SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Transcription

1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LUXOTTICA QUALITY PERFORMANCE LABORATORY - OAKLEY Oakley Inc., One Icon Foothill Ranch, CA Dr. Jane Wang Phone: MECHANICAL Valid To: May 31, 2019 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on eyewear and goggles: Mil PRF Mil PRF Chemical Resistance Ballistic Resistance Luminous Transmittance/Neutrality/Chromaticity Abrasion Resistance Prismatic Power Optical Distortion U.V. Absorption Temperature Solar Radiation Humidity Adhesion Salt Water Flammability Ballistic Resistance Prismatic Power Refractive Power Optical Distortion Astigmatism UV Absorption Transmittance (Class 1, 3, 4) Luminous Transmittance (Class 2) Neutrality (Class 2) Chromaticity (Class 2) Haze (A2LA Cert. No ) 05/30/2017 Page 1 of 4

2 Mil PRF Chemical Resistance Temperature Solar Radiation Humidity Mil DTL 43511D Ballistic Resistance ANSI Z87.1 ISO ISO Optical Quality Test 9.2 Transmittance Test 9.3 Haze Test 9.4 Refractive Power, Astigmatism, and Resolving Power Test (2010 and 2015 version)* 9.5 Prismatic Power Test 9.6 Drop Ball Test 9.7 Ignition Test 9.8 Corrosion Resistance Test 9.10 Lateral Protection Test 9.11 High Mass Impact Test 9.12 High Velocity Impact Test 9.13 Penetration Test 4.4 Dimensional Tolerances on Nominal Size 8.2 Dimensional Stability at Elevated Temperature 8.3 Resistance to Perspiration 8.4 Bridge Deformation and Lens Retention 8.5 Endurance 8.6 Resistance to Ignition 8.7 Resistance to Optical Degradation 6.2 Filter Material and Surface Quality 7.1 Measurement of Spectral Transmittance 7.2 Uniformity of Luminous Transmittance 7.3 UV-Transmittance 7.8 Relative Visual Attenuation Quotient for Signal Light Detection 7.9 Wide Angle Scattering Plane of Transmission Polarizing Efficiency 8.1 Spherical, Astigmatic and Prismatic Refractive Powers 8.2 Prism Imbalance 9.3 Impact Resistance (Strength Level 1) (Drop Ball) (A2LA Cert. No ) 05/30/2017 Page 2 of 4

3 ISO Impact Resistance (Strength Level 2) (Drop Ball) 9.5 Impact Resistance (Strength Level 3) (High Velocity) 9.6 Frame Deformation and Filter Retention 9.7 Increased Endurance of Sunglasses 9.8 Resistance to Solar Radiation 9.9 Resistance to Ignition 9.10 Resistance to Perspiration ISO Coverage AS/NZ AS/NZ ANSI Z Filter Material and Surface Quality 7.1 Measurement of Spectral Transmittance 7.2 Uniformity of Luminous Transmittance 7.3 UV-Transmittance 7.8 Relative Visual Attenuation Quotient for Signal Light Detection 7.9 Wide Angle Scattering Plane of Transmission Polarizing Efficiency 8.1 Spherical, Astigmatic, and Prismatic Refractive Powers 8.2 Prism Imbalance 9.3 Impact Resistance (Strength Level 1) (Drop Ball) 9.4 Impact Resistance (Strength Level 2) (Drop Ball) 9.5 Impact Resistance (Strength Level 3) (High Velocity) 9.6 Frame Deformation and Filter Retention 9.7 Increased Endurance of Sunglasses 9.8 Resistance to Solar Radiation 9.9 Resistance to Ignition 9.10 Resistance to Perspiration 11.1 Coverage Uniform Tint Lens 4.12 Tint Imbalance Between Lenses 4.13 Axis of Polarization 5.1 Impact Resistance Test 5.3 Ignition Test 5.4 Corrosion Resistance (A2LA Cert. No ) 05/30/2017 Page 3 of 4

4 ANSI Z Refractive Properties Test (Refractive, Astigmatic, and Prismatic Powers) Luminous Transmittance Test Transmittance Properties Related to Traffic Signal Recognition Ultraviolet Mean Transmittance 5.9 Resistance to Radiation Test *This laboratory s scope contains withdrawn or superseded methods. As a clarifier, this indicates that the applicable method itself has been withdrawn or is now considered historical and not that the laboratory s accreditation for the method has been withdrawn. The laboratory is only accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed below. The inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications nor does it confer accreditation for the method(s) embedded within the specifications. ISO Eye and Face Protection Sunglasses and Related Eyewear Sunglasses for General Use ISO Eye and Face Protection Sunglasses and Related Eyewear Filters for Direct Observation of the Sun AS/NZ Eye and Face Protection Sunglasses and Fashion Spectacles (A2LA Cert. No ) 05/30/2017 Page 4 of 4

5 Accredited Laboratory A2LA has accredited LUXOTTICA QUALITY PERFORMANCE LABORATORY - OAKLEY Foothill Ranch, CA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 30 th day of May President and CEO For the Accreditation Council Certificate Number Valid to May 31, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.