technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of 0 C (the Standard requires C), thus offering the market suitably oversized products The busbar casing is made from hot-dipped galvanised sheet steel and forms a high strength outer structure, which also serves as the protective conductor (PE) for the MR version. The individual conductors are made from either electrolytic copper or electro tin-plated aluminium. The standard MR trunking is supplied with four equal size conductors (TP and N +PE) whereas the optional conductor version includes an additional integral 00% earth bar (TP and N +E) The degree of protection is IP as standard, however the complete system can be upgraded to IP with the appropriate accessories. The normal recommended fixing centres for the MR range is 0 m The jointing of MR lengths is done by overlapping two lengths and fastening the special locating screws. The 'monobloc' joint is then tightened by a double headed shear bolt to complete the electrical connection. joint cover is then positioned to complete the joint Trunking lengths - m The components and the features of the MR straight lengths are : a casing made of Senzimir quality galvanised steel used as protective earth (PE) overall dimensions : to x mm painted casing available on request (contact us on + (0) 00 ) number of conductors : with the same section (P + N) with PE made from the casing or when using MR full (P + N + PE), available in the aluminum or electrolytic copper version with.% purity conductors insulators are made of fiberglass reinforced plastic material, ensuring a V self-extinguishing degree (according to UL ), in compliance with the glow-wire test according to IEC 0--0 tap-off outlets with a constant centre distance of m on both sides of the busbar ( + outlets every m), set up for being connected to plug-in type tap-off boxes. These outlets open and close automatically when inserting or pulling out a tap-off box monobloc electric junction system made with a silver coated copper plate system to connect conductors and PE in a fast and reliable way. The monobloc has shear-head bolts with a preset torque setting which ensure good, long-lasting electrical continuity ll components and accessories in the MR range are IP when the plug outlet covers are installed on the straight elements. Without plug outlet covers there is an IP for edgeways installations, or IP 0 with a flat installation (outlets facing up) The whole busbar is flame retardant in compliance with the IEC 0- standard Trunking length - m without outlets 0 0 0- l 0-00 Cu 0 00-00 l 0-000 Cu 000 0 Tap-off outlet cover - IP Trunking lengths - 0 to mm with + outlets Trunking lengths - 0 to mm without outlets 0 L (PE) () L N L pe 0- l 0-00 Cu () only on conductor 0- l 0-00 Cu 000 000 IP 0 0- l 0-00 Cu 0 0 0 00-00 l 0-000 Cu Trunking lengths - m with outlets on one side only 00 00 00 00 Trunking lengths - 000 to 00 mm with + outlets ll dimensions (mm) are nominal
_P_D00 v.qxd //0 :0 Page 0 MR medium rating busbar technical information (continued) Double elbows Standard dimensions (00 + 00 + 00 mm) 0 as standard. Other angles available on request. IP quick connection 0 Trunking lengths - 00 to 00 mm without outlets espoke dimensions Measure from the long casing to the axis of the elbow 0 Double horizontal elbow Right + left Left + right 0 00 00 (C) () (C) () () 0 0- l 0-00 Cu 00-00 l 0-000 Cu espoke dimensions (mm) 0 Double vertical elbow Right + left Left + right 00 () Trunking lengths with S0 fire barrier,, C 0- l 0-00 Cu 00-00 l 0-000 Cu 0 00 espoke dimensions (mm) 0 Single elbows - standard dimensions (00 + 00 mm),, C Vertical + horizontal elbows + + () () 0 as standard. Other angles available on request. IP quick connection Horizontal elbow 00 00 + + (C) Vertical elbow 00 00 espoke dimensions (mm) 00 Horizontal + vertical elbows + + + + () () espoke dimensions Measure from the long casing to the axis of the elbow (see measuring bespoke dimensions p. ),, C Special horizontal elbow espoke dimensions (mm) 0 0 (C) Special vertical elbow espoke dimensions (mm) 00 00 espoke dimensions (mm) ll dimensions (mm) are nominal 0 00,, C
_P_D00 v.qxd //0 : Page Horizontal tee Metal end feed units Standard dimensions (00 + 00 + 00 mm) 00 00 0 00 0 0 Left hand - male tee Left hand - female tee espoke dimensions 0 0 0 0 0 Right hand - female tee 00 During shipment the stump is positioned in the box to reduce its bulk Take it out and screw it in the position illustrated here Opening on the base cable entry : 0 x 0 mm. For plates and holes dimensions, see p. for the switchboard feed unit with the same rating Right hand - male tee End feed unit with C switch disconnector () () (C) Dimensions (mm) espoke dimensions (mm) 0,, C 0 00 0 0 C 0 00 D 00 00 D C 0 Crossover - standard dimensions (00 + 00 + 00 + 00 mm) Cable entry dimensions (mm) 0 x 0 0 x 0 00 00 00 down up down 00 up End feed units Cable connection : max. sect. ( x 0 mm + x 0 mm) or x 0 mm, max PG 00 00 0 0 00 0 0 00 0 00 Centre feed units 0 0 00 Cable entry ll dimensions (mm) are nominal
technical information (continued) End stop Ensures IP protection at the end of the run (EN 0) In-line bus switch D 0 Switchboard-transformer feed units 0 0 0 C 0 0 0 0 Ø Type Type Ø 0 0 0 0 0 Ø Dimensions (mm) Type Type 0 00 0 0 0 C 00 00 D 0 Dimensions (mm) l Cu Type 0 0 0 00 Type 00 0 00 00 0 000 00 ll dimensions (mm) are nominal
Tap-off boxes Type Type 0 0 00 0 00 00 00 0 00 0 Type - 0 00 0 0 0 0 0 0 00 00 00 0 0 Type 00-0 Type Type 0 0 Type Type - 0 Type 0 00-000 Type 0-00 ll dimensions (mm) are nominal
_P_D00 v.qxd //0 0: Page MR medium rating busbar mounting tap-offs Trunking length with outlets Rising main Edgeways 0 Numbers in squares refer to the tap-off box type 0 Rising main Trunking length with outlets Edgeways 0 non-usable Numbers in squares refer to the tap-off box type non-usable 0 Note : in lengths with outlets, using an outlet excludes the use of the next one
technical information Suspension brackets eam fixing bracket 0 0 0 Ø x 0 0 0 0 C Triple cable channel Wall fixing bracket x 0 / 0 / 0 Measuring bespoke dimensions Straight lengths lways measure from the long side of the casing as illustrated. Ceiling fixing bracket kit Elbows Measure from the long casing to the axis of the elbow. 00 0 0 0 x 0 sole x 0 0 00 0 0 00 / 000 / 000 Ø 00 Ø 0 - C Cat. Nos. 000 000 C 00 0 0 L ll dimensions (mm) are nominal
how to design the system MR medium rating busbar how to create codes for S/MR adaptors Use end feed unit - left hand This gives the neutral bar positioning on the right of elements and the tap-off box with cable entry at the base 00 0 00 00 0 Use the vertical hanger for rising main as a function of the run weight For vertical lengths less than metres fit on the base of the busbar a vertical bracket Cat. No. 00; for longer lengths use vertical suspension hanger (type Cat. No. 00) every 00 kg of rising main L PE L N L 0 0 MR Use standard suspension brackets with spacer 0 mm every m of the rising main L PE L N L S Left hand Use straight lengths with plug outlets on one side Use the straight length with fire barrier to maintain the fire resistance of the floor Please specify the position of the internal fire barrier before placing an order (see p. 0) The tap-off box can be installed on the joint between the elements or on the outlets t the end of the rising main use the end cover IP efore mounting the end cover remove the monobloc prefitted on the last element of rising main L PE L N L S Conductors Right hand 0 0 0 Insert the plug outlet covers to guarantee the degree of protection IP to the run 0 luminium Copper Case 0 Galvanised Full galvanised Painted Full painted Type Right Left Rating 0 0 00 0 00 000 00 Example code 000 means luminium Galvanised Type 00 0 means Copper Full galvanised Type 0
technical data - aluminium Complies to : IEC - and, S EN 0 part and, DIN VDE 00 part 00 and 0 Suitable for the following climates : Constant humid climate (DIN IEC and - ) Cyclical humid climate (DIN IEC and - 0) L+N+PE (luminium) Rated current Operational voltage Insulation voltage Frequency Rated shortcircuit current withstand for -phase fault ( s) Specific Energy withstand for -phase fault Peak current Rated short-time current for single-phase fault Ph-N( s) Peak current for single-phase fault Ph-N Rated short-time current single-phase fault Ph-PE ( s) Peak current single-phase fault Ph-PE Phase resistance at 0 C Phase resistance at thermal conditions (In; 0 C) Phase reactance (0 Hz) Neutral resistance at 0 C Neutral reactance (0 Hz) Resistance of the protective bar Reactance of the protective bar (0 Hz) Resistance of the phase-pe fault loop Reactance of the phase-pe fault loop (0 Hz) Resistance of the phase-neutral fault loop Reactance of the phase-neutral fault loop (0 Hz) Voltage k drop coeff. with Voltage k drop coeff. with distribuited load (k) distributed load (k) Losses for the Joule effect at nominal current Fire load Weight Overall dimensions of the busbar Degree of protection (CEI EN0) IK code CEI EN00-- In () Ue (V) Ui (V) ƒ (Hz) Icw (k)rms I (M s) Ipk (k) Icw (k)rms Ipk (k) Icw (k)rms Ipk (k) R 0 (mω/m) R (mω/m) X (mω/m) Rn0 (mω/m) Xn (mω/m) RPE (mω/m) XPE (mω/m) RPh-Pe fault loop (mω/m) XRPh-Pe fault loop (mω/m) RPh-N fault loop (mω/m) XRPh-N fault loop (mω/m) ΔΔv (V/m/)0 - cosϕ = 0 0 ΔΔv (V/m/)0 - cosϕ = 0 ΔΔv (V/m/)0 - cosϕ = 0 0 ΔΔv (V/m/)0 - cosϕ = 0 ΔΔv (V/m/)0 - cosϕ = 0 0 ΔΔv (V/m/)0 - cosϕ = 0 ΔΔv (V/m/)0 - cosϕ = 0 00 P (W/m) (kwh/m) p (kg/m) L x H (mm) IP IK 0 0 00 00 0 00 000 000 000 000 000 000 000 000 000 000 000 000 000 000 0/0 0/0 0/0 0/0 0/0 0/0 0/0 () () () 0 00 0 () () () 0 0 0 a () () () 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 00 0 00 0 x x x x x x x - - - - - - - 0 0 0 0 0 0 0 () Values for 0 s Temperature rating schedule Mean room temperature ( C) 0 0 0 0 0 K factor 0 0 0 0 0 0 0 Multiplier coefficient of nominal rating for room temperature values different from 0 C
technical data - copper Complies to : IEC - and, S EN 0 part and, DIN VDE 00 part 00 and 0 Suitable for the following climates : Constant humid climate (DIN IEC and - ) Cyclical humid climate (DIN IEC and - 0) L+N+PE (Copper) Rated current Operational voltage Insulation voltage Frequency Rated shortcircuit current withstand for -phase fault ( s) Specific Energy withstand for -phase fault Peak current Rated short-time current for single-phase fault Ph-N( s) Peak current for single-phase fault Ph-N Rated short-time current single-phase fault Ph-PE ( s) Peak current single-phase fault Ph-PE Phase resistance at 0 C Phase resistance at thermal conditions (In; 0 C) Phase reactance (0 Hz) Neutral resistance at 0 C Neutral reactance (0 Hz) Resistance of the protective bar Reactance of the protective bar (0 Hz) Resistance of the phase-pe fault loop Reactance of the phase-pe fault loop (0 Hz) Resistance of the phase-neutral fault loop Reactance of the phase-neutral fault loop (0 Hz) Voltage k drop coeff. with Voltage k drop coeff. with distribuited load (k) distributed load (k) Losses for the Joule effect at nominal current Fire load Weight Overall dimensions of the busbar Degree of protection (CEI EN0) IK code CEI EN00-- In () Ue (V) Ui (V) ƒ (Hz) Icw (k)rms I (M s) Ipk (k) Icw (k)rms Ipk (k) Icw (k)rms Ipk (k) R 0 (mω/m) R (mω/m) X (mω/m) Rn0 (mω/m) Xn (mω/m) RPE (mω/m) XPE (mω/m) RPh-Pe fault loop (mω/m) XRPh-Pe fault loop (mω/m) RPh-N fault loop (mω/m) XRPh-N fault loop (mω/m) ΔΔv (V/m/)0 - cosϕ = 0 0 ΔΔv (V/m/)0 - cosϕ = 0 ΔΔv (V/m/)0 - cosϕ = 0 0 ΔΔv (V/m/)0 - cosϕ = 0 ΔΔv (V/m/)0 - cosϕ = 0 0 ΔΔv (V/m/)0 - cosϕ = 0 ΔΔv (V/m/)0 - cosϕ = 0 00 P (W/m) (kwh/m) p (kg/m) L x H (mm) IP IK 0 00 0 00 000 000 000 000 000 000 000 000 000 000 000 000 000 0/0 0/0 0/0 0/0 0/0 0/0 () () 0 () 0 () () () 0 0 () () () 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 x x x x x x - - - - - - 0 0 0 0 0 0 () Values for 0 s Temperature rating schedule Mean room temperature ( C) 0 0 0 0 0 K factor 0 0 0 0 0 0 0 Multiplier coefficient of nominal rating for room temperature values different from 0 C