Hydrocarbon prospectivity of the Basement of Mumbai High Field

Size: px

Start display at page:

Download "Hydrocarbon prospectivity of the Basement of Mumbai High Field"

Sandra Carter
5 years ago
Views:

P-374 Summary Hydrocarbon prospectivity of the Basement of Mumbai High Field P.Satyanaryana*, MH Asset, ONGC, Mumbai, P.K.Sinha, KDMIPE, ONGC, Dehradun, D.K.Gupta, E&D. Dte., ONGC, Dehradun, A.V.

1 P-374 Summary Hydrocarbon prospectivity of the Basement of Mumbai High Field P.Satyanaryana*, MH Asset, ONGC, Mumbai, P.K.Sinha, KDMIPE, ONGC, Dehradun, D.K.Gupta, E&D. Dte., ONGC, Dehradun, A.V.Sathe, IEOT, ONGC, Navi Mumbai, G.C.Katuyar, IRS, ONGC, Ahmedabad Mumbai field located in the western offshore of India established the hydrocarbon accumulations in the Basement rocks through drilling exploratory wells. The field is giant paleohigh of the Precambrian granitic rocks overlain by Deccan Traps at some parts and clastics and carbonates over the greater part of the area. Basement is unique and unconvential in the context of reservoir nature and hence complex to characterize and isolate the areas of interest. It is known hydrocarbon accumulations are seen in the fault zones and its associated interconnected net work of fractures by which basically the porosity and permeability are generated. Well data analysis suggests that wells drilled away from fault zones are devoid of hydrocarbons whereas some wells drilled over the structures or close to faults struck hydrocarbons. The seismic data analysis might suggest the faults and fractures are associated with anomalies in amplitude or impedance, which may not be directly attributed to only them as non fractured heterogeneities in sub surface could be the source of such anomalies. Hence, calibration with well data with the seismic generated geometric and surface attributes is essential to arrive at a logical conclusion to infer the effects of faults and associated fracture corridors. Introduction Mumbai High, a giant structure, principally a multilayered Tertiary carbonate oil field, situated in the western offshore of Indian sub continent (Fig-1), was discovered in the year The NW-SE trending doubly plunging anticline structure with its conspicuous eastern faulted limb is within an average water depth of 70m. The structure is further evident by an NW-SE trending fault grains forming a structural low considered to be the permeability barrier in the main L-III reservoir, separating the field into Mumbai High South (MHS) and Mumbai High North (MHN) of different hydrodynamic systems. The huge structure witnessed the hydrocarbon productions from the Basement; Basal Clastics; Carbonate layers L-III; L-II; L-1, and S-1 sand. The field has been on production since Fig-1: Location map psatya002@gmail.com

The largest basement uplifted feature is Mumbai High, with Tertiary carbonate hydrocarbon reservoir.

2 Geological Setting The Western Offshore basin of India is located in a passive margin set up. The entire shelf is split into longitudinal strips by a number of basement controlled faults which resulted in horsts and grabens. The largest basement uplifted feature is Mumbai High, with Tertiary carbonate hydrocarbon reservoir.the drilled well data indicates the basement rocks of varied lithlogy consisting of granite gneiss, biotite schist, phyllites and basalts. The studies of different authors bring out the Mumbai High as a paleo high with syn-sedimentary faulting. The rifting and block movements caused due to extensional tectonics gave rise to prominent highs. One such structure, Mumbai High, remained exposed till Oligocene times. Later the sedimentary sequences covered the basement rocks by the transgressive phases. The weathering due to longer exposures, alterations of mineral constituents, faulting and fracturing by tectonic processes, might be some of the reasons for the development of secondary porosity and permeability, and thereby forming a good reservoir. besides major faults where dip changes are possible and Mean Curvature (Fig-5)(ref-4&5) that deciphers the major and minor faults. Another attribute, Integrated Reflection Strength (Fig-6) in a window covering basement, is generated to bring out reflection strength variations. It is inferred from the data that low impedance values suggest the intensity of faulting thereby fracturing. Fig-2: Core showing the fractures filled with oil Present work The idea is to analyze the work carried out during the year 2007 (ref-1&2) on Basement Oil Exploration and bring out the importance of structure and faults and its associated fracturing with respect to hydrocarbon accumulations. Methodology: The study comprises of integration of geological and geophysical studies. Cores at basement (Fig-2) level are studied for the litholoogy and fractures and their interconnectivity. Facies identification and derivation of petrophysical properties are done through standard log correlations. Geological cross sections are constructed along N-S and E-W directions to understand the structural disposition at basement level. Generated the structure map (Fig-3) to highlight the basement features and their disposition with fault net work by correlating the corresponding event to the basement on PSDM seismic volume. Faults are identified on vertical sections by taking the clue from the discontinuity volume as it helps in identifying the faults and stratigraphic features (ref-3). Extracted geometric attributes along the basement surface such as Dip Angle (Fig-4) which brings out alignments Fig-3: Structure map depicting the structural style along with fault pattern at Basement level psatya002@gmail.com

Fig-4: Dip Angle Attribute along the Basement Surface Fig-6: Integrated Reflection Strength attribute with in window 21oM covering the Basement surface.

$Hydrocarbon occurrences are witnessed in Precambrian granitic rocks and Late Cretaceous basaltic rocks from structures and faults/fractures.$ This paper discusses both these cases by illustrating two cases.

This paper discusses both these cases by illustrating two cases.

3 Fig-4: Dip Angle Attribute along the Basement Surface Fig-6: Integrated Reflection Strength attribute with in window 21oM covering the Basement surface. Blue color is less impedance values and red color indicates high impedance values Analysis and Discussions The Mumbai High basement rocks consist of granite, biotite schist, phylities and basalts. Hydrocarbon occurrences are witnessed in Precambrian granitic rocks and Late Cretaceous basaltic rocks from structures and faults/fractures. This paper discusses both these cases by illustrating two cases. Structural case Fig-5: Mean curvature attribute along the Basement surface Anirbid Sircar(2004)(ref-6), in his general article, while discussing the favourable conditions required in basement reservoirs, mentions that all basement highs are uplifted over a period of time and exposed for a long geological time. The sediments much younger deposited in the flanks and over the highs provide the source and seal mechanism 3

for basement play. Meaning that the oil generated in the flank sediments move to the highs and the overlying sedimentary sequence takes care of seal role.

The basement rocks are overlain by Lower part of Middle Miocene units and flanked by younger Eocene sedimentary sequences, thereby forming a good candidate for striking hydrocarbons.

4 for basement play. Meaning that the oil generated in the flank sediments move to the highs and the overlying sedimentary sequence takes care of seal role. This is almost the case with Mumbai High which formed due to rifting and fault block movements along NNW-SSE trending faults and exposed till Oligocene times (Fig-7, 8 & 9). The basement rocks are overlain by Lower part of Middle Miocene units and flanked by younger Eocene sedimentary sequences, thereby forming a good candidate for striking hydrocarbons. In this case one can observe the severe faulting which might have acted as conduits for hydrocarbons generated in the adjacent flanks in the younger sequences to migrate into the high, thereby achieving the success in well A. Apart from faulting and fracturing, the process of exposure of basement rocks for long periods might have caused extensive weathering and alteration of mineral constituents thereby developing secondary porosity. Faults/Fractures case In this case, the presence of faults and fractures are the guiding factors to make the basement as a fractured play. Mumbai High experienced a lot of faulting due to tectonic activity. These faults have created fractures as faults are the fracture drivers. The earlier figures depict the fault patterns. Next the issue is with the fracture porosity. Anirbid Sircar (2004) (ref-6) emphasis the point on the secondary porosity as the basement rocks are hard and brittle with very low matrix porosity and permeability. The secondary porosity may be due to two reasons, one is tectonic porosity due to joints, faults, fractures, etc. and the other is dissolution porosity due to solution effects in weathering zones or fault zones and effects combined with hydrothermal circulation. The basement core data studies reveal the fact of the presence fractures. In (Fig-10 & 11), an illustration is made by displaying a core where fractures are seen and structure map to show the ideal situation for Well B. The well produced good amount of oil through the fault/ fractures as the well path situated in the fault zone, thus becoming good example for the oil occurrence from the fractured basement reservoir. The entrapment model in both the cases is same as generation of hydrocarbons taking place in the adjacent kitchens and migrated to the nearby favorable locales. Fig-7: Geological cross section across Well A Fig-8: Geological cross section showing favourable condition at well A 4

$in well A and role of faults/ fractures in the granitic rocks in well B. Hither to successes are observed in fractured basement reservoirs through vertical drilling.$ Authors statement Views expressed in the paper are those of authors only and not necessary of the version of ONGC. Further it is stated that data utilized will not affect ONGC s business interest.

Authors statement Views expressed in the paper are those of authors only and not necessary of the version of ONGC. Further it is stated that data utilized will not affect ONGC s business interest.

project. Authors are thankful and grateful to Shri Apurba Saha, Eexecutive Director, Asset Manager, Mumbai High Asset; Shri S.V.

5 in well A and role of faults/ fractures in the granitic rocks in well B. Hither to successes are observed in fractured basement reservoirs through vertical drilling. However, the authors strongly support the idea of inclined or horizontal well drilling to have better understanding of the fracture distribution and improve the success ratio. Authors statement Views expressed in the paper are those of authors only and not necessary of the version of ONGC. Further it is stated that data utilized will not affect ONGC s business interest. Fig-9: Well A drilled over a domal feature shown on structure contour map Acknowledgements Authors are grateful to ONGC management for providing opportunity to work on Basement Oil Exploration project. Authors are thankful and grateful to Shri Apurba Saha, Eexecutive Director, Asset Manager, Mumbai High Asset; Shri S.V.Rao, Executive Director, Basin Manager, Western Offshore Basin and Shri P.K.Bhowmick, ExecutiveDirector, KDMIPE, for continuous guidance and encouragement during the work. All other members of Task Force are thankfully acknowledged for their contribution to the project and encouraging the authors in writing the paper. Fig-10: Core at well B showing fractures filled with Conclusions The basement in Mumbai High structure is not too deep and occurs in the range of m and hence focused and exclusive basement exploration is required as the field established hydrocarbons over the structural highs and in the close vicinity of the main major fault in the eastern side of the field. The illustrated examples in well A & B clearly bring out two different plays. The basaltic flows over structural high Fig-11: Well B at fault zone on structure map 5

6 The authors are grateful to Shri S.K.Verma, GM (Reservoir), Sub-Surface Manager, for constant support, Shri Mahendra Pratap, General Manager (Geophysics) for encouragement, Dr.B.V.R.R.K, Murty, Junior Consultant, ONGC, for suggestions and going through the script and Mr. Sunil Sharma, Manager (Programming) and his IT Team for best efforts in extending full hard ware and soft ware support during accomplishing the task smoothly. References Dr.G.C.Agarwal et al 2007, A Taskforce Report on Basement Oil Exploration: published report by ONGC P.Satyanarayana, et. al, 2008, Fracture characterization on Basement reservoir, A study on Mumbai High: A Technical paper in Geo India 2008 Mike Bahorich and Steve Farmer 1995, 3D Seismic discontinuity for faults and stratigraphic features: The Leading Edge, October Satinder Chopra and Kurt Marfurt 2006, Curvature attribute applications to 3D surface seismic data: CSEG RECORDER September 2006, Andy Roberts 2001, Curvature attributes and their application to 3D interpreted horizons: EAGE 2001, Anirbid Sircar, 2004, Current Science, Vol.87, NO.2, 25 July

Paleo History of a Deeper Level Tidal Lobe and its Facies Analysis : A Case Study

Paleo History of a Deeper Level Tidal Lobe and its Facies Analysis : A Case Study V Chaganti*, T B Singh*, J K Bora*, Dr. Mahendra Pratap* Abstract Hydrocarbon exploitation is a play to exploit the Paleo