Generalized Single Degree of Freedom Systems
|
|
- Isabella Benson
- 5 years ago
- Views:
Transcription
1 Single Degree of Freedom Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano March, 8 Outline Until now our were described as composed by a single mass connected to a fixed reference by means of a spring and a damper. While the mass-spring is a useful representation, many different, more complex systems can be studied as SDOF systems, either exactly or under some simplifying assumption.. SDOF rigid body assemblages, where the flexibility is concentrated in a number of springs and dampers, can be studied, e.g., using the Principle of Virtual Displacements and the D Alembert Principle.. simple structural systems can be studied, in an approximate manner, assuming a fixed pattern of displacements, whose amplitude (the single degree of freedom) varies with time.
2 Further on Rigid Assemblages Today we restrict our consideration to plane, -D systems. In rigid body assemblages the limitation to a single shape of displacement is a consequence of the configuration of the system, i.e., the disposition of supports and internal hinges. When the equation of motion is written in terms of a single parameter and its time derivatives, the terms that figure as coefficients in the equation of motion can be regarded as the generalised properties of the assemblage: generalised mass, damping and stiffness on left hand, generalised loading on right hand. m ẍ + c ẋ + k x = p (t) Further on systems have an infinite variety of deformation patterns. By restricting the deformation to a single shape of varying amplitude, we introduce an infinity of internal contstraints that limit the infinite variety of deformation patterns, but under this assumption the system configuration is mathematically described by a single parameter, so that our model can be analysed in exactly the same way as a strict SDOF system, we can compute the generalised mass, damping, stiffness properties of the SDOF model of the continuous system. Final on Generalised SDOF From the previous comments, it should be apparent that everything we have seen regarding the behaviour and the integration of the equation of motion of proper SDOF systems applies to rigid body assemblages and to SDOF models of flexible systems, provided that we have the means for determining the generalised properties of the dynamical systems under investigation.
3 Assemblages of planar, or bidimensional, rigid bodies, constrained to move in a plane, the flexibility is concentrated in discrete elements, springs and dampers, rigid bodies are connected to a fixed reference and to each other by means of springs, dampers and smooth, bilateral constraints (read hinges, double pendulums and rollers), inertial forces are distributed forces, acting on each material point of each rigid body, their resultant can be described by a force applied to the centre of mass of the body, proportional to acceleration vector (of the centre of mass itself) and total mass M = dm a couple, proportional to angular acceleration and the moment of inertia J of the rigid body, J = (x + y )dm. Rigid Bar Unit mass Centre of Mass Length L, Total Mass Moment of Inertia L G m = constant, x G = L/, m = ml, J = m L = ml x Rigid Rectangle Unit mass Sides y γ = constant, a, b Centre of Mass x G = a/, y G = b/ Total Mass m = γab, Moment of Inertia J = m a + b a G = γ a b + ab b
4 Rigid Triangle For a right triangle. Unit mass Sides y γ = constant, a, b Centre of Mass x G = a/, y G = b/ Total Mass m = γab/, Moment of Inertia J = m a + b 8 G a = γ a b + ab 6 b Rigid Oval When a = b = D = R the oval is a circle. y Unit mass Axes b a γ = constant, a, b Centre of Mass x G = y G = Total Mass m = γ πab, Moment of Inertia J = m a + b 6 x trabacolo p(x,t) = P x/a f(t) c k c k m, J a a a a a a The mass of the left bar is m = m a and its moment of inertia is (a) J = m = a m /. The maximum value of the external load is P max = P a/a = P and the resultant of triangular load is R = P a/ = 8P a N
5 Forces and Virtual Displacements J Z a 8P a f(t) Z(t) J Z a N cż m Z δθ = /(a) kz c Ż m Z δθ = /(a) kz δu u = 7a a cos θ a cos θ, δu = a sin θ δθ + a sin θ δθ δθ = /(a), δθ = /(a) sin θ Z/(a), sin θ Z/(a) δu = ( a + ) a Z = 7 a Z Principle of Virtual Displacements cż J Z a m Z 8P a f(t) δθ = /(a) kz cż Z(t) J Z a m Z kz δθ = /(a) N The virtual work of the InertialDampingElasticExternal forces: Z δw I = m J Z a = a m Z ) ( m + m 9 + J 6a + J 9a Ż δw D = c δw S = k Z δu J Z a Z a c Z = (c + c /6) Ż ( k Z = 9k 6 + k ) Z 9 δw Ext = 8P a f(t) + N 7 a Z _ Principle of Virtual Displacements For a rigid body in condition of equilibrium the total virtual work must be equal to zero δw I + δw D + δw S + δw Ext = Substituting our expressions of the virtual work contributions and simplifying, the equation of equilibrium is ( m + m 9 + J 6a + J ) Z+ 9a ( + (c + c /6) Ż + 9k 6 + k 9 ) Z = 8P a f(t) + N 7 a Z
6 Principle of Virtual Displacements Collecting Z and its time derivatives give us m Z + c Ż + k Z = p f(t) introducing the so called generalised properties, in our example it is m = m + 9 9m + 6a J + 9a J, c = 6 c + c, k = 9 6 k + 9 k 7 a N, p = 6 P a. It is worth writing down the expression of k : k = 9k 6 + k 9 7 a N Geometrical stiffness Let s start with an example... Consider a cantilever, with varying properties m and EJ, subjected to a load that is function of both time t and position x, p = p(x, t). The transverse displacements v will be function of time and position, x H v = v(x, t) v(x, t) p(x, t) N EJ = EJ(x) m = m(x)... and an hypothesis To study the previous problem, we introduce an approximate model by the following hypothesis, v(x, t) = Ψ(x) Z(t), that is, the hypothesis of separation of variables Note that Ψ(x), the shape function, is adimensional, while Z(t) is dimensionally a generalised displacement, usually chosen to characterise the structural behaviour. In our example we can use the displacement of the tip of the chimney, thus implying that Ψ(H) = because Z(t) = v(h, t) and v(h, t) = Ψ(H) Z(t)
7 Principle of Virtual Displacements For a flexible system, the PoVD states that, at equilibrium, δw E = δw I. The virtual work of external forces can be easily computed, the virtual work of internal forces is usually approximated by the virtual work done by bending moments, that is δw I M δχ where χ is the curvature and δχ the virtual increment of curvature. δw E The external forces are p(x, t), N and the forces of inertia f I ; we have, by separation of variables, that δv = Ψ(x) and we can write δw p = [ p(x, t)δv dx = δw Inertia = m(x) vδv dx = [ ] = m(x)ψ (x) dx ] p(x, t)ψ(x) dx = p (t) m(x)ψ(x) ZΨ(x) dx Z(t) = m Z. The virtual work done by the axial force deserves a separate treatment... δw N The virtual work of N is δw N = Nδu where δu is the variation of the vertical displacement of the top of the chimney. We start computing the vertical displacement of the top of the chimney in terms of the rotation of the axis line, φ Ψ (x)z(t), u(t) = H cos φ dx = ( cos φ) dx, substituting the well known approximation cosφ φ we have φ u(t) = dx = Ψ (x)z (t) dx hence and δu = [ δw N = Ψ (x)z(t) dx = in the above equation Ψ (x) dx Z ] Ψ (x) dx N Z = kg Z
8 δw Int Approximating the internal work with the work done by bending moments, for an infinitesimal slice of beam we write dw Int = Mv (x, t) dx = MΨ (x)z(t) dx with M = EJ(x)v (x) integrating δ(dw Int ) = EJ(x)Ψ (x)z(t) dx [ δw Int = ] EJ(x)Ψ (x) dx Z = k Z the shape function must respect the geometrical boundary conditions of the problem, i.e., both Ψ = x and Ψ = cos πx H are accettable shape functions for our example, as Ψ () = Ψ () = and Ψ () = Ψ () = better results are obtained when the second derivative of the shape function at least resembles the typical distribution of bending moments in our problem, so that between Ψ = constant and Ψ = π πx cos H H the second choice is preferable..5 f =-cos(pi*x/) f =x f " f ".8 vi"/z(t).5.6. v/z(t) x/h
9 Example Using Ψ(x) = cos πx H, with m = constant and EJ = constant, with a load characteristic of seismic excitation, p(t) = m v g (t), m = m ( cos πx H ) dx = m( π )H π k = EJ 6H k G = N π H p g = m v g (t) cos πx π EJ dx = H H sin πx H dx = π 8H N cos πx H dx = ( ) mh v g (t) π Analysis The process of estimating the vibration characteristics of a complex system is known as vibration analysis. We can use our previous results for flexible systems, based on the SDOF model, to give an estimate of the natural frequency ω = k /m A different approach, proposed by Lord Rayleigh, starts from different premises to give the same results but the Quotient method is important because it offers a better understanding of the vibrational behaviour, eventually leading to successive refinements of the first estimate of ω. Quotient Our focus will be on the free vibration of a flexible, undamped system. inspired by the free vibrations of a proper SDOF we write Z(t) = Z sin ωt v(x, t) = Z Ψ(x) sin ωt, and v(x, t) = ω Z Ψ(x) cos ωt. the displacement and the velocity are in quadrature: when v is at its maximum v =, hence V = V max, T = and when v is at its maximum it is v =, hence V =, T = T max, disregarding damping, the energy of the system is constant during free vibrations, V max + = + T max
10 Rayleigh s Quotient Now we write the expressions for V max and T max, V max = Z EJ(x)Ψ (x) dx, S T max = ω Z m(x)ψ (x) dx, equating the two expressions and solving for ω we have ω S = EJ(x)Ψ (x) dx S m(x)ψ (x) dx. S Recognizing the expressions we found for k and m we could question the utility of Quotient... Quotient in method we know the specific time dependency of the inertial forces f I = m(x) v = m(x)ω Z Ψ(x) sin ωt f I has the same shape we use for displacements. if Ψ were the real shape assumed by the structure in free vibrations, the displacements v due to a loading f I = ω m(x)ψ(x)z should be proportional to Ψ(x) through a constant factor, with equilibrium respected in every point of the structure during free vibrations. starting from a shape function Ψ (x), a new shape function Ψ can be determined normalizing the displacements due to the inertial forces associated with Ψ (x), f I = m(x)ψ (x), we are going to demonstrate that the new shape function is a better approximation of the true mode shape mode shapes Given different shape functions Ψ i and considering the true shape of free vibration Ψ, in the former cases equilibrium is not respected by the structure itself. To keep inertia induced deformation proportional to Ψ i we must consider the presence of additional elastic constraints. This leads to the following considerations the frequency of vibration of a structure with additional constraints is higher than the true natural frequency, the criterium to discriminate between different shape functions is: better shape functions give lower estimates of the natural frequency, the true natural frequency being a lower bound of all estimates.
11 mode shapes In general the selection of trial shapes goes through two steps,. the analyst considers the flexibilities of different parts of the structure and the presence of symmetries to devise an approximate shape,. the structure is loaded with constant loads directed as the assumed displacements, the displacements are computed and used as the shape function, of course a little practice helps a lot in the the choice of a proper pattern of loading... mode shapes p = m(x) P = M p = m(x) (a) (b) p = m(x) (c) (d) p = m(x) Refinement R Choose a trial function Ψ () (x) and write our first estimate R of ω is v () = Ψ () (x)z () sin ωt V max = Z() EJΨ () dx T max = ω Z () mψ () dx ω = EJΨ () dx mψ () dx.
12 Refinement R We try to give a better estimate of V max computing the external work done by the inertial forces, the deflections due to p () are p () = ω m(x)v () = Z () ω Ψ () (x) v () = ω v() ω = ω () Z() Ψ ω = ω Ψ () Z(), where we write Z () because we need to keep the unknown ω in evidence. The maximum strain energy is V max = p () v () dx = ω () Z Z() m(x)ψ () Ψ () dx Equating to our previus estimate of T max we find the R estimate ω = Z() Z () m(x)ψ () Ψ () dx m(x)ψ () Ψ () dx Refinement R With little additional effort it is possible to compute T max from v () : T max = ω m(x)v () dx = ω6 Z() m(x)ψ () dx equating to our last approximation for V max we have the R approximation to the frequency of vibration, ω = Z() Z () m(x)ψ () Ψ () dx m(x)ψ () Ψ () dx. Of course the procedure can be extended to compute better and better estimates of ω but usually the refinements are not extended beyond R, because it would be contradictory with the quick estimate nature of the Quotient method and also because R estimates are usually very good ones. Refinement Example m.5m m k k k.5 /5 6/5 Ψ () p() ω m Ψ () T = ω.5 m Z V = k Z ω = k 9/ m = k m v () = 5 Z () = 5 m k ω Ψ () m k V () = m 5 m k ω ( + / + /5) = m 5 m 87 ω k ω = 9 m m 87 8 m k = k 9 m =.8 k m
Generalized Single Degree of Freedom Systems
Single Degree of Freedom http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano April, 16 Outline Until now our were described
More informationGiacomo Boffi. April 7, 2016
http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano April 7, 2016 Outline Analysis The process of estimating the vibration
More informationMulti Degrees of Freedom Systems
Multi Degrees of Freedom Systems MDOF s http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano March 9, 07 Outline, a System
More informationStructural Matrices in MDOF Systems
in MDOF Systems http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano April 9, 2016 Outline Additional Static Condensation
More informationOutline. Structural Matrices. Giacomo Boffi. Introductory Remarks. Structural Matrices. Evaluation of Structural Matrices
Outline in MDOF Systems Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano May 8, 014 Additional Today we will study the properties of structural matrices, that is the operators that
More informationMatrix Iteration. Giacomo Boffi.
http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano April 12, 2016 Outline Second -Ritz Method Dynamic analysis of MDOF
More informationOutline of parts 1 and 2
to Harmonic Loading http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano March, 6 Outline of parts and of an Oscillator
More informationIntroduction to structural dynamics
Introduction to structural dynamics p n m n u n p n-1 p 3... m n-1 m 3... u n-1 u 3 k 1 c 1 u 1 u 2 k 2 m p 1 1 c 2 m2 p 2 k n c n m n u n p n m 2 p 2 u 2 m 1 p 1 u 1 Static vs dynamic analysis Static
More informationTruncation Errors Numerical Integration Multiple Support Excitation
Errors Numerical Integration Multiple Support Excitation http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano April 10,
More informationDr.Vinod Hosur, Professor, Civil Engg.Dept., Gogte Institute of Technology, Belgaum
STRUCTURAL DYNAMICS Dr.Vinod Hosur, Professor, Civil Engg.Dept., Gogte Institute of Technology, Belgaum Overview of Structural Dynamics Structure Members, joints, strength, stiffness, ductility Structure
More informationStructural Dynamics Lecture 4. Outline of Lecture 4. Multi-Degree-of-Freedom Systems. Formulation of Equations of Motions. Undamped Eigenvibrations.
Outline of Multi-Degree-of-Freedom Systems Formulation of Equations of Motions. Newton s 2 nd Law Applied to Free Masses. D Alembert s Principle. Basic Equations of Motion for Forced Vibrations of Linear
More informationStructural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian
Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian ahmadian@iust.ac.ir Dynamic Response of MDOF Systems: Mode-Superposition Method Mode-Superposition Method:
More informationIntroduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams.
Outline of Continuous Systems. Introduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams. Vibrations of Flexible Strings. Torsional Vibration of Rods. Bernoulli-Euler Beams.
More informationEQUIVALENT SINGLE-DEGREE-OF-FREEDOM SYSTEM AND FREE VIBRATION
1 EQUIVALENT SINGLE-DEGREE-OF-FREEDOM SYSTEM AND FREE VIBRATION The course on Mechanical Vibration is an important part of the Mechanical Engineering undergraduate curriculum. It is necessary for the development
More informationGiacomo Boffi. Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano
http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano April 21, 2017 Outline of Structural Members Elastic-plastic Idealization
More informationChapter 2: Rigid Bar Supported by Two Buckled Struts under Axial, Harmonic, Displacement Excitation..14
Table of Contents Chapter 1: Research Objectives and Literature Review..1 1.1 Introduction...1 1.2 Literature Review......3 1.2.1 Describing Vibration......3 1.2.2 Vibration Isolation.....6 1.2.2.1 Overview.
More informationCIVL 8/7117 Chapter 12 - Structural Dynamics 1/75. To discuss the dynamics of a single-degree-of freedom springmass
CIV 8/77 Chapter - /75 Introduction To discuss the dynamics of a single-degree-of freedom springmass system. To derive the finite element equations for the time-dependent stress analysis of the one-dimensional
More informationSTRUCTURAL DYNAMICS BASICS:
BASICS: STRUCTURAL DYNAMICS Real-life structures are subjected to loads which vary with time Except self weight of the structure, all other loads vary with time In many cases, this variation of the load
More informationChapter 5 Structural Elements: The truss & beam elements
Institute of Structural Engineering Page 1 Chapter 5 Structural Elements: The truss & beam elements Institute of Structural Engineering Page 2 Chapter Goals Learn how to formulate the Finite Element Equations
More informationFinal Exam Solution Dynamics :45 12:15. Problem 1 Bateau
Final Exam Solution Dynamics 2 191157140 31-01-2013 8:45 12:15 Problem 1 Bateau Bateau is a trapeze act by Cirque du Soleil in which artists perform aerial maneuvers on a boat shaped structure. The boat
More informationDynamics of structures
Dynamics of structures 2.Vibrations: single degree of freedom system Arnaud Deraemaeker (aderaema@ulb.ac.be) 1 Outline of the chapter *One degree of freedom systems in real life Hypothesis Examples *Response
More informationEngineering Mechanics Prof. U. S. Dixit Department of Mechanical Engineering Indian Institute of Technology, Guwahati Introduction to vibration
Engineering Mechanics Prof. U. S. Dixit Department of Mechanical Engineering Indian Institute of Technology, Guwahati Introduction to vibration Module 15 Lecture 38 Vibration of Rigid Bodies Part-1 Today,
More informationTOPIC E: OSCILLATIONS SPRING 2019
TOPIC E: OSCILLATIONS SPRING 2019 1. Introduction 1.1 Overview 1.2 Degrees of freedom 1.3 Simple harmonic motion 2. Undamped free oscillation 2.1 Generalised mass-spring system: simple harmonic motion
More informationD : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each.
GTE 2016 Q. 1 Q. 9 carry one mark each. D : SOLID MECHNICS Q.1 single degree of freedom vibrating system has mass of 5 kg, stiffness of 500 N/m and damping coefficient of 100 N-s/m. To make the system
More informationModule 4 : Deflection of Structures Lecture 4 : Strain Energy Method
Module 4 : Deflection of Structures Lecture 4 : Strain Energy Method Objectives In this course you will learn the following Deflection by strain energy method. Evaluation of strain energy in member under
More informationPart D: Frames and Plates
Part D: Frames and Plates Plane Frames and Thin Plates A Beam with General Boundary Conditions The Stiffness Method Thin Plates Initial Imperfections The Ritz and Finite Element Approaches A Beam with
More informationIntroduction to Vibration. Professor Mike Brennan
Introduction to Vibration Professor Mie Brennan Introduction to Vibration Nature of vibration of mechanical systems Free and forced vibrations Frequency response functions Fundamentals For free vibration
More informationChapter 23: Principles of Passive Vibration Control: Design of absorber
Chapter 23: Principles of Passive Vibration Control: Design of absorber INTRODUCTION The term 'vibration absorber' is used for passive devices attached to the vibrating structure. Such devices are made
More informationFinite Element Analysis Prof. Dr. B. N. Rao Department of Civil Engineering Indian Institute of Technology, Madras. Module - 01 Lecture - 13
Finite Element Analysis Prof. Dr. B. N. Rao Department of Civil Engineering Indian Institute of Technology, Madras (Refer Slide Time: 00:25) Module - 01 Lecture - 13 In the last class, we have seen how
More informationMore Examples Of Generalized Coordinates
Slides of ecture 8 Today s Class: Review Of Homework From ecture 7 Hamilton s Principle More Examples Of Generalized Coordinates Calculating Generalized Forces Via Virtual Work /3/98 /home/djsegal/unm/vibcourse/slides/ecture8.frm
More informationAdvanced Vibrations. Elements of Analytical Dynamics. By: H. Ahmadian Lecture One
Advanced Vibrations Lecture One Elements of Analytical Dynamics By: H. Ahmadian ahmadian@iust.ac.ir Elements of Analytical Dynamics Newton's laws were formulated for a single particle Can be extended to
More informationFinal Exam December 11, 2017
Final Exam Instructions: You have 120 minutes to complete this exam. This is a closed-book, closed-notes exam. You are NOT allowed to use a calculator with communication capabilities during the exam. Usage
More information2C9 Design for seismic and climate changes. Jiří Máca
2C9 Design for seismic and climate changes Jiří Máca List of lectures 1. Elements of seismology and seismicity I 2. Elements of seismology and seismicity II 3. Dynamic analysis of single-degree-of-freedom
More informationIntroduction to Finite Element Method
Introduction to Finite Element Method Dr. Rakesh K Kapania Aerospace and Ocean Engineering Department Virginia Polytechnic Institute and State University, Blacksburg, VA AOE 524, Vehicle Structures Summer,
More informationM.S Comprehensive Examination Analysis
UNIVERSITY OF CALIFORNIA, BERKELEY Spring Semester 2014 Dept. of Civil and Environmental Engineering Structural Engineering, Mechanics and Materials Name:......................................... M.S Comprehensive
More informationFinite Element Analysis Prof. Dr. B. N. Rao Department of Civil Engineering Indian Institute of Technology, Madras. Module - 01 Lecture - 11
Finite Element Analysis Prof. Dr. B. N. Rao Department of Civil Engineering Indian Institute of Technology, Madras Module - 01 Lecture - 11 Last class, what we did is, we looked at a method called superposition
More informationIntroduction to Mechanical Vibration
2103433 Introduction to Mechanical Vibration Nopdanai Ajavakom (NAV) 1 Course Topics Introduction to Vibration What is vibration? Basic concepts of vibration Modeling Linearization Single-Degree-of-Freedom
More informationEngineering Science OUTCOME 2 - TUTORIAL 3 FREE VIBRATIONS
Unit 2: Unit code: QCF Level: 4 Credit value: 5 Engineering Science L/60/404 OUTCOME 2 - TUTORIAL 3 FREE VIBRATIONS UNIT CONTENT OUTCOME 2 Be able to determine the behavioural characteristics of elements
More information2 marks Questions and Answers
1. Define the term strain energy. A: Strain Energy of the elastic body is defined as the internal work done by the external load in deforming or straining the body. 2. Define the terms: Resilience and
More informationEFFECTIVE MODAL MASS & MODAL PARTICIPATION FACTORS Revision F
EFFECTIVE MODA MASS & MODA PARTICIPATION FACTORS Revision F By Tom Irvine Email: tomirvine@aol.com March 9, 1 Introduction The effective modal mass provides a method for judging the significance of a vibration
More informationVirtual Work and Variational Principles
Virtual Work and Principles Mathematically, the structural analysis problem is a boundary value problem (BVP). Forces, displacements, stresses, and strains are connected and computed within the framework
More informationContinuum Models of Discrete Particle Systems with Particle Shape Considered
Introduction Continuum Models of Discrete Particle Systems with Particle Shape Considered Matthew R. Kuhn 1 Ching S. Chang 2 1 University of Portland 2 University of Massachusetts McMAT Mechanics and Materials
More informationDynamic Model of a Badminton Stroke
ISEA 28 CONFERENCE Dynamic Model of a Badminton Stroke M. Kwan* and J. Rasmussen Department of Mechanical Engineering, Aalborg University, 922 Aalborg East, Denmark Phone: +45 994 9317 / Fax: +45 9815
More informationAnalytical Dynamics: Lagrange s Equation and its Application A Brief Introduction
Analytical Dynamics: Lagrange s Equation and its Application A Brief Introduction D. S. Stutts, Ph.D. Associate Professor of Mechanical Engineering Missouri University of Science and Technology Rolla,
More informationReview of Strain Energy Methods and Introduction to Stiffness Matrix Methods of Structural Analysis
uke University epartment of Civil and Environmental Engineering CEE 42L. Matrix Structural Analysis Henri P. Gavin Fall, 22 Review of Strain Energy Methods and Introduction to Stiffness Matrix Methods
More informationFinal Exam April 30, 2013
Final Exam Instructions: You have 120 minutes to complete this exam. This is a closed-book, closed-notes exam. You are allowed to use a calculator during the exam. Usage of mobile phones and other electronic
More informationVibrations Qualifying Exam Study Material
Vibrations Qualifying Exam Study Material The candidate is expected to have a thorough understanding of engineering vibrations topics. These topics are listed below for clarification. Not all instructors
More informationStructural Dynamics A Graduate Course in Aerospace Engineering
Structural Dynamics A Graduate Course in Aerospace Engineering By: H. Ahmadian ahmadian@iust.ac.ir The Science and Art of Structural Dynamics What do all the followings have in common? > A sport-utility
More information1 Static Plastic Behaviour of Beams
1 Static Plastic Behaviour of Beams 1.1 Introduction Many ductile materials which are used in engineering practice have a considerable reserve capacity beyond the initial yield condition. The uniaxial
More informationName: Fall 2014 CLOSED BOOK
Name: Fall 2014 1. Rod AB with weight W = 40 lb is pinned at A to a vertical axle which rotates with constant angular velocity ω =15 rad/s. The rod position is maintained by a horizontal wire BC. Determine
More informationStructural Dynamics. Spring mass system. The spring force is given by and F(t) is the driving force. Start by applying Newton s second law (F=ma).
Structural Dynamics Spring mass system. The spring force is given by and F(t) is the driving force. Start by applying Newton s second law (F=ma). We will now look at free vibrations. Considering the free
More informationA HIGHER-ORDER BEAM THEORY FOR COMPOSITE BOX BEAMS
A HIGHER-ORDER BEAM THEORY FOR COMPOSITE BOX BEAMS A. Kroker, W. Becker TU Darmstadt, Department of Mechanical Engineering, Chair of Structural Mechanics Hochschulstr. 1, D-64289 Darmstadt, Germany kroker@mechanik.tu-darmstadt.de,
More informationTable of Contents. Preface... 13
Table of Contents Preface... 13 Chapter 1. Vibrations of Continuous Elastic Solid Media... 17 1.1. Objective of the chapter... 17 1.2. Equations of motion and boundary conditions of continuous media...
More informationVIBRATION PROBLEMS IN ENGINEERING
VIBRATION PROBLEMS IN ENGINEERING FIFTH EDITION W. WEAVER, JR. Professor Emeritus of Structural Engineering The Late S. P. TIMOSHENKO Professor Emeritus of Engineering Mechanics The Late D. H. YOUNG Professor
More informationMechanics of Inflatable Fabric Beams
Copyright c 2008 ICCES ICCES, vol.5, no.2, pp.93-98 Mechanics of Inflatable Fabric Beams C. Wielgosz 1,J.C.Thomas 1,A.LeVan 1 Summary In this paper we present a summary of the behaviour of inflatable fabric
More informationFINAL EXAMINATION. (CE130-2 Mechanics of Materials)
UNIVERSITY OF CLIFORNI, ERKELEY FLL SEMESTER 001 FINL EXMINTION (CE130- Mechanics of Materials) Problem 1: (15 points) pinned -bar structure is shown in Figure 1. There is an external force, W = 5000N,
More informationCOPYRIGHTED MATERIAL. Index
Index A Admissible function, 163 Amplification factor, 36 Amplitude, 1, 22 Amplitude-modulated carrier, 630 Amplitude ratio, 36 Antinodes, 612 Approximate analytical methods, 647 Assumed modes method,
More informationMeasurement Techniques for Engineers. Motion and Vibration Measurement
Measurement Techniques for Engineers Motion and Vibration Measurement Introduction Quantities that may need to be measured are velocity, acceleration and vibration amplitude Quantities useful in predicting
More informationWEEKS 8-9 Dynamics of Machinery
WEEKS 8-9 Dynamics of Machinery References Theory of Machines and Mechanisms, J.J.Uicker, G.R.Pennock ve J.E. Shigley, 2011 Mechanical Vibrations, Singiresu S. Rao, 2010 Mechanical Vibrations: Theory and
More informationDynamics of Structures
Dynamics of Structures Elements of structural dynamics Roberto Tomasi 11.05.2017 Roberto Tomasi Dynamics of Structures 11.05.2017 1 / 22 Overview 1 SDOF system SDOF system Equation of motion Response spectrum
More informationThe CR Formulation: BE Plane Beam
6 The CR Formulation: BE Plane Beam 6 Chapter 6: THE CR FORMUATION: BE PANE BEAM TABE OF CONTENTS Page 6. Introduction..................... 6 4 6.2 CR Beam Kinematics................. 6 4 6.2. Coordinate
More informationMechanics PhD Preliminary Spring 2017
Mechanics PhD Preliminary Spring 2017 1. (10 points) Consider a body Ω that is assembled by gluing together two separate bodies along a flat interface. The normal vector to the interface is given by n
More informationME 475 Modal Analysis of a Tapered Beam
ME 475 Modal Analysis of a Tapered Beam Objectives: 1. To find the natural frequencies and mode shapes of a tapered beam using FEA.. To compare the FE solution to analytical solutions of the vibratory
More informationGyroscopic matrixes of the straight beams and the discs
Titre : Matrice gyroscopique des poutres droites et des di[...] Date : 29/05/2013 Page : 1/12 Gyroscopic matrixes of the straight beams and the discs Summarized: This document presents the formulation
More informationInternational Journal of Emerging Technologies in Computational and Applied Sciences (IJETCAS)
International Association of Scientific Innovation and Research (IASIR) (An Association Unifying the Sciences, Engineering, and Applied Research) International Journal of Emerging Technologies in Computational
More informationConsider an elastic spring as shown in the Fig.2.4. When the spring is slowly
.3 Strain Energy Consider an elastic spring as shown in the Fig..4. When the spring is slowly pulled, it deflects by a small amount u 1. When the load is removed from the spring, it goes back to the original
More informationPreliminary Examination - Dynamics
Name: University of California, Berkeley Fall Semester, 2018 Problem 1 (30% weight) Preliminary Examination - Dynamics An undamped SDOF system with mass m and stiffness k is initially at rest and is then
More informationCE 6701 Structural Dynamics and Earthquake Engineering Dr. P. Venkateswara Rao
CE 6701 Structural Dynamics and Earthquake Engineering Dr. P. Venkateswara Rao Associate Professor Dept. of Civil Engineering SVCE, Sriperumbudur Difference between static loading and dynamic loading Degree
More information202 Index. failure, 26 field equation, 122 force, 1
Index acceleration, 12, 161 admissible function, 155 admissible stress, 32 Airy's stress function, 122, 124 d'alembert's principle, 165, 167, 177 amplitude, 171 analogy, 76 anisotropic material, 20 aperiodic
More informationTheory and Practice of Rotor Dynamics Prof. Dr. Rajiv Tiwari Department of Mechanical Engineering Indian Institute of Technology Guwahati
Theory and Practice of Rotor Dynamics Prof. Dr. Rajiv Tiwari Department of Mechanical Engineering Indian Institute of Technology Guwahati Module - 2 Simpul Rotors Lecture - 2 Jeffcott Rotor Model In the
More informationModeling and Experimentation: Mass-Spring-Damper System Dynamics
Modeling and Experimentation: Mass-Spring-Damper System Dynamics Prof. R.G. Longoria Department of Mechanical Engineering The University of Texas at Austin July 20, 2014 Overview 1 This lab is meant to
More informationIf the number of unknown reaction components are equal to the number of equations, the structure is known as statically determinate.
1 of 6 EQUILIBRIUM OF A RIGID BODY AND ANALYSIS OF ETRUCTURAS II 9.1 reactions in supports and joints of a two-dimensional structure and statically indeterminate reactions: Statically indeterminate structures
More informationA consistent dynamic finite element formulation for a pipe using Euler parameters
111 A consistent dynamic finite element formulation for a pipe using Euler parameters Ara Arabyan and Yaqun Jiang Department of Aerospace and Mechanical Engineering, University of Arizona, Tucson, AZ 85721,
More informationSPECIAL DYNAMIC SOIL- STRUCTURE ANALYSIS PROCEDURES DEMONSTATED FOR TWO TOWER-LIKE STRUCTURES
2010/2 PAGES 1 8 RECEIVED 21. 9. 2009 ACCEPTED 20. 1. 2010 Y. KOLEKOVÁ, M. PETRONIJEVIĆ, G. SCHMID SPECIAL DYNAMIC SOIL- STRUCTURE ANALYSIS PROCEDURES DEMONSTATED FOR TWO TOWER-LIKE STRUCTURES ABSTRACT
More informationANALYSIS OF LOAD PATTERNS IN RUBBER COMPONENTS FOR VEHICLES
ANALYSIS OF LOAD PATTERNS IN RUBBER COMPONENTS FOR VEHICLES Jerome Merel formerly at Hutchinson Corporate Research Center Israël Wander Apex Technologies Pierangelo Masarati, Marco Morandini Dipartimento
More informationCHAPTER 12 OSCILLATORY MOTION
CHAPTER 1 OSCILLATORY MOTION Before starting the discussion of the chapter s concepts it is worth to define some terms we will use frequently in this chapter: 1. The period of the motion, T, is the time
More informationFree Vibration of Single-Degree-of-Freedom (SDOF) Systems
Free Vibration of Single-Degree-of-Freedom (SDOF) Systems Procedure in solving structural dynamics problems 1. Abstraction/modeling Idealize the actual structure to a simplified version, depending on the
More informationIntroduction to Vibration. Mike Brennan UNESP, Ilha Solteira São Paulo Brazil
Introduction to Vibration Mike Brennan UNESP, Ilha Solteira São Paulo Brazil Vibration Most vibrations are undesirable, but there are many instances where vibrations are useful Ultrasonic (very high
More informationMath Assignment 5
Math 2280 - Assignment 5 Dylan Zwick Fall 2013 Section 3.4-1, 5, 18, 21 Section 3.5-1, 11, 23, 28, 35, 47, 56 Section 3.6-1, 2, 9, 17, 24 1 Section 3.4 - Mechanical Vibrations 3.4.1 - Determine the period
More information[8] Bending and Shear Loading of Beams
[8] Bending and Shear Loading of Beams Page 1 of 28 [8] Bending and Shear Loading of Beams [8.1] Bending of Beams (will not be covered in class) [8.2] Bending Strain and Stress [8.3] Shear in Straight
More informationRigid Body Kinetics :: Virtual Work
Rigid Body Kinetics :: Virtual Work Work-energy relation for an infinitesimal displacement: du = dt + dv (du :: total work done by all active forces) For interconnected systems, differential change in
More informationChapter 12 Plate Bending Elements. Chapter 12 Plate Bending Elements
CIVL 7/8117 Chapter 12 - Plate Bending Elements 1/34 Chapter 12 Plate Bending Elements Learning Objectives To introduce basic concepts of plate bending. To derive a common plate bending element stiffness
More informationENGINEERING COUNCIL DYNAMICS OF MECHANICAL SYSTEMS D225 TUTORIAL 10 NATURAL VIBRATIONS ONE DEGREE OF FREEDOM
ENGINEERING COUNCIL DYNAMICS OF MECHANICAL SYSTEMS D5 TUTORIAL 0 NATURAL VIBRATIONS ONE DEGREE OF FREEDOM On completion of this tutorial you should be able to do the following. Explain the meaning of degrees
More informationFREE VIBRATIONS OF UNIFORM TIMOSHENKO BEAMS ON PASTERNAK FOUNDATION USING COUPLED DISPLACEMENT FIELD METHOD
A R C H I V E O F M E C H A N I C A L E N G I N E E R I N G VOL. LXIV 17 Number 3 DOI: 1.1515/meceng-17- Key words: free vibrations, Coupled Displacement Field method, uniform Timoshenko beam, Pasternak
More informationANALYSIS OF HIGHRISE BUILDING STRUCTURE WITH SETBACK SUBJECT TO EARTHQUAKE GROUND MOTIONS
ANALYSIS OF HIGHRISE BUILDING SRUCURE WIH SEBACK SUBJEC O EARHQUAKE GROUND MOIONS 157 Xiaojun ZHANG 1 And John L MEEK SUMMARY he earthquake response behaviour of unframed highrise buildings with setbacks
More informationLecture 7: The Beam Element Equations.
4.1 Beam Stiffness. A Beam: A long slender structural component generally subjected to transverse loading that produces significant bending effects as opposed to twisting or axial effects. MECH 40: Finite
More informationAdvanced Structural Analysis EGF Section Properties and Bending
Advanced Structural Analysis EGF316 3. Section Properties and Bending 3.1 Loads in beams When we analyse beams, we need to consider various types of loads acting on them, for example, axial forces, shear
More informationAppendix C. Modal Analysis of a Uniform Cantilever with a Tip Mass. C.1 Transverse Vibrations. Boundary-Value Problem
Appendix C Modal Analysis of a Uniform Cantilever with a Tip Mass C.1 Transverse Vibrations The following analytical modal analysis is given for the linear transverse vibrations of an undamped Euler Bernoulli
More informationStep 1: Mathematical Modeling
083 Mechanical Vibrations Lesson Vibration Analysis Procedure The analysis of a vibrating system usually involves four steps: mathematical modeling derivation of the governing uations solution of the uations
More information6. Bending CHAPTER OBJECTIVES
CHAPTER OBJECTIVES Determine stress in members caused by bending Discuss how to establish shear and moment diagrams for a beam or shaft Determine largest shear and moment in a member, and specify where
More informationVTU-NPTEL-NMEICT Project
MODULE-II --- SINGLE DOF FREE S VTU-NPTEL-NMEICT Project Progress Report The Project on Development of Remaining Three Quadrants to NPTEL Phase-I under grant in aid NMEICT, MHRD, New Delhi SME Name : Course
More informationFinite Element Analysis Prof. Dr. B. N. Rao Department of Civil Engineering Indian Institute of Technology, Madras. Lecture - 06
Finite Element Analysis Prof. Dr. B. N. Rao Department of Civil Engineering Indian Institute of Technology, Madras Lecture - 06 In the last lecture, we have seen a boundary value problem, using the formal
More informationSTATICALLY INDETERMINATE STRUCTURES
STATICALLY INDETERMINATE STRUCTURES INTRODUCTION Generally the trusses are supported on (i) a hinged support and (ii) a roller support. The reaction components of a hinged support are two (in horizontal
More informationJEPPIAAR ENGINEERING COLLEGE
JEPPIAAR ENGINEERING COLLEGE Jeppiaar Nagar, Rajiv Gandhi Salai 600 119 DEPARTMENT OFMECHANICAL ENGINEERING QUESTION BANK VI SEMESTER ME6603 FINITE ELEMENT ANALYSIS Regulation 013 SUBJECT YEAR /SEM: III
More informationShape Optimization of Revolute Single Link Flexible Robotic Manipulator for Vibration Suppression
15 th National Conference on Machines and Mechanisms NaCoMM011-157 Shape Optimization of Revolute Single Link Flexible Robotic Manipulator for Vibration Suppression Sachindra Mahto Abstract In this work,
More informationComputational Simulation of Dynamic Response of Vehicle Tatra T815 and the Ground
IOP Conference Series: Earth and Environmental Science PAPER OPEN ACCESS Computational Simulation of Dynamic Response of Vehicle Tatra T815 and the Ground To cite this article: Jozef Vlek and Veronika
More informationAA242B: MECHANICAL VIBRATIONS
AA242B: MECHANICAL VIBRATIONS 1 / 50 AA242B: MECHANICAL VIBRATIONS Undamped Vibrations of n-dof Systems These slides are based on the recommended textbook: M. Géradin and D. Rixen, Mechanical Vibrations:
More informationAPPLIED MATHEMATICS AM 02
AM SYLLABUS (2013) APPLIED MATHEMATICS AM 02 SYLLABUS Applied Mathematics AM 02 Syllabus (Available in September) Paper I (3 hrs)+paper II (3 hrs) Applied Mathematics (Mechanics) Aims A course based on
More informationEVALUATING DYNAMIC STRESSES OF A PIPELINE
EVALUATING DYNAMIC STRESSES OF A PIPELINE by K.T. TRUONG Member ASME Mechanical & Piping Division THE ULTRAGEN GROUP LTD 2255 Rue De La Province Longueuil (Quebec) J4G 1G3 This document is provided to
More informationCHAPTER 14 BUCKLING ANALYSIS OF 1D AND 2D STRUCTURES
CHAPTER 14 BUCKLING ANALYSIS OF 1D AND 2D STRUCTURES 14.1 GENERAL REMARKS In structures where dominant loading is usually static, the most common cause of the collapse is a buckling failure. Buckling may
More information