Dr. D. Dinev, Department of Structural Mechanics, UACEG
|
|
- Dina McGee
- 5 years ago
- Views:
Transcription
1 Lecture 6 Energy principles Energy methods and variational principles Print version Lecture on Theory of Elasticity and Plasticity of Dr. D. Dinev, Department of Structural Mechanics, UACEG 6.1 Contents 1 Work and energy Work and energy Work and energy Work A material particle is moved from point A to point B by a force F The infinitesimal distance along the path from A to B is a displacement du The work dw performed by the force F is defined as dw = F du The work done is the product of the displacement and the force in the direction of the displacement The total work is B W = F du A 6.3 Work and energy Work 1
2 Work = Force Displacement Work and energy Energy The energy is the capacity to do work It is a measure of the capacity of all forces on a body to do work Work is performed on a body trough a change in energy The work done by forces on an elastic solid is stored inside the body in the form of a strain energy Consider the uniaxial tension test where the deformation increases slowly from zero to σ 6.6 The strain energy stored is equal to the work done on the differential element σ ( du = σd u + u ) σ 0 x dx dydz σdudydz 0 = σ 2 2E dxdydz 6.7 The strain energy density is the strain energy per unite volume U = du dxdydz = 1 2 σε 6.8 2
3 The strain energy is the shaded area under the stress-strain curve U = 1 2 σε 6.9 General expression for the strain energy U = 1 2 (σ xxε xx + σ yy ε yy + σ zz ε zz + 2σ xy ε xy + 2σ yz ε yz + 2σ zx ε zx ) = 1 2 σ i jε i j = 1 2 σ : ε The total strain energy is U T = 1 2 The potential of the applied forces is [ W P = σ : εd ] f ud + t uds S TPE functional Total potential energy of the body Π T PE = U T +W P = 1 2 σ : εd f ud t uds S 6.11 TPE functional The principle states that: The body is in equilibrium if there is an admissible displacement field u that makes the total potential energy a minimum δπ T PE (u) = 0 where δπ T PE is a variation of the functional Π T PE (u) The admissible displacement field is the one that satisfy the displacement BCs. Note The variational operator δ is much like the differential operator d except that it operates with respect to the dependent variable u rather than the independent variable x
4 TPE functional Local minimum of the TPE functional 6.13 The condition for minimum of a functional I(u) is δi = I u δu = 0 Almost the same as the condition for a minimum of a function u(x) du = u x dx = Consider a functional The minimum condition is δi(u) = b I(u) = F [ x,u(x),u (x) ] dx a b a ( x ) δx + δu + u u δu dx = 0 The integral can be manipulated to get the expression for the variation of u (integration by parts of the 3-rd addend) 6.15 The variation of the functional is δi(u) = b a [ u x ( )] u δudx The non-trivial solution gives u x ( ) u = 0 The above expression is called Euler equation
5 A more general 2D case is given by I(u,v) = F (x,y,u,v,u,x,v,x,...,v,yy ) The Euler equations are u + 2 x u,x y u,y x u,xx x y u + 2 x u,x y u,y x u,xx x y A + 2 u,xy y u,xy y 2 u,yy = 0 u,yy = Example Consider a cantilever beam with length of l and subjected to uniform load q. Using the principle of a minimum of TPE work out the equilibrium equation A lot of problems in elasticity there is no analytical solution of the field equations For such cases approximate solution schemes have been developed based on the variational formulation of the problem (i.e. the principle of minimum potential energy) The is based on the idea of constructing a series of trial approximating functions that satisfy the essential (displacement) BCs but not differential equations exactly Note Since the TPE functional includes the force BCs, it is require the trial solution satisfies only the displacement BCs! 6.19 Walter Ritz ( )
6 The original paper 6.21 The displacement can be expressed as u = u 0 + a 1 u 1 + a 2 u a n u n = u 0 + v = v 0 + b 1 v 1 + b 2 v b n v n = v 0 + n i=1 n i=1 n w = w 0 + c 1 w 1 + c 2 w c n w n = w 0 + a i u i b i v i i=1 c i w i The terms of u 0, v 0 and w 0 are chosen to satisfy any non-homogeneous displacement BCs and u i, v i and w i satisfy the corresponding homogeneous BCs These forms are not required to satisfy the stress BCs 6.22 These trial functions are chosen from the some combinations of elementary functions (polynomials, trigonometric or hyperbolic forms) The unknown coefficients a i, b i and c i are to be determined so as to minimize the TPE functional of the problem Thus we approximately satisfy the variational formulation of the problem Using this approximation the TPE functional will be a function of these unknown coefficients Π T PE = Π T PE (a i,b i,c i ) 6.23 The minimizing condition ca be expressed as a series of Π T PE a i = 0, Π T PE b i = 0, Π T PE c i = 0 This set forms a system of 3n equations which gives a i, b i and c i 6
7 Under suitable conditions on the choice of trial functions (completeness) the approximation will improve as the number of included terms is increased When the approximate displacement solution is obtained the strains and stresses can be calculated from the appropriate field equations Note The method is suitable to apply at problems involving one or two displacements (bars, beams, plates and shells) 6.24 Example Consider a bending of simply supported beam of length l carrying a uniform load q 6.25 The End Any questions, opinions, discussions?
Chapter 5 Structural Elements: The truss & beam elements
Institute of Structural Engineering Page 1 Chapter 5 Structural Elements: The truss & beam elements Institute of Structural Engineering Page 2 Chapter Goals Learn how to formulate the Finite Element Equations
More informationLecture 8. Stress Strain in Multi-dimension
Lecture 8. Stress Strain in Multi-dimension Module. General Field Equations General Field Equations [] Equilibrium Equations in Elastic bodies xx x y z yx zx f x 0, etc [2] Kinematics xx u x x,etc. [3]
More informationUnit 13 Review of Simple Beam Theory
MIT - 16.0 Fall, 00 Unit 13 Review of Simple Beam Theory Readings: Review Unified Engineering notes on Beam Theory BMP 3.8, 3.9, 3.10 T & G 10-15 Paul A. Lagace, Ph.D. Professor of Aeronautics & Astronautics
More informationChapter 3 Variational Formulation & the Galerkin Method
Institute of Structural Engineering Page 1 Chapter 3 Variational Formulation & the Galerkin Method Institute of Structural Engineering Page 2 Today s Lecture Contents: Introduction Differential formulation
More information3D Elasticity Theory
3D lasticity Theory Many structural analysis problems are analysed using the theory of elasticity in which Hooke s law is used to enforce proportionality between stress and strain at any deformation level.
More information12. Stresses and Strains
12. Stresses and Strains Finite Element Method Differential Equation Weak Formulation Approximating Functions Weighted Residuals FEM - Formulation Classification of Problems Scalar Vector 1-D T(x) u(x)
More informationReview of Strain Energy Methods and Introduction to Stiffness Matrix Methods of Structural Analysis
uke University epartment of Civil and Environmental Engineering CEE 42L. Matrix Structural Analysis Henri P. Gavin Fall, 22 Review of Strain Energy Methods and Introduction to Stiffness Matrix Methods
More informationChapter 5 Elastic Strain, Deflection, and Stability 1. Elastic Stress-Strain Relationship
Chapter 5 Elastic Strain, Deflection, and Stability Elastic Stress-Strain Relationship A stress in the x-direction causes a strain in the x-direction by σ x also causes a strain in the y-direction & z-direction
More informationExample 3.7 Consider the undeformed configuration of a solid as shown in Figure 3.60.
162 3. The linear 3-D elasticity mathematical model The 3-D elasticity model is of great importance, since it is our highest order hierarchical model assuming linear elastic behavior. Therefore, it provides
More informationUNIVERSITY OF SASKATCHEWAN ME MECHANICS OF MATERIALS I FINAL EXAM DECEMBER 13, 2008 Professor A. Dolovich
UNIVERSITY OF SASKATCHEWAN ME 313.3 MECHANICS OF MATERIALS I FINAL EXAM DECEMBER 13, 2008 Professor A. Dolovich A CLOSED BOOK EXAMINATION TIME: 3 HOURS For Marker s Use Only LAST NAME (printed): FIRST
More information2 Introduction to mechanics
21 Motivation Thermodynamic bodies are being characterized by two competing opposite phenomena, energy and entropy which some researchers in thermodynamics would classify as cause and chance or determinancy
More informationConsider an elastic spring as shown in the Fig.2.4. When the spring is slowly
.3 Strain Energy Consider an elastic spring as shown in the Fig..4. When the spring is slowly pulled, it deflects by a small amount u 1. When the load is removed from the spring, it goes back to the original
More informationMechanical Properties of Materials
Mechanical Properties of Materials Strains Material Model Stresses Learning objectives Understand the qualitative and quantitative description of mechanical properties of materials. Learn the logic of
More informationFinite Element Method in Geotechnical Engineering
Finite Element Method in Geotechnical Engineering Short Course on + Dynamics Boulder, Colorado January 5-8, 2004 Stein Sture Professor of Civil Engineering University of Colorado at Boulder Contents Steps
More informationSteps in the Finite Element Method. Chung Hua University Department of Mechanical Engineering Dr. Ching I Chen
Steps in the Finite Element Method Chung Hua University Department of Mechanical Engineering Dr. Ching I Chen General Idea Engineers are interested in evaluating effects such as deformations, stresses,
More information20. Rheology & Linear Elasticity
I Main Topics A Rheology: Macroscopic deformation behavior B Linear elasticity for homogeneous isotropic materials 10/29/18 GG303 1 Viscous (fluid) Behavior http://manoa.hawaii.edu/graduate/content/slide-lava
More informationMECh300H Introduction to Finite Element Methods. Finite Element Analysis (F.E.A.) of 1-D Problems
MECh300H Introduction to Finite Element Methods Finite Element Analysis (F.E.A.) of -D Problems Historical Background Hrenikoff, 94 frame work method Courant, 943 piecewise polynomial interpolation Turner,
More informationMechanics of materials Lecture 4 Strain and deformation
Mechanics of materials Lecture 4 Strain and deformation Reijo Kouhia Tampere University of Technology Department of Mechanical Engineering and Industrial Design Wednesday 3 rd February, 206 of a continuum
More informationMechanics PhD Preliminary Spring 2017
Mechanics PhD Preliminary Spring 2017 1. (10 points) Consider a body Ω that is assembled by gluing together two separate bodies along a flat interface. The normal vector to the interface is given by n
More informationMECH 5312 Solid Mechanics II. Dr. Calvin M. Stewart Department of Mechanical Engineering The University of Texas at El Paso
MECH 5312 Solid Mechanics II Dr. Calvin M. Stewart Department of Mechanical Engineering The University of Texas at El Paso Table of Contents Thermodynamics Derivation Hooke s Law: Anisotropic Elasticity
More informationThe Finite Element Method for the Analysis of Non-Linear and Dynamic Systems
The Finite Element Method for the Analysis of Non-Linear and Dynamic Systems Prof. Dr. Eleni Chatzi Dr. Giuseppe Abbiati, Dr. Konstantinos Agathos Lecture 1-21 September, 2017 Institute of Structural Engineering
More informationLecture 3: The Concept of Stress, Generalized Stresses and Equilibrium
Lecture 3: The Concept of Stress, Generalized Stresses and Equilibrium 3.1 Stress Tensor We start with the presentation of simple concepts in one and two dimensions before introducing a general concept
More informationModule 4 : Deflection of Structures Lecture 4 : Strain Energy Method
Module 4 : Deflection of Structures Lecture 4 : Strain Energy Method Objectives In this course you will learn the following Deflection by strain energy method. Evaluation of strain energy in member under
More informationAircraft Structures Kirchhoff-Love Plates
University of Liège erospace & Mechanical Engineering ircraft Structures Kirchhoff-Love Plates Ludovic Noels Computational & Multiscale Mechanics of Materials CM3 http://www.ltas-cm3.ulg.ac.be/ Chemin
More informationLecture M1 Slender (one dimensional) Structures Reading: Crandall, Dahl and Lardner 3.1, 7.2
Lecture M1 Slender (one dimensional) Structures Reading: Crandall, Dahl and Lardner 3.1, 7.2 This semester we are going to utilize the principles we learnt last semester (i.e the 3 great principles and
More informationCH.11. VARIATIONAL PRINCIPLES. Continuum Mechanics Course (MMC)
CH.11. ARIATIONAL PRINCIPLES Continuum Mechanics Course (MMC) Overview Introduction Functionals Gâteaux Derivative Extreme of a Functional ariational Principle ariational Form of a Continuum Mechanics
More information2 Introduction to mechanics
21 Motivation Thermodynamic bodies are being characterized by two competing opposite phenomena, energy and entropy which some researchers in thermodynamics would classify as cause and chance or determinancy
More informationStress, Strain, Mohr s Circle
Stress, Strain, Mohr s Circle The fundamental quantities in solid mechanics are stresses and strains. In accordance with the continuum mechanics assumption, the molecular structure of materials is neglected
More informationSEMM Mechanics PhD Preliminary Exam Spring Consider a two-dimensional rigid motion, whose displacement field is given by
SEMM Mechanics PhD Preliminary Exam Spring 2014 1. Consider a two-dimensional rigid motion, whose displacement field is given by u(x) = [cos(β)x 1 + sin(β)x 2 X 1 ]e 1 + [ sin(β)x 1 + cos(β)x 2 X 2 ]e
More information3 2 6 Solve the initial value problem u ( t) 3. a- If A has eigenvalues λ =, λ = 1 and corresponding eigenvectors 1
Math Problem a- If A has eigenvalues λ =, λ = 1 and corresponding eigenvectors 1 3 6 Solve the initial value problem u ( t) = Au( t) with u (0) =. 3 1 u 1 =, u 1 3 = b- True or false and why 1. if A is
More informationM5 Simple Beam Theory (continued)
M5 Simple Beam Theory (continued) Reading: Crandall, Dahl and Lardner 7.-7.6 In the previous lecture we had reached the point of obtaining 5 equations, 5 unknowns by application of equations of elasticity
More informationDue Monday, September 14 th, 12:00 midnight
Due Monday, September 14 th, 1: midnight This homework is considering the analysis of plane and space (3D) trusses as discussed in class. A list of MatLab programs that were discussed in class is provided
More informationBasic Energy Principles in Stiffness Analysis
Basic Energy Principles in Stiffness Analysis Stress-Strain Relations The application of any theory requires knowledge of the physical properties of the material(s) comprising the structure. We are limiting
More informationAdvanced Vibrations. Distributed-Parameter Systems: Exact Solutions (Lecture 10) By: H. Ahmadian
Advanced Vibrations Distributed-Parameter Systems: Exact Solutions (Lecture 10) By: H. Ahmadian ahmadian@iust.ac.ir Distributed-Parameter Systems: Exact Solutions Relation between Discrete and Distributed
More information7. Hierarchical modeling examples
7. Hierarchical modeling examples The objective of this chapter is to apply the hierarchical modeling approach discussed in Chapter 1 to three selected problems using the mathematical models studied in
More informationTentamen/Examination TMHL61
Avd Hållfasthetslära, IKP, Linköpings Universitet Tentamen/Examination TMHL61 Tentamen i Skademekanik och livslängdsanalys TMHL61 lördagen den 14/10 2000, kl 8-12 Solid Mechanics, IKP, Linköping University
More informationLecture 15 Strain and stress in beams
Spring, 2019 ME 323 Mechanics of Materials Lecture 15 Strain and stress in beams Reading assignment: 6.1 6.2 News: Instructor: Prof. Marcial Gonzalez Last modified: 1/6/19 9:42:38 PM Beam theory (@ ME
More informationIntroduction to Finite Element Method
Introduction to Finite Element Method Dr. Rakesh K Kapania Aerospace and Ocean Engineering Department Virginia Polytechnic Institute and State University, Blacksburg, VA AOE 524, Vehicle Structures Summer,
More informationAE/ME 339. Computational Fluid Dynamics (CFD) K. M. Isaac. Momentum equation. Computational Fluid Dynamics (AE/ME 339) MAEEM Dept.
AE/ME 339 Computational Fluid Dynamics (CFD) 9//005 Topic7_NS_ F0 1 Momentum equation 9//005 Topic7_NS_ F0 1 Consider the moving fluid element model shown in Figure.b Basis is Newton s nd Law which says
More informationLecture notes Models of Mechanics
Lecture notes Models of Mechanics Anders Klarbring Division of Mechanics, Linköping University, Sweden Lecture 7: Small deformation theories Klarbring (Mechanics, LiU) Lecture notes Linköping 2012 1 /
More informationThe Finite Element Method
The Finite Element Method 3D Problems Heat Transfer and Elasticity Read: Chapter 14 CONTENTS Finite element models of 3-D Heat Transfer Finite element model of 3-D Elasticity Typical 3-D Finite Elements
More informationTwo Posts to Fill On School Board
Y Y 9 86 4 4 qz 86 x : ( ) z 7 854 Y x 4 z z x x 4 87 88 Y 5 x q x 8 Y 8 x x : 6 ; : 5 x ; 4 ( z ; ( ) ) x ; z 94 ; x 3 3 3 5 94 ; ; ; ; 3 x : 5 89 q ; ; x ; x ; ; x : ; ; ; ; ; ; 87 47% : () : / : 83
More information4. Mathematical models used in engineering structural analysis
4. Mathematical models used in engineering structural analysis In this chapter we pursue a formidable task to present the most important mathematical models in structural mechanics. In order to best situate
More informationMechanics of Earthquakes and Faulting
Mechanics of Earthquakes and Faulting www.geosc.psu.edu/courses/geosc508 Overview Milestones in continuum mechanics Concepts of modulus and stiffness. Stress-strain relations Elasticity Surface and body
More informationAnalysis of Infinitely Long Euler Bernoulli Beam on Two Parameter Elastic Foundation: Case of Point Load
Analysis of Infinitely Long Euler Bernoulli Beam on Two Parameter Elastic Foundation: Case of Point Load Dr. Mama, Benjamin Okwudili Department of Civil Engineering, University of Nigeria, Nsukka. benjamin.mama@unn.edu.ng
More informationMECE 3321 MECHANICS OF SOLIDS CHAPTER 1
MECE 3321 MECHANICS O SOLIDS CHAPTER 1 Samantha Ramirez, MSE WHAT IS MECHANICS O MATERIALS? Rigid Bodies Statics Dynamics Mechanics Deformable Bodies Solids/Mech. Of Materials luids 1 WHAT IS MECHANICS
More informationContent. Department of Mathematics University of Oslo
Chapter: 1 MEK4560 The Finite Element Method in Solid Mechanics II (January 25, 2008) (E-post:torgeiru@math.uio.no) Page 1 of 14 Content 1 Introduction to MEK4560 3 1.1 Minimum Potential energy..............................
More information4 NON-LINEAR ANALYSIS
4 NON-INEAR ANAYSIS arge displacement elasticity theory, principle of virtual work arge displacement FEA with solid, thin slab, and bar models Virtual work density of internal forces revisited 4-1 SOURCES
More informationBone Tissue Mechanics
Bone Tissue Mechanics João Folgado Paulo R. Fernandes Instituto Superior Técnico, 2016 PART 1 and 2 Introduction The objective of this course is to study basic concepts on hard tissue mechanics. Hard tissue
More informationEigenvalue analysis of the Timoshenko Beam theory with a damped boundary condition
Eigenvalue analysis of the Timoshenko Beam theory with a damped boundary condition Seb Harrevelt August 22, 212 1 Contents 1 Introduction 3 2 Notation 4 3 Equations of motion 5 3.1 Euler-Bernoulli beam
More information2 marks Questions and Answers
1. Define the term strain energy. A: Strain Energy of the elastic body is defined as the internal work done by the external load in deforming or straining the body. 2. Define the terms: Resilience and
More informationNonconservative Loading: Overview
35 Nonconservative Loading: Overview 35 Chapter 35: NONCONSERVATIVE LOADING: OVERVIEW TABLE OF CONTENTS Page 35. Introduction..................... 35 3 35.2 Sources...................... 35 3 35.3 Three
More informationHIGHER-ORDER THEORIES
HIGHER-ORDER THEORIES THIRD-ORDER SHEAR DEFORMATION PLATE THEORY LAYERWISE LAMINATE THEORY J.N. Reddy 1 Third-Order Shear Deformation Plate Theory Assumed Displacement Field µ u(x y z t) u 0 (x y t) +
More informationStrain Transformation equations
Strain Transformation equations R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Joint Initiative of IITs and IISc Funded by MHRD Page 1 of 8 Table of Contents 1. Stress transformation
More informationCONSTITUTIVE RELATIONS FOR LINEAR ELASTIC SOLIDS
Chapter 9 CONSTITUTIV RLATIONS FOR LINAR LASTIC SOLIDS Figure 9.1: Hooke memorial window, St. Helen s, Bishopsgate, City of London 211 212 CHAPTR 9. CONSTITUTIV RLATIONS FOR LINAR LASTIC SOLIDS 9.1 Mechanical
More informationINTRODUCTION TO STRAIN
SIMPLE STRAIN INTRODUCTION TO STRAIN In general terms, Strain is a geometric quantity that measures the deformation of a body. There are two types of strain: normal strain: characterizes dimensional changes,
More information1 Static Plastic Behaviour of Beams
1 Static Plastic Behaviour of Beams 1.1 Introduction Many ductile materials which are used in engineering practice have a considerable reserve capacity beyond the initial yield condition. The uniaxial
More informationVariational principles in mechanics
CHAPTER Variational principles in mechanics.1 Linear Elasticity n D Figure.1: A domain and its boundary = D [. Consider a domain Ω R 3 with its boundary = D [ of normal n (see Figure.1). The problem of
More informationMechanics of Earthquakes and Faulting
Mechanics of Earthquakes and Faulting www.geosc.psu.edu/courses/geosc508 Surface and body forces Tensors, Mohr circles. Theoretical strength of materials Defects Stress concentrations Griffith failure
More informationBy drawing Mohr s circle, the stress transformation in 2-D can be done graphically. + σ x σ y. cos 2θ + τ xy sin 2θ, (1) sin 2θ + τ xy cos 2θ.
Mohr s Circle By drawing Mohr s circle, the stress transformation in -D can be done graphically. σ = σ x + σ y τ = σ x σ y + σ x σ y cos θ + τ xy sin θ, 1 sin θ + τ xy cos θ. Note that the angle of rotation,
More informationIntroduction, Basic Mechanics 2
Computational Biomechanics 18 Lecture : Introduction, Basic Mechanics Ulli Simon, Lucas Engelhardt, Martin Pietsch Scientific Computing Centre Ulm, UZWR Ulm University Contents Mechanical Basics Moment
More informationNomenclature. Length of the panel between the supports. Width of the panel between the supports/ width of the beam
omenclature a b c f h Length of the panel between the supports Width of the panel between the supports/ width of the beam Sandwich beam/ panel core thickness Thickness of the panel face sheet Sandwich
More informationRitz Method. Introductory Course on Multiphysics Modelling
Ritz Method Introductory Course on Multiphysics Modelling TOMASZ G. ZIELIŃSKI bluebox.ippt.pan.pl/ tzielins/ Institute of Fundamental Technological Research of the Polish Academy of Sciences Warsaw Poland
More informationA short review of continuum mechanics
A short review of continuum mechanics Professor Anette M. Karlsson, Department of Mechanical ngineering, UD September, 006 This is a short and arbitrary review of continuum mechanics. Most of this material
More information1.050 Content overview Engineering Mechanics I Content overview. Selection of boundary conditions: Euler buckling.
.050 Content overview.050 Engineering Mechanics I Lecture 34 How things fail and how to avoid it Additional notes energy approach I. Dimensional analysis. On monsters, mice and mushrooms Lectures -3. Similarity
More informationSymmetric Bending of Beams
Symmetric Bending of Beams beam is any long structural member on which loads act perpendicular to the longitudinal axis. Learning objectives Understand the theory, its limitations and its applications
More informationStructural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian
Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian ahmadian@iust.ac.ir Dynamic Response of MDOF Systems: Mode-Superposition Method Mode-Superposition Method:
More informationProblem " Â F y = 0. ) R A + 2R B + R C = 200 kn ) 2R A + 2R B = 200 kn [using symmetry R A = R C ] ) R A + R B = 100 kn
Problem 0. Three cables are attached as shown. Determine the reactions in the supports. Assume R B as redundant. Also, L AD L CD cos 60 m m. uation of uilibrium: + " Â F y 0 ) R A cos 60 + R B + R C cos
More informationSmart Materials, Adaptive Structures, and Intelligent Mechanical Systems
Smart Materials, Adaptive Structures, and Intelligent Mechanical Systems Bishakh Bhattacharya & Nachiketa Tiwari Indian Institute of Technology Kanpur Lecture 32 Energy Methods References for this Lecture
More information' Liberty and Umou Ono and Inseparablo "
3 5? #< q 8 2 / / ) 9 ) 2 ) > < _ / ] > ) 2 ) ) 5 > x > [ < > < ) > _ ] ]? <
More informationNONLINEAR WAVE EQUATIONS ARISING IN MODELING OF SOME STRAIN-HARDENING STRUCTURES
NONLINEAR WAE EQUATIONS ARISING IN MODELING OF SOME STRAIN-HARDENING STRUCTURES DONGMING WEI Department of Mathematics, University of New Orleans, 2 Lakeshore Dr., New Orleans, LA 7148,USA E-mail: dwei@uno.edu
More informationEE C245 ME C218 Introduction to MEMS Design
EE C245 ME C218 Introduction to MEMS Design Fall 2007 Prof. Clark T.-C. Nguyen Dept. of Electrical Engineering & Computer Sciences University of California at Berkeley Berkeley, CA 94720 Lecture 16: Energy
More informationStress/Strain. Outline. Lecture 1. Stress. Strain. Plane Stress and Plane Strain. Materials. ME EN 372 Andrew Ning
Stress/Strain Lecture 1 ME EN 372 Andrew Ning aning@byu.edu Outline Stress Strain Plane Stress and Plane Strain Materials otes and News [I had leftover time and so was also able to go through Section 3.1
More informationNONLINEAR CONTINUUM FORMULATIONS CONTENTS
NONLINEAR CONTINUUM FORMULATIONS CONTENTS Introduction to nonlinear continuum mechanics Descriptions of motion Measures of stresses and strains Updated and Total Lagrangian formulations Continuum shell
More informationCrystal Relaxation, Elasticity, and Lattice Dynamics
http://exciting-code.org Crystal Relaxation, Elasticity, and Lattice Dynamics Pasquale Pavone Humboldt-Universität zu Berlin http://exciting-code.org PART I: Structure Optimization Pasquale Pavone Humboldt-Universität
More informationEML4507 Finite Element Analysis and Design EXAM 1
2-17-15 Name (underline last name): EML4507 Finite Element Analysis and Design EXAM 1 In this exam you may not use any materials except a pencil or a pen, an 8.5x11 formula sheet, and a calculator. Whenever
More informationInstitute of Structural Engineering Page 1. Method of Finite Elements I. Chapter 2. The Direct Stiffness Method. Method of Finite Elements I
Institute of Structural Engineering Page 1 Chapter 2 The Direct Stiffness Method Institute of Structural Engineering Page 2 Direct Stiffness Method (DSM) Computational method for structural analysis Matrix
More informationExercise: concepts from chapter 5
Reading: Fundamentals of Structural Geology, Ch 5 1) Study the oöids depicted in Figure 1a and 1b. Figure 1a Figure 1b Figure 1. Nearly undeformed (1a) and significantly deformed (1b) oöids with spherulitic
More informationBasic Equations of Elasticity
A Basic Equations of Elasticity A.1 STRESS The state of stress at any point in a loaded bo is defined completely in terms of the nine components of stress: σ xx,σ yy,σ zz,σ xy,σ yx,σ yz,σ zy,σ zx,andσ
More informationElastic-Plastic Fracture Mechanics. Professor S. Suresh
Elastic-Plastic Fracture Mechanics Professor S. Suresh Elastic Plastic Fracture Previously, we have analyzed problems in which the plastic zone was small compared to the specimen dimensions (small scale
More informationInstitute of Structural Engineering Page 1. Method of Finite Elements I. Chapter 2. The Direct Stiffness Method. Method of Finite Elements I
Institute of Structural Engineering Page 1 Chapter 2 The Direct Stiffness Method Institute of Structural Engineering Page 2 Direct Stiffness Method (DSM) Computational method for structural analysis Matrix
More informationTopic 5: Finite Element Method
Topic 5: Finite Element Method 1 Finite Element Method (1) Main problem of classical variational methods (Ritz method etc.) difficult (op impossible) definition of approximation function ϕ for non-trivial
More informationRetrospectives on My Studies of Solid Mechanics (II)
Retrospectives on My Studies of Solid Mechanics (II) - a new energy method based on the stationary principle of total energy By Tadahiko Kawai + and Etsu Kazama ++ ABSTRACT A new energy method is proposed
More informationVirtual Work and Variational Principles
Virtual Work and Principles Mathematically, the structural analysis problem is a boundary value problem (BVP). Forces, displacements, stresses, and strains are connected and computed within the framework
More informationPresented By: EAS 6939 Aerospace Structural Composites
A Beam Theory for Laminated Composites and Application to Torsion Problems Dr. BhavaniV. Sankar Presented By: Sameer Luthra EAS 6939 Aerospace Structural Composites 1 Introduction Composite beams have
More informationModule 3 : Equilibrium of rods and plates Lecture 15 : Torsion of rods. The Lecture Contains: Torsion of Rods. Torsional Energy
The Lecture Contains: Torsion of Rods Torsional Energy This lecture is adopted from the following book 1. Theory of Elasticity, 3 rd edition by Landau and Lifshitz. Course of Theoretical Physics, vol-7
More informationPLAXIS. Scientific Manual
PLAXIS Scientific Manual 2016 Build 8122 TABLE OF CONTENTS TABLE OF CONTENTS 1 Introduction 5 2 Deformation theory 7 2.1 Basic equations of continuum deformation 7 2.2 Finite element discretisation 8 2.3
More informationHomework No. 1 MAE/CE 459/559 John A. Gilbert, Ph.D. Fall 2004
Homework No. 1 MAE/CE 459/559 John A. Gilbert, Ph.D. 1. A beam is loaded as shown. The dimensions of the cross section appear in the insert. the figure. Draw a complete free body diagram showing an equivalent
More informationApplications of the Plate Membrane Theory
Chapter 2 Applications of the Plate Membrane Theory In this chapter we will give solutions for plates, which are loaded only on their edges. This implies that no distributed forces p x and p y occur, and
More informationGeneral Variation of a Functional
4 General Variation of a Functional 4 1 Chapter 4: GENERAL VARIATION OF A FUNCTIONAL TABLE OF CONTENTS Page 4.1 General Variation of a Functional............. 4 3 4.2 Extremals with Corners................
More informationLecture 15: Revisiting bars and beams.
3.10 Potential Energy Approach to Derive Bar Element Equations. We place assumptions on the stresses developed inside the bar. The spatial stress and strain matrices become very sparse. We add (ad-hoc)
More informationOWELL WEEKLY JOURNAL
Y \»< - } Y Y Y & #»»» q ] q»»»>) & - - - } ) x ( - { Y» & ( x - (» & )< - Y X - & Q Q» 3 - x Q Y 6 \Y > Y Y X 3 3-9 33 x - - / - -»- --
More informationStructural Displacements
Structural Displacements Beam Displacement 1 Structural Displacements P Truss Displacements 2 The deflections of civil engineer- ing structures under the action of usual design loads are known to be small
More informationChapter 9: Differential Analysis of Fluid Flow
of Fluid Flow Objectives 1. Understand how the differential equations of mass and momentum conservation are derived. 2. Calculate the stream function and pressure field, and plot streamlines for a known
More informationINCREASING RUPTURE PREDICTABILITY FOR ALUMINUM
1 INCREASING RUPTURE PREDICTABILITY FOR ALUMINUM Influence of anisotropy Daniel Riemensperger, Adam Opel AG Paul Du Bois, PDB 2 www.opel.com CONTENT Introduction/motivation Isotropic & anisotropic material
More informationCracks Jacques Besson
Jacques Besson Centre des Matériaux UMR 7633 Mines ParisTech PSL Research University Institut Mines Télécom Aγνωστ oς Θεoς Outline 1 Some definitions 2 in a linear elastic material 3 in a plastic material
More informationVideo Lecture on Engineering Fracture Mechanics, Prof. K. Ramesh, IIT Madras 1. Simply connected and multiply connected domains
Video Lecture on Engineering Fracture Mechanics, Prof. K. Ramesh, IIT Madras 1 Module No. # 03, Lecture No. # 13: Displacement and Stress Formulations (Refer Slide Time: 00:23) Simply connected and multiply
More informationLecture 1 NONLINEAR ELASTICITY
Lecture 1 NONLINEAR ELASTICITY Soft-Matter Engineering: Mechanics, Design, & Modeling Mechanics Rigid/Hard Systems bending or torsion (but not stretching) small strains (~0.1% metals; ~1% plastics) linearized
More informationUse Hooke s Law (as it applies in the uniaxial direction),
0.6 STRSS-STRAIN RLATIONSHIP Use the principle of superposition Use Poisson s ratio, v lateral longitudinal Use Hooke s Law (as it applies in the uniaxial direction), x x v y z, y y vx z, z z vx y Copyright
More informationMechanical Design in Optical Engineering
OPTI Buckling Buckling and Stability: As we learned in the previous lectures, structures may fail in a variety of ways, depending on the materials, load and support conditions. We had two primary concerns:
More information