KINEMATICS OF PARTICLES RESPECT TO TRANSLATING AXES
|
|
- Michael Goodman
- 5 years ago
- Views:
Transcription
1 KINEMATICS OF PARTICLES RELATIVE MOTION WITH RESPECT TO TRANSLATING AXES
2 In the previous articles, we have described particle motion using coordinates with respect to fixed reference axes. The displacements, velocities and accelerations so determined are termed absolute.
3 It is not always possible or convenient to use a fixed set of axes to describe or to measure motion. In addition, there are many engineering problems for which the analysis of motion is simplified by using measurements made with respect to a moving reference system. These measurements, when combined with the absolute motion of the moving coordinate system, enable us to determine the absolute motion in question. This approach is called the relative motion analysis.
4 In this article, we will confine our attention to moving reference systems which translate but do not rotate. Motion measured in rotating systems will be discussed in rigid body kinematics, where this approach finds special but important application. We will also confine our attention here to relative motion analysis for plane motion.
5 Now let s consider two particles A and which may have separate curvilinear motions in a given plane or in parallel planes; the positions of the particles at any time with respect to fixed OXY reference system are defined by and. r v A r v Translating axis Fixed axis Let s attach the origin of a set of translating (nonrotating) axes to particle and observe the motion of A from our moving position on.
6 The position vector of A as measured r A / v yj relative to the frame x-y is, where the subscript notation A/ means A relative to or A with respect to. v v = xi + Translating axes Fixed axes
7 The position of A is, therefore, determined by the vector v v v r = r + r A A/ Fixed axes Translating axes
8 v We now differentiate this vector equation v v v r = r + r once with respect to time to A A / obtain velocities and twice to obtain accelerations. A = v v + &v &v v & A / A A / ( r = r + r ) Here, the velocity which we observe A to have from our position at attached v vto the moving axes x-y is r&v v = xi & + yj &. A/ = A/ This term is the velocity of A with respect to.
9 A Acceleration is obtained as a v = a v + a v & v & v & v &v &v + A/ ( r& = r& + r& ), ( v = v v ) A A/ Here, the acceleration which we observe A to have from our nonrotating position on is & v v v r v = v&v = a = && xi. + && yj & A / = A/ A/ This term is the acceleration of A with respect to. We note that the unit vectors and have zero derivatives because their directions as well as their magnitudes remain unchanged. i v A j v &v A/
10 The velocity and acceleration equations state that the absolute velocity (or acceleration) equals the absolute velocity (or acceleration) of plus, vectorially, the velocity (or acceleration) of A relative to. The relative term is the velocity (or acceleration) measurement which an observer attached to the moving coordinate system x-y would make. We can express the relative motion terms in whatever coordinate system is convenient rectangular, normal and tangential or polar, and use their relevant expressions.
11 1. The car A has a forward speed of 18 km/h and is accelerating at 3 m/s 2. Determine the velocity and acceleration of the car relative to observer, who rides in a nonrotating chair on the Ferris wheel. The angular rate Ω = 3 rev/min of the Ferris wheel is constant.
12 2. A batter hits the baseball A with an initial velocity of v 0 =30 m/s directly toward fielder at an angle of 30 to the horizontal; the initial position of the ball is 0.9 m above ground level. Fielder requires ¼ s to judge where the ball should be caught and begins moving to that position with constant speed. ecause of great experience, fielder chooses his running speed so that he arrives at the catch position simultaneously with the ball. The catch position is the field location at which the ball altitude is 2.1 m. Determine the velocity of the ball relative to the fielder at the instant the catch is made.
13 3. Airplane A is flying horizontally with a constant speed of 200 km/h and is towing the glider, which is gaining altitude. If the tow cable has a length r = 60 m and θ is increasing at the constant rate of 5 degrees per second, determine the magnitudes of the velocity v and acceleration a v of the glider for the instant when θ = 15.
14 4. Car A is traveling along a circular curve of 60 m radius at a constant speed of 54 km/h. When A passes the position shown, car is 30 m from the intersection, traveling with a 30 m 30 o θ 60 m r A speed of 72 km/h and accelerating at the rate of 1.5 m/s 2. Determine the velocity and acceleration which A appears to have when observed by an occupant of at this instant. Also r& & θ & r& determine r, θ,,, and & θ for this instant.
KINEMATICS OF PARTICLES PROBLEMS ON RELATIVE MOTION WITH RESPECT TO TRANSLATING AXES
KINEMATICS OF PARTICLES PROBLEMS ON RELATIVE MOTION WITH RESPECT TO TRANSLATING AXES 1. The car A has a forward speed of 18 km/h and is accelerating at 3 m/s2. Determine the elocity and acceleration of
More informationKinetics of Particles
Kinetics of Particles A- Force, Mass, and Acceleration Newton s Second Law of Motion: Kinetics is a branch of dynamics that deals with the relationship between the change in motion of a body and the forces
More informationRIGID BODY MOTION (Section 16.1)
RIGID BODY MOTION (Section 16.1) There are cases where an object cannot be treated as a particle. In these cases the size or shape of the body must be considered. Rotation of the body about its center
More information1 Problems 1-3 A disc rotates about an axis through its center according to the relation θ (t) = t 4 /4 2t
Slide 1 / 30 1 Problems 1-3 disc rotates about an axis through its center according to the relation θ (t) = t 4 /4 2t etermine the angular velocity of the disc at t= 2 s 2 rad/s 4 rad/s 6 rad/s 8 rad/s
More informationSlide 1 / 30. Slide 2 / 30. Slide 3 / m/s -1 m/s
1 Problems 1-3 disc rotates about an axis through its center according to the relation θ (t) = t 4 /4 2t Slide 1 / 30 etermine the angular velocity of the disc at t= 2 s 2 rad/s 4 rad/s 6 rad/s 8 rad/s
More informationDynamics 12e. Copyright 2010 Pearson Education South Asia Pte Ltd. Chapter 20 3D Kinematics of a Rigid Body
Engineering Mechanics: Dynamics 12e Chapter 20 3D Kinematics of a Rigid Body Chapter Objectives Kinematics of a body subjected to rotation about a fixed axis and general plane motion. Relative-motion analysis
More informationChapter 4 Kinematics II: Motion in Two and Three Dimensions
Chapter 4 Kinematics II: Motion in Two and Three Dimensions Demonstrations: 1) Ball falls down and another falls out 2) Parabolic and straight line motion from two different frames. The truck with a dropping
More informationAddis Ababa University Addis Ababa Institute of Technology School Of Mechanical and Industrial Engineering Extension Division` Assignment 1
Assignment 1 1. Vehicle B is stopped at a traffic light, as shown in the figure. At the instant that the light turns green, vehicle B starts to accelerate at 0.9144m/s 2. At this time vehicle A is 91.44m
More informationDynamics Plane kinematics of rigid bodies Section 4: TJW Rotation: Example 1
Section 4: TJW Rotation: Example 1 The pinion A of the hoist motor drives gear B, which is attached to the hoisting drum. The load L is lifted from its rest position and acquires an upward velocity of
More informationPLANAR KINETICS OF A RIGID BODY FORCE AND ACCELERATION
PLANAR KINETICS OF A RIGID BODY FORCE AND ACCELERATION I. Moment of Inertia: Since a body has a definite size and shape, an applied nonconcurrent force system may cause the body to both translate and rotate.
More informationMotion Chapter 3, Section 1: Distance, Displacement, Speed, Velocity
3 Motion Chapter 3, Section 1: Distance, Displacement, Speed, Velocity Distance An important part of describing the motion of an object is to describe how far it has moved, which is distance. The SI unit
More informationPLANAR RIGID BODY MOTION: TRANSLATION & ROTATION
PLANAR RIGID BODY MOTION: TRANSLATION & ROTATION Today s Objectives : Students will be able to: 1. Analyze the kinematics of a rigid body undergoing planar translation or rotation about a fixed axis. In-Class
More informationLesson 8 Kinematics V - Circular Motion
I. Circular Motion and Polar Coordinates Lesson 8 Kinematics V - Circular Motion A. Consider the motion of ball on a circle from point A to point B as shown below. We could describe the path of the ball
More information2/27/2018. Relative Motion. Reference Frames. Reference Frames
Relative Motion The figure below shows Amy and Bill watching Carlos on his bicycle. According to Amy, Carlos s velocity is (v x ) CA 5 m/s. The CA subscript means C relative to A. According to Bill, Carlos
More informationRELATIVE MOTION ANALYSIS: VELOCITY (Section 16.5)
RELATIVE MOTION ANALYSIS: VELOCITY (Section 16.5) Today s Objectives: Students will be able to: a) Describe the velocity of a rigid body in terms of translation and rotation components. b) Perform a relative-motion
More information2D and 3D Motion. with constant (uniform) acceleration
2D and 3D Motion with constant (uniform) acceleration 1 Dimension 2 or 3 Dimensions x x v : position : position : displacement r : displacement : velocity v : velocity a : acceleration a r : acceleration
More information3.1 Using Vectors 3.3 Coordinate Systems and Vector Components.notebook September 19, 2017
Using Vectors A vector is a quantity with both a size (magnitude) and a direction. Figure 3.1 shows how to represent a particle s velocity as a vector. Section 3.1 Using Vectors The particle s speed at
More informationLesson 2. Physics 168. Luis Anchordoqui
Lesson 2 Physics 168 Luis Anchordoqui Deriving Constant-Acceleration Kinematic Equations To obtain an equation for position as a function of time! look at special case of motion with constant velocity!
More information6-1. Conservation law of mechanical energy
6-1. Conservation law of mechanical energy 1. Purpose Investigate the mechanical energy conservation law and energy loss, by studying the kinetic and rotational energy of a marble wheel that is moving
More informationRotation. PHYS 101 Previous Exam Problems CHAPTER
PHYS 101 Previous Exam Problems CHAPTER 10 Rotation Rotational kinematics Rotational inertia (moment of inertia) Kinetic energy Torque Newton s 2 nd law Work, power & energy conservation 1. Assume that
More information2-D Motion of Rigid Bodies - Kinematics
1 2.003J/1.053J Dynamics and Control I, Spring 2007 Professor Thomas Peacock 2/28/2007 Lecture 7 2-D Motion of Rigid Bodies - Kinematics Kinematics of Rigid Bodies Williams 3-3 (No method of instant centers)
More informationProblem: Projectile (CM-1998) Justify your answer: Problem: Projectile (CM-1998) 5 10 m/s 3. Show your work: 3 m/s 2
Physics C -D Kinematics Name: AP Review Packet Vectors have both magnitude and direction displacement, velocity, acceleration Scalars have magnitude only distance, speed, time, mass Unit vectors Specify
More informationRolling, Torque & Angular Momentum
PHYS 101 Previous Exam Problems CHAPTER 11 Rolling, Torque & Angular Momentum Rolling motion Torque Angular momentum Conservation of angular momentum 1. A uniform hoop (ring) is rolling smoothly from the
More informationLecture 16 ME 231: Dynamics
Kinematics of Particles (Ch. 2) Review Lecture 16 Question of the Day What is the most important concept in Chapter 2? Time Derivative of a Vector 2 Outline for Today Question of the day Where are we in
More informationKinematics of Particles. Chapter 2
Kinematics of Particles Chapter 2 Introduction Kinematics: is the branch of dynamics which describes the motion of bodies without reference to the forces that either causes the motion or are generated
More informationChapter 4. Motion in two and three dimensions
Chapter 4 Motion in two and three dimensions 4.2 Position and Displacement 4.3 Average Velocity and Instantaneous Velocity 4.4 Average and Instantaneous Accelerations Following the same definition as in
More informationMOTION IN A PLANE. Chapter Four MCQ I. (a) 45 (b) 90 (c) 45 (d) 180
Chapter Four MOTION IN A PLANE MCQ I 4.1 The angle between A = ˆi + ˆj and B = ˆi ˆj is (a) 45 (b) 90 (c) 45 (d) 180 4.2 Which one of the following statements is true? (a) A scalar quantity is the one
More informationPLANAR KINETIC EQUATIONS OF MOTION (Section 17.2)
PLANAR KINETIC EQUATIONS OF MOTION (Section 17.2) We will limit our study of planar kinetics to rigid bodies that are symmetric with respect to a fixed reference plane. As discussed in Chapter 16, when
More informationPhysics 23 Exam 3 April 2, 2009
1. A string is tied to a doorknob 0.79 m from the hinge as shown in the figure. At the instant shown, the force applied to the string is 5.0 N. What is the torque on the door? A) 3.3 N m B) 2.2 N m C)
More informationDEVIL CHAPTER 6 TEST REVIEW
IB PHYSICS Name: Period: Date: # Marks: 51 DEVIL PHYSICS BADDEST CLASS ON CAMPUS CHAPTER 6 TEST REVIEW 1. A cyclist rides around a circular track at a uniform speed. Which of the following correctly gives
More informationKinematics. Vector solutions. Vectors
Kinematics Study of motion Accelerated vs unaccelerated motion Translational vs Rotational motion Vector solutions required for problems of 2- directional motion Vector solutions Possible solution sets
More informationMASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Physics Physics IC_W05D1 ConcepTests
Reading Question MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Physics Physics 8.01 IC_W05D1 ConcepTests Two objects are pushed on a frictionless surface from a starting line to a finish line with
More information= o + t = ot + ½ t 2 = o + 2
Chapters 8-9 Rotational Kinematics and Dynamics Rotational motion Rotational motion refers to the motion of an object or system that spins about an axis. The axis of rotation is the line about which the
More informationPosition: Angular position =! = s r. Displacement: Angular displacement =!" = " 2
Chapter 11 Rotation Perfectly Rigid Objects fixed shape throughout motion Rotation of rigid bodies about a fixed axis of rotation. In pure rotational motion: every point on the body moves in a circle who
More informationExam 1 September 11, 2013
Exam 1 Instructions: You have 60 minutes to complete this exam. This is a closed-book, closed-notes exam. You are allowed to use an approved calculator during the exam. Usage of mobile phones and other
More informationExam #2, Chapters 5-7 PHYS 101-4M MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
Exam #2, Chapters 5-7 Name PHYS 101-4M MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) The quantity 1/2 mv2 is A) the potential energy of the object.
More informationLecture 19. ROLLING WITHOUT SLIPPING. Figure 4.8 Gear rolling in geared horizontal guides. Figure 4.9 Wheel rolling on a horizontal surface.
Lecture 19. ROLLING WITHOUT SLIPPING Figure 4.8 Gear rolling in geared horizontal guides. Figure 4.9 Wheel rolling on a horizontal surface. The derivation and understanding of velocity and acceleration
More informationContents. Objectives Circular Motion Velocity and Acceleration Examples Accelerating Frames Polar Coordinates Recap. Contents
Physics 121 for Majors Today s Class You will see how motion in a circle is mathematically similar to motion in a straight line. You will learn that there is a centripetal acceleration (and force) and
More informationBig Idea 4: Interactions between systems can result in changes in those systems. Essential Knowledge 4.D.1: Torque, angular velocity, angular
Unit 7: Rotational Motion (angular kinematics, dynamics, momentum & energy) Name: Big Idea 3: The interactions of an object with other objects can be described by forces. Essential Knowledge 3.F.1: Only
More informationME 012 Engineering Dynamics
ME 012 Engineering Dynamics Lecture 7 Absolute Dependent Motion Analysis of Two Particles (Chapter 12, Section 10) Tuesday, Feb. 05, 2013 Today s Objectives: Understand translating frames of reference.
More informationWebreview Torque and Rotation Practice Test
Please do not write on test. ID A Webreview - 8.2 Torque and Rotation Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A 0.30-m-radius automobile
More informationChapter 3. Vectors. θ that the vector forms with i ˆ is 15. I. Vectors and Scalars
Chapter 3. Vectors I. Vectors and Scalars 1. What type of quantity does the odometer of a car measure? a) vector; b) scalar; c) neither scalar nor vector; d) both scalar and vector. 2. What type of quantity
More informationRecap. The bigger the exhaust speed, ve, the higher the gain in velocity of the rocket.
Recap Classical rocket propulsion works because of momentum conservation. Exhaust gas ejected from a rocket pushes the rocket forwards, i.e. accelerates it. The bigger the exhaust speed, ve, the higher
More informationE 490 FE Exam Prep. Engineering Mechanics
E 490 FE Exam Prep Engineering Mechanics 2008 E 490 Course Topics Statics Newton s Laws of Motion Resultant Force Systems Moment of Forces and Couples Equilibrium Pulley Systems Trusses Centroid of an
More informationPHYS 1303 Final Exam Example Questions
PHYS 1303 Final Exam Example Questions 1.Which quantity can be converted from the English system to the metric system by the conversion factor 5280 mi f 12 f in 2.54 cm 1 in 1 m 100 cm 1 3600 h? s a. feet
More informationLecture 6. Circular Motion. Pre-reading: KJF 6.1 and 6.2. Please take a clicker CIRCULAR MOTION KJF
Lecture 6 Circular Motion Pre-reading: KJF 6.1 and 6.2 Please take a clicker CIRCULAR MOTION KJF 6.1 6.4 Angular position If an object moves in a circle of radius r, then after travelling a distance s
More informationPrinciples and Problems. Chapter 6: Motion in Two Dimensions
PHYSICS Principles and Problems Chapter 6: Motion in Two Dimensions CHAPTER 6 Motion in Two Dimensions BIG IDEA You can use vectors and Newton s laws to describe projectile motion and circular motion.
More informationPage 1. Name:
Name: 3834-1 - Page 1 1) If a woman runs 100 meters north and then 70 meters south, her total displacement is A) 170 m south B) 170 m north C) 30 m south D) 30 m north 2) The graph below represents the
More informationEngineering Mechanics Prof. U. S. Dixit Department of Mechanical Engineering Indian Institute of Technology, Guwahati Kinematics
Engineering Mechanics Prof. U. S. Dixit Department of Mechanical Engineering Indian Institute of Technology, Guwahati Kinematics Module 10 - Lecture 24 Kinematics of a particle moving on a curve Today,
More informationSECTION A. 8 kn/m. C 3 m 3m
SECTION Question 1 150 m 40 kn 5 kn 8 kn/m C 3 m 3m D 50 ll dimensions in mm 15 15 Figure Q1(a) Figure Q1(b) The horizontal beam CD shown in Figure Q1(a) has a uniform cross-section as shown in Figure
More informationPLANAR RIGID BODY MOTION: TRANSLATION &
PLANAR RIGID BODY MOTION: TRANSLATION & Today s Objectives : ROTATION Students will be able to: 1. Analyze the kinematics of a rigid body undergoing planar translation or rotation about a fixed axis. In-Class
More informationName: Date: Period: AP Physics C Rotational Motion HO19
1.) A wheel turns with constant acceleration 0.450 rad/s 2. (9-9) Rotational Motion H19 How much time does it take to reach an angular velocity of 8.00 rad/s, starting from rest? Through how many revolutions
More informationChapter 9 [ Edit ] Ladybugs on a Rotating Disk. v = ωr, where r is the distance between the object and the axis of rotation. Chapter 9. Part A.
Chapter 9 [ Edit ] Chapter 9 Overview Summary View Diagnostics View Print View with Answers Due: 11:59pm on Sunday, October 30, 2016 To understand how points are awarded, read the Grading Policy for this
More informationPhys 106 Practice Problems Common Quiz 1 Spring 2003
Phys 106 Practice Problems Common Quiz 1 Spring 2003 1. For a wheel spinning with constant angular acceleration on an axis through its center, the ratio of the speed of a point on the rim to the speed
More informationWelcome back to Physics 211
Welcome back to Physics 211 Today s agenda: Circular Motion 04-2 1 Exam 1: Next Tuesday (9/23/14) In Stolkin (here!) at the usual lecture time Material covered: Textbook chapters 1 4.3 s up through 9/16
More informationExam 3--PHYS 101--F15
Name: Exam 3--PHYS 0--F5 Multiple Choice Identify the choice that best completes the statement or answers the question.. It takes 00 m to stop a car initially moving at 25.0 m/s. The distance required
More informationMHS. Applied Math. Sample Questions. Exam to go from grade 11 to grade 12
MHS Applied Math Exam to go from grade 11 to grade 1 Sample Questions 1. OP + PA + AR = 1. OPAR. AR 3. OR. Given two vectors u and v in the box below, how can we correctly find their sum, u + v, using
More informationConstants: Acceleration due to gravity = 9.81 m/s 2
Constants: Acceleration due to gravity = 9.81 m/s 2 PROBLEMS: 1. In an experiment, it is found that the time t required for an object to travel a distance x is given by the equation = where is the acceleration
More informationConstants: Acceleration due to gravity = 9.81 m/s 2
Constants: Acceleration due to gravity = 9.81 m/s 2 PROBLEMS: 1. In an experiment, it is found that the time t required for an object to travel a distance x is given by the equation = where is the acceleration
More informationPHYSICS - CLUTCH CH 10: ROTATIONAL KINEMATICS.
!! www.clutchprep.com ROTATIONAL POSITION & DISPLACEMENT Rotational Motion is motion around a point, that is, in a path. - The rotational equivalent of linear POSITION ( ) is Rotational/Angular position
More informationQ3.1. A. 100 m B. 200 m C. 600 m D m E. zero. 500 m. 400 m. 300 m Pearson Education, Inc.
Q3.1 P 400 m Q A bicyclist starts at point P and travels around a triangular path that takes her through points Q and R before returning to point P. What is the magnitude of her net displacement for the
More informationPES Physics 1 Practice Questions Exam 2. Name: Score: /...
Practice Questions Exam /page PES 0 003 - Physics Practice Questions Exam Name: Score: /... Instructions Time allowed for this is exam is hour 5 minutes... multiple choice (... points)... written problems
More informationCurvilinear Motion: Normal and Tangential Components
Curvilinear Motion: Normal and Tangential Components Coordinate System Provided the path of the particle is known, we can establish a set of n and t coordinates having a fixed origin, which is coincident
More informationSCHEME OF BE 100 ENGINEERING MECHANICS DEC 2015
Part A Qn. No SCHEME OF BE 100 ENGINEERING MECHANICS DEC 201 Module No BE100 ENGINEERING MECHANICS Answer ALL Questions 1 1 Theorem of three forces states that three non-parallel forces can be in equilibrium
More informationRotational Motion and Angular Displacement
Physics 20 AP - Assignment #5 Angular Velocity and Acceleration There are many examples of rotational motion in everyday life (i.e. spinning propeller blades, CD players, tires on a moving car ). In this
More informationCHAPTER 10 ROTATION OF A RIGID OBJECT ABOUT A FIXED AXIS WEN-BIN JIAN ( 簡紋濱 ) DEPARTMENT OF ELECTROPHYSICS NATIONAL CHIAO TUNG UNIVERSITY
CHAPTER 10 ROTATION OF A RIGID OBJECT ABOUT A FIXED AXIS WEN-BIN JIAN ( 簡紋濱 ) DEPARTMENT OF ELECTROPHYSICS NATIONAL CHIAO TUNG UNIVERSITY OUTLINE 1. Angular Position, Velocity, and Acceleration 2. Rotational
More informationLecture D16-2D Rigid Body Kinematics
J. Peraire 16.07 Dynamics Fall 2004 Version 1.2 Lecture D16-2D Rigid Body Kinematics In this lecture, we will start from the general relative motion concepts introduced in lectures D11 and D12, and then
More informationRigid Object. Chapter 10. Angular Position. Angular Position. A rigid object is one that is nondeformable
Rigid Object Chapter 10 Rotation of a Rigid Object about a Fixed Axis A rigid object is one that is nondeformable The relative locations of all particles making up the object remain constant All real objects
More informationPHYS 1303 Final Exam Example Questions
PHYS 1303 Final Exam Example Questions (In summer 2014 we have not covered questions 30-35,40,41) 1.Which quantity can be converted from the English system to the metric system by the conversion factor
More informationEGBE261: Biomechanics 2 Homework from Chapter 2: Motion of a Point
EGBE261: Biomechanics 2 Homework from Chapter 2: Motion of a Point Use Straight-Line motion equations for the following problems: 2.8. The mechanism causes the displacement of point P to be s = 0.2 sin
More informationChapter 1: Kinematics of Particles
Chapter 1: Kinematics of Particles 1.1 INTRODUCTION Mechanics the state of rest of motion of bodies subjected to the action of forces Static equilibrium of a body that is either at rest or moes with constant
More informationTYPICAL NUMERIC QUESTIONS FOR PHYSICS I REGULAR QUESTIONS TAKEN FROM CUTNELL AND JOHNSON CIRCULAR MOTION CONTENT STANDARD IB
TYPICAL NUMERIC QUESTIONS FOR PHYSICS I REGULAR QUESTIONS TAKEN FROM CUTNELL AND JOHNSON CIRCULAR MOTION CONTENT STANDARD IB 1. A car traveling at 20 m/s rounds a curve so that its centripetal acceleration
More informationRotational Motion and the Law of Gravity 1
Rotational Motion and the Law of Gravity 1 Linear motion is described by position, velocity, and acceleration. Circular motion repeats itself in circles around the axis of rotation Ex. Planets in orbit,
More informationRotation Basics. I. Angular Position A. Background
Rotation Basics I. Angular Position A. Background Consider a student who is riding on a merry-go-round. We can represent the student s location by using either Cartesian coordinates or by using cylindrical
More informationMotion in Two or Three Dimensions
Chapter 3 Motion in Two or Three Dimensions PowerPoint Lectures for University Physics, Thirteenth Edition Hugh D. Young and Roger A. Freedman Lectures by Wayne Anderson Goals for Chapter 3 To use vectors
More informationREADING QUIZ. CEE 271: Applied Mechanics II, Dynamics Lecture 21: Ch.16, Sec.1 4 APPLICATIONS. PLANAR RIGID BODY MOTION: TRANSLATION and ROTATION
READING QUIZ CEE 271: Applied Mechanics II, Dynamics Lecture 21: Ch.16, Sec.1 4 Prof. Albert S. Kim Civil and Environmental Engineering, University of Hawaii at Manoa Date: 1 If a rigid body is in translation
More informationNAME. (2) Choose the graph below that represents the velocity vs. time for constant, nonzero acceleration in one dimension.
(1) The figure shows a lever (which is a uniform bar, length d and mass M), hinged at the bottom and supported steadily by a rope. The rope is attached a distance d/4 from the hinge. The two angles are
More informationFinal Exam April 30, 2013
Final Exam Instructions: You have 120 minutes to complete this exam. This is a closed-book, closed-notes exam. You are allowed to use a calculator during the exam. Usage of mobile phones and other electronic
More informationNo Brain Too Small PHYSICS
MECHANICS: CIRCULAR MOTION QUESTIONS CIRCULAR MOTION (2016;1) Alice is in a car on a ride at a theme park. The car travels along a circular track that is banked, as shown in the diagram. On the diagram,
More informationRotation. Rotational Variables
Rotation Rigid Bodies Rotation variables Constant angular acceleration Rotational KE Rotational Inertia Rotational Variables Rotation of a rigid body About a fixed rotation axis. Rigid Body an object that
More informationRotational Dynamics, Moment of Inertia and Angular Momentum
Rotational Dynamics, Moment of Inertia and Angular Momentum Now that we have examined rotational kinematics and torque we will look at applying the concepts of angular motion to Newton s first and second
More information4) Vector = and vector = What is vector = +? A) B) C) D) E)
1) Suppose that an object is moving with constant nonzero acceleration. Which of the following is an accurate statement concerning its motion? A) In equal times its speed changes by equal amounts. B) In
More information6. Find the net torque on the wheel in Figure about the axle through O if a = 10.0 cm and b = 25.0 cm.
1. During a certain period of time, the angular position of a swinging door is described by θ = 5.00 + 10.0t + 2.00t 2, where θ is in radians and t is in seconds. Determine the angular position, angular
More informationReview - Chapter 1. Ans: 2.12m
Review - Chapter 1 The distance d that a certain particle moves may be calculated from the expression d = at + bt 2 where a and b are constants; and t is the elapsed time. The dimensions of the quantities
More informationChapter 8. Rotational Kinematics
Chapter 8 Rotational Kinematics 8.3 The Equations of Rotational Kinematics 8.4 Angular Variables and Tangential Variables The relationship between the (tangential) arc length, s, at some radius, r, and
More informationME 274 Spring 2017 Examination No. 2 PROBLEM No. 2 (20 pts.) Given:
PROBLEM No. 2 (20 pts.) Given: Blocks A and B (having masses of 2m and m, respectively) are connected by an inextensible cable, with the cable being pulled over a small pulley of negligible mass. Block
More informationChapter Units and Measurement
2 Chapter Units and Measurement 1. Identify the pair whose dimensions are equal [2002] torque and work stress and energy force and stress force and work 2. [2003] [L -1 T] ] [L -2 T 2 ] [L 2 T -2 ] [LT
More informationUniform Circular Motion AP
Uniform Circular Motion AP Uniform circular motion is motion in a circle at the same speed Speed is constant, velocity direction changes the speed of an object moving in a circle is given by v circumference
More informationWiley Plus. Final Assignment (5) Is Due Today: Before 11 pm!
Wiley Plus Final Assignment (5) Is Due Today: Before 11 pm! Final Exam Review December 9, 009 3 What about vector subtraction? Suppose you are given the vector relation A B C RULE: The resultant vector
More informationFrames of reference. Objectives. Assessment. Physics terms. Equations. What is a frame of reference? 5/19/14
Frames of reference Objectives Identify and describe motion relative to different frames of reference. Calculate the one-dimensional velocity of an object in a moving frame of reference. A train is moving
More informationCircular Motion. ว Note and Worksheet 2. Recall that the defining equation for instantaneous acceleration is
Circular Motion Imagine you have attached a rubber stopper to the end of a string and are whirling the stopper around your head in a horizontal circle. If both the speed of the stopper and the radius of
More informationChapter 2 Kinematics in One Dimension
Chapter 2 Kinematics in One Dimension The Cheetah: A cat that is built for speed. Its strength and agility allow it to sustain a top speed of over 100 km/h. Such speeds can only be maintained for about
More informationThe graph shows how the resultant force on the car varies with displacement.
1 (a) A car is moving at constant velocity when the driver applies the brakes. The graph shows how the resultant force on the car varies with displacement. Resultant force 0 A B Displacement (i) State
More informationAP Physics I Summer Work
AP Physics I Summer Work 2018 (20 points) Please complete the following set of questions and word problems. Answers will be reviewed in depth during the first week of class followed by an assessment based
More informationChapter 6 Motion in Two Dimensions
Conceptual Physics/ PEP Name: Date: Chapter 6 Motion in Two Dimensions Section Review 6.1 1. What is the word for the horizontal distance a projectile travels? 2. What does it mean to say a projectile
More informationSolution Only gravity is doing work. Since gravity is a conservative force mechanical energy is conserved:
8) roller coaster starts with a speed of 8.0 m/s at a point 45 m above the bottom of a dip (see figure). Neglecting friction, what will be the speed of the roller coaster at the top of the next slope,
More informationKinematics Multiple-Choice Questions
Kinematics Multiple-Choice Questions 1. An object moves around a circular path of radius R. The object starts from point A, goes to point B and describes an arc of half of the circle. Which of the following
More informationChapter 4. Two-Dimensional Motion
Chapter 4. Two-Dimensional Motion 09/1/003 I. Intuitive (Understanding) Review Problems. 1. If a car (object, body, truck) moves with positive velocity and negative acceleration, it means that its a) speed
More informationPSI AP Physics 1 Kinematics. Free Response Problems
PSI AP Physics 1 Kinematics Free Response Problems 1. A car whose speed is 20 m/s passes a stationary motorcycle which immediately gives chase with a constant acceleration of 2.4 m/s 2. a. How far will
More informationPhysics I Exam 1 Fall 2015 (version A)
95.141 Physics I Exam 1 Fall 2015 (version A) Recitation Section Number Last/First Name (PRINT) / Last 3 Digits of Student ID Number: Fill out the above section of this page and print your last name on
More information