Chapter 6: Applications of Integration

Transcription

1 Chapter 6: Applications of Integration

2 Section 6.3 Volumes by Cylindrical Shells

3 Sec. 6.3: Volumes: Cylindrical Shell Method Cylindrical Shell Method dv = 2πrh thickness V = න a b 2πrh thickness Thickness is usually dx or dy

4 Sec. 6.3: Volumes: Cylindrical Shell Method Ex 7: Find the volume obtained by rotating the region bounded by y = x 2, y = 0, and x = 1 about the y-axis.

5 Sec. 6.3: Volumes: Cylindrical Shell Method Ex 8: Set up (but do not calculate) the integral that represents the volume obtained when the region between the x-axis and y = sin x from x = 0 to x = π is rotated around the line x = 2.

6 Sec. 6.2: Volumes: Disk/Washer Method Ex 6 again: Find the volume of the solid obtained by rotating the region bounded by xy = 1, y = 0, x = 1, and x = 2 about the line x = 1. Use the cylindrical shells method.

7 Volumes: Which Method? Notes: If your slices are perpendicular to the axis of rotation, you are doing the problem using the disk or washer method If your slices are parallel to the axis of rotation, you are doing the problem using the cylindrical shell method

8 Volumes: Which Method? General Advice: If by slicing in a certain direction you need more than 1 integral to calculate the volume and by slicing in another direction you only need 1 integral to calculate the volume, try the direction that gives you 1 integral first If both ends of your slice land on the SAME CURVE, try slicing in another direction If by slicing in a certain direction you end up with an integral that you are unable to calculate (because either you haven t learn that integration technique yet or that integral is not possible to calculate), try slicing in another direction

9 Section 6.4 Work

10 Definition of Work Situation There is an object whose motion is restricted to a straight line (1-dimensional motion) There is a force applied to the object (sometimes constant, sometimes varying) The direction of the force is always along the line of motion (the force can be in the same direction or in the opposite direction of the direction the object is moving)

11 Definition of Work Definition (Work done by a constant force): If 1) A constant force F is applied to an object 2) The object moves in a straight line in the same direction as the applied force 3) The object s travels a distance d throughout the motion Then the work done by F is W = Fd

12 Definition of Work Definition (Work done by a constant force): If 1) A constant force F is applied to an object 2) The object moves in a straight line in the opposite direction of the applied force 3) The object s travels a distance d throughout the motion Then the work done by F is W = Fd

13 Work Done By A Constant Force Notes: Work is a number and it can be negative Work is always calculated for a force If the units of force is Newtons (N) and the unit of distance is meters (m), then the units of work is Joules (J). If the units of force is pounds (lbs) and the unit of distance is feet (ft), then the units of work is foot-pounds (ft-lbs).

14 Work Done By A Constant Force Notes: Weight is a force (force due to gravity) Mass is not a force. If you are given the mass of an object (usually in kilograms), you can find the object s weight by multiplying by g = 9.8. That is, W = mg If an object is moving at a constant speed, then the net force on the object is 0

15 Work Done By A Constant Force Ex 1: Anthony pushes a box to the right with a force of 30 N while the box moves 25 m to the right. Find the work that Anthony does on the box.

16 Work Done By A Constant Force Ex 2: A 2 kg apple is being pushed up by a hand and is moving up at a constant speed of 0.1 m/s for a distance of 3 m. a) Find the work done by the hand on the apple b) Find the work done by gravity on the apple Ex 3: A 2 kg apple is being pushed up by a hand and is moving down at a constant speed of 0.3 m/s for a distance of 2.8 m. a) Find the work done by the hand on the apple b) Find the work done by gravity on the apple

17 Work Done By A Constant Force Ex 4: A 0.7 lb apple is pushed 4 ft upward by a hand. What is the (minimum) work done on the hand by the apple?

18 Work Done By A Variable Force Question: How do you calculate work if the force on the object is not constant? Answer: Use Calculus Idea: Cut the path of the object into many short paths of length dx For each small distance, the force on the object is approximately constant F The small amount of work dw done by the force over that small trip is F dx

19 Work Done By A Variable Force Question: What if the force on the object is not constant? Answer: Use Calculus Idea: Add all these little works and take the limit as the number of short paths goes to infinity. That is, do an integral W = ± න Fdx Decide if the answer is + or by considering the direction of the motion and direction of the force

20 Work Done By A Variable Force Ex 5: A box is being pushed to the right along the x-axis with a variable force given by F x = x (force is in pounds and distance is in feet). Find the work done on the box by this force as the box moves from x = 0 to x = 4.

21 Work Done By A Variable Force Springs & Hooke s Law: A spring has a natural length If the spring is stretched beyond its natural length (length is longer than its natural length), the spring will apply a force in the direction opposite the direction it was stretched (it tries to get back to its natural length)

22 Work Done By A Variable Force Springs & Hooke s Law: A spring has a natural length If the spring is compressed from its natural length (length is shorter than its natural length), the spring will apply a force in the direction opposite the direction it was compressed (it tries to get back to its natural length)

23 Work Done By A Variable Force Hooke s Law: If a spring is stretched (or compressed) by an amount x, then the magnitude of the force exerted by the spring is F spring = kx F spring = the force exerted by the spring x = the amount the spring is stretched from its natural length k = a number, called the spring constant. (if tells you how hard it is to stretch the spring)

24 Work Done By A Variable Force Ex 6 (book ex. 3, sec. 6.4, pg. 457): A force of 40 N is required to hold a spring that has been stretched from its natural length of 10 cm to a length of 15 cm. How much work is done in stretching the spring from 15 cm to 18 cm?

25 Work Done By A Variable Force Ex 7 (book ex. 4, sec. 6.4, pg. 457): A 200-lb cable is 100 ft long and hangs vertically from the top of a tall building. How much work is required to lift the cable to the top of the building?

26 Work Done By A Variable Force Ex 8 (book ex. 5, sec. 6.4, pg. 457): A tank has the shape of an inverted circular cone with height 10 m and base radius 4 m. It is filled with water to a height of 8 m. Find the work required to empty the tank by pumping all of the water to the top of the tank. (The density of water is 1000 kg/m 3 )