Professional Engineer, South Carolina, No (1987-present)

Transcription

1 RESUME Charng Hsein JUANG PERSONAL DATA Professor, Glenn Civil Engineering Department 214 Lowry Hall, Clemson University, Clemson, SC Phone Fax EDUCATION Ph.D., Purdue University, 1981, Civil Engineering M.S. National Cheng Kung University, 1976, Civil Engineering B.S. National Cheng Kung University, 1974, Civil Engineering PROFESSIONAL REGISTRATION Professional Engineer, South Carolina, No (1987-present) PROFESSIONAL EXPERIENCE Clemson University, Glenn Professor of Civil Engineering, 2012-present China University of Geosciences (Wuhan), Overseas Chair Professor, Wuhan University, Chu-Tian Chair Professor, China, Tongji University, Chair Professor of the Innovation Center for Disaster Prevention, College of Civil Engineering, Tongji University, Kwang Hua Visiting Professor, June 2011 National Central University, Chair Professor of Civil Engineering, National Taiwan University of Science and Technology, Honorary Chair Professor of Civil Engineering, July December 2009 National Cheng Kung University, , Visiting Research Professor Clemson University, , Professor Clemson University, , Associate Professor U.S.A.E. Waterways Experiment Station, May - August 1985, Civil Engineer Clemson University, , Assistant Professor Purdue University, , Postdoctoral Fellow (with late Professor G.A. Leonards) MEMBERSHIP American Society of Civil Engineers (ASCE) - Fellow Geo Institute (GI) - member Association of Drilled Shaft Contractors (ADSC) Member International Society for Soil Mech. and Geotech. Engineering (ISSMGE) Member ASCE-GI Technical Committee on Risk Assessment and Management Past chair 1

2 PUBLICATIONS Edited Journal Issues and ASCE Geotechnical Special Publication Book Chapter Reconnaissance of the Chi-Chi Earthquakes, Taiwan, Engineering Geology, Vol. 71, Nos. 1-2, C. H. Juang, editor. Soil liquefaction: Evaluation, implementation, and in situ tests, Soil Dynamics and Earthquake Engineering, Vol. 24, Nos. 9-10, 2004, C. H. Juang, editor. Reconnaissance of Extreme Natural Disasters of Morakot Typhoon, Taiwan, Engineering Geology, Vol. 123, Nos. 1 2, 2011, C. H. Juang, editor. GeoRisk2011 Geotechnical Risk Assessment and Management, Geotechnical Special Publications (GSP) 224, ASCE, CD-ROM, 1250 pp., ISBN C. H. Juang, K.K. Phoon, A.J. Puppala, R.A. Green, and G.A. Fenton, editors. Juang, C.H., Fang, S.F, and Li, D.K, Reliability analysis of liquefaction potential of soils using standard penetration test, Chapter 13, in Reliability-Based Design in Geotechnical Engineering Computations and Applications, KK Phoon editor, Taylor & Francis, London and New York, Juang, C.H., Khoshnevisan, S., and Zhang, J., Maximum likelihood principle and its application in soil liquefaction assessment, Chapter 4, in Risk and Reliability in Geotechnical Engineering, K.K. Phoon and J. Ching, editors, CRC Press, Refereed Articles Juang, C.H., "A Study of Factors Controlling Slope Stability in the Mudstone Area," Journal of Chinese Institute of Civil and Hydraulic Engineering, No. 3, Vol. 3, pp , Leonards, G.A., and Juang, C.H., Discussion of "Field Tests of Long-Span Aluminum Culvert," Journal of Geotechnical Engineering, ASCE, 110 (1), 1984, pp Leonards, G.A., Juang, C.H., Wu, T.H., and Stetkar, R.E., "Predicting Performance of Buried Metal Conduits," Transportation Research Record, Vol. 1008, pp , Leonards, G.A. and Juang, C.H., "Predicting Performance of Buried Metal Pipe Arches," Transportation Research Record, Vol. 1008, pp , Juang, C.H. and Chao, L.P., "Evaluation of Design Specifications for Buried Steel Pipes Subjected to Overburden Loads," International Journal of Pipelines, 5(1986), pp. 2

3 Juang, C.H. and Holtz, R.D., "A Probabilistic Permeability Model and the Pore Size Density Function," International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 10, 1986, pp Juang, C.H. and Holtz, R.D., "A Note on Preparation of Specimens of Noncohesive Material for Mercury Intrusion Porosimetry," Geotechnical Testing Journal, ASTM, Vol. 9, No.3, 1986, pp Juang, C.H. and Holtz, R.D., "Fabric, Pore Size, and Permeability of Sandy Soils," Journal of Geotechnical Engineering, ASCE, Vol. 112, No. 9, 1986, pp Juang, C.H. and Elton, D.J., "Fuzzy Logic for Estimation of Earthquake Intensity Based on Building Damage Records," Civil Engineering and Environmental Systems (formerly, Journal of Civil Engineering Systems), Vol. 3, 1986, pp Juang, C.H. and Lovell, C.W., "Measurement of Pore Size Density Function in Sand," Transportation Research Record, Vol. 1089, 1987, pp Juang, C.H., Burati, J.L., and Kalidindi, S.N., "A Fuzzy System for Bid Proposal Evaluation Using Microcomputers," Journal of Civil Engineering Systems, Vol. 4, No. 3, 1987, pp Lee, D.H. and C.H. Juang, "Use of Permeability as An Index to Characterize Internal Structural Changes and Fracture Mechanism of a Soft Rock Under Triaxial Loadings," Geotechnical Testing Journal, ASTM, Vol. 11, No. 1, 1988, pp Juang, C.H., "Development of a Decision Support System Using Fuzzy Sets," Journal of Microcomputers in Civil Engineering, Vol. 3, No. 2, 1988, pp Elton, D.J. and Juang, C.H., "Asphalt Pavement Evaluation Using Fuzzy Sets," Transportation Research Record, No. 1196, 1989, pp Juang, C.H. and Lee, D.H., "Development of an Expert System for Rock Mass Classification," Journal of Civil Engineering Systems, Vol. 6, pp , Tien, Y.M., Lee, D.H. and Juang, C.H., "Strain, Pore Pressure and Fatigue Characteristics of Sandstone Under Various Load Conditions," Journal of Rock Mech. and Mining Science & Geomechanics Abstract, Vol. 27, No. 4, pp , Juang, C.H. and Ulshafer, M.L., "Development of An Expert System for Preliminary Selection of Pile Foundation," Transportation Research Record, No. 1277, pp

4 Juang, C.H., "A Performance Index For the Unified Rock Classification System," The Bulletin of the Association of Engineering Geologists, Vol. XXVII, No. 4, pp , Juang, C.H., Huang, X.H. and Elton, D.J., "Fuzzy Information Processing by the Monte Carlo Simulation Technique," Journal of Civil Engineering Systems, Vol. 8, pp , Lee, D.H. and Juang, C.H., "A New Technique for Measuring the Roughness Profile of Rock Joints," Geotechnical Testing Journal, ASTM, Vol. 14, No. 3, pp , Juang, C.H. Wey, J.L., and Elton, D.J., "Model for Capacity of Single Piles in Sand Using Fuzzy Sets," Journal of Geotechnical Engineering, ASCE, Vol. 117, No. 12, pp , Juang, C.H., Lee, D.H., Sheu, C., "Mapping Slope Failure Potential Using Fuzzy Sets," Journal of Geotechnical Engineering, ASCE, Vol. 118, No. 3, pp , Juang, C.H., Huang, X.H., and Elton, D.J., "Modeling and Analysis of Non-Random Uncertainties - A Fuzzy Set Approach," Journal for Numerical and Analytical Methods in Geomechanics, Vol. 16, pp , Lee, D.H. and Juang, C.H., "Evaluation of Failure Potential of Slopes in Mudstone- Dominant Sloping Lands Using Fuzzy Sets," ASCE Geotechnical Special Publication No. 31, Stability and Performance of Slopes and Embankment, pp , Juang, C.H. and Amirkhanian, S.N., "A Unified Pavement Distress Index for Managing Flexible Pavements," Journal of Transportation Engineering, ASCE, Vol. 118, pp , Juang, C.H., Huang, X.H. and Schiff, S.D., "Determination of Weights of Criteria for Decision Making by the Fuzzy Eigenvector Method," Journal of Civil Engineering Systems, Vol. 9, pp. 1-16, Juang, C.H. and Huang, X.H., "Aggregating Expert Opinions by Fuzzy Entropy Method," Journal of Civil Engineering Systems, Vol. 9, pp , Aziz, N., Santanu, S., and Juang, C.H., "Polynomial Approximation of Equipotential Lines for Flow under a Dam," Computers and Geomechanics, Vol. 13, pp , Juang, C.H., Huang, X.H., and Holtz, R.D., "Determination of Fuzzy Relationship by Fuzzy Regression," Journal of Civil Engineering Systems, Vol. 9, pp , Juang, C.H., Lee, D.H., and Chang, C.I., "A New Model of Shear strength of Rock 4

5 Joints," ASTM Geotechnical Testing Journal, Vol. 16, No. 1, pp , Juang, C.H., Clark, J.E., and Gohsh, P., "Representation, Processing, and Interpretation of Fuzzy Information in Civil Engineering," Transportation Research Record 1139, pp.20-27, Elton, D.J., Juang, C.H., and Russell, J.S., "Contractor Prequalification Using Fuzzy Sets," Journal of Civil Engineering Systems, Vol. 11, pp. 1-17, Juang, C.H., Lee, K., and Chen, J.W., "A New Approach for Siting Landfills Using Fuzzy Sets," Journal of Civil Engineering Systems, Vol. 12, pp , Juang, C.H., Wu, S., and Sheu, H.J., "A Group Decision Making Model for Siting LULUs," The Environmental Professional, (new title: Environmental Practice), Vol. 17, pp , Desai, V.R., Aziz, N.M., and Juang, C.H., "Uncertainty and Sensitivity Analysis in a Low-Head Hydro System," Journal of Civil Engineering Systems, Vol. 12, No. 3, pp , Ni, S.H., Lu, P.C., and Juang, C.H., "A Fuzzy Neural Network Approach to Evaluation of Slope Failure Potential," Journal of Microcomputers in Civil Engineering, Vol. 11, pp , Madhu, S., Juang, C.H., Chen, J.W., and Lee, D.H., "A Fuzzy System for Rock Mass Classification and Tunnel Support Selection," Journal of Civil Engineering Systems, Vol. 12, No. 4, pp , Elton, D. J., Juang, C. H., and Sukumaran, B., "Liquefaction Susceptibility Evaluation Using Fuzzy Sets," Soils and Foundations, Japanese Society of Soil Mechanics and Foundation Engineering, Vol. 35, No. 2, pp , Juang, C.H., Huang, X.H., Holtz, R.D. and Chen, J.W., "Determining Relative Density of Sands from CPT Using Fuzzy Sets," Journal of Geotechnical Engineering, ASCE, Vol. 122, No. 1, pp.1-6, January, Chang, H.W., Tien, T.M., and Juang, C.H., "Formation of South-facing Bald Mudstone Slopes in Southwestern Taiwan," Engineering Geology, Vol. 42, No. 1, pp , April, Lee, D.H., Tien, K.G., and Juang, C.H., "Full-scale Field Experimentation of a New Technique for Protecting Mudstone Slopes," Engineering Geology, Vol. 42, No. 1, pp , Chen, J.W. and Juang, C.H., "Determining Drained Friction Angle of Sands from CPT", 5

6 ASCE Journal of Geotechnical Engineering, Vol. 122, No. 5, pp , Lee, D.H., Juang, C.H. and Lei, I.M., "High-Temperature Brazilian Test for Tensile Strength of Metamorphic Limestone," ASTM Geotechnical Testing Journal, Vol. 19, No.2, pp , Juang, C.H. and Elton, D.J., A Practical Approach to Uncertainty Modeling in Geotechnical Engineering, ASCE Geotechnical Special Publication No. 58, Uncertainty in the Geologic Environment: from Theory to Practice, Vol. 2, pp , Huang, X.H. and Juang, C.H., "Interpretation of CPT for Strength of Sand Considering Uncertainty," Transportation Research Record, No. 1526, pp , Ni, S.H., Juang, C. H. and Lu, P.C., "Estimation of Dynamic Properties of Sands Using Artificial Neural Networks," Transportation Research Record, No. 1526, pp. 1-5, Lin, P.S., Wu, X.H., and Juang, C.H., "Equivalent Wheel Load Factor for Rigid Pavements," Journal of Transportation Engineering, ASCE, Vol. 122, No. 6, pp , Juang, C. H., Elton, D.J., and Lin, P.S., "Estimation of Vertical Capacity of Singles Piles Considering Uncertainties," Transportation Research Record, No. 1582, pp , Juang, C.H. and Elton, D.J., "Predicting Collapse Potential of Soils with Neural Networks," Transportation Research Record, No. 1582, pp , Lin, P.S., Wu, Y.T., Juang, C.H., and Huang, T.K., "Determination of Elastic Moduli of Jointed Concrete Pavements Using Road Rater Data," Journal of Transportation Engineering, ASCE, Vol. 124, No. 4, pp , March Juang, C.H., Jhi, Y.Y., and Lee, D.H., Stability Analysis of Existing Slopes Considering Uncertainty, Engineering Geology, Vol. 49, pp , Lin, P.S., Yang, L.W., and Juang, C.H., "Subgrade Reaction and Load-Settlement Characteristics of Gravelly Cobble Deposits by Plate Load Test," Canadian Geotechnical Journal, Vol. 35, pp , Juang, C.H. and Chen, C. J., CPT-Based Liquefaction Evaluation Using Artificial Neural Networks, Journal of Computer-Aided Civil and Infrastructure Engineering, Vol. 14, pp , Juang, C.H., Ni, S.H., and Lu, P.C., Training Artificial Neural Networks with the Aid of Fuzzy Sets, Journal of Computer-Aided Civil and Infrastructure Engineering, Vol. 14, No. 6, pp ,

7 Juang, C.H., Rosowsky, D.V., and Tang, W.H., "Reliability-based method for assessing liquefaction potential of sandy soils," ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 125, No. 8, pp , Juang, C.H., Chen, C.J., and Tien, Y.M., Appraising CPT-Based Liquefaction Resistance Evaluation Methods Artificial Neural Network Approach, Canadian Geotechnical Journal, Vol. 36, No. 3, pp , Lee, D.H., Juang, C.H., Chen, J.W., Lin, H.M., and Shieh, W.H., "Stress paths and mechanical behaviors of a sandstone in hollow cylinder test," Int. Journal of Rock Mechanics and Mining Sciences, Vol. 36, pp , Lin, P.S., Chang, C.W. and Juang, C.H., "Probabilistic sensitivity analysis for onedimensional solute transport," Journal of Civil Engineering and Environmental Systems, Vol. 17, No. 1, pp , Gordon & Breach Science Publ. Inc., Juang, C.H. and Chen, C.J., "A rational method for development of limit state for liquefaction evaluation based on shear wave velocity data," Int. Journal for Numerical and Analytical Methods in Geomechanics, Vol. 24, pp. 1-27, Lin, S.Y., Lin, P.S., Luo, H.S., and Juang, C.H. "Shear modulus and damping ratio characteristics of gravelly deposits," Canadian Geotechnical Journal, Vol. 37, pp , Elton, D.J., Juang, C.H., and Lin, P.S., "Vertical capacity of piles using fuzzy sets," Journal of Civil Engineering and Environmental Engineering, Vol. 17, No. 3, pp , Gordon & Breach Science Publ. Inc., Chen, C. J. and Juang, C.H., "Calibration of SPT- and CPT-based liquefaction evaluation methods," Innovations and Applications in Geotechnical Site Characterization, Geotechnical Special Publication No. 97, P.W. Mayne and R. Hryciw eds., ASCE, Reston, VA, pp , Chiru-Danzer, M., Juang, C.H., and Christopher, R., "Estimation of liquefactioninduced vertical displacements using multi-linear regression analysis," Soil Dynamics and Liquefaction, Geotechnical Special Publication No. 107, R.Y.S. Pak and J. Yamamura, eds., ASCE, Reston, VA, pp , Juang, C.H. and Jiang, T., "Assessing probabilistic methods for liquefaction potential evaluation," Soil Dynamics and Liquefaction, Geotechnical Special Publication No. 107, R.Y.S. Pak and J. Yamamura, eds., ASCE, Reston, VA, pp , Juang, C.H., Chen, C.J., Tang, W.H., and Rosowsky, D.V., "CPT-based liquefaction analysis, Part 1: Determination of limit state function," Geotechnique, Vol. 50, No. 5, pp ,

8 Juang, C.H., Chen, C.J., Rosowsky, D.V., and Tang, W.H., "CPT-based liquefaction analysis, Part 2: Reliability for design, Geotechnique, Vol. 50, No. 5, pp , Juang, C.H., Chen, C.J., Jiang, T., and Andrus, R.D., "Risk-based liquefaction potential evaluation using standard penetration tests," Canadian Geotechnical Journal, Vol. 37, No. 6, pp , Chiru-Danzer, M., Juang, C.H., Christopher, R., and Suber, J., "Estimation of liquefaction-induced horizontal displacements using artificial neural networks," Canadian Geotechnical Journal, Vol. 38, No. 1, pp , Juang, C.H., Chen, C.J., and Jiang, T., "A probabilistic framework for liquefaction potential by shear wave velocity," Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 127, No. 8, pp , Juang, C.H., Lu, P.C., and Chen, C.J., "Predicting geotechnical parameters of sands from CPT measurements using neural networks," Journal of Computer-Aided Civil and Infrastructure Engineering, Vol. 17, pp , Lee, D.H., Juang, C.H., and Ku, C.S., "Liquefaction performance of soils at the site of a partially completed ground improvement project during the 1999 Chi-Chi earthquake in Taiwan," Canadian Geotechnical Journal, Vol. 38, No. 6, pp , Juang, C.H., Jiang, T., and R. Christopher, "Three-dimensional site characterization neural network approach," Geotechnique, Vol. 51, No. 9, pp , Lin, S.S., Liao, J.C., Yang, T.S., and Juang, C.H., Nonlinear response of single concrete piles, Geotechnical Engineering, Journal of the Southeast Asian Geotechnical Society, pp , December Juang, C.H., Yuan, H., Lee, D.H., and Ku, C.S., Assessing CPT-based methods for liquefaction evaluation with emphasis on the cases from the Chi-Chi, Taiwan, earthquake, Soil Dynamics and Earthquake Engineering, Vol. 22, No. 3, 2002, pp Juang, C.H., Jiang, T., and Andrus, R.D., Assessing probability-based methods for liquefaction evaluation, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 128, No. 7, July 2002, pp Lee, D.H., Juang, C.H., Lin, H.M., and Yeh, S.H., Mechanical behavior of Tien-Liao mudstone in hollow cylinder tests, Canadian Geotechnical Journal, Vol. 39, No. 3, June 2002, pp Lee, D.H., Juang, C.H., and Lin, H.M., Yield surface of Mu-San sandstone by hollow cylinder tests, Rock Mechanics and Rock Engineering, Vol. 35, No. 3, 2002, pp

9 216. Lin, S.S., Liao, J.C., Liang, T.T., and Juang, C.H., Use of Bouc-Wen model for seismic analysis of concrete piles, Geotechnical Special Publication No. 116, M.W. O Neill and F.C. Townsend, eds., ASCE, 2002, pp Yang, C.C., Lin, S.S., Juang, C.H., and Lee, W.F., Analysis of laterally loaded piles in a two-layer elastic medium, Geotechnical Special Publication No. 116, M.W. O Neill and F.C. Townsend, eds., ASCE, 2002, pp Lin, S.S., Yeh, S.C., Juang, C.H., and Chang, Y.H., Statnamic tests for six long rocksocketed shafts, Geotechnical Special Publication No. 113, T.L. Brandon, ed., ASCE, 2002, pp Juang, C.H., Yuan, H., Lee, D.H., and Lin, P.S. "Simplified cone penetration test-based method for evaluating liquefaction resistance of soils," Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 129, No. 1, 2003, pp Juang, C.H. and Jiang, T., A New Approach to Site Characterization Using Generalized Regression Neural Network, Geotechnical Special Publication No. 121, ASCE, 2003, pp Yuan, H., Yang, H., Andrus, R.D., and Juang, C.H., Liquefaction-induced ground failure: A study of the Chi-Chi Earthquake cases, Engineering Geology, Vol. 71, Nos. 1-2, 2004, pp Andrus, R.D., Stokoe, K. H., and Juang, C.H., Guide for Shear Wave-Based Liquefaction Potential Evaluation, Earthquake Spectra, Vol. 20, No. 2, 2004, pp Juang, C.H., Editorial - Soil Liquefaction: Evaluation, Instrumentation, and In Situ Tests Soil Dynamics and Earthquake Engineering, Vol. 24, Nos. 9-10, p. 633, Kramer, S.L., Juang, C. H., and Huang, A.B., U.S.-Taiwan Workshop on Soil Liquefaction: Overview and Research Needs, Soil Dynamics and Earthquake Engineering, Vol. 24, Nos. 9-10, 2004, pp Andrus, R.D., Piratheepan, P., Ellis, E., Zhang, J., and Juang, C.H., Comparing liquefaction evaluation methods using penetration-vs relationships, Soil Dynamics and Earthquake Engineering, Vol. 24, Nos. 9-10, 2004, pp Juang, C.H., Yang, S.H., Yuan, H. and Khor, E.H., Characterization of the uncertainty of the Robertson and Wride model for liquefaction potential, Soil Dynamics and Earthquake Engineering, Vol. 24, Nos. 9-10, 2004, pp

10 Juang, C.H., Fang, Y., and Li, K., Reliability Analysis of Soil Liquefaction Potential, Geotechnical Special Publication No. 133, ASCE, Reston, VA, January Hwang, J.H., Chen, C.H., and Juang, C.H., Liquefaction Hazard Analysis: A Fully Probabilistic Method, Geotechnical Special Publication No. 133, ASCE, Reston, VA, January Wu, J.H., Juang, C.H., and Lin, H.M., Vertex-to-Face Contact Searching Algorithm for Three-Dimensional Frictionless Contact Problems, International Journal for Numerical Methods in Engineering, Vol. 63, March 2005, pp Zhang, J., Andrus, R.D., and Juang, C. H., Estimating Normalized Shear Modulus and Material Damping Ratio, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 4, April 2005, pp Juang, C. H., Yuan, H., Li, D.K., Yang, S. H., Christopher, R. A., Estimating severity of liquefaction-induced damage near foundation, Soil Dynamics and Earthquake Engineering, Vol. 25, No. 5, July 2005, pp Juang, C. H., Yang, S. H., and Yuan, H., On the Model Uncertainty of Shear Wave Velocity-Based Methods for Liquefaction Potential Evaluation, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 10, Oct., 2005, pp Juang, C.H., Yang, S.H., and Yuan, H., Fang, S.Y., Liquefaction in the Chi-Chi earthquake: Effect of Capping Non-liquefiable layers, Soils and Foundations, Japanese Geotechnical Society, Vol. 45, No. 6, 2005, pp Juang, C.H., Fang, S.Y., and Khor, E.H. First Order Reliability Method for Probabilistic Liquefaction Triggering Analysis Using CPT, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 132, No. 3, March 2006, pp Li, D.K., Juang, C.H., and Andrus, R.D., Estimation of Liquefaction Effect by Means of Liquefaction Potential Index, Geotechnical Special Publication, No. 152, ASCE, Reston, VA, June 2006, pp Hsiao, C.L., Kung, T.C., Juang, C.H., and Schuster, M., Estimation of Wall Deflection in Deep Excavation Neural Network Approach, Geotechnical Special Publication, No. 155, ASCE, Reston, VA, June 2006, pp Kung, T.C., Juang, C.H., and Hsiao, C.L., Ground Settlement Caused by Excavation in Clay An Empirical Method, Geotechnical Special Publication, No. 155, ASCE, Reston, VA, June 2006, pp Fang, S.Y., Juang, C.H. and Tang, W.H., A Probabilistic Model for Liquefaction 10

11 Triggering Analysis Using SPT, Geotechnical Special Publication No. 153, ASCE, Reston, VA, June 2006, pp Li, D.K., Juang, C.H., and Andrus, R.D. Liquefaction Potential Index: A Critical Assessment, Journal of GeoEngineering, Taiwanese Geotechnical Society, Vol. 1, No. 1, August 2006, pp Tien, Y.M., Kuo, M.C., and Juang, C.H., An experimental investigation of the failure mechanism of simulated transversely isotropic rocks, International Journal of Rock Mechanics and Mining Sciences, Vol. 43, 2006, pp Li, D.K., Juang, C.H., Andrus, R.D., and Camp, W.M., Index Properties-Based Criteria for Liquefaction Susceptibility of Clayey Soils: A Critical Assessment, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 133, No. 1, January 2007, pp Chi, Y.Y., Lee, Y.F., Lee, D.H., Juang, C.H., and Wu, J.H., Simplified Models for Assessing Annual Liquefaction Probability A Case Study of the Yuanlin Area, Taiwan, Engineering Geology, Vol. 90, Nos. 1-2, 2007, pp Hsiao, C.L., Juang, C.H., Kung, T.C., and Schuster, M. J., "Reliability analysis and updating of excavation-induced ground settlement for building serviceability evaluation", Geotechnical Special Publication No. 170, ASCE, Reston, VA, Schuster, M.J., Juang, C.H., Roth, M.J.S., Hsiao, C.L., and Kung, T.C., "Serviceability limit state for probabilistic characterization of excavation-induced building damage," Geotechnical Special Publication No. 170, ASCE, Reston, VA, Kung, T.C., Juang, C.H., Hsiao, C.L., and Hashash, Y. A simplified models for wall deflection and ground surface settlement caused by braced excavation in clays, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 133, No. 6, 2007, pp Xiao F., Amirkhanian, S., and Juang, C.H., Rutting resistance of rubberized asphalt concrete pavements containing reclaimed asphalt pavement mixtures, Journal of Materials in Civil Engineering, ASCE, Vol. 19, No. 6, 2007, pp Juang, C.H. and Li, K, D., Assessment of liquefaction hazards in Charleston quadrangle, South Carolina, Engineering Geology, Vol. 92, 2007, pp Kung, T.C., Hsiao, C.L., and Juang, C.H., Evaluation of a simplified small-strain soil model for analysis of excavation-induced movements, Canadian Geotechnical Journal, Vol. 44, 2007, pp Kung, T.C., Hsiao, C.L., Schuster, M., and Juang, C.H., A neural network approach 11

12 to estimating excavation-induced wall deflection in soft clays, Computers and Geotechnics, Vol. 34, 2007, pp Zhang, J., Andrus, D.A., and Juang, C.H., Model uncertainty in normalized shear modulus and damping relationships, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 134, No. 1, 2008, pp Chen, C.H., Juang, C.H., and Schuster, M.J., Empirical model for liquefaction resistance of soils based on artificial neural network learning of case histories, Geotechnical Special Publication No. 179, ASCE, Reston, VA, 2008, pp Juang, C.H., Li, K., Fang, Y., Liu, Z., and Khor, E.H., Simplified Procedure for Developing Joint Distribution of a max and M w for Probabilistic Liquefaction Hazard Analysis, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 134, No. 8, 2008, pp Juang, C.H., Liu, C.N., Chen, C.H., Hwang, J.H., and Lu, C.C., Calibration of liquefaction potential index: A re-visit focusing on a new CPTU model, Engineering Geology, Vol. 102, No. 1-2, 2008, pp Hsiao, E.C.L., Schuster, M., Juang, C.H., and Kung, T.C., "Reliability Analysis of Excavation-Induced Ground Settlement for Building Serviceability evaluation," Journal of Geotechnical and Geoenvironmental Engineering, Vol. 134, No. 10, 2008 pp Schuster, M.J., Juang, C.H., Roth, Mary J.S., and Rosowsky, D.V., Reliability Analysis of Building Serviceability Problems Caused by Excavation, Geotechnique, Vol. 58, No. 9, 2008, pp Juang, C.H., Chen, C.H. and Mayne, P.W., CPTU simplified stress-based model for evaluating soil liquefaction potential, Soils and Foundations, Vol. 48, No. 6, 2008, pp Tsai, P.H., Lee, D.H., Kung, G.T.C., and Juang, C.H., Simplified DMT-based methods for evaluating liquefaction resistance of soils, Engineering Geology, Vol. 103, No. 1-2, 2009, pp Kung, G.T.C., Ou, C.Y., and Juang, C.H., "Modeling small-strain behavior of Taipei clays for finite element analysis of braced excavations," Computers and Geotechnics, Vol. 36, 2009, pp Juang, C.H., Fang, S.Y., Tang, W.H., Khor, E.H., Kung, G.T.C., and Zhang, J., Evaluating model uncertainty of an SPT-based simplified method for reliability analysis for probability of liquefaction, Soils and Foundations, Vol. 49, No. 1, 2009, pp

13 Schuster, M. and Juang, C.H. Reliability assessment of damage potential of buildings caused by excavation, Geotechnical Special Publication, ASCE, No. 186, 2009, pp Schuster, M., Juang C.H., and Lee, D.H., Updating of soil parameters for improving the accuracy of the excavation-induced building damage assessment, Geotechnical Special Publication, ASCE, No. 186, 2009, pp Juang, C.H., Lu, C.C. and Hwang, J.H., Assessing probability of surface manifestation of liquefaction in a given exposure time using CPTU, Engineering Geology, Vol. 104, 2009, pp Lin, H.M., Shun-Kung Chang, S.K., Wu, J.H., and Juang, C.H., Neural networkbased model for assessing failure potential of highway slopes in the Alishan, Taiwan area: pre- and post-earthquake investigation, Engineering Geology, Vol. 104, 2009, pp Xiao F., Amirkhanian, S., and Juang, C.H., Prediction of fatigue life of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement using artificial neural networks, Journal of Materials in Civil Engineering, ASCE, Vol. 21, No. 6, 2009, pp Lu, C.C., Hwang, J.H., Ku, C.S., Juang, C.H., and Luo, Z., Framework for Assessing Probability of Exceeding a Specified Liquefaction-Induced Settlement at a Given Site in a Given Exposure Time, Engineering Geology, Vol. 108, Nos. 1-2, September 2009, pp Peñalba, R.F., Luo, Z., and Juang, C.H., Framework for probabilistic assessment of landslide: a case study of El Berrinche, Environmental Earth Sciences, Volume 59, Number 3, December 2009, pp DOI: /s Schuster, M.J., Kung, G.T.C., Juang, C.H., and Hashash, Y.M.A., Simplified model for evaluating damage potential of buildings adjacent to a braced excavation, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 135, No. 12, December 2009, pp Wu, S.H., Ou, C.Y., Ching, J., and Juang, C.H., Reliability-based design for basal heave in an excavation considering spatial variability, Geotechnical Special Publication (GSP) No. 199, Advances in Analysis, Modeling, & Design (doi /41095(365)194). Ku, C.S., Juang, C.H., and Ou, C.Y., Reliability of CPT I c as an index for mechanical behaviour classification of soils, Geotechnique, Vol. 60, No. 11, 2010, pp Koduru, H.K., Xiao F., Amirkhanian S. N. and Juang, C.H., Development of a 13

14 methodology for the evaluation of flexible pavement distresses, Journal of Transportation Engineering (ASCE) Vol. 136, No.2, 2010, pp Juang, C.H., Ou, C.Y., Lu, C.C., and Luo, Z, Probabilistic framework for assessing liquefaction hazard at a given site in a specified exposure time using Standard Penetration Test, Canadian Geotechnical Journal, Vol. 47, No. 6, 2010, pp Lee, Y.F., Chi, Y.Y., Juang, C.H., and Lee, D.H., Annual Probability and Return Period of Soil Liquefaction in Yuanlin, Taiwan Attributed to Chelungpu Fault and Changhua Fault, Engineering Geology, Vol. 114, No. 3-4, 2010, pp Koduru, H.K., Xiao F., Amirkhanian S. N. and Juang C.H., "Development of a methodology for the evaluation of flexible pavement distresses" Journal of Transportation Engineering, ASCE, Vol. 136, No.2, 2010, pp Juang, C.H., Schuster, M.J., Ou, C.Y., and Phoon, K.K., Fully probabilistic framework for evaluating excavation-induced building damage potential, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 137, No. 2, 2011, pp Chang, S.K., Lee, D.H., Wu, J.H., and Juang, C.H., Rainfall-based criteria for assessing slump rate of mountainous highway slopes: A case study of slopes along Highway 18 in Alishan, Taiwan, Engineering Geology, Vol. 118, No. 3-4, 2011, pp Chi, Y.Y., Lee, Y.F., Juang, C.H., Wu, Y.L., and Wu, Y.P., Probability-based Risk Assessment of Landslide/Slope Failure, Geotechnical Special Publication, No. 224, GeoRisk 2011, ASCE, 2011, pp Ku, C.S., Juang, C.H., Ching, J., and Lee, D.H., Liquefaction probability by probabilistic version of Robertson and Wride model, Geotechnical Special Publication, No. 224, GeoRisk 2011, ASCE, 2011, pp Luo, Z., Juang, C.H., and Huang, F.K., Wall and ground responses in a braced excavation considering spatial variability, Geotechnical Special Publication, No. 224, GeoRisk 2011, ASCE, 2011, pp Juang, C.H., Phoon, K.K., Puppala, A.J., Green R.A., and Fenton, G.A., Preface - GeoRisk2011: Geotechnical Risk Assessment and Management. ASCE Geotechnical Special Publications (GSP) 224, CD-ROM, ISBN Juang, C.H., Preface - Reconnaissance of Extreme Natural Disasters of Morakot Typhoon, Taiwan. Engineering Geology, Vol. 123, Nos. 1 2, 2011, pp Luo, Z., Atamturktur, H.S., Juang, C.H., Huang, H., and Lin, P.S., Probability of serviceability failure in a braced excavation in a spatially random field: Fuzzy finite 14

15 element approach, Computers and Geotechnics, 38 (8), 2011, pp Ku, C.S. and Juang, C.H., Variation of CPTU parameters and liquefaction potential at a reclaimed land induced by dynamic compaction, Journal of GeoEngineering, Vol. 6, No. 2, August 2011, pp Hwang, J.-H., Chung, M.-C., Juang, D.-S., Lyu, Y.-D., and Juang, C.H., Practical optimization of group piles using discrete Lagrange multiplier method. Optimization and Engineering, Vol. 12 (1-2), pp Luo, Z., Atamturktur, H.S., Cai, Y. and Juang, C.H., Reliability analysis of basalheave in a braced excavation in a 2-D random field, Computers and Geotechnics, Vol. 39, 2012, pp Xiao F., Amirkhanian S.N., Putman B., and Juang, C.H., Feasibility of Superpave gyratory compaction of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement, Construction and Building Materials, 27 (1), pp , Luo, Z., Atamturktur, H.S., Juang, C.H., Effect of spatial variability on probabilitybased design of excavations against basal-heave, Geotechnical Special Publication (GSP) No. 225, ASCE, pp , Dang, H.P., Lin, H.D., and Juang, C.H., Evaluation of soil variability influence on deep excavation analysis - Simplified approach, Geotechnical Special Publication (GSP) No. 225, ASCE, 2012, pp Ku, C.S., Juang, C. H. Chang, C.W., and Ching, J., Probabilistic version of the Robertson and Wride method for liquefaction evaluation: Development and application, Canadian Geotechnical Journal, 49 (1), pp , Ku, C.S. and Juang, C.H., Liquefaction and cyclic softening potential of soils - A unified CPTu-based approach, Gèotechnique 62 (5), pp , Tien, Y.M., Juang, C.H., Chen, J.M., and Pai, C.H., Isointensity-isoexposure concept for seismic vulnerability analysis A case study of the 1999 Chi-Chi, Taiwan earthquake, Engineering Geology, 131, pp. 1-10, March Juang, C.H., Ching, J., Luo, Z., and Ku, C.S., New models for probability of liquefaction using standard penetration tests based on an updated database of case histories, Engineering Geology, 133, pp , April Luo, Z., Atamturktur, H.S., Cai, Y. and Juang, C.H., Simplified approach for reliability-based design against basal-heave failure in braced excavations considering spatial effect, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 138, No. 4, pp ,

16 Wu, S.H., Ou, C.Y., Ching, J., and Juang, C.H., Reliability-based design for basal heave stability of deep excavations in spatially varying soils, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 138, No. 5, , Wang, L., Ravichandran, N., and Juang, C.H., Bayesian updating of KJHH model for prediction of maximum ground settlement in braced excavations using centrifuge data, Computers and Geotechnics 44, pp. 1-8, June Lee, Y.F., Chi, Y.Y., Juang, C.H., and Lee, D.H., Reliability analysis of rock wedge stability A knowledge-based clustered partitioning approach, Journal of Geotechnical and Geoenvironmental Engineering, 138 (6), pp , Juang, C. H., Ching, J., Ku, C.S., and Hsieh, Y.H., Unified CPTu-based probabilistic model for assessing probability of liquefaction of sand and clay, Géotechnique, 62 (10), pp , July Luo Z. and Juang, C.H., Efficient reliability-based design of drilled shafts considering spatial variability, Journal of GeoEngineering, 7(2), pp , Xiao, F., Amirkhanian, S.N., Juang, C.H., Hu, S., Shen, J., Model developments of long-term aged asphalt binders, Construction and Building Materials 37, pp , Lee, Y.F., Chi, Y.Y., Juang, C.H., and Lee, D.H., Reply to comments by JP Wang and Duruo Huang on Annual probability and return period of soil liquefaction in Yuanlin, Taiwan attributed to Chelungpu Fault and Changhua Fault by Lee et al. (2010) Engineering Geology, , 2012, pp Juang, C.H., Wang, L., Atamturktur, S. and Luo, Z., Reliability-based robust and optimal design of shallow foundations in cohesionless soil in the face of uncertainty, Journal of GeoEngineering, Vol. 7, No. 3, 2012, pp Juang, C. H. and Wang, L., Reliability-based robust geotechnical design of spread foundations using multi-objective genetic algorithm, Computers and Geotechnics, Vol. 48, 2013, pp Luo, Z., Atamturktur, H.S., and Juang, C.H., Bootstrapping for characterizing the uncertainty of sample statistics for braced excavations, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 139, No. 1, 2013, pp Wang, L., Hwang, J.H., and Juang, C.H., and Sez Atamturktur, Reliability-based design of rock slopes A new perspective on design robustness, Engineering Geology, Vol. 154, 2013, pp Juang, C.H., Luo, Z., Atamturktur, H.S., and Huang, H., Bayesian Updating of Soil 16

17 Parameters for Braced Excavations Using Field Observations, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 139, No. 3, 2013, pp Wang, L., Hwang, J.H., Luo, Z., Juang, C.H., and Xiao, J., Probabilistic back analysis of slope failure - a case study in Taiwan, Computers and Geotechnics, Vo. 51, 2013, pp Cai, Y., Gu, C., Wang, J., Juang, C.H., and Xu, C., One-way cyclic triaxial behavior of saturated clays: Comparison between constant and variable confining pressure, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 139(5), Wang, L., Luo, Z. and Juang, C.H., Updating uncertain soil parameters by maximum likelihood method for predicting maximum ground and wall movements in braced excavations, Foundation Engineering in the Face of Uncertainty Honoring Fred H. Kulhawy, GSP 229, ASCE, edited by Withiam, J.L., Phoon, KK, Hussein, M.H., 2013, pp Juang, C.H., Liu, Z., and Atamturktur, H.S. Reliability-based robust geotechnical design of retaining walls, Sound Geotechnical Research to Practice Honoring Robert D. Holtz II, GSP 230, ASCE, edited by Stuedlein, A.W. and Christopher, B.R., Dalton, S., Atamturktur, S., Juang, C.H., Structural health monitoring for sustainable and resilient infrastructure management, BUILT- International Journal of Building, Urban, Interior and Landscape Technology, Vol. 2, 2013, pp Liu, Z., Juang, C.H., and Atamturktur, S., Confidence level-based robust design of cantilever retaining walls in sand, Computers and Geotechnics, Vol. 52, pp Zhang, J., Huang, H.W., Juang, C.H., and Li, D.Q., Extension of Hassan and Wolff method for system reliability analysis of soil slopes, Engineering Geology, 160, 81 88, Liu, Z., Atamturktur, S., Juang, C.H., Performance based robust design optimization of steel moment resisting frames, Journal of Constructional Steel Research, Volume 89, October 2013, pp Juang, C. H., Ching, J., and Luo, Z., Assessing SPT-Based probabilistic models for liquefaction potential evaluation: A ten-year update, Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, Vol. 7, No. 3, pp , Dalton S., Atamturktur S., Farajpour I. and Juang C.H., An Optimization Based Approach for Structural Design Considering Safety, Robustness, and Cost, Journal of Engineering Structures, 57, 2013, pp

18 Juang, C.H., Ching, J., Wang, L., Khoshnevisan, S., and Ku, C.S., Simplified procedure for estimation of liquefaction-induced settlement and site-specific probabilistic settlement curve using CPT, Canadian Geotechnical Journal, 2013, Vol. 50, pp Juang, C.H., Wang, L., Liu, Z., Ravichandran, N., Huang, H., and Zhang, J., Robust geotechnical design of drilled shafts in sand - A new design perspective, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 139, December 2013, pp Juang, C.H., Wang, L., Khoshnevisan, S., and Atamturktur, S., Robust Geotechnical Design Methodology and Applications, Journal of GeoEngineering, Vol. 8, No. 3, December 2013, pp Dang, H.P., Lin, H.D., and Juang, C.H., Analyses of braced excavation considering parameter uncertainties using a finite element code, Journal of the Chinese Institute of Engineers, Vol. 37, no. 2, pp , Wang, L. Luo, Z., Xiao, J., and Juang, C.H., Probabilistic inverse analysis of excavation-induced wall and ground responses for assessing damage potential of adjacent buildings, Geotechnical and Geological Engineering an international journal, 32(2), pp , Juang, C.H., Wang, L., Hsieh, H.S., and Atamturktur, S., Robust geotechnical design of braced excavations in clays, Structural Safety, Vol. 49, 2014, pp Huang, H.W, Gong, W.P., Juang, C.H., Zhang, J., Robust design of gravity retaining walls, Journal of Tongji University (Natural Science), Vol. 42, No. 3, March 2014, pp (in Chinese). Gong, W., Luo, Z., Juang, C.H., Huang, H., Zhang, J., and Wang, L. Optimization of site exploration program for improved prediction of tunneling-induced ground settlement in clays, Computers and Geotechnics, Vol. 56, March 2014, pp Gong, W., Wang, L., Juang, C.H., Zhang, J., and Huang, H., Robust geotechnical design of shield-driven tunnels, Computers and Geotechnics, Vol. 56, March 2014, pp Wang, L., Juang, C.H., Atamturktur, S., Gong, W., Khoshnevisan, K. and Hsieh, H.S., Optimization of design of supported excavations in multi-layer strata, Journal of GeoEngineering, Vol. 9, No. 1, April 2014, pp Xiao, J., Juang, C.H., Wei, K., and Xu, S., Effects of principal stress rotation on the cumulative deformation of normally consolidated soft clay under subway traffic loading, Journal of Geotechnical and Geoenvironmental Engineering, 140(4), 2014, 18

19 paper Wang, L., Luo, Z., Gong, W., Khoshnevisan, S., and Juang, C.H. Moment methods for assessing probability of serviceability failure in braced excavations. GeoCongress 2014: Geo-Characterization and Modeling for Sustainability, Geotechnical Special Publication (GSP) 234, edited by Abu-Farsakh, M., Yu, X. and Hoyos, L.R., 2014, pp Wang, L., Luo, Z., Khoshnevisan, S., and Juang, C.H. Robust design of braced excavations using multi-objective optimization Focusing on prevention of damage to adjacent buildings. GeoCongress 2014: Geo-Characterization and Modeling for Sustainability, Geotechnical Special Publication (GSP) 234, ASCE, edited by Abu- Farsakh, M., Yu, X. and Hoyos, L.R., 2014, pp Luo, Z., Wang, L., Khoshnevisan, S., and Juang, C.H. Effect of spatial variability on reliability-based design of drilled shafts, GeoCongress 2014: Geo-Characterization and Modeling for Sustainability, Geotechnical Special Publication (GSP) 234, ASCE, edited by Abu-Farsakh, M., Yu, X. and Hoyos, L.R., 2014, pp Gong, W., Luo, Z., Wang, L., Huang, H., and Juang, C.H. Optimization of the level of site exploration effort for improving accuracy of tunneling-induced ground settlement prediction. GeoCongress 2014: Geo-Characterization and Modeling for Sustainability, Geotechnical Special Publication (GSP) 234, ASCE, edited by Abu- Farsakh, M., Yu, X. and Hoyos, L.R., 2014, pp Huang, H., Gong, W., Juang, C.H., Khoshnevisan, S., Robust geotechnical design of shield-driven tunnels using fuzzy sets, GeoShanghai 2014: Tunneling and Underground Construction, Geotechnical Special Publication (GSP) 242, ASCE, 2014, pp Xiao, J., Juang, C. H., Xu, C., Li, X., and Wang, L. (2014). Strength and deformation characteristics of compacted silt from the lower reaches of Yellow River of China under monotonic and repeated loading. Engineering Geology, 178, Xu, C., Wang, L. Tien, Y.M., Chen, J.M., Juang, C.H., Robust design of rock slopes with multiple failure modes - Modeling uncertainty of estimated parameter statistics with fuzzy number, Environmental Earth Sciences, Springer, October 2014, Volume 72, Issue 8, pp DOI /s Gong, W., Khoshnevisan, S., Juang, C.H., Gradient-based design robustness measure for robust geotechnical design, Canadian Geotechnical Journal, 2014, 51(11): , /cgj Liu, Z., Atamturktur, S., and Juang, C.H., Reliability based Multi-objective Robust Design Optimization of Steel Moment Resisting Frame Considering Spatial Variability 19

20 of Connection Parameters, Engineering Structures, Vol. 76, October 2014, pp DOI: /j.engstruct Atamturktur, S., Liu, Z., Cogan, S. and Juang, C.H., Calibration of imprecise and inaccurate numerical models considering fidelity and robustness: A multi-objective optimization based approach, Structural and Multidisciplinary Optimization, Springer, Published online August 2014, DOI /s y. Gong, W., Wang, L., Khoshnevisan, S., Juang, C.H., Huang, H., and Zhang, J. Robust geotechnical design of earth slopes, Journal of Geotechnical and Geoenvironmental Engineering, Volume 141, Issue 1 (January 2015), DOI /(ASCE)GT , Khoshnevisan, S., Gong, W., Juang, C.H., and Atamturktur, S., Efficient robust geotechnical design of drilled shafts in clay using a spreadsheet, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 141, No. 2, February 2015, DOI /(ASCE)GT , Zhang, J., Huang, H.W., Juang, C.H., and Su, W.W., Geotechnical reliability analysis with limited data: Consideration of model selection uncertainty, Engineering Geology, Vol. 181, October 2014, pp Khoshnevisan, S., Juang, C.H., Wang, L., and Gong, W., Robust design of geotechnical systems An update, Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards Vol. 8, No. 4, 2014, pages DOI/ / Gong, W., Juang, C.H., Huang, H., Zhang, J., and Luo, Z., Improved analytical model for circumferential behavior of jointed shield tunnels considering the longitudinal differential settlement, Tunnelling and Underground Space Technology, Volume 45, January 2015, Pages , DOI /j.tust Huang, H., Gong, W., Khoshnevisan, S., Juang, C.H., Zhang, D., and Wang, L., Simplified procedure for finite element analysis of the longitudinal performance of shield tunnels considering spatial soil variability in longitudinal direction, Computers and Geotechnics, Vol. 64, March 2015, pp doi: /j.compgeo Gong, W., Khoshnevisan, S., Huang, H., Juang, C.H., and Zhang, J., R-LRFD: Robust load and resistance factor design, Geotechnical Special Publication (GSP) No. 256, ASCE, Proceedings of IFCEE 2015, pp Khoshnevisan, S., Wang, L., Gong, W., and Juang, C.H., Robust design optimization applied to braced excavations, Geotechnical Special Publication (GSP) No. 256, ASCE, Proceedings of IFCEE 2015, pp

21 Khoshnevisan, S., Juang, C.H., Zhou, Y.G., Ku, C.S., Wang, L., and Ding, H.J., Assessing liquefaction-induced lateral spreads using CPT cases from the Christchurch, New Zealand earthquakes, Geotechnical Special Publication No. 256, ASCE, Proceedings of IFCEE 2015, pp Wang, L., Gong, W., Luo, Z., Khoshnevisan, S., and Juang, C.H., Reliability-based robust geotechnical design of rock bolts for slope stabilization, Geotechnical Special Publication No. 256, ASCE, Proceedings of IFCEE 2015, pp Gong, W., Huang, H., Juang, C.H., Atamturktur, S., Brownlow, A., Improved shield tunnel design methodology incorporating design robustness, Canadian Geotechnical Journal, Published on the web 26 February 2015, /cgj Cai, Y., Sun, Q., Guo, L., Juang, C.H., and Wang J., Permanent deformation characteristics of saturated sand under cyclic loading, Canadian Geotechnical Journal, 14 February 2015, /cgj Zhang, D.M., Ma, L.X., Zhang, J., Hicher, P.Y., Juang, C.H., Ground and tunnel responses induced by partial leakage in saturated clay with anisotropic permeability, Engineering Geology, Volume 189, 30 April 2015, Pages doi: /j.enggeo Luo, Z., Wang, L., Gong, W., and Juang, C.H., Probabilistic Approaches for Ultimate Resistance of Drilled Shafts in Sands Considering Spatial Variability, Geotechnical Engineering Journal of the SEAGS & AGSSEA,Vol. 46 No.2 June 2015 ISSN , pp Khoshnevisan, S., Juang, C.H., Zhou, Y.G., and Gong, W., Probabilistic assessment of liquefaction-induced lateral spreads using CPT - Focusing on the Christchurch events, Engineering Geology Volume 192, 18 June 2015, Pages doi: /j.enggeo Li, J.P., Zhang, J., Liu, S.N., and Juang, C.H., Reliability-based code revision for design of pile foundations: Practice in Shanghai, China, Soils and Foundations, 2015, Volume 55, Issue 3, June 2015, Pages Ching, J., Wang, J.S., Juang, C.H., Ku, C.S., Cone penetration test (CPT)-based stratigraphic profiling using the wavelet transform modulus maxima method, Canadian Geotechnical Journal, 2015, 52, Chen, Q., Wang, C. and Juang, C.H., CPT-based evaluation of liquefaction potential accounting for soil spatial variability at multiple scales, Journal of Geotechnical and Geoenvironmental Engineering, 2015, /(ASCE)GT ,

22 Gong, W., Juang, C.H., and Martin II, J.R. (2015). "Numerical integration method for computing reliability index of geotechnical system." Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, Gong, W., Juang, C.H., Khoshnevisan, S., Phoon, K.K. (2016). "R-LRFD: load and resistance factor design considering design robustness," Computers and Geotechnics, Vol. 74, April 2016, Sert, S., Luo, Z., Xiao, J., Gong, W. and Juang, C.H. (2016), Probabilistic analysis of responses of cantilever wall-supported excavations in sands considering vertical spatial variability. Computers and Geotechnics Vol. 75 (2016) Khoshnevisan, S., Wang, L., and Juang, C.H. (2016), Simplified procedure for reliability-based robust geotechnical design of drilled shafts in clay using spreadsheet, Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, (in press). Gong, W., Huang, H., Juang, C.H., and Wang, L. (2016). Simplified Procedure for Robust Geotechnical Design of Shoring System for Deep Excavation, Marine Georesources & Geotechnology (in press). Gong, W., Tien, Y.M., Juang, C.H, Martin, II, J.R., and Zhang, J. (2016) Calibration of empirical models considering model fidelity and model robustness Focusing on predictions of liquefaction-induced settlements, Engineering Geology (in press). Zhang, J., Juang, C.H., Martin, J.R., and Huang, H.W. (2016), Inter-region variability of Robertson and Wride method for liquefaction hazard analysis, Engineering Geology (in press). Gong, W., Juang, C.H., Martin II, J.R., Ching, J. (2016). "New sampling method and procedures for computing failure probability," Journal of Engineering Mechanics (in press). HONORS AND AWARDS GEOSNet Award 2015, Geotechnical Safety Network, Recognises an individual who has made impactful contributions to geotechnical reliability, particularly theoretical innovations that led to improvements in geotechnical engineering practice or theoretical advances. Awarded October 2015, Rotterdam, Netherlands. Best Paper Award, Robust geotechnical design of shield-driven tunnels using fuzzy sets, Geotechnical Special Publication (GSP) 242, ASCE, GeoShanghai International Conference, May 2014, Shanghai, China. 22