PREDICTION OF ACOUSTIC NATURAL FREQUENCIES FOR TWO DIMENSIONAL SIMPLIFIED AIRCRAFT CABIN BY IMPEDANCE MOBILITY COMPACT MATRIX (IMCM) APPROACH
|
|
- Shanna Ferguson
- 6 years ago
- Views:
Transcription
1 PREDICION OF ACOUSIC NAURAL FREQUENCIES FOR WO DIMENSIONAL SIMPLIFIED AIRCRAF CABIN BY IMPEDANCE MOBILIY COMPAC MARIX (IMCM) APPROACH Veerabhadra REDDY 1 ; Venkatesham B 2 1 Department of Mechanical and Aerospace Engineering, II Hyderabad, India 2 Department of Mechanical and Aerospace Engineering, II Hyderabad, India ABSRAC Prediction of modal characteristics of acoustic cavities with irregular shapes is an important topi c in vibro-acoustic analysis of systems. In this paper, proposed method of impedance and mobility compact matrix (IMCM) provided the approach of Integro Modal Method (IMM) in the matrix form for prediction of modal characteristics of acoustical cavities with irregular shape. his method, consists of discretizing the whole cavity into a series of sub cavities either regular or irregular cavities. Acoustic pressure in regular sub cavities has been decomposed over a modal basis and for irregular sub cavities over that of bounding surface. Continuity of both pressure and velocity between adjacent sub cavities is ensured using a membrane with zero mass and stiffness. he objective of this method is to develop a physical basis rather than a numerical approach. Mathematical formulation of the method for acoustic cavities with irregular shape has been explained in detail. Predicted natural frequencies of the simplified aircraft cabin based on the proposed method have been compared with the available results in the literature. Keywords: Impedance, mobility, vibro-acoustic analysis I-INCE Classification of Subjects Number: INRODUCION Prediction of modal characteristics of acoustic cavities with irregular shapes is an important issue in vibro-acoustic analysis of systems. Modal characteristics include natural frequencies, modal pressure and velocity of the particles of the medium. Analytical expressions available to calculate natural frequencies and mode shapes of cavities are limited to regular and simple geometries, such as rectangular and cylindrical cavities. In literature methods available for prediction of modal characteristics of cavities with arbitrary shape, are limited. hese methods include Finite element method (FEM), (1, 2), Acousto Elastic Method (AEM) (3), Green s function method (GFM) (4), and Integro Modal Method (IMM) (5). FEM is very popular and widely used for prediction of acoustic natural frequencies of arbitrary geometries; however it needs large number of degrees of freedom and computational time. AEM depends on the irregularity of the cavity shape. GFM is limited to a cavity slightly distorted from a regular one. IMM provides a combined approach of AEM and GFM retaining the advantages of both the methods. his method consists of discretising the whole cavity into a series of subcavities, whose acoustic pressure is decomposed either over a modal basis of regular subcavities or over that of bounding cavities in the case of irregular-shaped boundaries. An integral formulation is then established to ensure continuity of both pressure and velocity between adjacent subcavities using a membrane with zero mass and stiffness (5). E. Anyunzoghe and L. Cheng (6, 7) improved the integro-modal approach developed previously, and introduced the technique of overlapped cavities for better convergence of pressure gradient in the vicinity of the junctions between subcavities. S. M Kim and M. J Brennan (8) presented a compact matrix formulation for the steady-state analysis of vibroacoustic system. It is based on the Impedance and mobility approach using the uncoupled mobility of the structure and uncoupled acoustic impedance, both in modal coordinate systems. his method is very effective for investigating coupling between structural and acoustic systems. B. Venkatesham et al. (9) presented free vibration analysis of coupled acoustic-structural systems. 1 me13p1005@iith.ac.in 2 venkatesham@iith.ac.in 5526
2 In this paper an alternative approach; impedance and mobility compact matrix (IMCM) method is presented for prediction of acoustic modal characteristics of irregular cavities. Mathematical formulation and generalization of the method for acoustic cavities with irregular shape has been explained in detail. A standard Eigen value problem is then established. Numerical results are then presented and discussed. 2. IMPEDANCE AND MOBILIY COMPAC MARIX MEHOD (IMCM) he mathematical formulation consists in treating an irregular shaped cavity as a combination of connected sub-cavities separated by elastic panels. In each sub-cavity, sound pressure P can be calculated using Kirchhoff s Helmholtz integral (5). G( 2 P + λ 2 P)dv = P( 2 G + λ 2 G)dv + (G P G P n n ) ds (1) V V where λ is the wave number; n the outward normal vector of the boundary surface S b of the enclosure with volume V; G is the Green s function corresponding to a transfer function obtained between an observation point (r) and the source point (r 0 ). Green s function G, for interior cavities in terms of mode shapes can be written as (10) G(r, r 0 ) = c2 φ n (r)φ n (r 0 ) (ω 2 n ω 2 (2) )Λ n n Where c is the speed of the sound in the internal medium, ω n is the angular resonance frequency of the cavity, φ n the corresponding mode shape and S b Λ n is the acoustic mass of the cavity. 2 Λ n = φ n (r)dv (3) v Figure 1. Shows a typical irregular cavity and for the illustration purpose, the formulation is first developed for the cavity shown in Figure 1(a). As shown in Figure 1. he cavity investigated can be divided into a regular (Figure 1(b).) and an irregular (Figure 1(c).) subcavity. he junction between the two subcavities is replaced by a virtual vibrating membrane with zero mass and stiffness. a) Junction n n b) c) Figure -1. Discretization procedure a) Real Cavity b) Regular Subcavity c) Irregular Subcavity 2.1 Regular Subcavity In the case of a regular-shaped cavity, analytical expressions are available for the mode shapes and the natural frequencies. ypical examples are rectangular, cylindrical, or semi-cylindrical enclosures. he acoustic pressure P(r, ω) and the vibration velocity of the panel u(r, ω) are 5527
3 described by (8) N P(r, ω) = φ n (r) a n (ω) = Φ a (4) n=1 M u(r, ω) = ψ m (r)b m (ω) = Ψ b (5) m=1 where, n ( consisting of n x, n y ) is a acoustic and m is a structural index, the N length column vectors and a consists of array of uncoupled acoustic mode shape function for the rigid wall cavities amplitude of the acoustic pressure mode a n (ω) Ψ Φ φ n (r), and respectively. Similarly the M length column vectors and b consists of array of uncoupled vibration mode shape functions of the membraneψ m (r), and the uncoupled amplitude of the vibration velocity modes b m (ω) respectively. he amplitude of the nth acoustic mode in regular cavities is given by (8); M a n (ω) = ρ 0 c 2 V A n (ω) (q n + C n,m. b m (ω)) (6) where q n is the generalised acoustic source strength, ρ 0 is density of air, V is volume of the cavity and C n,m represents the geometrical coupling relationship between the uncoupled structural and acoustic mode shape functions on the surface of the vibrating membrane m=1 S f and is given by C n,m = φ n (r) ψ m (r)ds (7) S f Assuming damping is negligible A n (ω) = jω ω n 2 ω 2 (8) he modal acoustic pressure vector a can be expressed as a = Z a (q + q s ) (9) where q is the N length modal source strength vector and q s = Cb is the modal source strength vector due to vibration of the structure and Z a is the uncoupled acoustic modal impedance matrix. he vibration amplitude of the mth mode is expressed as (8) b m (ω) = N 1 B ρ s hs m (ω) c n,m a n (ω) (10) f In the above equation external force is assumed to be zero. ρ s is the density, h is the thickness and S f is the area of the of the vibration membrane. B m (ω) is the structural mode resonance term for the imaginary junction vibration membrane and assumed to be unity. he modal vibration amplitude vector b can be expressed as b = Y s g a (11) where g a = C a is the modal force vector acting on the acoustic system. Y s is the (M M) n=1 diagonal matrix defined as the uncoupled structural modal mobility matrix and is given by Y s = 1 Λ s Λ s = ψ m (r) 2 ds (12) S f 2.2 Irregular Subcavity An irregular shaped subcavity is deviation from regular shape as shown in Figure 1(c). In this the procedure consists of enclosing the irregular cavity by a regular one, called the enveloping or bounding cavity for which modal information is available. Since the natural modes of the irregular 5528
4 shaped cavity are not known analytically, the modes of the bounding cavity are used to obtain the pressure. he amplitude of the nth acoustic mode in irregular cavities is given by a n (ω) = ρ 2 0 c 0 jω V ω 2 n ω 2 (q n + C n,m. b m (ω) M m=1 1 an jω Λ n,n ) (13) n V, ω n, and acoustic mass Λ n belong to the bounding cavity. n,n is the spatial coupling between the t nth and n th acoustic modes of the bounding cavity S d and is given by φ n n,n = φ n ds (14) S d n d In the Eq. (14). Integration is performed over the surface of the irregular cavity, either analytically or numerically. Any irregularity of the boundary shape has the effect of coupling the acoustic modes of its envelope. 2.3 Generalization of the formulation In order to generalize the procedure, four subcavity systems is taken as shown in Figure 2. Middle cavities have two membranes one each on its left (L) and right (R) sides. End cavities have one membrane either left or right side. L R Figure -2. Four subcavity system Applying Eqs. (6, 10) to each subcavity k (k =1, 2, 3, 4) and assuming q = 0 a k = Z ak (C k b k ) k=1, 4 (15) a k = Z ak (C k L b K L + C k R b K R ) k=2, 3 (16) b k = Y sk C k a k k=1, 2, 3,4 (17) o ensure continuity of pressure on both sides of the membranes the following equations are imposed R b k = b k+1 k=1 (18) b L R k = b k+1 k=2, 3 (19) L b k 1 = b k k=4 (20) he above Eqs. (15 to 20) on simplification and assuming = λ, can be rearranged in to the following form (λ 2 [M] + λ[l] + [S])X = 0 (21) where = {a n (ω)}. n n MatricesM, L, and S are given below. o convert Eq. (21) in to standard eigen value problem, Y = λx is assumed and the same is rearranged as 0 I [ M 1 S M 1 L ] {X Y } = λ {X Y } (22) where AZ = λz (23) 0 I A = [ M 1 S M 1 L ], and Z = {X Y } 5529
5 Λ sk Λ nk 0 ω 2 nk Λ sk Λ nk 0 M = [ ], L = [ ] and 0 Λ sk Λ nk 0 ω 2 nk Λ sk Λ nk C k C k 0 S = [ C k C k 1 C k C k ] 0 C k C k 1 0 On solving Eq. (23). Imaginary values of λ 2π are the natural frequencies of the cavity 3. Results and Discussions 3.1 Regular Subcavity A simplified rectangular cavity is used to test the method. he dimensions of the rectangular cavity considered are Lx X Ly=2.0 X1.1 m; hree subcavities with five acoustic and structural modes (n x = n y =5, m=5) is used to validate the results. he dimensions of the three cavities Lx 1 =0.5, Lx 2 =1.05, Lx 3 =0.45 and Ly 1 = Ly 2 = Ly 3 =1.1. he connecting zero mass and stiffness membrane is located at x 1 =0.5 and x 2 =1.55. he mode shapes for membrane and bounding cavities are taken as ψ m (y) = sin ( mπy L y ) (24) φ n (x, y) = cos ( n xπx (L x ) cos ( n yπy L y ) (25) able 1. Natural frequencies of the rectangular cavity calculated with ICMM S. No Mode order Exact Solution (Hz) IMM (Hz) ICMM (Hz) % of Deviation of IMCM results from the exact solution 1 (1,0) (0,1) (2,0) (1,1) (2,1) (3,0) (3,1) (0,2) (1,2) (4,0)
6 able 1 shows the calculated natural frequencies of rectangular cavity using IMCM method. Results obtained from IMCM method are compared with exact solution and IMM results. he calculated results match well with exact solution and IMM results and the deviation is less than 3% at all modes. he convergence of the results to the exact solution improves with increasing number of cavities, number of acoustic and membrane modes. 3.2 Irregular Sub-cavity A simplified two-dimensional aircraft cabin with floor is considered as shown in Figure 3. he dimensions of the simplified cabin θ=49 0 and radius =1 m; wo subcavities with five acoustic and structural modes (n x = n y =5, m=5) is used to validate the results. he dimensions of the two cavities Lx 1 =0.66 m, Lx 2 =1 m and Ly 1 = Ly 2 = 2 m. he connecting zero mass and stiffness membrane is located at x 1 =0.66 m. he mode shapes for membrane and bounding cavities are taken same as shown in Eqs. (23 to 24) θ Figure- 3. Irregular cavity (Simplified two-dimensional aircraft cabin) able 2 below shows the calculated natural frequencies of simplified aircraft cabin with floor using IMCM method. Results obtained from IMCM method are compared with IMM results. he calculated results match well with IMM results and the deviation is less than 5% at all modes. he convergence of the results to the exact solution improves with increasing number of cavities, number of acoustic and membrane modes. 5531
7 able 2. Natural frequencies of the irregular cavity calculated with ICMM Mode order FE Analysis Frequency (Hz) IMM (Hz) ICMM (Hz) % of Deviation of IMCM results from the IMM CONCLUSIONS A new approach has been proposed for the computation of acoustic modes of irregular shaped cavities. he method approximates the solution via impedance and mobility formulation using multi-connected subcavities. he formulation is general and flexible enough to handle different cavity configurations. his method calculates the natural frequencies accurately even when few acoustic modes of the bounding cavity are considered. Future work is required to extend this approach to the prediction of interior noise inside irregular shaped cavities with vibrating structures. REFERENCES 1. Petyt M, Lea J, Koopmann GH. A finite element method for determining the acoustic modes of irregular shaped cavities. Journal of Sound and Vibration Apr 22; 45(4): Joppa PD, Fyfe IM. A finite element analysis of the impedance properties of irregular shaped cavities with absorptive boundaries. Journal of Sound and Vibration Jan 8; 56(1): Dowell EH, Gorman GF, Smith DA. Acoustoelasticity: general theory, acoustic natural modes and forced response to sinusoidal excitation, including comparisons with experiment. Journal of Sound and vibration Jun 22; 52(4): Morse PM, Feshbach H. Methods of theoretical physics, Vol-II, New York; Mc-GrawHill. 5. Missaoui J, Cheng L. A combined integro-modal approach for predicting acoustic properties of irregular-shaped cavities. he Journal of the Acoustical Society of America Jun 1;101(6): Anyunzoghe E, Cheng L. Improved integro-modal approach with pressure distribution assessment and the use of overlapped cavities. Applied Acoustics Nov 30; 63(11): Anyunzoghe E, Cheng L. On the extension of the integro-modal approach. Journal of sound and vibration Aug 8; 255(2): Kim SM, Brennan MJ. A compact matrix formulation using the impedance and mobility approach for the analysis of structural-acoustic systems. Journal of Sound and Vibration May 27; 223(1): Venkatesham B, iwari M, Munjal ML. Free vibration analysis of coupled acoustic structural systems. IISC Centenary-International Conference on Advances in Mechanical Engineering (IC-ICAME); July 2-4; Bangalore, India. 10. Morse PM, Ingard KU. heoretical acoustics. Princeton university press;
Transfer-matrix-based approach for an eigenvalue problem of a coupled rectangular cavity
ransfer-matrix-based approach for an eigenvalue problem of a coupled rectangular cavity Hiroyuki IWAMOO ; Nobuo ANAKA Seikei University, Japan okyo Metropolitan University, Japan ABSRAC his study concerns
More informationVibro-acoustic analysis of a rectangular-like cavity with a tilted wall
Applied Acoustics 68 (007) 739 751 wwwelseviercom/locate/apacoust Vibro-acoustic analysis of a rectangular-like cavity with a tilted wall YY Li 1, L Cheng * Department of Mechanical Engineering, The Hong
More informationBOUNDARY CONDITION FOR THE ACOUSTIC IMPEDANCE OF LIGHTWEIGHT MICRO PERFORATED PANELS AND MEMBRANES
BOUNDARY CONDITION FOR THE ACOUSTIC IMPEDANCE OF LIGHTWEIGHT MICRO PERFORATED PANELS AND MEMBRANES Chenxi Li, Ben Cazzolato and Anthony Zander School of Mechanical Engineering, The University of Adelaide,
More informationNoise in enclosed spaces. Phil Joseph
Noise in enclosed spaces Phil Joseph MODES OF A CLOSED PIPE A 1 A x = 0 x = L Consider a pipe with a rigid termination at x = 0 and x = L. The particle velocity must be zero at both ends. Acoustic resonances
More informationEFFECTS OF PERMEABILITY ON SOUND ABSORPTION AND SOUND INSULATION PERFORMANCE OF ACOUSTIC CEILING PANELS
EFFECTS OF PERMEABILITY ON SOUND ABSORPTION AND SOUND INSULATION PERFORMANCE OF ACOUSTIC CEILING PANELS Kento Hashitsume and Daiji Takahashi Graduate School of Engineering, Kyoto University email: kento.hashitsume.ku@gmail.com
More informationMicro-perforates in vibro-acoustic systems Li CHENG
Micro-perforates in vibro-acoustic systems Li CHENG Chair Professor and Director Consortium for Sound and Vibration research Department of Mechanical Engineering The Hong Kong Polytechnic University CAV
More informationSimplified modelling of vehicle interior noise: comparison of analytical, numerical and experimental approaches
Loughborough University Institutional Repository Simplified modelling of vehicle interior noise: comparison of analytical, numerical and experimental approaches This item was submitted to Loughborough
More informationLaboratory synthesis of turbulent boundary layer wall-pressures and the induced vibro-acoustic response
Proceedings of the Acoustics 22 Nantes Conference 23-27 April 22, Nantes, France Laboratory synthesis of turbulent boundary layer wall-pressures and the induced vibro-acoustic response C. Maury a and T.
More informationNUMERICAL PREDICTION OF PERFORATED TUBE ACOUSTIC IMPEDANCE
NUMERICAL PREDICTION OF PERFORATED TUBE ACOUSTIC IMPEDANCE G. Pradeep, T. Thanigaivel Raja, D.Veerababu and B. Venkatesham Department of Mechanical and Aerospace Engineering, Indian Institute of Technology
More informationProceedings of Meetings on Acoustics
Proceedings of Meetings on Acoustics Volume 19, 13 http://acousticalsocietyorg/ ICA 13 Montreal Montreal, Canada - 7 June 13 Architectural Acoustics Session paab: Dah-You Maa: His Contributions and Life
More informationInvestigation of Passive Control Devices for Potential Application to a Launch Vehicle Structure to Reduce the Interior Noise Levels During Launch
Investigation of Passive Control Devices for Potential Application to a Launch Vehicle Structure to Reduce the Interior Noise Levels During Launch Report for Stage 4 Tasks 1 and 2 July 24 Prepared For:
More informationModal analysis of an enclosure acoustic space based on spectro-geometric method
INTER-NOISE 6 Modal analysis of an enclosure acoustic space based on spectro-geometric method Xianjie SHI ; Chunli LI ; Fengjun WANG 3 ; Wen L LI 4 Institute of Systems Engineering, China Academy of Engineering
More informationThe sound power output of a monopole source in a cylindrical pipe containing area discontinuities
The sound power output of a monopole source in a cylindrical pipe containing area discontinuities Wenbo Duan, Ray Kirby To cite this version: Wenbo Duan, Ray Kirby. The sound power output of a monopole
More informationFLINOVIA 2017, State Collage, USA. Dr. Alexander Peiffer, Dr. Uwe Müller 27 th -28 th April 2017
Review of efficient methods for the computation of transmission loss of plates with inhomogeneous material properties and curvature under turbulent boundary layer excitation FLINOVIA 2017, State Collage,
More informationA SIMPLE DECOUPLED MODAL CALCULATION OF SOUND TRANSMISSION BETWEEN VOLUMES
A SIMPLE DECOUPLED MODAL CALCULATION OF SOUND TRANSMISSION BETWEEN VOLUMES 43.40r Philippe JEAN; Jean-François RONDEAU Centre Scientifique et Technique du Bâtiment, 24 rue Joseph Fourier, 38400 Saint Martin
More informationAn indirect Trefftz method for the steady state dynamic analysis of coupled vibro acoustic systems
An indirect Trefftz method for the steady state dynamic analysis of coupled vibro acoustic systems W. Desmet, P. Sas, D. Vandepitte K.U. Leuven, Department of Mechanical Engineering, Division PMA Celestijnenlaan
More informationThis is the author s version of a work that was submitted/accepted for publication in the following source:
This is the author s version of a work that was submitted/accepted for publication in the following source: Lin, Tian Ran & Pan, Jie (29) Sound radiation characteristics of a box-type structure. Journal
More informationAn explicit time-domain finite-element method for room acoustics simulation
An explicit time-domain finite-element method for room acoustics simulation Takeshi OKUZONO 1 ; Toru OTSURU 2 ; Kimihiro SAKAGAMI 3 1 Kobe University, JAPAN 2 Oita University, JAPAN 3 Kobe University,
More informationMicrophone reciprocity calibration: acoustic field in the coupler
Microphone reciprocity calibration: acoustic field in the coupler Cécile Guianvarc h, Jean-Noël Durocher Laboratoire National d Essais, 29 av. Roger Hennequin, 78197 Trappes Cedex, France, e-mail: {cecile.guianvarch,
More informationA HYBRID WAVE BASED VIBRO-ACOUSTIC MODELLING TECHNIQUE FOR THE PREDICTION OF INTERIOR NOISE IN AN AIRCRAFT FUSELAGE
25th INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES A HYBRID WAVE BASED VIBRO-ACOUSTIC MODELLING TECHNIQUE FOR THE PREDICTION OF INTERIOR NOISE IN AN AIRCRAFT FUSELAGE B. Van Genechten, D. Vandepitte,
More informationIMPROVING THE ACOUSTIC PERFORMANCE OF EXPANSION CHAMBERS BY USING MICROPERFORATED PANEL ABSORBERS
Proceedings of COBEM 007 Copyright 007 by ABCM 9th International Congress of Mechanical Engineering November 5-9, 007, Brasília, DF IMPROVING THE ACOUSTIC PERFORMANCE OF EXPANSION CHAMBERS BY USING MICROPERFORATED
More informationEffect of effective length of the tube on transmission loss of reactive muffler
Effect of effective length of the tube on transmission loss of reactive muffler Gabriela Cristina Cândido da SILVA 1 ; Maria Alzira de Araújo NUNES 1 1 University of Brasilia, Brazil ABSTRACT Reactive
More informationAnalytical coupled vibroacoustic modeling of membranetype acoustic metamaterials: membrane model
Analytical coupled vibroacoustic modeling of membranetype acoustic metamaterials: membrane model Yangyang Chen and Guoliang Huang a) Department of Systems Engineering, University of Arkansas at Little
More informationA simple formula for insertion loss prediction of large acoustical enclosures using statistical energy analysis method
csnak, 014 Int. J. Nav. Archit. Ocean Eng. (014) 6:894~903 http://dx.doi.org/10.478/ijnaoe-013-00 pissn: 09-678, eissn: 09-6790 A simple formula for insertion loss prediction of large acoustical enclosures
More informationOptimization for heat and sound insulation of honeycomb sandwich panel in thermal environments
Optimization for heat and sound insulation of honeycomb sandwich panel in thermal environments Jinlong Yuan 1, Haibo Chen 2, Qiang Zhong 3, Kongjuan Li 4 Department of Modern mechanics, University of Science
More informationIntroduction to Acoustics Exercises
. 361-1-3291 Introduction to Acoustics Exercises 1 Fundamentals of acoustics 1. Show the effect of temperature on acoustic pressure. Hint: use the equation of state and the equation of state at equilibrium.
More informationERRATA AND ADDITIONS FOR "ENGINEERING NOISE CONTROL" 4th Edn. First printing April 23, 2018
ERRATA AND ADDITIONS FOR "ENGINEERING NOISE CONTROL" 4th Edn. First printing April 3, 08 p4, Eq..3 should not have the ± symbol on the RHS p36, 3 lines from the bottom of the page, replace cos b with cos
More informationPrediction of the radiated sound power from a fluid-loaded finite cylinder using the surface contribution method
Prediction of the radiated sound power from a fluid-loaded finite cylinder using the surface contribution method Daipei LIU 1 ; Herwig PETERS 1 ; Nicole KESSISSOGLOU 1 ; Steffen MARBURG 2 ; 1 School of
More informationChapter a. Spring constant, k : The change in the force per unit length change of the spring. b. Coefficient of subgrade reaction, k:
Principles of Soil Dynamics 3rd Edition Das SOLUTIONS MANUAL Full clear download (no formatting errors) at: https://testbankreal.com/download/principles-soil-dynamics-3rd-editiondas-solutions-manual/ Chapter
More informationNew Developments of Frequency Domain Acoustic Methods in LS-DYNA
11 th International LS-DYNA Users Conference Simulation (2) New Developments of Frequency Domain Acoustic Methods in LS-DYNA Yun Huang 1, Mhamed Souli 2, Rongfeng Liu 3 1 Livermore Software Technology
More informationNumerical Model of the Insertion Loss Promoted by the Enclosure of a Sound Source
Numerical Model of the Insertion Loss Promoted by the Enclosure of a Sound Source Gil F. Greco* 1, Bernardo H. Murta 1, Iam H. Souza 1, Tiago B. Romero 1, Paulo H. Mareze 1, Arcanjo Lenzi 2 and Júlio A.
More informationNUMERICAL ESTIMATION OF THE ABSORPTION COEFFICIENT OF FLEXIBLE MICRO-PERFORATED PLATES IN AN IMPEDANCE TUBE
23 rd International Congress on Sound & Vibration Athens, Greece -4 July 26 ICSV23 NUMERICAL ESTIMATION OF THE ABSORPTION COEFFICIENT OF FLEXIBLE MICRO-PERFORATED PLATES IN AN IMPEDANCE TUBE Muttalip Aşkın
More informationImproved Method of the Four-Pole Parameters for Calculating Transmission Loss on Acoustics Silence
7659, England, UK Journal of Information and Computing Science Vol., No., 7, pp. 6-65 Improved Method of the Four-Pole Parameters for Calculating Transmission Loss on Acoustics Silence Jianliang Li +,
More informationANALYSIS OF HIGHRISE BUILDING STRUCTURE WITH SETBACK SUBJECT TO EARTHQUAKE GROUND MOTIONS
ANALYSIS OF HIGHRISE BUILDING SRUCURE WIH SEBACK SUBJEC O EARHQUAKE GROUND MOIONS 157 Xiaojun ZHANG 1 And John L MEEK SUMMARY he earthquake response behaviour of unframed highrise buildings with setbacks
More informationTransactions on Modelling and Simulation vol 3, 1993 WIT Press, ISSN X
Boundary element method in the development of vehicle body structures for better interior acoustics S. Kopuz, Y.S. Unliisoy, M. Qali kan Mechanical Engineering Department, Middle East Technical University,
More informationω 0 = 2π/T 0 is called the fundamental angular frequency and ω 2 = 2ω 0 is called the
he ime-frequency Concept []. Review of Fourier Series Consider the following set of time functions {3A sin t, A sin t}. We can represent these functions in different ways by plotting the amplitude versus
More informationTransient response prediction of an impulsively excited structure using a scaling approach
Numerical Techniques (others): Paper ICA2016-668 Transient response prediction of an impulsively excited structure using a scaling approach Xianhui Li (a), Jing Zhang (b), Tuo Xing (c) (a) Beijing Municipal
More informationExamination of the Effect of a Sound Source Location on the Steady-State Response of a Two-Room Coupled System
ARCHIVES OF ACOUSTICS 36, 4, 761 775 (2011) DOI: 10.2478/v10168-011-0051-7 Examination of the Effect of a Sound Source Location on the Steady-State Response of a Two-Room Coupled System Mirosław MEISSNER
More informationStructural Matrices in MDOF Systems
in MDOF Systems http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano April 9, 2016 Outline Additional Static Condensation
More informationGuided convected acoustic wave coupled with a membrane wall used as noise reduction device
Buenos Aires 5 to 9 September, 016 Acoustics for the 1 st Century PROCEEDINGS of the nd International Congress on Acoustics Structural Acoustics and Vibration (others): Paper ICA016-516 Guided convected
More informationSound radiation of a plate into a reverberant water tank
Sound radiation of a plate into a reverberant water tank Jie Pan School of Mechanical and Chemical Engineering, University of Western Australia, Crawley WA 6009, Australia ABSTRACT This paper presents
More informationControl of Earthquake Induced Vibrations in Asymmetric Buildings Using Passive Damping
Control of Earthquake Induced Vibrations in Asymmetric Buildings Using Passive Damping Rakesh K. Goel, California Polytechnic State University, San Luis Obispo Abstract This paper summarizes the results
More informationIntroduction to Vibration. Professor Mike Brennan
Introduction to Vibration Professor Mie Brennan Introduction to Vibration Nature of vibration of mechanical systems Free and forced vibrations Frequency response functions Fundamentals For free vibration
More informationWojciech ŁAPKA, Czesław CEMPEL
ARCHIVES OF ACOUSTICS 33, 4 (Supplement), 65 70 (2008) COMPUTATIONAL AND EXPERIMENTAL INVESTIGATIONS OF A SOUND PRESSURE LEVEL DISTRIBUTION AT THE OUTLET OF THE SPIRAL DUCT Wojciech ŁAPKA, Czesław CEMPEL
More informationIMPROVED STRUCTURE-ACOUSTIC INTERACTION MODELS, PART II: MODEL EVALUATION Guseong-dong, Yuseong-gu, Daejeon Republic of Korea
ICSV14 Cairns Australia 9-12 July, 2007 IMPROVED STRUCTURE-ACOUSTIC INTERACTION MODELS, PART II: MODEL EVALUATION Abstract Moonseok Lee 1 *, Youn-Sik Park 1, Youngjin Park 1, K.C. Park 2 1 NOVIC, Department
More information1 Introduction. 2 Boundary Integral Equations
Analysis of sound transmission through a thin elastic plate by using boundary integral equations T. Terai*, Y. Kawai* "Department ofarchitecture, Faculty ofengineering, Kinki University, 1 Umenobe Takaya,
More informationBroadband Vibration Response Reduction Using FEA and Optimization Techniques
Broadband Vibration Response Reduction Using FEA and Optimization Techniques P.C. Jain Visiting Scholar at Penn State University, University Park, PA 16802 A.D. Belegundu Professor of Mechanical Engineering,
More informationSide branch resonators modelling with Green s function methods
Side branch resonators modelling with Green s function methods E. Perrey-Debain, R. Maréchal, J.-M. Ville Laboratoire Roberval UMR 6253, Equipe Acoustique, Université de Technologie de Compiègne, France
More informationTransmission Matrix Model of a Quarter-Wave-Tube with Gas Temperature Gradients
Transmission Matrix Model of a Quarter-Wave-Tube with Gas Temperature Gradients Carl Howard School of Mechanical Engineering, University of Adelaide, South Australia, Australia ABSTRACT A transmission
More informationMeasurement of Structural Intensity Using an Angular Rate Sensor
Measurement of Structural Intensity Using an Angular Rate Sensor Nobuaki OMATA 1 ; Hiroki NAKAMURA ; Yoshiyuki WAKI 3 ; Atsushi KITAHARA 4 and Toru YAMAZAKI 5 1,, 5 Kanagawa University, Japan 3, 4 BRIDGESTONE,
More informationDesign of Partial Enclosures. D. W. Herrin, Ph.D., P.E. University of Kentucky Department of Mechanical Engineering
D. W. Herrin, Ph.D., P.E. Department of Mechanical Engineering Reference 1. Ver, I. L., and Beranek, L. L. (2005). Control Engineering: Principles and Applications. John Wiley and Sons. 2. Sharp, B. H.
More informationStatistical Energy Analysis Software & Training Materials, Part II
Statistical Energy Analysis Software & Training Materials, Part II Tom Irvine Dynamic Concepts, Inc. NASA Engineering & Safety Center (NESC) 20-22 June 2017 The Aerospace Corporation 2010 The Aerospace
More informationPrediction of Light Rail Vehicle Noise in Running Condition using SEA
Prediction of Light Rail Vehicle Noise in Running Condition using SEA Sebastian PREIS ; Gérard BORELLO Siemens AG Austria Urban Transport, Austria InterAC, France ABSTRACT A complete Light Rail vehicle
More informationA reduced-order stochastic finite element analysis for structures with uncertainties
A reduced-order stochastic finite element analysis for structures with uncertainties Ji Yang 1, Béatrice Faverjon 1,2, Herwig Peters 1, icole Kessissoglou 1 1 School of Mechanical and Manufacturing Engineering,
More informationMETHODS OF THEORETICAL PHYSICS
METHODS OF THEORETICAL PHYSICS Philip M. Morse PROFESSOR OF PHYSICS MASSACHUSETTS INSTITUTE OF TECHNOLOGY Herman Feshbach PROFESSOR OF PHYSICS MASSACHUSETTS INSTITUTE OF TECHNOLOGY PART II: CHAPTERS 9
More informationEstimation of Acoustic Impedance for Surfaces Delimiting the Volume of an Enclosed Space
ARCHIVES OF ACOUSTICS Vol.37,No.1, pp.97 102(2012) Copyright c 2012byPAN IPPT DOI: 10.2478/v10168-012-0013-8 Estimation of Acoustic Impedance for Surfaces Delimiting the Volume of an Enclosed Space Janusz
More informationModelling sound radiation from a baffled vibrating plate for different boundary conditions using an elementary source technique
Modelling sound radiation from a baffled vibrating plate for different boundary conditions using an elementary source technique Azma PUTRA 1 ; Nurain SHYAFINA 1 ; David THOMPSON 2 ; Noryani MUHAMMAD 1
More informationMobility and Impedance Methods. Professor Mike Brennan
Mobility and Impedance Methods Professor Mike Brennan ibration control ibration Problem Understand problem Modelling (Mobility and Impedance Methods) Solve Problem Measurement Mobility and Impedance The
More informationAcoustic radiation by means of an acoustic dynamic stiffness matrix in spherical coordinates
Acoustic radiation by means of an acoustic dynamic stiffness matrix in spherical coordinates Kauê Werner and Júlio A. Cordioli. Department of Mechanical Engineering Federal University of Santa Catarina
More informationTransmission Matrix Model of a Quarter-Wave-Tube with Gas Temperature Gradients
Proceedings of Acoustics 2013 Victor Harbor Transmission Matrix Model of a Quarter-Wave-Tube with Gas Temperature Gradients Carl Howard School of Mechanical Engineering, University of Adelaide, South Australia,
More informationinter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering August 2000, Nice, FRANCE
Copyright SFA - InterNoise 2000 1 inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE I-INCE Classification: 7.6 AN INNOVATIVE APPROACH
More informationTRANSMISSION LOSS OF EXTRUDED ALUMINIUM PANELS WITH ORTHOTROPIC CORES
TRANSMISSION LOSS OF EXTRUDED ALUMINIUM PANELS WITH ORTHOTROPIC CORES PACS REFERENCE: 43.40-Rj RADIATION FROM VIBRATING STRUCTURES INTO FLUID MEDIA Names of the authors: Kohrs, Torsten; Petersson, Björn
More informationPrediction of high-frequency responses in the time domain by a transient scaling approach
Prediction of high-frequency responses in the time domain by a transient scaling approach X.. Li 1 1 Beijing Municipal Institute of Labor Protection, Beijing Key Laboratory of Environmental Noise and Vibration,
More informationSound radiation from the open end of pipes and ducts in the presence of mean flow
Sound radiation from the open end of pipes and ducts in the presence of mean flow Ray Kirby (1), Wenbo Duan (2) (1) Centre for Audio, Acoustics and Vibration, University of Technology Sydney, Sydney, Australia
More informationProceedings of Meetings on Acoustics
Proceedings of Meetings on Acoustics Volume 9, 2010 http://asa.aip.org 159th Meeting Acoustical Society of America/NOISE-CON 2010 Baltimore, Maryland 19-23 April 2010 Session 4aSA: Structural Acoustics
More informationTransmission Loss Assessment for a Muffler by Boundary Element Method Approach
ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XVII, NR. 1, 010, ISSN 1453-7397 Ovidiu Vasile Transmission Loss Assessment for a Muffler by Boundary Element Method Approach This paper investigates the
More informationSub-structuring of mechanical systems based on the path concept
Sub-structuring of mechanical systems based on the path concept Francesc Xavier MAGRANS 1 ; Jordi POBLET-PUIG 2 ; Antonio RODRÍGUEZ-FERRAN 3 1 Ingeniería para el Control del Ruido S.L., Spain 1,2,3 Universitat
More informationSHAKE TABLE STUDY OF SOIL STRUCTURE INTERACTION EFFECTS ON SEISMIC RESPONSE OF SINGLE AND ADJACENT BUILDINGS
13 th World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1-6, 2004 Paper No. 1918 SHAKE TABLE STUDY OF SOIL STRUCTURE INTERACTION EFFECTS ON SEISMIC RESPONSE OF SINGLE AND ADJACENT
More informationCSVR in Hong Kong PolyU
Research @ CSVR in Hong Kong PolyU Li Cheng ( Chair Professor and Head Director, Consortium for Sound and Vibration Research (CSVR) The Hong Kong Polytechnic University Department of Mechanical Engineering
More informationOutline. Structural Matrices. Giacomo Boffi. Introductory Remarks. Structural Matrices. Evaluation of Structural Matrices
Outline in MDOF Systems Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano May 8, 014 Additional Today we will study the properties of structural matrices, that is the operators that
More informationMODal ENergy Analysis
MODal ENergy Analysis Nicolas Totaro, Jean-Louis Guyader To cite this version: Nicolas Totaro, Jean-Louis Guyader. MODal ENergy Analysis. RASD, Jul 2013, Pise, Italy. 2013. HAL Id: hal-00841467
More informationINFLUENCE OF ROOM GEOMETRY ON MODAL DENSITY, SPATIAL DISTRIBUTION OF MODES AND THEIR DAMPING M. MEISSNER
ARCHIVES OF ACOUSTICS 30, 4 (Supplement), 203 208 (2005) INFLUENCE OF ROOM GEOMETRY ON MODAL DENSITY, SPATIAL DISTRIBUTION OF MODES AND THEIR DAMPING M. MEISSNER Institute of Fundamental Technological
More informationRadiated Sound Power from a Curved Honeycomb Panel
Radiated Sound Power from a Curved Honeycomb Panel Jay H. Robinson Ralph D. Buehrle Jacob Klos NASA Langley Research Center, Hampton, VA 23681-2199 Ferdinand W. Grosveld Lockheed Martin Engineering and
More informationAcoustic performance of industrial mufflers with CAE modeling and simulation
csnak, 214 Int. J. Nav. Archit. Ocean Eng. (214) 6:935~946 http://dx.doi.org/1.2478/ijnaoe-213-223 pissn: 292-6782, eissn: 292-679 Acoustic performance of industrial mufflers with CAE modeling and simulation
More informationPreprint. Vibro-acoustic response of flexible Micro-Perforated Plates: impact of the boundary condition at the perforation walls.
Vibro-acoustic response of flexible Micro-Perforated Plates: impact of the boundary condition at the perforation walls J. Tournadre, M. A. Temiz 2, P. Martínez-Lera 3, W. De Roeck, W. Desmet,4 KU Leuven,
More informationInternational Journal of Scientific & Engineering Research, Volume 5, Issue 7, July-2014 ISSN
ISSN 2229-5518 692 In literature, finite element formulation uses beam element or plate element for structural modelling which has a limitation on transverse displacement. Atkinson and Manrique [1] studied
More informationAnalytical Solution for a Fluid-Structure Interaction Problem in Comparison with Finite Element Solution
Analytical Solution for a Fluid-Structure Interaction Problem in Comparison with Finite Element Solution Amirhossein Keivani & Ahmad Shooshtari Ferdowsi University of Mashhad, Mashhad, Iran. Ahmad Aftabi
More informationA Modal Approach to Lightweight Partitions with Internal Resonators
A Modal Approach to Lightweight Partitions with Internal Resonators Steffen Hettler, Philip Leistner Fraunhofer-Institute of Building Physics, D-7569 Stuttgart, Nobelstrasse, Germany e-mail: hettler@ibp.fraunhofer.de,
More informationEffects of mass distribution and buoyancy on the sound radiation of a fluid loaded cylinder
Effects of mass distribution and buoyancy on the sound radiation of a fluid loaded cylinder Hongjian Wu, Herwig Peters, Roger Kinns and Nicole Kessissoglou School of Mechanical and Manufacturing, University
More informationSimulation of Acoustic and Vibro-Acoustic Problems in LS-DYNA using Boundary Element Method
10 th International LS-DYNA Users Conference Simulation Technolog (2) Simulation of Acoustic and Vibro-Acoustic Problems in LS-DYNA using Boundar Element Method Yun Huang Livermore Software Technolog Corporation
More informationCHAPTER 5 SIMULATION OF A PAYLOAD FAIRING
CHAPTER 5 SIMULATION OF A PAYLOAD FAIRING In the preceding chapters, a model of a PZT actuator exciting a SS cylinder has been presented. The structural model is based on a modal expansion formulation
More informationA 3 D finite element model for sound transmission through a double plate system with isotropic elastic porous materials
Acoustics and Vibrations Group Université de Sherbrooke, QC CANADA Département génie mécanique Université de Sherbrooke Sherbrooke, QC CANADA Tel.: (819) 821-7157 Fax: (819) 821-7163 A 3 D finite element
More informationProceedings of Meetings on Acoustics
Proceedings of Meetings on Acoustics Volume 19, 2013 http://acousticalsociety.org/ ICA 2013 Montreal Montreal, Canada 2-7 June 2013 Structural Acoustics and Vibration Session 2pSA: Memorial Session in
More informationAcoustic performance of a stretched membrane and porous blanket combination '
Acoustic performance of a stretched membrane and porous blanket combination ' W. A. Thomas, Jr. and C. J. Hurst Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061 (Received
More informationActive Impact Sound Isolation with Floating Floors. Gonçalo Fernandes Lopes
Active Impact Sound Isolation with Floating Floors Gonçalo Fernandes Lopes Outubro 009 Active impact sound isolation with floating floors Abstract The users of buildings are, nowadays, highly demanding
More informationMulti Degrees of Freedom Systems
Multi Degrees of Freedom Systems MDOF s http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano March 9, 07 Outline, a System
More informationCritical loss factor in 2-DOF in-series system with hysteretic friction and its use for vibration control
Critical loss factor in -DOF in-series system with hysteretic friction and its use for vibration control Roman Vinokur Acvibrela, Woodland Hills, CA Email: romanv99@aol.com Although the classical theory
More informationTransmission Loss of a Dissipative Muffler with Perforated Central Pipe
Transmission Loss of a Dissipative Muffler with Perforated Central Pipe 1 Introduction This example problem demonstrates Coustyx ability to model a dissipative muffler with a perforated central pipe. A
More informationChapter 23: Principles of Passive Vibration Control: Design of absorber
Chapter 23: Principles of Passive Vibration Control: Design of absorber INTRODUCTION The term 'vibration absorber' is used for passive devices attached to the vibrating structure. Such devices are made
More informationSound Radiation Of Cast Iron
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2002 Sound Radiation Of Cast Iron N. I. Dreiman Tecumseh Products Company Follow this and
More informationActive noise control in a pure tone diffuse sound field. using virtual sensing. School of Mechanical Engineering, The University of Adelaide, SA 5005,
Active noise control in a pure tone diffuse sound field using virtual sensing D. J. Moreau, a) J. Ghan, B. S. Cazzolato, and A. C. Zander School of Mechanical Engineering, The University of Adelaide, SA
More informationAnalogy Electromagnetism - Acoustics: Validation and Application to Local Impedance Active Control for Sound Absorption
Analogy Electromagnetism - Acoustics: Validation and Application to Local Impedance Active Control for Sound Absorption L. Nicolas CEGELY - UPRESA CNRS 5005 - Ecole Centrale de Lyon BP63-693 Ecully cedex
More informationSound radiation from nested cylindrical shells
Sound radiation from nested cylindrical shells Hongjian Wu 1 ; Herwig Peters 1 ; Nicole Kessissoglou 1 1 School of Mechanical and Manufacturing Engineering, UNSW Australia, Sydney NSW 252 ABSTRACT Fluid-loaded
More informationFREE VIBRATIONS OF FRAMED STRUCTURES WITH INCLINED MEMBERS
FREE VIBRATIONS OF FRAMED STRUCTURES WITH INCLINED MEMBERS A Thesis submitted in partial fulfillment of the requirements for the degree of Bachelor of Technology in Civil Engineering By JYOTI PRAKASH SAMAL
More informationThe use of microperforated plates to attenuate cavity resonances
The use of microperforated plates to attenuate cavity resonances Benjamin Fenech a Acoustic Technology, Ørsted DTU, Technical University of Denmark, Building 352, Ørsteds Plads, DK-2800 Kgs. Lyngby, Denmark
More informationAnalytical and experimental study of single frame double wall
Analytical and experimental study of single frame double wall C. Guigou-Carter and M. Villot Center for Building Science and Technology Acoustics and Lighting Department Paper ID 203 Analytical and experimental
More informationReduction in number of dofs
Reduction in number of dofs Reduction in the number of dof to represent a structure reduces the size of matrices and, hence, computational cost. Because a subset of the original dof represent the whole
More informationTheory and Practice of Rotor Dynamics Prof. Rajiv Tiwari Department of Mechanical Engineering Indian Institute of Technology Guwahati
Theory and Practice of Rotor Dynamics Prof. Rajiv Tiwari Department of Mechanical Engineering Indian Institute of Technology Guwahati Module - 7 Instability in rotor systems Lecture - 4 Steam Whirl and
More informationIntroduction to Vibration. Mike Brennan UNESP, Ilha Solteira São Paulo Brazil
Introduction to Vibration Mike Brennan UNESP, Ilha Solteira São Paulo Brazil Vibration Most vibrations are undesirable, but there are many instances where vibrations are useful Ultrasonic (very high
More informationSimulation of acoustic and vibroacoustic problems in LS-DYNA using boundary element method ABSTRACT:
Simulation of acoustic and vibroacoustic problems in LS-DYNA using boundary element method Yun Hang, Mhamed Souli, Rogelio Perez Livermore Software Technology Corporation USA & University of Lille Laboratoire
More information