Electrical Parameter. Measurement and Test Report for. MaxGreen LED Ltd.

Transcription

1 ~ Electrical Parameter Measurement and Test Report for MaxGreen LED Ltd , 12fF, Wang Cheong Enterprise Centre, Chai Wan Kok Street, Tsuen Wan Dec 07,2012 Product Name: I Flood Light Model No: I MG-XFL-150W Test Engineer: I David Zhang Report No.: I BTR Sample Received Date: IDec 05, 2012 Test Performed Date: Dec 06, 2012 Reviewed By: Prepared By: Steven Hs BEST Test Service Shenzhen Co., Ltd. 1st Floor. 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China TEL: FAX: certification@bestcert.cn ~!~~~ Efficient Lighting Initiative Note: The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of BEST's Client and is provided pursuant to the agreement between BEST and its Client. BEST's responsibility and Liability are limited to the tenms and conditions of the agreement. BEST assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the BEST name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by BEST. The observations and test results in this report are relevant only to the sample tested. This report by itself does not cover that the material, product. of service is or has ever been under a BEST certification program. National Voluntary Laboratory Accreditation Program (NVLAP) has accredited this laboratory under IS017025: 2005 for specific laboratory activities as listed in the NVLAP directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation.

2 MaxGreen LED Ltd. 1 - GENERAL INFORMATION Test Date Test performed Date: Dec 06, 2012 Testing agency BEST Test Service Shenzhen Co., Ltd. The Energy Efficiency Lab used by BEST to collect energy efficiency measurement data is located in 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China. BEST Test Service Shenzhen Co., Ltd is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary Laboratory Accredited Program (Lab Code ). BEST Test Service Shenzhen Co., Ltd is also an ELI accredited lab for lighting products (ELI Certificate No. ELI-L ) and UL accredited lab for lighting products Adds:1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China TEL: FAX: certification@bestcert.cn Manufacturer's name and designation of SSL product under test Manufacture Name: MaxGreen LED Ltd. Manufacture Address: Unit 1201, 12/F, Bonham Commercial Centre, Bonham Strand West, Sheung Wan Applicant Name: MaxGreen LED Ltd. Applicant Address: Unit 1201, 12/F, Bonham Commercial Centre, Bonham Strand West, Sheung Wan Brands:MaxGreenLED Product Name: Flood Light Product SKU: MG-XFL-150W Measurement quantities measured Measured quantity: 1pc Date of Receiving Sample:Dec 05, 2012 Rated electrical values (clarify AC (frequency) or DC) Nominal Operation Voltage : AC 277V/60Hz Nominal Power : 150W Number of hours operated prior to measurement 0 hours Total operating time of the product for measurements including stabilization 4.0 Hours Ambient temperature 25 Report No.BTR Page 2 of 6 Electrical Parameter Test Report

3 MaxGreen LED Ltd. Orientation (burning position) of SSL product during test Base Up Stabilization time 3.0 Hours Equipment used Device Manufacture Model No Serial No Cal. Date Cal Due Date 5 1/2 Digital Dual Display Multimeter AC Power Source Agilent U3402A MY Oct 18, 2012 Oct 17, 2013 California Instrument 1501L L03572 N/A N/A Digital Power Meter YOKOGAWA WT210 91K Oct 18, 2012 Oct 17, 2013 Second Meter TIANFU PC 396 N/A Oct 18, 2012 Oct 17, 2013 Report No.BTR Page 3 of 6 Electrical Parameter Test Report

4 MaxGreen LED Ltd. 2 Test Data Product Name: Flood Light Environment: Temp25.2; Humi: 47% Note: Sample No. ITHD Power Efficiency L1 13.3% Report No.BTR Page 4 of 6 Electrical Parameter Test Report

5 The Test Report of PF9811 Digital Power Meter Page 1 of 2 Voltage RMS 277.0(V) Current RMS 0.586(A) Power (W) Power Factor Freq (Hz) Voltage Resolution: V/div Crest Value: V Current Resolution: A/div Crest Value: A 1 K 50 Voltage Spectrum UTHD: 0.4%(IEC) UH3: 0.1% UH5: 0.1% UH7: 0.1% UH9: 0.1% 1 K 50 Current Spectrum ITHD: 14.1%(IEC) IH3: 9.3% IH5: 7.1% IH7: 5.2% IH9: 3.5% Manufacturer:MAX GREEN Product type:mg-xfl-150w Temperature:25deg Verifier: Remark: Serial Num.: Humidity:65% Inspector:

6 The Test Report of PF9811 Digital Power Meter Page 2 of 2 Urms: (V) Ucf : 1.42 Uthd: 0.4%(IEC) Arms: 0.586(A) Acf : 1.50 Ithd: 14.1%(IEC) Voltage Harmonic Current Harmonic Num. Relative Absolute Relative Absolute ma/w % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % Manufacturer:MAX GREEN Product type:mg-xfl-150w Temperature:25deg Verifier: Remark: Serial Num.: Humidity:65% Inspector: