Wide Range. Extensive Applications.

Transcription

1 Packing for s Moist s DPE liner bags LDPE liner bags Super sack MS drums with liner bags Fibre drums with liner bags PVC jars with liner bags DPE drums with liner bags 5 / 5 lts.5 cft / 1 cft / 5 lts lts / 5 cft 1 lts 7 cft 5 / lts 5 / / 1 lts Dry s Dry Beads DPE carbouys with inner double plastic liner bags Dry Powders DPE carbouys with inner double plastic liner bags 5 / 5 kgs / / 4 kgs Protection of Ion Exchange s during Storage Ion exchange resins, supplied in dry or moist condition, require proper care at all times. Always keep the resins drums / bags closed and in shade at a temprature between C and 4 C. Moist s: s which are supplied in moist condition should not be allowed to dry. Regularly open the drums / bags and check the condition of the resins. If the resin is not moist enough, add demineralised water to keep it in completely moist condition. Dry s: s which are supplied as dry beads or dry powders should not be allowed to come in contact with moisture. Measurement Moist s: All water treatment resins and resins supplied in moist condition are generally sold on volume basis. The volume is measured in a column after backwashing, settling and draining of water to the bed surface. Dry s: All dry resins are sold on weight basis. Warning Strong oxidising agents such as nitric acid, degrade ion exchange resins to a considerable extent. This may result in an explosive reaction. Thus, before using strong oxidising agents, consult sources knowledgeable in handling of such material. Our manufacturing units are ISO 91 & 141 certified. Our Patancheru unit is also SAS 11 certified. To the best of our knowledge the information contained in this publication is accurate. Ion Exchange (India) Ltd. maintains a policy of continuous development and reserves the right to amend the information given herein without notice. Please contact our regional / branch offices for current product specifications. is the registered trademark of Ion Exchange (India) Ltd. The Preferred Choice Our range is backed by sustained focus on customer needs, intensive product and application R&D, sound technical support and wide application knowhow. Add to this continuous innovation, worldclass quality, stateoftheart ISO 91 & 141 certified facilities, an FDA approved pharmaceutical grade resin manufacturing unit...and you get the perfect recipe that makes the preferred choice across sectors for over five decades. Wide Range. Extensive R1R4 917K A complete range of cation & anion resins for water and waste water treatment as well as a host of speciality applications pharmaceutical excipients, catalysts, nuclear grade resins, chelating resins for brine softening and heavy metal removal, adsorbent grade resins, resins for removal of colour, odour, organics, nitrate & tannin, resins for purification of biodiesel, sugar, food & beverages and many more... Refinery & Petrochemical Steel, Power & Paper Food & Beverages Pharmaceuticals Biotechnology & Electronics Textiles, Sugar, Auto & Ministeel Cement & Chemicals

2 Properties and Suarised Data WBA Anion Exchange s FF IP ( 1) FF IP Isoporous (MB) N IP ( ) *meq/dry g Anion Exchange GS ( 1) 5 5 Industrial Water Treatment GS ( 1) GS () GS 4 ( ) ( 1) C N R ( 1) S4 N R polystyrene 4 SO 4 N R ( 1) ( ) 5 NR Industrial Water Treatment Controlled Ion Exchange s (CPS s) C ( ) 5 SO SO SO SO SO SO.5.5 (effective size).5.5 (effective size).5.5 (effective size) ( effective size ) ( ) ( ) ( ) ( ) to 1. Demineralisation in cocurrent and countercurrent mode. ( ) to 1. Used in mixed bed. 4 ( ) to 1. Demineralisation in cocurrent and countercurrent mode. Demineralisation in cocurrent and countercurrent mode. ( ) to 1. 5 condensate polishing & caprolactum purification. to Premium grade anion exchange resin used for () 1. 5 demineralisation in regenerable mixed bed application. 4 ( ) to 1. Demineralisation in cocurrent and countercurrent mode. ( ) to 1. Demineralisation in cocurrent and countercurrent mode. () to Premium grade anion exchange resin for demineralisation in 1. cocurrent and countercurrent mode. to 1. ( ) Used in condensate polishing unit. to ( ).95 7 Removal of organics & colour from water ( ) to 1. Demineralisation in cocurrent and countercurrent mode. 4 () to Premium grade anion exchange resin for demineralisation in 1. cocurrent and countercurrent mode. 1.5 hydrochloride 5 max Removal of strong acids from water grade cation exchange resin for water softening. 1.9 Premium grade cation exchange resin for water softening to 5 Demineralisation in cocurrent and countercurrent mode. condensate polishing & caprolactum purification. Premium grade cation exchange resin for water softening. Premium grade cation exchange resin for demineralisation. Premium grade cation exchange resin for demineralisation in regenerable mixed bed application. Premium grade cation exchange resin for demineralisation. : Strong Acid Cation, : Strong Base Anion, WBA: Weak Base Anion, WAC: Weak Acid Cation, : Speciality

3 Properties and Suarised Data WAC *meq/dry g Industrial Water Treatment 5 F F BL 7 79 Mixed Bed s Oil Removal C MB SR/ Refill Pack MB 11 MB 11 GMB MB 1 MB 1 MB 1 MB 1 P Oleophilic polystyrene Methacrylic 4 SO SO COO COO SO SO SO SO SO SO SO SO SO N R SO SO SO SO N R SO N R SO SO.45. ( effective size ) ( ) 1.7 ( ) 1.9 ( ) approx to to 7 max 1. to Premium grade cation exchange resin for water softening. Special grade cation exchanger for use in layered bed and for mixed bed condensate polishing. Premium grade cation exchange resin for water softening. In the treatment of foodstuffs, beverages, potable water and water used in the processing of food. This product conforms to NSF / ANSI standard 1 & is certified with GOLD SEAL from WQA. In the treatment of foodstuffs, beverages, potable water and water used in the processing of food. This product conforms to NSF / ANSI standard 1 & is certified with GOLD SEAL from WQA. Solvent free cation in the treatment of foodstuffs, beverages, potable water and water used in the processing of food. Colour indicating resin. Colour changes at the time of exhaustion. Recovery of metals from aqueous and nonaqueous streams. Demineralisation in cocurrent, countercurrent mode and condensate water treatment. Used in condensate polishing unit. Removal of alkaline hardness from water. Removal of alkaline hardness from water. Superregenerated mixture of cation and anion for producing ultrapure water. 1:1 volume ratio of cation in and anion in to produce high purity demineralised water. Nonregenerable mixed bed application where highest quality water is required. Colour changes at the time of exhaustion. 1: stoichiometrically equivalent volume ratio of cation in and anion in to produce high purity demineralised water. 4: volume ratio of cation and anion to produce high purity demineralised water. Nonregenerable EDM application. Production of high purity water in electronic & pharma industry. Oil removal from steam condensate of petroleum refineries, petroleum products & water contaminated with hydrocarbon. : Strong Acid Cation, : Strong Base Anion, WBA: Weak Base Anion, WAC: Weak Acid Cation, : Speciality

4 Properties and Suarised Data Polyiodide Potable Water Treatment SRCD I Arsenic and Iron Removal Fluoride Removal ASM ISR RS F Perchlorate Removal 5 F 5 F NSSR ( 1) Oxidation, Reduction Catalyst PCR NS ORC Polymer impregnated with iodine I NA NR SO SO SO WAC Microporous COO Anion Exchange Disinfection of potable water ( ) g As/l ( ).9 to NO Negligible Removal of Arsenic from potable water. This product conforms to NSF / ANSI standard 1 & is certified with GOLD SEAL from WQA. Removal of dissolved Iron from water. This product conforms to NSF / ANSI standard 1 & is certified with GOLD SEAL from WQA. Removal of fluoride from water.. Selective removal of perchlorate from ground water. 14. igh purity food grade resin for treatment of potable water and food stuff. This product conforms to NSF / ANSI standard 1 & is certified with GOLD SEAL from WQA. 14. igh purity CPS food grade resin for treatment of potable water & food stuff. 1.9 Water softening application. This product conforms to NSF / ANSI standard 1 & is certified with GOLD SEAL from WQA. The product is manufactured by a non solvent process. 4. to 5 max Removal of alkaline hardness from water. Selective removal of Nitrates from water. This product conforms to NSF / ANSI standard 1 & is certified with GOLD SEAL from WQA. Removal of halogens and oxidising agents. Nuclear Grade s Anion Exchange s * meq/dry g NG NG Li ARU 4 GS NG SO SO SO Li max igh purity ion exchange resin (in hydrogen form) for use in nuclear power plants. igh purity CPS ion exchange resin (in hydrogen form) for use in nuclear power plants. igh purity ion exchange resin (in lithium form) for use in nuclear power plants. Recovery of Uranium from leach liquors. igh strength strong base anion resin ( I) for use in nuclear power plants. : Strong Acid Cation, : Strong Base Anion, WBA: Weak Base Anion, WAC: Weak Acid Cation, : Speciality 7

5 Properties and Suarised Data WBA WAC *meq/dry g Nuclear Grade s Anion Exchange s Mixed Bed s Mixed s Catalyst Grade s Anion Exchange Chelating s GS NG GS CAM 14 CAM 19 MSR TCR BSR SIR ydrometallurgy SO N R SO N R SO SO SO SO NR Thiol ThioUronium Amino Phosphonic Iminodiacetic SO SO SO COO SO Li.5.5 max.4 1. <.4 1. <.4 1. < ( ) * 4.* 4.7* * 1.4. ( ) 9. ( ) 1.9 ( ) 1.7 ( ) 1. ( ) 4.. hydrochloride 5 max to < 45 to Ca < to igh strength CPS strong base anion resin ( I) for use in nuclear power plants. Oxygen scavenging. 1:4 volume mixture of cation and anion to produce high purity alkaline water for use in nuclear power plants. 1:9 volume mixture of cation and anion. Used in nuclear power plants. Catalyst for organic reactions like esterification etc. Catalyst grade resin for esterification and alkylation reactions. Premium catalyst for specialised applications such as esterification, alkylation etc. Catalyst for manufacture of butyl acetate, ethylacetate, olefin hydration & bisphenol A. As catalyst in aldolization reactions. Selective adsorption of bivalent mercury from industrial effluents. Selective recovery of mercury and precious metals. Decalcification of secondary brine in chloralkali industry. Extraction and recovery of metals, removal of heavy metals from various organic or inorganic chemical products. Recovery of metals from aqueous and nonaqueous streams. Recovery of metals from aqueous and nonaqueous streams. Recovery of metals from aqueous and nonaqueous streams. Recovery of metals from aqueous and nonaqueous streams. : Strong Acid Cation, : Strong Base Anion, WBA: Weak Base Anion, WAC: Weak Acid Cation, : Speciality 9

6 Properties and Suarised Data WBA WAC Anion Exchange s GS () ( I) * meq/dry g 95 ( I) S ( 1) 9 A ( 1) 45 ( 1) S Mixed Bed Chemical Process Application 5 P GMW 11 (GVI) Cross linked Methaacrylic acid COO N R N R N R N R N R N R N R SO COO SO N R COO ( ) ( ) () () ( ) ( ) 1.4 to 1. Removal and recovery from process streams. 5 to 1. Removal of high level of colour bodies from sugar syrup. 5 Removal of colour bodies from sugar syrup and other process to.95 7 streams. This product conforms to NSF / ANSI standard 1 17 & is certified with GOLD SEAL from WQA. to. Removal of high level of colour bodies from sugar syrup. to Treatment of nonaqueous solution such as deashing of 1.1 % glucose, dextrose, sorbitol, gelatin & purification of MSG. 1. Treatment of nonaqueous solution such as deashing of hydrochloride glucose, dextrose, sorbitol, gelatin & purification of MSG. 5 max.95 hydrochloride Deacidification of process streams. 5 max 1. hydrochloride Colour removal from textile effluent. 5 max Removal of strong acids in non water, pharma & speciality applications to 75 min to Special grade cation exchanger for applications demanding higher oxidation stability such as gelatin purification, heavy metal removal etc. Ideal for the uptake of toxic / undesirable heavy metals, temporary hardness from process liquor and industrial water. 4 Removal of alkaline hardness from water in Beverage Industry. Specially developed mix of resins for use in electroplating applications. Colour changes at the time of exhaustion. : Strong Acid Cation, : Strong Base Anion, WBA: Weak Base Anion, WAC: Weak Acid Cation, : Speciality 11

7 Properties and Suarised Data * meq/dry g ** sodium glycocholate exchange capacity Pharmaceutical Grade s 4 4 Polymethacrylic Polymethacrylic COO COO SO <. < COO K <. < SO <. <5 K <. < Ca <. < >.75 45% 454 N R <1 <. 1% COO <. <5.* * Sustained release agent in drug formulations. Treatment of yperkalaemia. 1..** Taste masking of bitter drugs such as Norfloxacin, Ofloxacin, Roxithromycin, Dicyclomine ydrochloride, Famotidine and B 1 stabilisation etc. Taste masking of bitter drugs such as Ciprofloxacin, Chloroquine Phosphate etc. as well as tablet disintegration. Tablet disintegrant/taste masking. Product meets specifications of Polacrilin Potassium, USP. Cholestyramine resin used for lowering serum cholesterol levels. Taste masking, drug stabilisation, controlled release & active ingredient. Nicotine taste masking and sustained release. : Speciality 1 1

8 Properties and Suarised Data Adsorbent Grade s PA 5 PA PA PA Purification of Aloe Vera juice and Methi extract. 1 igh surface area polymers for recovering nonpolar substances from aqueous and non aqueous streams. Phenol removal from and effluent. igh surface area polymers for recovering nonpolar substances from aqueous and non aqueous streams. * meq/dry g Biodiesel Manufacture & Purification 19 BF BF 17 SO Acidic.4 1. < 75 < 4.7* Esterification of FFA..9 Purification of raw biodiesel to remove residual FFA from.5 1.% to less than.1%. Purification of raw biodiesel for removal of glycerine, soap, moisture etc. : Speciality For more information visit us at : We offer several other speciality resins for a wide variety of applications. These include fine mesh resins for chromatographic separations; dessicant grade resins for moisture removal from sovlents & resins for peptide synthesis. 14