Second Law. In this experiment you will verify the relationship between acceleration and force predicted by Newton s second law.
Second Law Objective In this experiment you will verify the relationship between acceleration and force predicted by Newton s second law. Apparatus Table clamp, Vertical rod, Right-angle clamp, Horizontal
Class XI Physics Syllabus One Paper Three Hours Max Marks: 70
Class XI Physics Syllabus 2013 One Paper Three Hours Max Marks: 70 Class XI Weightage Unit I Physical World & Measurement 03 Unit II Kinematics 10 Unit III Laws of Motion 10 Unit IV Work, Energy & Power
Physics. Practical 5: Density. Practical Objective. Content Objective. Apparatus. Your teacher may watch to see if you can:
The density of a substance is the mass of a unit volume of that substance. Almost all substances are most dense when they are solids and least dense when they are gases. The arrangement of particles can
UNIQUE SCIENCE ACADEMY
UNIQUE SCIENCE ACADEMY Test (Unit 1) Name :... Paper: Physics Date :... Class: C1A Time Allowed: Minutes Maximum Marks: 2 [Total 1 Marks] 1 Five identical steel balls are measured with a rule graduated
NAME:.ADM NO: SCHOOL..CANDIDATE S SIGNATURE 232/1 PHYSICS PAPER 1 TIME 2 HOURS
NAME:.ADM NO: SCHOOL..CANDIDATE S SIGNATURE DATE: EMBU NORTH COMMON EVALUATION EXAMINATION 2 ND TERM YEAR 2018 232/1 PHYSICS PAPER 1 TIME 2 HOURS INSTRUCTIONS TO CANDIDATE: (a) Write your name and admission
OSCILLATIONS OF A SPRING-MASS SYSTEM AND A TORSIONAL PENDULUM
EXPERIMENT Spring-Mass System and a Torsional Pendulum OSCILLATIONS OF A SPRING-MASS SYSTEM AND A TORSIONAL PENDULUM Structure.1 Introduction Objectives. Determination of Spring Constant Static Method
EXPERIMENT 1 Chemistry 110 LABORATORY SAFETY
EXPERIMENT 1 Chemistry 110 LABORATORY SAFETY MEASUREMENTS PURPOSE: The Purpose of this laboratory exercise is for the students to develop the skills of measuring length, volume, mass and temperature and
APPENDICES 121 The readings of a normal student in the lab Experiment No. 1: To find the volume of a cylinder using Vernier calipers. Observations and Calculations: Value of the smallest scale division
GAS LAWS. Boyle s Law: Investigating the dependence of Volume on Pressure (Temperature kept constant)
1 GAS LAWS Boyle s Law: Investigating the dependence of Volume on Pressure (Temperature kept constant) The diagram below shows the apparatus which gives a direct reading for both the volume and pressure
Amarillo ISD Science Curriculum
Amarillo Independent School District follows the Texas Essential Knowledge and Skills (TEKS). All of AISD curriculum and documents and resources are aligned to the TEKS. The State of Texas State Board
Millikan Oil Drop Experiment
Millikan Oil Drop Experiment Introduction The electronic charge, or electrical charge carried by an electron, is a fundamental constant in physics. During the years 1909 to 1913, R.A. Millikan used the
Varuvan Vadivelan. Institute of Technology LAB MANUAL. : 2013 : B.E. MECHANICAL ENGINEERING : III Year / V Semester. Regulation Branch Year & Semester
Varuvan Vadivelan Institute of Technology Dharmapuri 636 703 LAB MANUAL Regulation Branch Year & Semester : 2013 : B.E. MECHANICAL ENGINEERING : III Year / V Semester ME 6511 - DYNAMICS LABORATORY GENERAL
Mechanics Kit #MECHKT
Phone: 417.347.7431 Fax: 417.374.7442 service@gosciencecrazy.com 1747 North Deffer Drive Nixa, Missouri 65714 Mechanics Kit #MECHKT Introduction Warning: Mechanics refers broadly to the study of forces
hij Teacher Resource Bank GCE Physics A Sample AS ISA: Equilibrium of Forces Question Paper
hij Teacher Resource Bank GCE Physics A Sample AS ISA: Equilibrium of Forces Question Paper Copyright 2008 AQA and its licensors. All rights reserved. The Assessment and Qualifications Alliance (AQA) is
THE UNITED REPUBLIC OF TANZANIA MINISTRY OF EDUCATION AND VOCATIONAL TRAINING FORM TWO SECONDARY EDUCATION EXAMINATION, 2008.
THE UNITED REPUBLIC OF TANZANIA MINISTRY OF EDUCATION AND VOCATIONAL TRAINING FORM TWO SECONDARY EDUCATION EXAMINATION, 2008 0031 PHYSICS Time: 2 Hours 1. This paper consists of sections A, B and C. 2.
Measuring Viscosity. Advanced Higher Physics Investigation. Jakub Srsen SCN: Boroughmuir High School Center Number:
Measuring Viscosity Advanced Higher Physics Investigation Jakub Srsen SCN: 050950891 Boroughmuir High School Center Number: 0 09/02/2009 Contents Introduction 2 Summary 2 Underlying Physics 2 Procedures
Physics Spring 2006 Experiment 4. Centripetal Force. For a mass M in uniform circular motion with tangential speed v at radius R, the required
Centripetal Force I. Introduction. In this experiment you will study the centripetal force required for a mass in uniform circular motion. You will determine the centripetal forces required for different
The City School. O-Level Syllabus Break Up
The City School O-Level Syllabus Break Up Class: 9 Sept.14 to May 15 Note: The total number of active teaching weeks for AY 2014-15 is 30 (excluding revision and examination weeks): First term: 14 weeks
Physics 4A Lab 11: MOMENT OF INERTIA Parts List
Part Quantity Rotating cross-arm table 1 Physics 4A Lab 11: MOMENT OF INERTIA Parts List Large iron disk 1 Large iron ring 1 50 grams hanger 1 Weights 1 set Table clamp 1 1-meter long rod 1 Pulleys 2 Rght-angle
SECTION Question Maximum score Candidate s score
NAME..INDEXNo../ ADM. 232/1 PHYSIC S Paper 1 (THEORY) JULY/AUGUST 2014 2 Hours SUBUKIA SUB-COUNTY JOINT EXAMINATION KENYA EXAMINATION OF SECONDARY EDUCATION (K.C.S.E) INSTRUCTIONS TO CANDIDATES Student
Vector Addition INTRODUCTION THEORY
Vector Addition INTRODUCTION All measurable quantities may be classified either as vector quantities or as scalar quantities. Scalar quantities are described completely by a single number (with appropriate
Bundle at a Glance Physics 2015/16 Introduction: Scientific Investigation and Reasoning Skills (3 A/B days)
Introduction: Scientific Investigation and Reasoning Skills (3 A/B days) Physics Process TEKS: The student will 1A demonstrate safe practices during laboratory and field investigations. 1B demonstrate
Answer all the questions in this section in the spaces provided.
3.5 PHYSICS (232) 3.5.1 Physics Paper 1 (232/1) SECTION A (25 marks) Answer all the questions in this section in the spaces provided. 1 Figure 1 shows part of the main scale and vernier scale of a vernier
S.3 PHYSICS HOLIDAY WORK Where necessary assume the acceleration due to gravity, g 10ms. 1. 7. 13. 19. 25. 2. 8. 14. 20. 26. 3. 9. 15. 21. 27. 4. 10. 16. 22. 28. 5. 11. 17. 23. 29. 6. 12. 18. 24. 30. SECTION
1 Measure various dimensions of component using Vernier caliper and dial type vernier caliper. d 3 d 1
1 Measure various dimensions of component using Vernier caliper and dial type vernier caliper. 1. Note down the apparatus needed and draw component drawing and label parameters to measure. Vernier Caliper
INSTRUCTIONAL FOCUS DOCUMENT HS/Physics
Exemplar Lesson 01: Thermodynamics and Heat Transfer State Resources: RATIONALE: This unit bundles student expectations relating to how matter reacts with changing temperature, how thermal energy is controlled
ANALYSIS OF VOLUME AND DENSITY OF A SOLID MATERIAL AND ARCHIMEDES PRINCIPLE
EXPERIMENT 1 ANALYSIS OF VOLUME AND DENSITY OF A SOLID MATERIAL AND ARCHIMEDES PRINCIPLE Purpose : 1.)The goal of this laboratory is to measure the mass and the dimensions of solids and to determine their
6 The time taken for a pendulum to swing from the rest position X to its maximum displacement Y is 1.5 s. C 4.5s J93/112 I I I I I I I
TOPC 1 Physical Quantities and Units 1 1.1 Physical Quantities 5 Which of the following is measured using a micrometer? 1.2 S units 1.3 Prefies area length 1.5 Measurement of length and time current E
CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education PHYSICS 0625/01. Paper 1 Multiple Choice May/June 2003
MRIGE INTERNTIONL EXMINTIONS International General ertificate of Secondary Education PHYSIS 625/1 Paper 1 Multiple hoice May/June 23 dditional Materials: Multiple hoice nswer Sheet Soft clean eraser Soft
PORTMORE COMMUNITY COLLEGE
PORTMORE COMMUNITY COLLEGE ASSOCIATE DEGREE IN ENGINEERING TECHNOLOGY RESIT EXAMINATIONS SEMESTER 2 July 2012 COURSE NAME: Mechanical Engineering Science CODE: GROUP: ADET 1 DATE: July 3, 2012 TIME: DURATION:
Using Conductivity to Find an Equivalence Point
Experiment 25 PRE LAB DISCUSSION In this experiment, you will monitor conductivity during the reaction between sulfuric acid, and barium hydroxide in order to determine the equivalence point. From this
Rotational Inertia (approximately 2 hr) (11/23/15)
Inertia (approximately 2 hr) (11/23/15) Introduction In the case of linear motion, a non-zero net force will result in linear acceleration in accordance with Newton s 2 nd Law, F=ma. The moving object
Mechanics. Surface tension by the ring method (Du Nouy method) Mechanics of Liquids and Gaseous Bodies. What you need:
Mechanics of Liquids and Gaseous Bodies Mechanics Surface tension by the ring method (Du Nouy method) What you can learn about Surface energy Interface Surface tension Adhesion Critical point Eötvös equation
MANUAL ON ENGINEERING SCIENCE LAB II (2007)
MANUAL ON ENGINEERING SCIENCE LAB II (2007) TOPICS ENGINEERING PHYSICS PAGE NO VERNIER CALIPER 03 SCREW GAUGE 05 COMMON BALANCE 07 SIMPLE PENDULAM 09 HOOK S LAW 11 OHM S LAW 13 MOMENT BAR 15 CONCURRENT
ICSE Board Class IX Physics Paper 3
ICSE Board Class IX Physics Paper 3 Time: 2 hrs Total Marks: 80 General Instructions: 1. Answers to this paper must be written on the paper provided separately. 2. You will not be allowed to write during
Department of Physics. ( Al Ansar International School, Sharjah) ( ) Project Work Term 1. IGCSE Physics Grade 9. Students Name: Grade / Section:
Department of Physics ( Al Ansar International School, Sharjah) (2017-18) Project Work Term 1 IGCSE Physics Grade 9 Students Name: Grade / Section: Complete the answer sheet on page 2, and submit to your
ANNEXURE. :All branches of Diploma in Engineering and Technology and Special Programmes except HMCT and film & TV.
ANNEXURE STATE BOARD OF TECHNICAL EDUCATION & TRAINING, TAMILNADU DIPLOMA IN ENGINEERING / TECHNOLOGY SYLLABUS M-SCHEME (Implements from the Academic year 2015-2016 onwards) Course Name :All branches of
EXPERIMENTAL COMPETITION
Thursday, April 28 th, 2005 Before attempting to assemble your equipment, read the problem text completely! Please read this first: 1. The time available is 5 hours. 2. Use only the pen and equipments
Physics 116 Experiment 1. Introduction to Measurement and Error Analysis (PHY 115 and 117)
PHY116 Labbook Physics 116 Experiment 1 Introduction to Measurement and Error Analysis (PHY 115 and 117) Introduction In the sciences, measurement plays an important role. The accuracy of the measurement,
Cambridge International Examinations Cambridge International General Certificate of Secondary Education
Cambridge International Examinations Cambridge International General Certificate of Secondary Education *4000051718* PHYSICS 0625/61 Paper 6 Alternative to Practical May/June 2017 1 hour Candidates answer
DIVIDED SYLLABUS ( ) - CLASS XI PHYSICS (CODE 042) COURSE STRUCTURE APRIL
DIVIDED SYLLABUS (2015-16 ) - CLASS XI PHYSICS (CODE 042) COURSE STRUCTURE APRIL Unit I: Physical World and Measurement Physics Need for measurement: Units of measurement; systems of units; SI units, fundamental
Supply List. Physics. Released Glynlyon, Inc
N Supply List Physics 2012 Glynlyon, Inc Released 4-1-12 Table of Contents UNIT 1: KINEMATICS... 1 UNIT 2: DYNAMICS... 2 UNIT 3: WORK AND ENERGY... 2 UNIT 4: INTRODUCTION TO WAVES... 3 UNIT 5: LIGHT...
Stream line, turbulent flow and Viscosity of liquids - Poiseuille s Method
Stream line, turbulent flow and Viscosity of liquids - Poiseuille s Method Dr D. Arun Kumar Assistant Professor Department of Physical Sciences Bannari Amman Institute of Technology Sathyamangalam General
Chapter 9: Circular Motion
Text: Chapter 9 Think and Explain: 1-5, 7-9, 11 Think and Solve: --- Chapter 9: Circular Motion NAME: Vocabulary: rotation, revolution, axis, centripetal, centrifugal, tangential speed, Hertz, rpm, rotational
FORM 5 PHYSICS TIME: 2 hours
DIRECTORATE FOR QUALITY AND STANDARDS IN EDUCATION Department of Curriculum Management Educational Assessment Unit Annual Examinations for Secondary Schools 2017 Track 3 FORM 5 PHYSICS TIME: 2 hours Name:
Experiment 6: Viscosity (Stoke s Law)
COMSATS Institute of Information Technology, Islamabad Campus PHYS-108 Experiment 6: Viscosity (Stoke s Law) Viscosity is a property of fluids (liquids and gases) which determines how much resistance is
Science Lab List
2010-2011 Science Lab List Physics 2010 Glynlyon, Inc Released 6-1-10 Table of Contents PHYSICS (2010): UNIT 1 KINEMATICS... 1 PHYSICS (2010): UNIT 2 DYNAMICS... 2 PHYSICS (2010): UNIT 3 WORK AND ENERGY...
Effective January 2008 All indicators in Standard / 11
Scientific Inquiry 8-1 The student will demonstrate an understanding of technological design and scientific inquiry, including process skills, mathematical thinking, controlled investigative design and
(Specifications A and B)
Centre Number Surname Candidate Number Other Names For Examiner s Use Notice to Candidate. The work you submit for assessment must be your own. If you copy from someone else or allow another candidate
Lab 3: Electric Field Mapping Lab
Lab 3: Electric Field Mapping Lab Last updated 9/14/06 Lab Type: Cookbook/Quantitative Concepts Electrostatic Fields Equi-potentials Objectives Our goal in this exercise is to map the electrostatic equi-potential
Sound. Measure the speed of sound in air by means of resonance in a tube; Measure the speed of sound in a metal rod using Kundt s tube.
Sound Purpose Problem 1 Problem 2 Measure the speed of sound in air by means of resonance in a tube; Measure the speed of sound in a metal rod using Kundt s tube. Introduction and Theory When a vibrating
In which row is the size of the vector equal to the size of the scalar?
1 Each row contains a vector and a scalar. In which row is the size of the vector equal to the size of the scalar? vector displacement of a car velocity of a car velocity of a car weight of a car scalar
LESSON PLAN. B.Sc - FIRST YEAR ( REGULATION)
DEPARTMENT OF PHYSICS AND NANOTECHNOLOGY LESSON PLAN B.Sc - FIRST YEAR (2015-2016 REGULATION) FIRST SEMESTER. SRM UNIVERSITY SRM NAGAR, KATTANKULATHUR 603 203 SRM UNIVERSITY DEPARTMENT OF PHYSICS AND NANOTECHNOLOGY
Conductometric Titration & Gravimetric Determination of a Precipitate
Conductometric Titration & Gravimetric Determination of a Precipitate Experiment 9 In this experiment, you will monitor conductivity during the reaction between sulfuric acid, H2SO4, and barium hydroxide,
The Phase Change Lab: Freezing and Melting of Water
The Phase Change Lab: Freezing and Melting of Water Experiment 3 Freezing temperature is the temperature at which a substance turns from a liquid to a solid. Melting temperature is the temperature at which
I. INTRODUCTION AND LABORATORY SAFETY
EXPERIMENT 1 Chemistry 100 Measurement Techniques and Safety Purpose: To Learn the basic techniques of laboratory measurement of mass, temperature, volume and length and the concepts of safety I. INTRODUCTION
Course Title: Engineering Physics (Group-1) (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: Engineering Physics (Group-1) (Code: 3300004) Diploma Programmes in which this course is offered Automobile Engineering,
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. MECHANICAL OPERATIONS (Code: ) Chemical Engineering
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum MECHANICAL OPERATIONS (Code: 3330502) Diploma Programme in which this course is offered Chemical Engineering Semester in which offered
Rotational Motion. 1 Purpose. 2 Theory 2.1 Equation of Motion for a Rotating Rigid Body
Rotational Motion Equipment: Capstone, rotary motion sensor mounted on 80 cm rod and heavy duty bench clamp (PASCO ME-9472), string with loop at one end and small white bead at the other end (125 cm bead
Activity P24: Conservation of Linear and Angular Momentum (Photogate/Pulley System)
Name Class Date Activity P24: Conservation of Linear and Angular Momentum (Photogate/Pulley System) Concept DataStudio ScienceWorkshop (Mac) ScienceWorkshop (Win) Momentum P24 Linear Angular.DS P28 Cons
Laboratory Manual Physics_1. Index of refraction for solids
AGH University of Science and Technology in Cracow Department of Electronics Laboratory Manual Physics_ Title: 009 r. Index of refraction for solids Experiment No. 9 . Goal To determine the index of refraction
BHARATHIAR UNIVERSITY, COIMBATORE B.Sc. PHYSICS DEGREE COURSE (Colleges) Course Title
Part Ins. hrs / Week Dur.Hr CIA Marks Total Marks Credit Page 1 of 6 BHARATHIAR UNIVERSITY, COIMBATORE-641 046 B.Sc. PHYSICS DEGREE COURSE (Colleges) REVISED SCHEME OF EXAMINATIONS (CBCS PATTERN) (For
Objective: To enable the students to state and differentiate important concepts and terms that are useful to carry out Experiment 1 meaningfully.
Pre-Lab Questions 1 Topic: Measurement Objective: To enable the students to state and differentiate important concepts and terms that are useful to carry out Experiment 1 meaningfully. After answering
Conductimetric Titration and Gravimetric Determination of a Precipitate
Conductimetric Titration and Gravimetric Determination of a Precipitate LabQuest 16 In this experiment, you will monitor conductivity during the reaction between sulfuric acid, H 2 SO 4, and barium hydroxide,
# 12 ph-titration of Strong Acids with Strong Bases
# 12 ph-titration of Strong Acids with Strong Bases Purpose: A strong acid solution is titrated with a strong base solution. A titration curve is then used to determine the endpoint and find the concentration
Q11: WHAT IS A MEANT GOOD ELECTRICAL CONNECTION?
Q1. How to check for zero error in a: (i) Vernier caliper (ii) Micrometer screw gauge (iii) Meter rule (iv) Stopwatch Ans: (i) Close the jaws of the vernier caliper fully. When the zeros of both MAIN SCALE
Physics. Technician Notes. AQA AS and A Level. Objectives. Safety! Equipment. Background. Procedure
Practical 1: Investigation into the variation of the frequency of stationary waves on a string with length, tension, and mass per unit length of the string Objectives To carry out an investigation into
Al-Saudia Virtual Academy Pakistan Online Tuition Online Tutor Pakistan
Al-Saudia Virtual Academy Pakistan Online Tuition Online Tutor Pakistan Measurement Q1. What is meant by Measurement? Ans. MEASUREMENT The following information about a body or an event is called measurement.
Big Ideas 3 & 5: Circular Motion and Rotation 1 AP Physics 1
Big Ideas 3 & 5: Circular Motion and Rotation 1 AP Physics 1 1. A 50-kg boy and a 40-kg girl sit on opposite ends of a 3-meter see-saw. How far from the girl should the fulcrum be placed in order for the
IB Physics STUDENT GUIDE 13 and Processing (DCP)
IB Physics STUDENT GUIDE 13 Chapter Data collection and PROCESSING (DCP) Aspect 1 Aspect Aspect 3 Levels/marks Recording raw data Processing raw data Presenting processed data Complete/ Partial/1 Not at
Core practical 9: Investigate the relationship between the force exerted on an object and its change of momentum
Core practical 9 Teacher sheet Core practical 9: Objective To determine the momentum change of a trolley when a force acts on it, as a function of time Safety There are trolleys and masses in motion so
Inclined plane with protractor and pulley, roller, weight box, spring balance, spirit level, pan and thread.
To find the downward force, along an inclined plane, acting on a roller due to gravity and study its relationship with the angle of inclination by plotting graph between force and sin θ. Inclined plane