PRO 5W-8. Professional series. SPL vs Freq. Specification. Materials of Construction

Transcription

1 Professional series PRO 5W-8 Small in size, large in performance. Featuring an advanced X5 pulp cone, high temperature copper wire voice coil, and truncated cast frame chassis, the Pro 5W can handle your most demanding midbass, midrange, line array, or column array applications. Midrange Midbass Woofer Subwoofer Bass Guitar Sealed Box Vented Box Scoop Loading Horn Loading Specification THIELE & SMALL PARAMETERS * MOUNTING INFORMATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter 5, 17 mm 8 Ω 75 W 150 W 95 Hz 1 Hz 7.5 khz oz , 8 mm 1, 5 mm Fs Re Le Qms Qes Qts Vas Vd Cms BL Mms EBP Xmax Sd Xlim 95 Hz 5.3 Ω 0.8 mh cu.ft.,.31 liters 19.7 cc 0.7 mm/n.11 T-M grams mm. cm mm Recommended Enclosure Volume Sealed liters, cu.ft. Vented liters, cu.ft. Driver Volume Displaced cu.ft., 0.3 liters Major Diameter 5.5, 133. mm Flat to Flat Diameter.7, 1. mm Baffle Hole Diameter.8, 8.7 mm Front Sealing Gasket Yes Rear Sealing Gasket Yes Mounting Holes Diameter 0.13, 3. mm Mounting Holes B.C.D..79, 11.7 mm Depth.5, 3.5 mm Net Weight.9 lbs, 1.3 kg Shipping Weight 3.3 lbs, 1.5 kg Materials of Construction Copper voice coil Kapton former Ferrite magnet Vented and extended core Die-cast aluminum basket X5 Pulp cone Cloth cone edge Treated paper dust cap FREQUENCY RESPONSE & impedance curve * SPL vs Freq SPL Ohm Hz K K 5K K K learn more at eminence.com

2 From design and manufacturing to the stage or studio. Once you ve experienced the performance of Eminence, you ll never accept anything else. mission statement Eminence is dedicated to providing the best Quality, Value and Service to meet our customers needs. footnotes * Please consult for specifications of models with alternative impedances. ** Multiple units exceed published ratings evaluated under EIA A specification while tested in a free-air, non-temperature-controlled environment. *** The average output across the usable frequency range when applying 1W/1m into the nominal impedance. i.e:.83v/8ω, V/1Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance LMS using 0.5" supplied microphone (software calibrated) mounted 1m from wall/baffle ft. x ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction Carver PM-1 amplifier 700 cu. ft. chamber with fiberglass on all six surfaces (three with custommade wedges). **** BETA 8CX, CX, and 1CX are coaxial speakers with tweeter sold separately. Published usable frequency response contingent upon use of ASD:01 HF Driver. ***** Multiple units exceeded published ratings evaluated under EIA-A or AES specification while mounted on Eminence s H90, H90S, or HEA horn in a non-temperaturecontrolled environment. ******The average on axis output across the entire usable frequency range when applying 1W/1m into the nominal impedance, i.e..83v/8ω, V/1Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance LMS using 0.5 supplied microphone (software calibrated) mounted 1m from wall/baffle ft x ft baffle is built into the wall with horn front mounted Carver PM-1 amplifier 700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges). Prices, specifications and product cosmetics are subject to change without notice. eminence speaker llc Follow us: 838 Mulberry Pike, Eminence, KY 0019

3 PRO-5W-8 Small Vented Midbass Design By Jerry McNutt, Eminence Speaker LLC Thermal Limit of 75 Watts; F3 at 131 Hz. Best used above 10 Hz. For small satellites or midbass use. Box Properties Name: Type: Vented Box Shape: Prism, square (optimum) --Box Parameters-- Vb = 0.07 cu.ft V(total) = cu.ft Fb = 1 Hz QL = 7 F3 = 1.5 Hz Fill = minimal --Vents-- No. of Vents = 1 Vent shape = round Vent ends = one flush Dv = in Lv = 5.03 in Driver Properties Name: PRO-5W-8 Type: Standard one-way driver Company: Eminence Speaker USA Comment: 5" Cast Frame Mid/Bass --Configuration-- No. of Drivers = 1 --Mechanical Parameters-- Fs = 9.3 Hz Qms = 3.35 Vas =.31 liters Cms = 0.7 mm/n Mms =.05 g Rms = 0.7 kg/s Xmax =.95 mm Xmech = mm P-Dia = 91.5 mm Sd =. sq.cm P-Vd = liters --Electrical Parameters-- Qes = 0.35 Re = 5.3 ohms Le = 0.8 mh Z = 8 ohms BL =.11 Tm Pe = 75 watts --Electromech. Parameters-- Qts = no = 1.00 % 1-W SPL = V SPL = 93.8 Normalized Amplitude Response (-SPL/Hz) Hz K 5 K K K Custom Amplitude Response (-SPL/Hz at 1 m) with 75 watts Hz K 5 K K K Maximum Acoustic Power (-SPL/Hz at 1 m) Hz K 5 K K K File: PRO-5W-8SmallVentedMiass75Watts.bb

4 Page Two -- PRO-5W-8SmallVentedMiass75Watts.bb Maximum Electric Input Power (W/Hz) watts Hz K 5 K K K Cone Displacement (mm/hz) with 75 watts mm Hz K 5 K K K Vent Air Velocity ( m/sec/hz) with 75 watts m/s Hz K 5 K K K

5 Page Three -- PRO-5W-8SmallVentedMiass75Watts.bb System Impedance (ohms/hz) ohms Hz K 5 K K K

6 PRO-5W-8 Small Sealed Midrange Design By Jerry McNutt, Eminence Speaker LLC Thermal Limit of 0 Watts; F3 at Hz. Best used above 0 Hz. For use as a midrange driver. Box Properties Name: Type: Closed Box Shape: Prism, square --Box Parameters-- Vb = cu.ft V(total) = cu.ft Qtc = 0.93 QL = F3 = 1.9 Hz Fill = normal Normalized Amplitude Response (-SPL/Hz) Driver Properties Name: PRO-5W-8 Type: Standard one-way driver Company: Eminence Speaker USA Comment: 5" Cast Frame Mid/Bass --Configuration-- No. of Drivers = 1 --Mechanical Parameters-- Fs = 9.3 Hz Qms = 3.35 Vas =.31 liters Cms = 0.7 mm/n Mms =.05 g Rms = 0.7 kg/s Xmax =.95 mm Xmech = mm P-Dia = 91.5 mm Sd =. sq.cm P-Vd = liters --Electrical Parameters-- Qes = 0.35 Re = 5.3 ohms Le = 0.8 mh Z = 8 ohms BL =.11 Tm Pe = 75 watts --Electromech. Parameters-- Qts = no = 1.00 % 1-W SPL = V SPL = Hz K 5 K K K Custom Amplitude Response (-SPL/Hz at 1 m) with 0 watts Hz K 5 K K K Maximum Acoustic Power (-SPL/Hz at 1 m) Hz K 5 K K K File: PRO-5W-8SmallSealedMidrange0Watts.bb

7 Page Two -- PRO-5W-8SmallSealedMidrange0Watts.bb Maximum Electric Input Power (W/Hz) watts Hz K 5 K K K Cone Displacement (mm/hz) with 0 watts mm Hz K 5 K K K System Impedance (ohms/hz) ohms Hz K 5 K K K

8 PRO-5W-8 Two by 5 Vented Midbass By Jerry McNutt, Eminence Speaker LLC Watts; F3 at 115 Hz. Best used above Hz. Twin 5" midbass or satellite design. Box Properties Name: Type: Vented Box Shape: Prism, square --Box Parameters-- Vb = 0.5 cu.ft V(total) = 0.71 cu.ft Fb = 1 Hz QL = 7 F3 = Hz Fill = normal --Vents-- No. of Vents = 1 Vent shape = round Vent ends = one flush Dv = 3 in Lv =.3 in Driver Properties Name: PRO-5W-8 Type: Standard one-way driver Company: Eminence Speaker USA Comment: 5" Cast Frame Mid/Bass --Configuration-- No. of Drivers = Mounting = Standard Wiring = Parallel Drivers sum coherently = Yes --Mechanical Parameters-- Fs = 9.3 Hz Qms = 3.35 Vas =.31 liters [8.] Cms = 0.7 mm/n [0.35] Mms =.05 g [8.1] Rms = 0.7 kg/s [1.] Xmax =.95 mm Xmech = mm P-Dia = 91.5 mm [19.5] Sd =. sq.cm [133.] P-Vd = liters [0.0388] --Electrical Parameters-- Qes = 0.35 Re = 5.3 ohms [.715] Le = 0.8 mh [0.1] Z = 8 ohms [] BL =.11 Tm [.11] Pe = 75 watts [150] --Electromech. Parameters-- Qts = no = 1.00 % [.01] 1-W SPL = 9.17 [95.18].83-V SPL = 93.8 [99.88] Normalized Amplitude Response (-SPL/Hz) Hz K 5 K K K Custom Amplitude Response (-SPL/Hz at 1 m) with watts Hz K 5 K K K Maximum Acoustic Power (-SPL/Hz at 1 m) Hz K 5 K K K File: PRO-5W-8TwinVentedMiassWatts.bb

9 Page Two -- PRO-5W-8TwinVentedMiassWatts.bb Maximum Electric Input Power (W/Hz) watts Hz K 5 K K K Cone Displacement (mm/hz) with watts mm Hz K 5 K K K Vent Air Velocity ( m/sec/hz) with watts m/s Hz K 5 K K K

10 Page Three -- PRO-5W-8TwinVentedMiassWatts.bb System Impedance (ohms/hz) ohms Hz K 5 K K K

11 PRO-5W-8 Four by 5 Vented Midbass Design By Jerry McNutt, Eminence Speaker LLC 0 Watts; F3 at 133Hz. Use above 10 Hz. Building Block for Column Array or Line Array systems. Box Properties Name: Type: Vented Box Shape: Prism, square (optimum) --Box Parameters-- Vb = 0.8 cu.ft V(total) = 0.37 cu.ft Fb = 1 Hz QL = 7 F3 = 133 Hz Fill = minimal --Vents-- No. of Vents = Vent shape = round Vent ends = one flush Dv = 3 in Lv =.807 in Driver Properties Name: PRO-5W-8 Type: Standard one-way driver Company: Eminence Speaker USA Comment: 5" Cast Frame Mid/Bass --Configuration-- No. of Drivers = Mounting = Standard Wiring = Series-Parallel Drivers sum coherently = Yes --Mechanical Parameters-- Fs = 9.3 Hz Qms = 3.35 Vas =.31 liters [17.] Cms = 0.7 mm/n [0.175] Mms =.05 g [1.] Rms = 0.7 kg/s [.88] Xmax =.95 mm Xmech = mm P-Dia = 91.5 mm [183.1] Sd =. sq.cm [.] P-Vd = liters [0.0777] --Electrical Parameters-- Qes = 0.35 Re = 5.3 ohms [5.3] Le = 0.8 mh [0.8] Z = 8 ohms [8] BL =.11 Tm [1.] Pe = 75 watts [0] --Electromech. Parameters-- Qts = no = 1.00 % [.0] 1-W SPL = 9.17 [98.19].83-V SPL = 93.8 [99.88] Normalized Amplitude Response (-SPL/Hz) Hz K 5 K K K Custom Amplitude Response (-SPL/Hz at 1 m) with 0 watts Hz K 5 K K K Maximum Acoustic Power (-SPL/Hz at 1 m) Hz K 5 K K K File: PRO-5W-8QuadArrayVentedMiass0Watts.bb

12 Page Two -- PRO-5W-8QuadArrayVentedMiass0Watts.bb Maximum Electric Input Power (W/Hz) watts Hz K 5 K K K Cone Displacement (mm/hz) with 0 watts mm Hz K 5 K K K Vent Air Velocity ( m/sec/hz) with 0 watts m/s Hz K 5 K K K

13 Page Three -- PRO-5W-8QuadArrayVentedMiass0Watts.bb System Impedance (ohms/hz) ohms Hz K 5 K K K

14 PRO-5W-8 Eight by 5 Column Array Design By Jerry McNutt, Eminence Speaker LLC 00 Watts; F3 at 119 Hz. Best used above Hz. Stack them up and then crank them up! Box Properties Name: Type: Vented Box Shape: Prism, square --Box Parameters-- Vb = 0.85 cu.ft V(total) = 0.99 cu.ft Fb = 18 Hz QL = 7 F3 = Hz Fill = minimal --Vents-- No. of Vents = Vent shape = round Vent ends = one flush Dv = 3 in Lv = 3.81 in Driver Properties Name: PRO-5W-8 Type: Standard one-way driver Company: Eminence Speaker USA Comment: 5" Cast Frame Mid/Bass --Configuration-- No. of Drivers = 8 Mounting = Standard Wiring = Series-Parallel Drivers sum coherently = Yes --Mechanical Parameters-- Fs = 9.3 Hz Qms = 3.35 Vas =.31 liters [3.8] Cms = 0.7 mm/n [0.0875] Mms =.05 g [3.] Rms = 0.7 kg/s [5.7] Xmax =.95 mm Xmech = mm P-Dia = 91.5 mm [59] Sd =. sq.cm [53.8] P-Vd = liters [0.155] --Electrical Parameters-- Qes = 0.35 Re = 5.3 ohms [.715] Le = 0.8 mh [0.1] Z = 8 ohms [] BL =.11 Tm [1.] Pe = 75 watts [00] --Electromech. Parameters-- Qts = no = 1.00 % [8.09] 1-W SPL = 9.17 [1.].83-V SPL = 93.8 [5.9] Normalized Amplitude Response (-SPL/Hz) Hz K 5 K K K Custom Amplitude Response (-SPL/Hz at 1 m) with 00 watts Hz K 5 K K K Maximum Acoustic Power (-SPL/Hz at 1 m) Hz K 5 K K K File: PRO-5W-8EightByFiveColumnArray00Watts.bb

15 Page Two -- PRO-5W-8EightByFiveColumnArray00Watts.bb Maximum Electric Input Power (W/Hz) watts Hz K 5 K K K Cone Displacement (mm/hz) with 00 watts mm Hz K 5 K K K Vent Air Velocity ( m/sec/hz) with 00 watts m/s Hz K 5 K K K

16 Page Three -- PRO-5W-8EightByFiveColumnArray00Watts.bb System Impedance (ohms/hz) ohms Hz K 5 K K K

17 PRO-5W-8 Large Sealed Midrange Design By Jerry McNutt, Eminence Speaker LLC Thermal Limit of 0 Watts; F3 at Hz. Best used above 0 Hz. For use as a midrange driver. Box Properties Name: Type: Closed Box Shape: Prism, square --Box Parameters-- Vb = 0.1 cu.ft V(total) = 0.7 cu.ft Qtc = 0.58 QL = F3 =. Hz Fill = normal Normalized Amplitude Response (-SPL/Hz) Driver Properties Name: PRO-5W-8 Type: Standard one-way driver Company: Eminence Speaker USA Comment: 5" Cast Frame Mid/Bass --Configuration-- No. of Drivers = 1 --Mechanical Parameters-- Fs = 9.3 Hz Qms = 3.35 Vas =.31 liters Cms = 0.7 mm/n Mms =.05 g Rms = 0.7 kg/s Xmax =.95 mm Xmech = mm P-Dia = 91.5 mm Sd =. sq.cm P-Vd = liters --Electrical Parameters-- Qes = 0.35 Re = 5.3 ohms Le = 0.8 mh Z = 8 ohms BL =.11 Tm Pe = 75 watts --Electromech. Parameters-- Qts = no = 1.00 % 1-W SPL = V SPL = Hz K 5 K K K Custom Amplitude Response (-SPL/Hz at 1 m) with 0 watts Hz K 5 K K K Maximum Acoustic Power (-SPL/Hz at 1 m) Hz K 5 K K K File: PRO-5W-8LargeSealedMidrange0Watts.bb

18 Page Two -- PRO-5W-8LargeSealedMidrange0Watts.bb Maximum Electric Input Power (W/Hz) watts Hz K 5 K K K Cone Displacement (mm/hz) with 0 watts mm Hz K 5 K K K System Impedance (ohms/hz) ohms Hz K 5 K K K

19 PRO-5W-8 "Large" Vented Midbass By Jerry McNutt, Eminence Speaker LLC Limit to 0 Watts; F3 at 113 Hz. Best used above 15 Hz. For satellites or midbass designs. Box Properties Name: Type: Vented Box Shape: Prism, square --Box Parameters-- Vb = 0.1 cu.ft V(total) = 0.15 cu.ft Fb = 1 Hz QL = 7 F3 = 113 Hz Fill = normal --Vents-- No. of Vents = 1 Vent shape = round Vent ends = one flush Dv = in Lv =. in Driver Properties Name: PRO-5W-8 Type: Standard one-way driver Company: Eminence Speaker USA Comment: 5" Cast Frame Mid/Bass --Configuration-- No. of Drivers = 1 --Mechanical Parameters-- Fs = 9.3 Hz Qms = 3.35 Vas =.31 liters Cms = 0.7 mm/n Mms =.05 g Rms = 0.7 kg/s Xmax =.95 mm Xmech = mm P-Dia = 91.5 mm Sd =. sq.cm P-Vd = liters --Electrical Parameters-- Qes = 0.35 Re = 5.3 ohms Le = 0.8 mh Z = 8 ohms BL =.11 Tm Pe = 75 watts --Electromech. Parameters-- Qts = no = 1.00 % 1-W SPL = V SPL = 93.8 Normalized Amplitude Response (-SPL/Hz) Hz K 5 K K K Custom Amplitude Response (-SPL/Hz at 1 m) with 0 watts Hz K 5 K K K Maximum Acoustic Power (-SPL/Hz at 1 m) Hz K 5 K K K File: PRO-5W-8LargeVentedMiass0Watts.bb

20 Page Two -- PRO-5W-8LargeVentedMiass0Watts.bb Maximum Electric Input Power (W/Hz) watts Hz K 5 K K K Cone Displacement (mm/hz) with 0 watts mm Hz K 5 K K K Vent Air Velocity ( m/sec/hz) with 0 watts m/s Hz K 5 K K K

21 Page Three -- PRO-5W-8LargeVentedMiass0Watts.bb System Impedance (ohms/hz) ohms Hz K 5 K K K