Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 3 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7113-1A, -2A and PS7113L-1A, -2A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7113L-1A, -2A have a surface mount type lead. FEATURES 1 channel type (1 a output) or 2 channel type (1 a + 1 a output) Low LED operating current (IF = 2 ma) Designed for AC/DC switching line changer Small package (6, 8-pin DIP) Low offset voltage PS7113L-1A, -2A: Surface mount type UL approved: File No. E72422 (S) BSI approved: No. 824/8246 CSA approved: No. CA 11391 APPLICATIONS Exchange equipment Measurement equipment FA/OA equipment Document No. PN1269EJ1V1DS (1st edition) (Previous No. P113EJ6VDS) Date Published February 23 CP(K) The mark shows major revised points.
PACKAGE DIMENSIONS (in millimeters) PS7113-1A PS7113L-1A 9.2±. TOP VIEW 6 4 9.2±. TOP VIEW 6 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain. MOS FET Source 6. MOS FET Drain 7.62 6.±. 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain. MOS FET Source 6. MOS FET Drain 6.±. 3.3±.3 4.1±.3 3.±.3 3.±.3.1 +.1..±.1 1.34±.1.2 M 2.4 to 1 1.34±.1.2 M 2.4.9±.2 9.6±.4 PS7113-2A PS7113L-2A 9.2±. TOP VIEW 8 7 6 9.2±. TOP VIEW 8 7 6 1 2 3 4 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode. MOS FET 6. MOS FET 7. MOS FET 8. MOS FET 1 2 3 4 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode. MOS FET 6. MOS FET 7. MOS FET 8. MOS FET 7.62 6.±. 6.±. 4.1±.3 3.±.3 3.±.3 3.3±.3.1 +.1..±.1 1.34±.1.2 M 2.4 to 1 1.34±.1.2 M 2.4.9±.2 9.6±.4 2 Data Sheet PN1269EJ1V1DS
ORDERING INFORMATION (Solder Contains Lead) Part Number Package Packing Style Application Part Number *1 PS7113-1A 6-pin DIP Magazine case pcs PS7113-1A PS7113L-1A PS7113L-1A PS7113L-1A-E3 Embossed Tape 1 pcs/reel PS7113L-1A-E4 PS7113-2A 8-pin DIP Magazine case pcs PS7113-2A PS7113L-2A PS7113L-2A PS7113L-2A-E3 Embossed Tape 1 pcs/reel PS7113L-2A-E4 *1 For the application of the Safety Standard, following part number should be used ORDERING INFORMATION (Pb-Free) Part Number Package Packing Style Application Part Number *1 PS7113-1A-A 6-pin DIP Magazine case pcs PS7113-1A PS7113L-1A-A PS7113L-1A PS7113L-1A-E3-A Embossed Tape 1 pcs/reel PS7113L-1A-E4-A PS7113-2A-A 8-pin DIP Magazine case pcs PS7113-2A PS7113L-2A-A PS7113L-2A PS7113L-2A-E3-A Embossed Tape 1 pcs/reel PS7113L-2A-E4-A *1 For the application of the Safety Standard, following part number should be used.. Data Sheet PN1269EJ1V1DS 3
ABSOLUTE MAXIMUM RATINGS (TA = 2 C, unless otherwise specified) Ratings Parameter Symbol PS7113-1A, PS7113L-1A PS7113-2A, PS7113L-2A Unit Diode Forward Current (DC) IF ma Reverse Voltage VR. V Power Dissipation PD mw/ch Peak Forward Current *1 IFP 1 A MOS FET Break Down Voltage VL 1 V Continuous Connection A IL 3 ma Load Current *2 Connection B 4 Connection C 7 Pulse Load Current *3 (AC/DC Connection) ILP 6 ma Power Dissipation PD 6 37 mw/ch Isolation Voltage *4 BV 1 Vr.m.s. Total Power Dissipation PT 61 8 mw Operating Ambient Temperature TA 4 to +8 C Storage Temperature Tstg 4 to +1 C *1 PW = 1 µs, Duty Cycle = 1 % *2 Conditions: IF 2 ma. The following types of load connections are available. Connection A Connection B Connection C 6 1 2 3 4 6 1 2 3 4 1 6 2 3 4 1 2 3 6 4 IL IL IL IL IL L L L L IL + IL + + + VL (AC/DC) VL (DC) VL (DC) VL (DC) *3 PW = 1 ms, 1 shot *4 AC voltage for 1 minute at TA = 2 C, RH = 6 % between input and output 4 Data Sheet PN1269EJ1V1DS
RECOMMENDED OPERATING CONDITIONS (TA = 2 C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 1 2 ma LED Off Voltage VF. V ELECTRICAL CHARACTERISTICS (TA = 2 C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF IF = 1 ma 1.2 1.4 V Reverse Current IR VR = V. µa MOS FET Off-state Leakage Current ILoff VD = 1 V.3 1. µa Output Capacitance Cout VD = V, f = 1 MHz 2 pf/ch Coupled LED On-state Current IFon IL = 3 ma 2. ma On-state Resistance Ron1 IF = 1 ma, IL = 1 ma.9 2. Ω Ron2 IF = 1 ma, IL = 3 ma, t 1 ms Turn-on Time *1 ton IF = 1 ma,, RL = Ω, 1.3 3. ms Turn-off Time *1 toff PW 1 ms.6.2 Isolation Resistance RI-O VI-O = 1. kvdc 1 9 Ω Isolation Capacitance CI-O V = V, f = 1 MHz 1.1 pf/ch *1 Test Circuit for Switching Time Pulse Input IF VL Input % Input monitor VO monitor 9 % Output Rin RL 1 % ton toff Data Sheet PN1269EJ1V1DS
TYPICAL CHARACTERISTICS (TA = 2 C, unless otherwise specified) 1 MAXIMUM FORWARD CURRENT vs. MAXIMUM LOAD CURRENT vs. Maximum Forward Current IF (ma) 8 6 4 2 Maximum Load Current IL (ma) 4 3 2 1 2 2 7 8 1 2 2 7 8 1 1.6 FORWARD VOLTAGE vs. 2 OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Forward Voltage VF (V) 1.4 1.2 1. IF = ma 3 ma 2 ma 1 ma ma 1 ma Output Capacitance Cout (pf) 2 1 1.8 2 2 7 1 2 4 6 8 1 12 Applied Voltage VD (V) Off-state Leakage Current ILoff (A) 1 3 1 4 1 1 6 1 7 1 8 1 9 OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 2 4 6 TA = 8 C 8 Applied Voltage VD (V) 2 C 1 12 Load Current IL (ma) LOAD CURRENT vs. LOAD VOLTAGE 4 2.4.2.2.4 2 4 Load Voltage VL (V) IF = 1 ma 6 Data Sheet PN1269EJ1V1DS
Normalized On-state Resistance Ron NORMALIZED ON-STATE RESISTANCE vs. 3. 2. 2. 1. 1.. Normalized to 1. at TA = 2 C, IF = 1 ma, IL = 1 ma. 2 2 7 1 Number (pcs) ON-STATE RESISTANCE DISTRIBUTION 3 2 2 1 1 On-state Resistance Ron (Ω) n = pcs, IF = 1 ma, IL = 1 ma.8.9 1. TURN-ON TIME vs. FORWARD CURRENT 3 2 TURN-OFF TIME vs. FORWARD CURRENT.3.2 Turn-on Time ton (ms) 2 1 1 Turn-off Time toff (ms).2.1.1. 1 1 2 2 3 3 4 1 1 2 2 3 3 4 Forward Current IF (ma) Forward Current IF (ma) 3 2 TURN-ON TIME DISTRIBUTION n = pcs, IF = 1 ma, 3 2 TURN-OFF TIME DISTRIBUTION n = pcs, IF = 1 ma, Number (pcs) 2 1 1 Number (pcs) 2 1 1 1. 1.1 1.2 1.3 1.4 1. 1.6.2.4.8.1 Turn-on Time ton (ms) Turn-off Time toff (ms) Data Sheet PN1269EJ1V1DS 7
Normalized Turn-on Time ton 3. 2. 2. 1. 1.. NORMALIZED TURN-ON TIME vs. Normalized to 1. at TA = 2 C, IF = 1 ma, Normalized Turn-off Time toff 3. 2. 2. 1. 1.. NORMALIZED TURN-OFF TIME vs. Normalized to 1. at TA = 2 C, IF = 1 ma,. 2 2 7 1. 2 2 7 1 Remark The graphs indicate nominal characteristics. 8 Data Sheet PN1269EJ1V1DS
TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.±.1 4.±.1 1. +.1 1.7±.1 4. MAX. 7.±.1 16.±.3 1.3±.1 1.±.1 1.4±.1 4.±.1 12.±.1.3 Tape Direction PS7113L-1A-E3 PS7113L-2A-E3 PS7113L-1A-E4 PS7113L-2A-E4 Outline and Dimensions (Reel) 2.±. 2.±. 13.±.2 R 1. 21.±.8 33±2. 1±1. 17.±1. 21.±1. Packing: 1 pcs/reel 1.9 to 19.4 Outer edge of flange Data Sheet PN1269EJ1V1DS 9
RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering Peak reflow temperature Time of peak reflow temperature Time of temperature higher than 22 C Time to preheat temperature from 12 to 18 C Number of reflows Flux 26 C or below (package surface temperature) 1 seconds or less 6 seconds or less 12±3 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T ( C) 12 C 12±3 s (preheating) 18 C (heating) to 1 s to 6 s 26 C MAX. 22 C Time (s) (2) Wave soldering Temperature Time Preheating conditions Number of times Flux 26 C or below (molten solder temperature) 1 seconds or less 12 C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of.2 Wt% is recommended.) (3) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 1 Data Sheet PN1269EJ1V1DS
49 Patrick Henry Drive Santa Clara, CA 94-1817 Telephone: (48) 919-2 Facsimile: (48) 988-279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 22/9/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 23/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix A indicates that the device is Pb-free. The AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Concentration Limit per RoHS (values are not yet fixed) < 1 PPM Concentration contained in CEL devices -A -AZ Not Detected (*) Mercury < 1 PPM Not Detected Cadmium < 1 PPM Not Detected Hexavalent Chromium < 1 PPM Not Detected PBB < 1 PPM Not Detected PBDE < 1 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.