SYNTHESIS OF AN AZO DYE revisited (1 or 2 credits)
|
|
- Jacob King
- 5 years ago
- Views:
Transcription
1 SYNTHESIS OF AN AZO DYE revisited (1 or 2 credits) This lab you can revisit the fist experiment of this quarter and synthesize more azo dyes of your choice. The old procedure is given below followed by some suggested changes you could do in the experiment to enhance your yield. If you synthesized one dye you get 1 credit, 2 dyes 2 credits. Note: if you can isolate and highly purify you solid dye you can received up to 5 extra credit points. AZO DYE SYNTHESIS Azo dyes are synthesized via the following reaction. A primary amine (R-NH2) is converted to a diazonium salt and this is reacted with another aryl unit. X NaNO 2 + N N H 3 PO 4 acitvated aromatic X=, OH, OR N N X primary amine diazonium salt azo dye Synthesis of your Dye(s): Choose two compounds from the list on the next page (note that we added p-bromoaniline as a possible amine). The first must be a primary amine (NH2). This is the compound you will react with sodium nitrite in the first step of the reaction. The second compound you choose can be any of the activated aromatic listed in the second group of compounds. This compound will be used in the second step of the reaction when you add this to the diazonium salt that you generate in the first step. To Prepare for this lab: Review the lab from earlier this quarter. Also review possible modification section below. Prelab to be turned into your instructor before you begin. Pick your primary amine and activated aromatic and write the reaction equation for your dye reaction. Draw the most likely azo dye product. Also consider that you may have more than one product due to ortho, para substitution parameters--if you feel that you might produce more than one product you can draw all that you feel might be possible Create a reagent table for each reaction The table should include names of starting materials, MW, moles and grams to be used and theoretical yield of the dye. List all amines as toxins. You do not need to list the name of the dye or any melting \ boiling point information
2 PRIMARY AMINES: Choose one of the below for the first step of the reaction Aniline NH 2 Cl SO 2 Sulfanilamide SO 3 H Sulfanic acid Chloroaniline HO 3 S 6-amino-2-naphthalene sulfonic acid, ACTIVATED AROMATICS: Choose one of the below for the second step of the reaction OH H 3 C CH 3 N HO 3 S Aniline 2-napthol NN-dimethylaniline 6-amino-2-naphthalene sulfonic acid, OH Cl 1-napthol SO 2 Sulfanilamide SO 3 H Sulfanic acid Chloroaniline
3 Part B: DYEING FABRIC In the last part of the experiment (part B) you will use your synthesized dye to color a special swatch of fabric. The swatch is woven such that it contains bands of some of the more common fibers used in making clothing. The fibers included are both natural fibers and synthetic. Here you will explore how the interaction of the dye with the fiber affects the color. The fibers contained in the swatch are shown below. Fabric type (starting a end with black thread) Acetate SEF Arnel (bright) Bleached cotton Creslan 61 Dacron 54 Dacron 64 Nylon 6.6 Orlon 75 Spun silk Polypropylene Viscose Wool
4 PROCEDURE #1 Part A. Synthesis of Azo Dye Step 1--Formation of the diazonium salt: Add 2.0 ml of water and 20 drops of 10% sulfuric acid (H2SO4) to a 10 ml or 25 ml round bottom flask with spin bar. Cool the solution in an ice-water bath and stir. Add 1.0 mmole of the amine to be converted into a diazonium salt. Note: if your amine is a liquid, you can assume that one drop weighs about 0.03 g (30 mg). If the spin bar does not stir sufficiently, periodically stir with your spatula to break up clumps. Let the solution stir at 0 o C for 10 minutes. While the above solution is cooling, prepare a solution of 80 mg of sodium nitrite in 1 ml of water. Add the sodium nitrite solution dropwise to the reaction mixture (a color change may occur). Let this solution stir at 0 o C for 15 minutes. Step 2--Addition of the activated aromatic compound: Add 1.0 mmole of the aromatic amine or phenol to the diazonium salt solution. Stir at 0 o C for minutes (There may be a color change). If the solid does not mix well by the spin bar action stir with your spatula. If necessary, periodically shake to help mixing. The solution will slowly turn color over time**. At the end of minutes at 0 o C let the solution stir at room temperature for 20 minutes. **If your activated aromatic is an amine the color formation may not be sufficient due to protonation of the amine at low ph of the solution. To remedy this slowly add a solution of 150 mg of sodium acetate dissolved in 1.0 ml water (make sure this solution is cooled to 0 o C before adding). If the ph is still too low and color has not improved slowly add 1 M NaOH dropwise until the solution becomes neutral (or just basic). You may see a strong color change with the addition of base. If time permits you may want to let the reaction stir longer in order to insure completion of the reaction. Step 3. Dye color dependence on ph When step 2 is complete you want to analyze the color of your dye depending on the ph of the solution. Measure the ph of your solution and note the color. Take about 5 drops of the solution and place it in a test tube and add either 1 ml of 1M NaOH or 1 ml 1 M HCl to change the ph from either acidic to basis or visa versa. There may be a dramatic color change. Step 4. TLC Prepare a TLC chromatography chamber using 95% methylene chloride, 5% methanol and 2-3 drops of acetic acid as a solvent system Obtain a TLC plate (silica gel) and spot your dye reaction mixture, 1 cm from the bottom of the plate (you and your partner can use the same TLC plate). The reaction mixture should be concentrated enough that you need spot only once and make the smallest spot possible. Develop the plate until the solvent level rises to about 1-2 cm from the top. Step 5. Isolation of the solid dye. Take about ¼ of the dye mixture (1-2 ml) and set it aside for part B (dyeing fabric). To the remainder of the solution cool your dye mixture on ice to precipitate (this may take a while). Once solid has formed filter the solution. Wash the filtered solid with ice water. (NOTE --see next paragraph if you didn t get any solid). Scrape the isolated solid onto a watch glass and let it dry until next period or attempt to recrystallize using water, ethanol or acetone as solvent. You may have to experiment around a bit to find the best system. You could also try a mixed solvent crystallization (see section pg 667 of PLKE) using ethanol and water.
5 If you didn t isolate a solid from in the previous step, pour the colored solution into a beaker. Let the beaker stand uncovered in your drawer. Solid dye will crystallize over time. SAVE THE SOLID DYE THAT FORMS!--Later in the quarter we will try to create paint from your solid dye by incorporating it into either Gum Arabic or Linseed oil. PROCEDURE #2 Part A. Synthesis of Azo Dye Step 1--Formation of the diazonium salt: Add 2.0 ml of water and 20 drops of 10% sulfuric acid (H2SO4) to a 10 ml round bottom flask with spin bar. Add 1.0 mmole of the amine to be converted into a diazonium salt. Note: if your amine is a liquid, you can assume that one drop weighs about 0.03 g (30 mg). If the amine does not dissolve gently heat the mixture until it does. Once dissolved cool the solution in an ice-water bath and let the solution stir at 0 o C for 10 minutes. Upon cooling the amine may or may not precipitate but in either case proceed to step #2 While the above solution is cooling, prepare a solution of 80 mg of sodium nitrite in 1 ml of water. Add the sodium nitrite solution dropwise to the reaction mixture. A color change may occur and the solution may become clear or remain as a suspension. Let this solution/suspension stir at 0 o C for minutes. Step 2--Addition of the activated aromatic compound If your activated aromatic is an amine dissolve 1.0 mmole of the amine in 2.0 ml of acetic acid in a 25 ml round bottoms flask with spin bar. If you activated aromatic is a phenol dissolve the phenol in 2.0 ml of 1 M NaOH in a 25 ml round bottoms flask with spin bar Cool the activated aromatic solution to 0 o C. Once cooled, add the diazonium salt solution/suspension prepared in step 1, in small portions to your activated aromatic solution. Continue to stir at 0 o C during the addition. There may be a color change at this point**. Once all of the diazonium salt solution has been added let the solution stir at room temperature for 20 minutes. **If your activated aromatic is an amine the color formation may not be sufficient due to protonation of the amine at low ph of the solution. To remedy this slowly add a solution of 150 mg of sodium acetate dissolved in 1.0 ml water. If the ph is still too low and color has not improved slowly add 1 M NaOH dropwise until the solution becomes neutral (or just basic). You may see a strong color change with the addition of base. If time permits you may want to let the reaction stir longer in order to insure completion of the reaction. Step 3. Dye color dependence on ph When step 2 is complete you want to analyze the color of your dye depending on the ph of the solution Measure the ph of your solution and note the color. Take about 5 drops of the solution and place it in a test tube and add either 2 ml of 1M NaOH or 2 ml 1 M HCl to change the ph from either acidic to basis or visa versa. There may be a dramatic color change. Step 4. TLC Prepare a TLC chromatography chamber using 95% methylene chloride, 5% methanol and 2-3 drops of acetic acid as a solvent system Obtain a TLC plate (silica gel) and spot your dye reaction mixture, 1 cm from the bottom of the plate (you and your partner can
6 use the same TLC plate). The reaction mixture should be concentrated enough that you need spot only once and make the smallest spot possible. Develop the plate until the solvent level rises to about 1-2 cm from the top. Step 5. Isolation of the solid dye. Take about ¼ of the dye mixture (1-2 ml) and set it aside for part B (dyeing fabric). To the remainder of the solution add 0.5 grams of sodium chloride and cool your dye mixture on ice to precipitate (this may take a while). Once solid has formed filter the solution. Wash the filtered solid with ice water. (NOTE --see next paragraph if you didn t get any solid). Scrape the isolated solid onto a watch glass and let it dry until next period or attempt to recrystallize using water, ethanol or acetone as solvent. You may have to experiment around a bit to find the best system. You could also try a mixed solvent crystallization (see section pg 667 of PLKE) using ethanol and water. If you didn t isolate a solid from in the previous step, pour the colored solution into a beaker. Let the beaker stand uncovered in your drawer. Solid dye will crystallize over time. SAVE THE SOLID DYE THAT FORMS!--Later in the quarter we will try to create paint from your solid dye by incorporating it into either Gum Arabic or Linseed oil. Part B Dying of Fabric (this is the same for both procedure #1 and #2) Take the dye solution saved from step #5 in part A. Dilute this dye solution with ml of distilled water. Obtain a piece of multibanded fabric and submerge the fabric into the dye solution and gently heat on a hot plate for minutes (cover with a watch glass to avoid evaporation). Once you are done heating, rinse with water and leave the cloth in your drawer. In some cases the dye color and intensity will change once the fabric has dried out. Possible Modifications: 1.Isolating the dye early, before it decomposes. Many of the dyes seem to get worse the longer they reaction. Try stopping the reaction at a good color by perhaps cooling it on a dry ice bath (see 2 below) and then quickly filtering. 2.Isolation of the solid dye. If you dye doesn t precipitate by cooling, add sodium chloride ( grams) to the solution & cool. This may salt out your dye product. Also try cooling the solution in an ice bath with sodium choride added this will lower the temp by about 10 C. You could also try a dry ice bath for cooling (dry ice in acetone to get -78 C! 3. Recrystallization of your Dye: Try and get extra pure dye by recyrstallizing it using water, ethanol or acetone as solvent. You may have to experiment around a bit to find the best system. You could also try a mixed solvent crystallization (see section pg 667 of PLKE) using ethanol and water. Getting pure dye product you will receive 1-3 extra credit points. 4. Solvent effect of color: Once you have isolated a solid dye, dissolved it in different solvents (acetone, methanol, water, methylene chloride) and note the color variation. 5. Anything else you can think of do.
SYNTHESIS OF AN AZO DYE revisited (1 or 2 credits)
SYNTHESIS OF AN AZO DYE revisited (1 or 2 credits) This lab you can revisit the fist experiment of this quarter and synthesize more azo dyes of your choice. The old procedure is given below followed by
More information2. Synthesis of Aspirin
This is a two-part laboratory experiment. In part one, you will synthesize (make) the active ingredient in aspirin through a reaction involving a catalyst. The resulting product will then be purified through
More informationExperiment 17 Preparation of Methyl Orange
Experiment 17 Preparation of Methyl range In this experiment you will prepare methyl orange, an azo dye that forms beautiful orange crystals and is used as an acid-base indicator (Figure 17.1). The anion
More informationSynthesis of Benzoic Acid
E x p e r i m e n t 5 Synthesis of Benzoic Acid Objectives To use the Grignard reagent in a water free environment. To react the Grignard reagent with dry ice, CO 2(s). To assess the purity of the product
More informationArenediazonium Ions in Organic Synthesis: Para Red and para-iodonitrobenzene
Arenediazonium Ions in Organic Synthesis: Para Red and para-iodonitrobenzene Background An arenediazonium salt will be prepared from para-nitroaniline and used in two different reactions with iodide ion
More informationLab 2. Go Their Separate Ways: Separation of an Acid, Base, and Neutral Substance by Acid-Base Extraction
Lab 2. Go Their Separate Ways: Separation of an Acid, Base, and Neutral Substance by Acid-Base Extraction How can I use an acid-base reaction to separate an acid-base-neutral mixture? Objectives 1. use
More informationTo understand concept of limiting reagents. To learn how to do a vacuum filtration. To understand the concept of recrystallization.
E x p e r i m e n t Synthesis of Aspirin Experiment : http://genchemlab.wordpress.com/-aspirin/ objectives To synthesize aspirin. To understand concept of limiting reagents. To determine percent yield.
More information18. Arene Diazonium Ion Reactions
18. Arene Diazonium Ion Reactions A. Introduction In the previous laboratory experiment, you explored the functionalization of benzene via electrophilic aromatic substitution reactions. In these reactions,
More informationCHEMISTRY Organic Chemistry Laboratory II Spring 2019 Lab #3: Friedel-Crafts Acylation
CHEMISTRY 244 - Organic Chemistry Laboratory II Spring 2019 Lab #3: Friedel-Crafts Acylation Purpose: In this lab you will predict and experimentally test the directing effects of substituent groups in
More informationNucleophilic displacement - Formation of an ether by an S N 2 reaction The Williamson- Ether Synthesis
Nucleophilic displacement - Formation of an ether by an S N 2 reaction The Williamson- Ether Synthesis Bond formation by use of an S N 2 reaction is very important for organic and biological synthesis.
More informationPREPARATIVE TASK GRAND PRIX CHIMIQUE PETNICA SCIENCE CENTER, VALJEVO, SERBIA 9 TH -14 TH OCTOBER 2017
GRAND PRIX CHIMIQUE PETNICA SCIENCE CENTER, VALJEVO, SERBIA 9 TH -14 TH OCTOBER 2017 PREPARATIVE TASK Preparation of p-nitroacetanilide Preparation of vanillyl alcohol SUPPORTED BY Serbian Chemical Society
More informationExtraction. weak base pk a = 4.63 (of ammonium ion) weak acid pk a = 4.8. weaker acid pk a = 9.9. not acidic or basic pk a = 43
Extraction Background Extraction is a technique that separates compounds (usually solids) based on solubility. Depending on the phases involved, extractions are either liquid-solid or liquid-liquid. If
More information6. Extraction. A. Background. (a) (b) (c) Figure 1. Mixing of Solvents
6. Extraction A. Background Extraction is a frequently used technique to selectively transfer a compound of interested from one solvent to another. Extraction is based on solubility characteristics of
More informationExperiment 1: The Borohydride Reduction of 9-Fluorenone to 9-Fluorenol
Experiment 1: The Borohydride Reduction of 9-Fluorenone to 9-Fluorenol Background: In this week s experiment, a metal hydride will be used as a reducing agent. Metal hydrides can be quite reactive, and
More informationCHEM 322: Azo Dyes: Combinatorial Synthesis of Dyes
CEM 322: Azo Dyes: Combinatorial Synthesis of Dyes Introduction: Compounds containing one or more azo groups (-=- linked to two carbon atoms) have a variety of uses. Aliphatic azo compounds, like azobisisobutyronitrile
More informationMengying Li.
Investigating the Techniques of Acid- Base Extraction by separating three dye compounds & Recrystallization by purifying Methyl Orange Mengying Li Department of Chemical Engineering, The Pennsylvania State
More information6. Extraction. A. Background. (a) (b) (c) Figure 1. Mixing of Solvents
6. Extraction A. Background Extraction is a frequently used technique to selectively transfer a compound of interested from one solvent to another. Extraction is based on solubility characteristics of
More informationGRIGNARD REACTION Synthesis of Benzoic Acid
1 GRIGNARD REACTION Synthesis of Benzoic Acid In the 1920 s, the first survey of the acceleration of chemical transformations by ultrasound was published. Since then, many more applications of ultrasound
More informationExperiment 1: Extraction and Thin Layer Chromatography
Experiment 1: Extraction and Thin Layer Chromatography Introduction: Chromatography is a useful tool in chemistry and can be very helpful in determining the composition of an unknown sample. In chromatography
More informationExperiment V: Multistep Convergent Synthesis: Synthesis of Hexaphenylbenzene
Experiment V: Multistep Convergent Synthesis: Synthesis of Hexaphenylbenzene 1) Introduction CH H Thiamine HCl (V-02) ah (aq) Cu(Ac) 2 H 4 3 HAc V-01 V-03 V-04 Me 3 + H - V-05 V-06 Tetraphenylcyclopentadieneone
More informationFlushing Out the Moles in Lab: The Reaction of Calcium Chloride with Carbonate Salts
Flushing Out the Moles in Lab: The Reaction of Calcium Chloride with Carbonate Salts Pre-lab Assignment: Reading: 1. Chapter sections 3.3, 3.4, 3.7 and 4.2 in your course text. 2. This lab handout. Questions:
More informationChlorobenzene from Aniline via the Sandmeyer Reaction. August 21, By ParadoxChem126. Introduction
Chlorobenzene from Aniline via the Sandmeyer Reaction August 21, 2014 By ParadoxChem126 Introduction Chlorobenzene is a useful chemical in organic syntheses. It dissolves a wide range of organic compounds,
More informationCHEMISTRY Organic Chemistry Laboratory II Spring 2019 Lab #2: Grignard Reaction: Preparation of Triphenylmethanol
CHEMISTRY 244 - Organic Chemistry Laboratory II Spring 2019 Lab #2: Grignard Reaction: Preparation of Triphenylmethanol Purpose. In this lab you will use the Grignard Reaction, a classic reaction in organic
More informationGeneral Chemistry I CHEM-1030 Laboratory Experiment No. 2 Physical Separation Techniques
General Chemistry I CHEM-1030 Laboratory Experiment No. 2 Physical Separation Techniques Introduction When two or more substances that do not react chemically are blended together, the components of the
More informationExperiment 8 Synthesis of Aspirin
Experiment 8 Synthesis of Aspirin Aspirin is an effective analgesic (pain reliever), antipyretic (fever reducer) and anti-inflammatory agent and is one of the most widely used non-prescription drugs. The
More informationLab #3 Reduction of 3-Nitroacetophenone
Lab #3 Reduction of 3-Nitroacetophenone Introduction: Extraction: This method uses a different technique in which the two chemical compounds being separated are in immiscible solvents, also known as phases.
More informationThe Synthesis of Triphenylmethano. will synthesize Triphenylmethanol, a white crystalline aromatic
HEM 333L rganic hemistry Laboratory Revision 2.0 The Synthesis of Triphenylmethano ol In this laboratory exercise we will synthesize Triphenylmethanol, a white crystalline aromatic compound. Triphenylmethanol
More informationLab #6: CARBOXYLIC ACIDS LAB
lab Lab #6: CARBOXYLIC ACIDS LAB Name PART I: Preparation of Carboxylic Acids (a) Oxidation of an Aldehyde by Oxygen from the Air: Benzaldehyde is an aromatic aldehyde with a familiar odor. On a clean,
More informationLisa Barton CHEM 2312 Organic Chemistry Performed: 2/4/12. Synthesis of Aspirin
Lisa Barton CHEM 2312 rganic Chemistry Performed: 2/4/12 Synthesis of Aspirin bjective: The goal of this experiment is to synthesize Aspirin (Acetylsalicylic Acid) from the reaction of Salicylic acid and
More informationAP Chemistry Lab #5- Synthesis and Analysis of Alum (Big Idea 1 & 2)
www.pedersenscience.com AP Chemistry Lab #5- Synthesis and Analysis of Alum (Big Idea 1 & 2) 1.A.1: Molecules are composed of specific combinations of atoms; different molecules are composed of combinations
More informationEXPERIMENT #1 SEPARATION AND RECOVERY OF ORGANIC COMPOUNDS, THIN LAYER CHROMATOGRAPHY, COLUMN CHROMATOGRAPHY, CRYSTALLIZATION AND MELTING POINTS
EXPERIMENT #1 SEPARATION AND RECOVERY OF ORGANIC COMPOUNDS, THIN LAYER CHROMATOGRAPHY, COLUMN CHROMATOGRAPHY, CRYSTALLIZATION AND MELTING POINTS Overview In the first few weeks of this semester you will
More informationExperiment 7: Synthesis of an Alkyne from an Alkene
Experiment 7: Synthesis of an Alkyne from an Alkene Part A: Synthesis of meso-stilbene dibromide Part B: Synthesis of diphenylacetylene Reading: Carey & Guiliano Ch. 9 pgs 368-372 Note: This is exp #8
More informationEster Synthesis And Analysis: Aspirin and Oil of Wintergreen. Vanessa Jones November 19, 2015 Thursday 8:30 Lab Section Lab Partner: Melissa Blanco
Ester Synthesis And Analysis: Aspirin and Oil of Wintergreen Vanessa Jones November 19, 2015 Thursday 8:30 Lab Section Lab Partner: Melissa Blanco INTRODUCTION For this lab, students attempted to synthesize
More informationEXPERIMENT: LIMITING REAGENT. NOTE: Students should have moles of reactants in DATASHEET converted into masses in grams prior to the lab period.
Revised 12/2015 EXPERIMENT: LIMITING REAGENT Chem 1104 Lab NOTE: Students should have moles of reactants in DATASHEET converted into masses in grams prior to the lab period. INTRODUCTION Limiting reactant
More informationAspirin Lab By Maya Parks Partner: Ben Seufert 6/5/15, 6/8/15
Aspirin Lab By Maya Parks Partner: Ben Seufert 6/5/15, 6/8/15 Abstract: This lab was performed to synthesize acetyl salicylic acid or aspirin from a carboxylic acid and an alcohol. We had learned in class
More informationUniversity of Wisconsin Chemistry 116 Preparation and Characterization of Aspirin and Some Flavoring Esters *
University of Wisconsin Chemistry 116 Preparation and Characterization of Aspirin and Some Flavoring Esters * Esters are an important class of organic compounds commonly prepared via a condensation reaction
More informationSynthesizing Alum Reaction yields and green chemistry
Synthesizing Alum Reaction yields and green chemistry Introduction Aluminum cans are often recycled to make more aluminum products. In this experiment, you will synthesize a compound called alum, starting
More informationThe Friedel-Crafts Reaction: 2-(4-methylbenzoyl)benzoic acid
The Friedel-Crafts Reaction: 2-(4-methylbenzoyl)benzoic acid Exp t 63 from K. L. Williamson, Macroscale and Microscale rganic Experiments, 2nd Ed. 1994, Houghton Mifflin, Boston. p449 revised 10/13/98
More informationSYNTHESIS OF 1-BROMOBUTANE Experimental procedure at macroscale (adapted from Williamson, Minard & Masters 1 )
SYNTHESIS OF 1-BROMOBUTANE Experimental procedure at macroscale (adapted from Williamson, Minard & Masters 1 ) Introduction 1-bromobutane is a primary alkyl halide (primary alkyl) and therefore it is produced
More informationExperiment 12: Grignard Synthesis of Triphenylmethanol
1 Experiment 12: Grignard Synthesis of Triphenylmethanol Reactions that form carbon-carbon bonds are among the most useful to the synthetic organic chemist. In 1912, Victor Grignard received the Nobel
More informationNitration of Methyl Benzoate
Nitration of Methyl Benzoate Johnson, Chad Philip; T/Th Lab, 8:00am Submitted February 23 rd, 2012 Introduction Benzene containing compounds are known to have special properties that cause them to react
More informationRecovery of Copper Renee Y. Becker Manatee Community College
Recovery of Copper Renee Y. Becker Manatee Community College Introduction In this lab we are going to start with a sample of copper wire. We will then use a sequence of reactions to chemically transform
More informationPHYSICAL CONSTANTS: MELTING POINTS, BOILING POINTS, DENSITY
CRYSTALLIZATION: PURIFICATION OF SOLIDS ANSWERS TO PROBLEMS: 1. (a) (b) (c) (d) A plot similar to line A in Figure 5.1 on page 559 will be obtained. The line will be slightly curved. All of the substance
More informationDATE: Friday February 18 th Experiment #3 (A) : p - acetotoluidide. TITLE: PABA and its Chemistry RESULTS: p toludine
DATE: Friday February 18 th 2011 Experiment #3 (A) : p - acetotoluidide TITLE: PABA and its Chemistry RESULTS: p toludine mass of container (g) = 1.0888 mass of container and sample (g) = 3.1923 mass of
More informationAcid-Base Extraction
Experiment: Acid-Base Extraction Background information on the theory of extraction is covered extensively online and will also be covered in your discussion The information here pertains specifically
More informationSodium Borohydride Reduction of Benzoin
Sodium Borohydride Reduction of Benzoin Introduction The most common and useful reducing agents for reducing aldehydes, ketones, and other functional groups are metal hydride reagents. The two most common
More informationExperiment 9: Synthesis and Isolation of Optical Isomers of a Cobalt (III) Compound CH3500: Inorganic Chemistry, Plymouth State University
Experiment 9: Synthesis and Isolation of Optical Isomers of a Cobalt (III) Compound CH3500: Inorganic Chemistry, Plymouth State University Adapted from GS Girolami, TB Rauchfuss, RJ Angelici, "Experiment
More information18 Macroscale and Microscale Organic Experiments
360465-P01[01-024] 10/17/02 16:16 Page 18 Sahuja Ahuja_QXP_03:Desktop Folder:17/10/02: 18 Macroscale and Microscale Organic Experiments Preparing a Laboratory Record Use the following steps to prepare
More informationExperiment 3: Preparation of Lidocaine
Experiment 3: Preparation of Lidocaine This two-step synthesis involves the following conversion: 2,6-dimethylaniline α- chloro-2, 6-dimethylacetanilide Lidocaine. This synthetic scheme is shown in equation
More informationExperiment 7 - Preparation of 1,4-diphenyl-1,3-butadiene
Experiment 7 - Preparation of 1,4-diphenyl-1,3-butadiene OBJECTIVE To provide experience with the Wittig Reaction, one of the most versatile reactions available for the synthesis of an alkene. INTRODUCTION
More informationExp t 111 Structure Determination of a Natural Product
Exp t 111 Adapted by R. Minard, K. Smereczniak and Jon Landis (Penn State Univ.) from a microscale procedure used by the University of California, Irvine, in its undergraduate labs. The procedure is based
More informationExperiment 17. Synthesis of Aspirin. Introduction
Experiment 17 Introduction Synthesis of Aspirin Aspirin (acetylsalicylic acid) is a synthetic organic derived from salicylic acid. Salicylic acid is a natural product found in the bark of the willow tree
More informationPhenol Synthesis Part II
Phenol Synthesis Part II Assistant Lecturer Sahar Mohammed Shakir Assistant Lecturer Abdul Hafeedh Hameed In a beaker contains 50 ml of H2O, Add carefully 7.5 ml of H 2 SO 4 then add 7.5 ml of aniline
More informationExperiment 2 Solvent-free Aldol Condensation between 3,4-dimethoxybenzaldehyde and 1-indanone
Experiment 2 Solvent-free Aldol Condensation between 3,4-dimethoxybenzaldehyde and 1-indanone Chemical Concepts Carbonyl chemistry, base catalyzed aldol reaction, melting point, recrystallization Green
More informationExperiment 1: Preparation of Vanillyl Alcohol
Experiment 1: Preparation of Vanillyl Alcohol INTRDUCTIN A common method for preparing alcohols is the reduction of aldehydes to form primary alcohols [equation (1)] or of ketones to produce secondary
More informationMulti-step Synthesis: Preparation of Organic Dyes *
OpenStax-CNX module: m15877 1 Multi-step Synthesis: Preparation of Organic Dyes * Mary McHale This work is produced by OpenStax-CNX and licensed under the Creative Commons Attribution License 2.0 1 Multi-step
More informationMeasuring Enthalpy Changes
Measuring Enthalpy Changes PURPOSE To observe changes in enthalpy in chemical processes. GOALS To identify exothermic and endothermic processes. To relate enthalpy changes and entropy changes to changes
More informationAspirin Synthesis H 3 PO 4
Aspirin Synthesis Experiment 10 Aspirin is the common name for the compound acetylsalicylic acid, widely used as a fever reducer and as a pain killer. Salicylic acid, whose name comes from Salix, the willow
More informationor a chemical change in several experimental trials.
Regular Chemistry Lab Chemical and Physical Changes. Intro: As we study matter, we base most of our classification and identification of pure substances on chemical and physical properties. A physical
More informationPrelab Reading Assignment: Laboratory Techniques in Organic Chemistry, 4 th Ed. Chapter 19
CHEM 213 Technique Experiments Experiment 5: Column Chromatography Number of labs - one Reactions performed None Chemicals used: Fluorene-fluorenone mixture, hexanes, methylene chloride, silica gel Supplies
More informationChemistry 216. First Exam (March 16, 2010) (1 hr 15 min, 80 points) Dr. Kyoung Moo Koh. Lab section. GSI name. Name Please print.
Chemistry 216 First Exam (March 16, 2010) (1 hr 15 min, 80 points) Dr. Kyoung Moo Koh Lab section GSI name Name Please print Signature Student ID# I 8 II 10 III 6 IV 12 V 12 VI 10 VII 14 VIII 8 Total 80
More informationIGCSE(A*-G) Edexcel - Chemistry
IGCSE(A*-G) Edexcel - Chemistry Principles of Chemistry Atoms NOTES 1.8 Describe and explain experiments to investigate the small size of particles and their movement including: Dilution of coloured solutions
More informationHonors Cup Synthetic Proposal
onors Cup Synthetic Proposal Section: 270-V Group Members: Azhar Carim, Ian Cross, Albert Tang Title: Synthesis of indigo from -(2-bromoethyl)-2-nitrobenzamide Introduction: Indigo has been used as a dye
More informationAnnals of West University of Timisoara
Annals of West University of Timisoara Series Chemistry 13 (1) (2004) 27-32 SYNTHESIS IN NON-AQUEOUS MEDIUM OF SOME SYMMETRICAL DISAZO DIRECT DYES DERIVED FROM 4,4 -DIAMINOSTILBENE-2,2 -DISULPHONIC ACID
More informationAn Efficient Total Synthesis and Absolute Configuration. Determination of Varitriol
An Efficient Total Synthesis and Absolute Configuration Determination of Varitriol Ryan T. Clemens and Michael P. Jennings * Department of Chemistry, University of Alabama, 500 Campus Dr. Tuscaloosa, AL
More informationPART II: ANALYSIS OF IRON COORDINATION COMPOUND
PART II: ANALYSIS OF IRON COORDINATION COMPOUND In this experiment students will perform two independent analyses of the iron coordination compound synthesized in Part I. A redox titration with potassium
More information12BL Experiment 7: Vanillin Reduction
12BL Experiment 7: Vanillin Reduction Safety: Proper lab goggles/glasses must be worn (even over prescription glasses). WEAR GLOVES and please handle the following chemicals with care: Hydrochloric acid
More informationNatural and Synthetic Polymers: The Preparation of Nylon OBJECTIVES PRELABORATORY QUESTIONS
Natural and Synthetic Polymers: 7 The Preparation of Nylon OBJECTIVES 1. To learn some distinctions between natural and synthetic polymers. 2. To examine the monomers of two common fibers. 3. To become
More informationPage 2. Name. 1 2 (racemate) 3 4 (racemate) Answer: lowest R f. highest R f % completion solvent front. 50% completion
Page 2. Name I. (4 points) In connection with our research directed at probing the molecular mechanism of chemical carcinogenesis, we carried out a series of synthetic reactions shown below. Arrange these
More informationNaBr, H2SO4 CH3CH2CH2CH2Br + NaHSO4 + H2O. 1-Bromobutane bp C den MW n 1.439
Exp t 140 The SN2 Reaction: 1-Bromobutane from K. L. Williamson, Macroscale and Microscale Organic Experiments, 2nd Ed. 1994, Houghton Mifflin, Boston. p247; revised 2/22/02 Prelab Exercise: Review the
More information12AL Experiment 9: Markovnikov s Rule
12AL Experiment 9: Markovnikov s Rule Safety: Proper lab goggles/glasses must be worn (even over prescription glasses). WEAR GLOVES this lab utilizes hydrogen peroxide which can burn your skin and multiple
More informationCH 241 EXPERIMENT #6 WEEK OF NOVEMBER 12, NUCLEOPHILIC SUBSTITUTION REACTIONS (S N 1 and S N 2)
C 241 EXPERIMENT #6 WEEK OF NOVEMBER 12, 2001 NUCLEOPILIC SUBSTITUTION REACTIONS (S N 1 and S N 2) Background By the time you do this experiment we should have covered nucleophilic substitution reactions
More informationAcids and Bases. How does ph affect biological solutions? Introduction. Prelab Preparation Review Section 2.3 on acids and bases in your textbook.
Acids and Bases How does ph affect biological solutions? Learning Objectives To relate the ph scale to how acidic or basic a solution is. To explain how a buffer affects the ph of a solution. Process Objectives
More informationStudies of a Precipitation Reaction
Studies of a Precipitation Reaction Prelab Assignment Read the entire lab. Write an objective and any hazards associated with this lab in your laboratory notebook. Answer the following 6 questions in your
More informationMulti-Step Synthesis of Betaine-30
Multi-Step Synthesis of Betaine-30 Background information & Introduction The synthesis I chose for this multi-step project is synthesis of Betaine- 30, is also know as 2,6-diphenyl-4-(2,4,6-triphenylpyridinio)-phenolate,
More informationExperiment 4 Stoichiometry: The Reaction of Iron with Copper(II) Sulfate
CEAC 105 GENERAL CHEMISTRY Experiment 4 Stoichiometry: The Reaction of Iron with Copper(II) Sulfate Purpose: To enhance the understanding of stoichiometry, a reaction between iron and copper (II) sulfate
More informationReview Experiments Formation of Polymers Reduction of Vanillin
Review Experiments Formation of Polymers What is a polymer? What is polymerization? What is the difference between an addition polymerization and a condensation polymerization? Which type of polymerization
More information2 (CH 3 CH 2 ) 2 NH diethylamine
Experiment: (Part B) Preparation of Lidocaine from α-chloro-2,6-dimethylacetanilide and Diethylamine ITRDUCTI This step of the synthesis involves the reaction of α-chloro-2, 6- dimethylacetanilide, prepared
More informationEXPERIMENT THREE THE CANNIZARO REACTION: THE DISPROPORTIONATION OF BENZALDEHYDE
EXPERIMENT THREE THE CANNIZARO REACTION: THE DISPROPORTIONATION OF BENZALDEHYDE H C O HO C O H H C OH KOH 2x + DISCUSSION In planning the laboratory schedule, it should be observed that this experiment
More informationExperiment 3. Condensation Reactions of Ketones and Aldehydes: The Aldol Condensation Reaction.
Experiment 3. Condensation Reactions of Ketones and Aldehydes: The Aldol Condensation Reaction. References: Brown & Foote, Chapters 16, 19, 23 INTRODUCTION: This experiment continues the saga of carbon-carbon
More informationGRAVIMETRIC ANALYSIS OF A CHLORIDE SALT. REFERENCES: Nelson, J., Chemistry: The Central Science, 3 rd edition, Prentice-Hall, 1985
1 GRAVIMETRIC ANALYSIS OF A CHLORIDE SALT REFERENCES: Nelson, J., Chemistry: The Central Science, 3 rd edition, Prentice-Hall, 1985 Typical techniques used in gravimetric analyses by quantitatively determining
More informationChem 111 Lab: Iron Oxalate Preparation Page A-1 3 H 2 O. Carbon Iron. Figure 3 The iron-containing ion Fe(C 2
Chem 111 Lab: Iron xalate Preparation Page A-1 GRWING CRYSTALS THE SYNTHESIS F PTASSIUM TRISXALATFERRATE(III) TRIHYDRATE K 3 ] 3 H 2 The purpose of this experiment is to synthesize that is, to prepare
More informationMinneapolis Community and Technical College. Separation of Components of a Mixture
Minneapolis Community and Technical College Chemistry Department Chem1020 Separation of Components of a Mixture Objectives: To separate a mixture into its component pure substances. To calculate the composition
More information2/22/2019 NEW UNIT! Chemical Interactions. Atomic Basics #19
NEW UNIT! Chemical Interactions Atomic Basics #19 1 Vocabulary: Matter: Anything that has mass and takes up space. Atom: the smallest particle of matter. Element: A pure substance made up of only one type
More informationORG1 Syntheses of Acetaminophen and Aspirin
RG1 Syntheses of Acetaminophen and Aspirin Estimated Time Required: 60 minutes Introduction Ethanoylation (better known as acetylation) is the introduction of an acetyl functional group onto a suitable
More informationAcid-Base Titration Acetic Acid Content of Vinegar
Acid-Base Titration Acetic Acid Content of Vinegar Prelab Assignment Read the entire lab. Write an objective and any hazards associated with this lab in your laboratory notebook. On a separate sheet of
More informationExperiment # 13 PREPARATION OF ASPIRIN
Experiment # 13 PREPARATION OF ASPIRIN Objective In this experiment you will synthesize acetyl salicylic acid (aspirin), determine the limiting reagent, and then determine the theoretical and percent yields
More informationWorking in the Chemistry Laboratory
Working in the Chemistry Laboratory Accelerated Chemistry I Introduction: One of the most important components of your chemistry course is the laboratory experience. Perhaps you have done experiments in
More informationLAB #6 Chromatography Techniques
LAB #6 Chromatography Techniques Objectives: To learn how to story board a procedure Explain how a chromatograph of pigments is formed from both paper and thin layer chromatography. Isolate and identify
More informationCHEMISTRY Organic Chemistry Laboratory II Spring 2019 Lab #1: Oxidation of Alcohols to Ketones - Borneol Oxidation (2 weeks)
CHEMISTRY 244 - Organic Chemistry Laboratory II Spring 2019 Lab #1: Oxidation of Alcohols to Ketones - Borneol Oxidation (2 weeks) Purpose. In this lab you will learn about oxidation reactions in organic
More informationTOSYLHYDRAZONE CLEAVAGE OF AN α,β-epoxy KETONE; OXIDATIVE KMnO 4 CLEAVAGE OF AN ALKYNE EXPERIMENT A
1 EXPERIMENT A EPOXIDATION OF AN α,β-unsaturated KETONE; TOSYLYDRAZONE CLEAVAGE OF AN α,β-epoxy KETONE; OXIDATIVE KMnO 4 CLEAVAGE OF AN ALKYNE The goal of this experiment is the correct assignment of the
More informationExpt 9: The Aldol Condensation
Expt 9: The Aldol Condensation INTRDUCTIN Reactions that form carbon-carbon bonds are particularly important in organic chemistry as they allow the synthesis of more complex structures from simpler molecules.
More informationOrganic Chemistry Lab Student Questions about Single and Double Unknown Analyses (Extra Credit)
Organic Chemistry Lab Student Questions about Single and Double Unknown Analyses (Extra Credit) Preparation for the Experiments During these single unknown and double experiments, are we allowed to ask
More informationChemistry 1B Experiment 17 89
Chemistry 1B Experiment 17 89 17 Thermodynamics of Borax Solubility Introduction In this experiment, you will determine the values of H and S for the reaction which occurs when borax (sodium tetraborate
More informationThe Grignard Reaction: Synthesis of 1,2-diphenyl-1,2-propanediol via a Diastereoselective Reaction.
EXPERIMENT 2 The Grignard Reaction: Synthesis of 1,2-diphenyl-1,2-propanediol via a Diastereoselective Reaction. Relevant sections in the text: Fox & Whitesell, 3 rd Ed. pg. 400-404, 615-618 General Concepts
More informationChromatography Extraction and purification of Chlorophyll CHM 220
INTRODUCTION Extraction and purification of naturally occurring molecules is of the most common methods of obtaining organic molecules. Locating and identifying molecules found in flora and fauna can provide
More informationChem 2115 Experiment #10. Acids, Bases, Salts, and Buffers
Chem 2115 Experiment #10 Acids, Bases, Salts, and Buffers OBJECTIVE: The goal of this series of experiments is to investigate the characteristics of acidic and basic solutions. We will explore the neutralization
More informationCH O 2 2 H 2 O + CO 2
Name: Partners name: Laboratory 9: Types of Chemical Reactions 1. Lab Quiz 12 2. What are the different types of reactions? 3. What influences the rate of reactions? 4. Do reactions always go one way?
More informationExperiment Eight Acids and Bases
Name: Lab Section: Experiment Eight Acids and Bases Objective Identifying and understanding the nature of acids and bases is an important part of the laboratory toolbox, the purpose of this lab is to help
More informationChapter No. 2 EXPERIMENTAL TECHNIQUES IN CHEMISTRY SHORT QUESTIONS WITH ANSWERS Q.1 Define analytical chemistry? The branch of chemistry which deals with the qualitative and quantitative analyses of sample
More information