ChE 344 Winter 2013 Mid Term Exam I Tuesday, February 26, Closed Book, Web, and Notes. Honor Code

Similar documents
ChE 344 Winter 2011 Mid Term Exam I + Solution. Closed Book, Web, and Notes

ChE 344 Chemical Reaction Engineering Winter 1999 Final Exam. Open Book, Notes, CD ROM, Disk, and Web

ChE 344 Winter 2013 Final Exam + Solution. Open Course Textbook Only Closed everything else (i.e., Notes, In-Class Problems and Home Problems

ChE 344 Winter 2011 Final Exam. Open Book, Notes, and Web

Name. Honor Code: I have neither given nor received unauthorized aid on this examination, nor have I concealed any violations of the Honor Code.

ChE 344 Winter 2013 Mid Term Exam II Tuesday, April 9, 2013

ChE 344 Winter 2011 Final Exam + Solution. Open Book, Notes, and Web

Chemical Reaction Engineering. Dr. Yahia Alhamed

Chemical Reaction Engineering

Problems Points (Max.) Points Received

Chemical Reaction Engineering

Chemical Reaction Engineering

Midterm II. ChE 142 April 11, (Closed Book and notes, two 8.5 x11 sheet of notes is allowed) Printed Name

Chemical Kinetics and Reaction Engineering

Chemical Kinetics and Reaction Engineering Midterm 1

TABLE OF CONTENT. Chapter 4 Multiple Reaction Systems 61 Parallel Reactions 61 Quantitative Treatment of Product Distribution 63 Series Reactions 65

CBE 142: Chemical Kinetics & Reaction Engineering

Chemical Reaction Engineering. Multiple Reactions. Dr.-Eng. Zayed Al-Hamamre

Chemical Reaction Engineering

PHEN 612 SPRING 2008 WEEK 1 LAURENT SIMON

Mathematical Modeling Of Chemical Reactors

FLOW REACTORS FOR HOMOGENOUS REACTION: PERFORMANCE EQUATIONS AND APPLICATIONS

6. Multiple Reactions

H 0 r = -18,000 K cal/k mole Assume specific heats of all solutions are equal to that of water. [10]

CHEMICAL REACTORS - PROBLEMS OF REACTOR ASSOCIATION 47-60

Lecture 4. Mole balance: calculation of membrane reactors and unsteady state in tank reactors. Analysis of rate data

Chemical Reaction Engineering. Lecture 2

A First Course on Kinetics and Reaction Engineering Unit 33. Axial Dispersion Model

Lecture 8. Mole balance: calculations of microreactors, membrane reactors and unsteady state in tank reactors

Exam 1 Chemical Reaction Engineering 26 February 2001 Closed Book and Notes

Lecture 8. Mole balance: calculations of microreactors, membrane reactors and unsteady state in tank reactors

5. Collection and Analysis of. Rate Data

Chemical Reaction Engineering

ERT 208 REACTION ENGINEERING

Review for Final Exam. 1ChE Reactive Process Engineering

CHE 404 Chemical Reaction Engineering. Chapter 8 Steady-State Nonisothermal Reactor Design

IDEAL REACTORS FOR HOMOGENOUS REACTION AND THEIR PERFORMANCE EQUATIONS

Web Solved Problems Web Example SP-8.1 Hydrodealkylation of Mesitylene in a PFR CH 3 H 2. m-xylene can also undergo hydrodealkylation to form toluene:

Chemical Reaction Engineering. Lecture 7

Chapter 1. Lecture 1

Chemical Reaction Engineering Lecture 5

1. Introductory Material

Chemical Reaction Engineering

CHE 404 Chemical Reaction Engineering. Chapter 8 Steady-State Nonisothermal Reactor Design

Basic Concepts in Reactor Design

CHEMICAL REACTION ENGINEERING

Design of Ideal Batch Reactors operated under Isothermal Conditions (It is important to have this note set with you during all lecture classes.

Dr. Trent L. Silbaugh, Instructor Chemical Reaction Engineering Final Exam Study Guide

10.37 Exam 2 25 April, points. = 10 nm. The association rate constant

Review: Nonideal Flow in a CSTR

Chemical Reaction Engineering

Chemical reactors. H has thermal contribution, pressure contribution (often negligible) and reaction contribution ( source - like)

Chemical Reaction Engineering - Part 12 - multiple reactions Richard K. Herz,

Module 1: Mole Balances, Conversion & Reactor Sizing (Chapters 1 and 2, Fogler)

Chemical Reaction Engineering - Part 14 - intro to CSTRs Richard K. Herz,

To increase the concentration of product formed in a PFR, what should we do?

Chemical Reaction Engineering

Chemical Reaction Engineering Prof. Jayant Modak Department of Chemical Engineering Indian Institute of Science, Bangalore

Process design decisions and project economics Dr. V. S. Moholkar Department of chemical engineering Indian Institute of Technology, Guwahati

CHE 611 Advanced Chemical Reaction Engineering

Chemical Reaction Engineering


Chemical Reaction Engineering - Part 16 - more reactors Richard K. Herz,

Reactors. Reaction Classifications

A First Course on Kinetics and Reaction Engineering Unit 12. Performing Kinetics Experiments

Advanced Chemical Reaction Engineering Prof. H. S. Shankar Department of Chemical Engineering IIT Bombay. Lecture - 03 Design Equations-1

Principles of Chemical Engineering Processes

Chemical Reaction Engineering

CE 329, Fall 2015 Second Mid-Term Exam

THE CHEMICAL REACTION EQUATION AND STOICHIOMETRY

1/r plots: a brief reminder

Pre GATE Pre-GATE 2018

Reaction and Diffusion in a Porous Catalyst Pellet. by Richard K. Herz

1. (25 points) C 6 H O 2 6CO 2 + 7H 2 O C 6 H O 2 6CO + 7H 2 O

CHAPTER FIVE REACTION ENGINEERING

CHEMICAL REACTORS - PROBLEMS OF NON IDEAL REACTORS 61-78

13 th Aug Chemical Reaction Engineering CH3010. Home work problems

A First Course on Kinetics and Reaction Engineering Example 15.4

2. Review on Material Balances

Chemical Reaction Engineering Prof. JayantModak Department of Chemical Engineering Indian Institute of Science, Bangalore

Chemical Reactor flnolysis

INTRODUCTION TO CHEMICAL PROCESS SIMULATORS

Lecture (9) Reactor Sizing. Figure (1). Information needed to predict what a reactor can do.

The Material Balance for Chemical Reactors

The Material Balance for Chemical Reactors. Copyright c 2015 by Nob Hill Publishing, LLC

Chemical Equation and Stoichiometry

REFERENCE TEXTBOOKS MATERIAL AND ENERGY BALANCE: THERMODYNAMICS: TRANSPORT: KINETICS AND REACTOR DESIGN:

Mass balance in a fixed bed reactor is similar to that of a plugflow reactor (eq. 1.1): dx dv. r F (1.1) Recalling dw = B dv, then. r F. dx dw (2.

Figure Q3. Boundary conditions for a tubular reactor.

CHEMICAL ENGINEERING KINETICS/REACTOR DESIGN. Tony Feric, Kathir Nalluswami, Manesha Ramanathan, Sejal Vispute, Varun Wadhwa

Introduction to the course ``Theory and Development of Reactive Systems'' (Chemical Reaction Engineering - I)

4 th Edition Chapter 9

Chemical Reaction Engineering

CE 329, Fall 2015 Assignment 16, Practice Exam

Engineering and. Tapio Salmi Abo Akademi Abo-Turku, Finland. Jyri-Pekka Mikkola. Umea University, Umea, Sweden. Johan Warna.

Development of Dynamic Models. Chapter 2. Illustrative Example: A Blending Process

Steady-State Molecular Diffusion

Kinetics. Consider an irreversible unimolecular reaction k. -d[a]/dt = k[a] Can also describe in terms of appearance of B.

Chemical Reaction Engineering

Mass Transfer Operations I Prof. Bishnupada Mandal Department of Chemical Engineering Indian Institute of Technology, Guwahati

Transcription:

ChE 344 Winter 2013 Mid Term Exam I Tuesday, February 26, 2013 Closed Book, Web, and Notes Name Honor Code (Sign at the end of exam period) 1) / 5 pts 2) / 5 pts 3) / 5 pts 4) / 5 pts 5) / 5 pts 6) / 5 pts 7) / 10 pts 8) / 15 pts 9) / 20 pts 10) / 25 pts Total /100 pts I have a Laptop with Polymath on it that I can bring to the 2 nd Mierm Exam. I will need to use the computer lab for the 2 nd Mierm Exam.

ChE 344 Exam I

(5 pts) 1) Chapter 1 Mole Balances The reaction A + B 2C takes place in an unsteady PFR. The feed is only A and B in equimolar proportions. Which of the following set of equations gives the correct mole balances on A, B and C. Species A and B are disappearing and Species C is being formed. Circle the correct answer where all the mole balances are correct (a) F A0 F A r A d = dn A (b) (c) (d) F B0 F B F C + 2 F A0 F A + 0 F B0 F B + F C + F A0 F A + F B0 F B + F C 2 F A0 F A F B0 F B F C + r A d = dn C r A d = dn C r A d = dn A r A d = dn B r C d = dn C r A d = dn A r A d = dn B r A d = dn C r A d = dn A r A d = dn B r C d = dn C

(5 pts) 2) The reaction takes place in the gas phase A Product 80 70 60 F A0 r A (dm 3 ) 50 40 30 20 10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 You have up to $10,000 to use to purchase a reactor from those given below. Reactor Type Number olume (dm 3 ) Cost CSTR 1 2 $1,000 CSTR 1 4 $2,000 PFR 1 4 $2,000 CSTR 1 6 $4,000 CSTR 1 12 $8,000 PFR 1 12 $6,000 What reactors do you choose, how do you arrange them and what is the highest conversion you can get for $10,000? Approximately what is the corresponding highest conversion X = with your arrangement of reactors? Scheme and olume etc.

(5 pts) 3) Chapter 3 Rate Laws Write the rate law in terms of concentrations for each of the following (a) The reaction 4A+ 2B 2C follows an elementary rate law. The feed is equal molar in A and B r A = (b) The reaction A B+ C is pseudo first order at high concentrations of A and pseudo second order at low concentrations of A r A = (c) The reaction A+ B C is first order in A and overall zero order. (d) The reaction A B+ C r A = is carried out in a constant volume batch reactor and where the reciprocal of the concentration of A varies linearly with time. (e) The reaction A B+ C r A = is carried out in a constant volume batch reactor and where the concentration of A decreases linearly with time. r A =

(5 pts) 4) What four things are wrong with this solution? The gas phase elementary reaction 2A B+ 2C C t0 = 0.4 mol dm 3 F A0 = 10mol s is carried out in a membrane reactor in which there is pressure drop with α = 0.019 kg 1. An equal molar feed of A and inerts, I, enter the reactor and only species B can exit the membrane. Plot the conversion of A down the membrane reactor containing 50 kg of catalyst. The specific reaction rate is k A = 2.5 dm 6 /mol/kg/s, and the mass transfer coefficient k C =1.5dm 3 kg s, Solution C t0 = 0.4 mol dm 3 F A0 = 10mol s B Identify 4 things that are incorrect or may not be included with this solution? Reads Should Read 1. Line # 2. Line # 3. Line # 4. Line #

(5 pts) 5) Problem Statement. The elementary gas phase reaction A + 2B " C is carried out in a packed bed reactor. Calculate the exit conversion from a PBR packed with 800 kg of catalyst. The feed is stoichiometric. Additional Information Solution 1 2 3 4 5 6 7 8 9 10 11 What four things are wrong or may not be included with this solution? Reads Should Read 1. Line # 2. Line # 3. Line # 4. Line #

(5 pts) 6) Chapter 7Analysis of Data (2 pts) 6a) From the following plot, what is the reaction order with respect to A? Circle the correct answer. A) 0 B) 0.5 C) 0.78 D) 1 E) 2 Explain (3 pts) 6b) The following reaction, batch experiments are conducted to evaluate the reaction kinetics. The slope of a ln (r B ) versus ln (C B ) plot is measured to be 1.02 and the intercept is 0.42 when A is in great excess. What is the overall reaction order? Circle the correct answer. A + 2B Products A) 0.42 B) 1.02 C) 1.44 D) Can t tell on the basis of this experiment Explain

(10 pts) 7) Chapter 4 Stoichiometry The reversible reaction 2A B is carried out in a flow reactor where pure A is fed at a concentration of 4.0 mol/dm 3. If the equilibrium conversion is found to be 60% (a) What is the equilibrium constant, K C if the reaction is a gas phase reaction? Gas K C = (b) What is the K C if the reaction is a liquid phase reaction? Liquid K C =

(15 pts) 8) Multiple Choice (15 points) (3 pts) 8a) A reversible, liquid-phase reaction that is first order in both directions proceeds to 50% conversion in a PFR operating isothermally, isobarically, and at steady state. What conversion would be obtained in a CSTR with the same volume and feed stream and operating at exactly the same temperature and pressure? (A) X>50% (B) X<50% (C) 50% (D) insufficient information to answer definitively Reason: (3 pts) 8b) The gas reaction A + B C is carried out in a packed bed where there is pressure drop. Currently 40% conversion is achieved. If the catalyst weight remains the same, but the particle size is increased, then the conversion would (A) increase (B) decrease (C) remain the same (D) insufficient information answer definitively Reason: (3 pts) 8c) For in irreversible second order reaction 50% conversion is currently achieved in one PFR of 1,000 dm 3. It is proposed to use two 500 dm 3 PFRs placed in series. The exit conversion for the two PFRs will be (1) > 50% (2) 50% (3) 50% < (4) Can t tell without the rate law (3 pts) 8d) The rate constant for an irreversible, heterogeneously catalyzed, gas-phase, second order reaction, A Product(s), was determined to be 0.234 from experimental data in a packed-bed reactor. The person analyzing the experimental failed to include the large pressure drop in the reactor in his analysis. If the pressure drop were properly accounted for, the rate constant would be (1) >0.234 (2) < 0.234 (3) 0.234 (4) insufficient information to answer definitively

(3 pts) 8e) Consider the reaction A B If the diameter of a PBR is doubled while keeping the turbulent flow mass flow rate, m, constant, what can be said about that factor by which the rate of pressure drop (dy/dw) will be lowered? Circle the correct answer. A) It will be lowered by a factor of 4 B) It will be lowered by a factor of 16 C) It will be lowered by a factor of 32 D) It will be lowered by a factor of 48 or more Explain

(20 pts) 9) Study Problem P5-20 B, Modified California Problem The elementary gas phase reaction A + B C + D takes place isobarically and isothermally in a PFR where 50% conversion is achieved. The feed is equimolar in A and B. It is proposed to put a CSTR of equal volume upstream, i.e., of the PFR. What will be the intermediate and exit conversions X 1 and X 2 respectively? The entering flow rates and all other variables remain the same as that for the single PFR. X 1 = X 2 =

(25 pts) 10) Study problem P5-9 B. The gas phase reaction A B+ C follows an elementary rate law and is to be carried out first in a PFR and then in a separate experiment in a CSTR. When Pure A is fed to a 10 dm 3 PFR at 300K and a volumetric flow rate of 5 dm 3 /s the conversion is 80%. When a mixture of 50% A and 50% inert (I) is fed to a 10 dm 3 CSTR at 320K and a volumetric flow rate of 5 dm 3 /s the conversion is 80%. What is the activation energy in cal/mol? E =