Pneumatic Tools / Machinery Extensive range of pneumatic tools: Impact Wrenches 2 3 Air Ratchets 2 3 E Drill, angle drill Die Grinders, straight and angled Chisel Hammer Set Orbital Sander, Belt Sander, Angle Grinder Sabre Saw eedle Scaler Air ibbler, Air Shear Ty re Inflator Grease Gun Combination Spray Gun Blind Rivet Gun Air Blow Guns, Air Blow Pens Hot Air Tools Cordless Impact Wrench Set and many more HAZET is permanently investigating into the reduction of the power requirement of machines in order to reduce the environmental impact. The air consumption e.g. of our pneumatics tools is constantly optimized naturally with continuous efficiency and output power! Components and Spare Parts see pages 286 to 29 73
T 3 ltra-light magnesium housing Best possible distribution of weight for ergonomic working (not top heavy) Exhaust air is guided through the handle downwards Light magnesium housing Square, solid 0 mm (3 8 inch) Powerful pin clutch mechanism Recommended torque : 90 Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 08 db (A) Recommended hose diameter: 0 mm Screw size: M3 Vibration acceleration:.70 m/s2 Square, solid 2. mm ( 2 inches) Recommended torque : 2 Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 0.8 db (A) Recommended hose diameter: 0 mm Screw size: M6 Vibration acceleration:.3 m/s2 90 MG 3 30 7 000 97 300 0980 902 MG 70 90 33 700 9.8 230 0997 c T Extreme compact construction enables working in areas with restricted access One-hand operation for right and left handed operators Exhaust air is guided through the handle downwards ltra-light, shock-resistant plastic housing Maximum performance with minimum weight (only.2 kg) Minimal vibrations protecting muscles and joints especially at frequent use p to 0 db(a) more silent than standard models Square, solid 2. mm ( 2 inches) Jumbo hammer striking mechanism Recommended torque : 60 Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 08. db (A) Recommended hose diameter: 0 mm Screw size: M6 Vibration acceleration: 9.7 m/s2 Square, solid 2. mm ( 2 inches) Recommended torque : 8 Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 0 db (A) Recommended hose diameter: 0 mm Screw size: M6 Vibration acceleration:. m/s2 Extra short only 0 mm 902 M 3 678 00 7 27 0000 97. 300 88987 902 L 6 93 33 900 90 20 6970 Components and Spare Parts see pages 286 to 29
For the professional wheel mounting and dismounting on motor vehicles ltra-light, shock-resistant plastic housing maximum performance with minimum weight Square, solid 2. mm ( 2 inches) Recommended torque : 0 Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 0. db (A) Recommended hose diameter: 0 mm Screw size: M6 Vibration acceleration: 2.2 m/s2 Square, solid 2. mm ( 2 inches) Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 97.3 db (A) Screw size: M6 Power setting: single-stage (forward / reverse) Vibration acceleration: 2.30 m/s2 902 90 90 8 33 3700 86.3 990 6882 902 SPC 68 000 27 700 9. 20 6963 Enhanced power characteristics due to new, specially developed air motor as well as efficient air guide and improved pull-up torque of the air motor Specially heat-treated inner parts for minimised wear Ergonomically shaped handles and housing for improved handling and operation Exhaust air is guided through the handle downwards Light (.6 kg) magnesium housing Square, solid 2. mm ( 2 inches) Powerful pin clutch mechanism Recommended torque : 0 Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 03. db (A) Recommended hose diameter: 0 mm Screw size: M6 Vibration acceleration: 7.2 m/s2 i 20 = 3 Recommended torque : 08 Air inlet thread: 6, mm (3 8 ) Sound power level Lp W: 07.8 db (A) Recommended hose diameter: 3 mm Screw size: M30 Vibration acceleration: 2.8 m/s2 902 SPC 70 80 27. 7000 92. 2600 9639 903 MG 627 800 98 600 96.8 60 0920 Components and Spare Parts see pages 286 to 29 7 Enhanced power performance due to efficient air guide and improved pull-up torque of the air motor Specially heat-treated inner parts for minimised wear Ergonomically shaped handle and housing for optimised handling and operation
Exhaust air is guided through the handle downwards Easy handling i 20 = 3 Powerful pin clutch mechanism Recommended torque : 000 Air inlet thread: 6, mm ( 3 8 ) Sound power level Lp W:. db (A) Recommended hose diameter: 3 mm Screw size: M30 Power setting: multi-stage (reverse / forward) Vibration acceleration: 3.6 m/s 2 903 SPC 90 800 76 3800 03. 00 373 Exhaust air is guided through the handle downwards Easy handling Light magnesium housing Powerful twin hammer mechanism Recommended torque : 3 Air inlet thread: 20,67 mm ( 2 ) Sound power level Lp W: 22.2 db (A) Recommended hose diameter: 9 mm Screw size: M32 Power setting: multi-stage (reverse / forward) Vibration acceleration: 2.7 m/s 2 90 MG-Lg 2303 2600 269 00.2 0000 83 Air ratchet Reduced vibrations Exhaust air is guided through the handle downwards Easy handling Light magnesium housing i 6,3 = Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 89 db (A) 9020 2 6 3 80 70 83 0932 i 2 = Powerful twin hammer mechanism Recommended torque : 3 Air inlet thread: 20,67 mm ( 2 ) Sound power level Lp W: 22.2 db (A) Recommended hose diameter: 9 mm Screw size: M32 Power setting: multi-stage (reverse / forward) Vibration acceleration: 20.80 m/s 2 90 MG 2303 2600 269 00.2 800 09227 Reduced vibrations Short design (same dimensions as 9020 2) Square, solid 0 mm ( 3 8 inch) Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 89 db (A) 902 3 6 3 80 70 83 00 66 76 Components and Spare Parts see pages 286 to 29
Air ratchet Mini air ratchet For hand retightening with torque values > 00 360 exhaust (adjustable) Completely closed head avoids the entry of swarf etc. Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 9 db (A) Vibration acceleration: 8.0 m/s 2 9022 2 230 70 80 60 88 200 096 Mini air ratchet Square, solid 2. mm ( 2 inches) Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 0 db (A) Recommended hose diameter: 0 mm Vibration acceleration: 9.0 m/s 2 9022 P-2 08 260 3 280 99 20 838 Mini air ratchet set For hand retightening with torque values > 60 360 exhaust (adjustable) Completely closed head avoids the entry of swarf etc. i 6,3 = Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 0 db (A) Recommended hose diameter: 0 mm 9020 P-2 0 0 72 20 90 000 8323 For hand retightening with torque values > 20 % above DI 360 exhaust (adjustable) Completely closed head avoids the entry of swarf etc. Square, solid 0 mm ( 3 8 inch) Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 03 db (A) Recommended hose diameter: 0 mm Vibration acceleration: 3.90 m/s 2 902 P-2 0 03 300 92 00 8 8 x 3 x 2 mm 8 x 3 x 2 mm 2 pieces, in SmartCase (/9) 6-S In Safety -Insert-Sy stem, 2-component soft foam insert i 6,3 = Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 0 db (A) Recommended hose diameter: 0 mm Power setting: progressively adjustable (forward/ reverse) Contents: 80-, 6 7 8 9 0 2 3 87-220-3 6 7 22-PH PH 2 2223- T 0 T T 20 T 2 T 30 220-9020 P-2 9020 P-2/2 0 0 72 20 90 00 86297 ase A clever solution Components and Spare Parts see pages 286 to 29 77 /9
High performance air ratchet Air ratchet, long style c s: ) value. 20 orque ith approx t h it gw ct w htenin produ d retigmpetitive n a h o For (c > 30 3 g tenin etigh nual r > 270 only) a m r m lues 0 ble fo Suita torque va t with > 2 with e produc petitiv (com tyle y long s Extra mely sturd extre 3 head tchet dy ra 22 r u t s and se Solid r heavy u fo Sturdy workshop construction especially suitable for continuous operation in industrial production processes Extra-strong head made of especially heat-treated special steel Sturdy ratchet head suitable for high permanent stress (series production and the like) Completely closed head avoids the entry of swarf etc. Long service life and high power rating of the device (long service life = long operational availability) 30 (Competitive product approx. 20 ) Especially for commercial vehicles Extra long style extremely sturdy Solid and sturdy ratchet head for heavy use 22 Suitable for manual retightening with torque values > 270 (competitive product with > 20 only) For loosening and tightening firm screw connections The particularly long handle enables optimal control of the torque and good handling of the higher capacity. Square, solid 2. mm ( 2 inches) Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 99.3 db (A) Recommended hose diameter: 0 mm Vibration acceleration: 3.00 m/s2 Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 02 db (A) Recommended hose diameter: 0 mm Vibration acceleration: 3.70 m/s2 9022 P- 330 9 77 60 88.3 390 72269 9022 Lg- Impact ratchet 36 22 2 0 90 2000 70609 Drilling machine X Reaction-free pneumatic impact ratchet for loosening and tightening screw connections in areas with restricted access Reaction-free High torque values approx. 30% above standard products Speed level approx. 3 x higher than standard products on-rebound mechanism for low impact work Suitable for hand retightening with torque values > 270 (competitive product with approx. 20 only) Quick-clamping drill chuck Robust housing Suitable for continuous operation Powerful pin clutch mechanism Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 98 db (A) Recommended hose diameter: 0 mm Vibration acceleration:.3 m/s2 Air inlet thread: 2,9 mm ( ) Sound power level Lp W: 03 db (A) Collet chuck: 0 mm Power setting: single-stage (forward / reverse) Vibration acceleration: 0.0 m/s2 9022 SR- 78 Especially appropriate for car body works and industry 280 02 3 00 9 7093 9030 70 3 2600 9 30 0970 Components and Spare Parts see pages 286 to 29