Table SOLAONE SOLAONE 1.5. SOLAONE 1.67 High Index. Version 01/ /14

Size: px

Start display at page:

Download "Table SOLAONE SOLAONE 1.5. SOLAONE 1.67 High Index. Version 01/ /14"

Wesley Burke
6 years ago
Views:

1 SOLAONE - Factt Sheets Table of Contents SOLAONE SOLAONE 1.67 High Index SOLAONE 1.67 High Index PhotoFusion Gray/Brown SOLAONE 1.67 High Index Transitions Gray/Brown SOLAONE 1.59 Polycarbonate SOLAONE 1.59 PhotoFusion Gray/Brown SOLAONE 1.59 Polarized Gray/Brown SOLAONE 1.59 Transitions Gray/Brown SOLAONE 1.5 SOLAONE 1.5 PhotoFusion Gray/Brown SOLAONE 1.5 Transitions Gray/Brown Carl Zeiss Vision Version 01/ /14

2 Substrate : 1.67 (MR 10) Product Name : SOLAOne PROGRESSIVE Cat Code: 637 Product Type : SEMI-FINISHED BLANKS Reference : F _2 Date : 10 May 2005 Page : 1 of 3 Product Range: Diameter Base Add Power Range Rx Range Recommended 73 mm to to mm to to 78 mm to to mm to to mm to to mm to to Material & Coating Specifications: Type 1.67 (MR10) Refractive Index η d = (Helium d line nm) η e = (Mercury e line nm) Abbe Number ν d = 32 ν e = 32 Density 1.37 g.cm -3 UV Protection 100% UVA and UVB (from 380nm to 280nm as per ISO , ANSI Z ) Coating Type Ultra-Tough TM For External Distribution The eye logo, SOLA, Ultra-Tough, and SOLAOne are trademarks of SOLA International Inc. 1 of 23

3 Reference : F _2 Date : 10 May 2005 Page : 2 of 3 Blank Information: Base True Front (1.530) True Front (1.66) Radii Distance Curve mm Back Curve Centre Thickness Edge Thickness at Distance Edge Packaged Weight (g) /- 1mm /- 1mm /- 1mm /- 1mm /- 1mm /- 1mm 8 58 * Measured at the distance edge of the blank. Product Markings: Front Surface : Semi-Visible Markings Front Surface : Ink Markings (Yellow, water based : Uncoated) (Yellow, solvent based : Coated) Back Surface : Coding VRM6+200R AF23 20M Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre Minimum Edge D to D D to +1. D 2.0 or * 1.0 * +1. D to +3. D D to D 0.5 *Thicknesses are based on whichever is the limiting factor. 2 of 23

4 Reference : F _2 Date : 10 May 2005 Page : 3 of 3 Recommended Range Chart: MINUS CYLS S P H E R E S PLANO Extended Range 1. base Recommended of 23

5 PRODUCT FACT SHEET Substrate : 1.67 MR10 PhotoFusion Product Name : SOLAOne PROGRESSIVE Product Type : SEMI-FINISHED BLANKS Reference : FS2 Date : 22 March 2012 Page : 1 of 2 Product Range: Brown Grey CAT Code F40 F39 Diameter Base Add Power Range Rx Range Recommended 73 mm to to mm to to 78 mm to to mm to to mm to to mm to to Material & Coating Specifications: Type MR-10 TM Refractive Index n d = (Helium d line nm) n e = (Mercury e line nm) Abbe Number ν d = 32 ν e = 32 Density 1.37 g.cm -3 UV Protection (ISO) 100% UVA and 100% UVB Coated, Activated : 2.0mm Centre Thickness Coating Type Hard Coated Blank Information: (As measured in R.I) Base True Front (1.530) Radii Back Centre Thickness Edge Thickness at A Packaged Weight (g) (Based on 2.00 add) /- 1mm /- 1mm /- 1mm /- 1mm /- 1mm /- 1mm 8 58 For External Distribution 2012 Carl Zeiss Vision International GmbH. PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH SOLAOne is a trademark of Carl Zeiss Vision Inc. MR-10 is a trademark of Mitsui Chemicals Inc. 4 of 23

6 Reference : FS2 Date : 22 March 2012 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre D to D 1.5 Minimum Edge -1. D to +1. D 2.0 or * 1.0 * +1. D to +3. D D to D 0.5 *Thicknesses are based on whichever is the limiting factor. Product Markings: Front Surface: Semi-Visible Markings Recommended Range Chart: VRM6+200R AF23 (Minus cyl convention) 20M SPHERE Front Surface: Ink Markings PLANO 2. Back Surface Markings SPHERE 5 of 23

7 PRODUCT FACT SHEET Substrate : 1.67 TRANSITIONS SIGNATURE VII Product Name : SOLAOne PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : FS1 Date : 16 December 2013 Page : 1 of 3 Product Range: Product: Gray HC Brown HC LGC: L6434 L6446 Cat Code: V76 V Diameter Base Add Power Range Recommended Rx Range to to to to to to to to to to to to Material & Coating Specifications: Type MR-10 Refractive Index n d = n e = Abbe Number d = 32 e = 32 Density 1.37 g.cm -3 UV Protection (ISO) Activated: 2.0mm Centre Thickness. UVA: 100 %, UVB: 100 % Coating Type Hard Coated For External Distribution 2013 Carl Zeiss Vision Inc. MR-10 is a trademark of Mitsui Chemicals Inc. Transitions is a registered trademark of Transitions Optical Inc. 6 of 23

8 Reference : FS1 Date : 16 December 2013 Page : 2 of 3 Blank Information: Base True Front (1.530) Radii Back Curve Centre Thickness (± 1.0mm) Edge Thickness at A Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre to 1.5 Minimum Edge -1. to or * 1.0 * +1. to to * Thicknesses are based on whichever is the limiting factor. 7 of 23

9 Reference : FS1 Date : 16 December 2013 Page : 3 of 3 Product Markings: Recommended Range Chart: Front Surface: Top Code Only MINUS CYLS Ink Markings: Back Surface Coding: S P H E R E S PLANO Extended Range 1. base Recommended of 23

10 Substrate : POLYCARBONATE Product Name : SOLAOne PROGRESSIVE Product Type : SEMI-FINISHED BLANKS Reference : FS5 Date : 21 December 2011 Page : 1 of 2 Product Range: Product: CAT Code: Coated PG G36 Coated UT 270 Diameter Base Add Power Range Recommended Rx Range to to to to to to to to to to Material & Coating Specifications: Type Polycarbonate Refractive Index n d = n e = Abbe Number ν d = 30 ν e = 29 Density 1.20 g.cm -3 UV Protection (ISO) Coated : 2.0 mm Centre Thickness UVA : 100 % UVB : 100 % Coating Type Perma-Gard and Ultra-Tough Blank Information: (As measured in R.I) Base True Front (1.530) Radii Back Curve Centre Thickness ± 1.0 Edge Thickness * Packaged Weight (g) * Measured at the distance edge of the blank. For External Distribution The eye logo, SOLA, SOLAOne, Perma-Gard and Ultra-Tough are trademarks of Carl Zeiss Vision Inc. 9 of 23

11 Reference : FS5 Date : 21 December 2011 Page : 2 of 2 Product Markings: Front Surface: Semi-Visible Markings Front Surface: Ink Markings Back Surface Markings: Surfacing: Recommended Centre & Edge Thicknesses (*- based on whichever is the limiting factor) Power Range Minimum Centre to 1.5 Minimum Edge -1. to * 1.5* +2. to to Recommended Range Chart: SPHERE SOLAOne Polycarbonate (Minus cyl convention) PLANO SPHERE 10 of 23

12 PRODUCT FACT SHEET Substrate : POLYCARBONATE PhotoFusion Product Name : SOLAOne TM PROGRESSIVE Product Type : SEMI-FINISHED BLANKS Reference : FS3 Date : 22 March 2012 Page : 1 of 2 Product Range: Colour: Brown Grey CAT Code: F38 F37 Diameter Base Add Power Range Recommended Rx Range to to to to to to to to to to Material & Coating Specifications: Type Polycarbonate Refractive Index n d = (Helium 'd' line nm), n e = (Mercury 'e' line nm) Abbe Number ν d = 30, ν e = 29 Density 1.20 g.cm -3 UV Protection (ISO) 100% UVA and 100% UVB Coated, Activated : 2.0mm Centre Thickness Coating Hard Coated Blank Information: (As measured in R.I) Base True Front (1.530) Radii Back Curve Centre Thickness (± 1.0mm) For External Distribution Edge Thickness * Packaged Weight (g) * Measured at the distance edge of the blank Carl Zeiss Vision International GmbH. PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH SOLAOne is a trademark of Carl Zeiss Vision Inc. 11 of 23

13 Reference : FS3 Date : 22 March 2012 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre to 1.5 Minimum Edge -1. to * 1.5* +2. to to *Thicknesses are based on whichever is the limiting factor. Product Markings: Front Surface: Semi-Visible Markings Recommended Range Chart: SPHERE (Minus cyl convention) Front Surface: Ink Markings PLANO Back Surface Markings SPHERE 12 of 23

Substrate : POLYCARBONATE Product Name : NUPOLAR POLARISED SOLAOne PROGRESSIVE Product Type : SEMI-FINISHED BLANKS Cat Codes: Gray-807 Brown-946 Reference : 00082.

14 Substrate : POLYCARBONATE Product Name : NUPOLAR POLARISED SOLAOne PROGRESSIVE Product Type : SEMI-FINISHED BLANKS Cat Codes: Gray-807 Brown-946 Reference : FS1 Date : 21 Aug 2008 Page : 1 of 2 Product Range: Product available in Grey and Brown Diameter Base Add Power Range Rx Range Recommended 76 mm to to mm to to 76 mm to to mm to to mm to to Material & Coating Specifications: Type Polycarbonate Polarised Gray 3 & Polarised Brown Refractive Index η d = η e = Abbe Number ν d = 30 ν e = 29 Density 1.20 g.cm -3 UV Protection (ISO) UVA : 100 % UVB : 100 % (Coated : 2.0 mm Centre Thickness) (ISO , ANSI Z ) Coating Type Ultra-Tough Blank Information: Base True Front (1.530) Radii mm Back Centre Thickness Edge Thickness at A Packaged Weight (g) ± ± ± ± ± * Measured at the distance edge of the blank. For External Distribution The eye logo, SOLA, Ultra-Tough, and SOLAOne are trademarks of Carl Zeiss Vision Inc. NuPolar is a registered trademark of Younger Optics Inc. 13 of 23

15 Reference : FS1 Date : 21 Aug 2008 Page : 2 of 2 Product Markings: Front Surface: RE Semi-Visible Markings Front Surface: RE Ink Markings (Yellow, solvent based) Surfacing: Recommended Centre & Edge Thicknesses (based on whichever is the limiting factor) Power Range Minimum Centre Minimum Edge All powers MINUS CYLS S P H E R E S PLANO of 23

16 PRODUCT FACT SHEET Substrate : POLYCARBONATE TRANSITIONS SIGNATURE VII Product Name : SOLAOne PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : FS1 Date : 17 December 2013 Page : 1 of 2 Product Range: Product: LGC: Cat Code: Gray HC L6423 V77 Diameter Base Add Power Range Recommended Rx Range to to to to to to to to to to Material & Coating Specifications: Type Polycarbonate Refractive Index n d = n e = Abbe Number d = 30 e = 29 Density 1.20 g.cm -3 UV Protection (ISO) UVA: 100% UVB: 100% Coating Type Hard Coated Blank Information: Base True Front (1.530) Radii Back Centre Thickness (±1.0mm) Edge Thickness at A For External Distribution 2013 Carl Zeiss Vision Inc. Transitions is a registered trademark of Transitions Optical Inc. 15 of 23

17 Reference : FS1 Date : 17 December 2013 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre to 1.5 Minimum Edge -1. to or * 1.0 * +2. to to * Thicknesses are based on whichever is the limiting factor. Product Markings: Front Surface: Top Code Only Recommended Range Chart: Minus Cylinder Convention Ink Markings: Back Surface Coding: S P H E R E S Plano of 23

18 Substrate : HARD RESIN Product Name : SOLAOne PROGRESSIVE Product Type : SEMI-FINISHED BLANKS Cat Codes: HC-2 Unc-3 Reference : F _2 Date : 10 May 2005 Page : 1 of 2 Product Range : Diameter Base Add Power Range Rx Range Recommended 80 mm to to mm to to 80 mm to to mm to to mm to to Material & Coating Specifications: Type CR39 Refractive Index η d = η e = 1.0 Abbe Number ν d = 58 ν e = 56 Density 1.32 g.cm -3 UV Protection (ISO) 2.0 mm Centre Thickness UVA : 91 %, UVB : 100 % Coating Type Ultra-Tough (Uncoated product also available) Blank Information : Base True Front (1.530) True Front (1.499) Radius mm Back (1.530) Centre Thicknes s (±1mm) Edge Thickness * Packaged Weight (g) * Measured at the distance edge of the blank. For External Distribution The eye logo, SOLA, Ultra-Tough, and SOLAOne are trademarks of SOLA International Inc. 17 of 23

19 Reference : F _2 Date : 10 May 2005 Page : 2 of 2 Front Surface : Semi-Visible Markings Front Surface : Ink Markings (Yellow, water based : Uncoated) (Yellow, solvent based : Coated) Back Surface : Coding VRH4+200L AF23 20H Surfacing : Recommended Centre & Edge Thicknesses. (* - Based on whichever is limiting factor) Power Range USA Market Minimum Centre Int l Market Minimum Centre to D All Markets Minimum Edge -1. to D 2.0 or * 2.0 or * 1.0 * +2. to D 1.0 MINUS CYLS S P H E R E S PLANO of 23

20 PRODUCT FACT SHEET Substrate : 1. PhotoFusion Product Name : SOLAOne Product Type : SEMI-FINISHED PROGRESSIVE BLANKS Reference : FS1 Date : 21 Mar 2012 Page : 1 of 2 Product Range: Grey Brown CAT Code F35 F36 Diameter Base Add Power Range Recommended Rx Range to to to to to to to to to to Material & Coating Specifications: Type Refractive Index 1.5 PhotoFusion n d = 1.2 (Helium d line nm) n e = 1.4 (Mercury e line nm) Abbe Number ν d = 54,ν e = 52 Density 1.18 g.cm -3 Luminous Transmittance (clear state) 87% UV Protection (ISO) Coated, Activated : 2.0mm Centre Thickness : UVA : 100% UVB : 100% Coating Type Hardcoated Blank Information: (As measured in R.I) Base True Front Curve (1.530) Radii Back Curve Centre Thickness (± 1.0mm) Edge Thickness at A For External Distribution 2012 Carl Zeiss Vision International GmbH. PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH. SOLAOne is a trademark of Carl Zeiss Vision Inc. 19 of 23

21 Reference : FS1 Date : 21 Mar 2012 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range USA Market Minimum Centre Int l Market Minimum Centre to All Markets Minimum Edge -1. to or * 2.0 or * 1.0 * +2. to to *Thicknesses are based on whichever is the limiting factor. Product Markings: Front Surface: Semi-Visible Markings Recommended Range Chart: SPHERE (Minus cyl convention) Front Surface: Ink Markings PLANO 3. Back Surface Markings SPHERE 20 of 23

PRODUCT FACT SHEET Substrate : 1.5 TRANSITIONS SIGNATURE VII Product Name : SOLAOne PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : 00407.

22 PRODUCT FACT SHEET Substrate : 1.5 TRANSITIONS SIGNATURE VII Product Name : SOLAOne PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : FS1 Date : 29 November 2013 Page : 1 of 3 Product Range: Product: Gray HC Brown HC LGC: L6430 L6422 Cat Code: V74 V73 Diameter Base Add Power Range Recommended Rx Range to to to to to to to to to to Material & Coating Specifications: Type CR-607 Refractive Index n d = n e = Abbe Number d = 61 e = 57 Density 1.27 g.cm -3 UV Protection (ISO) Activated: 2.0mm Centre Thickness. UVA: 100 %, UVB: 100 % Coating Type Hard Coated For External Distribution 2013 Carl Zeiss Vision Inc. CR-607 is a registered trademark of PPG Industries Inc. Transitions is a registered trademark of Transitions Optical Inc. 21 of 23

23 Reference : FS1 Date : 29 November 2013 Page : 2 of 3 Blank Information: Base True Front (1.530) Radii Back Centre Thickness (±1.0mm) Edge Thickness at A Surfacing: Recommended centre & edge thicknesses for all regions: Power Range USA Market Minimum Centre Int l Market Minimum Centre to All Markets Minimum Edge -1. to or * 2.0 or * 1.0 * +2. to to * Thicknesses are based on whichever is the limiting factor. 22 of 23

24 Reference : FS1 Date : 29 November 2013 Page : 3 of 3 Product Markings: Front Surface: Top Code Only Recommended Range Chart: Minus Cylinder Convention Ink Markings: Back Surface Coding: S P H E R E S Plano of 23

Grau 1214 D Values marked with do not apply to the type of glass or no values are available.

Grau 1214 D Values marked with do not apply to the type of glass or no values are available. Grau 1214 Colour: Application: grey Dark tinted sunglare filter with with IR- and high UV- absorption filter category 3 acc. to DIN EN 1836 The subsequent properties are based primarily upon the measuring