MMBZ5xxBLT Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage regulation with minimum space requirement. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards. Features 5 mw Rating on FR 4 or FR 5 Board Zener Voltage Range.4 V to 9 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class (>6 KV) per Human Body Model AEC Q Qualified and PPAP Capable SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements Pb Free Packages are Available Mechanical Characteristics CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 60 C for Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V 0 MAXIMUM RATINGS Rating Symbol Max Unit Total Power Dissipation on FR 5 Board, (Note ) @ T A = 5 C Derated above 5 C Thermal Resistance, Junction to Ambient Total Power Dissipation on Alumina Substrate, (Note ) @ T A = 5 C Derated above 5 C Thermal Resistance, Junction to Ambient Junction and Storage Temperature Range P D 5.8 mw mw/ C R JA 556 C/W P D 00.4 mw mw/ C R JA 47 C/W T J, T stg 65 to +50 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.. FR 5 =.0 X 0.75 X 0.6 in.. Alumina = 0.4 X 0. X 0.04 in, 99.5% alumina. Cathode SOT CASE 8 STYLE 8 Anode ORDERING INFORMATION MARKING DIAGRAM M Device Package Shipping MMBZ5xxBLT SOT 000/Tape & Reel MMBZ5xxBLTG SOT 000/Tape & Reel MMBZ5xxBLT SOT,000/Tape & Reel MMBZ5xxBLTG SOT xxx xxx = Specific Device Code M = Date Code = Pb Free Package (Note: Microdot may be in either location) SZMMBZ5xxBLTG SZMMBZ5xxBLTG SOT SOT,000/Tape & Reel,000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD80/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page of this data sheet. 000/Tape & Reel Semiconductor Components Industries, LLC, 0 November, 0 Rev. Publication Order Number: MMBZ5BLT/D
MMBZ5xxBLT Series, SZMMBZ5xxBLTG Series ELECTRICAL CHARACTERISTICS (Pinout: -Anode, -No Connection, -Cathode) (T A = 5 C unless otherwise noted, V F = 0.95 V Max. @ I F = ma) I F I Symbol Parameter V Z Reverse Zener Voltage @ I ZT I ZT Z ZT I ZK Reverse Current Maximum Zener Impedance @ I ZT Reverse Current V Z V R I R V F I ZT V Z ZK Maximum Zener Impedance @ I ZK I R Reverse Leakage Current @ V R V R Reverse Voltage I F Forward Current V F Forward Voltage @ I F Zener Voltage Regulator
MMBZ5xxBLT Series, SZMMBZ5xxBLTG Series ELECTRICAL CHARACTERISTICS (Pinout: -Anode, -NC, -Cathode) (V F = 0.9 V Max @ I F = ma for all types.) Zener Voltage (Note ) Zener Impedance Leakage Current Device Device Marking V Z (Volts) @ I ZT Z ZT @ I ZT Z ZK @ I ZK I R @ V R Min Nom Max ma ma A Volts SZ/MMBZ5BL, G 8A.8.4.5 0 0 00 0.5 0 SZ/MMBZ5BL, G 8B.7.5.6 0 0 50 0.5 0 MMBZ5BL, G 8C.56.7.84 0 0 00 0.5 75 MMBZ54BL, G 8D.66.8.94 0 0 400 0.5 75 SZ/MMBZ55BL, G 8E.85.5 0 9 600 0.5 50 SZ/MMBZ56BL, G 8A...47 0 8 600 0.5 5 SZ/MMBZ57BL, G 8B.4.6.78 0 4 700 0.5 5 SZ/MMBZ58BL, G 8C.70.9 4. 0 900 0.5 SZ/MMBZ59BL, G 8D 4.08 4. 4.5 0 000 0.5 5 SZ/MMBZ50BL, G 8E 4.46 4.7 4.94 0 9 900 0.5 5 SZ/MMBZ5BL, G 8F 4.84 5. 5.6 0 7 600 0.5 5 SZ/MMBZ5BL, G 8G 5. 5.6 5.88 0 600 0.5 5 SZ/MMBZ5BL, G 8H 5.70 6 6.0 0 7 600 0.5 5.5 SZ/MMBZ54BL, G 8J 5.89 6. 6.5 0 7 00 0.5 5 4 SZ/MMBZ55BL, G 8K 6.46 6.8 7.4 0 5 750 0.5 5 SZ/MMBZ56BL, G 8L 7. 7.5 7.88 0 6 500 0.5 6 SZ/MMBZ57BL, G 8M 7.79 8. 8.6 0 8 500 0.5 6.5 SZ/MMBZ58BL, G 8N 8.6 8.7 9.4 0 8 600 0.5 6.5 SZ/MMBZ59BL, G 8P 8.64 9. 9.56 0 600 0.5 7 SZ/MMBZ540BL, G 8Q 9.50.50 0 7 600 0.5 8 SZ/MMBZ54BL, G 8R.4.55 0 600 0.5 8.4 SZ/MMBZ54BL, G 8S.40.60 0 0 600 0.5 9. SZ/MMBZ54BL, G 8T.5.65 9.5 600 0.5 0.5 9.9 SZ/MMBZ544BL, G 8U.0 4 4.70 9 5 600 0.5 0. SZ/MMBZ545BL, G 8V 4.5 5 5.75 8.5 6 600 0.5 0. SZ/MMBZ546BL, G 8W 5.0 6 6.80 7.8 7 600 0.5 0. MMBZ547BL, G 8X 6.5 7 7.85 7.4 9 600 0.5 0. SZ/MMBZ548BL,G 8Y 7. 8 8.90 7 600 0.5 0. 4 SZ/MMBZ549BL, G 8Z 8.05 9 9.95 6.6 600 0.5 0. 4 SZ/MMBZ550BL,G 8A 9.00 0.00 6. 5 600 0.5 0. 5 MMBZ55BL, G 8B 0.90. 5.6 9 600 0.5 0. 7 MMBZ55BL, G 8C.80 4 5.0 5. 600 0.5 0. 8 SZ/MMBZ55BL, G 8D.75 5 6.5 5 5 600 0.5 0. 9 SZ/MMBZ554BL, G 8E 5.65 7 8.5 4.6 4 600 0.5 0. MMBZ555BL, G 8F 6.60 8 9.40 4.5 44 600 0.5 0. SZ/MMBZ556BL, G 8G 8.50 0.50 4. 49 600 0.5 0. MMBZ557BL, G 8H.5 4.65.8 58 700 0.5 0. 5 SZ/MMBZ558BL, G 8J 4.0 6 7.80.4 70 700 0.5 0. 7 SZ/MMBZ559BL, G 8K 7.05 9 40.95. 80 800 0.5 0. 0 SZ/MMBZ560BL, G 8L 40.85 4 45.5 9 900 0.5 0. SZ/MMBZ56BL, G 8M 44.65 47 49.5.7 5 00 0.5 0. 6 MMBZ56BL, G 8N 48.45 5 5.55.5 5 0 0.5 0. 9 SZ/MMBZ56BL, G 8P 5.0 56 58.80. 50 00 0.5 0. 4 SZ/MMBZ564BL, G 8Q 57.00 60 6.00. 70 400 0.5 0. 46 MMBZ565BL, G 8R 58.90 6 65. 85 400 0.5 0. 47 MMBZ566BL, G 8S 64.60 68 7.40.8 0 600 0.5 0. 5 MMBZ567BL, G 8T 7.5 75 78.75.7 70 700 0.5 0. 56 MMBZ568BL, G 8U 77.90 8 86..5 0 000 0.5 0. 6 MMBZ570BL, G 8W 86.45 9 95.55.4 400 00 0.5 0. 69. Zener voltage is measured with a pulse test current I Z at an ambient temperature of 5 C NOTE: MMBZ5BLT, MMBZ546BLT, MMBZ55BLT, and MMBZ55BLT Not Available in,000/tape & Reel. The G suffix indicates Pb Free package available.
MMBZ5xxBLT Series, SZMMBZ5xxBLTG Series TYPICAL CHARACTERISTICS VZ, TEMPERATURE COEFFICIENT (mv/ C) θ ZZT, DYNAMIC IMPEDANCE ( Ω ) 8 7 6 5 4 0 - - - 00 0 TYPICAL T C VALUES FOR MMBZ5BLT SERIES I Z = ma 4 5 6 7 Figure. Temperature Coefficients (Temperature Range 55 C to +50 C) 5 ma 0 ma 8 V Z @ I ZT V Z, NOMINAL ZENER VOLTAGE Figure. Effect of Zener Voltage on Zener Impedance 9 T J = 5 C I Z(AC) = 0. I Z(DC) f = khz 0, TEMPERATURE COEFFICIENT (mv/ C) VZ θ IF, FORWARD CURRENT (ma) 0 00 TYPICAL T C VALUES FOR MMBZ5BLT SERIES V Z @ I ZT 0 0 Figure. Temperature Coefficients (Temperature Range 55 C to +50 C) 75 V (MMBZ567BLT) 9 V (MMBZ570BLT) 50 C 75 C 5 C 0 C 0.4 0.5 0.6 0.7 0.8 0.9.0 V F, FORWARD VOLTAGE (V) Figure 4. Typical Forward Voltage.. 4
MMBZ5xxBLT Series, SZMMBZ5xxBLTG Series TYPICAL CHARACTERISTICS C, CAPACITANCE (pf) I Z, ZENER CURRENT (ma) 00 0 0 0. 0.0 0 0 V BIAS V BIAS BIAS AT 50% OF V Z NOM Figure 5. Typical Capacitance 4 6 8 V Z, ZENER VOLTAGE (V) T A = 5 C T A = 5 C Figure 7. Zener Voltage versus Zener Current (V Z Up to V) 0 I R, LEAKAGE CURRENT ( μ A) V Z, ZENER VOLTAGE (V) 00 0 0. 0.0 0.00 0.000 0.0000 0 I Z, ZENER CURRENT (ma) 0 0. +50 C +5 C 55 C 0 0 40 50 60 70 Figure 6. Typical Leakage Current T A = 5 C 0.0 0 50 70 90 Figure 8. Zener Voltage versus Zener Current ( V to 9 V) 80 90 5
MMBZ5xxBLT Series, SZMMBZ5xxBLTG Series PACKAGE DIMENSIONS SOT (TO 6) CASE 8 08 ISSUE AP A E A D e b HE SEE VIEW C 0.95 0.07 L L VIEW C 0.9 0.05 0.8 0.0 c 0.5 SOLDERING FOOTPRINT* SCALE : NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, 98.. CONTROLLING DIMENSION: INCH.. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 0.95 0.07 MILLIMETERS INCHES DIM MIN NOM MAX MIN NOM MAX A 0.89.00. 0.05 0.040 0.044 A 0.0 0.06 0. 0.00 0.00 0.004 b 0.7 0.44 0.50 0.05 0.08 0.00 c 0.09 0. 0.8 0.00 0.005 0.007 D.80.90.04 0. 0.4 0.0 E.0.0.40 0.047 0.05 0.055 e.78.90.04 0.070 0.075 0.08 L 0. 0.0 0.0 0.004 0.008 0.0 L 0.5 0.54 0.69 0.04 0.0 0.09 H E..40.64 0.08 0.094 0.4 0 0 STYLE 8: PIN. ANODE. NO CONNECTION. CATHODE.0 0.079 mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 56, Denver, Colorado 807 USA Phone: 0 675 75 or 800 44 860 Toll Free USA/Canada Fax: 0 675 76 or 800 44 867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800 8 9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 4 790 9 Japan Customer Focus Center Phone: 8 587 50 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBZ5BLT/D