Energence Rooftop Packaged Units

Transcription

1 Energence Rooftop Packaged Units Ultra-high efficiency design Gas/electric or electric/electric operation Exclusively distributed by US NZ

2 Energence Rooftop Packaged Units Introduction & Overview The Energence Rooftop Packaged Units has been specifically engineered for ultra-high efficiency. Designed with sustainability in mind, Energence incorporates many energy efficient features such as Environ heat exchangers, constant air volume supply fans and industry-leading Prodigy Control system. vailable as gas/electric operation. Market Segments Retail Offices Industrial Education Civic Light Commercial Features & Benefits The Lennox Energence Rooftop Packaged Unit offers: Reliable scroll compressor technology with isolated compressor compartment for ease of service. Environ light-weight heat exchanger design is more efficient and uses less refrigerant than traditional coils. Gas heating system with aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic single or dual stage gas valve with manual shut-off. Belt driven motors with adjustable pulley for speed change. Blower assembly slides out for ease of service. Smartirflow system continuously adjusts the economizer dampers to deliver precise ventilation and up to 35% savings. TX valves for improved efficiency and refrigerant control. Full perimeter base rail for structural integrity during transport. Rigging holes and forklift slots or ease of transport. Removable corrosion resistant double-sloped drain pan to minimise risk of water leaks. Superior operating range: Cooling -1 to 52 C. Heating: 100% capacity at low ambient conditions. Control Options The Prodigy Control System is supplied standard with all Energence units. The intuitive user interface makes setup, troubleshooting and service easier than ever. SmartWire system simplifies installation of sensors and thermostats with advanced, colour-coded connectors. Energence can be configured with the following options: Commercial Touchscreen Thermostat BMS interface: Modbus, BCnet, LonWorks Internal sensor & time clock. Nomenclature Brand/Family L = Energence Major Design Sequence H = 1st generation Cooling Efficiency H = High Efficiency S = Std Efficiency Blower Type T = Belt Drive (2 Speed) B = Belt Drive (2 Speed) Minor Design Sequence 1 = 1st revision 2 = 2nd revision 3 = 3rd revision L G H 120 H 4 B S 1 M Unit Type G = Packaged Unit Gas Heating with Electric Cooling Cooling Capacity 036 = 9.08kW 048 = 12.64kW 060 = 15.60kW 072 = 18.84kW 092 = 23.46kW = 26.02kW 120 = 30.94kW 150 = 35.91kW 156 = 38.96kW 180 = 45.08kW 210 = 50.65kW 240 = 58.07kW 300S = 71.30kW 300H = 77.54kW 360H = 96.77kW Refrigerant Type 4 = R410 Heating Type S = Standard Gas Heat, 1 stage M = Medium Gas Heat, 1 stage H = High Gas Heat, 2 stage T = High Gas Heat, 1 stage U = Medium Gas Heat, 2 stage Voltage M = 380/240V - 3 phase - 50Hz 2 US NZ

3 Flexible Handing Options Standard Vertical Optional Horizontal (On-site panel change) Optional Supply Optional Return Std Supply Std Return Optional Roof Curb Designed for ease of installation, an optional roof curb can save significant time and money on site. Other benefits include improved efficiency and aesthetics compared to external ductwork, with one roof penetration. Heatcraft offers custom-made roof curbs to suit your installation. For replacement units Landmark Rooftop Packaged Units can be connected to your existing roof curb with a custom roof curb adaptor. Optional ccessories MODEL NUMBER LGH036S4T LGH048S4T LGH060S4T LGH072H4B LGH092H4 LGHH4 LGH120H4 LGH150S4 LGH156H4B LGH180H4B LGH210H4B LGH240H4B LGH300S4B LGH300H4B LGH360H4B BROMETRIC RELIEF X X X X X X X X X X X X X X X BLOWER BELT UTO-TENSIONER O O O O O O O O O O O O O O O CO2 SENSOR X X X X X X X X X X X X X X X COIL GURDS (NOT TO BE USED WITH HIL GURDS) X X X X X X X X X X X X X X X CONDENSTE DRIN TRP - PVC OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX CORROSION PROTECTION O O O O O O O O O O O O O O O DRIN PN OVERFLOW SWITCH OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX ENTHLPY CONTROL OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX FILTERS OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX FRESH IR TEMPERING OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX HIL GURDS (NOT TO BE USED WITH COIL GURDS) HIGH PERFORMNCE ECONOMIZER WITH OUTDOOR IR HOOD X X X X X X X X X X X X X X X OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX HORIZONTL DISCHRGE KIT X X X X X X X X X X X X X X X HUMIDITY SENSING KIT X X X X X X X X X X X X X X X INTEROPERBILITY VI BCNET OR LONTLK PROTOCOLS OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OUTDOOR IR DMPERS - MNUL OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OUTDOOR IR DMPERS - MOTORIZED OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX POWER EXHUST FN OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX ROOF CURBS X X X X X X X X X X X X X X X SMOKE DETECTOR - SUPPLY OR RETURN STNDRD ECONOMIZER WITH OUTDOOR IR HOOD OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX OX X = Field installed; O = Factory option must be specified at time of order. Lead-times apply; OX = Can be either Field installed or Factory Option US NZ

4 Energence Rooftop Packaged Units Technical Data Summary MODEL NUMBER (GS ELECTRIC) LGH036S4T LGH048S4T LGH060S4T LGH072H4B LGH092H4 LGHH4 LGH120H4 LGH150S4 LGH156H4B LGH180H4B LGH210H4B LGH240H4B LGH300S4B LGH300H4B LGH360H4B TOTL CPCITY S/NZS COOLING 1 kw HETING 2 kw NETT CPCITY S/NZS COOLING 1 kw HETING 2 kw INPUT POWER S/NZS EER S/NZS COOLING kw HETING kw COOLING THERML HETING 80% 80% 80% 80% 81% 81% 81% 81% 80% 80% 80% 80% 80% 80% 80% MEPS COMPLINT YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES G CERTIFIED YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES HET EXCHNGER TYPE COPPER TUBE WITH RIPPLED-EDGE LUMINUM FINS COMPRESSOR TYPE COPELND ULTRTECH SCROLL 2-STGE 1-STGE SCROLL FNS OUTDOOR TYPE INDOOR TYPE DIRECT DRIVE XIL BELT DRIVEN, FC DWDI CENTRIFUGL POWER SUPPLY V / Ø / Hz / 3 / 50 COMPRESSOR 1 COMPRESSOR 2 COMPRESSOR 3 COMPRESSOR 4 RTED LOD MPS LOCKED ROTOR MPS RTED LOD MPS LOCKED ROTOR MPS RTED LOD MPS LOCKED ROTOR MPS RTED LOD MPS LOCKED ROTOR MPS NO. OF FNS OUTDOOR FN MOTOR FULL LOD MPS TOTL MPS NO. OF FNS POWER EXHUST 0.25 kw FULL LOD MPS TOTL MPS INDOOR BLOWER MOTOR kw FULL LOD MPS UNIT ONLY MXIMUM OVERCURRENT PROTECTION WITH (1) 0.25 kw POWER EXHUST WITH (2) 0.25 kw POWER EXHUST WITH (3) 0.25 kw STNDRD POWER EXHUST MXIMUM (L/S) IRFLOW (EVPORTOR) NOMINL (L/S) MINIMUM (L/S) EXTERNL STTIC PRESSURE MXIMUM IRFLOW (Pa) NOMINL IRFLOW (Pa) US NZ

5 Technical Data Summary - (cont.) MODEL NUMBER (GS ELECTRIC) LGH036S4T LGH048S4T LGH060S4T LGH072H4B LGH092H4 LGHH4 LGH120H4 LGH150S4 LGH156H4B LGH180H4B LGH210H4B LGH240H4B LGH300S4B LGH300H4B LGH360H4B HEIGHT (mm) DIMENSIONS (UNIT) WIDTH (mm) DEPTH (mm) NET WEIGHT UNIT SOUND POWER LEVEL COOLING ONLY (kg) db Total cooling capacity at S/NZS rating conditions: temperature of air entering on outdoor side 35 C DB / 24 C WB and on indoor side 27 C DB / 19 C WB. 2. Total heating capacity at S/NZS rating conditions: temperature of air entering on outdoor side 7 C DB / 6 C WB and on indoor side 20 C DB / 15 C WB. Field Information MODEL NUMBER (GS ELECTRIC) LGH036S4T LGH048S4T LGH060S4T LGH072H4B LGH092H4 LGHH4 LGH120H4 LGH150S4 LGH156H4B LGH180H4B LGH210H4B LGH240H4B LGH300S4B LGH300H4B LGH360H4B No. of circuits REFRIGERNT (R410a) FCTORY CHRGE (kg) CONDENSTE DRIN CONNECTION SIZE/TYPE (1) 1'' NPT (1) 1'' FPT (1) 1'' NPT IR DUCT SPIGOT (STD) SUPPLY H x W (mm) RETURN H x W (mm) 508 X X X X X X X X X X X X X X X X X 711 (2) (V) 381 X 1537 (V) 508 X 711 (2) (V) 381 X 1537 (V) 508 X 711 (2) (V) 381 X 1537 (V) 508 X 711 (2) (V) 381 X 1537 (V) 508 X 711 (2) (V) 381 X 1537 (V) 508 X 711 (2) (V) 381 X 1994 (V) 508 X 711 (2) (V) 381 X 1994 (V) H - Horizontal V - Vertical US NZ

6 Energence Rooftop Packaged Units Unit Clearances LGH032 to LGH072 UNIT CLERNCE 1 B C D TOP CLERNCE mm mm mm mm Service Clearance Clearance to Combustibles Unobstructed Minimum Operation Clearance NOTE - Entire perimeter of unit base requires support when elevated above the mounting surface. 1 Service Clearance - Required for removal of serviceable parts. Clearance to Combustibles - Required clearance to combustible material. Minimum Operation Clearance - Required clearance for proper unit operation. C OUTDOOR IR HOOD B D LGH092 to LGH150 UNIT CLERNCE 1 B C D TOP CLERNCE mm mm mm mm Service Clearance Clearance to Combustibles Unobstructed Minimum Operation Clearance NOTE - Entire perimeter of unit base requires support when elevated above the mounting surface. 1 Service Clearance - Required for removal of serviceable parts. Clearance to Combustibles - Required clearance to combustible material. Minimum Operation Clearance - Required clearance for proper unit operation. C OPTIONL OUTDOOR IR HOOD D DB LGH156 to LGH300 UNIT CLERNCE 1 B C D TOP CLERNCE mm mm mm mm Service Clearance Clearance to Combustibles Unobstructed Minimum Operation Clearance NOTE - Entire perimeter of unit base requires support when elevated above the mounting surface. 1 Service Clearance - Required for removal of serviceable parts. Clearance to Combustibles - Required clearance to combustible material. Minimum Operation Clearance - Required clearance for proper unit operation. OUTDOOR IR HOOD C D B Note: US NZ

7 Unit Clearances LGH300 & LGH360 - Unit with Economizer UNIT CLERNCE 1 B C D TOP CLERNCE mm mm mm mm Service Clearance Clearance to Combustibles Unobstructed Minimum Operation Clearance NOTE - Entire perimeter of unit base requires support when elevated above the mounting surface. 1 Service Clearance - Required for removal of serviceable parts. Clearance to Combustibles - Required clearance to combustible material. Minimum Operation Clearance - Required clearance for proper unit operation. mizer OUTDOOR IR HOOD C D B LGH300 & LGH360 - Unit With Horizontal Barometric Relief Dampers UNIT CLERNCE 1 B C TOP CLERNCE mm mm mm Service Clearance Clearance to Combustibles Unobstructed Minimum Operation Clearance NOTE llow adequate clearance for duct and barometric relief damper installation. NOTE Dampers may be installed on each side of return air duct or end to end on one side of return air duct. OPTIONL BROMETRIC RELIEF EXHUST DMPERS (Field Installed on Return ir Duct) ith Horizontal Barometric Relief Dampers NOTE llow adequate clearance for duct and barometric relief damper installation. NOTE Dampers may be installed on each side of return air duct or end to end on one side of return air duct. OUTDOOR IR HOOD OPTIONL BROMETRIC RELIEF EXHUST DMPERS (Field Installed on Return ir Duct) C B US NZ

8 Energence Rooftop Packaged Units Dimensions LGH036 to LGH072 MODEL NUMBER CORNER WEIGHTS CENTER OF GRVITY BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. kg kg kg kg kg kg kg kg mm mm mm mm LGH LGH LGH LGH Base Unit - The unit with NO INTERNL OPTIONS. Max. Unit - The unit with LL INTERNL OPTIONS Installed. (Economizer, Standard Static Power Exhaust Fans, Controls, etc.). Does not include accessories external to unit or high static power exhaust (5-5/8) (279) 413 (16-1/4) 457 (18) 1194 (47) 178 (7) BOTTOM RETURN IR OPENING 737 (29) DD 673 (26-1/2) BOTTOM SUPPLY IR OPENING CENTER OF GRVITY 168 (6-5/8) 127 (5) FF 508 (20) EE BOTTOM POWER ND GS ENTRY 76 x 203 (3 x 8) TOP VIEW (Base) BOTTOM CONDENSTE OUTLET 654 (25-3/4) 241 (9-1/2) BB CC 1143 (45) 2115 (83-1/4) 25 (1) 987 (38-7/8) 036 thru (46-7/8) 060 thru (35-3/8) 036 thru (43-3/8) 060 thru (3-1/2) CONDENSTE OUTLET (EITHER SIDE) GS INLET FLUE/VENT OUTLET 140 (5-1/2) ELECTRICL INLET GS OUTLET FOR BOTTOM GS PIPING 381 (15) 25 (1) 1194 (47) END VIEW LIFTING HOLES (For rigging) 673 (26-1/2) 2165 (85-1/4) 495 (19-1/2) 467 (18-3/8) 686 (27) 279 (11) 51 (2) 508 (20) 737 (29) FORKLIFT SLOTS (Front, Back and Blower End) HORIZONTL SUPPLY IR OPENING BCK 140 HORIZONTL 140 RETURN IR (5-1/2) OPENING (5-1/2) (Without Economizer) 8 US NZ

9 Dimensions LGH092 to LGH150 MODEL NUMBER CORNER WEIGHTS CENTER OF GRVITY BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. kg kg kg kg kg kg kg kg mm mm mm mm LGH LGH LGH LGH Base Unit - The unit with NO INTERNL OPTIONS. Max. Unit - The unit with LL INTERNL OPTIONS Installed. (Economizer, Standard Static Power Exhaust Fans, Controls, etc.). Does not include accessories external to unit or high static power exhaust. 156 (6-1/8) 143 (5-5/8) BOTTOM SUPPLY IR OPENING BB 156 (6-1/8) 1527 (60-1/8) BOTTOM GS POWER ENTRY 140 (5-1/2) Dia. 178 (7) DD 686 (27) 610 (24) BOTTOM RETURN IR OPENING 168 (6-5/8) 178 (7) 886 (34-7/8) EE 508 (20) 711 (28) BOTTOM CONDENSTE 2572 (101-1/4) TOP VIEW CENTER OF GRVITY FF CC 1476 (58-1/8) 2521 (99-1/4) 1 (43-3/8) 1191 (46-7/8) 25 (1) CONDENSTE DRIN (FRONT) 137 (5-3/8) GS SUPPLY INLET 470 (18-1/2) FLUE OUTLET 1191 (46-7/8) 1527 (60-1/8) END VIEW 89 (3-1/2) ELECTRIC INLETS 886 (34-7/8) 1013 (39-7/8) FORKLIFT SLOTS (BOTH SIDES) 2572 (101-1/4) LIFTING HOLES (FOR RIGGING) 394 (15-1/2) 41 (1-5/8) 394 (15-1/2) HORIZONTL SUPPLY IR OPENING HORIZONTL RETURN IR OPENING 762 (30) 308 (12-1/8) 156 (6-1/8) 800 (31-1/2) 1686 (66-3/8) CONDENSTE DRIN (BCK) 762 (30) 137 (5-3/8) (Horizontal Openings) US NZ

10 Energence Rooftop Packaged Units Dimensions LGH156 MODEL NUMBER CORNER WEIGHTS CENTER OF GRVITY BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. kg kg kg kg kg kg kg kg mm mm mm mm LGH156 (Environ Coil) LGH156 (Fin/Tube Coil) Base Unit - The unit with NO INTERNL OPTIONS. Max. Unit - The unit with LL INTERNL OPTIONS Installed. (Economizer, Standard Static Power Exhaust Fans, Controls, etc.). Does not include accessories external to unit or high static power exhaust. LTERNTE (THRU THE ) CONDENSTE DRIN LOCTION 41 mm (1-5/8 in.) Diameter 721 (28-3/8) 143 (5-5/8) 314 (12-3/8) 314 (12-3/8) 108 (4-1/4) 1537 (60-1/2) 381 (15) BOTTOM RETURN IR OPENING BOTTOM SUPPLY IR OPENINGS 457 (18) 114 (4-1/2) (28) (28) 508 (20) 508 (20) BB EE CENTER OF GRVITY FF DD BOTTOM POWER ENTRY 127 x 203 (5 x 8) TOP VIEW CC 2289 (90-1/8) 2705 (106-1/2) 1295 (51) CONDENSTE DRIN GS SUPPLY INLET SIDE ELECTRICL 137 INLETS (5-3/8) 260 (10-1/4) 1378 (54-1/4) FLUE OUT LET 730 (28-3/4) GS SUPPLY OUTLET (For Bottom Gas Supply Only) 2315 (91-1/8) 210 (8-1/4) 83 (3-1/4) LIFTING HOLES (For Rigging Front and Back) FORKLIFT SLOTS (Front and Left Side Only) 2737 (107-3/4) END VIEW 10 US NZ

11 Dimensions LGH180 MODEL NUMBER CORNER WEIGHTS CENTER OF GRVITY BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. kg kg kg kg kg kg kg kg mm mm mm mm LGH180 (Environ Coil) LGH180 (Fin/Tube Coil) Base Unit - The unit with NO INTERNL OPTIONS. Max. Unit - The unit with LL INTERNL OPTIONS Installed. (Economizer, Standard Static Power Exhaust Fans, Controls, etc.). Does not include accessories external to unit or high static power exhaust. LTERNTE (THRU THE ) CONDENSTE DRIN LOCTION 41 mm (1-5/8 in.) Diameter 721 (28-3/8) 143 (5-5/8) 314 (12-3/8) 314 (12-3/8) 108 (4-1/4) 1537 (60-1/2) 381 (15) BOTTOM RETURN IR OPENING BOTTOM SUPPLY IR OPENINGS 457 (18) 711 (28) 508 (20) 114 (4-1/2) 711 (28) 508 (20) BB EE CENTER OF GRVITY FF DD BOTTOM POWER ENTRY 127 x 203 (5 x 8) TOP VIEW CC 2289 (90-1/8) 3369 (132-5/8) 1295 (51) CONDENSTE DRIN GS SUPPLY INLET SIDE ELECTRICL 137 INLETS (5-3/8) 10-1/4 (260) 1378 (54-1/4) FLUE OUT LET 730 (28-3/4) GS SUPPLY OUTLET (For Bottom Gas Supply Only) 2315 (91-1/8) END VIEW 210 (8-1/4) 83 (3-1/4) LIFTING HOLES (For Rigging Front and Back) FORKLIFT SLOTS (Front and Left Side Only) 2737 (107-3/4) 645 (25-3/8) US NZ

12 Energence Rooftop Packaged Units Dimensions LGH210 to LGH300S MODEL NUMBER CORNER WEIGHTS CENTER OF GRVITY BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. kg kg kg kg kg kg kg kg mm mm mm mm LGH210 (Environ Coil) LGH210 (Fin/Tube Coil) LGH240 (Environ Coil) LGH240 (Fin/TubeCoil) LGH300 (Environ Coil) LGH300 (Fin/Tube Coil) Base Unit - The unit with NO INTERNL OPTIONS. Max. Unit - The unit with LL INTERNL OPTIONS Installed. (Economizer, Standard Static Power Exhaust Fans, Controls, etc.). Does not include accessories external to unit or high static power exhaust. LTERNTE (THRU THE ) CONDENSTE DRIN LOCTION 41 mm (1-5/8 in.) Diameter 108 (4-1/4) (12-3/8) 381 (15) (28-3/8) 143 (5-5/8) 314 (12-3/8) 457 (18) 711 (28) 508 (20) 1537 (60-1/2) BOTTOM RETURN IR OPENING BOTTOM SUPPLY IR OPENINGS 114 (4-1/2) 711 (28) 508 (20) BB EE DD CENTER OF GRVITY FF BOTTOM POWER ENTRY 127 x 203 (5 x 8) TOP VIEW CC 2289 (90-1/8) 3369 (132-5/8) 1295 (51) CONDENSTE DRIN GS SUPPLY INLET SIDE ELECTRICL 137 INLETS (5-3/8) 260 (10-1/4) 1378 (54-1/4) FLUE OUT LET 730 (28-3/4) GS SUPPLY OUTLET (For Bottom Gas Supply Only) 91-1/8 (2315) END VIEW 210 (8-1/4) 83 (3-1/4) LIFTING HOLES (For Rigging Front and Back) FORKLIFT SLOTS (Front and Left Side Only) 2737 (107-3/4) 645 (25-3/8) 12 US NZ

13 Dimensions - ccessories - LGH156 to LGH300S Optional Horizontal Roof Curb - Requires Optional Horizontal Return ir Panel Kit 46 (1-13/16) 46 (1-13/16) Frame Opening 2099 (82-5/8) 2594 (-1/8) 2502 (98-1/2) 46 (1-13/16) (26) (37) (30) (41) Frame Opening SECTION - 25 (1) NILER STRIP 51 (2) 46 (1-13/16) NOTE LRMFH18/24-26 and LRMFH30/36-30 are designed for horizontal discharge when unit is mounted on a slab. LRMFH18/24-37 and LRMFH30/36-41 are designed for horizontal discharge when unit is mounted on a rooftop. PNEL TO COVER RETURN IR OPENING IN BOTTOM OF UNIT (Furnished With Optional Horizontal Return ir Panel Kit) 2191 (86-1/4) 2502 (98-1/2) 1372 (54) SUPPLY IR TURNING VNE NOTE Roof deck may be omitted within confines of curb. (Packaged Unit) 46 (1-13/16) TOP VIEW 2594 (-1/8) 1,2 210 (8-1/4) 3,4 337 (13-1/4) 2191 (86-1/4) NILER STRIP 140 (5-1/2) (26) (37) (30) (41) 75 CURB SUPPLY (1905) IR OPENING With 38 mm (1-1/2 in.) FLNGE 1,2 356 (14) 3,4 457 (18) 1,3 165 (6-1/2) 2,4 445 (17-1/2) SUPPLY IR TURNING VNE SUPPLY DUCT PNELS 2604 (-1/2) 2200 (86-5/8) FRONT VIEW 1 LRMFH18/ LRMFH18/ LRMFH30/36-30 (used with 300S) 4 LRMFH30/36-41 (used with 300S) HORIZONTL SUPPLY ND RETURN IR OPENINGS WITH HORIZONTL ROOF CURB OPTIONL RETURN IR PNEL KIT (Required for Horizontal pplications) 1378 (54-1/4) (76-1/4) (87-1/4) (80-1/4) (91-1/4) 381 (15) 51 (2) 1537 (60-1/2) HORIZONTL RETURN IR OPENING 314 (12-3/8) (22) (33) (26) (37) 772 (30-3/8) 1905 (75) HORIZONTL SUPPLY IR OPENING 1,2 356 (14) 3,4 457 (18) 1,2 210 (8-1/4) 3,4 337 (13-1/4) NOTE Top of Roof Curb extends mm (4 inch) inside bottom of unit base. See Typical flashing detail. HORIZONTL ROOF CURB (Required For Horizontal pplications) 1 LRMFH18/ LRMFH18/ LRMFH30/36-30 (used with 300S Models Only) 4 LRMFH30/36-41 (used with 300S Models Only) 1,3 165 (6-1/2) 2,4 445 (17-1/2) US NZ

14 Energence Rooftop Packaged Units Dimensions LGH300H & LGH360H MODEL NUMBER CORNER WEIGHTS CENTER OF GRVITY BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. kg kg kg kg kg kg kg kg mm mm mm mm LGH LGH Base Unit - The unit with NO INTERNL OPTIONS. Max. Unit - The unit with LL INTERNL OPTIONS Installed. (Economizer, Standard Static Power Exhaust Fans, Controls, etc.). Does not include accessories external to unit or high static power exhaust. 108 (4-1/4) EE BB 146 (5-3/4) 381 (15) 1994 (78-1/2) BOTTOM RETURN IR OPENING 457 (18) CENTER OF GRVITY 445 (17-1/2) 711 (711) (28) (20) (20) (4-1/2) BOTTOM SUPPLY IR OPENINGS FF DD 229 (9) CC BOTTOM POWER/GS ENTRY 127 X 203 mm (5 X 8 inches) TOP VIEW 2289 (90-1/8) 3683 (145) 137 (5-3/8) SIDE ELECTRICL INLETS 1651 (65) 1568 (61-3/4) GS SUPPLY INLET (For Bottom Gas Supply Only) 146 (5-3/4) FLUE OUTLET OPTIONL OUTDOOR GRILLE KIT (Field Installed) (Both Sides) 800 (31-1/2) 83 (3-1/4) FORKLIFT SLOTS CONDENSTE DRIN (Front and Left Side Only) 2305 (90 3/4) 3042 (119 3/4) END VIEW LIFTING HOLES (For Rigging Front and Back) 654 (25-3/4) 14 US NZ

15 Dimensions - ccessories - LGH300H & LGH360H Optional Horizontal Roof Curb - Requires Optional Horizontal Return ir Panel Kit 46 (1-13/16) 46 (1-13/16) 2594 (-1/8) 2502 (98-1/2) Frame Opening Frame 2191 (86-1/4) Opening 2099 (82-5/8) 46 (1-13/16) (30) 25 (1) (41) NILER STRIP 51 (1) SECTION (98-1/2) NOTE LRMFH30/36-30 is designed for horizontal discharge when unit is mounted on a slab. LRMFH30/36-41 is designed for horizontal discharge when unit is mounted on a rooftop. PNEL TO COVER RETURN IR OPENING IN BOTTOM OF UNIT (Furnished With Optional Horizontal Return ir Panel Kit) 1372 (54) SUPPLY IR TURNING VNE NOTE Roof deck may be omitted within confines of curb. (PCKGED UNIT) 46 (1-13/16) TOP VIEW 1, (13-1/4) 2594 (-1/8) 2191 (86-1/4) NILER STRIP 140 (5-1/2) (30) (41) 75 (1905) CURB SUPPLY IR OPENING With 38 mm (1-1/2 in.) FLNGE 1, (18) (6-1/2) (17-1/2) SUPPLY IR TURNING VNE SUPPLY DUCT PNELS 2604 (-1/2) FRONT VIEW 2200 (86-5/8) 1 LRMFH30/ LRMFH30/36-41 HORIZONTL SUPPLY ND RETURN IR OPENINGS ROOFTOP UNIT WITH HORIZONTL ROOF CURB 2311 (91) LRMFH30/ () LRMFH30/ (65) OPTIONL RETURN IR PNEL KIT (Required For Horizontal pplications) 1994 (78-1/2) 381 (15) HORIZONTL RETURN 51 (2) IR OPENING 133 (5-1/4) (26) LRMFH30/ (37) LRMFH30/ (75) HORIZONTL SUPPLY IR OPENING 457 (18) 337 (13-1/4) 1 NOTE Top of Curb extends mm (4 inch) inside bottom of unit base. See Typical Flashing Detail (42-7/8) HORIZONTL ROOF CURB (Required For Horizontal pplications) (Horizontal Openings) 165 (6-1/2) LRMFH30/ (17-1/2) LRMFH30/36-41 US NZ

16 The contents of this brochure are copyright protected and may not be reproduced in any form without the written consent of Heatcraft. Recommendations and advice regarding the use of the products described in this publication are to be taken as a guide only and are given without liability on the part of the company or its employees. s Heatcraft continually improves its product range and processes, Heatcraft reserves the right to change product specifications without any prior notification. Please refer to the Heatcraft website for the latest version of this publication. The purchaser should independently determine the suitability of the product for the intended use and application and that the product complies with relevant standards. Heatcraft accepts no responsibility for loss or damage (direct or indirect and including consequential loss, loss of profits or opportunity and economic loss) however arising which results from any errors or omissions in the information contained in this publication or arising from the use or application of the information contained herein. LENNOXENERGENCE_1116 australia lennoxaus.com.au new zealand lennoxnz.co.nz and Registered Trade Mark and Trade Mark of Heatcraft ustralia Pty Ltd Copyright 2016 Heatcraft ustralia Pty Ltd 16 US NZ