Nederlandse norm. NEN-EN-ISO (en) Geographic information - Services (ISO 19119:2016,IDT)
|
|
- Harry Stone
- 6 years ago
- Views:
Transcription
1 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This document may only be used on a stand-alone PC. Use in a network is only permitted when a supplementary license agreement for us in a network with NEN has been concluded. Nederlandse norm NEN-EN-ISO (en) Geographic information - Services (ISO 19119:2016,IDT) Vervangt NEN-EN-ISO 19119:2006; NEN-EN-ISO 19119:2006/A1:2011 ICS maart 2016
2 NEN-EN-ISO Als Nederlandse norm is aanvaard: - EN ISO 19119:2016,IDT - ISO 19119:2016,IDT Normcommissie "Geo-informatie" THIS PUBLICATION IS COPYRIGHT PROTECTED DEZE PUBLICATIE IS AUTEURSRECHTELIJK BESCHERMD Apart from exceptions provided by the law, nothing from this publication may be duplicated and/or published by means of photocopy, microfilm, storage in computer files or otherwise, which also applies to full or partial processing, without the written consent of the Netherlands Standardization Institute. The Netherlands Standardization Institute shall, with the exclusion of any other beneficiary, collect payments owed by third parties for duplication and/or act in and out of law, where this authority is not transferred or falls by right to the Reproduction Rights Foundation. Auteursrecht voorbehouden. Behoudens uitzondering door de wet gesteld mag zonder schriftelijke toestemming van het Nederlands Normalisatie-instituut niets uit deze uitgave worden verveelvoudigd en/of openbaar gemaakt door middel van fotokopie, microfilm, opslag in computerbestanden of anderszins, hetgeen ook van toepassing is op gehele of gedeeltelijke bewerking. Het Nederlands Normalisatie-instituut is met uitsluiting van ieder ander gerechtigd de door derden verschuldigde vergoedingen voor verveelvoudiging te innen en/of daartoe in en buiten rechte op te treden, voor zover deze bevoegdheid niet is overgedragen c.q. rechtens toekomt aan de Stichting Reprorecht. Although the utmost care has been taken with this publication, errors and omissions cannot be entirely excluded. The Netherlands Standardization Institute and/or the members of the committees therefore accept no liability, not even for direct or indirect damage, occurring due to or in relation with the application of publications issued by the Netherlands Standardization Institute. Hoewel bij deze uitgave de uiterste zorg is nagestreefd, kunnen fouten en onvolledigheden niet geheel worden uitgesloten. Het Nederlands Normalisatie-instituut en/of de leden van de commissies aanvaarden derhalve geen enkele aansprakelijkheid, ook niet voor directe of indirecte schade, ontstaan door of verband houdend met toepassing van door het Nederlands Normalisatie-instituut gepubliceerde uitgaven Nederlands Normalisatie-instituut Postbus 5059, 2600 GB Delft Telefoon (015) , Fax (015)
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM NEN-EN-ISO 19119:2016 EN ISO February 2016 ICS Supersedes EN ISO 19119:2006 English Version Geographic information - Services (ISO 19119:2016) Information géographique - Services (ISO 19119:2016) Geoinformation - Dienste (ISO 19119:2016) This European Standard was approved by CEN on 20 February CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19119:2016 E
4 EN ISO 19119:2016 (E) NEN-EN-ISO 19119:2016 Contents European foreword
5 NEN-EN-ISO 19119:2016 EN ISO 19119:2016 (E) European foreword This document (EN ISO 19119:2016) has been prepared by Technical Committee ISO/TC 211 Geographic information/geomatics in collaboration with Technical Committee CEN/TC 287 Geographic Information the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 19119:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 19119:2016 has been approved by CEN as EN ISO 19119:2016 without any modification. 3
6
7 NEN-EN-ISO 19119:2016 INTERNATIONAL STANDARD ISO Second edition Geographic information Services Information géographique Services Reference number ISO 19119:2016(E) ISO 2016
8 ISO 19119:2016(E) NEN-EN-ISO 19119:2016 COPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO s member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel Fax copyright@iso.org ii ISO 2016 All rights reserved
9 NEN-EN-ISO 19119:2016 ISO 19119:2016(E) Contents Page Foreword...vi Introduction...vii 1 Scope Conformance Claiming conformance General Enterprise viewpoint Computational viewpoint Information viewpoint Service taxonomies Engineering viewpoint Technology viewpoint Normative references Terms and definitions and abbreviations Terms and definitions Abbreviations Notation General Conformance class Requirements class Rules Identifiers Conceptual schemas Descriptions of concepts Architecture patterns Overview of geographic services architecture Purpose and justification Relationship to ISO Interoperability reference model based on ISO RM-ODP Service abstraction Interoperability Use of other geographic information standards in service specifications Enterprise viewpoint: A context for services Enterprise viewpoint Enterprise viewpoint service specifications Examples of relevant standards Example and tools Computational viewpoint: A basis for service interfaces and chaining Component and service interoperability and the computational viewpoint Services, interfaces and operations Computational viewpoint service specifications Requirements class for computational viewpoint service specifications Service interfaces with operations Service behaviour and constraints Service chaining General Anatomy of a service chain Service chain modelling Services organizer folder Services to enable service chaining Architecture patterns for service chaining...28 ISO 2016 All rights reserved iii
10 ISO 19119:2016(E) NEN-EN-ISO 19119: Variations on chaining patterns Service metadata Simple service architecture Examples of relevant standards Examples and tools: Service modelling with SoaML Information viewpoint: A basis for semantic interoperability Information model interoperability and the information viewpoint Information viewpoint Service specifications Service taxonomies Need for multiple service taxonomies Service taxonomies and requirements Architectural reference model Definition of the Architectural reference model Uses of the Architectural reference model Overview of the Architectural reference model Services and service interfaces Identifying services and service interfaces for geographic information Types of geographic information services Requirement for service taxonomy Types of information technology services relevant to geographic information Extension of service types for geographic information Geographic architecture services taxonomy Geographic architecture services taxonomy requirements Geographic boundary/human interaction services Geographic model/information management services Geographic workflow/task management services Geographic processing services Geographic communication services Geographic system management and security services ISO suite of International Standards in geographic architecture services taxonomy Geographic service chaining validity User-perspective Lifecycle model for Services User-defined service taxonomies Services organizer folder (SOF) Grouping of services Image exploitation SOF Geographic data fusion SOF Semantic information models Examples of relevant standards Examples and tools Engineering viewpoint: A basis for distribution and communication patterns Distribution transparencies and the engineering viewpoint Distributing components using a multi-tier architecture model Distribution transparencies Engineering viewpoint Service specifications Multi-style SOA Relevant architectural styles Service-oriented architectures Representational State Transfer (REST) Web Technology viewpoint: A basis for cross platform interoperability Infrastructure interoperability and the technology viewpoint Need for multiple platform-specific specifications Conformance between platform-neutral and platform-specific service specifications From platform-neutral to platform-specific specifications Technology objects...68 iv ISO 2016 All rights reserved
11 NEN-EN-ISO 19119:2016 ISO 19119:2016(E) 12.6 Technology viewpoint service specifications Requirements class for technology viewpoint Technology mappings Architectural classification according to cloud computing service categories...71 Annex A (normative) Conformance...72 Annex B (informative) Example user scenarios...78 Annex C (informative) Principles for mapping to distributed computing platforms...81 Annex D (informative) Use case-based methodology...92 Annex E (informative) Example Use case template...95 Annex F (informative) Service modelling SoaML...98 Bibliography ISO 2016 All rights reserved v
12 ISO 19119:2016(E) NEN-EN-ISO 19119:2016 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO s adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information. The committee responsible for this document is ISO/TC 211, Geographic information/geomatics. This second edition cancels and replaces the first edition (ISO 19119:2005), which has been technically revised. It also incorporates the Amendment ISO 19119:2005/Amd 1:2008. vi ISO 2016 All rights reserved
13 NEN-EN-ISO 19119:2016 ISO 19119:2016(E) Introduction The widespread application of computers and use of geographic information systems (GIS) have led to the increased analysis of geographic data within multiple disciplines. Based on advances in information technology, society s reliance on such data are growing. Geographic datasets are increasingly being shared, exchanged, and used for purposes other than their producers intended ones. GIS, remote sensing, automated mapping and facilities management (AM/FM), Spatial Data Infrastructure (SDI), traffic analysis, geopositioning systems, and other technologies for Geographic Information (GI) are entering a period of radical integration. This International Standard provides a framework for platform neutral and platform specific specification of services that can enable users to access, process and manage geographic data from a variety of sources, potentially for various distributed computing platforms (DCPs). a framework for platform neutral and platform specific specification of services means that this International Standard provides requirements for how services shall be specified in such a way that one service can be specified independently of one or more underlying distributed computing platforms. The framework provides requirements for a further mapping to specific platforms in order to enable conformant platform specific specifications to ensure conforming and interoperable service implementations. access, process and manage means that geodata users can query remote databases and control remote processing resources and also take advantage of other distributed computing technologies, such as software delivered to the user s local environment from a remote environment for temporary use; from a variety of sources means that users will have access to data acquired in a variety of ways and stored in a wide variety of relational and non-relational databases; across a generic computing interface means that ISO interfaces provide reliable communication between otherwise disparate software resources that are equipped to use these interfaces; within an open information technology environment means that this International Standard enables geoprocessing to take place outside of the closed environment of monolithic GIS, remote sensing, and AM/FM systems that control and restrict database, user interface, network and data manipulation functions; services shall be categorised according to a service taxonomy based on architectural areas and may also be categorised according to a usage life cycle perspective, as well as according to domain specific and user defined service taxonomies, providing support for publication and discovery of services. The difference between this version of this International Standard and the previous ISO 19119:2005 version is the following: This International Standard has defined a set of requirements and related abstract tests for the specification of services according to enterprise, computational, information, engineering and technology viewpoints. This International Standard has defined a set of requirements for categorizing services according to service taxonomies. The service metadata has been moved to ISO Service policies, service contracts including service level agreements (SLAs) are currently not specified as part of this International Standard, as these are considered most relevant for service deployment and service ownership, which is not currently a focus for this International Standard. ISO 2016 All rights reserved vii
14 NEN-EN-ISO 19119:2016
15 NEN-EN-ISO 19119:2016 INTERNATIONAL STANDARD ISO 19119:2016(E) Geographic information Services 1 Scope This International Standard defines requirements for how platform neutral and platform specific specification of services shall be created, in order to allow for one service to be specified independently of one or more underlying distributed computing platforms. This International Standard defines requirements for a further mapping from platform neutral to platform specific service specifications, in order to enable conformant and interoperable service implementations. This International Standard addresses the Meta:Service foundation of the ISO geographic information reference model described in ISO :2014, Clause 6 and Clause 8, respectively. This International Standard defines how geographic services shall be categorised according to a service taxonomy based on architectural areas and allows also for services to be categorised according to a usage life cycle perspective, as well as according to domain specific and user defined service taxonomies, providing support for easier publication and discovery of services. 2 Conformance 2.1 Claiming conformance Any product claiming conformance with the conformance classes in this International Standard shall pass all the associated requirements described in the abstract test suite given in Annex A. 2.2 General This International Standard defines six conformance classes shown in Table 1 to Table 6, matching the six requirements classes described in Clause 7 to Clause 12. Any service claiming conformance to any requirements class in this International Standard shall pass all of the tests listed in the corresponding conformance class, which are described in detail in the abstract test suites in Annex A. Each test relates to one or more specific requirements, which are explicitly indicated in the description of the test. 2.3 Enterprise viewpoint The enterprise viewpoint conformance class is shown in Table 1. Table 1 Enterprise viewpoint conformance class Conformance class /conf/enterpriseviewpoint Requirements /req/enterpriseviewpoint (Table 11) Tests All tests in A Computational viewpoint The computational viewpoint conformance class is shown in Table 2. ISO 2016 All rights reserved 1
16 Bestelformulier Stuur naar: NEN Standards Products & Services t.a.v. afdeling Klantenservice Antwoordnummer WB Delft Ja, ik bestel NEN Standards Products & Services Postbus GB Delft Vlinderweg AX Delft T (015) F (015) ex. NEN-EN-ISO 19119:2016 en Geographic information - Services Wilt u deze norm in PDF-formaat? Deze bestelt u eenvoudig via Gratis nieuwsbrieven Wilt u op de hoogte blijven van de laatste ontwikkelingen op het gebied van normen, normalisatie en regelgeving? Neem dan een gratis abonnement op een van onze nieuwsbrieven. Gegevens Bedrijf / Instelling T.a.v. O M O V Klantnummer NEN Uw ordernummer BTW nummer Postbus / Adres Postcode Plaats Telefoon Fax Factuuradres (indien dit afwijkt van bovenstaand adres) Postbus / Adres Postcode Plaats Datum Handtekening Retourneren Fax: (015) klantenservice@nen.nl Post: NEN Standards Products & Services, t.a.v. afdeling Klantenservice Antwoordnummer 10214, 2600 WB Delft (geen postzegel nodig). Voorwaarden De prijzen zijn geldig tot 31 december 2016, tenzij anders aangegeven. Alle prijzen zijn excl. btw, verzend- en handelingskosten en onder voorbehoud bij o.m. ISO- en IEC-normen. Bestelt u via de normshop een pdf, dan betaalt u geen handeling en verzendkosten. Meer informatie: telefoon (015) , dagelijks van 8.30 tot uur. Wijzigingen en typefouten in teksten en prijsinformatie voorbehouden. U kunt onze algemene voorwaarden terugvinden op: Normalisatie: de wereld op één lijn. preview
Hard coal and coke - Mechanical sampling - Part 2: Coal - Sampling from moving streams (ISO :2001,IDT) januari 2002 ICS ;
Nederlandse norm Steenkool en cokes - Mechanische monsterneming - Deel 2: Steenkool - Monsterneming van bewegende stromen (ISO 13909-2:2001,IDT) NEN-ISO 13909-2 (en) Hard coal and coke - Mechanical sampling
More informationNetherlands standard NEN 7777+C1. (en) Environment and food - Performance characteristics of measurement methods
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
More informationVoorbeeld. Preview. Dit document is een voorbeeld van NEN / This document is a preview by NEN
Nederlandse NEN-ISO 8534 Plantaardige en dierlijke oliën en vetten. Bepaling van het watergehalte. Methode volgens Karl Fischer (ISO 8543:1996) Animal and vegetable fats and oils. Determination of water
More informationVoorbeeld. Preview. NEN-ISO 5168 (en) Measurement of fluid flow - Procedures for the evaluation of uncertainties (ISO 5168:2005,IDT)
Nederlandse norm Measurement of fluid flow - Procedures for the evaluation of uncertainties (ISO 5168:2005,IDT) NEN-ISO 5168 (en) Vervangt NPR-ISO/TR 5168:1998 juli 2005 ICS 17.120.10 Dit document mag
More informationNederlandse norm. NEN 5699 (en) Radioactivity measurements Determination method of the rate of the radon exhalation of dense building materials
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
More informationVoorbeeld. Preview. norm Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge opticalemission
Nederlandse norm Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge opticalemission spectrometry (ISO 16962:2005,IDT) NEN-ISO 16962 (en) november 2005
More informationNederlandse voornorm. NVN-CEN/TS (en) Buitenlucht - Bepaling van de deeltjes aantallen van atmosferische aerosolen
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
More informationVoorbeeld. norm Water - Bepaling van ammonium - Deel 1: Handmatige spectrometrische methode (ISO :1984,IDT) Preview. NEN-ISO (en)
Nederlandse norm Water - Bepaling van ammonium - Deel 1: Handmatige spectrometrische methode (ISO 7150-1:1984,IDT) NEN-ISO 7150-1 (en) Water quality - Determination of ammonium - Part 1: Manual spectrometric
More informationVoorbeeld. Preview. Part 2: Analytical colorimetry. Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power
INTERNATIONAL STANDARD ISO 18314- First edition 015-06-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationVoorbeeld. Preview ISO 9562 INTERNATIONAL STANDARD. Water quality Determination of adsorbable organically bound halogens (AOX)
INTERNATIONAL STANDARD ISO 9562 Second edition 1998-10-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationNederlandse norm. NEN-ISO (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
More informationNederlandse praktijkrichtlijn. NPR-ISO/TS (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
More informationVoorbeeld. Preview IS INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 13685 First edition 1997-08- 15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationVoorbeeld. Preview. NEN-ISO (en) Dit document is een voorbeeld van NEN / This document is a preview by NEN. Nederlandse
Nederlandse norm Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method (ISO 14966:2002,IDT) NEN-ISO 14966 (en) januari 2003 ICS 13.040.20
More informationNederlandse norm. NEN-ISO (en) Brandanalyse - Genereren en meten van aërosolen (ISO 29904:2013,IDT)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
More informationDit document bevat de officiële Engelse versie van de Europese norm EN 932-1, augustus 1996.
Nederlandse NEN-EN 932-1 Beproevingsmethoden voor algemene eigenschappen van toeslagmaterialen. Deel 1 : Methoden voor monsterneming Tests for general properties of aggregates. Part 1 : Methods for sampling
More informationINTERNATIONAL STANDARD. Qualith de l ea r- Etalonnage et Evaluation des mhthodes d analyse et estimation
INTERNATIONAL STANDARD ISO 8466- First edition 990-03-0 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 19119:2006 Geographic information - Services Geographic information - Services EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN ISO
More informationVoorbeeld. Preview ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6561-1 First edition 2005-02-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationVervangt NEN-EN 12977:1997 Ontw. Nederlandse voornorm. NVN-ENV (en)
Vervangt NEN-EN 12977:1997 Ontw. Nederlandse voornorm Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationVoorbeeld. International Preview
International Standard @ 4311 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik
More informationINTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME>KflYHAPOfiHAR OPI-AHM3ALWlR I-IO CTAH~APTM3ALWl*ORGANISATION INTERNATIONALE DE NORMALISATION
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME>KflYHAPOfiHAR OPI-AHM3ALWlR I-IO CTAH~APTM3ALWl*ORGANISATION INTERNATIONALE DE NORMALISATION Dit document mag slechts op een stand-alone
More informationEnglish Version. This Technical Report was approved by CEN on 18 April It has been drawn up by the Technical Committee CEN/TC 210.
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13121-5 May 217 ICS 23.2.1 English Version GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-vessel This Technical
More informationVervangt NEN-EN Ontw. Nederlandse norm. NEN-EN (en)
Vervangt NEN-EN 37-.994 Ontw Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik
More informationEnglish Version. Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15310-2 November 2006 ICS 13.030.10; 13.030.20 English Version Characterization of waste - Sampling of waste materials - Part 2: Guidance on
More informationVoorbeeld. Preview INTERNATIONAL STANDARD
INTERNATIONAL STANDARD First edi tion 1992-04-01 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 19117:2006 Geographic information - Portrayal Geographic information - Portrayal EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationNederlandse norm. NEN-EN (en)
Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This
More informationINTERNATIONAL STANDARD. Anhydrous hydrogen fluoride for industrial use - Determination of water content - Karl Fischer method
INTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOLIHAJI OPI-AHM3ALW.I I-l0 CTAHAAPTM3ALWiM.ORGANISATION INTERNATIONALE DE NORMALISATION Dit document mag slechts op een stand-alone
More informationINTERNATIONAL STANDARD. Standard layout for a method of Chemical analysis by gas chromatography
INTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXJIJYHAPOjIJHAfl OPI-AHW3ALU-W l-io CTAHflAPTki3ALJWW.ORGANISATION [NTERNATIONALE DE NORMALISATION Dit document mag slechts op
More informationINTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEX~YHAPO~HAR fl0 CTAH~APTb INTERNATIONALE DE NORMALISATION
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEX~YHAPO~HAR OPrAHM3Al@lR fl0 CTAH~APTb l3al.wl@organisation INTERNATIONALE DE NORMALISATION Dit document mag slechts op een stand-alone
More informationINTERNATIONAL STANDARD. Water quality - Measurement of gross beta activity in non-sahne water
INTERNATIONAL STANDARD First edi tion 19924 2-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationVoorbeeld REDLINE VERSION. Preview IEC Design criteria of Overhead transmission lines Design criteria. colour inside. Edition 4.
IEC 60826 Edition 4.0 2017-02 REDLINE VERSION colour inside Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationINTERNATIONAL STANDARD 9487
INTERNATIONAL STANDARD 9487 First edition 1991-08-15 ----- ------ -- Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD Is0 9486 First edition 1991-08-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationINTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWblE~YHAPOJ1HAR OPrAHi43AL&lR fl0 CTAH~APTbl3AlJMiWORGANISATION INTERNATIONALE DE &ORMALISATlON
International Standard 642611 INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWblE~YHAPOJ1HAR OPrAHi43AL&lR fl0 CTAH~APTbl3AlJMiWORGANISATION INTERNATIONALE DE &ORMALISATlON Dit document mag slechts op een
More informationISO INTERNATIONAL STANDARD. Geographic information Metadata Part 2: Extensions for imagery and gridded data
INTERNATIONAL STANDARD ISO 19115-2 First edition 2009-02-15 Geographic information Metadata Part 2: Extensions for imagery and gridded data Information géographique Métadonnées Partie 2: Extensions pour
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14689-1:2004 Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description Geotechnical investigation and testing
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 19115-2:2010 Geographic information - Metadata - Part 2: Extensions for imagery and gridded data EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN ISO 19115-2:2010 sisaldab
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 13802:2006 Plastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile impact-testing Plastics - Verification of pendulum impact-testing machines - Charpy,
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 19162 First edition 2015-08-15 Geographic information Wellknown text representation of coordinate reference systems Information géographique Représentation textuelle bien lisible
More informationISO INTERNATIONAL STANDARD. Geographic information Spatial referencing by coordinates Part 2: Extension for parametric values
INTERNATIONAL STANDARD ISO 19111-2 First edition 2009-08-15 Geographic information Spatial referencing by coordinates Part 2: Extension for parametric values Information géographique Système de références
More informationISO INTERNATIONAL STANDARD. Geographic information Spatial referencing by coordinates
INTERNATIONAL STANDARD ISO 19111 Second edition 2007-07-01 Geographic information Spatial referencing by coordinates Information géographique Système de références spatiales par coordonnées Reference number
More informationISO INTERNATIONAL STANDARD. Thermal bridges in building construction Linear thermal transmittance Simplified methods and default values
INTERNATIONAL STANDARD ISO 14683 First edition 1999-06-15 Thermal bridges in building construction Linear thermal transmittance Simplified methods and default values Points thermiques dans les bâtiments
More informationPart 1: Fundamentals
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 19101-1 First edition 2014-11-15 Geographic information Reference model Part 1: Fundamentals Information géographique Modèle de référence Partie
More informationSýnishorn. Water quality Enumeration of Clostridium perfringens Method using membrane filtration
INTERNATIONAL STANDARD ISO 14189 First edition 2013-11-01 Water quality Enumeration of Clostridium perfringens Method using membrane filtration Qualité de l eau Dénombrement de Clostridium perfringens
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 15530-3 December 2007 ICS 17.040.30 English Version Geometrical product specifications (GPS) - Coordinate measuring machines
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 15883-5 November 2005 ICS 11.080.10 English Version Washer-disinfectors - Part 5: Test soils and methods for demonstrating
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1159-2:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity Advanced technical ceramics - Ceramic composites
More informationVoorbeeld. Preview ISO/TR TECHNICAL REPORT. Textiles Composition testing Identification of fibres
TECHNICAL REPORT ISO/TR 11827 First edition 2012-06-01 Textiles Composition testing Identification of fibres Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk
More informationISO INTERNATIONAL STANDARD. Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: Simplified method
INTERNATIONAL STANDARD ISO 10077-1 First edition 2000-07-15 Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: Simplified method Performance thermique des fenêtres,
More informationHard coal and coke Mechanical sampling. Part 7: Methods for determining the precision of sampling, sample preparation and testing
INTERNATIONAL STANDARD ISO 13909-7 Second edition 016-07-01 Hard coal and coke Mechanical sampling Part 7: Methods for determining the precision of sampling, sample preparation and testing Houille et coke
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15042-1:2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 0077-2 First edition 2003-0-0 Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames Performance thermique
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16272-5 April 2014 ICS 93.100 English Version Railway applications - Track - Noise barriers and related devices acting on
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12828-2 First edition 2016-12-15 Validation methods for fire gas analyses Part 2: Intralaboratory validation of quantification methods Méthode de validation des analyses de gaz
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13095 First edition 2014-07-15 Surface Chemical Analysis Atomic force microscopy Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 17268 December 2018 ICS 35.240.60 English Version Intelligent transport systems - ITS spatial data - Data exchange on changes
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14770:2005 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) Bitumen and bituminous binders - Determination of
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17322 First edition 2015-06-01 Fertilizers and soil conditioners Analytical methods for Sulfur Coated Urea (SCU) Matières fertilisantes Méthodes analytiques pour l urée enrobée
More informationMetallic materials Knoop hardness test. Part 1: Test method. Matériaux métalliques Essai de dureté Knoop Partie 1: Méthode d'essai
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 4545-1 Second edition 2017-12 Metallic materials Knoop hardness test Part 1: Test method Matériaux métalliques Essai de dureté Knoop Partie 1:
More informationISO INTERNATIONAL STANDARD. Geographic information Metadata Part 2: Extensions for imagery and gridded data
INTERNATIONAL STANDARD ISO 19115-2 First edition 2009-02-15 Geographic information Metadata Part 2: Extensions for imagery and gridded data Information géographique Métadonnées Partie 2: Extensions pour
More informationTurbines and turbine sets Measurement of emitted airborne noise Engineering/survey method
INTERNATIONAL STANDARD ISO 10494 Second edition 2018-04 Turbines and turbine sets Measurement of emitted airborne noise Engineering/survey method Turbines et groupes de turbines Mesurage du bruit aérien
More informationSVENSK STANDARD SS-EN ISO 306:2004. Plast Termoplaster Bestämning av mjukningspunkt enligt Vicat (VST) (ISO 306:2004)
SVENSK STANDARD SS- Fastställd 2004-08-20 Utgåva 2 Plast Termoplaster Bestämning av mjukningspunkt enligt Vicat (VST) (ISO 306:2004) Plastics Thermoplastic materials Determination of Vicat softening temperature
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1262:2004 Surface active agents - Determination of ph value of solutions or dispersions Surface active agents - Determination of ph value of solutions or dispersions EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
TECHNICAL REPORT ISO/TR 19473 First edition 2015-09-01 Space systems Best practices for orbit elements at payload LV separation Systèmes spatiaux Meilleures pratiques pour les éléments en orbite à charge
More informationDEUTSCHE NORM DIN EN ISO 2439
DEUTSCHE NORM DIN EN ISO 439 D May 009 ICS 83.100 Supersedes DIN EN ISO 439:001-0 Flexible cellular polymeric materials Determination of hardness (indentation technique) (ISO 439:008) English version of
More informationDetermination of particle size distribution Single particle light interaction methods. Part 4:
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 21501-4 Second edition 2018-05 Determination of particle size distribution Single particle light interaction methods Part 4: Light scattering airborne
More informationPart 5: Total stations
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 17123-5 Third edition 2018-02 Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 5: Total stations
More informationSVENSK STANDARD SS-EN :2005. Konststen Provningsmetoder Del 6: Bestämning av beständighet mot plötslig temperaturförändring (termisk chock)
SVENSK STANDARD SS-EN 14617-6:2005 Fastställd 2005-03-24 Utgåva 1 Konststen Provningsmetoder Del 6: Bestämning av beständighet mot plötslig temperaturförändring (termisk chock) Agglomerated stone Test
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16960 First edition 2014-10-01 Natural gas Determination of sulfur compounds Determination of total sulfur by oxidative microcoulometry method Gaz naturel Détermination des composés
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14284:2003 Steel and iron - Sampling and preparation of samples for the determination of chemical composition Steel and iron - Sampling and preparation of samples for the determination
More informationSVENSK STANDARD SS-EN ISO
SVENSK STANDARD SS-EN ISO 376:2005 Fastställd 2005-02-04 Utgåva 2 Metalliska material Kalibrering av kraftmätdon avsedda för kontroll av maskiner för enaxlig provning (ISO 376:2004) Metallic materials
More informationEnglish Version. This Technical Specification (CEN/TS) was approved by CEN on 24 April 2011 for provisional application.
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16190 February 2012 ICS 13.030.01 English Version Sludge, treated biowaste and soil - Determination of dioxins and furans
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10703 Second edition 2007-11-15 Water quality Determination of the activity concentration of radionuclides Method by high resolution gamma-ray spectrometry Qualité de l'eau Détermination
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17315 First edition 2014-10-01 Petroleum products and other liquids Ethanol Determination of total acidity by potentiometric titration Produits pétroliers et autres liquides
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6980-3 First edition 2006-10-01 Nuclear energy Reference beta-particle radiation Part 3: Calibration of area and personal dosemeters and the determination of their response as
More informationOptics and photonics Interferometric measurement of optical elements and optical systems. Part 4:
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14999-4 Second edition 2015-08-01 Optics and photonics Interferometric measurement of optical elements and optical systems Part 4: Interpretation
More informationMetallic materials Brinell hardness test. Part 3: Calibration of reference blocks
INTERNATIONAL STANDARD ISO 6506-3 Third edition 2014-10-01 Metallic materials Brinell hardness test Part 3: Calibration of reference blocks Matériaux métalliques Essai de dureté Brinell Partie 3: Étalonnage
More informationhttp://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se SVENSK STANDARD SS-EN ISO 19111:2007 Fastställd 2007-07-13 Utgåva 2 Geografisk information Modell för att beskriva
More informationMechanical vibration Rotor balancing. Part 2: Vocabulary. Vibrations mécaniques Équilibrage des rotors Partie 2: Vocabulaire. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 21940-2 First edition 2017-05 Mechanical vibration Rotor balancing Part 2: Vocabulary Vibrations mécaniques Équilibrage des rotors Partie 2: Vocabulaire
More informationISO 385 INTERNATIONAL STANDARD. Laboratory glassware Burettes. Verrerie de laboratoire Burettes. First edition
INTERNATIONAL STANDARD ISO 385 First edition 2005-04-15 Laboratory glassware Burettes Verrerie de laboratoire Burettes Reference number ISO 385:2005(E) ISO 2005 PDF disclaimer This PDF file may contain
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15641 August 2007 ICS 67.050 English Version Food analysis - Determination of pesticide residues by LC- MS/MS - Tandem mass spectrometric parameters
More informationVägbelysning Del 3: Beräkning av prestanda. Road lighting Part 3: Calculation of performance
SVENSK STANDARD SS-EN 13201-3 Fastställd 2003-12-12 Utgåva 1 Vägbelysning Del 3: Beräkning av prestanda Road lighting Part 3: Calculation of performance ICS 93.080.40 Språk: engelska Publicerad: januari
More informationISO INTERNATIONAL STANDARD. Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11890-1 Second edition 2007-07-01 Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method Peintures
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9276-6 First edition 2008-09-15 Representation of results of particle size analysis Part 6: Descriptive and quantitative representation of particle shape and morphology Représentation
More informationVoor de bemonstering van in de lucht zwevende radioactieve stoffen is de internationale norm ISO 2889, Ie druk, 1975, als Nederlandse norm aanvaard.
UDC 621.039.54:628.511.1:539.16:620.113.43 Bemonstering van in de lucht zwevende radioactieve stoffen NEN-ISO 2889 Sampling of airborne radioactive substances le druk, augustus 1979 Voor de bemonstering
More informationFINAL DRAFT FprEN
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 17199-4 November 2018 ICS 13.040.30 English Version Workplace exposure - Measurement of dustiness of bulk materials that contain or
More informationGeotechnical investigation and testing Identification and classification of soil. Part 1: Identification and description
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14688-1 Second edition 2017-12 Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description
More informationISO 2575 INTERNATIONAL STANDARD. Road vehicles Symbols for controls, indicators and tell-tales
INTERNATIONAL STANDARD ISO 2575 Eighth edition 2010-07-01 Road vehicles Symbols for controls, indicators and tell-tales Véhicules routiers Symboles pour les commandes, indicateurs et témoins Reference
More informationISO INTERNATIONAL STANDARD. Reference radiation fields Simulated workplace neutron fields Part 1: Characteristics and methods of production
INTERNATIONAL STANDARD ISO 12789-1 First edition 2008-03-01 Reference radiation fields Simulated workplace neutron fields Part 1: Characteristics and methods of production Champs de rayonnement de référence
More informationISO INTERNATIONAL STANDARD. Optics and photonics Spectral bands. Optique et photonique Bandes spectrales. First edition
INTERNATIONAL STANDARD ISO 20473 First edition 2007-04-15 Optics and photonics Spectral bands Optique et photonique Bandes spectrales Reference number ISO 20473:2007(E) ISO 2007 PDF disclaimer This PDF
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13168 First edition 2015-07-01 Water quality Simultaneous determination of tritium and carbon 14 activities Test method using liquid scintillation counting Qualité de l eau Détermination
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13006 Second edition 2012-03-01 Ceramic tiles Definitions, classification, characteristics and marking Carreaux et dalles céramiques Définitions, classification, caractéristiques
More informationISO/TR TECHNICAL REPORT. Nanotechnologies Methodology for the classification and categorization of nanomaterials
TECHNICAL REPORT ISO/TR 11360 First edition 2010-07-15 Nanotechnologies Methodology for the classification and categorization of nanomaterials Nanotechnologies Méthodologie de classification et catégorisation
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16242 First edition 2011-12-01 Surface chemical analysis Recording and reporting data in Auger electron spectroscopy (AES) Analyse chimique des surfaces Enregistrement et notification
More informationISO INTERNATIONAL STANDARD. Particle size analysis Laser diffraction methods. Analyse granulométrique Méthodes par diffraction laser
INTERNATIONAL STANDARD ISO 13320 First edition 2009-10-01 Particle size analysis Laser diffraction methods Analyse granulométrique Méthodes par diffraction laser Reference number ISO 13320:2009(E) ISO
More informationSVENSK STANDARD SS-EN ISO 13802:2006
SVENSK STANDARD SS-EN ISO 13802:2006 Fastställd 2006-04-12 Utgåva 1 Plast Verifiering av maskiner för slagprov med pendel Charpy, Izod och slagprov vid dragning (ISO 13802:1999, inklusive Corrigendum 1:2000)
More informationDel 1: Mätning och filformat
SVENSK STANDARD SS-EN 13032-1:2004 Fastställd 2004-08-06 Utgåva 1 Ljus och belysning Mätning och presentation av fotometriska data för ljuskällor och ljusarmaturer Del 1: Mätning och filformat Light and
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 2871-1 Second edition 2010-02-15 Surface active agents Detergents Determination of cationic-active matter content Part 1: High-molecular-mass cationic-active matter Agents de
More information