CONVETA The modular components system in the aerospace industry (maintenance), in industry, the trades and all service work in the field for maintenance and assembly jobs x Fully mobile for use anywhere. x Multitalented numerous combination options. x Wheel it or carry it. x Interchangeable drawers and a range of magazines. Magazines are placed on flat drawers and can be opened easily when the drawer is pulled out. The undersides are coated with non-slip, skydrol and oil resistant rubber. x The magazine drawers can easily be exchanged for normal drawers (as with the Tool Trolleys and Tool Boxes in the full range, with the exception of No 93). x Topple-proof because only one drawer can be opened at any one time. x Drawers designed to match the STAHLWILLE inlay system. x Can be completely locked with cylinder lock (central locking), also available on request with master key locking system for several Tool Boxes and Trolleys. x Hanging option for spray-can holders. x Tough worktop made of plastic, oil and skydrol resistant with compartments for screws, nuts etc. x Can be combined with Tool Trolley No 93 and No 97. x All painted parts have an environmentally friendly powdercoat. 920 Magazine case with 5 drawers and 5 magazines. Converts to tool trolley with undercarriage No 920. Features two removable spray can holders on the end pieces of the case and two integrated lifting handles. Drawers for mounting magazines are removable and lockable in fully extended position. With the exception of the 37 mm high magazine, the other magazines can be replaced with standard drawers. The worktop of the case is fitted with an oil and skydrol resistant plastic mat with compartments for small components. Can be combined Colour with No kg 8480000 red AL 3020 920; 92; 922; 93; 94N; 97N; 97N/KM; 97H/8; 98 46 0.00 92 Wheely box with up-and-over door With 4 wheels O 25 mm (two pivoting casters, one wheel with parking brake). Silver coloured front door pivots open and slides inside, out of the way. Large storage space inside without drawers. The worktop of the case is fitted with an oil and skydrol resistant plastic mat with compartments for small components. Spray can holders No SDH 92 can be retrofitted to the sides (please order separately). Can be combined Colour with No kg 848000 red AL 3020 94N; 920 20 0.00 2
922N Wheely box with drawers With 4 wheels O 25 mm (two pivoting castors, one wheel with parking brake). With 5 silver-coloured drawers (sizes: 4 drawers 60 mm high, x 80 mm). Drawers are removable and lockable in fully extended position. The worktop of the case is fitted with an oil and skydrol resistant plastic mat with compartments for small components. Spray can holders No SDH 92 can be retrofitted to the sides (please order separately). Can be combined Colour with No kg 96480002 red AL 3020 920; 94N 37.4 0.00 Accessories CONVETA 920C-SCH Coated with environmentally friendly silver-coloured textured powder-coat. For mounting tool magazines No 920 C. Magazine drawer kg 848000.85 0.00 920C Coated with environmentally friendly silver-coloured textured powder-coat. For use with magazine drawers No 920 C-SCH. Tool magazines Dimensions Can be combined No mm with No kg 848050 920 C 50 530 x 350 x 38 920 2.9 0.00 848080 920 C 80 530 x 350 x 68 920; 922N; 92NG; 94N; 97N/6; 97N/6KM; 97N/8; 97N/8KM; 97N/9; 97N/9KM; 97H/8 3.3 0.00 84820 920 C 20 530 x 350 x 08 920; 92NG; 97N/6; 97N/6KM; 97N/7; 97N/7KM; 97N/8; 97N/8KM; 97N/9; 97N/9KM; 97H/8 3.7 0.00 3
Tool trolleys, tool boxes, workbenches and accessories 93 Mechanics tool trolleys Both sides with louvre, central locking. 4 ball-bearing mounted drawers, opening to both sides, with stop. Handles integrated in side walls, removable holder for spray cans or similar. Can be enhanced with STAHLWILLE standard and TCS inlays. May be combined with tool box No 94N. 97N/6 Tool trolleys with double-bearing, oil and acid-resistant wheels, brake and 6 fully extendible, removable drawers. Can be enhanced with STAHLWILLE standard and TCS inlays. Holders for spray cans and paper rolls. Divided work area. Centrally locked by cylinder lock. May be combined with tool box No 94N. No Colour kg 8400 93G green 39 0.00 84006 93 red, AL 3020 39 0.00 84003 93B blue, AL 2703035 39 0.00 98 Mechanics tool trolleys with 6 drawers on telescopic rails, can be opened from both sides. ecessed worktop with rubber mat and impact protection made of plastic. Handles integrated in side walls. Central locking. Double-bearing wheels, oil and acid-resistant. Parking brake. Drawers can be individually unlocked. Can be combined with Tool Box No 94N. No Colour kg 86000 97N/6G green 47.7 0.00 860002 97N/6 red, AL 3020 47.7 0.00 860003 97N/6B blue, AL 2703035 47.7 0.00 97N/6KM Tool trolleys With solid multi-purpose worktop No 93/, plastic handles on the drawers and impact protection strips on the vertical edges, with double-bearing, oil and acid-resistant wheels, parking brake and 6 removable fully extendible drawers, holders for paper rolls and spray cans. Can be enhanced with STAHLWILLE standard and TCS inlays. Central locking with a cylinder lock. Can be combined with Tool Box No 94N. Can also be enhanced using additional tray No 93/2 and multifunctional back panel No 93/3 (please order separately). No Colour kg 870000 98G green 50.5 0.00 870002 98 red, AL 3020 50.5 0.00 87000 98B blue, AL 2703035 50.5 0.00 No Colour kg 860004 97N/6KM G green 49.2 0.00 860005 97N/6KM red, AL 3020 49.2 0.00 860006 97/6KM B blue, AL 2703035 48.5 0.00 5
97N/7 Tool trolleys with double-bearing, oil and acid-resistant wheels, brake and 7 fully extendible, removable drawers. Can be enhanced with STAHLWILLE standard and TCS inlays. Holders for spray cans and paper rolls. Divided work area. Centrally locked by cylinder lock. May be combined with tool box No 94N. 97N/8 Tool trolleys with double-bearing, oil and acid-resistant wheels, brake and 8 fully extendible, removable drawers. Can be enhanced with STAHLWILLE standard and TCS inlays. Holders for spray cans and paper rolls. Divided work area. Centrally locked by cylinder lock. May be combined with tool box No 94N. No Colour kg 860007 97N/7G green 49.9 0.00 860008 97N/7 red, AL 3020 49.9 0.00 860009 97N/7B blue, AL 2703035 49.9 0.00 97N/7KM Tool trolleys With solid multi-purpose worktop No 93/, plastic handles on the drawers and impact protection strips on the vertical edges, with double-bearing, oil and acid-resistant wheels, parking brake and 7 removable fully extendible drawers, holders for paper rolls and spray cans. Can be enhanced with STAHLWILLE standard and TCS inlays. Central locking with a cylinder lock. Can be combined with Tool Box No 94N. Can also be enhanced using additional tray No 93/2 and multifunctional back panel No 93/3 (please order separately). No Colour kg 86003 97N/8G green 5.7 0.00 86004 97N/8 red, AL 3020 5.7 0.00 86005 97N/8B blue, AL 2703035 5.7 0.00 97N/8KM Tool trolleys With solid multi-purpose worktop No 93/, plastic handles on the drawers and impact protection strips on the vertical edges, with double-bearing, oil and acid-resistant wheels, parking brake and 8 removable fully extendible drawers, holders for paper rolls and spray cans. Can be enhanced with STAHLWILLE standard and TCS inlays. Central locking with a cylinder lock. Can be combined with Tool Box No 94N. Can also be enhanced using additional tray No 93/2 and multifunctional back panel No 93/3 (please order separately). No Colour kg 86000 97N/7KM G green 5.4 0.00 8600 97N/7KM red, AL 3020 5.4 0.00 86002 97N/7KM B blue, AL 2703035 5.4 0.00 No Colour kg 86006 97N/8KM G green 53.5 0.00 86007 97N/8KM red, AL 3020 53.5 0.00 86008 97N/8KM B blue, AL 2703035 53.5 0.00 6
97N/9 Tool trolleys with double-bearing, oil and acid-resistant wheels, brake and 9 fully extendible, removable drawers. Can be enhanced with STAHLWILLE standard and TCS inlays. Holders for spray cans and paper rolls. Divided work area. Centrally locked by cylinder lock. May be combined with tool box No 94N. 97N/0 Tool trolleys with double-bearing, oil and acid-resistant wheels, brake and 0 fully extendible, removable drawers. Can be enhanced with STAHLWILLE standard and TCS inlays. Holders for spray cans and paper rolls. Divided work area. Centrally locked by cylinder lock. May be combined with tool box No 94N. No Colour kg 86009 97N/9G green 53.8 0.00 860020 97N/9 red, AL 3020 53.8 0.00 86002 97N/9B blue, AL 2703035 53.8 0.00 97N/9KM Tool trolleys With solid multi-purpose worktop No 93/, plastic handles on the drawers and impact protection strips on the vertical edges, with double-bearing, oil and acid-resistant wheels, parking brake and 9 removable fully extendible drawers, holders for paper rolls and spray cans. Can be enhanced with STAHLWILLE standard and TCS inlays. Central locking with a cylinder lock. Can be combined with Tool Box No 94N. Can also be enhanced using additional tray No 93/2 and multifunctional back panel No 93/3 (please order separately). No Colour kg 860025 97N/0G green 56 0.00 860026 97N/0 red, AL 3020 56 0.00 860027 97N/0B blue, AL 2703035 56 0.00 97N/0KM Tool trolleys With solid multi-purpose worktop No 93/, plastic handles on the drawers and impact protection strips on the vertical edges, with double-bearing, oil and acid-resistant wheels, parking brake and 0 removable fully extendible drawers, holders for paper rolls and spray cans. Can be enhanced with STAHLWILLE standard and TCS inlays. Central locking with a cylinder lock. Can be combined with Tool Box No 94N. Can also be enhanced using additional tray No 93/2 and multifunctional back panel No 93/3 (please order separately). No Colour kg 860022 97N/9KM G green 55.9 0.00 860023 97N/9KM red, AL 3020 55.9 0.00 860024 97N/9KM B blue, AL 2703035 55.9 0.00 No Colour kg 860028 97N/0KM G green 58.3 0.00 860029 97N/0KM red, AL 3020 58.3 0.00 860030 97N/0KM B blue, AL 2703035 58.3 0.00 7
97H/8 Tool trolleys with smooth-running plastic castors, locking brake and 8 removable, fully extendible drawers. Can be enhanced with STAHLWILLE standard and TCS inlays. Side wall space can be individually optimised using the square-hole perforations and hooks No 803 804. Holders for spray cans and paper rolls. Divided work area. Centrally locked by cylinder lock. May be combined with tool boxes No 94N. 92NG Mobile workbench With 4 smooth-running plastic wheels, of which 2 are swivelling and have parking brakes; 6 fully extendible removable drawers, holders for paper rolls and spray cans, 30 mm multiplex beechwood worktop. oomy storage area with a shelf in the cabinet, drawers and access door to storage area, each individually lockable with cylinder locks, with a single key. One outer side and the inside of the storage area access door can be individually adapted to suit requirements using perforated sheets with square holes for hooks No 803 804. Can be enhanced with STAHLWILLE standard and TCS inlays. No Colour kg 86003 97H/8G green 55 0.00 860032 97H/8 red, AL 3020 55 0.00 860033 97H/8B blue, AL 270 30 35 55 0.00 94N Tool boxes with 5 fully extendible, removable drawers. Handles integrated in side walls. Can be enhanced with STAHLWILLE standard and TCS inlays. Central locking with a cylinder lock. Can also be mounted on tool trolleys No 93, No 97N, No 97H/8, No 98, Wheely box No 92, No 922N. kg 850003 73 0.00 96/3 Mobile workbench with chassis and retractable tool panel. Five ball-bearing mounted steel drawers with slotted liners for partitioning drawers. Aluminium handle. Automatic catches on all drawers prevent them opening in transit. Lockup cabinet with height-adjustable shelf. Patented worktop is 50 mm thick, warp- and water resistant, multilayer bonded beech wood with clear varnish finish. Front edge has hardwood edging strip. No Colour kg 843000 94NG green 32.5 0.00 8430002 94N red, AL 3020 32.5 0.00 8430003 94NB blue, AL 270 30 35 32.5 0.00 kg 85030003 60 0.00 8
Drawers Coated with environmentally friendly silver-coloured textured powder-coat. 93 Oil and skydrol resistant. Cover Dimensions Can be combined No mm with No kg 8482060 SCH 60 530 x 350 x 60 92NG; 94N; 97N/7; 97N/8; 97N/9; 97N/0; 922N 2.4 0.00 8482080 SCH 80 530 x 350 x 80 92NG; 94N; 97N/6; 97N/8; 97N/9; 97H/8; 920; 922N 2.7 0.00 848200 SCH 00 530 x 350 x 00 92NG; 97N/6; 97N/7; 97N/8; 97N/0; 97H/8 2.95 0.00 848220 SCH 20 530 x 350 x 20 92NG; 97N/6; 97N/7; 97N/8; 97N/9; 97H/8; 920 3.2 0.00 848240 SCH 40 530 x 350 x 40 92NG; 97N/6; 97N/7; 97H/8 3.5 0.00 Drawers with plastic handles Coated with environmentally friendly silver-coloured textured powder-coat. Dimensions Can be combined No mm with No kg 8483060 SCH 60KM 530 x 350 x 60 97N/7KM; 97N/8KM; 97N/9KM; 97N/0KM 2.5 0.00 8483080 SCH 80KM 530 x 350 x 80 97N/6KM; 97N/8KM; 97N/9KM 2.65 0.00 848300 SCH 00KM 530 x 350 x 00 97N/6KM; 97N/7KM; 97N/8KM; 97N/0KM 3.3 0.00 848320 SCH 20KM 530 x 350 x 20 97N/6KM; 97N/7KM; 97N/8KM; 97N/9KM 3.4 0.00 848340 SCH 40KM 530 x 350 x 40 97N/6KM; 97N/7KM 3.6 0.00 VE 50-50 Drawer separators allow you to divide up the drawer the way you need it. Consisting of: one each galvanised steel front and back piece and three separators. Separator height = 40 mm. for No kg 848400 92NG; 93; 94N; 97N; 97N/KM; 97H/8; 920; 922N 0.7 0.00 92 with compartments for small parts such as screws, nuts etc. Oil and Skydrol resistant. 8 compartments each 60 x 80 mm or 80 x 80 mm, 2 compartments each 00 x 65 mm or 50 x 330 mm. Empty tray for small components for No mm g 8382070 92NG; 93; 94N; 97N; 97N/KM; 97H/8; 920; 922N 520 x 340 x 30 330 0.00 for No mm g 89000 93; 94N; 97N; 97N/KM; 97H/8; 920; 92; 922N 680 x 450 x 20 936 0.00 93/ Multi-purpose worktop Particularly sturdy construction with robust, two-part handle-bar. Large worktop and holes for storing e.g. screwdrivers, files, scrapers etc. additional compartments for small components and 2 round recesses for cans. 4 additional holes for mounting the multifunctional back panel No 93/3. Oil and Skydrol resistant. for No mm kg 8900022 93; 94N; 97N; 97N/KM; 97H/8; 920; 92; 922N 780 x 540 x 35 3. 0.00 93/2 Additional tray Slots into and extends the multipurpose worktop No 93/. Oil and Skydrol resistant. for No mm kg 8900023 93; 97N; 97N/KM; 97H/8; 920; 92; 922N 443 x 540 x 35 2.2 0.00 93/3 Perforated panel for attaching to multipurpose worktop No 93/, for mounting drawings & dockets using magnets or for hanging tools with hook sets No 803 to 804. Consisting of: 2 uprights for inserting in the base and perforated panel, silver paint finish. Multifunctional back panel mm kg 8900024 570x365x40 3.7 0.00 9
920 Set of wheels Set consists of two fixed wheels and two pivoting, 25 mm O. One wheel with locking brake. AB97 Capacity approx. 9 l. All painted parts have an environmentally friendly silver finish powder coat. For Tool Trolleys with fewer than 25 slots at the side. ubbish bin for attaching to tool trolleys for No kg 8948000 93; 94N; 97N; 97N/KM; 98; 920; 92; 922N 4.9 0.00 SDH 92 One pair, coated with environmentally friendly silver-coloured textured powder-coat, with holder for paper rolls. Spray can holders for No mm kg 890000 92GL; 93; 97/6KM; 97/6M.; 97/7; 97/8; 98 278 x 300 x 40.6 0.00 AB97N Capacity approx. 9 l. All painted parts have an environmentally friendly silver finish powder coat. For Tool Trolleys with 25 slots at the side. ubbish bin for attaching to tool trolleys for No kg 848300 92NG; 93; 94N; 97N; 97N/KM; 97H/8; 98; 920; 92; 922N 0.00 for No mm kg 890002 92NG; 93; 97N; 97N/KM; 97H/8; 98 278 x 300 x 40.6 0.00 What accessories are available for each Tool Trolley, Tool Box and Mobile Workbench? Accessories No 93 No 98 No 97N/6 No 97N/6KM No 97N/7 No 97N/7KM No 97N/8 No 97N/8KM No 97N/9 No 97N/9KM No 97N/0 No 97N/0KM No 97H/8 No 94N No 920 No 92 No 922N No 92NG Drawers SCH 60 SCH 80 SCH 00 SCH 20 SCH 40 Drawers with plastic handles SCH 60KM SCH 80KM SCH 00KM SCH 20KM SCH 40KM Drawer separators VE 50-50 Magazine drawer 920C-SCH Tool magazines 920 C 50 920 C 80 920 C 20 Magazine stopper 924 Empty tray for small components 92 Worktops 93 93/ Multifunctional back panel 93/3 (only in conjunction with 93/) Additional tray 93/2 Set of wheels 920 ubbish bin AB 97 Spray can holders SDH 92 20
Tool boxes 326/2 Tool box with 2 drawers and a safety lock. The perforated panel in the lid can be arranged as required using spring loaded clips No 8050 (please order separately). W H D mm mm mm kg 8090002 50 270 230 9.5 0.00 W = Width, H = Height, D = Depth 326/3 Tool box with 3 drawers and a safety lock. The perforated panel in the lid can be arranged as required using spring loaded clips No 8050 (please order separately). 8050 GIPMAT x Stops tools slipping x Stops tools rattling x Increases safety 90 Spring clip for perforated panel No 8002, Workshop cabinet No 844, Mobile Workbench No 92NG, Tool Trolley No 97H/8 and Tool Boxes No 326/2, No 326/3, 326/4. size mm g S 8485006 6 6 28 0.00 848502 2 2 35 0.00 protects the tools, prevents them sliding and rattling. One roll will normally be sufficient for a tool trolley with up to seven drawers. Non-slip mat GIPMAT W H D mm mm mm kg 8090003 50 365 230 2 0.00 W = Width, H = Height, D = Depth 326/4 Tool box with 4 drawers and a safety lock. The perforated panel in the lid can be arranged as required using spring loaded clips No 8050 (please order separately). L W mm mm g 8900003 3800 370 930 0.00 L = Length, W = Width Tool cases, hard shell 3209/ sturdy aluminium frame, 2 locks, ergonomically shaped carrying handle, robust jointed lid-prop, tool-holder panel for storing tools from both sides, with 2 pockets and integrated document pouch. ABS insert can be subdivided and includes cover with 6 pockets. Tool case, hard shell, base model W H D mm mm mm kg 8090004 50 45 230 5.8 0.00 W = Width, H = Height, D = Depth W H D mm mm mm kg 8620002 460 30 60 4. 0.00 W = Width, H = Height, D = Depth 2
3209/2 as for No 3209/, but with an additional combination lock, tool-holder panel with 3 pockets and 26 rubber-loop holders, separate document pouch in the lid, ABS inlay tray with 3 pockets and 8 rubber-loop holders. Tool case, hard shell, medium model W H D mm mm mm kg 8620003 460 30 80 4.5 0.00 W = Width, H = Height, D = Depth 3209 Tool case, hard shell, premium model as for No 3209/, but with an additional combination lock, tool-holder panel with 3 pockets and 26 rubber-loop holders, additional tool-holder panel with pockets and a smaller components pouch, separate document pouch in the lid, ABS inlay tray with 3 pockets and 8 rubber-loop holders. No 40aD/25/8 /4" a No 40aD: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" No 40aDL: sizes 3 /6; 7 /32; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6" No 402a: sizes /4; 5 /6; 3 /8; 7 /6; /2" No 400; 405/2; 405/4; 405/6; 407; 42; 45 SG-Q; 47/ No 409 3/8" D /4" a No 45SGB /4" b No 46a 3/8" a sizes 7 /6; /2; 9 /6; 5 /8" No 427/8 3/8" Da455 mm No 43 /4" D 3 /8" a No 45a/9/9 3/8" a No 45a: sizes /4; 5 /6; /32; 3 /8; 7/6; /2; 9 /6; 5 /8; /6; 3 /4; 3 /6; 7 /8" No 47a: sizes 3 /8; 7 /6; /2; 9 /6; 5 /8; /6; 3/4" No 427/0; 427/6; 427/3; 428; 433/; 435SG-Q; 442; 443; 453 No 220 size 0 No 22 size No 222 size 2 No 223 size 3 No 300 sizes 0; ; 2; 3; 4; 5; 6; 8; 0 No 4006/ /4" b No 2503 /4" b No 4722 size ( x 5.5 x 00 mm); size 3 (.2 x 8 x 50 mm); size 4 (.6 x 0 x 75 mm) No 4732 sizes ; 2; 3 No 0760aCV/3 sizes 0.028; 0.035; 0.050; /6; 5 /64; 3 /32; 7/64; /8; 9 /64; 5 /32; 3 /6; 7 /32; /4" No 65 0 5 80 W H D mm mm mm kg 862000 460 30 80 6 0.00 W = Width, H = Height, D = Depth Tool sets for aerospace industry 3200a 72 Tools Basic tool set for aircraft mechanics (piston engine) kg 978460 5 0.00 No 2a/3Pc sizes 5 /32; 3 /6; 3 /64; 7 /32; 5 /64; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" No 3a sizes 3 /6; 3 /64; 7 /32; 5 /64; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6; 9 /32; 5 /8; /6; 3 /4; 25/32; 3 /6; 7 /8; 5 /6; " No 230a sizes /4 x 5 /6; 5 /6 x /32; 3 /8 x 7 /6; 7/6 x /2; /2 x 9 /6; 9 /6 x 5 /8; /6 x 3 /4; 3/6 x 7 /8; 5 /6 x" No 65 0 5 90 No 65 3 5 90 No 65 5 6 240 No 65 75 280 No 66 00 5 80 No 05-8/6 K No 0670 No 0955 No 0960 No 2320 No 232 No 2600 No 2900 No 292N No 2922N No 293 No 30 No 326 No 05/20 x 0 mm; No 08/50 x 2.5; 50 x 3; 50 x 4; 50 x 5; 50 x 6 mm 205 mm O 27 mm 300 g 500 g O 50 mm 3 m 300 mm No 4025 size 4 No 335 22
3205a 27 Tools Standard aircraft maintenance tool set kg 9784602 9.2 0.00 No 2a/3Pc sizes 5 /32; 3 /6; 3 /64; 7 /32; 5 /64; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" No 3a sizes 3 /6; 3 /64; 7 /32; 5 /64; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6; 9 /32; 5 /8; /6; 3 /4" No 230a sizes 5 /6 x /32; 3 /8 x 7 /6; 7 /6 x /2; /2 x 9 /6; 9 /6 x 5 /8; /6 x 3 /4" No 4025 size 4 No 409 3/8" D /4" a No 40aD/25/8 /4" a No 40aD: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" No 40aDL: sizes 3 /6; 7 /32; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6" No 402a: sizes /4; 5 /6; 3 /8; 7 /6; /2" No 400; 405/2; 405/4; 405/6; 407; 42; 45 SG-Q; 47/ No 6 66 0.5 x 4; 0.6 x 3.5; 0.6 x 4.5; 0.8 x 4; 0.8 x 5.5; x 5.5 mm No 220 223 sizes 0; ; 2; 3 No 3008 sizes 0; ; 2; 3; 4; 5 No 300 sizes 0; ; 2; 3; 4; 5; 6; 8; 0 No 4006/ No 2503 /4" b /4" b No 4722 size ( x 5.5 x 00 mm); size 3 (.2 x 8 x 50 mm); size 4 (.6 x 0 x 75 mm) No 4732 sizes ; 2; 3 3207a 7 Tools Electricians set in tool case No 3209 kg 9880322 4.4 0.00 No 3a sizes 3 /6; 3 /64; 7 /32; 5 /64; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6; 9 /32; 5 /8; /6; 3 /4" No 2a/3Pc sizes 5 /32; 3 /6; 3 /64; 7 /32; 5 /64; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" No 40aD/0/8 /4" a No 40aD: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" No 400; 405/2; 405/4; 405/6; 407; 42; 45SG-Q; 47/ No 4006/ /4" b No 4760 VDE size (0.4 x 2.5 x 75 mm); size 3 (0.6 x 3.5 x 00 mm); size 5 ( x 5.5 x 25 mm); size 6 (.2 x 6.5 x 50 mm) No 4765 VDE sizes 0; ; 2 No 2500a sizes /8; 5 /32; 3 /6; 7 /32; /4; 9 /32; 5 /6; /32; 3/8; 7 /6" No 0760aCV/3 sizes 0.028; 0.035; 0.050; /6; 5 /64; 3 /32; 7/64; /8; 9 /64; 5 /32; 3 /6; 7 /32; /4" No 65 0 5 60, No 65 0 5 80 No 65 24 5 60 No 65 29 5 200 No 65 30 5 200 No 65 3 5 70 No 65 0 5 80 No 65 55 5 25 No 65 0 5 90 No 65 3 5 90 No 65 76 5 230 No 66 00 5 30 No 65 5 6 240 No 65 75 220 No 66 00 5 80 No 05-8/6 K No 05/20 x 0 mm; No 08/ 50 x 2.5; 50 x 3; 50 x 4; 50 x 5; 50 x 6 mm No 0955 No 0960 No 2025 No 2030 No 2035 No 2036 No 2053 No 232 No 2900N No 292N No 30 No 326 O 27 mm 300 g 200 mm 250 mm 200 mm 250 mm O 40 mm 300 mm No 66 02 5 80 No 66 23 5 60 No 05-8/6 K No 0960 No 2053 No 2320 No 2600 No 292N No 2922N No 2940 No 05/20 x 0 mm; No 08/50 x 2.5; 50 x 3; 50 x 4; 50 x 5; 50 x 6 mm 300 g 500 g O 40 mm No 3008 sizes 0; ; 2; 3; 4; 5 No 300 sizes 0; ; 2; 3; 4; 5 No 326 No 330 No 33 No 3209 23
3208a 65 Tools Board case for aircraft in tool case No 3209 No 0554 220 250 Volt No 0760aCV/3 sizes 0.028; 0.035; 0.050; /6; 5 /64; 3 /32; 7/64; /8; 9 /64; 5 /32; 3 /6; 7 /32; /4" kg 9880323 8.9 0.00 No 3a sizes /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2" No 4025 sizes 4; 6; 8 No 220 size 0 No 22 size No 222 size 2 No 223 size 3 No 3008 sizes 0; ; 2; 3; 4; 5; 6 No 300 sizes 0; ; 2; 3; 4; 5; 6; 8; 0 No 4006/ /4" b No 4722 size ( x 5.5 x 00 mm); size 3 (.2 x 8 x 50 mm); size 4 (.6 x 0 x 75 mm) No 4732 sizes ; 2; 3 No 0760aCV/3 sizes 0.028; 0.035; 0.050; /6; 5 /64; 3 /32; 7/64; /8; 9 /64; 5 /32; 3 /6; 7 /32; /4" No 65 0 5 80 No 65 0 5 90 No 0765 No 2500 No 08/3 sizes 2; 2.5; 3; 4 mm sizes 6; 7 mm No 09 sizes ; 2; 3; 4; 5; 6; 7; 8 No 65 0 5 60 No 65 5 35 No 65 32 5 70 No 65 36 5 60 No 66 04 6 0 No 66 06 6 30 No 66 23 5 60 No 2900 No 097 No 292N O 50 mm No 65 5 6 240 No 300 No 65 76 5 230 No 335 No 66 00 5 80 No 2320 No 326 Drip oiler Magnetic lifter Electronics tweezers Electronics tweezers No 3209 Extractor hook set 320 0 Tools 24 Electronics set in tool case No 3209 kg 988030 0.7 0.00 No 3 sizes 5.5; 6; 7; 8; 9; 0; ; 2; 3; 4 mm No 3a sizes 3 /6; 7 /32; /4; 3 /8; /2" No 6 No 4025 size 4 No 472 sizes 3.2; 3.5; 4; 4.5; 5 mm size 5 (.2 x 8 x 60 mm) No 4724 size (0.6 x 3.5 x 25 mm); size 2 ( x 5.5 x 25 mm) No 4730 sizes 0; ; 2 No 4753 i sizes 0.7; 0.9;.3 mm No 4760 VDE size (0.4 x 2.5 x 75 mm); size 4 (0.8 x 4 x 00 mm); size 6 (.2 x 6.5 x 50 mm) No 4797 r 475: 0.3 x.5; 0.4 x 2; 0.4 x 2.5; 0.5 x 3 mm l 4752: No 00, No 0; No No 0546 size 2 (0.8 x 4 x 00 mm); size 3 ( x 5.5 x 25 mm) Test equipment set for safety applications Universal soldering iron Solder Solder removing pump, antistatic Blade holders with blades Lamp extractor Magnifying glass 2 Screwdrivers Tweezers Stripper Set of soldering tools Solder removing wire Hand vice Inspection mirror, insulated, O 40 mm No 3209
32a 53 Tools Sheetmetal set kg 97846008 9 0.00 No 0a sizes /4 x 5 /6; 3 /8 x 7 /6; /2 x 9 /6" No 3a sizes 7 /32; /32" No 23a size /2 x 9 /6" No 230a sizes /4 x 5 /6; 3 /8 x 7 /6" No 4025 size 8 No 442 /4" b 3 /8" a No 443 5/6" b 3 /8" a No 453 No 03 3/8" D 50 mm No 04-5/6D No 04/20 x 2; 20 x 3; 20 x 4; 20 x 5; 20 x 6 mm No 05/20 mm No 04 75 x 8 mm No 08/6D No 08/50 x 2.5; 50 x 3; 50 x 4; 50 x 5; 50 x 6; 50 x 8 mm No 4722 size ( x 5.5 x 00 mm); size 3 (.2 x 8 x 50 mm); size 4 (.6 x 0 x 75 mm); size 6 (2.5 x 4 x 250 mm) No 4730 sizes ; 2; 3 No 4734 size 2 No 65 0 4 80 No 65 64 2 75 No 66 02 4 60 No 0670 275 mm 322a 78 Tools Set for line maintenance kg 9784609 4.9 0.00 No 3a sizes /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6" No 4025 size 4 No 45SGB /4" b No 40aD/0/8 /4" a No 40aD: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" No 400; 405/2; 405/4; 405/6; 407; 42; 45SG-Q; 47/ No 22 5 x size No 222 5 x size 2 No 300 3 x (sizes 2; 3; 4; 5; 6; 8) No 4006/ /4" b No 4722 size ( x 5.5 x 00 mm); size 3 (.2 x 8 x 50 mm); size 4 (.6 x 0 x 75 mm) No 4732 sizes ; 2 No 0760aCV/3 sizes 0.028; 0.035; 0.050; /6; 5 /64; 3 /32; 7/64; /8; 9 /64; 5 /32; 3 /6; 7 /32; /4" No 65 0 5 80 No 65 5 6 240 No 65 75 280 No 66 00 5 80 No 0960 No 326 300 g No 0955 No 0970 No 2025 No 2030 No 2035 No 2036 No 2050 No 2200 No 2378 No 2752 32 mm O 3/4; /2 lb. 200 mm 250 mm 200 mm 250 mm 465 mm 45 mm No 2800 No 2900N No 293 No 30 3 m 300 mm 25
323a 24 Tools Engine mechanics set 324a Line maintenance set in tool box No 326/4 kg 9784600 2.2 0.00 No 3a sizes 9 /32; 5 /8; /6; 3 /4" No 30a sizes /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6" No 24 sizes /4 x 5 /6; 5 /6 x 3 /8; 3 /8 x 7 /6; /2 x 9 /6; 5 /8 x 3 /4" No 230a sizes /4 x 5 /6; 5 /6 x 3 /8; 3 /8 x 7 /6; 7/6 x /2; /2 x 9 /6; 9 /6 x 5 /8; 5 /8 x 3 /4; /6 x 3 /4" No 405 /4" Dasizes 0; 4 No 43 /4" D No 45SGB /4" b No 40aD/25/8 /4" a No 40aD: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" No 40aDL: sizes 3 /6; 7 /32; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6" No 402a: sizes /4; 5 /6; 3 /8; 7 /6; /2" No 400; 405/2; 405/4; 405/6; 407; 42; 45 SG-Q; 47/ No 45a/9/9 3/8" a No 45a: sizes /4; 5 /6; /32; 3 /8; 7/6; /2; 9 /6; 5 /8; /6; 3 /4; 3 /6; 7 /8" No 47a: sizes 3 /8; 7 /6; /2; 9 /6; 5 /8; /6; 3/4" No 427/0; 427/6; 427/3; 428; 433/; 435SG-Q; 442; 443; 453 No 09 sizes ; 2; 3; 4; 5 No 4722 size ( x 5.5 x 00 mm); size 2 (.2 x 6.5 x 25 mm); size 4 (.6 x 0 x 75 mm); size 5 (2 x 2 x 200 mm) No 473 sizes ; 2 No 4732 sizes ; 2; 3 xöfor maintenance and overhaul on aeroplanes, 22 Tools kg 988480 27.2 0.00 No 0760aCV/0Pc sizes /6; 5 /64; 3 /32; /8; 5 /32; 3 /6; 7 /32; /4; 5/6; 3 /8" No 65 6 5 200 No 65 3 5 90 No 3a sizes 3 /6; 3 /64; 7 /32; 5 /64; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6; 9 /32; 5 /8; /6; 3 /4; 25/32; 3 /6; 7 /8; 5 /6; ; /6; /8" No 65 5 6 240 No 65 75 220 No 66 00 5 60 No 25a sizes /4 x 5 /6; 5 /6 x /32; 3 /8 x 7 /6; /2 x 9 /6" No 40aD /4" a sizes 3 /6; 7 /32; /4; 9 /32; 5 /6; /32; 3/8; 7 /6; /2; 9 /6" No 0960 300 g No 097/22 4 25/000" No 2600 No 2900N No 292N 500 g O 50 mm No 40aDL /4" a sizes 3 /6; 7 /32; /4; 9 /32; 5 /6; /32; 3/8; 7 /6; /2; 9 /6" No 402a /4" a sizes /4; 5 /6; 3 /8; 7 /6; /2" No 405/2Q /4" Da54 mm No 405/6Q /4" Da50 mm No 407Q /4" Da38 mm No 409M No 45Q No 45SGB No 42 3/8" D /4" a /4" D /4" b /4" ba 26
No 45a 3/8" a sizes /2; 9 /6; 9 /32; 5 /8; /6; 3 /4; 5/6; " No 46a 3/8" a sizes 5 /8; /6; 3 /4; 7 /8" No 427/3Q 3/8" Da76 mm No 427/0Q 3/8" Da240 mm No 428Q No 43 3/8" D a46 mm /4" D 3 /8" a No 432M No 435Q No 443 /2" D 3 /8" a 3/8" D 5/6" b 3 /8" a No 453 No 4000 3/8" D No 04 20 x 2; 20 x 3; 20 x 4; 20 x 5 mm No 09 sizes 2; 5 No 4722 size ( x 5.5 x 00 mm); size 3 (.2 x 8 x 50 mm) No 4732 sizes ; 2; 3 No 0767a/3 sizes 0.050; /6; 5 /64; 3 /32; 7 /64; /8; 9 /64; 5/32; 3 /6; 7 /32; /4; 5 /6; 3 /8" No 65 6 5 200 No 65 32 5 70 No 65 5 6 240 No 65 64 2 75 No 65 75 220 No 66 00 5 60 No 0956 No 0960 No 095/20 No 2053 No 2320 No 232 No 2600 No 2900 No 292N No 2922N O 35 mm 500 g 0.05 mm 270 g O 50 mm No 293 No 326 3 m No 8050 size 6 (4x); size 2 (6x) No 326/4 27
TCS 0/0, 6x7 24x27 mm MF xö TCS 4720/4760VDE+0767 xö 75 x 350 x 66 mm, 0 pieces g 96830358 320 0.00 No 0 sizes 6 x 7; 8 x 9; 0 x ; 2 x 3; 4 x 5; 6 x 7; 8 x 9; 20 x 22; 2 x 24; 24 x 27 mm TCS 3/2, 6 34 mm xö 530 x 350 x 75 mm, 2 pieces g 9683074 357 0.00 No 3 sizes 6; 7; 8; 9; 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 2; 22; 24; 27; 30; 32; 34 mm TCS 50/5/52/32 xö 530 x 350 x 35 mm, 27 pieces g 9683068 925 0.00 No 4720 No 4724 No 4728 No 4730 sizes ; 2; 3 No 4732 size 4 No 4734 size 2 No 4740 sizes 0; ; 2 No 4744 size No 4760 VDE No 0767/9 TCS 4720/4760VDE xö size (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4 x 00 mm); size 5 (.2 x 6.5 x 50 mm); size 6 (.6 x 8 x 75 mm); size 7 (.6 x 0 x 200 mm); size 8 (2 x 2 x 200 mm) size 2 ( x 5.5 x 25 mm) size (0.4 x 2.5 x 50 mm) size (0.4 x 2.5 x 75 mm) sizes.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm 75 x 350 x 50 mm, 32 pieces g 968389 2950 0.00 No 50 /2" a sizes 8; 9; 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 30 mm No 52 /2" a sizes 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 20; 2; 22; 24; 27; 30; 32 mm No 5 /2" a sizes 22; 27 mm TCS 4720/4730 xö 75 x 350 x 35 mm, 7 pieces g 9683878 475 0.00 No 4720 size (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4 x 00 mm); size 4 ( x 5.5 x 25 mm); size 5 (.2 x 6.5 x 50 mm) No 4730 sizes ; 2; 3 530 x 350 x 40 mm, 8 pieces g 9683079 50 0.00 No 4720 No 4724 No 4728 No 4730 sizes ; 2; 3 No 4732 size 4 No 4734 size 2 No 4740 sizes 0; ; 2 No 4744 size No 4760 VDE size (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4 x 00 mm); size 5 (.2 x 6.5 x 50 mm); size 6 (.6 x 8 x 75 mm); size 7 (.6 x 0 x 200 mm); size 8 (2 x 2 x 200 mm) size 2 ( x 5.5 x 25 mm) size (0.4 x 2.5 x 50 mm) size (0.4 x 2.5 x 75 mm) 29
No TCS 472/4734 xö TCS 4820/4830 xö 530 x 350 x 30 mm, 5 pieces g 9683067 60 0.00 No 472 sizes 0 (0.4 x 2.5 x 80 mm); sizes (0.5 x 3.5 x 90 mm); sizes 2 (0.6 x 4 x 0 mm); sizes 4 ( x 6.5 x 40 mm); sizes 5 (.2 x 8x 60 mm) 4724 size 2 ( x 5,5 x 25 mm) No 473 sizes ; 2 No 4732 sizes ; 2 No 4734 size 2 No 0506 0.8 x 4 x 300 mm No 058.0 x 5.5 x 40 mm No 2600 500 g No 2922N TCS 4722/4750+0760+0766 xö 530 x 350 x 40 mm, 36 pieces g 9683096 633 0.00 No 4722 size ( x 5.5 x 00 mm); size 2 (.2 x 6.5 x 25 mm); size 4 (.6 x 0 x 75 mm); size 5 (2 x 2 x 200 mm) No 4724 size 2 ( x 5.5 x 25 mm) No 4730 size No 4732 size 3 No 4734 size 2 No 4750 sizes T6; T7; T8; T9; T0; T5; T20; T25; T27; T30 75 x 350 x 35 mm, 7 pieces g 9683884 555 0.00 No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4 x 00 mm; x 5.5 x 25 mm;.2 x 6.5 x 50 mm No 4830 sizes ; 2; 3 TCS 4724/4840+0767 xö 530 x 350 x 45 mm, 24 pieces g 96830606 633 0.00 No 4724 No 4728 No 4734 size 2 No 4744 size size 2 ( x 5.5 x 25 mm) size (0.4 x 2.5 x 50 mm) No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4 x 00 mm;.2 x 6.5 x 50 mm;.6 x 0 x 200 mm; 2.0 x 2 x 250 mm No 4830 sizes ; 2; 3 No 4840 size No 0767/9 No 7756 No 2922N TCS 650 6602/4 xö sizes.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm No 0760CV/9 sizes.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm No 0766/9 sizes T8; T9; T0; T5; T20; T25; T27; T30; T40 75 x 350 x 35 mm, 4 pieces g 9683879 00 0.00 No 65 0 5 80 No 65 29 5 200 No 65 5 6 240 No 66 02 5 60 30
TCS 02 08/0960/0 xö TCS 02 08/0957/0960/6 xö 75 x 350 x 40 mm, 0 pieces g 9683036 569 0.00 No 02 No 05 200 mm 20 x 2 mm No 08 5 x 2; 50 x 3; 50 x 4; 50 x 5; 50 x 6; 75 x 4; 200 x 8 mm No 0960 500 g 530 x 350 x 45 mm, 6 pieces g 96830609 375 0.00 No 02 No 03 No 05 200 mm 50 mm 20 x 0 mm No 08 50 x 3; 50 x 4; 50 x 5; 50 x 6; 50 x 8 mm TCS 02 08/0957/0960/2 xö No 0957 No 0960 No 2373 No 2600 No 278 O 40 mm 500 g 500 g 530 x 350 x 40 mm, 2 pieces No 293 3 m g 9683070 245 0.00 No 02 No 03 No 05 200 mm 50 mm 20 x 0 mm No 08 50 x 3; 50 x 4; 50 x 5; 50 x 6; 50 x 8 mm No 0957 No 0960 No 278 O 40 mm 500; 800 g TCS 02 08/0957/0960/3 xö No 65 64 2 250 No 39 cars 400 mm TCS 02 08/0956/0960/8 xö 530 x 350 x 55 mm, 8 pieces g 96830620 3653 0.00 No 02 No 03 No 05 50 mm 50 mm 20 x 0 mm No 08 50 x 2.5; 50 x 3; 50 x 4; 50 x 5; 50 x 6; 50 x 8 mm 530 x 350 x 60 mm, 3 pieces g 9683077 5540 0.00 No 02 No 03 No 05 200; 300 mm 75 mm 20 x 2 mm No 08 50 x 3; 50 x 4; 50 x 5; 50 x 6; 50 x 8 mm No 0956 No 0960 No 0356 No 0670 No 0672 No 2374 No 2900N O 50 mm 300; 500 g 275 mm 20 x 305 mm No 0957 O 50 mm No 2965 No 0960 500; 800; 000 g 3
2 0 DIN 30, ISO 002 (metric sizes), Chrome Alloy Steel, chrome plated. Double open ended spanners A L b b 2 a mm mm mm mm mm g S 40030405 4 x 5 00 2.5 4 3.4 0 0.00 40035507 5.5 x 7 20 4.8 7 3.7 9 0 0.00 40030607 6 x 7 20 5.5 7 3.7 7 0 0.00 40030708 7 x 8 40 7 8 4.0 25 0 0.00 40030809 8 x 9 40 8 2 4.0 2 0 0.00 4003080 8 x 0 40 8 23 4.5 33 0 0.00 40030 0 x 55 23 26 4.8 40 0 0.00 400302 0 x 2 70 23 28 5.3 5 0 0.00 400303 0 x 3 70 23 30 5.3 57 0 0.00 40033 x 3 70 26 30 5.3 55 0 0.00 400323 2 x 3 70 28 30 5.3 64 0 0.00 400324 2 x 4 70 28 32 5.3 63 0 0.00 400334 3 x 4 90 30 32 5.3 70 0 0.00 400335 3 x 5 90 30 35 5.3 73 0 0.00 400337 3 x 7 205 30 38 5.8 92 0 0.00 400345 4 x 5 90 32 35 5.3 8 0 0.00 400347 4 x 7 205 32 38 5.8 99 0 0.00 400367 6 x 7 205 36 38 5.8 00 0 0.00 400368 6 x 8 220 36 40 6.7 25 0 0.00 400379 7 x 9 220 38 42 6.7 3 0 0.00 400389 8 x 9 220 40 42.5 6.7 47 0 0.00 400382 8 x 2 235 40 47 7.3 70 0 0.00 4003922 9 x 22 235 42 49 7.3 79 0 0.00 4003924 9 x 24 250 42 53 7.8 27 0 0.00 40032022 20 x 22 235 45 49 7.3 85 0 0.00 4003223 2 x 23 250 47 5 7.8 225 5 0.00 4003224 2 x 24 250 47 53 7.8 25 5 0.00 40032224 22 x 24 250 49 53 7.8 232 5 0.00 40032426 24 x 26 270 53 57.5 8.3 293 5 0.00 40032427 24 x 27 280 53 60 8.3 299 5 0.00 40032528 25 x 28 285 55 62 8.3 309 5 0.00 40032730 27 x 30 300 60 66 9.4 42 5 0.00 40032732 27 x 32 300 60 70 9.4 48 5 0.00 40033032 30 x 32 300 66 70 9.4 45 5 0.00 40033034 30 x 34 300 66 75 9.4 480 5 0.00 40033236 32 x 36 325 70 80 0 546 5 0.00 40033436 34 x 36 325 75 80 0 69 0.00 4003364 36 x 4 375 80 88 800 0.00 4003446 4 x 46 425 88 94.5 2 040 0.00 0a Double open ended spanners A L b b 2 a " mm mm mm mm g S 4043620 /4 x 5 /6 40 6 8 4 2 0 0.00 40432024 5/6 x 3 /8 40 8 23 4.5 34 0 0.00 40432428 3/8 x 7 /6 55 23 26 4.8 48 0 0.00 40432832 7/6 x /2 70 26 30 5.3 58 0 0.00 40433234 /2 x 9 /6 90 30 32 5.3 73 0 0.00 40433436 9/6 x 5 /8 205 32 36 5.8 96 0 0.00 40433538 9/32 x /6 205 35 40 5.8 05 0 0.00 40433638 5/8 x /6 205 36 40 5.8 0 0 0.00 40433640 5/8 x 3 /4 220 36 42 6.7 35 0 0.00 40433840 /6 x 3 /4 220 40 42 6.7 35 0 0.00 40433842 /6 x 3 /6 235 40 47 7.3 67 0 0.00 40434044 3/4 x 7 /8 235 42 49 7.3 77 0 0.00 4043442 25/32 x 3 /6 235 45 47 7.3 90 0 0.00 40434446 7/8 x 5 /6 250 49 53 7.8 235 0 0.00 40434648 5/6 x 270 53 55 8.3 303 5 0.00 40435258 /8 x 5 /6 300 64 75 9.4 502 5 0.00 Sets: Double open ended spanners Content No mm/" g 96400305 0/8 6 x 7; 8 x 9; 0 x ; 2 x 3; 4 x 5; 6 x 7; 8 x 9; 20 x 22 693 0.00 9640032 0/9 ) 6 x 7; 8 x 9; 0 x ; 2 x 3; 4 x 5; 6 x 7; 8 x 9; 20 x 22; 2 x 24 945 0.00 96400307 0/0 6 x 7; 8 x 9; 0 x ; 2 x 3; 4 x 5; 6 x 7; 8 x 9; 20 x 22; 24 x 27; 30 x 32 540 0.00 9640033 0/ ) 6 x 7; 8 x 9; 0 x ; 2 x 3; 4 x 5; 6 x 7; 8 x 2; 9 x 22; 24 x 27; 30 x 32; 34 x 36 249 0.00 96400306 0/2 6 x 7; 8 x 9; 0 x ; 2 x 3; 4 x 5; 6 x 7; 8 x 9; 20 x 22; 2 x 23; 24 x 27; 25 x 28; 30 x 32 225 0.00 96404306 0a/7 /4 x 5 /6; 3 /8 x 7 /6; /2 x 9 /6; 5 /8 x 3 /4; /6 x 3 /6; 7/8 x 5 /6; /8 x 5 /6 242 0.00 96404307 0a/ /4 x 5 /6; 3 /8 x 7 /6; /2 x 9 /6; 9 /6 x 5 /8; 9 /32 x /6; 5/8 x 3 /4; /6 x 3 /6; 3 /4 x 7 /8; 25 /32 x 3 /6; 7 /8 x 5 /6; /8 x 5 /6 870 0.00 Standard packing: clear view wallet. ) in convenient clip holder 36
3 Combination spanners OPEN-BOX P DIN 33 form A/ISO 7738 form A (metric sizes), Chrome Alloy Steel, chrome plated. A L b d a a 2 mm mm mm mm mm mm g S 40085500 5.5 00 4.8 9.2 3.5 5.8 3 0 0.00 40080606 6 05 5.5 9.9 3.6 6 5 0 0.00 40080707 7 0 7.3 3.9 6 20 0 0.00 40080808 8 5 8 2.4 4.2 7 2 0 0.00 40080909 9 20 2 3.4 4.5 7 27 0 0.00 400800 0 25 23 4.8 4.8 7 35 0 0.00 4008 35 26 6.4 4.8 8 43 0 0.00 400822 2 40 28 7.8 5.3 8.5 46 0 0.00 400833 3 60 30 9. 5.3 8.5 57 0 0.00 400844 4 65 32 20.6 5.3 8.5 68 0 0.00 400855 5 70 35 2.9 5.3 8.5 73 0 0.00 400866 6 80 36 23.2 5.8 0 89 0 0.00 400877 7 90 38 24.6 5.8 0 99 0 0.00 400888 8 200 40 26 6.7.5 26 0 0.00 400899 9 230 42 27.5 6.7.5 42 0 0.00 40082020 20 230 45 29 7 3 76 0 0.00 400822 2 260 47 30.3 7.3 3 26 0 0.00 40082222 22 260 49 3.8 7.3 3 220 0 0.00 40082323 23 280 53 33.5 7.8 4 25 5 0.00 40082424 24 280 53 34.9 7.8 4 254 5 0.00 40082525 25 300 55 36.3 8.4 4.5 28 5 0.00 40082626 26 300 57.5 37.8 8.4 4.5 35 5 0.00 40082727 27 300 60 39.2 8.4 4.5 345 5 0.00 40082828 28 320 62 40.6 8.4 4.5 368 5 0.00 40082929 29 330 64 4.9 8.9 6 420 5 0.00 40083030 30 330 66 43.2 8.9 6 404 5 0.00 40083232 32 360 70 45.8 9.4 6.5 484 5 0.00 40083434 34 450 80 48 9.4 7 683 0.00 40083636 36 460 88 50.8 0 8 787 0.00 40083838 38 480 87 53.6 9 95 0.00 400844 4 480 88 57.8 9 055 0.00 40084646 46 500 94.5 65.2 3 20 352 0.00 40085050 50 530 03 73 4 2 804 0.00 40085555 55 560 4 8 5 22 293 0.00 40086060 60 590 25 89.8 6 24 2925 0.00 3a Combination spanners OPEN-BOX A L b d a a 2 " mm mm mm mm mm g S 404822 3/6 95 4 9.8 3 3.2 0 5 0.00 404833 3/64 95 4 9.8 3 3.2 0 5 0.00 404844 7/32 95 4 9.8 3 3.2 0 5 0.00 404855 5/64 95 4 9.8 3 3.2 9 5 0.00 404866 /4 05 5.5 0.2 3.6 6 4 0 0.00 404888 9/32 0 7.3 3.9 6 7 0 0.00 40482020 5/6 5 8 2.4 4.2 7 20 0 0.00 40482222 /32 20 2 3.4 4.5 7 26 0 0.00 40482424 3/8 25 23 4.3 4.8 7 32 0 0.00 40482828 7/6 35 26 6.4 4.8 8 4 0 0.00 40483232 /2 60 30 8.8 5.3 8.5 57 0 0.00 40483434 9/6 65 32 20.6 5.3 8.5 68 0 0.00 40483535 9/32 70 35 2.9 5.3 8.5 74 0 0.00 40483636 5/8 80 37 23.2 5.8 0 88 0 0.00 40483838 /6 200 40 25.3 6.7.5 6 0 0.00 40484040 3/4 230 42 27.5 6.7.5 44 0 0.00 404844 25/32 235 45 29 7 3 75 5 0.00 40484242 3/6 260 47 30 7.3 3 204 5 0.00 40484444 7/8 260 49 3.8 7.3 3 27 5 0.00 40484646 5/6 280 53 34.9 7.8 4 255 5 0.00 40484848 300 55 37.2 8.4 4.5 286 5 0.00 40485050 /6 300 60 39.2 8.4 4.5 327 5 0.00 40485252 /8 330 64 4.4 8.9 6 380 5 0.00 40485454 3 /6 335 66 43.2 8.9 6.5 398 0.00 40485656 /4 360 70 45.8 9.4 6.5 504 5 0.00 40485858 5 /6 450 74 47 9.6 7 67 0.00 40486060 3 /8 460 80 49.3 0 8 796 0.00 40486262 7 /6 460 80 5.4 0 8 770 0.00 40486464 /2 480 87 53.6 9 96 0.00 40486666 5 /8 480 88 58 9 02 0.00 40486969 3 /6 500 94.5 65.3 3 20 343 0.00 40487070 7 /8 530 03 68.4 4 2 779 0.00 40487272 2 530 03 74 4 2 87 0.00 2 37
20 Double ended ring spanners P StahlwilleSTABIL offset, DIN 838/ISO 004 (metric sizes), Chrome Alloy Steel, chrome plated. 2 Sets: Combination spanners OPEN-BOX Content No mm/" g 9640083 3/6 3 ) 7; 8; 0; 3; 7; 9 457 0.00 9640080 3/9 9; 0; ; 2; 3; 4; 7; 9; 22 758 0.00 9640084 3/9N 3 ) 7; 8; 0; ; 3; 7; 9; 22; 24 002 0.00 96400808 3/0KT ) 8; 9; 0; ; 2; 3; 4; 5; 7; 9 746 0.00 96400802 3/ 8; 9; 0; ; 2; 3; 4; 5; 7; 9; 22 95 0.00 9640085 3/3 3 ) 7; 8; 9; 0; ; 2; 3; 4; 5; 7; 9; 22; 24 282 0.00 96400803 3/5 6; 7; 8; 9; 0; ; 2; 3; 7; 9; 22; 24; 27; 30; 32 2236 0.00 9640086 3/6 2 ) 7; 8; 9; 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 2; 22; 24 620 0.00 96400804 3/7 6; 7; 8; 9; 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 20; 2; 22 493 0.00 96400805 3/26 2 ) 6; 7; 8; 9; 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 20; 2; 22; 23; 24; 25; 26; 27; 28; 29; 30; 32 4705 0.00 96404803 3a/8 7/6; /2; 9 /6; 5 /8; /6; 3 /4; 3 /6; 7 /8 959 0.00 9640482 3a/0KT ) /4; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6; 5 /8; /6; 3 /4 750 0.00 96404804 3a/20 2 ) /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6; 9 /32; 5 /8; /6; 3/4; 25 /32; 3 /6; 7 /8; 5 /6; ; /6; /8; /4 327 0.00 Standard packing: clear view wallet. ) carton with clear view cover 2 ) packed in carton 3 ) in convenient clip holder A L d d 2 a a 2 t mm mm mm mm mm mm mm g S 4040607 6 x 7 65 0.5.8 6 7 8 46 0 0.00 4040809 8 x 9 80 3. 4.5 7 8 20 62 0 0.00 404080 8 x 0 80 3. 5.8 7 9 2 6 0 0.00 4040 0 x 200 5.8 7.2 9 9 23 93 0 0.00 40403 0 x 3 220 5.8 20 9 0 25 22 0 0.00 40423 2 x 3 220 8.6 20 9 0 25 26 0 0.00 40437 3 x 7 245 20 25.3 0 2 27 69 0 0.00 40445 4 x 5 245 2.3 22.6 0 2 27 63 0 0.00 40467 6 x 7 255 23.9 25.3 2 27 8 0 0.00 40479 7 x 9 270 25.3 28 2 3 29 220 0 0.00 40489 8 x 9 275 26.6 28 2 3 29 228 0 0.00 40482 8 x 2 300 26.6 30.7 2 3 3 279 0 0.00 404922 9 x 22 300 28 32. 3 4 3 35 0 0.00 4042022 20 x 22 300 29.4 32. 3 4 3 37 5 0.00 404223 2 x 23 35 30.7 33.4 3 4 3 32 5 0.00 404224 2 x 24 330 30.7 34.7 3 4 34 384 5 0.00 4042224 22 x 24 330 32. 34.7 4 4 34 368 5 0.00 4042426 24 x 26 330 34.7 37.3 4 5 34 427 5 0.00 4042427 24 x 27 330 34.7 38.6 4 5 34 447 5 0.00 4042528 25 x 28 350 36 40 4 5 34 44 5 0.00 4042730 27 x 30 360 38.3 42.6 5 5 37 595 5 0.00 4042732 27 x 32 360 39.3 47.2 5 6 37 596 5 0.00 4043032 30 x 32 365 42.6 45.4 5 6 37 603 5 0.00 4043034 30 x 34 365 42.6 48 5 6 37 670 0.00 404364 36 x 4 440 53 60 7 8 40 063 0.00 4044650 46 x 50 535 65.2 73 9 20 45 709 0.00 20a Double ended ring spanners A L d d 2 a a 2 t " mm mm mm mm mm mm g S 444620 /4 x 5 /6 80.8 3. 7 7 20 6 0 0.00 4442428 3/8 x 7 /6 200 5.8 7.2 9 9 23 88 0 0.00 4443234 /2 x 9 /6 220 20 2.3 9 0 25 3 0 0.00 4443436 9/6 x 5 /8 245 2.3 25.3 0 2 27 68 0 0.00 4443538 9/32 x /6 255 23.9 25.3 2 27 77 0 0.00 4443640 5/8 x 3 /4 270 23.9 28 2 3 29 235 0 0.00 4443842 /6 x 3 /6 300 25.3 30.7 2 3 3 280 5 0.00 4444044 3/4 x 7 /8 300 28 32. 3 4 3 299 5 0.00 444442 25/32 x 3 /6 300 29.4 32. 3 4 3 333 5 0.00 4444446 7/8 x 5 /6 330 32. 34.7 4 4 34 363 5 0.00 4444648 5/6 x 330 34.7 37.3 4 5 34 49 5 0.00 4445258 /8 x 5 /6365 42.6 45.4 5 6 37 58 0.00 4445864 5 /6 x /2440 53 60 7 8 40 076 0.00 38
2 Small double open ended spanners ELECTIC Chrome Alloy Steel, chrome plated. 30aSP Spline drive combination spanners Q MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated. A L b a mm mm mm mm g S 40063232 3.2 70 0.5 2 5 0 0.00 40063535 3.5 70 0.5 2 5 0 0.00 40060404 4 70 0.5 2 5 0 0.00 40064545 4.5 70 0.5 2 5 0 0.00 40060505 5 78 2.6 2 7 0 0.00 40065555 5.5 78 2.6 2 7 0 0.00 40060606 6 78 2.6 2 6 0 0.00 40060707 7 9 4.7 2 9 0 0.00 40060808 8 96 6.8 3 6 0 0.00 40060909 9 03 8.9 3 9 0 0.00 400600 0 05 2 3 22 0 0.00 4006 6 24.2 3 27 0 0.00 400622 2 6 24.2 3 27 0 0.00 400633 3 3 28.3 3 37 0 0.00 400644 4 3 28.3 3 36 0 0.00 2a Small double open ended spanners ELECTIC A L b a " mm mm mm g S 404600 5/32 70 0.5 2 5 0 0.00 404622 3/6 70 0.5 2 5 0 0.00 404633 3/64 78 2.6 2 7 0 0.00 404644 7/32 78 2.6 2 6 0 0.00 404655 5/64 78 2.6 2 6 0 0.00 404666 /4 9 4.7 2 9 0 0.00 404688 9/32 9 4.7 2 9 0 0.00 40462020 5/6 96 6.8 3 6 0 0.00 40462222 /32 03 8.9 3 9 0 0.00 40462424 3/8 05 2 3 22 0 0.00 40462828 7/6 6 24.2 3 28 0 0.00 40463232 /2 3 28.3 3 37 0 0.00 40463434 9/6 3 28.3 3 36 0 0.00 30a Combination spanners P Q Fed. Spec. GGG-W-636 E, HPQ high performance steel, chrome plated. Spline A L b d a a 2 size " mm mm mm mm mm g S 405866 8 /4 05 4.2 0 3.6 5.6 3 5 0.00 40582020 0 5/6 5 7 2.2 4.5 6.4 20 5 0.00 40582424 2 3/8 25 20.5 4.8 5.2 7 32 5 0.00 40582828 4 7/6 35 23 6.5 6 8 42 5 0.00 40583232 6 /2 50 27 8.7 6.5 8.5 6 5 0.00 40583434 8 9/6 65 30.5 20.8 7 8.5 78 5 0.00 6 Combination spanners OPEN-BOX ISO 338, Chrome Alloy Steel, chrome plated. A L b d a a 2 mm mm mm mm mm mm g S 40093232 3.2 75 0 6.6 3 3.2 6 0 0.00 40093535 3.5 75 0 6.6 3 3.2 6 0 0.00 40094040 4 85 2.5 7.8 3 3.2 9 0 0.00 40094545 4.5 85 2.5 7.8 3 3.2 8 0 0.00 40095050 5 95 4 9.8 3 3.2 0 0.00 80a Double ended ring spanners P Q short, shallow offset, Fed. Spec. GGG-W-636 E, S.B.A.C Tech. Spec. T.S. 48 up to size /2", HPQ high performance steel, chrome plated. 2 A L b d a a 2 " mm mm mm mm mm g S 405766 /4 05 4.2 9.8 3.6 6 3 0 0.00 405788 9/32 0 5.5 0.9 4. 6 6 0 0.00 40572020 5/6 5 7 2 4.5 7 20 0 0.00 40572222 /32 20 9 3. 4.9 7 25 0 0.00 40572424 3/8 25 20.5 4. 5.2 7 32 0 0.00 40572828 7/6 35 23 6.2 6 8 42 0 0.00 40573232 /2 50 27 8.2 6.5 8.5 6 0 0.00 40573434 9/6 65 30.5 20.6 7 8.5 78 0 0.00 A L d d 2 a a 2 t t 2 " mm mm mm mm mm mm mm g S 460620 /4 x 5 /6 07 0.2.8 7 8 7.2 7.4 26 0 0.00 4602428 3/8 x 7 /6 2 4.6 6.7 6.7 7.8 9 0 42 0 0.00 4603234 /2 x 9 /6 40 8.5 20.7 8.7 9.5 2 62 0 0.00 4603436 9/6 x 5 /8 48 20.7 22.6 9.5 0.5.5 2.5 87 0 0.00 39
230a Double ended ring spanners P Q shallow offset, SAE AS 954 (dimensions and test loads); Fed. Spec. GGG-W-636E, S.B.A.C. Techn. Spec. T.S. 48 up to size /2", HPQ high performance steel, chrome plated. 220 Double ended ring spanners P Q extra long, 5 angled, SAE AS 954-E (test loads) (American sizes), HPQ high performance steel, chrome plated. 2 A L d d 2 a a 2 t t 2 " mm mm mm mm mm mm mm g S 46620 /4 x 5 /6 80 0.2.9 5.2 6 7.9 8.8 36 0 0.00 462022 5/6 x /32 95.9 3.5 7 8 8 9 45 0 0.00 462024 5/6 x 3 /8 95.9 4.6 6 7.9 0.8 2.4 54 0 0.00 462428 3/8 x 7 /6 25 4.6 6.7 7.9 8.7.4.7 74 0 0.00 462832 7/6 x /2 225 6.7 9.5 8.7 9..9 2.6 05 0 0.00 463234 /2 x 9 /6 235 9.5 20.7 9. 9.5 2.2 2.9 9 0 0.00 463436 9/6 x 5 /8 245 20.7 22.6 9.5.5 3.8 3.9 22 0 0.00 463640 5/8 x 3 /4 274 22.6 27.5. 2 4.8 5.8 56 0 0.00 463840 /6 x 3 /4 275 25.4 27.5. 2 5.2 5.8 58 0 0.00 464244 3/6 x 7 /8 30 29.5 3.7 3.5 4.5 9 20 75 5 0.00 464648 5/6 x 340 34. 36.5 4.5 5 22 23 375 5 0.00 464850 x /6 368 36.5 38.6 5 6 23 24 460 5 0.00 465256 /8 x /4 403 40.8 45 6 8 25 27 620 5 0.00 23 Double ended ring spanners P shallow offset, DIN 897/ISO 004 (metric sizes), Chrome Alloy Steel, chrome plated. A L d d 2 a a 2 mm mm mm mm mm mm g S 4035507 5.5 x 7 85 8.8 5.3 5.8 28 5 0.00 4030608 6 x 8 205 9.8 2. 5.6 6 34 5 0.00 40309 9 x 250 4.2 6.7 8 8.7 80 5 0.00 4030 0 x 250 5.5 6.7 8 8.7 80 5 0.00 40324 2 x 4 290 8.3 20.7 9.5 9.5 62 5 0.00 40334 3 x 4 290 8.7 20.7 9.5 9.5 60 5 0.00 40379 7 x 9 365 25 27.5 2 296 5 0.00 40389 8 x 9 365 25.5 27.5 2 295 5 0.00 403922 9 x 22 408 27.5 3.5 3 4.3 520 5 0.00 4032022 20 x 22 409 28.5 3.5 3 4.3 55 5 0.00 220a Double ended ring spanners A L d d 2 a a 2 " mm mm mm mm mm g S 44346 7/32 x /4 84 9 9.9 5.3 5.8 29 5 0.00 443620 /4 x 5 /6 205 9.9 2.2 5.6 6 33 5 0.00 4432428 3/8 x 7 /6 250 4 6 8 8.7 79 5 0.00 4433234 /2 x 9 /6 290 8.5 2 9.5 9.5 60 5 0.00 4433640 5/8 x 3 /4 363 22.6 27 2 298 5 0.00 4433840 /6 x 3 /4 365 25 27 2 29 5 0.00 220aSP Double ended ring spanners Q extra long, with spline-drive profile, 5 angled, MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated. A L d d 2 a a 2 t t 2 mm mm mm mm mm mm mm mm g S 4070607 6x7 70 9.5 0.8 6 7 7 8 4 0 0.00 4070809 8x9 79 2. 3.3 7 8 8 9 49 0 0.00 4070 0 x 88 4.6 5.9 8.5 9.5 9 0 66 0 0.00 40723 2 x 3 203 7.3 8.6 9.5 0.5 0 95 0 0.00 40745 4 x 5 29 20. 2.40.5.5 3 09 0 0.00 40767 6 x 7 248 22.7 24..5 2.5 4 5 44 0 0.00 40779 7 x 9 250 24. 27 2.5 3.5 5 8 62 0 0.00 40789 8 x 9 25 25.5 27 2.5 3.5 6 8 57 0 0.00 4072022 20 x 22 280 28.5 3.33.5 4.5 9 20 223 5 0.00 407223 2 x 23 328 29.8 32.93.5 4.5 9 22 28 5 0.00 4072427 24 x 27 376 34.3 38.64.5 6 22 24 426 5 0.00 4073032 30 x 32 429 42.6 45.2 8 8 26 27 608 5 0.00 Spline A L d d 2 a a 2 size " mm mm mm mm mm g S 460709 7x9 7 /32 x 9 /32 85 9.4.5 5.3 5.8 23 5 0.00 46080 8x0 /4 x 5 /6 205 0.4 2.4 5.6 6 33 5 0.00 4624 2 x 4 3 /8 x 7 /6 250 4.9 7 8 8.7 79 5 0.00 4668 6 x 8 /2 x 9 /6 290 9 2 9.5 9.5 6 5 0.00 46820 8 x 20 9 /6 x 5 /8 35 2 23 0 205 5 0.00 462224 22 x 24 /6 x 3 /4 365 25 27.5 2 30 5 0.00 462630 26 x 30 3 /6 x 5 /6 40 29.5 34 3 4.3 496 5 0.00 462832 28 x 32 7 /8 x 430 32 36.5 3.5 5 582 5 0.00 40
24 P DIN 38/ISO 338 (metric sizes), Chrome Alloy Steel, chrome plated. H Double ended open ring spanners, angled 240 atchet wrenches registered design, specially suitable for union nuts. Using a single wrench, it is possible to tighten/loosen both metric and imperial nuts and bolts. Made of hardened and tempered stainless steel. 2 A L d d 2 a a 2 m m 2 mm mm mm mm mm mm mm mm g S 408080 8x0 45 7.5 9.5 7 8.5 6.3 7. 39 0 0.00 40809 9x 55 8.5 2.5 8.5 9 6.7 8.6 54 0 0.00 4080 0 x 55 9.5 2.5 8.5 9 7. 8.6 55 0 0.00 40802 0 x 2 60 9.5 22.5 8.5 9.5 7. 9 59 0 0.00 4083 x 3 70 2.5 24 9 0 8.6 0 80 0 0.00 40824 2 x 4 80 24 26 9.5 0.5 9 89 0 0.00 24a H Double ended open ring spanners, angled A L d d 2 a a 2 m m 2 " mm mm mm mm mm mm mm g S 448620 /4 x 5 /6 05 6.5 8 5.5 7 3.7 5 32 0 0.00 4482024 5/6 x 3 /8 45 7.5 9.5 7 8.5 6.3 7. 39 0 0.00 4482428 3/8 x 7 /6 55 9.5 2.5 8.5 9 7. 8.6 57 0 0.00 4483234 /2 x 9 /6 80 24 26 9.5 0.5 9.5 87 0 0.00 A L b a mm/" mm mm mm g S 400808 8 5 /6 2.4 6 4 60 0.00 4000 0 3 /8 33.3 20 4 70 0.00 40 7 /6 40.4 23 5 03 0.00 4022 2 5 /32 46.3 25 5 00 0.00 4033 3 /2 68.4 26.8 6 54 0.00 4044 4 9 /6 74.6 29.6 6 80 0.00 4066 6 5 /8 9.3 32.8 7 270 0.00 4077 7 2 /32 20.7 34.3 7 30 0.00 4088 8 /6 22.8 36.2 7 30 0.00 4099 9 3 /4 238.5 38.5 7 380 0.00 24 P DIN 38/ISO 338 (metric sizes), Chrome Alloy Steel, chrome plated. I Double ended open ring spanners, angled Sets: atchet wrenches A L d d 2 a a 2 m m 2 mm mm mm mm mm mm mm mm g S 40847 4 x 7 200 26 30 0.5 2 4 5 0 0.00 40869 6 x 9 220 29 33 2 3 3 5.8 55 5 0.00 40879 7 x 9 220 30 33 2 3 4 5.8 5 0 0.00 40882 8 x 2 230 3.5 35.5 3 3.5 4.8 6.2 82 5 0.00 408922 9 x 22 230 33 37 3 5 5.8 7 92 5 0.00 4082224 22 x 24 245 37 40.5 5 6 7 8 25 5 0.00 4082427 24 x 27 270 40.5 44.5 6 7.5 8 20 30 5 0.00 4082736 27 x 36 300 42 54 6 9 20 27 44 5 0.00 4083032 30 x 32 300 48.5 50.5 20 22 22 24 455 5 0.00 Content No mm/" g 96400 240/5 0 mm - 3 /8"; mm - 7 /6"; 4 mm - 9 /6"; 7 mm - 2 /32"; 9 mm - 3 /4" 022 0.00 964002 240/6 8 mm - 5 /6"; 0 mm - 3 /8"; 3 mm - /2"; 4 mm - 9 /6"; 7 mm - 2 /32"; 9 mm - 3 /4" 094 0.00 24a I Double ended open ring spanners, angled A L d d 2 a a 2 m m 2 " mm mm mm mm mm mm mm g S 4483640 5/8 x 3 /4 220 29 33 2 3 2.7 5.8 48 5 0.00 4484048 3/4 x 235 33 40.2 3 6 5.8 9 99 5 0.00 4484452 7/8 x /8 250 37 44.4 5 7.5 7.5 2 253 5 0.00 4
25 atchet ring spanners P with bi-hexagon, straight, Fed. Spec. GGG-W-00405 (American sizes), chrome plated. 26 atchet ring spanners P reversible, with bi-hexagon, angled, chrome plated. 2 A L d d 2 a mm mm mm mm mm g S 430708 7 x 8 09 5 7 9 55 0.00 43090 9 x 0 39 20 23 9 80 0.00 430 0 x 70 26 30 2 44 0.00 4323 2 x 3 70 26 30 2 35 0.00 4345 4 x 5 70 26 30 2 26 0.00 4368 6 x 8 205 33 36 2 96 0.00 4379 7 x 9 205 33 36 2 88 0.00 4392 9 x 2 230 36 40 3 233 0.00 25aN as No 25, but made of solid steel. atchet ring spanners A L d d 2 a mm mm mm mm mm g S 440708 7 x 8 09 5 7 9 55 0.00 44090 9 x 0 39 20 23 9 80 0.00 440 0 x 70 26 30 2 44 0.00 4423 2 x 3 70 26 30 2 35 0.00 4445 4 x 5 70 26 30 2 26 0.00 4468 6 x 8 205 33 36 2 96 0.00 4479 7 x 9 205 33 36 2 88 0.00 4492 9 x 2 230 36 40 3 233 0.00 26a atchet ring spanners A L d d 2 a " mm mm mm mm g S 455620 /4 x 5 /6 09 5 7 9 55 0.00 4552428 3 /8 x 7 /6 39 20 23 9 80 0.00 4553234 /2 x 9 /6 70 26 30 2 26 0.00 A L d d 2 a " mm mm mm mm g S 456620 /4 x 5 /6 09 5 7 9 65 0.00 4562022 5/6 x /32 09 5 7 9 60 0.00 4562428 3/8 x 7 /6 39 20 23 9 90 0.00 4563234 /2 x 9 /6 74 26 30 2 64 0.00 4563638 5/8 x /6 205 33 36 2 257 0.00 4564044 3/4 x 7 /8 235 36 40 3 296 0.00 4564246 3/6 x 5 /6 235 36 40 2 28 0.00 4025 Single-end spanners, adjustable right-handed, DIN 37/ISO 6787, B shape, jaw offset 22, Chrome Vanadium, chrome plated. A L b a size max. mm mm mm mm g S 40250004 4 3 4 33 9.5 53 5 0.00 40250006 6 20 59 48 2 23 5 0.00 40250008 8 24 206 60 3.5 24 5 0.00 4025000 0 29 257 7 6 399 5 0.00 4025002 2 34 309 83 9 708 5 0.00 4025005 5 43 384 03 25 287 0.00 4025008 8 53 460 20 30 205 0.00 4026 Single-end spanners, adjustable left-handed, DIN 37/ISO 6787, A shape, jaw offset 5, Chrome-Vanadium, gun finish. Sets: atchet ring spanners Content No mm/" g 964302 25/4 9 x 0; 2 x 3; 4 x 5; 7 x 9 556 0.00 96430 25/7Pc 7 x 8; 9 x 0; 0 x ; 2 x 3; 4 x 5; 6 x 8; 7 x 9 049 0.00 9645602 25a/4N 3/8 x 7 /6; /2 x 9 /6; 5 /8 x /6; 3 /4 x 7 /8; 000 0.00 964560 25a/7PcN /4 x 5 /6; 5 /6 x /32; 3 /8 x 7 /6; /2 x 9 /6; 5 /8 x /6; 3/4 x 7 /8; 3 /6 x 5 /6 27 0.00 Standard packing: clear view wallet. Pc: in green plastic-wallet. 42 A L b a size max. mm mm mm mm g S 40260004 4 3 4 33 9.5 50 5 0.00 40260006 6 20 59 48 2 38 5 0.00 40260008 8 24 206 60 3.5 247 5 0.00 4026000 0 29 257 7 6 397 5 0.00 4026002 2 34 309 83 9 699 5 0.00 4026005 5 43 384 03 25 324 0.00 4026008 8 53 460 20 30 2076 0.00
/4 6,3 DIN 320 ISO 74-40D f Sockets P Q metric sizes: DIN 324/ISO 2725-, E DIN EN 3709, ASME B 07.5M, American sizes: ASME B 07., Fed. Spec. GGG-W-64, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated. 40aD/0CL P Q Content: 3/6; 7 /32; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6" clip strip No 40CL-2 Set: Sockets with clip strip 3 A d d 2 d 3 L t t 2 mm mm mm mm mm mm mm g S 0030005 5 7.9 0.7 4 23 4.5 5 9 0 0.00 0030055 5.5 8.5 0.7 4.5 23 6 5 9 0 0.00 0030006 6 9.2 0.7 5 23 6 5 9 0 0.00 0030007 7 0.7 0.7 6 23 6.5 3.4 0 0 0.00 0030008 8.6.6 7 23 8 3. 0 0.00 0030009 9 2.8 2.8 8 23 8 2.8 3 0 0.00 003000 0 4.3 4.3 9 23 8 4.9 7 0 0.00 00300 5.5 5.5 0 23 9 4.6 9 0 0.00 003002 2 6.5 6.5 23 9.5 4.3 23 0 0.00 003003 3 7.8 7.8 2 23 9.5 4 25 0 0.00 003004 4 8.8 8.8 3 24 0 4.7 32 0 0.00 40aD f Sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 053000 5/32 6.7 0.7 3.2 23 3.5 5 7 0 0.00 053002 3/6 7.6 0.7 4 23 4.5 5 9 0 0.00 053004 7/32 8.6 0.7 5 23 6 5 9 0 0.00 053006 /4 9.4 0.7 5.5 23 6 5 9 0 0.00 053008 9/32 0.7 0.7 6.6 23 6.5 3.2 0 0 0.00 0530020 5/6.6.6 7 23 8 3. 0 0.00 0530022 /32 2.7 2.7 8. 23 8 3.3 3 0 0.00 0530024 3/8 3.7 3.7 8.3 23 8 3.3 6 0 0.00 0530028 7/6 5.8 5.8 0 23 9 4.6 2 0 0.00 0530032 /2 7.3 7.3.5 23 9.5 4. 27 0 0.00 0530034 9/6 8.8 8.8 3. 24 0 4.7 3 0 0.00 STAHLWILLE AS-Drive STAHLWILLE sockets are equipped with the AS Drive* profile: this permits high transmission of forces to the lands of nuts and bolts without damaging them. No longer will you have to worry about stripping the corners off nuts and bolts. *Anti-Slip Drive g 960530 206 0.00 40 e Sockets P Q metric sizes: DIN 324/ISO 2725-, ASME B 07.5M, E DIN EN 3709 (test loads), American sizes: ASME B 07., Fed. Spec. GGG-W-64, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated. t t 2 d3 A d d 2 d 3 L t t 2 mm mm mm mm mm mm mm g S 000032 3.2 5.6 0.7 2.5 23 2 5 8 0 0.00 000035 3.5 6 0.7 2.5 23 2.5 5 8 0 0.00 000004 4 6.7 0.7 3.2 23 3.5 5 9 0 0.00 000045 4.5 7.3 0.7 3.7 23 4 5 9 0 0.00 000005 5 7.9 0.7 4 23 4.5 5 9 0 0.00 000055 5.5 8.5 0.7 4.5 23 6 5 9 0 0.00 000006 6 9.2 0.7 5 23 6 5 9 0 0.00 000007 7 0.7 0.7 6 23 6.5 3.4 0 0 0.00 000008 8.6.6 7 23 8 3. 0 0.00 000009 9 2.8 2.8 8 23 8 2.8 4 0 0.00 00000 0 4.3 4.3 9 23 8 4.9 7 0 0.00 0000 5.5 5.5 0 23 9 4.6 9 0 0.00 00002 2 6.5 6.5 23 9.5 4.3 24 0 0.00 00003 3 7.8 7.8 2 23 9.5 4 26 0 0.00 00004 4 8.8 8.8 3 24 0 4.7 32 0 0.00 40a e Sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 04000 5/32 6.7 0.7 3.2 23 3.5 5 9 0 0.00 04002 3/6 7.6 0.7 4 23 4.5 5 9 0 0.00 04004 7/32 8.6 0.7 5 23 6 5 9 0 0.00 04006 /4 9.4 0.7 5.5 23 6 5 9 0 0.00 04008 9/32 0.7 0.7 6.6 23 6.5 3.2 0 0 0.00 040020 5/6.6.6 7 23 8 3. 2 0 0.00 040022 /32 2.7 2.7 8. 23 8 3.3 4 0 0.00 040024 3/8 3.7 3.7 8.3 23 8 3.3 6 0 0.00 040028 7/6 5.8 5.8 0 23 9 4.6 2 0 0.00 040032 /2 7.3 7.3.5 23 9.5 4. 27 0 0.00 040034 9/6 8.8 8.8 3. 24 0 4.7 3 0 0.00 46
/4 6,3 DIN 320 ISO 74-40DL f Sockets P Q extra deep, metric sizes: E DIN EN 370, E DIN EN 3709, DIN 324/ISO 2725-, ASME B 07.5M American sizes: ASME B 07., Fed. Spec. GGG-W-64, SAE AS 954-E, HPQ high performance steel, chrome plated. 40aDL/7 P Q extra deep Content: 3/6; /4; 5 /6; 3 /8; 7 /6; /2; 9 /6" Set: Sockets A d d 2 d 3 L t t 2 mm mm mm mm mm mm mm g S 0240005 5 7.9 0.7 4 50 4.5 42 8 5 0.00 0240055 5.5 8.5 0.7 4.5 50 6 42 6 5 0.00 0240006 6 9.2 0.7 5 50 6 42 8 5 0.00 0240007 7 0.7 0.7 6 50 6.5 40.9 2 5 0.00 0240008 8.6.6 7 50 8 40. 23 5 0.00 0240009 9 2.8 2.8 8 50 8 39.8 30 5 0.00 024000 0 4.3 4.3 9 50 9 4.9 35 5 0.00 02400 5.5 5.5 0 50 0.5 4.6 40 5 0.00 024002 2 6.5 6.5 50 2 4.3 47 5 0.00 024003 3 7.8 7.8 2 50 2 4 50 5 0.00 024004 4 8.8 8.8 3 50 5 40.7 57 5 0.00 40aDL f Sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 064000 5/32 6.7 0.7 3.2 50 4.5 42 3 5 0.00 064002 3/6 7.6 0.7 4 50 4.5 42 5 5 0.00 064004 7/32 8.6 0.7 5 50 6 42 6 5 0.00 064006 /4 9.4 0.7 5.2 50 6 42 9 5 0.00 064008 9/32 0.7 0.7 6.5 50 8 40.2 20 5 0.00 0640020 5/6.6.6 7 50 8 40. 24 5 0.00 0640022 /32 2.7 2.7 8. 50 9 39.7 26 5 0.00 0640024 3/8 3.7 3.7 8.3 50 9 39.7 33 5 0.00 0640028 7/6 5.8 5.8 0 50 0.5 4.6 42 5 0.00 0640032 /2 7.3 7.3.5 50 2 4. 44 5 0.00 0640034 9/6 8.8 8.8 3. 50 5 40.7 55 5 0.00 STAHLWILLE HPQ inserts STAHLWILLE HPQ* sockets are manufactured from selected tough steel alloys. The result: they are extremely durable. HPQ sockets are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners as used e.g. in the aerospace industry, where safety is a crucial factor. *High Performance Quality g 960640 24 0.00 packed in carton 40aDL/0CL Set: Sockets with clip strip P Q Content: 3/6; 7 /32; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6" clip strip No 40CL-2 g 960640 350 0.00 40aDV f Sockets P Q SAE AS 954, S.B.A.C. AS 40605/40606, HPQ high performance steel, chrome plated. A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 065004 7/32 8.6 0.7 5 3.8 6 23.8 2 0 0.00 065006 /4 9.4 0.7 5.2 3.8 6 23.8 3 0 0.00 065008 9/32 0.7 0.7 6.6 3.8 6.5 22 3 0 0.00 0650020 5/6.6.6 7 3.8 8 2.9 5 0 0.00 3 47
/4 6,3 DIN 320 ISO 74-402 f UNIFLEX sockets P Q American sizes: SAE AS 954, ASME B 07., HPQ high performance steel, chrome plated. 40aSP h Sockets spline-drive Q MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated. 3 A d d 2 d 3 L t t 2 mm mm mm mm mm mm mm g S 040006 6 9.2 2.7 5 32 5.5 0 6 5 0.00 040007 7 0.4 2.7 6 33.5 6.5 6 5 0.00 040008 8.6 2.7 6.7 35 8 3 7 5 0.00 040009 9 3 2.7 8 36 8 2 20 5 0.00 04000 0 4.2 2.7 9 38 2 4 38 5 0.00 402a f UNIFLEX sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 054004 7/32 8.6 2.7 4.8 32 5.5 0 7 5 0.00 054006 /4 9.6 2.7 5.2 32 5.5 0 6 5 0.00 054008 9/32 2.7 6.4 32 6.5 0 9 5 0.00 0540020 5/6.6 2.7 6.7 35 8 3 7 5 0.00 0540022 /32 2.7 2.7 8 35 7.5.5 9 5 0.00 0540024 3/8 3.6 2.7 9 38 8.6 3. 20 5 0.00 0540028 7/6 5.7 2.7 0.5 39.5 0.7 5 23 5 0.00 0540032 /2 7.3 2.7 2 4.5. 6.5 27 5 0.00 402a/5 P Q Content: /4; 5 /6; 3 /8; 7 /6; /2" Set: UNIFLEX sockets Spline A d d 2 d 3 L t t 2 size " mm mm mm mm mm mm g S 00007 7 7/32 8.6 0.7 5 22.2 6 4.2 7 0.00 00008 8 /4 9.5 0.7 5.6 22.2 7 4.2 0 0.00 00009 9 9/32.2.2 6.6 22.2 8 2.4 0 0.00 0000 0 5/6.6.6 7. 22.2 8 2.2 2 0.00 0002 2 3/8 3.8 3.8 8.6 23 8.7 2.6 8 0.00 0004 4 7/6 5.7 5.7 0.4 25 0.7 4. 24 0.00 40aLSP h Sockets spline-drive Q extra deep bolt clearance, MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated. Spline A d d 2 d 3 L t t 2 size " mm mm mm mm mm mm g S 002007 7 7/32 8.6 0.7 5 50.8 6 42.8 8 0.00 002008 8 /4 9.5 0.7 5.6 50.8 8 42.8 24 0.00 00200 0 5/6.6.6 7. 50.8 8 40.8 27 0.00 402aSP h Uniflex sockets spline-drive Q MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated. g 960540 0 0.00 402aK f UNIFLEX sockets P Q short version, HPQ high performance steel, chrome plated. Spline A d d 2 d 3 L t t 2 size " mm mm mm mm mm mm g S 054206 8 /4 9.5 2.7 5.6 32 6.4 9.8 6 5 0.00 0542020 0 5/6.6 2.7 7. 35 8 3 8 5 0.00 4 r Screwdriver sockets for slotted screws, blades to DIN 5264, Chrome Alloy Steel, chrome plated. A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 054024 3/8 3.6 2.7 6.7 34 9. 2.0 8 5 0.00 054034 9/6 9 2.7 3. 37.5 0.3.8 25 5 0.00 48 r L L 2 d a b mm mm mm mm mm mm g S 0040005 0.5x3 82 57.6 0.5 3 20 5 0.00 0040006 0.6x3.5 82 57.6 0.6 3.5 3 5 0.00 0040008 0.8x4 82 57.6 0.8 4 32 5 0.00 004000 x5.5 82 57.6 5.5 32 5 0.00 004002.2x8 82 57 4.2 8 45 5 0.00
/4 6,3 DIN 320 ISO 74-4K r Screwdriver sockets for slotted screws, blades to DIN 5264, Chrome Alloy Steel, chrome plated. 44PZ l Screwdriver sockets for POZIDIV/SUPADIV screws, Chrome Alloy Steel, chrome plated. r L L 2 d a b mm mm mm mm mm mm g S 0280006 0.6x3.5 28 6.6 0.6 3.5 9 5 0.00 0280008 0.8x4 28 6.6 0.8 4 0 5 0.00 028000 x5.5 28 6.6 5.5 5 0.00 028002.2x8 28 6.6.2 8 2 5 0.00 028006.6x0 28 6.6.6 0 4 5 0.00 44 i INHEX sockets for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated. PZ L L 2 d size mm mm mm g S 030000 28 6.6 0 5 0.00 0300002 2 28 6.6 5 0.00 40CL for socket retention, with 9 or 0 retaining clips. Supplied without sockets. Clip strips 3 B L L 2 d mm mm mm mm g S 0050025 2.5 55 30 0.7 4 5 0.00 0050003 3 55 30 0.7 4 5 0.00 0050004 4 55 30 0.7 6 5 0.00 0050005 5 55 30 0.7 20 5 0.00 0050006 6 55 30.6 26 5 0.00 44a i INHEX sockets B L L 2 d " mm mm mm g S 0450004 /6 55 30 0.7 5 0.00 0450005 5/64 55 30 0.7 2 5 0.00 0450006 3/32 55 30 0.7 4 5 0.00 0450007 7/64 55 30 0.7 7 5 0.00 0450008 /8 55 30 0.7 2 5 0.00 0450009 9/64 55 30 0.7 3 5 0.00 045000 5/32 55 30 0.7 4 5 0.00 045002 3/6 55 30 0.7 7 5 0.00 045004 7/32 55 30 0.7 9 5 0.00 045006 /4 55 30.6 24 5 0.00 44P k Screwdriver sockets for recessed head screws Phillips-ecess, tips to DIN 5260, Chrome Alloy Steel, chrome plated. L size mm g S 8040000 200 36 5 0.00 80400002 2 300 52 5 0.00 Drive tools and accessories /4" u, finish: Chrome Alloy Steel, chrome plated. 4 reversible, 60 teeth, for use in confined spaces, re-engages after movement of 6, DIN 322/ISO 335. atchet, fine tooth L b a mm mm mm g S 2300 8 24 9.5 87 0.00 45 reversible, 22 teeth, DIN 322/ISO 335. atchet PH L L 2 d size mm mm mm g S 029000 28 6.6 0 5 0.00 0290002 2 28 6.6 5 0.00 0290003 3 28 6.6 2 5 0.00 0290004 4 28 6.6 4 5 0.00 L b a mm mm mm g S 000 7 22 2.5 76 5 0.00 49
/4 6,3 DIN 320 ISO 74-3 45Q Üü reversible, 22 teeth, with Quickelease safety locks and 2-component handles, DIN 322/ISO 335. 45SG-Q Üü Quickelease ratchet reversible, 22 teeth, with Quickelease safety locks and steel handle, DIN 322/ISO 335. L b a mm mm mm g S 0030 7 22 2.5 90 0.00 45QL Üü long, reversible, 22 teeth, with Quickelease safety locks and 2-component handles. Quickelease ratchet L b a mm mm mm g S 0020 7 22 2.5 79 0.00 45Q/2 Üü Content: atchet 45 Q Extension 405/2Q, 54 mm Extension 405/6Q, 50 mm 45SK atchet reversible, slim handle, 22 teeth, DIN 322/ISO 335. Quickelease set g S 9602 272 0.00 L b a mm mm mm g S 2000 7 22 2.5 75 5 0.00 Quickelease ratchet 45SGB 400 DIN 322/ISO 335. 400 Drall Drive handle L mm g S 05000 50 70 5 0.00 400Q Üü Bit ratchet reversible, 22 teeth, with steel handle and inside hexagon, /4," DIN 326/ISO 73 D 6.3 for Bits Screwdriver sockets /4". Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). L b a mm mm mm g S 300 7 22 2 85 5 0.00 46 reversible, 60 teeth, handle may be raised or lowered by approx. 90. Lockable in following positions: straight, 30 up, 60 up, 30 down. Unlocked by depressing button in handle, registered design. DIN 322/ISO 335, with Quickelease safety locks. Drive handle with /4" square drive in end of handle, DIN 322/ISO 335. Flexible joint ratchet L b a mm mm mm g S 26000 70 25 9.5 232 0.00 Quickelease drive handle L mm g S 0500 50 75 0.00 L b a mm mm mm g S 053 53 22 2.5 96 0.00 L mm g S 0500 50 0 5 0.00 40 Drive handle flexible shaft (right hand rotation only), maximum torque 5 N m. L mm g S 050002 230 20 5 0.00 50
/4 6,3 DIN 320 ISO 74-403 DIN 322/ISO 335. Flexible handle L mm g S 06000 54.5 70 5 0.00 405Q Quickelease extensions Üü DIN 323/ISO 336. 404 DIN 322/ISO 335. Sliding T-handle L mm g S 070000 6 38 5 0.00 404Q Üü with Quickelease safety locks. Quickelease sliding T-handle L mm g S 07000 6 52 0.00 43 with steel handle, working radius 70 mm. Speeder brace L d size mm mm g S 000 2 54.6 28 0.00 0002 6 50.6 65 0.00 0005 4 356.6 50 0.00 406 (right hand rotation only) maximum torque 5 N m. Extension, flexible L d mm mm g S 040000 52.6 6 5 0.00 407 DIN 323/ISO 336. Universal joint 3 L mm g S 0000 440 352 0.00 405 DIN 323/ISO 336. Extensions L d size mm mm g S 0000 2 54.6 29 5 0.00 00006 4 00.6 46 5 0.00 00002 6 50.6 65 5 0.00 0000 0 254.6 5 0.00 0004 4 356.6 55 0.00 405W swivel angle 8 each side, max. torque 40 N m. Extensions with wobble-drive L d mm mm g S 020000 37 2.8 23 5 0.00 407Q Üü with Quickelease safety locks. Quickelease universal joint L d mm mm g S 02000 45 3 35 0.00 L d size mm mm g S 000 2 54.6 28 0.00 0006 4 00.6 45 0.00 0002 6 50.6 55 0.00 00020 0 254.6 0 0.00 00024 4 356.6 55 0.00 5
/4 6,3 DIN 320 ISO 74-3 409 Adaptor Q /4" socket x 3 /8" plug (6.3 X 0), DIN 323/ISO 336, HPQ high performance steel. L d mm mm g S 030002 25 2.8 8 5 0.00 409M/432M Set adaptors, 3 pieces /54M/3 /4" socket x 3 /8" plug, 3/8" socket x /2" plug, /2" socket x 3 /4" plug. g S 962002 20 0.00 409M /4" socket x 3 /8" plug (6.3 x 0 mm). Adaptor L O mm mm g S 03000 3 25 4 0.00 40 Adaptor Q /4" socket x /2" plug (6.3 x 2.5), HPQ high performance steel. 42-4008 Bit holder Q c /4" inside hexagon, DIN 326 form D 6.3/ ISO 73 form D 6.3. Outer w 0 mm for use in tools with 0 mm internal hex drive or internal double hexagon (e.g. "FLEXI" double-ended flexi-joint spanners, T-handle universal joint spanners, box spanners, ratchet ring spanners etc.) Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). HPQ high performance steel. outside L d E mm mm g S 80020 0 mm 20.6 5 0.00 47/ with hexagon key wrench No 0760aCV 3 /32". Locking adaptor L d mm mm g S 96270 42 3 23 0.00 atcheting bit holder Positions selectable are clockwise/anticlockwise/fixed with fixed blade. Inner hex. with magnet, for /4" screwdriver bits with outside hexagon /4" DIN 326/ISO 73 Form C 6.3. The square drive extension No 35/ can be used to adapt /4" socket inserts (outer hex. to /4" outer square). The ratcheting bit holder is fitted with a quick-twist knurled socket to allow the user to tighten or untighten loosely by hand. Socket mountings are toothed, heavy-duty and angled at 30. Ergonomically shaped handle with /4" inner square drive, for use with cross-handle, extension bar etc. L d mm mm g S 030003 28 6.5 36 5 0.00 42 Bit holder Q c /4" inside hexagon, DIN 326 form D 6.3/ ISO 73 form D 6.3. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). HPQ high performance steel. L d mm mm g S 8000 25.6 5 5 0.00 inside L L 2 d b " mm mm mm g S 820000 D 6.3 /4 56 206.5 0 85 8 0.00 inside b DIN 326/ISO 73 4008/8 9 pieces Content: atcheting bit holder No 4008 3 Bits k 22; 222; 223 3 Bits l PZ 22; PZ 222; PZ 223 6 Bits o 440 T0; 44 T5; 442 T20; 443 T25; 445 T30; 446 T40 3 Bits i 30; 302; 303 3 Bits r 63 0.6 x 4.5; 65 0.8 x 5.5; 66/.2 x 6.5 mm atcheting bit holder set g S 968200 785 0.00 52
/4 6,3 DIN 320 ISO 74-4008/27/ atcheting bit holder set 29 pieces Content: atcheting bit holder No 4008 3 Bits k 22; 222; 223 3 Bits l PZ 22; PZ 222; PZ 223 6 Bits o 440 T0; 44 T5; 442 T20; 443 T25; 45 T30; 446 T40 3 Bits i 30; 302; 303 3 Bits r 63 0.6 x 4.5; 65 0.8 x 5.5; 66/.2 x 6.5 mm Square drive extension No 35/ with /4" outer hex. and outer square drives for attaching /4" u sockets 9 Sockets No 40, /4" u sizes 4; 5; 5.5; 6; 7; 8; 0; ; 3 mm g S 968202 025 0.00 Tools for Hi-Lok bolts 40aD/8/H Socket set for Hi-Lok bolts. Content: 5 Sockets with bi-hexagon No 40aD: sizes 7 /32; /4; 5 /6; /32; 3 /8" 3 Offset Screwdrivers No 0759a: /6; 5 /64; 3 /32" atchet No 45SGH g S 9605303 425 0.00 45SGH atchet reversible, 22 teeth, patented, axially drilled pinion, locking facility for sockets. For use on Hi-Lok bolts in the aerospace industry 0759a Offset screwdrivers B L size " mm g S 43560004 2 /6 50 5 5 0.00 43564004 4 /6 00 8 5 0.00 43560005 2 5/64 50 5 5 0.00 43564005 4 5/64 00 8 5 0.00 43560006 2 3/32 50 5 5 0.00 43564006 4 3/32 00 8 5 0.00 40D/23/7 Socket set /4" u In sturdy sheet steel case, 30 pieces Content: 2 sockets with bi-hexagon No 40D: sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 0; ; 2; 3 mm 4 INHEX sockets No 44: sizes 3; 4; 5; 6 mm 3 bits k No 22: size ; No 222: size 2; No 223: size 3 4 Bits r 62: 0.6 x 3.5 mm; 64: 0.8 x 4 mm; 66: x 5.5 mm; 68:.6 x 8 mm ratchet No 45 2 extensions No 405/2 (54 mm), No 405/6 (50 mm) universal joint No 407 drive handle No 400 T-handle No 404 bit-holder No 42 g 9600305 380 0.00 40D/23/6 Socket set /4" u In sturdy sheet steel case, 29 pieces Content: sockets with bi-hexagon No 40D: sizes 5; 5.5; 6; 7; 8; 9; 0; ; 2; 3; 4 mm 3 screwdriver sockets r No 4K: sizes 0.6 x 3.5;.0 x 5.5;.2 x 8 mm 5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm 4 screwdriver sockets k No 44P: sizes ; 2; 3; 4 ratchet No 45 2 extensions No 405/2 (54 mm), No 405/6 (50 mm) universal joint No 407 drive handle No 400 T-handle No 404 3 L b a mm mm mm g S 0002 7 22 2.5 90 5 0.00 0759 with hexagon end for atchet No 45SGH, patent. ound shaft on Screwdriver enables locking of ball retainer. Offset screwdrivers g 9600306 20 0.00 B L size mm mm g S 43062002 2 2 50 5 5 0.00 43064002 4 2 00 8 5 0.00 53
/4 6,3 DIN 320 ISO 74-3 40a/9/4 40aD/9/4 Socket set /4" u In sturdy sheet steel case, 3 pieces Content: 9 sockets with bi-hexagon No 40aD: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2" ratchet No 45 2 extensions No 405/2 (54 mm), No 405/6 (50 mm) universal joint No 407 g 9605302 830 0.00 40ma/25/8 Socket set /4" u In sturdy sheet steel case, 3 pieces Content: 9 sockets with hexagon No 40a: sizes 3 /6; 7 /32; /4; 9 /32; 5 /6; /32; 3/8; 7 /6; /2" ratchet No 45 2 extensions No 405/2 (54 mm), No 405/6 (50 mm) universal joint No 407 g 960407 920 0.00 Socket set /4" u In sturdy sheet steel case, 33 pieces Content: 25 sockets with hexagon No 40: sizes 3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 0; ; 2; 3; 4 mm No 40a: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" ratchet No 45 2 extensions No 405/2 (54 mm), No 405/6 (50 mm) extension, flexible No 406 (52 mm) universal joint No 407 drive handle No 400 flexible handle No 403 T-handle No 404 40aD/0/8 Socket set /4" u In sturdy sheet steel case, 8 pieces Content: 0 sockets with bi-hexagon No 40aD: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" ratchet No 45SG-Q 3 extensions No 405/2 (54 mm), No 405/4 (00 mm), No 405/6 (50 mm) universal joint No 407 drive handle No 400 bit-holder No 42 locking adaptor No 47/ g 9605306 064 0.00 40aD/25/8 Socket set /4" u In sturdy sheet steel case, 33 pieces Content: 0 sockets with bi-hexagon No 40aD: sizes 3 /6; 7 /32; /4; 9 /32; 5/6; /32; 3 /8; 7 /6; /2; 9 /6" 0 sockets with bi-hexagon, long, No 40aDL: sizes 3 /6; 7 /32; /4; 9 /32; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6" 5 UNIFLEX sockets with bi-hexagon No 402a: sizes /4; 5 /6; 3 /8; 7 /6; /2" ratchet No 45SG-Q 3 extensions No 405/2 (54 mm), No 405/4 (00 mm), No 405/6 (50 mm) universal joint No 407 drive handle No 400 bit-holder No 42 locking adaptor No 47/ g 9605305 2322 0.00 g 960062 2070 0.00 54
3/8 0 DIN 320 ISO 74-45 f Sockets P Q metric sizes: DIN 324/ISO 2725-, ASME B 07.5M, E DIN EN 3709, American sizes: ASME B 07., Fed. Spec. GGG-W-64, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated. 460a f Sockets P Q SAE AS 954-E, S.B.A.C. AS 4060/406, ASME B 07., HPQ high performance steel, chrome plated. d 3 t t 2 A d d 2 d 3 L t t 2 mm mm mm mm mm mm mm g S 0200007 7 0.5 6.5 6 24 6 2.5 9 0 0.00 0200008 8.7 6.5 7 25 7 3.5 9 0 0.00 0200009 9 3 6.5 8 25 7 3.5 9 0 0.00 020000 0 4.3 6.5 9 27 8.5 5.5 20 0 0.00 02000 5.6 6.5 0 27 8.5 3.7 2 0 0.00 020002 2 6.9 7.5 28 9.5 4.4 24 0 0.00 020003 3 8 7.5 2 30.5 6. 25 0 0.00 020004 4 9.4 7.5 3 30.5 5.8 28 0 0.00 020005 5 20.6 9 4 3 2.5 9.2 30 0 0.00 020006 6 2.7 9 5 3 3.5 8.9 33 0 0.00 020007 7 23 9 6 3 2.5 8.6 37 0 0.00 020008 8 24.2 9 7 32 3.5 9.3 39 5 0.00 020009 9 25.2 9 8 32 3.5 9 39 5 0.00 0200020 20 26.2 20 9 34 5.5 20.7 5 5 0.00 020002 2 27.7 2 20 34 5.5 20.5 53 5 0.00 0200022 22 28.7 2 2 35 7 2.2 6 5 0.00 0200024 24 3.5 24 2 35 8 2.2 92 5 0.00 45a f Sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 024006 /4 9.7 6.5 5.2 24 6 2.5 8 0 0.00 0240020 5/6.7 6.5 7 25 7 3.5 9 0 0.00 0240022 /32 2.5 6.5 8. 25 7 3.5 9 0 0.00 0240024 3/8 3.7 6.5 8.4 27 8.5 5.5 20 0 0.00 0240028 7/6 5.7 6.5 0 28 9.5 5. 20 0 0.00 0240032 /2 8 7.5.5 30.5 6.5 24 0 0.00 0240034 9/6 20.2 9 3. 3 2.7 6.8 28 0 0.00 0240035 9/32 20.6 9 4 3 3 9.2 36 5 0.00 0240036 5/8 2.7 9 5 3 3.5 8.9 3 5 0.00 0240038 /6 23.4 9 6.3 32 4.7 9.5 34 5 0.00 0240040 3/4 25.2 9 8 32 5.9 9 4 5 0.00 0240042 3/6 27.2 20.5 9.4 34 6.5 20.5 52 5 0.00 0240044 7/8 28.7 22 2 35 8 2 59 5 0.00 0240046 5/6 3.5 24 22.6 35 8.5 20.7 95 5 0.00 0240048 33 25.5 24.2 35 8.5 20.2 97 5 0.00 456EF e Socket for removing the Brake Swivel Sleeve Nut, max. load 70 Nm, Chrome Alloy Steel, chrome plated. A d d 2 d 3 L t t 2 mm mm mm mm mm mm mm g S 020050 50 59.5 32 33 54 2 35.7 420 0.00 A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 0262006 /4 9.9 6.5 5.2 32 7 20.5 2 5 0.00 02620020 5/6.5 6.5 7 32 8.5 20.5 22 5 0.00 02620024 3/8 3.7 6.5 8.5 38 9 26.5 29 5 0.00 02620028 7/6 5.7 6.5 0 38 24.5 33 5 0.00 02620032 /2 7.5 7.8.5 44 2 30 44 5 0.00 46 46a f Sockets P Q extra deep, metric sizes: DIN 324/ISO 2725-, E DIN EN 370, E DIN EN 3709, ASME B 07.5M, American sizes: ASME B 07., Fed. Spec. GGG-W-64, SAE AS 954-E, HPQ high performance steel, chrome plated. t t 2 d 3 A d d 2 d 3 L t t 2 mm/" mm mm mm mm mm mm g S 02020008 8.7 6.5 7 54 9 42.5 36 0 0.00 0202000 0 4.3 6.5 9 54 20 42.5 4 0 0.00 020200 5.6 6.5 0 54 20 40.7 5 0 0.00 0202002 2 6.9 7.5 54 20 40.4 57 0 0.00 0202003 3 8 7.5 2 54 20 40. 6 0 0.00 0202004 4 9.4 7.5 3 60 25 45.8 75 0 0.00 0202005 5 20.6 9 4 60 25 48.2 85 0 0.00 0202006 6 2.7 9.5 5 60 25 47.9 8 0 0.00 0202007 7 23 2 6 65 30 52.6 97 0 0.00 0202008 8 24.2 22 7 65 30 52.3 2 0 0.00 0202009 9 25.2 23 8 65 30 52 2 0 0.00 02020208 20.8-3 /6 ) 27.2 25-65 8-5 0 0.00 0202002 2 27.7 25.5 20 65 30 5.5 37 5 0.00 02020022 22 28.7 26.5 2 65 30 5.2 78 5 0.00 ) with rubber insert for spark plugs f Sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 0242006 /4 9.7 6.5 5.2 54 9 42.5 33 5 0.00 02420020 5/6.7 6.5 7 54 9 42.5 35 5 0.00 02420024 3/8 3.7 6.5 8.4 54 20 42.5 45 5 0.00 02420028 7/6 5.7 6.5 0 54 20 40.7 53 5 0.00 02420032 /2 8 7.5.5 54 20 40.2 64 5 0.00 02420034 9/6 20.2 9 3. 60 25 45.8 66 5 0.00 02420035 9/32 20.6 9 4 60 25 48.2 84 5 0.00 02420036 5/8 2.7 9.5 5 60 25 47.9 8 5 0.00 02420038 /6 23.4 2.5 6.3 65 30 52.5 4 5 0.00 02420040 3/4 25.2 23 8 65 30 52 37 5 0.00 02420042 3/6 27.2 25 9.4 65 30 5.6 30 5 0.00 02420044 7/8 28.7 26.5 2 65 30 5.2 84 5 0.00 02420046 5/6 3.5 29 22.6 65 30 50.7 95 5 0.00 02420048 33 3 24.2 65 30 50.2 205 5 0.00 3 55
3/8 0 DIN 320 ISO 74-47 f UNIFLEX sockets P Q SAE AS 954-E (American sizes), HPQ high performance steel, chrome plated. 45aPSP h Socket spline-drive Q MS-33787, MIL-W-8982, for disassembling jet engines, series CFM 56, HPQ high performance steel, gun finish. 3 A d d 2 d 3 L t t 2 mm mm mm mm mm mm mm g S 0204000 0 4.3 7.5 9 45.5 7 2 5 0.00 020400 5.6 7.5 0 47.5 4 55 0.00 0204002 2 6.9 7.5 48 4.5 54 0.00 0204003 3 8.3 7.5 2 48 2 4.5 53 0.00 0204004 4 9.4 7.5 3 48.5 3 4.5 55 0.00 0204005 5 20.6 7.5 4 48.5 3 4.5 56 0.00 0204006 6 2.8 7.5 5 5.5 4 7 58 0.00 0204007 7 23 7.5 6 53.5 5 8.5 63 0.00 0204008 8 24.2 7.5 7 54.5 6 8.5 6 0.00 0204009 9 25.5 7.5 8 57 6 2 68 0.00 47a 45aSP f UNIFLEX sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 02440020 5/6.7 7.5 7 45.5 7 2.5 50 0.00 02440024 3/8 3.7 7.5 8.5 45.5 7 2 50 0.00 02440028 7/6 5.8 7.5 0 47.5 4 54 0.00 02440032 /2 8.3 7.5.5 47.5.5 4 57 0.00 02440034 9/6 9.7 7.5 3. 48.5 3 4.5 55 0.00 02440036 5/8 2.6 7.5 5 5.5 4 7 59 0.00 02440038 /6 23.5 7.5 6.3 53.5 6 8.5 58 0.00 02440040 3/4 25.5 7.5 8 57 6 2 67 0.00 h Sockets spline-drive Q MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated. Spline A d d 2 d 3 L t t 2 size " mm mm mm mm mm mm g S 2240028 4 7/6 8.8 8.8 0.4 28 4.5 36 0 0.00 46aSP h Sockets spline-drive Q extra deep bolt clearance, MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated. Spline A d d 2 d 3 L t t 2 size " mm mm mm mm mm mm g S 020202 2 3/8 3.7 6.5 8.6 54 9 42.5 52 0.00 020204 4 7/6 6 7.3 0.4 54 42.5 63 0.00 45aP f Socket P Q ASME B 07., Fed. Spec. GGG-W-64, SAE AS 954-E (test loads), for disassembling jet engines, series CFM 56, HPQ high performance steel, gun finish. d 3 t t 2 Spline A d d 2 d 3 L t t 2 size " mm mm mm mm mm mm g S 02002 2 3/8 3.7 6.5 8.6 26.5 9 5 24 0.00 02004 4 7/6 6 7.3 0.4 28 4.5 37 0.00 02006 6 /2 8 8.3 2.2 28.5 4 28 0.00 A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 02430020 5 /6.9 6.5 8. 25 7 3.5 9 0 0.00 46aP f Socket P Q Plastic coating protects sensitive alloy wheels, HPQ high performance steel, chrome plated. L d d 3 d2 t t 2 A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 22420024 3 /8 6.5 6.5 8.4 54 20 42.5 44 0.00 56
3/8 0 DIN 320 ISO 74-49 i INHEX sockets for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated. 440 COW-ING spanners P Caution! Modified settings on torque wrench (refer to note on page 20). Chrome Alloy Steel, chrome plated. B L L 2 d mm mm mm mm g S 02050003 3 52 20 7.8 38 5 0.00 02050004 4 52 20 7.8 40 5 0.00 02050005 5 52 20 7.8 44 5 0.00 02050006 6 52 20 7.8 46 5 0.00 02050007 7 52 20 7.8 5 5 0.00 02050008 8 52 20 7.8 55 5 0.00 0205000 0 52 20 7.8 62 5 0.00 49a i INHEX sockets B L L 2 d " mm mm mm g S 02450008 /8 52 20 7.8 40 5 0.00 02450009 9/64 52 20 7.8 40 5 0.00 0245000 5/32 52 20 7.8 40 5 0.00 0245002 3/6 52 20 7.8 44 5 0.00 0245004 7/32 52 20 7.8 46 5 0.00 0245006 /4 52 20 7.8 48 5 0.00 02450020 5/6 52 20 7.8 55 5 0.00 02450024 3/8 52 20 7.8 6 5 0.00 A a L b a S W mm " mm mm mm mm mm g S 090008 8 /4 23.8 2.7 8 2.3 6.3 0.00 090009 9 /4 28.5 8.2 3.5 4 6.7 2 0.00 09000 0 ) /4 28.4 8.2 3.5 4 7. 6 0.00 0900 /4 28 8.2 3.5 4 8.6 7 0.00 09002 2 ) /4 30.8 20.6 4 5.7 9 20 0.00 09003 3 /4 32 22.2 4 6.4 0 20 0.00 09004 4 ) /4 3.7 22.2 4 6.4. 20 0.00 029005 5 3/8 36.5 24.6 7.5 9..9 34 0.00 029006 6 3/8 36. 24.6 7.5 9. 3 27 0.00 029007 7 2 ) 3/8 39.2 27.3 7.5 20.5 4 40 0.00 029008 8 3/8 40.8 29 8.5 2.3 4.8 45 0.00 029009 9 2 ) 3/8 40.5 29 8.5 2.3 5.8 40 0.00 0290020 20 3/8 42.9 3.3 8.5 22.5 5.8 54 0.00 029002 2 3/8 42.8 3.3 8.5 22.5 6.2 45 0.00 0290022 22 2 ) 3/8 45.3 33.5 9 23.6 7 57 0.00 0290023 23 3/8 47.5 35.7 9.5 24.6 7.5 7 0.00 0290024 24 2 ) 3/8 47.3 35.7 9.5 24.6 8 57 0.00 0290025 25 3/8 49.3 37.7 20 25.7 9 80 0.00 0290026 26 3/8 49.3 37.7 20 25.7 9 63 0.00 0290027 27 3/8 52.8 40 2.4 28.2 20 00 0.00 029027 27DC 3 ) 3 /8 57. 42. 5 29.3 20 92 0.00 0390028 28 /2 56.8 42. 22.5 29.3 2 20 0.00 0390030 30 /2 63 48 22.5 32.5 22 55 0.00 0390032 32 /2 62.5 48 22.5 32.5 24 37 0.00 0390034 34 /2 64.2 50 24 33.5 27 48 0.00 0390036 36 /2 66.5 5.9 24 34.6 27 50 0.00 0390038 38 /2 68. 53.9 24 35.6 28.6 47 0.00 0390040 40 /2 7.8 57.9 24.5 37.7 3 60 0.00 039004 4 /2 7.8 57.9 24.5 37.7 3 69 0.00 0390042 42 /2 7 57.9 24.5 37.7 33.2 89 0.00 0390046 46 /2 77.7 64.2 26 40.9 34. 229 0.00 0390050 50 /2 83.2 70.5 27.5 44. 39.7 295 0.00 ) For use on hydraulics (TONADO), for union nuts on fuel injection leads on 4-cylinder Mercedes-Benz diesel engines, models 60, 90D, C200D, E200D, turbo diesel, 603, G300D, G350D, turbo, E300D off-roader, turbo and S350 turbo diesel 2 ) For use on suction or pressure lines within expansion valve of air conditioning unit (DaimlerChrysler) 3 ) Slim-line version for setting of electronic injection on 440-HP-engines Mercedes-Benz series OM 442 3 57
3/8 0 DIN 320 ISO 74-3 440a COW-ING spanners A a L b a S W " " mm mm mm mm mm g S 0490024 3 /8 ) /4 28.4 8.2 3.5 4 7. 4 0.00 0490028 7 /6 /4 28 8.2 3.5 4 8.6 4 0.00 0490032 /2 /4 30.5 20.6 4 5.7 0 9 0.00 0490034 9 /6 /4 3.7 22.2 4 6.4. 23 0.00 02490036 5 /8 3/8 36.5 24.6 7.5 9..9 33 0.00 02490038 /6 3/8 39.2 27.3 7.5 20.5 4 36 0.00 02490040 3 /4 3/8 40.9 29 8.5 2.3 4.2 44 0.00 02490042 3 /6 3/8 42.9 3.3 8.5 22.5 5.8 5 0.00 02490044 7 /8 3/8 45.2 33.5 9 23.6 7.5 62 0.00 02490046 5 /6 3/8 47.2 35.7 9.5 24.6 8.3 63 0.00 02490048 3/8 49.3 37.7 20 25.7 9 7 0.00 02490050 /6 3 /8 52.8 40 2.4 28.2 20 84 0.00 03490052 /8 /2 56.8 42. 22.5 29.3 2 0 0.00 03490056 /4 /2 62.5 48 22.5 32.5 23.8 37 0.00 03490058 5 /6 /2 62.3 48 22.5 32.5 24.6 30 0.00 03490060 3 /8 /2 64.2 50 24 33.5 27 38 0.00 03490062 7 /6 /2 66.5 5.9 24 34.6 27 43 0.00 03490064 /2 /2 68. 53.9 24 35.6 28.6 52 0.00 03490065 9 /6 /2 70. 55.9 24 36.7 29.4 72 0.00 03490066 5 /8 /2 7.8 57.9 24.5 37.7 3 69 0.00 03490068 3 /4 /2 75.6 62 25.5 39.8 33.2 99 0.00 03490069 3 /6 /2 77.7 64.2 26 40.9 34. 229 0.00 03490072 2 /2 83.2 70.5 27.5 44. 39.7 277 0.00 03490076 2 /4 /2 9.2 78.7 29.5 48.2 42.8 337 0.00 03490077 2 5 /6 /2 93.3 80.9 30 49.2 43.6 309 0.00 03490078 2 3 /8 /2 95.2 83 30.5 50.2 46 385 0.00 ) For Volvo aero-engines, types "JAS" 440 MJ COW-ING spanners Q Caution! Modified settings on torque wrench (refer to note on page 20), EN 408, for pipe unions with straight cylindrical involute toothing, HPQ high performance steel, chrome plated. 540 COW-FOOT spanners Caution! Modified settings on torque wrench (refer to note on page 20), Chrome Alloy Steel, chrome plated. A a L b a S mm " mm mm mm mm g S 0200008 8 /4 25.5 9.8 6.3 4.6 2 0.00 0200009 9 /4 25.5 9.8 6.3 4.6 2 0.00 020000 0 /4 25.5 9.8 6.3 4.6 20 0.00 022000 3/8 32 22.2 6.3 7.4 36 0.00 0220002 2 3/8 34.3 25.4 6.3 8.2 37 0.00 0220003 3 3/8 34.3 25.4 6.3 7.8 36 0.00 0220004 4 3/8 37.7 30 6.3 20.8 46 0.00 0220005 5 3/8 37.7 30 6.3 20.4 45 0.00 0220006 6 3/8 37.7 30 6.3 9.9 45 0.00 0220007 7 3/8 42.5 38 6.3 23.8 62 0.00 0220008 8 3/8 42.5 38 6.3 22.9 6 0.00 0220009 9 3/8 42.5 38 6.3 22.4 64 0.00 02200020 20 3/8 42.4 38 6.3 25 55 0.00 0220002 2 3/8 44.5 4 6.3 23.6 59 0.00 02200022 22 3/8 44.5 4 6.3 24.2 64 0.00 02200023 23 3/8 44.5 4 6.3 25.8 63 0.00 02200024 24 3/8 44.4 4 6.3 26.3 60 0.00 02200025 25 3/8 47 45 8 26.4 75 0.00 02200026 26 3/8 47 45 8 27.6 80 0.00 02200027 27 3/8 47 45 8 27.6 76 0.00 02200028 28 3/8 50 50 8 29.2 78 0.00 02200030 30 3/8 50 50 8 29.3 84 0.00 02200032 32 3/8 53 57 8 30.5 95 0.00 02200034 34 3/8 54.5 60 8 3.6 07 0.00 02200036 36 3/8 56.5 62 8 32.8 00 0.00 02200040 40 3/8 63 70 8 37.6 30 0.00 0220004 4 3/8 63 70 8 37.2 30 0.00 02200042 42 3/8 63 70 8 37.7 25 0.00 02200046 46 3/8 72 82 8 43. 9 0.00 02200050 50 3/8 75 88 8 45.4 27 0.00 Threaded G a L b a S W nut mm " mm mm mm mm mm g S 02000 MJ0 DN04 /4 3.9 22 8 7 6.5 25 0.00 02004 MJ4 DN06 /4 36.5 27 8 9.5 8.5 30 0.00 022006 MJ6 DN08 3/8 43.8 3 8 24 0.5 50 0.00 022008 MJ8 DN0 3/8 45.2 33 8 25 3 45 0.00 0220020 MJ20 DN2 3/8 46.2 35 8 26 5 50 0.00 0220022 MJ22 DN4 3/8 48.4 37 9 27 7.5 55 0.00 0220024 MJ24 DN6 3/8 49.5 39 9 28 9.7 60 0.00 0220027 MJ27 DN8 3/8 54.4 44 0 3 2.5 75 0.00 0220030 MJ30 DN20 3/8 60.8 50 0 36 23.7 95 0.00 58
3/8 0 DIN 320 ISO 74-540a COW-FOOT spanners A a L b a S " " mm mm mm mm g S 0500024 3 /8 /4 25.5 9.8 6.3 4.6 7 0.00 02500028 7 /6 3/8 32 22.2 6.3 7.2 34 0.00 02500032 /2 3/8 34.3 25.4 6.3 8. 37 0.00 02500034 9 /6 3/8 37.7 30 6.3 20.9 40 0.00 02500036 5 /8 3/8 37.7 30 6.3 20.4 44 0.00 02500038 /6 3/8 42.5 38 6.3 24. 62 0.00 02500040 3 /4 3/8 42.5 38 6.3 24 66 0.00 02500042 3 /6 3/8 42.3 38 6.3 24 59 0.00 02500044 7 /8 3/8 44.5 4 6.3 25.8 65 0.00 02500048 3/8 47 45 8 26.7 78 0.00 02500050 /6 3/8 47 45 8 27.2 78 0.00 02500052 /8 3/8 50 50 8 28.5 84 0.00 02500054 3 /6 3/8 50 50 8 29.2 83 0.00 02500056 /4 3/8 53 57 8 30.3 0 0.00 02500058 5 /6 3/8 53 57 8 3.2 0 0.00 02500060 3 /8 3/8 54.5 60 8 32.3 05 0.00 02500062 7 /6 3/8 56.5 62 8 33. 07 0.00 02500064 /2 3/8 58 65 8 34.5 8 0.00 02500065 9 /6 3/8 59.5 68 8 35.7 26 0.00 02500066 5 /8 3/8 63 70 8 37.3 40 0.00 02500067 /6 3/8 63 70 8 37.7 26 0.00 02500068 3 /4 3/8 68 76 8 40.4 6 0.00 02500070 7 /8 3/8 72 82 8 42 205 0.00 02500072 2 3/8 75 88 8 44.8 24 0.00 02500074 2 /8 3/8 75.6 9 0 46 265 0.00 02500076 2 /4 3/8 80.5 96 0 49.5 297 0.00 03500078 2 3 /8 /2 8.5 96 8 5.3 24 0.00 447 f Adaptor P Q Caution! Modified settings on torque wrench (refer to note on page 20), American sizes: SAE AS 954-E, HPQ high performance steel, gunmetal finish. 447aSP h Spline-Drive adaptor Q Caution! Modified settings on torque wrench (refer to note on page 20), MS-33787, MIL-W-8982, HPQ high performance steel, gunmetal finish. Spline A d d 2 h h 2 S size " mm mm mm mm mm g S 0248004 7 7/32 9.4 9 6 50.8 27 0.00 0248006 8 /4 0.4 9 6 50.8 27 0.00 0248008 9 9/32.5 9 6 50.8 29 0.00 02480020 0 5/6 2.4 9 6 50.8 29 0.00 02480024 2 3/8 4.9 9 8 50.8 40 0.00 02480028 4 7/6 7 9 9.2 50.8 50 0.00 02480032 6 /2 9 9 9.2 50.8 59 0.00 02480034 8 9/6 2 9 9.2 50.8 55 0.00 02480036 20 5/8 23 9 2 50.8 74 0.00 Drive tools and accessories 3/8" u, finish: Chrome Alloy Steel, chrome plated. 422 atchet fine tooth, reversible, 60 teeth, for use in confined spaces, re-engages after movement of 6, DIN 322/ISO 335. 3 A d d 2 h h 2 S mm mm mm mm mm mm g S 028007 7.5 9 6 50.8 30 0.00 028008 8 2.4 9 6 50.8 30 0.00 028009 9 4 9 8 50.8 40 0.00 02800 0 5.6 9 8 50.8 40 0.00 02803 3 9.3 9 9.2 50.8 55 0.00 447a f Adaptor A d d 2 h h 2 S " mm mm mm mm mm g S 0247006 /4 0.4 9 6 50.8 27 0.00 02470020 5/6 2.4 9 6 50.8 29 0.00 02470024 3/8 4.9 9 8 50.8 4 0.00 02470028 7/6 7 9 8 50.8 40 0.00 02470032 /2 9 9 9.2 50.8 56 0.00 02470034 9/6 2 9 9.2 50.8 6 0.00 02470036 5/8 23 9 2 50.8 73 0.00 L b a mm mm mm g S 22300 94 32 24 260 0.00 435 reversible, 30 teeth, DIN 322/ISO 335. atchet L b a mm mm mm g S 2000 93 29 7 233 5 0.00 435Q Üü Quickelease ratchet reversible, 30 teeth, with Quickelease safety locks and 2-component handles, DIN 322/ISO 335. L b a mm mm mm g S 20020 93 29 7 244 0.00 59
3/8 0 DIN 320 ISO 74-3 435Q/3 Üü Content: atchet 435Q Extension 427/3Q, 76 mm Extension 427/6Q, 60 mm Extension 427/0Q, 240 mm 435SG-Q Üü Quickelease ratchet reversible, 30 teeth, with Quickelease safety locks and steel handle, DIN 322/ISO 335. L b a mm mm mm g S 20030 93 29 7 275 0.00 435B Quickelease set g S 96203 722 0.00 Bit ratchet reversible, with inside hexagon 5 /6", DIN 326/ISO 73 D 8 for Bits Screwdriver sockets 5 /6", 30 teeth. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). 453 with steel handle, for greater axial power transmission, detachable palm head, working radius 85 mm, DIN 322/ISO 335. Speeder brace L mm g S 200002 408 69 0.00 424 DIN 322/ISO 335. Flexible handle L mm g S 206000 253.5 222 5 0.00 425 DIN 322/ISO 335. Sliding T-handle L mm g S 2070000 65 33 5 0.00 425Q Üü with Quickelease safety locks. Quickelease sliding T-handle L b a mm mm mm g S 2300 93 29 7 220 0.00 L mm g S 207000 65 48 0.00 445 atchet adaptor 444 T-handle extension reversible, 20 teeth. L O mm mm g S 240000 53 30 35 0.00 452 Flexible joint ratchet reversible, 60 teeth, handle may be raised or lowered by approx. 90. Lockable in following positions: straight, 30 up, 60 up, 30 down. Unlocked by depressing button in handle, registered design. L L 2 mm mm g S 202000 455 90 437 5 0.00 427 DIN 323/ISO 336. Extensions L b a mm mm mm g S 226000 300 34 24 500 0.00 L d size mm mm g S 200005.5 38 7 36 5 0.00 20000 3 76 7 67 5 0.00 200006 5 25 7 04 5 0.00 200002 6 60 7 27 5 0.00 200003 0 240 7 88 5 0.00 200004 8 455 7 345 5 0.00 60
3/8 0 DIN 320 ISO 74-427W swivel angle 5 each side, max. torque 80 N m. Extensions with wobble-drive 3220 Special extension for removing Boroscope plugs, with Boroscope plug locking, external hexagon size 6 mm. L mm g S 2270020 355 362 0.00 L d size mm mm g S 200007 3 76 7 67 5 0.00 200008 5 25 7 04 5 0.00 200009 6 60 7 27 5 0.00 427Q Üü DIN 323/ISO 336. Quickelease extensions 428 DIN 323/ISO 336. Universal joint L d mm mm g S 2020000 46 8.8 55 5 0.00 428Q Üü Quickelease universal joint DIN 323/ISO 336, with Quickelease safety locks. 3 L d size mm mm g S 2000 3 76 7 66 0.00 20002 6 60 7 27 0.00 20003 0 240 7 85 0.00 433/ with hexagon key wrench No 0760aCV /8". Locking adaptor L d mm mm g S 962270 52 8 57 0.00 434 (right hand rotation only), maximum torque 7 N m. Extension, flexible L d mm mm g S 2040000 94 7 09 5 0.00 225 Special extension L d mm mm g S 202000 60 9 66 0.00 43 Adaptor Q 3/8" socket x /4" plug (0 x 6.3), maximum torque 62 N m, DIN 323/ISO 336, HPQ high performance steel L d mm mm g S 203000 28 7.2 26 5 0.00 432 Adaptor Q 3/8" socket x /2" plug (0 x 2.5), DIN 323/ISO 336, HPQ high performance steel L d mm mm g S 2030003 3 7.2 36 5 0.00 L d mm mm g S 225000 50 7 28 5 0.00 6
3/8 0 DIN 320 ISO 74-3 409M/432M Set adaptors, 3 pieces /54M/3 /4" socket x 3 /8" plug, 3/8" socket x /2" plug, /2" socket x 3 /4" plug. g S 962002 20 0.00 432M 3/8" socket x /2" plug (0 x 2.5 mm). Adaptor L O mm mm g S 203000 6 32 22 0.00 442 Bit holder c /4" inside hexagon, DIN 326 form D 6.3/ISO 73 form D 6.3. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). 45ma/28/5 Socket set 3 /8" u In sturdy sheet steel case, 33 pieces Content: 28 sockets with bi-hexagon No 45: sizes 7; 8; 9; 0; ; 2; 3; 4;5; 6; 7; 8; 9; 20; 2; 22 mm No 45a: sizes /4; 5 /6; /32; 3 /8; 7/6; /2; 9 /6; 5 /8; /6; 3 /4; 3/6; 7 /8" ratchet No 435 2 extensions No 427/3 (76 mm), No 427/0 (240 mm) T-handle No 425 universal joint No 428 g 9602022 2920 0.00 45a/8/4 Socket set 3 /8" u In sturdy sheet steel case, 2 pieces Content: 8 sockets with bi-hexagon No 45a: sizes /4; 5 /6; 3 /8; 7 /6; /2; 9 /6; 5 /8; 3/4" ratchet No 435 2 extensions No 427/3 (76 mm), No 427/0 (240 mm) universal joint No 428 L d mm mm g S 280026 32 6.5 30 5 0.00 443 Bit holder c 5 /6" inside hexagon, DIN 326 form D 8/ISO 73 form D 8. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). L d mm mm g S 280030 32 6.5 39 5 0.00 45/4/5iQ Üü Socket set 3 /8" u In a sturdy ABS plastic case, 9 pieces Content: 4 sockets with bi-hexagon No 45: sizes 8; 9; 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 2; 22 mm ratchet No 435Q 2 extensions No 427Q/3 (76 mm), No 427Q/0 (240 mm) T-handle No 425Q universal joint No 428Q g 9602405 500 0.00 45a/3/5 Socket set 3 /8" u In sturdy sheet steel case, 8 pieces Content: sockets with bi-hexagon No 45a: sizes /4; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6; 5/8; /6; 3 /4; 3 /6" 2 sockets with bi-hexagon, long, with rubber insert No 4600: size 6 mm - 5 /8", No 46: size 20.8 mm - 3 /6" ratchet No 435 2 extensions No 427/3 (76 mm), No 427/0 (240 mm) T-handle No 425 universal joint No 428 g 9602404 95 0.00 g 9602080 650 0.00 62
3/8 0 DIN 320 ISO 74-45a/2/9 Socket set 3 /8" u In sturdy sheet steel case, 2 pieces Content: 2 sockets with bi-hexagon No 45a: sizes /4; 5 /6; /32; 3 /8; 7 /6; /2; 9 /6; 5 /8; /6; 3 /4; 3 /6; 7 /8" ratchet No 435SG-Q 3 extensions No 427/3 (76 mm), No 427/6 (60 mm), No 427/0 (240 mm) universal joint No 428 locking adaptor No 433/ 2 bit-holders No 442, No 443 speeder brace No 453 g 9602406 35 0.00 45a/9/9 Socket set 3 /8" u In sturdy sheet steel case, 28 pieces Content: 2 sockets with bi-hexagon No 45a: sizes /4; 5 /6; /32; 3/8; 7 /6; /2; 9 /6; 5 /8; /6; 3 /4; 3/6; 7 /8" 7 UNIFLEX sockets with bi-hexagon No 47a: sizes 3 /8; 7 /6; /2; 9 /6; 5 /8; /6; 3 /4 ratchet No 435SG-Q 3 extensions No 427/3 (76 mm), No 427/6 (60 mm), No 427/0 (240 mm) universal joint No 428 locking adaptor No 433/ 2 bit-holders No 442, No 443 speeder brace No 453 45a/33/3 Socket set 3 /8" u In sturdy sheet steel case, 46 pieces Content: 0 sockets with bi-hexagon No 45a: sizes /4; 5 /6; /32; 3 /8; 7 /6; /2; 9/6; 5 /8; /6; 3 /4" 2 sockets with bi-hexagon, long, with rubber insert No 4600: size 6 mm - 5 /8", No 46: size 20.8 mm - 3 /6" 7 sockets with bi-hexagon, long, No 46a: sizes 3 /8; 7 /6; /2; 9 /6; /6; 3 /4; 7 /8" 7 UNIFLEX sockets with bi-hexagon No 47a: sizes 3 /8; 7 /6; /2; 9 /6; 5 /8; /6; 3 /4" 3 INHEX sockets No 49a: sizes /8; 5 /32; 3 /6" 4 bits k 23: size ; 232: size 2; 233: size 3; 234: size 4 2 ratchets No 45, No 435 ratchet adaptor No 445 3 extensions No 427/3 (76 mm), No 427/6 (60 mm), No 427/0 (240 mm) flexible extension No 434 (94 mm) adaptor No 409 speeder brace No 42 flexible handle No 424 T-handle No 425 universal joint No 428 bit-holder No 443 g 960243 6540 0.00 3 g 9602407 3906 0.00 63
/2 2,5 DIN 320 ISO 74-50 f Sockets P Q metric sizes: DIN 324/ISO 2725-, E DIN EN 3709, ASME B 07.5 M, American sizes: ASME B 07., Fed. Spec. GGG-W-64, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated. 5 f Sockets P Q extra deep, metric sizes: DIN 324/ISO 2725-, E DIN EN 370, E DIN EN 3709, ASME B 07.5M, American sizes: ASME B 07., Fed. Spec. GGG-W-64, SAE AS 954-E, HPQ high performance steel, chrome plated. d 3 d 3 3 50a t t 2 A d d 2 d 3 L t t 2 mm mm mm mm mm mm mm g S 0300008 8 3 22 7 38 9 22 56 0 0.00 0300009 9 3.7 22 8 38 9 22 57 0 0.00 030000 0 4.5 22 9 38 9 22 57 0 0.00 03000 5.8 22 0 38 9.5 22 52 0 0.00 030002 2 7 22 38 3 22 58 0 0.00 030003 3 8.3 22 2 38 3 22 60 0 0.00 030004 4 9.9 22.7 3 38 3 20.5 60 0 0.00 030005 5 2.2 22.7 4 38 3.5 20.2 62 0 0.00 030006 6 22.4 23.7 5 38 3.5 9.6 63 0 0.00 030007 7 24 23.7 5.2 38 5 9.6 66 0 0.00 030008 8 24.7 23.7 7 38 5.5 9. 7 0 0.00 030009 9 26.2 25 8 38 6 2.7 78 0 0.00 0300020 20 27.2 25 9 42 7 25.5 89 0 0.00 030002 2 28.7 26 20 42 8 25.2 04 0 0.00 0300022 22 29.7 26 2 42 8 24.9 3 0 0.00 0300023 23 30.7 26 20 42 8 25.4 4 5 0.00 0300024 24 32 26 2 42 8.5 24.9 7 5 0.00 0300025 25 33.2 25 22 42 8.5 24.6 9 5 0.00 0300026 26 34.4 25 23 42 8.5 24.3 22 5 0.00 0300027 27 36.2 26 24 45 9.5 27 50 5 0.00 0300028 28 37.4 27 25 45 9.5 26.7 58 5 0.00 0300030 30 39.7 28 27 45 20.5 26. 7 5 0.00 030003 3 42.2 28 28 47 22 27.9 25 5 0.00 0300032 32 42.2 28 29 47 22 27.6 89 5 0.00 0300034 34 45 28 3 47 22 27 209 5 0.00 f Sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 0340024 3 /8 4.3 22 8.3 38 9 22 57 0 0.00 0340028 7 /6 6.3 22 9.9 38 9 22 59 0 0.00 0340032 /2 8.3 22.5 38 3 22 59 0 0.00 0340034 9 /6 20.3 22.7 3. 38 3 20.2 62 0 0.00 0340035 9 /32 2.3 22.7 3.5 38 3.5 20. 6 0 0.00 0340036 5 /8 22.4 23.7 5 38 3.5 9.6 62 0 0.00 0340038 /6 24.2 23.7 6.5 38 5.5 9.2 68 0 0.00 0340040 3 /4 26.2 25 8 38 6 2.7 78 0 0.00 034004 25 /32 27 25 8.6 4 6 24.6 90 5 0.00 0340042 3 /6 28.2 25 9.4 4 6.5 24.3 95 5 0.00 0340044 7 /8 29.7 26 2 42 8 24.9 5 0.00 0340046 5 /6 32 26 22.6 42 8.5 24.4 2 5 0.00 0340048 33.7 27 24.2 42 8.5 24 35 5 0.00 0340050 /6 36.2 26 25.8 45 9.5 26.5 55 5 0.00 0340052 /8 38. 28 27.4 45 20 26 67 5 0.00 0340054 3 /6 39 28 28 45 20.5 25.9 78 5 0.00 0340056 /4 40 28 30.5 45 2 25. 96 5 0.00 0340058 5 /6 4.8 28 32. 47 22 26.7 20 5 0.00 0340060 3 /8 46 28 33.7 50 23 29.2 232 5 0.00 0340062 7 /6 49.4 3 34 54 26 33. 320 5 0.00 0340064 /2 5 3 35 54 26 32.8 330 5 0.00 5a t t 2 A d d 2 d 3 L t t 2 mm/" mm mm mm mm mm mm g S 0302000 0 4.5 22 9 83 9 67 90 0 0.00 0302003 3 8.3 22 2 83 35 67 22 0 0.00 0302004 4 9.9 22.7 3 83 35 65.2 29 0 0.00 0302005 5 2.2 22.7 4 83 35 64.9 32 0 0.00 0302006 6 22.4 23.7 5 83 35 64.6 45 0 0.00 0302026 6-5 /8 ) 22.4 23.7 5.4 83 9 64.5 37 0 0.00 0302007 7 24 23.7 6 83 35 64.3 32 0 0.00 0302008 8 24.7 23.7 7 83 35 64. 70 0 0.00 0302009 9 26.2 25 8 83 35 66.7 86 0 0.00 03020208 20.8-3 /6 ) 27.7 26 20 83 22 66.2 94 0 0.00 0302002 2 28.7 26.5 20 83 35 66.2 23 0 0.00 03020022 22 29.7 27.5 2 83 35 65.5 200 0 0.00 03020024 24 32 30 2 83 35 66. 280 5 0.00 03020027 27 2 ) 36.2 34 27 83 20 60 294 5 0.00 03020030 30 2 ) 39.7 37.5 30.2 83 35 65 34 5 0.00 03020032 32 42.4 40 29 83 35 63.9 46 5 0.00 ) with rubber insert for spark plugs 2 ) for diesel injector (VW/Audi, DaimlerChrysler, Opel, Ford, Peugeot, Volvo, Toyota, Mazda, Nissan, Mitsubishi, Daihatsu) f Sockets A d d 2 d 3 L t t 2 " mm mm mm mm mm mm g S 03420024 3 /8 4.3 22 8.3 83 9 67 93 5 0.00 03420028 7 /6 6.3 22 9.9 83 9 67 02 5 0.00 03420032 /2 8.3 22.5 83 35 67 22 5 0.00 03420034 9 /6 20.3 22.7 3. 83 35 65.2 3 5 0.00 03420036 5 /8 22.4 23.7 5 83 35 64.6 45 5 0.00 03420038 /6 24.2 23.7 6.5 83 35 64.2 58 5 0.00 03420040 3 /4 26.2 25 8 83 35 66.7 88 5 0.00 03420042 3 /6 27.7 26 9.5 83 35 66.3 70 5 0.00 03420044 7 /8 29.7 27.5 2 83 35 65.9 246 5 0.00 03420046 5 /6 32 30 22.6 83 35 65.7 28 5 0.00 03420048 33.7 32 24.2 83 35 65 32 5 0.00 03420050 /6 36.2 34 25.8 83 35 64.5 359 5 0.00 03420052 /8 38. 36 27.4 83 35 64 39 5 0.00 03420054 3 /6 39 37 28 83 35 63.9 377 5 0.00 03420056 /4 40 38 30.5 83 35 63. 433 5 0.00 03420058 5 /6 4.8 40 32. 83 35 62.7 479 5 0.00 03420060 3 /8 46 44 33.7 83 35 62.2 506 5 0.00 03420062 7 /6 49.4 47 34 83 35 62. 635 5 0.00 03420064 /2 5 49 35 83 35 6.8 675 5 0.00 64
/2 2,5 DIN 320 ISO 74-50aPSP h Sockets spline-drive Q MS-33787, MIL-W-8982, HPQ high performance steel, gunmetal finish. Drive tools and accessories /2" u, finish: Chrome Alloy Steel, chrome plated. 52 reversible, 36 teeth, DIN 322/ISO 335. atchet Spline A d d 2 d 3 L t t 2 size " mm mm mm mm mm mm g S 0302028 4 7/6 8 23.7 0.4 38 22 65 5 0.00 50aPLSP h Sockets spline-drive Q extra deep bolt clearance, MS-33787, MIL-W-8982, HPQ high performance steel, gunmetal finish. L b a mm mm mm g S 3000 265.5 4 2 580 0.00 52Q Üü Quickelease ratchet reversible, 36 teeth, with Quickelease safety locks and 2-component handles, DIN 322/ISO 335. L b a mm mm mm g S 30020 265.5 4 2 599 0.00 3 52Q/3 Quickelease set Spline A d d 2 d 3 L t t 2 size " mm mm mm mm mm mm g S 0303028 4 7/6 8 23.7 0.4 50 34 83 5 0.00 54 i INHEX sockets for hexagon socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated. B L L 2 d mm mm mm mm g S 03050004 4 60 22 22.7 68 5 0.00 03050005 5 60 22 22.7 68 5 0.00 03050006 6 60 22 22.7 7 5 0.00 03050007 7 60 22 22.7 75 5 0.00 03050008 8 60 22 22.7 79 5 0.00 0305000 0 60 22 22.7 97 5 0.00 0305002 2 60 20 23.7 22 5 0.00 0305004 4 60 20 23.7 35 5 0.00 0305007 7 60 20 27.5 86 5 0.00 0305009 9 60 20 3 242 5 0.00 54a i INHEX sockets B L L 2 d " mm mm mm g S 0345004 7/32 60 22 22.7 70 5 0.00 0345006 /4 60 22 22.7 75 5 0.00 03450020 5/6 60 22 22.7 8 5 0.00 03450024 3/8 60 22 22.7 97 5 0.00 03450028 7/6 60 22 22.7 03 5 0.00 03450032 /2 60 20 23.7 25 5 0.00 03450034 9/6 60 20 23.7 37 5 0.00 03450036 5/8 60 20 27.5 69 5 0.00 03450040 3/4 60 20 3 244 2 0.00 Üü Content: atchet 52Q Extension 509/2Q, 52 mm Extension 509/5Q, 30 mm Extension 509/0Q, 255 mm g S 96303 37 0.00 52SG-Q Üü Quickelease ratchet reversible, 36 teeth, with Quickelease safety locks and steel handle, DIN 322/ISO 335. L b a mm mm mm g S 30030 265.5 4 2 680 0.00 55 reversible, 60 teeth, for use in confined spaces, re-engages after movement of 6, DIN 322/ISO 335. atchet, fine tooth L b a mm mm mm g S 32300 265 40 26.2 485 0.00 65
/2 2,5 DIN 320 ISO 74-3 57 50 working radius 05 mm, DIN 322/ISO 335. Speeder brace L mm g S 30000 456 65 5 0.00 504 DIN 322/ISO 335. Flexible joint ratchet reversible, 60 teeth, handle may be raised or lowered by approx. 90. Lockable in following positions: straight, 30 up, 60 up, 30 down. Unlocked by depressing button in handle, registered design. L b a mm mm mm g S 326000 45 43 26 793 0.00 522 reversible, 20 teeth. atchet adaptor L O mm mm g S 340000 67.5 40 36 0.00 532 long handle, reversible, 36 teeth. atchet L b a mm mm mm g S 32000 380 4 2 82 0.00 Flexible handle L size mm g S 30600 0 269 55 5 0.00 306002 5 397 700 5 0.00 306003 8 469 779 5 0.00 506 DIN 322/ISO 335. Sliding T-handle L mm g S 3070000 300 436 5 0.00 506Q Üü with Quickelease safety locks. Quickelease sliding T-handle L mm g S 307000 300 470 0.00 509 DIN 323/ISO 336. Extensions L d size mm mm g S 30000 2 52 23 88 5 0.00 300004 3 75 23.2 20 5 0.00 300002 5 30 23.2 9 5 0.00 300003 0 255 23.2 34 5 0.00 509W swivel angle 5 each side, maximum torque 200 N m. Extensions with wobble-drive L d size mm mm g S 300005 2 52 23 80 5 0.00 300006 3 75 23.2 20 5 0.00 300007 5 30 23.2 9 5 0.00 300008 0 255 23.2 34 5 0.00 509Q Quickelease extensions 5040 for No 504. Content: Universal Joint Screw Spring Washer Spare parts set for No 504 Üü DIN 323/ISO 336. g S 9690800 75 0.00 L d size mm mm g S 3000 2 52 23 90 0.00 30004 3 75 23 23 0.00 30002 5 30 23 87 0.00 30003 0 255 23 34 0.00 66
/2 2,5 DIN 320 ISO 74-3505 Special extension for COW-FOOT spanner No 3540 7789- Adaptor Q /2" socket x " plug (2.5 x 25 mm), HPQ high performance steel. L d mm mm g S 32000 20 23.2 86 0.00 50 DIN 323/ISO 336. Universal joint L d mm mm g S 3020000 7 25 46 5 0.00 50Q Üü Quickelease universal joint DIN 323/ISO 336, with Quickelease safety locks. L d mm mm g S 58522089 35 36.5 75 0.00 409M/432M Set adaptors, 3 pieces /54M/3 /4" socket x 3 /8" plug, 3/8" socket x /2" plug, /2" socket x 3 /4" plug. g S 962002 20 0.00 54M /2" socket x 3 /4" plug (2.5 x 20 mm). Adaptor 3 L d mm mm g S 302000 80 25 57 0.00 53 Adaptor Q /2" socket x 3 /8" plug (2.5 x 0), maximum torque 202 N m, DIN 323/ISO 336, HPQ high performance steel. L d mm mm g S 3030002 35 22.7 55 5 0.00 54 Adaptor Q /2" socket x 3 /4" plug (2.5 x 20), DIN 323/ISO 336, HPQ high performance steel. L O mm mm g S 303000 22 38 50 0.00 543 Bit holder c 5 /6" inside hexagon, DIN 326 form D 8/ISO 73 form D 8. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). L d mm mm g S 38000 38 22 65 5 0.00 L d mm mm g S 3030005 44 25 8 5 0.00 67
/2 2,5 DIN 320 ISO 74-50/7/6 Socket set /2" u In sturdy sheet steel case, 23 pieces Content: 7 sockets with bi-hexagon No 50: sizes 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 2; 22; 24; 27; 30; 32; 34 mm ratchet No 52 3 extensions No 509/3 (75 mm), No 509/5 (30 mm), No 509/0 (255 mm) T-handle No 506 universal joint No 50 g 9603047 523 0.00 3 50ma/39/6N Socket set /2" u In sturdy sheet steel case, 45 pieces Content: 39 sockets with bi-hexagon No 50: sizes 0; ; 2; 3; 4; 5; 6; 7; 8; 9; 20; 2; 22; 23; 24; 25; 26; 27; 28; 30; 32; 34 mm No 50a: sizes 3 /8; 7 /6; /2; 9 /6; 9/32; 5 /8; /6; 3 /4; 25 /32; 3/6; 7 /8; 5 /6; ; /6; /8; 3 /6; /4" ratchet No 52 3 extensions No 509/3 (75 mm), No 509/5 (30 mm), No 509/0 (255 mm) T-handle No 506 universal joint No 50 g 9603040 8560 0.00 68
4 489 Set of six 3K DALL screwdrivers. Content: r 4820: 0.6 x 3.5 x 75 mm 0.8x 4 x 00 mm x 5.5 x 25 mm.2 x 6.5 x 50 mm k 4830: size ; size 2 3K DALL set of screwdrivers g S 964890 530 0.00 4892 Set of eight 3K DALL screwdrivers. Content: r 4820: 0.6 x 3.5 x 75 mm 0.8x 4 x 00 mm x 5.5 x 25 mm.2 x 6.5 x 50 mm.6 x 8x 75 mm k 4830: size ; size 2; size 3 3K DALL set of screwdrivers g S 9648920 745 0.00 4899 Set of nine 3K DALL screwdrivers for TOX screws (TOX TAMPE ESISTANT). Content: o 4856: T8, T9; T0; T5; T20; T25; T27; T30; T40 (with hollow point) o 3K DALL set of TOX screwdrivers g S 9648990 53 0.00 TCS 4820/4830 xö 75 x 350 x 30 mm, 7 pieces g 9683884 555 0.00 No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4 x 00 mm; x 5.5 x 25 mm;.2 x 6.5 x 50 mm No 4830 sizes ; 2; 3 TCS 4724/4840+0767 xö 530 x 350 x 45 mm, 24 pieces g 96830606 633 0.00 4820 No 4724 No 4728 No 4734 size 2 No 4744 size size 2 ( x 5.5 x 25 mm) size (0.4 x 2.5 x 50 mm) No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4 x 00 mm;.2 x 6.5 x 50 mm;.6 x 0 x 200 mm; 2.0 x 2 x 250 mm No 4830 sizes ; 2; 3 No 4840 size No 0767/9 No 7756 No 2922N sizes.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm r 3K DALL workshop screwdrivers DIN 5265, ISO 2380, Chrome Alloy Steel, matt chrome plated, black tips. a b L L 2 mm mm mm mm g S 4820035 0.6 3.5 75 70 23 0 0.00 4820040 0.8 4 00 95 32 0 0.00 48202055 5.5 25 220 54 0 0.00 4820065.2 6.5 50 265 8 0 0.00 4820080.6 8 75 290 8 0 0.00 482000.6 0 200 35 58 5 0.00 4820200 2 2 250 375 28 5 0.00 4820300 2.5 4 250 375 3 5 0.00 4830 Phillips-ecess, DIN 5262, ISO 8764, Chrome Alloy Steel, matt chrome plated, black tips. k 3K DALL cross-head screwdrivers PH L L 2 size mm mm g S 4830000 0 60 55 6 0 0.00 483000 80 75 33 0 0.00 4830002 2 00 25 70 0 0.00 4830003 3 50 275 26 5 0.00 4830004 4 200 325 25 5 0.00 72
4840 POZIDIV/SUPADIV DIN 5262, ISO 8764, Chrome Alloy Steel, matt chrome plated, black tips. l 3K DALL cross-head screwdrivers PZ L L 2 size mm mm g S 4840000 0 60 55 6 0 0.00 484000 80 75 33 0 0.00 4840002 2 00 25 70 0 0.00 4840003 3 50 275 26 5 0.00 4840004 4 200 325 25 5 0.00 4856 with hollow point (TOX TAMPE ESISTANT), Chrome Alloy Steel, matt chrome plated, black tips. o 3K DALL TOX screwdrivers C L L 2 size mm mm mm g S 48560006 T6*.6 50 45 4 5 0.00 48560007 T7 2.0 50 45 4 5 0.00 48560008 T8 2.3 60 55 2 5 0.00 48560009 T9 2.5 60 55 2 5 0.00 4856000 T0 2.7 80 75 26 5 0.00 4856005 T5 3.3 80 75 28 5 0.00 48560020 T20 3.8 00 25 32 5 0.00 48560025 T25 4.4 00 25 55 5 0.00 48560027 T27 5.0 5 230 58 5 0.00 48560030 T30 5.5 5 230 63 5 0.00 48560040 T40 6.6 5 240 86 5 0.00 48560045 T45 7.8 30 255 07 5 0.00 * without hollow point 479 Set of seven DALL screwdrivers. Content: r 4720: size (0.6 x 3.5 x 75 mm) size 2 (0.8 x4x00mm) size 4 ( x 5.5 x 25 mm) size 5 (.2 x 6.5 x 50 mm) r 4728: size (0.4 x 2.5 x 50 mm) k 4730: size ; size 2 DALL set of screwdrivers g S 964790 47 0.00 4792 Set of nine DALL screwdrivers. Content: r 4722: size ( x 5.5 x 00 mm) size 2 (.2 x 6.5 x 25 mm) size 3 (.2 x 8x 50 mm) size 4 (.6 x 0 x 75 mm) r 4724: size 2 ( x 5.5 x 25 mm) r 4728: size (0.4 x 2.5 x 50 mm) k 4730: size k 4732: size 2 k 4734: size 2 DALL set of screwdrivers g S 9647920 745 0.00 4793 Set of five DALL screwdrivers. Content: r 4720: size 2 (0.8 x4x00mm) r 4722: size ( x 5.5 x 00 mm) size 2 (.2 x 6.5 x 25 mm) k 4730: size k 4732: size 2 DALL set of screwdrivers g S 9647930 387 0.00 4794 Set of nine DALL screwdrivers for TOX screws Content: n 4750: T8, T9, T0, T5, T20, T25, T27, T30, T40 n DALL set of TOX screwdrivers g S 9647940 53 0.00 4799 Set of seven DALL screwdrivers for TOX screws (TOX TAMPE ESISTANT). Content: o 4756: T0, T5, T20, T25, T30, T40, T45 (with hollow point) o DALL set of TOX screwdrivers g S 9647990 475 0.00 4 73
ES 4720/4730/7 TCS 4720/4730 xö 75 x 350 x 33 mm, 7 pieces g 968386 544 0.00 No 4720 size (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4 x 00 mm); size 4 ( x 5.5 x 25 mm); size 5 (.2 x 6.5 x 50 mm) No 4730 sizes ; 2; 3 8382026 Empty tray 0.00 ES 4720/4722/4732/7 75 x 350 x 35 mm, 7 pieces g 9683878 475 0.00 No 4720 size (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4 x 00 mm); size 4 ( x 5.5 x 25 mm); size 5 (.2 x 6.5 x 50 mm) No 4730 sizes ; 2; 3 TCS 4720/4760VDE+0767 xö 4 75 x 350 x 35 mm, 7 pieces g 9683833 575 0.00 No 4720 size (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4 x 00 mm) No 4722 size ( x 5.5 x 00 mm); size 2 (.2 x 6.5 x 25 mm) No 4732 sizes ; 2; 3 8382026 Empty tray 0.00 ES 4756/7 75 x 350 x 39 mm, 7 pieces g 968388 500 0.00 No 4756 sizes T0; T5; T20; T25; T30; T40; T45 8382039 Empty tray 0 0.00 530 x 350 x 35 mm, 27 pieces g 9683068 925 0.00 No 4720 No 4724 No 4728 No 4730 sizes ; 2; 3 No 4732 size 4 No 4734 size 2 No 4740 sizes 0; ; 2 No 4744 size No 4760 VDE No 0767/9 size (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4 x 00 mm); size 5 (.2 x 6.5 x 50 mm); size 6 (.6 x 8 x 75 mm); size 7 (.6 x 0 x 200 mm); size 8 (2 x 2 x 200 mm) size 2 ( x 5.5 x 25 mm) size (0.4 x 2.5 x 50 mm) size (0.4 x 2.5 x 75 mm) sizes.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm 74
4720 r Workshop screwdrivers DALL 4728 r Electricians screwdrivers DALL DIN 5263/5264, ISO 2380, Chrome Alloy Steel, chrome plated, black tips. DIN 5265, ISO 2380, Chrome Alloy Steel, chrome plated, black tips. a b L L 2 size mm mm mm mm g S 4720035 0.6 3.5 75 60 23 0 0.00 4720040 2 0.8 4 00 95 32 0 0.00 4720055 3 5.5 00 95 50 0 0.00 47202055 4 5.5 25 220 54 0 0.00 4720065 5.2 6.5 50 255 8 0 0.00 4720080 6.6 8 75 290 8 0 0.00 472000 7.6 0 200 35 69 5 0.00 4720200 8 2 2 250 375 28 5 0.00 472 parallel blades, as per VSM (Swiss Standard), Chrome Alloy Steel, chrome plated, black tips. r Workshop screwdrivers DALL a b L L 2 size mm mm mm mm g S 472025 0 0.4 2.5 80 65 22 0 0.00 472035 0.5 3.5 90 75 24 0 0.00 472040 2 0.6 4 00 85 28 0 0.00 472055 3 0.8 5.5 20 25 43 0 0.00 472065 4 6.5 40 245 79 0 0.00 472080 5.2 8 60 275 5 0 0.00 47200 6.6 0 80 305 62 0 0.00 47230 7 2 3 200 325 93 0 0.00 47260 8 2.5 6 220 345 23 0 0.00 47280 9 3 8 240 365 276 0 0.00 4722 r Workshop screwdrivers DALL a b L L 2 size mm mm mm mm g S 4728025 0.4 2.5 50 25 25 0 0.00 4728035 2 0.6 3.5 75 60 25 0 0.00 4728040 3 0.6 3.5 00 85 26 0 0.00 47282040 4 0.8 4.0 25 20 3 0 0.00 4728050 5 5.5 50 245 53 0 0.00 47282050 6 5.5 200 295 62 0 0.00 4729 DIN 5265, ISO 2380, sleeved blades, Chrome Alloy Steel, chrome plated, black tips. r Electricians screwdrivers DALL a b L L 2 size mm mm mm mm g S 4729025 0.4 2.5 50 25 4 0 0.00 4729035 2 0.6 3.5 75 60 26 0 0.00 47292035 3 0.6 3.5 00 85 26 0 0.00 4729040 4 0.8 4 25 20 33 0 0.00 4729055 5 5.5 50 245 55 0 0.00 47293055 6 5.5 200 295 68 0 0.00 4730 Phillips-ecess, DIN 5262, ISO 8764, Chrome Alloy Steel, chrome plated, black tips. k Cross-head screwdrivers DALL 4 DIN 5265, ISO 2380, with hexagon, Chrome Alloy Steel, chrome plated, black tips. a b L L 2 size mm mm mm mm g S 4722055 5.5 00 95 55 0 0.00 4722070 2.2 6.5 25 230 84 0 0.00 4722090 3.2 8 50 265 27 0 0.00 472200 4.6 0 75 290 58 0 0.00 472220 5 2 2 200 325 23 5 0.00 472230 6 2.5 4 250 375 3 5 0.00 4724 DIN 5265, ISO 2380, stubby, Chrome Alloy Steel, chrome plated, black tips. r Carburettor screwdrivers DALL a b L L 2 size mm mm mm mm g S 4724045 0.6 3.5 25 80 27 0 0.00 4724060 2 5.5 25 80 32 0 0.00 4724080 3.2 8 25 80 39 0 0.00 PH L L 2 size mm mm g S 4730000 0 60 35 6 0 0.00 473000 80 75 33 0 0.00 4730002 2 00 205 70 0 0.00 4730003 3 50 265 26 0 0.00 473 Phillips-ecess, extra long, DIN 5262, ISO 8764, Chrome Alloy Steel, chrome plated, black tips. k Cross-head screwdrivers DALL PH L L 2 size mm mm g S 47300 250 345 66 0.00 473002 2 250 355 03 0.00 75
4732 k Cross-head screwdrivers DALL 4740 l Cross-head screwdrivers DALL with hexagon, Phillips-ecess, DIN 5262, ISO 8764, Chrome Alloy Steel, chrome plated, black tips. POZIDIV/SUPADIV, DIN 5262, ISO 8764, Chrome Alloy Steel, chrome plated, black tips. PH L L 2 size mm mm g S 473200 80 75 36 0 0.00 4732002 2 00 205 8 0 0.00 4732003 3 50 265 44 5 0.00 4732004 4 200 325 25 5 0.00 4734 Phillips-ecess, DIN 5262, ISO 8764, stubby, Chrome Alloy Steel, chrome plated, black tips. k Cross-head screwdrivers DALL PZ L L 2 size mm mm g S 4740000 0 60 35 6 0 0.00 474000 80 75 34 0 0.00 4740002 2 00 205 72 0 0.00 4740003 3 50 265 28 5 0.00 4740004 4 200 325 22 5 0.00 4744 POZIDIV/SUPADIV, DIN 5262, ISO 8764, stubby, Chrome Alloy Steel, chrome plated, black tips. l Cross-head screwdrivers DALL 4 PH L L 2 size mm mm g S 473400 25 80 27 0 0.00 4734002 2 25 80 3 0 0.00 4735 TI-WING, hexagonal blade, phosphatized. s Screwdrivers DALL L L 2 outside No mm mm E" g S 47350002 2 80 75 /4 60 5 0.00 47350003 3 00 205 /4 77 5 0.00 47350004 4 00 205 /4 76 5 0.00 47350005 5 00 205 /4 98 5 0.00 4736 TOQ-SET, hexagonal blade, phosphatized. t Screwdrivers DALL L L 2 outside No mm mm E" g S 47360002 2 80 75 /4 59 5 0.00 47360004 4 80 75 /4 58 5 0.00 47360006 6 00 205 /4 76 5 0.00 47360008 8 00 205 /4 76 5 0.00 4736000 0 00 205 /4 77 5 0.00 4736006 /4 50 265 5/6 33 5 0.00 PZ L L 2 size mm mm g S 474400 25 80 28 0 0.00 4744002 2 25 80 34 0 0.00 4748 for use on hexagon socket head screws, swivel angle up to 25 each side, Chrome Alloy Steel, chrome plated, black tips. i Ball ended hexagon drivers DALL B L L 2 mm mm mm g S 4748030 3 00 85 29 0 0.00 4748040 4 00 85 30 0 0.00 4748050 5 00 95 54 0 0.00 4748060 6 25 230 82 0 0.00 4748080 8 50 265 43 0 0.00 474800 0 50 275 209 0 0.00 474820 2 50 275 268 0 0.00 0507KK for use on hexagon socket head screws, swivel angle up to 25 each side, Chrome Alloy Steel, chrome plated, black tips. i Ball ended hexagon drivers DALL B L L 2 mm mm mm g S 7300005 5 300 385 89 0 0.00 76
4750 for inside TOX screws, Chrome Alloy Steel, chrome plated, black tips. n TOX screwdrivers DALL C L L 2 size mm mm mm g S 4750006 T6.6 50 25 4 5 0.00 4750007 T7 2.0 50 25 4 5 0.00 4750008 T8 2.3 60 45 2 5 0.00 4750009 T9 2.5 60 45 2 5 0.00 475000 T0 2.7 80 75 26 5 0.00 475005 T5 3.3 80 75 28 5 0.00 4750020 T20 3.8 00 95 32 5 0.00 4750025 T25 4.4 00 95 55 5 0.00 4750027 T27 5.0 5 20 58 5 0.00 4750030 T30 5.5 5 20 63 5 0.00 4750040 T40 6.6 5 220 86 5 0.00 4750045 T45 7.8 30 235 07 5 0.00 4750L for inside TOX screws, extra long, Chrome Alloy Steel, chrome plated, black tips. n TOX screwdrivers DALL C L L 2 size mm mm mm g S 47505 T5 3.3 250 345 42 5 0.00 475020 T20 3.8 250 345 49 5 0.00 475025 T25 4.4 250 345 56 5 0.00 475030 T30 5.5 250 345 94 5 0.00 4756 o TOX screwdrivers DALL with hollow point (TOX TAMPE ESISTANT), Chrome Alloy Steel, chrome plated, black tips. Electronics Screwdrivers 4797 7 pieces Content: r 475: size 4 (0.3 x.5 x 40 mm) size 6 (0.4 x2x60mm) size 7 (0.4 x 2.5 x 75 mm) size 8 (0.5 x3x75mm) k 4752: size 00, size 0, size Electronics screwdrivers set g S 9647970 302 0.00 475 r Screwdrivers for slotted screws a b L L 2 size mm mm mm mm g S 475000 0.6 0.8 40 40 2 5 0.00 4750002 2 0.8 40 40 2 5 0.00 4750003 3 0.25.2 40 40 2 5 0.00 4750004 4 0.3.5 40 40 2 5 0.00 4750005 5 0.3.8 60 60 3 5 0.00 4750006 6 0.4 2 60 60 3 5 0.00 4750007 7 0.4 2.5 75 75 4 5 0.00 4750008 8 0.5 3 75 75 6 5 0.00 475000 0 0.6 3.5 00 200 20 5 0.00 475002 2 0.8 4 00 200 23 5 0.00 4 4752 Phillips-ecess. k Cross-head screwdrivers C L L 2 size mm mm mm g S 4756000 T0 2.7 80 75 27 5 0.00 4756005 T5 3.3 80 75 29 5 0.00 47560020 T20 3.8 00 95 35 5 0.00 47560025 T25 4.4 00 95 38 5 0.00 47560030 T30 5.5 5 20 60 5 0.00 47560040 T40 6.6 5 220 86 5 0.00 47560045 T45 7.8 30 235 07 5 0.00 4798 pieces Content: r 0.6 x 3.5; 0.8x 4.0;.0 x 5.5;.2 x 6.5 mm k sizes ; 2 l sizes ; 2 i 3; 4; 5; 6 mm i 3; 4; 5; 6 mm (ball end) n T0; T5; T20; T25; T30; T40 Set of reversible screwdrivers L L 2 k americ. O size mm mm M No. mm g S 47520000 000 40 40 2 3 5 0.00 4752000 00 40 40 2.5 4 5 0.00 47520020 0 60 60 2 0 3 6 5 0.00 4752000 80 80 2 3 2 4 4.5 24 5 0.00 475200 50 250 2 3 2 4 4.5 33 5 0.00 4753 i Hexagon socket screwdrivers B L L 2 mm/" mm mm g S 47530007 0.7 / 0.028 40 40 4 5 0.00 47530009 0.9 / 0.035 40 40 4 5 0.00 4753003.3 / 0.050 40 40 4 5 0.00 4753005.5 50 50 4 5 0.00 47530020 2 50 50 4 5 0.00 47530025 2.5 60 60 4 5 0.00 47530030 3 60 60 6 5 0.00 g S 9647980 675 0.00 77
4 VDE-insulated Screwdrivers to DIN IEC 78 (CO) /VDE 0680 part 20/07.83 resp. IEC 900 987 VTAC 000 V High quality materials and stringent tests guarantee safe use on "live" lines up to 000 V or 500 V DC. Individually tested at 0 000 V. 4795 VDE Screwdriver set DALL Set with 6 screwdrivers DALL, safety insulated. z AC 000 V VDE 680 part 20 Content: r 4760 VDE: size (0.4 x 2.5 x 75 mm) size 3 (0.6 x 3.5 x 00 mm) size 5 ( x 5.5 x 25 mm) size 6 (.2 x 6.5 x 50 mm) k 4765 VDE: size, size 2 g S 9647950 440 0.00 4760 VDE r Electricians screwdrivers DALL DIN 7437, DIN EN 60900, safety insulated, blade gun finished, Chrome Alloy Steel. a b L L 2 size mm mm mm mm g S 476000 0.4 2.5 75 50 6 0 0.00 4760002 2 0.5 3 00 75 20 0 0.00 4760003 3 0.6 3.5 00 85 28 0 0.00 4760004 4 0.8 4 00 95 36 0 0.00 4760005 5 5.5 25 230 76 0 0.00 4760006 6.2 6.5 50 255 93 0 0.00 4760007 7.2 8 75 290 47 0 0.00 4760008 8.6 0 200 35 29 0 0.00 4770 VDE POZIDIV/SUPADIV, DIN 7438, DIN EN 60900, safety insulated, blade gun finished, Chrome Alloy Steel. l Cross-head screwdrivers DALL PZ L L 2 size mm mm g S 4770000 0 60 35 7 0 0.00 477000 80 75 37 0 0.00 4770002 2 00 205 76 0 0.00 4770003 3 50 265 40 0 0.00 4770004 4 200 325 228 0 0.00 054 r Engineers screwdrivers with hexagon, DIN 475, hardwood, handle with leather cap, full length tang, Chrome Alloy Steel, chrome plated. a b L L 2 size mm mm mm mm g S 73300 0.8 5.5 00 200 65 0 0.00 733002 2 7 25 235 04 0 0.00 733003 3.2 9 50 270 62 0 0.00 733004 4.6 0 75 300 22 0 0.00 733005 5 2 2 200 330 264 0 0.00 733006 6 2.5 3 250 380 346 5 0.00 0554 built to conform to the new EN standard, tested to conform to the currently valid VDE GS standard, with plastic handle, AC 25 250 V. r EUO voltage tester a b L mm mm mm g S 7745000 3.5 90 37 0 0.00 ES 2500/7 4765 VDE k Cross-head screwdrivers DALL Phillips-ecess, DIN 7438, DIN EN 60900, safety insulated, blade gun finished, Chrome Alloy Steel. PH L L 2 size mm mm g S 4765000 0 60 35 7 0 0.00 476500 80 75 36 0 0.00 4765002 2 00 205 76 0 0.00 4765003 3 50 265 34 0 0.00 4765004 4 200 325 234 0 0.00 75 x 350 x 30 mm, 7 pieces g 9683870 969 0.00 No 2500 sizes 7; 8; 9; 0; ; 2; 3 mm 8382085 Empty tray 03 0.00 78
2500 DIN 325 (metric), Chrome Vanadium, chrome plated. c Nut spinners DALL 2507-2K c T-handled nut spinners with 2-component T-handle, Chrome Vanadium, matt chrome plated. A L L 2 mm mm mm g S 43090003 3 25 230 68 0 0.00 43090035 3.5 25 230 72 0 0.00 43090004 4 25 230 72 0 0.00 43090045 4.5 25 230 7 0 0.00 43090005 5 25 230 73 0 0.00 43090055 5.5 25 230 73 0 0.00 43090006 6 25 230 74 0 0.00 43090007 7 25 240 06 0 0.00 43090008 8 25 240 09 0 0.00 43090009 9 25 240 0 0 0.00 4309000 0 25 240 38 0 0.00 430900 25 250 69 5 0.00 4309002 2 25 250 72 5 0.00 4309003 3 25 250 73 5 0.00 4309004 4 25 250 8 5 0.00 4309005 5 25 250 92 5 0.00 4309006 6 25 250 89 5 0.00 4309007 7 25 250 99 5 0.00 2500a c Nut spinners DALL A L L 2 " mm mm g S 43490008 /8 25 230 68 0 0.00 4349000 5/32 25 230 70 0 0.00 4349002 3/6 25 230 73 0 0.00 4349004 7/32 25 230 75 0 0.00 4349006 /4 25 240 03 0 0.00 4349008 9/32 25 240 0 0 0.00 43490020 5/6 25 240 08 0 0.00 43490022 /32 25 240 06 0 0.00 43490024 3/8 25 240 3 0 0.00 43490028 7/6 25 250 59 5 0.00 43490032 /2 25 250 76 5 0.00 43490034 9/6 25 250 69 5 0.00 43490036 5/8 25 250 85 5 0.00 2506N flexible, max. torque 8 N m, matt chrome plated. c Nut spinners DALL A L L 2 mm mm mm g S 430005 5 50 255 48 0 0.00 430006 6 50 255 06 0 0.00 430007 7 50 255 48 0 0.00 430008 8 50 255 09 0 0.00 43000 0 75 280 68 0 0.00 A L L 2 mm mm mm g S 43232040 4 200 225 65 0 0.00 43232045 4.5 200 226 65 0 0.00 43232050 5 200 226 66 0 0.00 43232055 5.5 200 225 66 0 0.00 43232060 6 200 224 83 0 0.00 43232070 7 200 234 33 0 0.00 43232080 8 200 234 35 0 0.00 43232090 9 200 234 37 0 0.00 4323200 0 200 234 4 0 0.00 432320 200 240 69 5 0.00 4323220 2 200 240 7 5 0.00 4323230 3 200 240 76 5 0.00 0546 r Offset screwdrivers DIN 5200, for slotted screws, centre handle covered with impact proof plastic, Chrome Vanadium, chrome plated. a b L size mm mm mm g S 7327200 0.6 3.5 90 8 0 0.00 73272002 2 0.8 4 00 2 0 0.00 73272003 3 5.5 25 29 0 0.00 73272004 4.2 8 50 69 0 0.00 73272005 5.6 0 75 05 0 0.00 73272006 6 2 2 200 49 0 0.00 055 DIN 5208, for recessed head screws, Phillips-ecess, centre handle covered with impact proof plastic, Chrome Vanadium, chrome plated. k Offset screwdrivers PH L size mm g S 7328202 x 2 25 30 0 0.00 73282023 2 x 3 50 72 0 0.00 73282034 3 x 4 200 48 0 0.00 4 79
Hexagon key wrenches on ring, for socket head screws, Chrome Vanadium, nickel-plated. 0760CV i Hexagon key wrenches DIN ISO 2936 (metric), for socket head screws, Chrome Vanadium, nickel-plated. 4 No g S 964352 0760CV /8 ) 260 0.00 9643552 0760aCV /8 2 ) 9 0.00 ) Content: 2; 2.5; 3; 4; 5; 6; 8; 0 mm 2 ) Content: /6; 5 /64; 3 /32; /8; 5 /32; 3 /6; 7 /32; /4" Hexagon key wrenches in holder, for socket head screws, Chrome Vanadium, nickel-plated. No g S 964350 0760CV/9 ) 245 0.00 9643550 0760aCV/0Pc 2 ) 269 0.00 96435502 0760aCV/3 3 ) 24 0.00 ) Content:.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm 2 ) Content: /6; 5 /64; 3 /32; /8; 5 /32; 3 /6; 7 /32; /4; 5 /6; 3 /8" (in plastic-wallet) 3 ) Content (in two holders): 0.028; 0.035; 0.050; /6; 5 /64; 3 /32; 7 /64; /8; 9 /64; 5/32; 3 /6; 7 /32; /4" B L L 2 mm/" mm mm g S 4350070 0.7/0.028 8 32 0 0.00 4350090 0.9/0.035 0 32 0 0.00 435030.3/0.050 2 40 0 0.00 435050.5 4 45 0 0.00 4350002 2 6 50 2 0 0.00 4350250 2.5 8 56 3 0 0.00 4350003 3 20 63 4 0 0.00 4350350 3.5 22 66 7 0 0.00 4350004 4 25 70 0 0 0.00 4350005 5 28 80 8 0 0.00 4350006 6 32 90 29 0 0.00 4350007 7 34 95 42 0 0.00 4350008 8 36 00 59 0 0.00 4350009 9 38 05 80 0 0.00 435000 0 40 2 03 0 0.00 43500 42 9 30 0 0.00 435002 2 45 25 69 5 0.00 435004 4 56 40 26 5 0.00 435007 7 63 60 442 5 0.00 435009 9 70 80 603 5 0.00 4350022 22 80 200 938 0.00 4350024 24 90 224 248 0.00 4350027 27 00 250 692 0.00 4350030 30 2 280 2434 0.00 4350032 32 25 35 37 0.00 4350036 36 40 355 4430 0.00 0760aCV i Hexagon key wrenches B L L 2 mm/" mm mm g S 4350070 0.7/0.028 8 32 0 0.00 4350090 0.9/0.035 0 32 0 0.00 435030.3/0.050 2 40 0 0.00 43550003 3/64 4 45 0 0.00 43550004 /6 5 45 0 0.00 43550005 5/64 6 50 2 0 0.00 43550006 3/32 7 5 3 0 0.00 43550007 7/64 20 54 4 0 0.00 43550008 /8 22 57 5 0 0.00 43550009 9/64 23 63 7 0 0.00 4355000 5/32 25 65 0 0 0.00 4355002 3/6 29 70 5 0 0.00 4355004 7/32 32 80 23 0 0.00 4355006 /4 32 87 32 0 0.00 4355008 9/32 35 95 45 0 0.00 43550020 5/6 40 98 59 0 0.00 43550022 /32 4 05 75 0 0.00 43550024 3/8 45 0 95 0 0.00 43550028 7/6 48 24 43 0 0.00 43550032 /2 50 33 200 5 0.00 43550034 9/6 57 52 380 5 0.00 43550036 5/8 59 60 380 5 0.00 43550040 3/4 70 80 605 5 0.00 43550044 7/8 80 200 945 0.00 80
0765/9 for socket head screws, DIN ISO 2936, extra long, in holder, Chrome Vanadium, nickel-plated. Content:.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm 0765 i Hexagon key wrenches g S 964320 40 5 0.00 i Hexagon key wrenches DIN ISO 2936, for socket head screws, extra long, Chrome Vanadium, nickel-plated. B L L 2 mm mm mm g S 432005.5 4 90 3 0 0.00 4320002 2 6 00 3 0 0.00 4320025 2.5 8 2 5 0 0.00 4320003 3 20 26 9 0 0.00 4320004 4 25 40 7 0 0.00 4320005 5 28 60 3 0 0.00 4320006 6 32 80 50 0 0.00 4320007 7 34 90 74 0 0.00 4320008 8 36 200 00 0 0.00 4320009 9 38 20 35 0 0.00 432000 0 40 224 79 0 0.00 432002 2 45 250 287 5 0.00 432004 4 56 280 440 5 0.00 432007 7 63 320 742 5 0.00 432009 9 70 360 048 5 0.00 Key wrenches for inside TOX screws, in holder, Chrome Vanadium, chrome plated. 0766 n Key wrenches for inside TOX screws, Chrome Vanadium, chrome plated. C L L 2 size mm mm mm g S 43220006 T6.6 6 38 2 0 0.00 43220007 T7 2.0 6 4 2 0 0.00 43220008 T8 2.3 6 44 3 0 0.00 43220009 T9 2.5 6 48 3 0 0.00 4322000 T0 2.7 7 5 3 0 0.00 4322005 T5 3.3 8 54 5 0 0.00 43220020 T20 3.8 9 57 7 0 0.00 43220025 T25 4.4 20 60 9 0 0.00 43220027 T27 5.0 2 64 5 0 0.00 43220030 T30 5.5 24 70 20 0 0.00 43220040 T40 6.6 26 76 29 0 0.00 43220045 T45 7.8 29 83 42 0 0.00 43220050 T50 8.8 32 95 6 0 0.00 43220055 T55.2 35 08 22 0 0.00 43220060 T60 3.2 38 20 85 0 0.00 077/6 077 n Key wrenches for inside TOX screws, extra long, with ball end on long arm, in holder, Chrome Vanadium, gun finished. Content: sizes T5; T20; T25; T27; T30; T40 g S 9643270 68 0.00 n Key wrenches for inside TOX screws, extra long, with ball end on long arm, swivel angle up to 20 each side, Chrome Vanadium, gun finish. 4 No g S 9643220 0766/6 ) 0 0.00 96432202 0766/9 2 ) 20 0.00 ) Content: sizes T5; T20; T25; T27; T30; T40 2 ) Content: sizes T8; T9; T0; T5; T20; T25; T27; T30; T40 C L L 2 size mm mm mm g S 4327000 T0 2.7 7 73 0 5 0.00 4327005 T5 3.3 9 83 5 5 0.00 43270020 T20 3.8 20 94 20 5 0.00 43270025 T25 4.4 20 96 24 5 0.00 43270027 T27 5.0 22 06 28 5 0.00 43270030 T30 5.5 26 9 30 5 0.00 43270040 T40 6.6 28 37 35 5 0.00 8
4 Ball ended hexagon key wrenches in holder, Chrome Vanadium, gunmetal finish. No g S 9643260 0767/9 ) 420 5 0.00 9643570 0767a/8 2 ) 283 0.00 96435702 0767a/3 3 ) 455 0.00 ) Content:.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm 2 ) Content: 5 /64; 3 /32; /8; 5 /32; 3 /6; 7 /32; /4; 5 /6" 3 ) Content: 0.050; /6; 5 /64; 3 /32; 7 /64; /8; 9 /64; 5 /32; 3 /6; 7 /32; /4; 5 /6; 3 /8" 0767 for hexagon socket head screws, with ball end on long arm, swivel angle up to 25 each side, Chrome Vanadium, gunmetal finish. 0767a i Ball ended hexagon key wrenches B L L 2 mm/" mm mm g S 4357030.3/0.050 2 72 0 0.00 4326005.5 4 90.5 0 0.00 43260002 2 6 00 3 0 0.00 43260025 2.5 8 2 5.5 0 0.00 43260003 3 20 26 9 0 0.00 43260004 4 25 40 8 0 0.00 43260005 5 28 60 3 0 0.00 43260006 6 32 80 50 0 0.00 43260008 8 36 200 00 0 0.00 4326000 0 40 224 88 0 0.00 4326002 2 45 224 297 0 0.00 i Ball ended hexagon key wrenches B L L 2 mm/" mm mm g S 4357030.3/0.050 2 72 0 0.00 43570004 /6 4 80.5 0 0.00 43570005 5/64 6 89 3 0 0.00 43570006 3/32 8 0 5 0 0.00 43570007 7/64 20 7 0 0.00 43570008 /8 20 2 9.5 0 0.00 43570009 9/64 23 36 3 0 0.00 4357000 5/32 25 49 6 0 0.00 4357002 3/6 26 63 27 0 0.00 4357004 7/32 29 70 42 0 0.00 4357006 /4 3 79 60 0 0.00 43570020 5/6 36 89 02 0 0.00 43570024 3/8 38 200 64 0 0.00 0767H/9 for recessed hexagonal screws, swivel angle up to 25 each side, from size 3 mm with ring, with ball end on long arm, facilitates quick, safe work in awkward places, screws stay on the head once attached, in holder, Chrome Vanadium, gunmetal finish. Content:.5; 2; 2.5; 3; 4; 5; 6; 8; 0 mm 0767H i Set: Ball ended hexagon key wrenches g S 96432602 40 5 0.00 i Ball ended hexagon key wrenches for hexagon key wrenches, swivel angle up to 25 each side, with ball end on long arm, facilitates quick, safe work in awkward places, screws stay on the head once attached, Chrome Vanadium, gunmetal finish. B L L 2 mm mm mm g S 4623003 3 27 23 8 0 0.00 4623004 4 4 28 7 0 0.00 4623005 5 65 34 30 0 0.00 4623006 6 85 38 50 5 0.00 4623008 8 205 45 00 5 0.00 462300 0 232 5 75 5 0.00 82
DIN ISO 32 74-2 k BITS DIN 328, for Phillips screws. kl TwinBITS with special profiles for recessed-head screws (PH) and POZIDIV/SUPADIV screws (PZ), high resistance to wear due to coating with hard material. Phillips- outside L No ecess E "mm g S 08000000 28 000 C 4-28 3 5 0.00 0800000 29 00 C 4-28 3 5 0.00 0800000 220 0 C 6.3 /4 25 5 0 0.00 080000 22 C 6.3 /4 25 5 0 0.00 0800002 222 2 C 6.3 /4 25 5 0 0.00 0800003 223 3 C 6.3 /4 25 5 0 0.00 0803000 23 C 8 5/6 32 9 0 0.00 08030002 232 2 C 8 5/6 32 0 0 0.00 08030003 233 3 C 8 5/6 32 0 0 0.00 08030004 234 4 C 8 5/6 32 2 0 0.00 outside E DIN 326/ISO 73 Phillips-ecess DIN 5260 extra hard for self tapping and other hardened screws. k BITS DIN 328, for Phillips screws. outside L No size E "mm g S 08000 PH/PZ22 C 6.3 /4 25 5 0 0.00 080002 PH/PZ222 2 C 6.3 /4 25 5 0 0.00 080003 PH/PZ223 3 C 6.3 /4 25 5 0 0.00 outside E DIN 326/ISO 73 203/7 TwinBITS set Storage facility for BITS screwdriver inserts. Content: quick-change holder No 3825/ for BITS screwdriver inserts kl6 TwinBITS screwdriver inserts with special profile for recessed-head screws (PH) and POZIDIV/SUPADIV screws (PZ) 2 x size ; 3 x size 2; x size 3 4 Phillips- outside L No ecess E "mm g S 0802000 22AA C 6.3 /4 25 5 0 0.00 08020002 222AA 2 C 6.3 /4 25 5 0 0.00 08020003 223AA 3 C 6.3 /4 25 5 0 0.00 outside E DIN 326/ISO 73 Phillips-ecess DIN 5260 for wood screws, mild steel screws etc. l BITS for POZIDIV/SUPADIV screws, extra hard. g S 960802 97 0.00 r BITS screwdrivers DIN 327/ISO 235, for slotted screws. POZIDIV/ outside L No SUPADIV E "mm g S 0805000 PZ22 C 6.3 /4 25 5 0 0.00 08050002 PZ222 2 C 6.3 /4 25 5 0 0.00 08050003 PZ223 3 C 6.3 /4 25 6 0 0.00 outside E DIN 326/ISO 73 a x b outside L No mm E "mm g S 0807007 57 0.25 x.5 C 4-28 3 5 0.00 0807008 58 0.4 x 2.0 C 4-28 3 5 0.00 0807009 59 0.4 x 2.5 C 4-28 3 5 0.00 08070020 60 0.5 x 3.0 C 6.3 /4 39 5 0 0.00 0807002 6 0.5 x 4.0 C 6.3 /4 39 6 0 0.00 08070022 62 0.6 x 3.5 C 6.3 /4 39 6 0 0.00 08070023 63 0.6 x 4.5 C 6.3 /4 39 6 0 0.00 08070024 64 0.8 x 4.0 C 6.3 /4 39 6 0 0.00 08070025 65 0.8 x 5.5 C 6.3 /4 39 7 0 0.00 08070026 66.0 x 5.5 C 6.3 /4 39 8 0 0.00 08070030 66/.2 x 6.5 C 6.3 /4 39 9 0 0.00 08070027 67.2 x 8.0 C 6.3 /4 39 2 0 0.00 08070028 68.6 x 8.0 C 6.3 /4 39 2 0 0.00 08070029 69.6 x 0.0 C 6.3 /4 39 6 0 0.00 08080030 80 0.8 x 5.5 C 8 5/6 4 0 0 0.00 0808003 8.0 x 5.5 C 8 5/6 4 0 0.00 08080032 82.2 x 6.5 C 8 5/6 4 3 0 0.00 08080033 83.2 x 8.0 C 8 5/6 4 5 0 0.00 08080034 84.6 x 8.0 C 8 5/6 4 5 0 0.00 08080035 85.6 x 0.0 C 8 5/6 4 9 0 0.00 08080036 86 2.0 x 2.0 C 8 5/6 4 24 0 0.00 outside E DIN 326/ISO 73 84
m BITS for tri-square socket head screws (XZN ). outside L No size E "mm g S 08200004 350 M4 C 6.3 /4 25 4 0 0.00 0820000 356 M5 C 6.3 /4 25 5 0 0.00 082000 357 M6 C 6.3 /4 25 5 0 0.00 0820002 358 M8 C 8 5/6 28 0 0 0.00 0820003 359 M0 C 8 5/6 38 5 0 0.00 0820004 360 M2 C 8 5/6 38 20 0 0.00 outside E DIN 326/ISO 73 DIN 65254 (M4, M5, M6) Application: No 350, size M4, for door lock attachment on the Audi TT, VW Golf, Bora, Passat B5, Lupo, New Beetle 299 i BITS for inside hexagon screws, for operating the adjusting screws on torque wrenches No 720, 72, 730 and 730N. B outside L mm E "mm g S 08090002 2 C 6.3 /4 34 4 0 0.00 outside E DIN 326/ISO 73 3008 for TI-WING screws s BITS screwdrivers TI- outside L WING E "mm g S 08250000 0 C 6.3 /4 25 5 0 0.00 0825000 C 6.3 /4 25 5 0 0.00 08250002 2 C 6.3 /4 25 5 0 0.00 08250003 3 C 6.3 /4 25 5 0 0.00 08250004 4 C 6.3 /4 25 5 0 0.00 08250005 5 C 6.3 /4 25 5 0 0.00 08250006 6 C 6.3 /4 25 8 0 0.00 outside E DIN 326/ISO 73 300 for TOQ-SET screws. t BITS screwdrivers TOQ- outside L SET E "mm g S 08260000 0 C 6.3 /4 25 5 0 0.00 0826000 C 6.3 /4 25 5 0 0.00 08260002 2 C 6.3 /4 25 5 0 0.00 08260003 3 C 6.3 /4 25 5 0 0.00 08260004 4 C 6.3 /4 25 5 0 0.00 08260005 5 C 6.3 /4 25 5 0 0.00 08260006 6 C 6.3 /4 25 5 0 0.00 08260008 8 C 6.3 /4 25 5 0 0.00 0826000 0 C 6.3 /4 25 5 0 0.00 0826006 /4 A C 8 5/6 32 0 0.00 08260020 5/6 A C 8 5/6 32 0 0.00 08260024 3/8 A C 8 5/6 32 0 0.00 outside E DIN 326/ISO 73 Spinner handles for BITS screwdriver bits with outside hexagon /4" or 5 /6" DIN 326/ISO 73 Form C 6.3 or C 8, handle of impact proof plastic. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). inside d L L 2 No b "mm mm mm g S 8070026 4000 D 6.3 /4 75 80 03 5 0.00 8070030 4005 D 8 5/6 3 85 90 5 0.00 inside b DIN 326/ISO 73 4006/ Spinner with magazine holder for 6 BITS screwdriver bits (25 mm) with /4" outer hexagon, DIN 326/ISO 73 Type C 6.3, transparent plastic handle for storing BITS with rotating selection cap, internal hexagon and powerful permanent magnet. inside d L L 2 b "mm mm mm g S 808007 D 6.3 /4 0 20 230 24 0.00 inside b DIN 326/ISO 73 2504N BIT holder for BITS screwdriver bits with outside hexagon /4" DIN 326/ISO 73 Form C 6.3, flexible shaft, handle of impact proof plastic. inside L L 2 b "mm mm g S 8006 D 6.3 /4 50 260 49 0 0.00 inside b DIN 326/ISO 73 2503 BIT holder for BITS screwdriver bits with outside hexagon /4" DIN 326/ISO 73 Form C 6.3, inside hexagon with magnet, stubby version, handle of impact proof plastic. inside L L 2 b "mm mm g S 8006 D 6.3 /4 0 65 46 0 0.00 inside b DIN 326/ISO 73 4 85
4 4007 45SGB BIT holder for BITS screwdriver bits with outside hexagon /4" DIN 326/ISO 73 Form C 6.3, inside hexagon with magnet, with T-handle. inside d L L 2 b "mm mm mm g S 809006 D 6.3 /4 0 200 65 08 5 0.00 inside b DIN 326/ISO 73 Bit ratchet reversible, all steel handle, for BITS screwdrivers with outside hexagon /4" DIN 326/ISO 73 Form C 6.3, 22 teeth. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). inside L b "mm g S 300 D 6.3 /4 7 85 5 0.00 inside b DIN 326/ISO 73 435B Bit ratchet reversible, for BITS screwdrivers with outside hexagon 5 /6" DIN 326/ISO 73 Form C 8, 30 teeth. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). inside L b "mm g S 2300 D 8 5/6 93 220 0.00 inside b DIN 326/ISO 73 25B atcheting bit holder for hexagon bits, magnetic location, reversible heads angled, chrome plated. inside L d d 2 a a 2 b "mm mm mm mm mm g S 454620 /4 x 5 /6 38 20 23 5 7 05 0.00 4008 atcheting bit holder Positions selectable are clockwise/anticlockwise/fixed with fixed blade. Inner hex. with magnet, for screwdriver bits with outside hexagon /4" DIN 326/ISO 73 Form C 6.3. The square drive extension No 35/ can be used to adapt /4" socket inserts (outer hex. to /4" outer square). The ratcheting bit holder is fitted with a quick-twist knurled socket to allow the user to tighten or untighten loosely by hand. Socket mountings are toothed, heavy-duty and angled at 30. Ergonomically shaped handle with /4" inner square drive for use with cross handle, extension bar etc. inside L L 2 d b "mm mm mm g S 820000 D 6.3 /4 56 206.5 0 85 8 0.00 inside b DIN 326/ISO 73 4008/8 9 pieces. Content: atcheting bit holder No 4008 3 Bits k 22; 222; 223 3 Bits l PZ22; PZ222; PZ223 6 Bits o 440 T0; 44 T5; 442 T20; 443 T25; 445 T30; 446 T40 3 Bits i 30; 302; 303 3 Bits r 63 0.6 x 4.5; 65 0.8 x 5.5; 66/.2 x 6.5 mm atcheting bit holder set g S 968200 785 0.00 4008/27/ atcheting bit holder set 29 pieces. Content: atcheting bit holder No 4008 3 Bits k 22; 222; 223 3 Bits l PZ 22; PZ 222; PZ 223 6 Bits o 440 T0; 44 T5; 442 T20; 443 T25; 45 T30; 446 T40 3 Bits i 30; 302; 303 3 Bits r 63 0.6 x 4.5; 65 0.8 x 5.5; 66/.2 x 6.5 mm Square drive extension No 35/ with /4" outer hex. and outer square drives for attaching /4" u sockets 9 Sockets No 40, /4" u sizes 4; 5; 5.5; 6; 7; 8; 0; ; 3 mm g S 968202 025 0.00 86
35/2 200/ BIT holder with permanent magnet /4" inside and outside hexagon /4" DIN 326/ISO 73 Form C 6.3. inside outside L b " E "mm g S 382000 D 6.3 /4 E 6.3 /4 72 37 5 0.00 inside b/outside E DIN 326/ISO 73 3825/ BIT holder for torque screwdrivers No 760 and No 775, inside hexagon DIN 326 D4 for BITS screwdriver bits Type C4, outside hexagon /4" DIN 326/ISO 73 Form E 6.3. inside outside L b E "mm g S 350003 4 mm E 6.3 /4 60 8 0.00 outside E DIN 326/ISO 73 Quick-change holder for BITS screwdriver bits with /4" external hexagonal drive DIN 326/ISO 73 Type C 6.3, with quick-action chuck, adaptor with external hexagonal drive for powered use. inside outside L b " E "mm g S 38250002 D 6.3 /4 E 6.3 /4 62 27 0.00 inside b/outside E DIN 326/ISO 73 35 Adaptor for torque screwdrivers No 760 and No 775 for manually operated sockets with recessed 6.3 ( /4") square drive DIN 320/ISO 74- Type C and D, square drive with ball bearing, Chrome Alloy Steel, gunmetal finish. outside outside L d D " E "mm mm g S 35000 A 6.3 /4 E 6.3 /4 50 0.5 6 5 0.00 outside D DIN 320/ISO 74- outside E DIN 326/ISO 73 Adaptors DIN 7428/ISO 337, with outside hexagon for power operated IMPACT sockets DIN 329/ISO 2725-2 with inside square DIN 32/ISO 74-2. Large collar diameter for better support of IMPACT sockets. Square drive with spring loaded locking pin, Chrome Alloy Steel, gunmetal finish. outside outside L d No D " E "mm mm g S 36000 36/ 6.3 /4 E 6.3 /4 50 0.5 6 5 0,00 326000 326/ 0 3/8 E 6.3 /4 50 5.5 23 5 0,00 3260002 326/2 0 3/8 E 6.3 /4 00 5.5 42 5 Außen D DIN 320/ISO 74- Außen E DIN 326/ISO 73 35/ Adaptor for manually operated sockets with recessed 6.3 ( /4") square drive DIN 320/ISO 74- Type C and D, square drive with ball bearing, Chrome Alloy Steel. outside outside L D " E "mm g S 350002 A 6.3 /4 C 6.3 /4 25 0 5 0.00 outside D DIN 320/ISO 74- outside E DIN 326/ISO 73 k BITS screwdrivers DIN 328, for Phillips screws. Phillips- outside L No ecess E "mm g S 083000 260 E 6.3 /4 50 0 0 0.00 0830002 26 2 E 6.3 /4 50 0 0.00 0830003 262 3 E 6.3 /4 50 0 0.00 outside E DIN 326/ISO 73 Phillips-ecess DIN 5260 l BITS screwdrivers for POZIDIV/SUPADIV screws. POZIDIV/ outside L No SUPADIV E "mm g S 0832000 270 E 6.3 /4 50 0 0 0.00 08320002 27 2 E 6.3 /4 50 0 0.00 08320003 272 3 E 6.3 /4 50 0 0.00 outside E DIN 326/ISO 73 3006 Special socket registered design, for use on plugs in electronic rack Airbus A320 A340. outside O L E "mm mm g S 0823000 E 6.3 /4 50 0 0 0.00 outside E DIN 326/ISO 73 4 87
3007 BITS screwdriver for use on plugs in electronic rack Airbus A320 A340. k BITS screwdrivers for Phillips screws, for IMPACT driver No 4030. B outside L " E "mm g S 08240006 3/32 E 6.3 /4 50 0 5 0.00 outside E DIN 326/ISO 73 4060 IMPACT driver set for screw sizes M5 M0, in strong metal case. Content: each IMPACT driver No 4030 Adaptors No 4035; No 4036 r BITS screwdrivers for slotted screws No 4040 4044 k BITS screwdrivers for Phillips-screws No 4050 4052 i BITS screwdrivers for Hex. Socket Head screws No 4055 4058 Phillips- outside L No ecess E"mm g S 0840002 4050 2 3/8 35 7 0 0.00 0840003 405 3 3/8 35 7 0 0.00 0840004 4052 4 3/8 35 7 0 0.00 Phillips-ecess DIN 5260 i BITS screwdrivers for socket head screws, for IMPACT driver No 4030. B outside L No mm E"mm g S 08420005 4055 5 3/8 35 6 0 0.00 08420006 4056 6 3/8 35 6 0 0.00 08420008 4057 8 3/8 35 9 0 0.00 0842000 4058 0 3/8 35 23 0 0.00 4 g S 9632200 40 0.00 4030 IMPACT driver with inside hexagon for BITS screwdriver inserts No 4040 4058, suitable for screws M 5 M 0, torque 20 N m. inside L b "mm g S 3220000 3/8 38 67 0.00 Adaptors with outside hexagon, for IMPACT screwdriver No 4030. outside outside L No E" D "mm g S 322000 4035 3/8 3/8 38 34 0.00 332000 4036 3/8 /2 38 43 0.00 r BITS screwdrivers for slotted screws, for IMPACT driver No 4030. a x b outside L No mm E"mm g S 0840000 4040.0 x 7 3/8 40 7 0 0.00 0840004 404.4 x 9 3/8 40 9 0 0.00 0840006 4042.6x0 3/8 40 2 0 0.00 08400020 4043 2.0x2 3/8 40 20 0 0.00 0840005 4044.5x3 3/8 40 24 0 0.00 08400025 4045 2.5x6 3/8 40 30 0 0.00 88
Service work & series production MANOSKOP indicating and cut-out This electromechanical torque wrench combines the "indicating" and "cut-out" functions in a single tool; the function modes can be selected independently of each other. With a mount for interchangeable sockets and inserts and Quickelease safety lock; rapid setting using the convenient foil keypad and large display; tactile and acoustic trigger signal. Differing tolerance limits can be set for each joint. Visual red and green signals in the display confirm the status of the joint. Display also works for anticlockwise torque. 7500 data records can be stored, transferred via a USB interface and evaluated on the PC. Automatic compensation to achieve correct tightening torque even if a changed extension is entered. Overload protection by means of acoustic and visual signals. The automatic keypad lock prevents inadvertent changes. Additional security for presets (function mode, trigger or preset value, unit of measurement, tolerance, save, deviating extension) using PIN code. All the sensitive components are protected by the sturdy housing. The 2-component handle with its ergonomically designed green softer layers is resistant to oils, grease, fuels, brake fluids and Skydrol. Included in the set are 2 AA NiMH rechargeable batteries,.2 V, 2300 mah. It is also possible to use.5 V AA batteries. Automatic notification of the next calibration date. Simple calibration and, if required, adjustment without disassembly using Torque Tester No 7707W. Units of measurement: N m, ft.lb, in.lb Guaranteed maximum accuracy deviation ± 2 %. With certificate. Not for sale in the USA due to Third Party patent rights. Our own patents are pending. (Inserts see pages 08-3) 730D Basic wrenches with tool carrier for insert tools 5 730D/20 Üü Setting/display resolution J b h L L F S F size W W W Nm ft.lb in.lb mm mm mm mm mm mm g 508200 0 0 00 N m 7.4 75 ft.lb 90 900 in.lb 0.2/0. 0.2/0. 2/.0 9 x 2 28 23 467 426.5 7.5 50 0.00 5082020 20 20 200 N m 5 50 ft.lb 80 800 in.lb 0.5/0. 0.5/0. 5/.0 4 x 8 28 23 548 55 25 430 0.00 5082040 40 40 400 N m 30 300 ft.lb 360 3600 in.lb.0/0..0/0. 0/.0 4 x 8 28 23 688 655 25 830 0.00 Available from spring 2007 730D in sturdy plastic case (size 40 in steel case) Basic wrench with ratchet insert tool 7757+7732 Documentation and management of readings on a PC USB cable and software for No 730D D size " g 965080 0 /2 663 0.00 9650820 20 /2 2078 0.00 9650840 40 3/4 5498 0.00 L m g 96583624.5 58 0.00 98
Service MANOSKOP 730N Clicking torque wrench with mount for interchangeable socket tools, rapid, accurate setting using QuickSelect quick-action adjuster, with Quickelease safety lock, double stop signals, very clear twin scales with colour coded N m/ft.lb and ft.lb/inch.lb markings and long-term repeated accuracy. The measuring element is only under load while force is being applied, no need for manual reset to zero. All the sensitive components are protected by the sturdy housing. The 2-component handle with its ergonomically designed green softer layers is resistant to oils, grease, fuels, brake fluids and Skydrol. Any force applied to the tool after the "click" or applied in the opposite direction to the current function e.g. forcible loosening of a jammed screw does not act on the trigger mechanism and cannot cause damage to it. The swap-over inserts can also be used to apply torque in an anticlockwise direction. Easily adjustable without disassembly, e.g. using tester No 7707 W. Guaranteed maximum accuracy deviation ± 3 %. With certificate. (Inserts see pages 08-3) 730N Basic wrenches with tool carrier for insert tools 730N/0 Üü Fine scale J b h L L F S F size W W X X X mm mm mm mm mm mm g 508002 2 2 20 N m 20 80 in.lb N m 0 in.lb 0.2 N m 9 x 2 28 23 275 226 7.5 740 0.00 508005 5 0 50 N m 7 37 ft.lb 5 N m ft.lb 0.25 N m 9 x 2 28 23 330 280.5 7.5 054 0.00 50800 0 20 00 N m 5 75 ft.lb 0 N m 2.5 ft.lb 0.5 N m 9 x 2 28 23 386 336 7.5 20 0.00 50802 2 25 30 N m 20 95 ft.lb 0 N m 2.5 ft.lb 0.5 N m 4 x 8 28 23 42 379 25 356 0.00 508020 20 40 200 N m 30 50 ft.lb 0 N m 5 ft.lb N m 4 x 8 28 23 467 424.5 25 489 0.00 508040 40 80 400 N m 60 300 ft.lb 20 N m 0 ft.lb 2 N m 4 x 8 28 23 607 564.5 25 888 0.00 508065 65 30 650 N m 00 480 ft.lb 50 N m 20 ft.lb 2.5 N m 4 x 8 30.6 25.6 890 848 25 3400 0.00 5058005 a/5 90 450 in.lb 7 37 ft.lb 50 in.lb ft.lb 2.5 in.lb 9 x 2 28 23 330 280.5 7.5 054 0.00 5058002 a/2 20 80 in.lb.5 5 ft.lb 0 in.lb 0.5 ft.lb 2 in.lb 9 x 2 28 23 275 226 7.5 740 0.00 505800 a/0 80 900 in.lb 5 75 ft.lb 00 in.lb 2.5 ft.lb 5 in.lb 9 x 2 28 23 386 336 7.5 20 0.00 5058020 a/20 350 800 in.lb 30 50 ft.lb 00 in.lb 5 ft.lb 0 in.lb 4 x 8 28 23 467 424.5 25 489 0.00 5058040 a/40 60 300 ft.lb 800 3600 in.lb 20 ft.lb 00 in.lb 2 ft.lb 4 x 8 28 23 607 564.5 25 888 0.00 5 Mechanical torque wrench 730N for rapid, accurate and safe working. Quickelease safety lock Firm locking and rapid change of insert tools thanks to the Quickelease safety lock. ing scale Fine setting for the black measuring range on the double scale No need for manual reset to zero thanks to the tried-andtested wear-free triggering cam system apid setting apid, accurate, safe setting action: pull out the knob, turn it to the required reading with just a few revolutions and push it in again to lock it. Easily readable double scale The colour differentiation between the Nm and ft.lb scales simplifies fine setting. 99
Service MANOSKOP 730 Torque wrenches offering quick adjustment, with cut-out, with Quickelease safety lock (size 5 65) dual signal (size 2 40), dual scale N m/ft.lb resp. N m/inch.lb. (size 5 80), long term accuracy and facility to accept insert/shell tools. The robust steel tube completely encloses all working parts. Any force applied to the tool after the "click" or applied in the opposite direction to the current function e.g. forcible loosening of a jammed screw does not act on the trigger mechanism and cannot cause damage to it. eversible insert/shell tools allow anticlockwise operation. ecalibration without dismantling using Torque Tester No 7707 W. Guaranteed accuracy ± 4 %. With certificate. (Insert/shell tools see pages 08-3) 730 Basic wrenches with tool carrier for insert tools 730/2 J b h L L F S F size W X mm mm mm mm mm mm g 5080002 2 4 20 N m 0.5 N m 9 x 2 27.5 23 78.5 74 7.5 35 0.00 5080004 4 8 40 N m N m 9 x 2 27.5 23 222 28 7.5 395 0.00 50580002 a/2 30 75 in.lb 5 in.lb 9 x 2 27.5 23 78.5 74 7.5 35 0.00 50580004 a/4 70 350 in.lb 0 in.lb 9 x 2 27.5 23 222 28 7.5 395 0.00 730/5 5 Üü J b h L L F S F size W W X X mm mm mm mm mm mm g 5080005 5 6 50 N m 5 36 ft.lb 2 N m ft.lb 9 x 2 28 23 35 288 7.5 805 0.00 508000 0 20 00 N m 5 72.5 ft.lb 2.5 N m 2.5 ft.lb 9 x 2 28 23 370 343 7.5 020 0.00 508002 2 25 30 N m 20 95 ft.lb 2.5 N m 2.5 ft.lb 4 x 8 28 23 40 390 25 00 0.00 5080020 20 40 200 N m 30 45 ft.lb 5 N m 5 ft.lb 4 x 8 28 23 455 435 25 250 0.00 5080040 40 80 400 N m 60 300 ft.lb 0 N m 0 ft.lb 4 x 8 28 23 590 570 25 655 0.00 5080065 65 30 650 N m 00 480 ft.lb 20 N m 20 ft.lb 4 x 8 30.6 25.6 875 855 25 3480 0.00 50580005 a/5 6 50 N m 50 440 in.lb 2 N m 0 in.lb 9 x 2 28 23 35 288 7.5 805 0.00 5058000 a/0 20 00 N m 80 880 in.lb 2.5 N m 20 in.lb 9 x 2 28 23 370 343 7.5 965 0.00 5058002 a/2 25 30 N m 225 50 in.lb 2.5 N m 25 in.lb 4 x 8 28 23 40 390 25 00 0.00 50580020 a/20 40 200 N m 350 750 in.lb 5 N m 50 in.lb 4 x 8 28 23 455 435 25 250 0.00 730 Basic wrench with tool carrier for shell tools, registered design K b h L L F S F size W W X X mm mm mm mm mm mm g 5080080 80 60 800 N m 20 600 ft.lb 20 N m 20 ft.lb 24.5 x 28 46 43 970 990 95 4925 0.00 Use shell adaptor No 7370/80 to make 4 x 8 mm insert tools fit. 00
Standard MANOSKOP 720Nf Torque wrenches with dual "Stop" signal and cut-out, micrometer type adjustment, dual scale N m/ft.lb and long service life. obust steel tube and light alloy "U"-profile protect all working parts. Push through square drive for right and left hand tightening. ecalibration without dismantling using Torque Tester No 7707 W. Guaranteed accuracy ± 4 %. With certificate. 720Nf Torque wrench with square drive D b h L L F S F size W W X X " mm mm mm mm mm g 509008 80 60 800 N m 20 600 ft.lb 20 N m 20 ft.lb 3/4 45 42 034 938 0 5650 0.00 Plastic case, empty for safe storage and transport of torque wrenches (please order inlays separately). Supplied without torque wrench. for torque wrenches L No No mm g 8370002 730 720/5; 72/5; 72/5; 730/5; 730/0; 730/2; 730/20; 730a/5; 730a/0; 730a/2; 730a/20; 730N/5; 730N/0; 730N/2; 730N/20; 730Na/5; 730Na/0; 730Na/20; 730D/0 550 425 0.00 8370003 7302 720/30; 72/30; 730/40; 730N/40; 730Na/40; 730D/20 680 535 0.00 Inlays for plastic case for torque wrenches No g 8307004 720/5; 72/5; 72/5; 730/5; 730/0; 730/2; 730/20; 730a/5; 730a/0; 730a/2; 730a/20; 730N/5; 730N/0; 730N/2; 730N/20; 730Na/5; 730Na/0; 730Na/20; 730D/0 88 0.00 8307002 720/30; 72/30; 730/40; 730N/40; 730Na/40; 730D/20 3 0.00 299 i BITS for inside hexagon screws, for operating the adjusting screws on torque wrenches No 720, 72, 730 and 730N. B outside L mm E " mm g S 08090002 2 C 6.3 /4 34 4 0 0.00 08090002 2 C 6.3 /4 34 4 0 0.00 outside E DIN 326/ISO 73 5 0
Standard MANOSKOP 72 Torque wrenches with dual "Stop" signal and cut-out, rapid adjustment, dual scale N m/ft.lb and long service life. obust steel tube protects all working parts. Any force applied to the tool after the "click" or applied in the opposite direction to the current function e.g. forcible loosening of a jammed screw does not act on the trigger mechanism and cannot cause damage to it. ecalibration without dismantling using Torque Tester No 7707 W. Guaranteed accuracy ± 4 %. With certificate. 72 Torque wrenches with reversible ratchet 72/5 D b b 2 h h 2 L L F size W W X X " mm mm mm mm mm mm g 50200005 5 6 50 N m 5 36 ft.lb 2 N m ft.lb 3/8 28 27.5 23 4.5 352 293 900 0.00 5020005 5 30 50 N m 25 0 ft.lb 5 N m 5 ft.lb /2 28 4 23 8 452 387 305 0.00 50200030 30 60 300 N m 50 220 ft.lb 0 N m 0 ft.lb /2 28 44 23 27.5 553 486 720 0.00 size 30 with push through square drive Standard MANOSKOP 72Nf Torque wrenches with dual "STOP" signal and cut-out, micrometer type adjustment, dual scale N m/ft.lb and long service life. obust steel tube and light alloy "U"-profile protect all working parts. Push through square drive for right and left hand tightening. Easily adjustable without disassembly using tester No 7707 W. Guaranteed accuracy ± 4 %. With certificate. 5 72Nf Torque wrenches with ratchet 72Nf/80 72Nf/00 D b b 2 h L L F size W W X X " mm mm mm mm mm g 5020008 80 60 800 N m 20 600 ft.lb 20 N m 20 ft.lb 3/4 46.5 76 42 05 938 6770 0.00 9650200 00 200 000 N m 50 725 ft.lb 25 N m 25 ft.lb 3/4 46.5 76 42 504 365 6970 0.00 02
Industrial MANOSKOP 755 Torque wrenches with tool carrier for interchangeable insert tools, dual stop signal and cut-out. Especially light and handy. obust steel tube encloses all working parts. Any force applied to the tool after the "click" or applied in the opposite direction to the current function e.g. forcible loosening of a jammed screw does not act on the trigger mechanism and cannot cause damage to it. eversible insert tools enable anti-clock wise operation. Guaranteed accuracy ± 4 %. Industrial Manoskop No 755 is designed for continuous production work. Supplied without quick adjustment facility, the cut-out value has to be set using Torque Tester No 7707 W. If required, can be supplied with a preset trigger setting (price on application). (Inserts see pages 08-3) 755/ Industrial MANOSKOP Torque wrench with built-in ratchet, irrespective of the point of application of force, dual stop signal and cut-out. Guaranteed accuracy ± 4 %. Cut-out setting with aid of Setting Gauge. D b h L W W " mm mm mm g 500000.5 2.5 N m.0 9.0 ft.lb /4 22 8 73.5 335 0.00 755 Basic wrenches with tool carrier for insert tool J b h L L F S F size W W mm mm mm mm mm mm g 5000004 4 4 40 N m 4 30 ft.lb 9 x 2 22 8 20 72 7.5 522 0.00 500000 0 20 00 N m 5 74 ft.lb 9 x 2 28 24 38 289 7.5 635 0.00 5000020 20 40 200 N m 30 47 ft.lb 4 x 8 28 24 457 435 25 060 0.00 5000030 30 60 300 N m 40 220 ft.lb 4 x 8 28 24 609 587 25 20 0.00 5 03
TOSIOMAX 775 Torque Screwdriver with cut-out for controlled tightening in cn m and in.lb. With /4" inside hexagon (F 6.3 DIN 326/ISO 73), with cut-out, for one-off jobs and production runs, disengaging clutch coupling, clockwise and counterclockwise operation, DIN EN ISO 6789, Type II, Category D. 775 Torque screwdriver "TOSIOMAX" The measuring element: The measuring element is a screw compression spring. Adjustment: The level is set steplessly via a rotary micrometer scale. Safe working methods: These clicking torque screwdrivers are equipped with a ratchet which disengages when the preset torque level is reached preventing excessive torque being applied. Guaranteed maximum accuracy deviation ± 6 %. With certificate. A firm grip: The shape of the handle and its surface texture ensure safe and accurate transfer of torque. Insert tools (bits): For all /4" hex E 6.3, Phillips-head screws, POZIDIV/SUPADIV, straight-slot, TOX, hex bits (see pp. 87, 88). For very small joints, bits with a 4 mm hex drive and an adaptor No 35/2 for BITS screwdriver inserts, Type C4, and external hex /4" (E 6.3 DIN 326/ISO 73) are required (see pp. 84, 87). 775/3 775/2 5 775/30 775/50 775/00 inside L size W X b mm g 5060003 3 ) 2 30 cn m 0.2 cn m F 6.3 05 20 0.00 506002 2 2 ) 20 20 cn m cn m F 6.3 57 95 0.00 5060030 30 2 ) 40 300 cn m cn m F 6.3 60 25 0.00 5060050 50 2 ) 00 500 cn m 2.5 cn m F 6.3 205 455 0.00 506000 00 3 ) 200 000 cn m 5 cn m F 6.3 235 770 0.00 5460003 a/3 ) 0.2 3 in.lb 0.02 in.lb F 6.3 05 20 0.00 546002 a/2 2 ) 2 2 in.lb 0. in.lb F 6.3 57 350 0.00 5460050 a/50 2 ) 0 50 in.lb 0.25 in.lb F 6.3 205 606 0.00 ) with a swivelling handle-end to improve tool control; and with a clamping screw for locking the preset. 2 ) with an additional locking mechanism to prevent the selected torque being inadvertently adjusted. 3 ) with screw-on handles for increasing the force applied for large torques. 04
Torque limiter for spark plugs Torque limiters with cut-out measure directly on spark plug, thus ensuring high accuracy even when used with several accessory tools. When the pre-set torque is reached the cut-out operates "Pull-on" is impossible. Pre-set value remains with these tools. Due to the built-in left hand lock, spark plugs can be tightened as well as loosened. Small overall dimensions avoid access problems. Universal Torque Limiter No 7600 is set to required cut-on by means of pin. 7600 Universal torque limiter capacity 5 35 N m, with direct adjustment and left hand lock, with adjustment pin. D a b L W X " " mm mm g 5060035 5 35 N m 5 N m 3 /8 3/8 28 53 236 0.00 with in-built torque trip value if requested (price available on request) ES 7600 for No 7600. Adjustment pin g S 59300 5 0 0.00 7620 Torque limiter with built-in universal joint, cut-out set at 20 N m, left hand lock. D a b L N m " " mm mm g 5070020 20 3/8 3/8 28 03 33 0.00 7/80 MANOSKOP 7 with integrated force compensator Torque wrench, indicating, with carrier for interchangeable shell tools, registered design, use shell adaptor No 7370/80 to make 4 x 8 mm insert tools fit (max. 400 N m), with pointer follower, scale is made of luminescent light yellow special film enabling clear readings even in poor light conditions, dual scale N m/ft.lb. Handle with integrated force compensator. Measuring element is a deflection plate in the handle, with overload cut-out, anticlockwise by turning over. Guaranteed accuracy ± 4 %. With certificate. Insert tools see pages 08-3. 5 K b h L L F S F W W X X mm mm mm mm mm mm g 50030080 60 800 N m 20 600 ft.lb 0 N m 0 ft.lb 24.5 x 28 28 24 048 050 95 2030 0.00 05
7a/80 MANOSKOP 7 with integrated force compensator Indicating torque wrench with a permanent ratchet and pointer follower. Scale is made of luminescent light yellow special film enabling clear readings even in poor light conditions. Twin scales ft.lb/n m. Dial gauge has a protective ring as additional protection against knocks. Not suitable for anticlockwise use. Boxed. Guaranteed accuracy ± 4 %. With certificate. D b h L L F W W X X " mm mm mm mm g 50450080 00 600 ft.lb 60 800 N m 0 ft.lb 0 N m 3/4 70 30 52 060 4280 0.00 73Nm/5 Friction gauge Indicating torque wrench with permanently attached square drive and trailing pointer dial. No needle wobble during measurements. Lightweight construction through use of aluminium. Guaranteed maximum accuracy deviation ± 4 %. With certificate. D b h L L F S F W X " mm mm mm mm mm g 5024005 2 5 N m 0.5 N m /2 72 50 298.5 250 0 676 0.00 TOSIOMETE 760 Indicating Torque Screwdriver with measuring element = torsional leaf spring, for right hand tightening (with pointer follower) and for left hand tightening. 5 760 Torque screwdrivers TOSIOMETE With /4" inside hexagon (F 6.3 DIN 326), with comparison scale in.lb. Guaranteed accuracy ± 4 %. Insert tools: All tools and accessories with hexagon drive shaft E 6.3 ( /4") DIN 326/ISO 73 are safely held in tool carrier. BITS screwdrivers (see page 87, 88). For use with /4"-sockets, please order adaptor No 35 (see page 87). inside L size W W X b mm g 5040007 7.5 5 75 cn m.5 6.5 in.lb 2.5 cn m F 6.3 85 23 0.00 504005 5 30 50 cn m 3 3 in.lb 5 cn m F 6.3 85 435 0.00 5040030 30 60 300 cn m 6 26 in.lb 0 cn m F 6.3 85 23 0.00 5040060 60 20 600 cn m 2 52 in.lb 20 cn m F 6.3 85 440 0.00 Note! Torque tightening tools are measuring instruments. They must be regularly calibrated with suitable instruments and adjusted accordingly (see DIN EN ISO 6789, 5.3 ecalibrating). 06
Electronic angle-controlled torque wrench Sensotork 73 Simple, flexible operation thanks to operator guidance on large-format display. Very broad measuring range (5 % to 00 % of rated value) with display deviation value of ± % of the current reading. Display deviation value of angle is ± %. epeated joint can be collated to form a single menu-guided sequence. (Insert tools see pages 08-3) 73 Electronic angle-controlled torque wrenches Sensotork Üü Electronic angle-controlled torque wrench with insert tool pawl-action ratchet, with Quickelease safety lock, for clockwise and anticlockwise use, readings independent of point of application of force (sizes 6 and 20), units of measurement: N m, ft.lb, in.lb, advance warning points for visual, tactile and acoustic signals, torque and angle are simultaneously visible, convenient angle measurement across a very wide angle range without a reference arm, choice of individual insert lengths, maintenance friendly due to easy adjustment and automatic reminder of next calibration date, individual identification possible, tamper-proof due to password protection, meets requirements of DKD- 3-7, Class 2 and DIN EN ISO 6789, with works certificate in accordance with DIN EN 0204, supplied in sturdy plastic case (size 40 in sturdy steel case). Included are 3 rechargeable cells, AA/L6 AM,.5 V, 800 mah. However, other batteries and cells may also be used: AA/L6,.5 V batteries or AA/L6,.2 V rechargeable cells. D J b h L g size N m ft.lb " mm mm mm mm g with box 9650606 6 3 60 2.5 44 3/8 9 x 2 50 33.5 378 856 500 0.00 9650620 20 0 200 7 48 /2 4 x 8 50 33.5 608 552 2430 0.00 9650640 40 20 400 5 296 3/4 4 x 8 50 33.5 838 2332 5555 0.00 Electronic torque wrench Sensotork 72 72 Electronic torque wrench Sensotork Üü Electronic torque wrench with option of attaching interchangeable insert tools, same design as No 73 but without angle function. 5 D J b h L g size N m ft.lb " mm mm mm mm g with box 9650506 6 3 60 2.5 44 3/8 9 x 2 50 33.5 378 856 500 0.00 9650520 20 0 200 7 48 /2 4 x 8 50 33.5 608 552 2430 0.00 9650540 40 20 400 5 296 3/4 4 x 8 50 33.5 838 2332 5555 0.00 Accessories for electronic angle-controlled torque wrench No 73 and electronic torque wrench No 72 7757+7052 USB cable and software for No 72, 73 for statistical analysis of torque readings and recording series of readings on the PC. L m g 96583622.5 00 0.00 07
7380N/ 7385N Torque angle gauges registered design, for angle controlled bolt/screw tightening, with static read-off point. ead-off possible from any angle thanks to a pair of angled scales. emovable magnet for attaching sockets with /2" internal square drive. For use in conjunction with tightening tools such as Service MANOSKOP No 730N. Since this tightening method requires a predetermined snug torque to be applied, it is essential to choose a torque wrench covering both snug torque as well as maximum torque required to reach the degree of angle recommended. Whether /2" or 3 /4" sq.dr. Torque Angle Gauge is used depends upon the square drive of the appropriate torque wrench employed. 725/B atchet insert tool reversible, with inside hexagon, /4" or 5 /6", DIN 326/ISO 73 D 6.3 or D8 for direct acceptance of bits /4" or 5 /6" outside hexagon C 6.3 (size 4: 22 teeth, size 5: 30 teeth). Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). a D b h L No " " WXmm mm mm g 540000 7380N /2 /2 ± 360 2 78 43 46 494 0.00 5400002 7385N 3 /4 3/4 ± 360 2 78 76 46 720 0.00 Insert/shell tools for torque wrenches inside J b h S size b " mm mm mm mm g 58255004 4 /4 9 x 2 22 4 7.5 54 0.00 58255005 5 5/6 9 x 2 29 4.5 28*7 0.00 * Caution! Modified settings on torque wrench (refer to note on page 20) 725L/5 atchet insert tool reversible, 30 teeth. Caution! Modified settings on torque wrench (refer to note on p. 20). This ratchet insert tool has the same extension length as ring insert tool No 732G/0 (see p. ) and square drive insert tool No 734L/5 (see p. 09). 725Q Quickelease ratchet insert tool 5 Üü reversible, with Quickelease safety lock, size 4: 22 teeth, sizes 5 and 0: 30 teeth, size 20: 36 teeth. D J b h S size " mm mm mm mm g 58253004 4 /4 9 x 2 22 4.5 7.5 60 0.00 58253005 5 3/8 9 x 2 29 4.5 28*30 0.00 5825300 0 /2 9 x 2 29 4.5 28*4 0.00 58253020 20 /2 4 x 8 4 8 38.5*325 0.00 Maximum continuous loads of ratchet insert tools are limited to: 725Q/4-40 N m, 725Q/5 and 725Q/0-00 N m, 725Q/20-250 N m. Limits must not be exceeded when these insert tools are used with torque wrenches of larger capacity. * Caution! Modified settings on torque wrench (refer to note on page 20) D J b h S " mm mm mm mm g 585005 3/8 9 x 2 27.5 4.5 45 64 0.00 725/4 reversible, 22 teeth. atchet insert tool D J b h S " mm mm mm mm g 58254004 /4 9 x 2 22 4.5 7.5 62 0.00 Maximum continuous loads of ratchet insert tools are limited to: 725/4-40 N m. Limits must not be exceeded when these insert tools are used with torque wrenches of larger capacity. 08
735 reversible, 60 teeth. atchet insert tools 734F Square drive insert tools with permanently attached, captive square drive. D J b h S size " mm mm mm mm g 58250005 5 3/8 9 x 2 33 24 7.5 36 0.00 5825000 0 /2 9 x 2 33 24 7.5 47 0.00 58250020 20 /2 4 x 8 43 26.2 25 302 0.00 58250040 40 3/4 4 x 8 50 30.7 25 467 0.00 Maximum continuous loads of ratchet insert tools are limited to: 735/5 and 735/0-00 N m, 735/20-300 N m, 735/40-650 N m. Limits must not be exceeded when these insert tools are used with torque wrenches of larger capacity. D J b h S size " mm mm mm mm g 5824004 4 /4 9 x 2 22 4 7.5 72 0.00 5824005 5 3/8 9 x 2 22 4 7.5 75 0.00 734L/5 Square drive insert tool Caution! Modified settings on torque wrench (refer to note on p. 20). This square-drive insert tool has the same extension length as ring insert tool No 732G/0 (see p. ) and ratchet insert tool No 725L/5 (see p. 08). 735/80 atchet shell tool with push through square drive, registered design, 30 teeth. D J b h S " mm mm mm mm g 58242005 3/8 9 x 2 20 4 45 4 0.00 D K b h S " mm mm mm mm g 58250080 3/4 24.5 x 28 76 43 95 2000 0.00 734 Square drive insert tools D J b h S size " mm mm mm mm g 58240004 4 /4 9 x 2 20 4 7.5 7 0.00 58240005 5 3/8 9 x 2 20 4 7.5 76 0.00 5824000 0 /2 9 x 2 20 4 7.5 82 0.00 58240020 20 /2 4 x 8 27 8 25 203 0.00 58240040 40 3/4 4 x 8 40 25 25 396 0.00 Caution: Maximum continuous loads of square drive insert tools are limited to: 734/4-40 N m, 734/5-80 N m, 734/0-00 N m, 734/20-300 N m, 734/40-650 N m. Limits must not be exceeded when these insert tools are used with torque wrenches of larger capacity. 5 734/80 registered design. Square drive shell tool D K b h S " mm mm mm mm g 58240080 3/4 24.5 x 28 42 42 95 200 0.00 09
73 J 9x2mm Open ended insert tools A b h S size mm mm mm mm g 582007 0 7 22 5 7.5 40 0.00 582008 8 22 5 7.5 39 0.00 582009 9 26 5.5 7.5 38 0.00 58200 0 26 5.5 7.5 42 0.00 5820 26 5.5 7.5 4 0.00 58202 2 ) 30 7 7.5 43 0.00 58203 3 30 7 7.5 48 0.00 58204 4 35 8 7.5 52 0.00 58205 5 35 8 7.5 5 0.00 58206 6 38 8.5 7.5 58 0.00 58207 7 38 8.5 7.5 60 0.00 58208 8 42 9 20*7 0.00 58209 9 42 9 20*74 0.00 ) For flare nuts of hydraulic pipes on French vehicles J 4 x 8 mm. A b h S size " mm mm mm g 5864028 a/40 7/6 30 7 25 27 0.00 5864032 /2 30 7 25 25 0.00 5864034 9/6 35 8 25 29 0.00 5864036 5/8 38 9 25 36 0.00 5864038 /6 42 0 25 48 0.00 5864040 3/4 42 0 25 44 0.00 5864042 3/6 50 25 7 0.00 5864044 7/8 50 25 65 0.00 5864046 5/6 53 2 25 77 0.00 5864048 60 3 30*224 0.00 5864052 /8 66 4 30*258 0.00 * Caution! Modified settings on torque wrench (refer to note on page 20). 73 registered design. K 24.5 x 28 mm Open ended shell tools 5 J 9x2mm A b h S size " mm mm mm g 58606 a/0 /4 22 5 7.5 36 0.00 586020 5/6 22 5 7.5 53 0.00 586024 3/8 26 5.5 7.5 38 0.00 586028 7/6 26 5.5 7.5 37 0.00 586032 /2 30 7 7.5 44 0.00 586034 9/6 35 8 7.5 49 0.00 586036 5/8 38 8.5 7.5 64 0.00 586038 /6 42 9 20*76 0.00 586040 3/4 42 9 20*73 0.00 J 4 x 8 mm A b h S size mm mm mm mm g 582403 40 3 30 7 25 28 0.00 582404 4 35 8 25 29 0.00 582405 5 35 8 25 32 0.00 582406 6 38 9 25 40 0.00 582407 7 38 9 25 36 0.00 582408 8 42 0 25 47 0.00 582409 9 42 0 25 47 0.00 582402 2 50 25 7 0.00 5824022 22 50 25 65 0.00 5824024 24 53 2 25 67 0.00 5824025 25 53 2 25 70 0.00 5824027 27 60 3 30*29 0.00 5824030 30 66 4 30*245 0.00 5824032 32 66 4 32.5*246 0.00 5824034 34 66 4 32.5*239 0.00 5824036 36 74 5 32.5*275 0.00 5824038 38 74 5 32.5*265 0.00 582404 4 82 5 36.5*307 0.00 * Caution! Modified settings on torque wrench (refer to note on page 20). A b h S size mm mm mm mm g 5828024 80 24 50 3 95 60 0.00 5828027 27 56 4 95 620 0.00 5828030 30 63 5 95 655 0.00 5828032 32 67 5 95 670 0.00 5828034 34 72 5 95 699 0.00 5828036 36 74 5 95 740 0.00 582804 4 84 6 95 80 0.00 5828046 46 94 7 95 867 0.00 5828050 50 04 8 95 00 0.00 5828055 55 4 9 95 50 0.00 5828060 60 24 20 95 330 0.00 732 P J 9x2mm ing insert tools A b h S size mm mm mm mm g 5822007 0 7 3 8 7.5 37 0.00 5822008 8 4.2 8 7.5 40 0.00 582200 0 7.2 9 7.5 44 0.00 58220 8.5 9 7.5 4 0.00 582202 2 20.5 7.5 49 0.00 582203 3 2.5 7.5 56 0.00 582204 4 22.5 7.5 52 0.00 582205 5 24.5 2 7.5 52 0.00 582206 6 26 2 7.5 54 0.00 582207 7 27 3 7.5 59 0.00 582208 8 28 3 7.5 56 0.00 582209 9 30.5 3 7.5 65 0.00 582202 2 33 5 7.5 7 0.00 5822022 22 34.5 5 7.5 74 0.00 0
J 9x2mm A b h S size " mm mm mm g 586206 a/0 /4 3 8 7.5 36 0.00 5862020 5/6 4.2 8 7.5 37 0.00 5862024 3/8 ) 7.2 9 7.5 37 0.00 5862028 7/6 8.5 9 7.5 40 0.00 5862032 /2 2.5 7.5 53 0.00 5862034 9/6 22.5 7.5 52 0.00 5862036 5/8 26 2 7.5 54 0.00 5862038 /6 28 3 7.5 58 0.00 5862040 3/4 30.5 3 7.5 58 0.00 5862042 3/6 33 5 7.5 68 0.00 5862044 7/8 34.5 5 7.5 69 0.00 ) For Volvo aero-engines, types "JAS" J 4 x 8 mm A b h S size mm mm mm mm g 5822403 40 3 22.5 25 30 0.00 5822404 4 23 25 23 0.00 5822405 5 24 25 28 0.00 5822406 6 25.5 2 25 33 0.00 5822407 7 27 2 25 35 0.00 5822408 8 29 3 25 34 0.00 5822409 9 30.5 3 25 38 0.00 5822402 2 33 5 25 44 0.00 58224022 22 34.5 5 25 45 0.00 58224024 24 37.5 5 25 53 0.00 58224027 27 42.5 7 25 62 0.00 58224028 28 45.5 9 25 75 0.00 58224030 30 46 9 25 82 0.00 58224032 32 47.5 9 25 8 0.00 58224034 34 52 9 28*20 0.00 58224036 36 54 9 28*203 0.00 5822404 4 60 20 30*240 0.00 * Caution! Modified settings on torque wrench (refer to note on page 20). J 4 x 8 mm A b h S size " mm mm mm g 58624032 a/40 /2 22.5 25 22 0.00 58624034 9/6 23 25 22 0.00 58624036 5/8 25.5 2 25 34 0.00 58624038 /6 29 3 25 32 0.00 58624040 3/4 30.5 3 25 38 0.00 58624042 3/6 33 5 25 42 0.00 58624044 7/8 34.5 5 25 47 0.00 58624046 5/6 37.5 5 25 5 0.00 58624048 4 7 25 60 0.00 732 ing insert tools P Q J 9x2mm Caution! Modified settings on torque wrench (refer to note on page 20). HPQ high performance steel. ing end is chrome plated, square drive is gunmetal finish. A b h S size " mm mm mm g 58626 al/0 /4 0.2 5.2 50 42 0.00 586220 5/6.8 6.4 50 43 0.00 586224 3/8 4.6 7 50 46 0.00 586228 7/6 6.7 8 50 48 0.00 586232 /2 8.5 8.7 50 42 0.00 586234 9/6 20.7 9.5 50 60 0.00 586236 5/8 22.6 0.5 50 62 0.00 For assembling and dismantling aero-engines. 732 ing insert tools P Q J 9x2mm Caution! Modified settings on torque wrench (refer to note on p. 20). This insert tool has the same extension length as insert tool No 725L/5 (see p. 08) and square-drive insert tool No 734L/5 (see p. 09) A b h S size mm mm mm mm g 58620007 G/0 7.5 6 45 3 0.00 58620008 8 2.4 6 45 33 0.00 58620009 9 4 8 45 40 0.00 5862000 0 5.6 8 45 44 0.00 5862003 3 9.3 9.2 45 60 0.00 A b h S size " mm mm mm g 586226 ag/0 /4 0.4 6 45 28 0.00 5862220 5/6 2.4 6 45 3 0.00 5862224 3/8 4.9 8 45 42 0.00 5862228 7/6 7 8 45 43 0.00 5862232 /2 9 9.2 45 58 0.00 5862234 9/6 2 9.2 45 58 0.00 5862236 5/8 23 2 45 74 0.00 for assembling and dismantling aero-engines. Tool holder with tool carrier to receive insert tools (without torque function). 5 J L No mm mm g 820000 820 9 x 2 382.5 490 0.00 82000 82 4 x 8 575 720 0.00
732 P registered design K 24.5 x 28 mm ing insert tools 733 P J 9x2mm Open ring insert tools 5 A b h S size mm mm mm mm g 58228024 80 24 36 5 95 605 0.00 58228027 27 40.5 5 95 60 0.00 58228030 30 46 6 95 630 0.00 58228032 32 49 6 95 635 0.00 58228034 34 52 7 95 650 0.00 58228036 36 54 7 95 650 0.00 5822804 4 6 8 95 675 0.00 58228046 46 66 9 95 720 0.00 58228050 50 75 20 95 803 0.00 58228055 55 84 2 95 889 0.00 58228060 60 93 22 95 995 0.00 A b h S size " mm mm mm g 58628046 a/80 5/6 ) 36 4 95 604 0.00 58628050 /6 ) 40.5 4 95 608 0.00 ) for jet engine pins (Airbus A320/A32) 732TX J 9x2mm TOX insert tools b h S size size mm mm mm g 5829006 0 E6 3 8 7.5 40 0.00 5829008 E8 4.2 8 7.5 45 0.00 582900 E0 7.2 9 7.5 45 0.00 582902 E2 8.5 9 7.5 50 0.00 582904 E4 2.5 7.5 60 0.00 J 4 x 8 mm b h S size size mm mm mm g 5829404 40 E4 22.5 25 30 0.00 5829408 E8 24 25 35 0.00 58294020 E20 29 3 25 50 0.00 58294024 E24 30.5 3 25 50 0.00 A b h W S size mm mm mm mm mm g 582300 0 0 2.5 7. 7.5 57 0.00 58230 22.5 8.6 7.5 55 0.00 582302 2 24.5 2 9 7.5 59 0.00 582303 3 26 2 0 7.5 55 0.00 582304 4 27 3 7.5 60 0.00 582306 6 30.5 3 3 7.5 65 0.00 582307 7 3.5 3 4 7.5 64 0.00 582308 8 33 5 4.8 7.5 74 0.00 582309 9 34 5 5.8 7.5 80 0.00 582302 2 38.5 5 6.2 20*88 0.00 5823022 22 39.5 5 7 20*92 0.00 5823024 24 40 5 8 20*75 0.00 * Caution! Modified settings on torque wrench (refer to note on page 20). A b h W S size " mm mm mm mm g 5863024 a/0 3/8 2.5 7. 7.5 55 0.00 5863028 7/6 22.5 8.6 7.5 56 0.00 5863032 /2 26 2 9.5 7.5 58 0.00 5863034 9/6 27.5 3 7.5 59 0.00 5863036 5/8 30.5 3 2.7 7.5 6 0.00 5863038 /6 33 5 4 7.5 48 0.00 5863040 3/4 34 5 5.8 7.5 76 0.00 736 737 BIT holder insert tools Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 326/ISO 73). inside J b h S size b " mm mm mm mm g 582600 0 D 8 5/6 9 x 2 6 2.5 7.5 47 0.00 5826260 0- D 6.3 /4 9 x 2 4 0 7.5 45 0.00 5826040 40 D 8 5/6 4 x 8 6 2.5 25 2 0.00 inside b DIN 326/ISO 73 Blank end insert tools gun finish. To prevent damage from excessive temperatures, the locking pin, spring and washer are not fitted until the welding work has been completed. Instructions are supplied. 2 Welding surface J H L size h x b mm mm mm mm g 5827000 0 8 x 4 9 x 2 4.5 8 35 0.00 58270040 40 x25 4x8 2.5 2 98 0.00
7370/0 Üü Adaptor for using insert tools with an outer square drive of 4 x 8 mm on torque wrenches with an internal square drive of 9 x 2 mm. Caution! Modified settings on torque wrench (refer to note on p. 20). 7370/40- Adaptor for using shell tools with an internal square drive of 24.5 x 28 mm on torque wrenches with an internal square drive of 4 x 8 mm. Long-term loading of the adaptor is restricted to 650 N m. Caution! Modified settings on torque wrench (refer to note on p. 20). D a b h S mm mm mm mm mm g 5829000 9 x 2 4 x 8 3 26 30.5 4 0.00 7370/40 Üü Adaptor for using insert tools with an outer square drive of 9 x 2 mm on torque wrenches with an internal square drive of 4 x 8 mm. Long-term loading of the adaptor is restricted to 00 N m. Caution! Modified settings on torque wrench (refer to note on p. 20). D D b h mm mm mm mm g 5829004 4 x 8 24.5 x 28 28 24 25 0.00 7370/80 Shell adaptor registered design, for attaching 4 x 8 mm insert tools. Load capacity up to 650 N m. Caution! Modified settings on torque wrench (refer to note on p. 20). D a b h S mm mm mm mm mm g 58290040 4 x 8 9 x 2 28 2 2.5 5 0.00 a a b h S mm mm mm mm mm g 58290080 24.5x28 4x8 36 26 70 28 0.00 7370/0-2 Adaptor for use with insert tools with a lateral dovetail profile in torque wrenches with 9 x 2 mm internal square drives. Caution! Modified settings on torque wrench (refer to note on p. 20). 5 D b h S mm mm mm mm g 5829002 9 x 2 23.5 9.5 24 50 0.00 7370/40-2 Adaptor for use with insert tools with a lateral dovetail profile in torque wrenches with 4 x 8 mm internal square drives. Long-term loading of the adaptor is restricted to 200 N m. Caution! Modified settings on torque wrench (refer to note on p. 20). D b h S mm mm mm mm g 58290042 4 x 8 3.5 9.5 34.6 36 0.00 3
Electronic torque tester for torque wrenches Sensotork 7707 W For complete calibration systems, see p. 95. Compact workshop-based torque tester for easy adaptation by replacement of the transducers. High degree of accuracy (from 20 00 % of the rated value ± 0.25 % display deviation from actual measured value, up to 20 % of rated value ± %) thanks to flat transducer and conversion and digitalisation of readings within the transducer. High degree of safety through display showing actual torque read-off where clicking torque wrenches are used. 7707 W Workshop torque tester Sensotork Üü Electronic workshop torque tester for torque wrenches, consisting of: transducer (registered design) holder display unit (registered design) tripod for display unit (with.5 m cable) spiral cable mains adaptor (230 V) or direct connection to 2 V in-car supply is possible square drive adaptor (No 7707-2W, No 7707-3W) kit for attaching the unit to a workbench or wall in a horizontal or vertical testing position for clockwise and anticlockwise use. Units of measurement: N m, ft.lb, in.lb. The easily interchangeable transducers are attached to the holder by means of a Quickelease safety lock. Low lateral forces thanks to low-profile transducers, automatic detection of the transducer, flexible and user friendly because the unit can be used horizontally or vertically and the display unit can be placed in many positions, additional tripod with.5 m cable for mounting the display unit to facilitate visual monitoring when using longer torque wrenches, especially broad measuring range from 2% to 00% of rated value ( < % at 00 N m). eadings can be transferred to PC via the USB cable (no separate power supply needed, power comes from PC). While individual transducers are being recalibrated, the torque tester itself remains on-site for further use. Wide range of application (-20 C to +60 C). Meets DIN 5309, Class 2. With certificate. Supplied in sturdy plastic case. 5 t Capacity Capacity Capacity a b h h 2 t g No N m ft.lb in.lb " mm mm mm mm g with box 965207 7707-W 0.2 0 0.5 7.4.8 88.5 /4 80 79 25 80 6255 8255 0.00 9652072 7707-2W ) 2 00.5 74 7.7 885 3/8 80 79 25 80 7025 0000 0.00 9652073 7707-3W 2 ) 0 00 7.4 8.5 88.5 9736 3/4 80 79 25 80 7495 060 0.00 ) with square drive adaptor No 409M ( /4" a x 3 /8" D) 2 ) with square drive adaptors No 7787 ( /4" a x 3 /4" D), No 7788 ( 3 /8" a x 3 /4" D), No 7789 ( /2" a x 3 /4" D) 4
Accessories for workshop torque tester 772 7724 Üü Transducers registered design, high degree of accuracy thanks to conversion and digitalisation of readings within the transducer itself. Not susceptible to lateral forces due to lowprofile construction. Within the range of 20 00 % of rated value ± 0.25 % display deviation value from actual torque reading, up to 20 % of rated value, ± %. Can also be used as part of a calibration system (see p. 95). Capacity Capacity Capacity a No N m ft.lb in.lb " g 520002 772 0.2 0 0.5 7.4.8 88.5 /4 735 0.00 5200022 7722 2 00.5 74 7.7 885 3/8 2486 0.00 5200023 7723 0 00 7.4 8.5 88.5 9736 3/4 300 0.00 5200024 7724* 300 3000 22.4 224 2655.3 26553 /2 0500 0.00 * for use with mechanical loader No 7792 (see p. 8) 7750 Display unit registered design, for displaying the actual torque as measured. Units of measurement: N m, ft.lb, in.lb. Modes of operation: track, peak hold, first peak (only with manual operation), additional display of actual torque applied with clicking torque wrenches. Swivels to any desired position thanks to universal ball-joint. 7753 For connecting up to 5 transducers to the PC for evaluating your data USB adaptor with USB cable L b h mm mm mm g 520053 25 65 4 230 0.00 7752 Spiral cable Connection between transducer and display unit or USB adaptor with jacks at both ends, 90 angled. L max. mm g 520052 500 35 0.00 7755 Input: 230 V AC (No 7755/) 0 V AC (No 7755/2) Output: 2 V DC Mains adaptor g 5200050 325 0.00 7757+773 Connection between transducer and PC, for evaluating data on the PC. USB cable and software No Volt g 520054 7755/ 230 385 0.00 520055 7755/2 0 357 0.00 409M /4" socket x 3 /8" plug (6.3 x 0 mm). Square drive adaptor 5 L m g 96583623.5 20 0.00 775 Jack cable Connection between transducer and USB adaptor or display unit. L O mm mm g S 03000 3 25 4 0.00 7787 /4" socket x 3 /4" plug (6.3 x 20 mm). Square drive adaptor L m g 52005.5 50 0.00 L O mm mm g 5852087 5.5 29 4 0.00 5
7788 3/8" socket x 3 /4" plug (0 x 20 mm). Square drive adaptor 7789-2 Square drive adaptor 3/4" socket x /2" plug (20 x 40 mm). L O mm mm g 5852088 23.5 29 52 0.00 7789 /2" socket x 3 /4" plug (2.5 x 20 mm). Square drive adaptor L O mm mm g 58523089 44 60 380 0.00 7789-3 " socket x /2" plug (25 x 40 mm). Square drive adaptor L O mm mm g 5852089 23.5 29 42 0.00 L O mm mm g 58524089 44 60 290 0.00 5 6
Mechanical loaders for torque wrenches and torque screwdrivers Thanks to the modular design, end users can put together their own mechanical loader according to their specific requirements. Extensions with additional components are possible any time. All the components are carefully matched to ensure compatibility and can be easily fitted. This slot-in system is easy to use and has a very accurate fit. The components can be quickly and easily locked together using the integrated screw joints. The display unit can be attached at various points of the system via a holder. In this way, every user can organise his or her work to suit themselves. Mechanical loader for torque wrenches up to 00 N m nominal torque 779 Mechanical base unit from 0.2 to 400 N m, registered design Measurement possible without moving the point of application of force. Thanks to a specially designed force transmission system, mechanical loader No 779 avoids the need for the point of force application to be shifted during the calibration process. The lever below the test rail is actuated in a linear direction by the handwheel acting on a spindle. The linear motion is translated into a rotary movement which acts on the transducer. The torque wrench to be calibrated remains in the same position throughout the calibration process. This prevents measuring errors caused by the point of force application being moved. Thanks to a low-friction linear ball bearing, the torque wrench is automatically levelled as it is placed in the unit. This reduces the error potential caused by possible lateral forces being inadvertently applied to the transducer. Supplied without torque wrench, transducer, display unit and holder 779 779-2 779 Capacity for transducer for torque wrenches with Profile width b h L N m No functional length (L F ) max. mm mm mm mm mm kg 52009 0.2 400 772; 7722; 7723 85 80 704 323 087 40.5 0.00 779- Extension unit for No 779 up to 00 N m 5 779-2 779 779-779- Capacity for torque wrenches with Profile width b h L N m functional length (L F ) max. mm mm mm mm mm kg 5209 00 390 (779 + 779-) 80 308 35 673 5.5 0.00 7
Mechanical loader for torque wrenches up to 3000 N m nominal torque 7792 Mechanical base unit from 0 to 00 N m, registered design Capacity for transducer for torque wrenches with Profile width b h L N m No functional length (L F ) max. mm mm mm mm mm kg 520092 0 00 7723; 7724 390 270 722 323 668.5 75 0.00 7792- Extension unit for No 7792 up to 3000 N m Capacity for torque wrenches with Profile width b h L N m functional length (L F ) max. mm mm mm mm mm kg 52092 3000 2390 (7792 + 7792-) 270 558 35 073 8.5 0.00 Test attachments for torque screwdrivers 779-2 Can be bolted onto mechanical loader No 779. The torque screwdriver to be calibrated is inserted in the square mount of the transducer and fixed using the universal central clamp. The handwheel ensures that the required force is applied in a controlled manner to the torque screwdriver. Test attachment for torque screwdriver 7790 Stand alone test attachment for torque screwdrivers Can be bolted to mechanical loader No 7792. The torque screwdriver to be calibrated is inserted in the square mount of the transducer and fixed using the universal central clamp. The handwheel ensures that the required force is applied in a controlled manner to the torque screwdriver. Supplied without transducer or torque screwdriver. Capacity b h t N m mm mm mm kg 52029 0 250 442 593 35 5.5 0.00 Capacity for transducer b h t N m No mm mm mm kg 5852090 0 772 250 442 593 35 8.5 0.00 5 Accessory 7750- Holder for display unit No 7750. Can be bolted to mechanical loaders and test attachments. g 520050 5 0.00 8
MULTIPOWE Makes childs play of the largest torques. Multipower or really "tough work". STAHLWILLE Multipower torque multipliers with planetary gears take the fatigue out of tightening or loosening stiff or large bolt connections. A long lever is not necessary. STAHLWILLE Multipower multiplies human strength; steady torque transfer is easy on nuts and bolts. Even the largest torques are transferred with ease and precision over long periods (guaranteed limit ± 5%). Accordingly, construction materials and workmanship are extremely robust. When combined with STAHLWILLE torque wrenches, Multipower really shows its strength. The Multipower range extends to 5000 N m/3687 ft.lb. Multipower tools are also available on request up to 2000 N m/8850 ft.lb. The largest Multipower units are fitted with an anti-backlash device. MULTIPOWE with overload protection and planetary gears, in carrying case, with spare hex. for overload device, guaranteed accuracy ± 5 %. STW 393N STW 290N Gear Torque a D b h L No N m ) ft.lb ) N m 2 ) ft.lb 2 ) ratio ratio " " mm mm mm g 53032900 STW 290N 800 590 229 69 4 : : 3.5 /2 3/4 66 84 25 5355 0.00 53032950 STW 295N 350 996 386 285 4 : : 3.5 3/4 3/4 84 00 265 7020 0.00 5303390 STW 39N*) 2000 475 67 23 6 : : 2 /2 89 40 330 9065 0.00 53033920 STW 392N*) 3000 222 250 84 6 : : 2 3/4 89 50 330 0200 0.00 53033930 STW 393N*) 5000 3687 32 230 20 : : 6 3/4 /2 4 82 400 2890 0.00 *) with anti-backlash device ) max. output 2 ) max. input 5 Spares for Multipower Sun wheel with overload cutout eplacement square drives drilled, for STAHLWILLE-Multipower STW 390 STW 393 (until 996). for No g 59300039 STW 290N 4 0.00 59300067 STW 295N 95 0.00 59300068 STW 39N 95 0.00 59300069 STW 392N 05 0.00 59300070 STW 393N 05 0.00 No g 593039 STW 39-700* 89 0.00 5930392 STW 392-70 232 0.00 5930393 STW 393-70 252 0.00 * also for STW 390 9
atchet spare parts sets for torque wrenches 72/5 80 No Content g 599005 720/5 For ratchet/torque wrench No 72/5 Pinion, Pawl, switch-over button and pin, Ball, 2 Compression Springs, 2 Screws 53 0.00 9040000 520 + 720/5 For ratchet/torque wrench No 72/5 Pinion, Pawl, Lever, Lever Pin, Ball, 2 Compression Springs, 2 Screws 27 0.00 599030 720/30 For ratchet/torque wrench No 72/30 Pinion, Pawl, Lever, Lever Pin, Ball, 2 Compression Springs, 2 Screws 34 0.00 599080 720/80 For ratchet/torque wrench No 72Nf/80, 72Nf/00, 735/80 Pinion, 2 Pawls, 2 spring contact points, 2 Compression Springs 448 0.00 Sets of spare parts for ratchet insert tools No 725Q, No 735 450 Q Üü Spare parts set Content: Pinion, Pawl, Lever with pin, Ball, 2 Compression Springs, 2 Screws M.7 x 8 for No g S 900020 725Q/4 5 0.00 4350 Q Üü Spare parts set Content: Pinion, Pawl, Lever with pin, Ball, 2 Compression Springs, 2 Screws for No g S 9020020 725Q/5 5 0.00 7250 Q/0 Üü Spare parts set Content: Pinion, Pawl, Lever with pin, Ball, 2 Compression Springs, 2 Screws for No g S 904020 725Q/0 64 0.00 520 Q Üü Spare parts set Content: Pinion, Pawl, Lever with pin, Ball, 2 Compression Springs, 2 Screws for No g S 9040020 725Q/20 27 0.00 7350/5 Set of spare parts Content: Pinion, Pawl, Switching disk, Spring, 3 Screws for No g S 5925005 735/5 85 0.00 for ratchets from 2/97 7350/0 Set of spare parts Content: Pinion, Pawl, Switching disk, Spring, 3 Screws for No g S 592500 735/0 96 0.00 for ratchets from 2/97 7350/20 Set of spare parts Content: Pinion, Pawl, Switching disk, Spring, 3 Screws for No g S 5925020 735/20 46 0.00 for ratchets from 4/96 7350/40 Set of spare parts Content: Pinion, Pawl, Switching disk, Spring, 3 Screws for No g S 5925040 735/40 29 0.00 for ratchets from 5/97 70V Square drive units for torque wrenches and insert tools. a b L size for No " " mm g S 590000 7...V/ /4 /4 7.5 5 5 0.00 590004 734/4 3/8 /4 22 2 5 0.00 5900003 3 734/5 3/8 3/8 25.8 7 5 0.00 5900005 5 734/0 3/8 /2 30 28 5 0.00 59000 502 /2 720/30; 734/20 /2 /2 33.5 39 5 0.00 5900007 7 72/30 /2 /2 44.3 52 5 0.00 5900008 8 734/40 3/4 3/4 52.2 38 5 0.00 590005 2 720Nf/80; 72Nf/80+00 3/4 3/4 65 79 0.00 2 5
Combination Pliers 650 Combination pliers DIN ISO 5746, precision cutter for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HC, for long life. 6504 60 6505 60 6506 60 L mm Head Handles e r t z g 6504 60 60 chrome plated chrome plated, chequered.8.5 0 6 50 0.00 6504 80 80 2.8 2 6 9 0.00 6504 200 200 2.5 2 3 6 254 0.00 6505 60 60 chrome plated multi-component handles with softer layers.8.5 0 6 20 0.00 6505 80 80 2.8 2 6 250 0.00 6505 200 200 2.5 2 3 6 368 0.00 6506 60 60 polished dip-coated with sure-grip surface.8.5 0 6 63 0.00 6506 80 80 2.8 2 6 90 0.00 6506 200 200 2.5 2 3 6 263 0.00 e cutting capacity in mm for hard wire r cutting capacity in mm for piano wire t cutting capacity in mm for cable z cutting capacity in mm 2 for cable Flat Nose Pliers 6508 Flat nose pliers, long DIN ISO 5745, long, flat serrated jaws. 65085 60 65086 60 L L 3 W D h b mm Head Handles mm mm mm mm mm g 65085 60 60 chrome plated multi-component handles with softer layers 50 5 8 3 5 60 0.00 65086 60 60 polished dip-coated with sure-grip surface 50 5 8 3 5 3 0.00 6 6509 Flat nose pliers, long, with cutter designed for gripping and manipulating electronic components, long, thin, flat serrated jaws, induction hardened cutting edges, approx. 60 HC, for soft and hard wires. L L 3 W D h b mm Head Handles mm mm mm mm mm g 65095 40 40 chrome plated multi-component handles with softer layers 4 4 7.5 2.5 4 50 0.00 26
650 Mechanics flat nose pliers designed for use in fine mechanical and electronics industries, flat, slim, long serrated jaws, box joint, for long life, serrated gripping areas. 6505 45 L L 3 W D h b mm Head Handles mm mm mm mm mm g 6505 45 45 chrome plated dip-coated with sure-grip surface 39.5 7.5 2 4.5 80 0.00 6505 70 70 64 3.5 8 2 4.5 22 0.00 6505 90 90 75 3.5 8.5 2 4.5 28 0.00 656 Mechanics flat nose pliers designed for use by instrument mechanics, flat blunt, serrated jaws, wear resistant. L L 3 W D h b mm Head Handles mm mm mm mm mm g 6565 200 200 chrome plated dip-coated with sure-grip surface 40 3.5 9.5 2.5 9.5 58 0.00 65 elay pliers DIN 5235, Form A, flat pointed, for use on contact and relay springs and on small components, smooth jaws. L L 3 W D h b mm Head Handles mm mm mm mm mm g 655 35 40 chrome plated dip-coated with sure-grip surface 33 3 7.5.5 75 0.00 652 elay pliers DIN 5235, Form B, flat blunt, for use on contact and relay springs and on small components, smooth jaws. 6 L L 3 W D h b mm Head Handles mm mm mm mm mm g 6525 35 40 chrome plated dip-coated with sure-grip surface 33 3 7.5 3.5 8 0.00 27
653 elay pliers DIN 5235, Form C, flat bent, 45 in line with jaws, for use on contact and relay springs and on small components, smooth jaws. L L 3 W D h b mm Head Handles mm mm mm mm mm g 6535 35 40 chrome plated dip-coated with sure-grip surface 3 3 7.5 3.5 80 0.00 654 elay pliers DIN 5235, Form E, flat bent, 90 angle to jaws, for use on contact and relay springs and on small components, smooth jaws. L L 3 W D h b mm Head Handles mm mm mm mm mm g 6545 35 40 chrome plated dip-coated with sure-grip surface 33 3 7.5 4 75 0.00 655 elay pliers DIN 5235, Form D, flat bent, 75 angle to jaws, for use on contact and relay springs and on small components, smooth jaws. L L 3 W D h b mm Head Handles mm mm mm mm mm g 6555 35 40 chrome plated dip-coated with sure-grip surface 33 3 7.5 4 75 0.00 658 Mechanics gripping pliers Form A, flat blunt, designed for use by instrument mechanics, wide precision jaws, smooth, tapering to.5 mm, box joint for precise movement. 6 L L 3 W D h b mm Head Handles mm mm mm mm mm g 6585 30 30 chrome plated dip-coated with sure-grip surface 24.5 7 2 6.5 75 0.00 28
659 Mechanics gripping pliers Form B, flat pointed, designed for use by instrument mechanics, flat pointed precision jaws, smooth, tapering to.5 mm, box joint for precise movement. L L 3 W D h b mm Head Handles mm mm mm mm mm g 6595 30 30 chrome plated dip-coated with sure-grip surface 24.5 7.5 2 75 0.00 ound Nose Pliers 6523 ound nose pliers, short DIN ISO 5745, for bending wire loops and rings, short, round, ground jaws, fine serrations on gripping areas. L L 3 W D b mm Head Handles mm mm mm mm g 65235 60 60 chrome plated multi-component handles with softer layers 30 8 0 3 85 0.00 6524 ound nose pliers, long DIN ISO 5745, for bending wire loops and rings, long, round, ground jaws, fine serrations on gripping areas. L L 3 W D b mm Head Handles mm mm mm mm g 65245 60 60 chrome plated multi-component handles with softer layers 47 5.5 8.5 2.5 55 0.00 6525 Mechanics round nose pliers for bending wire loops, round precision jaws, smooth,.0 point diameter, box joint for precise movement. 6 L L 3 W D b mm Head Handles mm mm mm mm g 65255 30 30 chrome plated dip-coated with sure-grip surface 22.5 7 70 0.00 29
Snipe Nose Pliers 6529 Snipe nose pliers with cutter (radio- or telephone pliers) DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HC. 65294 60 65295 60 L L 3 W D h b mm Head Handles mm mm mm mm mm g 65294 60 60 chrome plated chrome plated, chequered 5 6 9 3 2.5 6 0.00 65294 200 200 73 7 9 3 2.5 60 0.00 65295 60 60 chrome plated multi-component handles with softer layers 5 6 9 3 2.5 70 0.00 65295 200 200 73 7 9 3 2.5 220 0.00 65296 60 60 polished dip-coated with sure-grip surface 5 6 9 3 2.5 48 0.00 65296 200 200 73 7 9 3 2.5 87 0.00 6530 65296 60 Snipe nose pliers with cutter (adio- or Telephone Pliers) DIN ISO 5745, Form B, bent 45, half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HC. 65304 200 65305 200 65306 200 6 L L 2 L 3 W D h b mm Head Handles mm mm mm mm mm mm g 65304 60 60 chrome plated chrome plated, chequered 24 55 6 9 3 2.5 6 0.00 65304 200 200 28 76 7 9 3.5 3 63 0.00 65305 60 60 chrome plated multi-component handles with softer layers 24 55 6 9 3 2.5 70 0.00 65305 200 200 28 76 7 9 3.5 3 220 0.00 65306 60 60 polished dip-coated with sure-grip surface 24 55 6 9 3 2.5 46 0.00 65306 200 200 28 76 7 9 3.5 3 78 0.00 653 Mechanics snipe nose pliers Form A (straight), designed for use on miniature electronic and mechanical components, haft round extra thin, long tapering jaws with fine serration, box joint for precise movement. 6535 70 L L 3 W D h b mm Head Handles mm mm mm mm mm g 6535 70 70 chrome plated dip-coated with sure-grip surface 63 3.5 8 2.5 2 00 0.00 6535 90 90 75 4 8.5 2.5 2 22 0.00 30
6532 Mechanics snipe nose pliers Form B, bent 45, designed for use on miniature electronic and mechanical components, half round extra thin, long tapering jaws with fine serrations, box joint for precise movement. 65325 70 L L 2 L 3 W D h b mm Head Handles mm mm mm mm mm mm g 65325 70 70 chrome plated dip-coated with sure-grip surface 24 54 3.5 8 2.5 2 02 0.00 65325 90 90 28 70 4 8 2.5 2 22 0.00 6533 half round, long tapering, serrated jaws. Mechanics snipe nose pliers L L 3 W D h b mm Head Handles mm mm mm mm mm g 65335 60 60 chrome plated dip-coated with sure-grip surface 50 5 8 3 2.5 29 0.00 6534 Mechanics snipe nose pliers Form A (straight), half round, long tapering, serrated jaws. 65345 200 65345 280 L L 3 W D h b mm Head Handles mm mm mm mm mm g 65345 200 200 chrome plated multi-component handles with softer layers 76 6 0 3 2.5 220 0.00 65345 280 280 chrome plated dip-coated with sure-grip surface 73 20 9.5 3 2.5 255 0.00 6535 Mechanics snipe nose pliers Form B (bent 45 ), half round, long tapering, serrated jaws. 65355 200 65355 280 6 L L 2 L 3 W D h b mm Head Handles mm mm mm mm mm mm g 65355 200 200 chrome plated multi-component handles with softer layers 28 68 7 9.5 3.5 3 220 0.00 65355 280 280 chrome plated dip-coated with sure-grip surface 28 66 20 9.5 3 2.5 255 0.00 3
6538 Mechanics snipe nose pliers designed for use on miniature mechanical components half round tapering jaws, wear resisting serration. L L 3 W D h b mm Head Handles mm mm mm mm mm g 65385 200 200 chrome plated dip-coated with sure-grip surface 38 3 9.5 2.5 2 57 0.00 6536 Snipe nose pliers (needle pliers) DIN ISO 9655, Form A (straight), designed for use on electronic components, half round, extra long tapering jaws, fine serration. L L 3 W D h b mm Head Handles mm mm mm mm mm g 65365 60 60 chrome plated dip-coated with sure-grip surface 58 5 8.5 3 0 0.00 6537 Snipe nose pliers (needle pliers) Form B, bent 45, designed for use on electronic components, half round, extra long tapering jaws, fine serration. L L 2 L 3 W D h b mm Head Handles mm mm mm mm mm mm g 65375 60 60 chrome plated dip-coated with sure-grip surface 25 54 4 8 3 5 0.00 Circlip Pliers 6 6543 Circlip pliers for inside circlips DIN 5256 C, straight, H.D. drop forged, precision points. 65434 002 65436 002 L tips for circlip sizes size mm O mm mm Head Handles g 65434 000 J 0 40 0.9 8 3 matt chrome plated chrome plated, chequered 90 0.00 65434 00 J 40.3 2 25 90 0.00 65434 002 J 2 80.8 9 60 35 0.00 65434 003 J 3 225 2.3 40 00 95 0.00 65434 004 J 4 320 3.2 85 40 49 0.00 65436 000 J 0 40 0.9 8 3 polished dip-coated with sure-grip surface 00 0.00 65436 00 J 40.3 2 25 00 0.00 65436 002 J 2 80.8 9 60 50 0.00 65436 003 J 3 225 2.3 40 00 25 0.00 65436 004 J 4 320 3.2 85 40 462 0.00 32
6544 Circlip pliers for inside circlips DIN 5256 D, bent 90, H.D. drop forged, precision points. L tips for circlip sizes size mm O mm mm Head Handles g 65444 00 J 0 30 0.9 8 3 matt chrome plated chrome plated, chequered 90 0.00 65444 0 J 30.3 2 25 90 0.00 65444 02 J 2 70.8 9 60 35 0.00 65444 03 J 3 25 2.3 40 00 95 0.00 65444 04 J 4 300 3.2 85 40 46 0.00 65446 00 J 0 30 0.9 8 3 polished dip-coated with sure-grip surface 00 0.00 65446 0 J 30.3 2 25 00 0.00 65446 02 J 2 70.8 9 60 50 0.00 65446 03 J 3 25 2.3 40 00 25 0.00 65446 04 J 4 300 3.2 85 40 432 0.00 6545 65444 02 65446 02 Circlip pliers for outside circlips DIN 5254 A, straight, H.D. drop forged, precision points, with wear resistant compression spring. L tips for circlip sizes size mm O mm mm Head Handles g 65454 000 A 0 40 0.9 3 0 matt chrome plated chrome plated, chequered 95 0.00 65454 00 A 40.3 0 25 95 0.00 65454 002 A 2 80.8 9 60 45 0.00 65454 003 A 3 20 2.3 40 00 205 0.00 65454 004 A 4 35 3.2 85 40 437 0.00 65456 000 A 0 40 0.9 3 0 polished dip-coated with sure-grip surface 05 0.00 65456 00 A 40.3 0 25 05 0.00 65456 002 A 2 80.8 9 60 60 0.00 65456 003 A 3 20 2.3 40 00 232 0.00 65456 004 A 4 35 3.2 85 40 49 0.00 6546 65454 002 65456 002 Circlip pliers for outside circlips DIN 5254 B, bent 90, H.D. drop forged, precision points, with wear resistant compression spring. 6 65464 02 65466 02 L tips for circlip sizes size mm O mm mm Head Handles g 65464 00 A 0 25 0.9 3 0 matt chrome plated chrome plated, chequered 95 0.00 65464 0 A 25.3 0 25 95 0.00 65464 02 A 2 70.8 9 60 45 0.00 65464 03 A 3 200 2.3 40 00 0.00 65464 04 A 4 290 3.2 85 40 43 0.00 65466 00 A 0 25 0.9 3 0 polished dip-coated with sure-grip surface 05 0.00 65466 0 A 25.3 0 25 05 0.00 65466 02 A 2 70.8 9 60 60 0.00 65466 03 A 3 200 2.3 40 00 236 0.00 65466 04 A 4 290 3.2 85 40 468 0.00 33
6547 Special circlip pliers for slotted circlips for slotted circlips (as used on shafts of engines, gearboxes, differentials, clutches etc.), with wear resistant compression spring. L mm Head Handles g 65474 70 70 matt chrome plated chrome plated, chequered 54 0.00 Waterpump Pliers 655 Waterpump pliers DIN ISO 8976 (No 207 c), box joint, 7 adjustment positions, anti-squeeze protection, Chrome Vanadium. 6555240 6556240 L Jaw opening mm max. mm Head Handles g 6555 240 240 43 chrome plated multi-component handles with softer layers 365 0.00 6556 240 240 43 black lacquered, jaws polished black lacquered, box frame polished, dip-coated 30 0.00 6556 300 300 5 495 0.00 6554 Waterpump pliers, with rapid adjustment DIN ISO 8976 (No 207 c), box joint "hook" adjustment, jaw with slot, Chrome Vanadium. 6 65544250 L Jaw opening mm max. mm Head Handles g 65544250 250 ) 50 chrome plated chrome plated, chequered 476 0.00 65544 375 375 70 066 0.00 ) anti-squeeze protection Spare springs for No 6554 Spare spring for No g 69540 002 65544250 3 0.00 69540 003 65544375 4 0.00 34
6555 Chrome Vanadium. MINI-waterpump pliers L Jaw opening mm max. mm Head Handles g 65555 25 25 5 chrome plated dip-coated 78 0.00 Self Grip Wrenches 656 Wide jaw self grip wrench 80 mm jaw width, quick release lever, Chrome Vanadium. L S mm mm Head Handles g 6562 75 75 20 bright nickel-plated bright nickel-plated 364 0.00 6562 Parallel jaw self grip wrench forged jaws, quick release lever, Chrome Vanadium. L S mm mm Head Handles g 65622 250 250 50 bright nickel-plated bright nickel-plated 700 0.00 6563 Universal self grip wrenches forged jaws (one straight, one contoured), quick release lever, Chrome Vanadium. 65632 75 L S mm mm Head Handles g 65632 75 75 25 bright nickel-plated bright nickel-plated 320 0.00 65632 250 250 30 500 0.00 6 35
6564 Self grip wrenches forged contoured jaws, quick release lever, wire cutter, Chrome Vanadium. 65642 75 L S mm mm Head Handles g 65642 45 45 4 bright nickel-plated bright nickel-plated 75 0.00 65642 75 75 30 323 0.00 65642 250 250 40 528 0.00 65642 300 300 65 977 0.00 6565 Welders self grip wrench with quick release lever, Chrome Vanadium. L S mm mm Head Handles g 65652 280 280 65 bright nickel-plated bright nickel-plated 94 0.00 6566 Pipe welders self grip wrench with quick release lever, Chrome Vanadium. L S mm mm Head Handles g 65662 280 280 85 bright nickel-plated bright nickel-plated 944 0.00 6567 C-Clamp self grip wrench with quick release lever, Chrome Vanadium. 6 65672 280 L S mm mm Head Handles g 65672 75 75 75 bright nickel-plated bright nickel-plated 236 0.00 65672 280 280 85 694 0.00 36
6568 Long reach grip wrenches extra large capacity, quick release lever, Chrome Vanadium. 65682 460 L S mm mm Head Handles g 65682 460 460 80 bright nickel-plated bright nickel-plated 00 0.00 65682 600 600 240 372 0.00 657 Long nose self grip wrench specially suitable for narrow, tapering access, with quick-release lever, Chrome Vanadium. L S mm mm Head Handles g 6572 65 65 23 bright nickel-plated bright nickel-plated 90 0.00 Various Gripping Pliers 6575 Wire twisting pliers registered design, for wire locking of metal fasteners, with side cutter, serrated jaws for positive grip, jaws angled by 40, suitable for locking wires up to O.6 mm (dec. in. 0.06), for clockwise and anti-clockwise use, with automatic return action, Chrome Vanadium. 6575 220 6575 280 L mm Head Handles g 6575 220 230 gunmetal finish, polished gunmetal finish 330 0.00 6575 280 280 40 0.00 6576 Connector pliers replaceable plastic jaws, 4 adj. positions, for use on screw connections incl. Canon-connectors, or any light alloy or other tube connections, surfaces of which must not be damaged, Chrome Vanadium. 6 L mm Head Handles g 65765 230 230 chrome plated dip-coated 299 0.00 Loose plastic jaws for No 6576 g 69760 00 3 0.00 37
Side Cutters 6600 Side cutters N DIN ISO 5749, Form B, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HC. 66004 60 66005 60 L e h b mm Head Handles mm mm mm q w e r g 66004 60 60 chrome plated chrome plated, chequered 29.5 22.5 9.5 3 2.8 2.6 50 0.00 66004 80 80 32 23.5 3.8 3 2.5 2 200 0.00 66005 30 25 chrome plated multi-component handles with softer layers 24 7 8.6 2.8 2.3.5.25 05 0.00 66005 45 40 25.7 8.5 8.2 3 2.5.8.6 60 0.00 66005 60 60 29.5 22.5 9.5 3 2.8 2.6 205 0.00 66005 80 80 32 23.5 3.8 3 2.5 2 325 0.00 66006 60 60 polished dip-coated with sure-grip surface 29.5 22.5 9.5 3 2.8 2.6 65 0.00 66006 80 80 32 23.5 3.8 3 2.5 2 205 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 660 Side cutter M as No 6600, mini bevel, fitted with double leaf spring. 66006 60 6 L e h b mm Head Handles mm mm mm q w e r g 6606 0 0 polished dip-coated with sure-grip surface 5 5 8.5 2.5.5.2 0.8 69 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 38
6602 Heavy duty side cutters N DIN ISO 5749, Form A, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HC. 66024 200 66025 200 L e h b mm Head Handles mm mm mm q w e r g 66024 40 40 chrome plated chrome plated, chequered 23.5 20 9 4 3. 2.5 20 0.00 66024 60 60 25.5 25 9.5 4 3.4 2.5 2 65 0.00 66024 80 80 27.5 26.5 0.5 4 3.8 2.7 2.2 200 0.00 66024 200 200 3 28.5 4 4 3 2.5 255 0.00 66025 40 40 chrome plated multi-component handles with softer layers 23.5 20 9 4 3. 2.5 45 0.00 66025 60 60 25.5 25 9.5 4 3.4 2.5 2 200 0.00 66025 80 80 27.5 26.5 0.5 4 3.8 2.7 2.2 290 0.00 66025 200 200 3 28.5 4 4 3 2.5 30 0.00 66026 40 40 polished dip-coated with sure-grip surface 23.5 20 9 4 3. 2.5 40 0.00 66026 60 60 25.5 25 9.5 4 3.4 2.5 2 70 0.00 66026 80 80 27.5 26.5 0.5 4 3.8 2.7 2.2 230 0.00 66026 200 200 3 28.5 4 4 3 2.5 260 0.00 66026 250 250 32 29.5 2 4 4 3.5 3 375 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 6608 Lever action side cutters DIN ISO 5749, for piano wire, special steel. 66026 200 66080 90 L mm Head Handles w r g 66080 90 90 polished black lacquered 3.7 3 50 0.00 66080 225 225 4.2 3.5 555 0.00 w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire 6 39
Oblique Cutters 662 Mechanics oblique cutters M suitable for use on miniature mechanical and electronic components, precision cutting edges for hard and soft wire head angled by 28, Cu-wire 0.25 mm O may be cut at tips, alloy steel of highest quality, induction hardened mini-bevelled cutting edges, approx. 60 HC. L e h b mm Head Handles mm mm mm q w e g 6625 85 85 chrome plated dip-coated with sure-grip surface 4 3.5 9.5 2.8.5 45 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire Top Cutters 668 Top cutters, heavy duty N DIN ISO 5748, precision cutting edges for all wires, incl. piano wire, alloy steel of highest quality, induction hardened bevelled cutting edges, approx. 63 HC. L e h b b 2 mm Head Handles mm mm mm mm q w e r g 6685 60 60 chrome plated multi-component handles with softer layers 7 26.5 24 3.8 3 2.5 2 240 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 667 Lever action top cutters DIN ISO 5748, for piano wire, special steel. 6 6670 80 L mm Head Handles w r g 6670 80 80 polished black lacquered 3.7 3.0 438 0.00 6670 25 25 4.2 3.5 579 0.00 6670 235 235 4.7 4.0 766 0.00 w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire 40
Wire Stripping Pliers 6622 Wire stripping pliers with adjustment screw to cut insulation only on wire or cable, max. 5 mm O 0 mm 2 conductor cross-section. L mm Head Handles g 66225 60 60 chrome plated multi-component handles with softer layers 95 0.00 6623 Wire stripping pliers for wires from 0.5 to 5 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special steel. L mm Head Handles g 66235 60 60 chrome plated multi-component handles with softer layers 80 0.00 eplacement stripping knives ( pair) for No 6623 g 69230 00 0.00 6624 Wire stripping pliers for wires from 0.3 to.2 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special alloy steel. L mm Head Handles g 66245 60 60 chrome plated multi-component handles with softer layers 80 0.00 Cable Shears 6630 Cable shears for copper- and light alloy cables. Easy, single handed operation. Special cutter geometry to avoid pressure marks and frayed ends, adjustable joint, anti-squeeze protection, not suitable for steel- or armoured cables. 6 L mm Head Handles u i o g 6630 220 220 gun finish dip-coated with sure-grip surface 6 35 70 332 0.00 u cutting capacity in mm 2 for single wire Al-/Cu-Cable i cutting capacity in mm 2 for multiple wire Al-/Cu-Cable o cutting capacity in mm 2 for thin wire Al-/Cu-Cable 4
Electronics Pliers Z 657 Electronics flat nose pliers Z DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, precision jaws, smooth, tapering to mm, box joint for precise movement. 6576 20 6579 20 L L 3 W D h b mm Head Handles mm mm mm mm mm g 6576 20 25 polished dip-coated with sure-grip surface 20 9 6.5.5 3 48 0.00 6579 20 25 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 20 9 6.5.5 3 55 0.00 6526 Electronics round nose pliers Z DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, round precision jaws, smooth, thin,.25 mm point diameter, box joint for precise movement. 65266 20 65269 20 L L 3 W D b mm Head Handles mm mm mm mm g 65266 20 25 polished dip-coated with sure-grip surface 22 9 6.5.25 47 0.00 65269 20 25 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 22 9 6.5.25 55 0.00 6540 Electronics snipe nose pliers Z DIN ISO 9655, designed for use on miniature electronic and mechanical components, welded on double leaf spring, half round, smooth precision jaws tapering to mm O, box joint for precise movement. 65406 20 65409 20 6 L L 3 W D h b mm Head Handles mm mm mm mm mm g 65406 20 25 polished dip-coated with sure-grip surface 2 9 6.5 50 0.00 65409 20 25 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 2 9 6.5 56 0.00 42
6603 Electronics side cutters ZM strong, slim pattern, suitable for use on miniature electronic components precision cutting edges, mini bevel, suitable for soft and hard wire, incl. piano wire, Cu-wire of 0.2 mm O can be cut at the tips, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges approx. 63 HC. L e h b mm Head Handles mm mm mm q w e r g 66036 5 5 polished dip-coated with sure-grip surface 4 6.5.5 0.8 0.5 60 0.00 66039 5 5 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 4 6.5.5 0.8 0.5 60 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 6605 Electronics side cutters ZM 66036 5 66039 5 DIN ISO 9654, with wire catch to prevent uncontrolled disposal of off-cuts, box joint for precise movement, precision cutting edges, mini bevel, suitable for soft and hard wire, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HC. L e h b mm Head Handles mm mm mm q w e r g 66056 0 2 polished dip-coated with sure-grip surface 3 0.5 7.5 0.8 0.6 64 0.00 66059 0 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 3 0.5 7.5 0.8 0.6 69 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 6606 Electronics side cutters ZM 66056 0 66059 0 DIN ISO 9654, strong model, box joint for precise movement, precision cutting edges, mini bevel, suitable for piano wire, Cu-wire 0.25 mm O, can be cut at tips, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HC. 66066 0 66069 0 L e h b mm Head Handles mm mm mm q w e r g 66066 0 2 polished dip-coated with sure-grip surface 3 2 7.5.5 0.8 0.6 66 0.00 66066 30 25 8 6 0.7.2 0.8 04 0.00 66069 0 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 3 2 7.5.5 0.8 0.6 70 0.00 66069 30 25 8 6 0.7.2 0.8 0 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 6 43
6607 Electronics side cutters ZL DIN ISO 9654, slim tapered head for use in confined spaces, box joint for precise movement, precision cutting edges, no bevel suitable for flush cutting of soft and medium hard wire Cu- and diode wires, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HC. L e h b mm Head Handles mm mm mm q w g 66076 0 2 polished dip-coated with sure-grip surface 3 2 7.5.5 64 0.00 66076 30 25 8 6 0.5 04 0.00 66079 0 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 3 2 7.5.5 70 0.00 66079 30 25 8 6 0.5 0 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for piano wire 6604 Mini-electronics side cutters ZM 66076 0 66079 0 DIN ISO 9654, light, slim pattern, especially suitable for use on miniature electronic components, precision cutting edges, mini bevel, suitable for soft and hard wire, Cu-wire of 0.2 mm O can be cut at the tips, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HC. L e h b mm Head Handles mm mm mm q w e r g 66046 0 2 polished dip-coated with sure-grip surface 9 6 0.8 0.6 0.4 47 0.00 66049 0 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 9 6 0.8 0.6 0.4 53 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 663 Electronics oblique cutters ZM 66046 0 66049 0 DIN ISO 9654, tapered head for use in confined spaces, precision cutting edges for hard and soft wire, head angled by 55, Cu-wire 0.25 mm O may be cut at the tips, welded on double leaf spring, alloy steel of highest quality, induction hardened mini-bevelled cutting edges, approx. 62 HC. 6 6636 5 6639 5 L e h b b 2 mm Head Handles mm mm mm mm q w e r g 6636 5 2 polished dip-coated with sure-grip surface 7.5 0.5 0.8 0.6 0.4 54 0.00 6639 5 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 7.5 0.5 0.8 0.6 0.4 66 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 44
664 Electronics oblique cutters ZL DIN ISO 9654, as No 663, but without bevelled cutting edges, for flush cutting of soft and medium hard Cu- and diode wires. L e h b b 2 mm Head Handles mm mm mm mm q w g 6646 5 2 polished dip-coated with sure-grip surface 7.5 0.5 0.6 55 0.00 66495 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 7.5 0.5 0.6 65 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire 665 Electronics oblique cutters ZM 66465 66495 DIN ISO 9654, slim, extended head for delicate cuts in confined spaces, box joint for precise movement, precision cutting edges with mini bevel for Cu- and diode wires, head angled by 30, welded on double leaf spring, alloy steel of highest quality. L L 2 L 3 h b mm Head Handles mm mm mm mm q w g 6656 5 2 polished dip-coated with sure-grip surface 8 8 8 6 0.6 0.3 48 0.00 66595 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 8 8 8 6 0.6 0.3 54 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire 669 Electronics top cutters ZM 66565 66595 DIN ISO 9654, slim long head for use in confined space, box joint for precise movement, precision cutting edges for Cu- and diode wires, mini-bevel, welded on double leaf spring, alloy steel of highest quality. 66965 66995 L e W h b b 2 mm Head Handles mm mm mm mm mm q w g 6696 5 2 polished dip-coated with sure-grip surface 5.5 8.5 5.5 6 5 0.6 0.3 65 0.00 66995 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 5.5 8.5 5.5 6 5 0.6 0.3 55 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire 6 45
6620 Electronics top cutters ZM DIN ISO 9654, precision cutting edges for soft and hard wires, mini-bevel, head angled 90, pointed head, Cu-wire 0.25 mm O may be cut at the tips, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, mini bevel approx. 60 HC. L e h b b 2 mm Head Handles mmmmmmmm q w e r g 66206 5 2 polished dip-coated with sure-grip surface 6.5 7.5 0.8 0.6 0.4 82 0.00 66209 5 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 6.5 7.5 0.8 0.6 0.4 62 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 662 Electronics top cutters ZL 66206 5 66209 5 DIN ISO 9654, as No 6620, but without bevelled cutting edge, for flush cutting of soft and medium hard Cu- and diode wires, alloy steel of highest quality, induction hardened cutting edges, approx. 60 HC. 6626 5 6629 5 L e h b b 2 mm Head Handles mm mm mm mm q w g 6626 5 2 polished dip-coated with sure-grip surface 6.5 7.5 0.6 82 0.00 6629 5 2 polished with dissipative sleeves, antistatic-dissipation > x 0 5 and < x 0 2 Ω 6.5 7.5 0.6 62 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire VDE Pliers 650 Combination pliers DIN ISO 5746, precision cutter for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HC, for long life. 6 6507 60 L mm Head Handles e r t z g 6507 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V.8.5 0 6 202 0.00 6507 80 80 2.8 2 6 279 0.00 6507 200 200 2.5 2 3 6 359 0.00 e cutting capacity in mm for hard wire r cutting capacity in mm for piano wire t cutting capacity in mm for cable z cutting capacity in mm 2 for cable 46
6508 Flat nose pliers, long DIN ISO 5745, long, flat serrated jaws. L L 3 W D h b mm Head Handles mm mm mm mm mm g 65087 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 50 5 8 3 5 48 0.00 6523 ound nose pliers, short DIN ISO 5745, for bending wire loops and rings, short, round, ground jaws, fine serrations on gripping areas. L L 3 W D b mm Head Handles mm mm mm mm g 65237 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 30 8 0 3 20 0.00 6524 ound nose pliers, long DIN ISO 5745, for bending wire loops and rings, long, round, ground jaws, fine serrations on gripping areas. L L 3 W D b mm Head Handles mm mm mm mm g 65247 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 47 5.5 8.5 2.5 62 0.00 6529 Snipe nose pliers with cutter (radio- or telephone pliers) DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HC. 65297 60 6 L L 3 W D h b mm Head Handles mm mm mm mm mm g 65297 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 5 6 9 3 2.5 74 0.00 65297 200 200 73 7 9 3 2.5 226 0.00 47
6530 Snipe nose pliers with cutter (radio- or telephone pliers) DIN ISO 5745, Form B, bent 45, half round, long tapering, serrated jaws, with burner hole, precision cutters for soft and hard wires, induction hardened cutting edges, approx. 60 HC. L L 2 L 3 W D h b mm Head Handles mm mm mm mm mm mm g 65307 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 24 55 6 9 3 2.5 85 0.00 65307 200 200 28 76 7 9 3.5 3 230 0.00 6533 half round, long tapering, serrated jaws. Mechanics snipe nose pliers 65307 200 L L 3 W D h b mm Head Handles mm mm mm mm mm g 65337 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 50 5 8 3 2.5 47 0.00 6600 Side cutters N DIN ISO 5749, Form B, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HC. 66007 60 L e h b mm Head Handles mm mm mm q w e r g 66007 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 23.5 20 9 3 2.8 2.6 25 0.00 66007 80 80 25.5 25 9.5 3.8 3 2.5 2 270 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 6 6602 Heavy duty side cutters N DIN ISO 5749, Form A, precision cutter for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HC. 66027 200 L e h b mm Head Handles mm mm mm q w e r g 66027 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 25.5 25 9.5 4 3.4 2.5 2 220 0.00 66027 80 80 27.5 26.5 0.5 4 3.8 2.7 2.2 265 0.00 66027 200 200 3 28.5 4 4 3 2.5 325 0.00 66027 250 250 32 29.5 2 4 4 3.5 3 475 0.00 q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire 48
6622 Wire stripping pliers with adjustment screw to cut insulation only on wire or cable, max. 5 mm O 0 mm 2 conductor cross-section. L mm Head Handles g 66227 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 80 0.00 6623 Wire stripping pliers for wires from 0.5 to 5 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special steel. L mm Head Handles g 66237 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 24 0.00 eplacement stripping knives ( pair) for No 6623 g 69230 00 0.00 6624 Wire stripping pliers for wires from 0.3 to.2 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special alloy steel. L mm Head Handles g 66247 60 60 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 25 0.00 6630 Cable shears for copper and light alloy cables. Easy, single handed operation. Special cutter geometry to avoid pressure marks and frayed ends, adjustable joint, anti-squeeze protection, not suitable for steel or armoured cables. 6 L mm Head Handles u i o g 66307 220 220 chrome plated dip-coated insulation, DIN EN 60900, T AC/000 V 6 35 70 380 0.00 u cutting capacity in mm 2 for single wire Al-/Cu-Cable i cutting capacity in mm 2 for multiple wire Al-/Cu-Cable o cutting capacity in mm 2 for thin wire Al-/Cu-Cable 49
0940 DIN 528, with two plane faces. ubber composition hammers 0956 Spare nylon heads these are lightly heated and then tapped into position. 7 O L L 2 mm mm mm g S 704000 55 320 90 37 2 0.00 7040002 65 350 5 527 2 0.00 7040003 75 350 30 780 2 0.00 7040004 90 380 40 90 2 0.00 0955 Plastic hammers with interchangeable heads of impact resisting cellulose acetate and ash handles. O L L 2 mm mm mm g S 7060027 27 265 90 25 6 0.00 7060032 32 280 00 325 6 0.00 7060035 35 290 05 400 2 0.00 7060040 40 320 0 550 2 0.00 7060050 50 340 5 860 2 0.00 7060060 60 380 35 365 2 0.00 0955 Spare plastic heads of impact resisting cellulose acetate, these are lightly heated and then tapped into position. O mm g S 79040027 27 3 5 0.00 79040032 32 2 0 0.00 79040035 35 28 0 0.00 79040040 40 37 0 0.00 79040050 50 65 0 0.00 79040060 60 08 0 0.00 0956 with interchangeable heads of shockproof nylon vestamid and EUOPLUS handles. Nylon hammers O L L 2 mm mm mm g S 7070027 27 265 90 25 6 0.00 7070032 32 280 00 325 6 0.00 7070035 35 290 05 400 2 0.00 7070040 40 320 0 550 2 0.00 7070050 50 340 5 860 2 0.00 7070060 60 380 35 365 2 0.00 O mm g S 79050027 27 0 0 0.00 79050032 32 7 0 0.00 79050035 35 23 0 0.00 79050040 40 28 0 0.00 79050050 50 52 0 0.00 79050060 60 83 0 0.00 0957 recoilless; with interchangeable heads and hickory handles. Plastic hammers O L L 2 mm mm mm g S 7090025 25 320 08 320 6 0.00 7090030 30 350 5 460 6 0.00 7090035 35 355 8 580 6 0.00 7090040 40 375 25 760 2 0.00 7090045 45 380 30 000 2 0.00 7090050 50 385 35 250 2 0.00 7090060 60 420 65 900 2 0.00 0957 Spare plastic heads O mm g S 79090025 25 4 0 0.00 79090030 30 9 0 0.00 79090035 35 26 0 0.00 79090040 40 38 0 0.00 79090045 45 52 0 0.00 79090050 50 72 0 0.00 79090060 60 8 0 0.00 0958 aluminium, cylindrical, with hickory handle. Embossing hammer O L L 2 mm mm mm g S 70240040 40 340 55 648 2 0.00 52
0960 with ash handles, DIN 04. Engineers hammers L L 2 g mm mm g S 700005 00 260 82 48 6 0.00 70000 200 280 95 254 6 0.00 700004 300 300 05 396 6 0.00 700002 500 320 8 64 6 0.00 700006 800 350 30 95 2 0.00 700003 000 360 35 32 2 0.00 700007 500 380 45 65 2 0.00 700008 2000 400 55 2285 2 0.00 02 DIN 6453, chrome vanadium steel, lacquered silver. Cold chisels L b size mm mm g S 70020002 25 25 5 96 0 0.00 70020003 50 50 8 72 0 0.00 70020004 75 75 2 269 0 0.00 70020005 200 200 24 379 5 0.00 70020007 250 250 25 479 5 0.00 70020008 300 300 26 59 5 0.00 03 DIN 645, flat, chrome vanadium steel, lacquered silver. Cross-cut chisels 0970 with ash handles. Engineers hammers L b size mm mm g S 70040003 50 50 6 47 0 0.00 70040004 75 75 7 239 0 0.00 70040005 200 200 8 340 5 0.00 70040007 250 250 9 44 5 0.00 L L 2 lb. mm mm g S 702000 /4 270 67 76 6 0.00 7020005 /2 290 82 320 6 0.00 7020006 3/4 30 93 454 6 0.00 7020002 320 99 575 6 0.00 7020004 /2 350 8 790 2 0.00 7020003 2 380 26 044 2 0.00 00 of tough tempered special steel, chrome plated. ibbed cold chisels L b size mm mm g S 7000004 4 00 5 5 0 0.00 7000005 5 25 8 93 0 0.00 7000006 6 50 20 65 0 0.00 7000008 8 200 26 305 5 0.00 700000 0 250 30 507 5 0.00 700002 2 300 35 807 5 0.00 0 flat, chrome vanadium steel, lacquered silver. Grooving chisel L b mm mm g S 7008000 240 26 292 5 0.00 2 as No 0, but with finger protector. Grooving chisel L b mm mm g S 70080002 240 26 4 5 0.00 2/ Finger protector for Cold Chisels No 02 and Cross-cut Chisels No 03 from 200 mm onward, for Grooving chisel No 0, shaft section 23 x 3 mm. g S 796000 0 5 0.00 7 53
04 Drift pins DIN 6458, octagonal, chrome vanadium, lacquered silver. 09 with guide bush. Pin punches x w L size mm mm mm g S 70060007 20 x 2 2 0 20 60 0 0.00 7006000 20 x 3 3 0 20 60 0 0.00 70060002 20 x 4 4 0 20 62 0 0.00 70060008 20 x 5 5 0 20 64 0 0.00 70060003 20 x 6 6 0 20 66 0 0.00 70060009 20 x 8 8 2 20 68 0 0.00 70060006 75 x 8 8 6 75 244 0 0.00 05 Centre punches DIN 7250, octagonal, chrome vanadium, lacquered silver. w L size mm mm g S 7005000 00 x 0 0 00 52 0 0.00 70050005 20 x 0 0 20 63 0 0.00 70050002 20 x 2 2 20 90 0 0.00 70050003 30 x 2 2 30 99 0 0.00 70050004 50 x 4 4 50 54 0 0.00 08 Parallel pin punches DIN 6450, octagonal, chrome vanadium, lacquered silver. x w L size mm mm mm g S 700752 5 x 2 2 8 5 30 0 0.00 7007003 25 x 3 3 8 25 35 0 0.00 7007000 50 x 2.5 2.5 0 50 65 0 0.00 70070002 50 x 3 3 0 50 62 0 0.00 70070003 50 x 4 4 0 50 64 0 0.00 70070004 50 x 5 5 0 50 67 0 0.00 70070005 50 x 6 6 0 50 72 0 0.00 70070006 50 x 8 8 0 50 8 0 0.00 70070009 75 x 3 ) 3 0 75 57 0 0.00 7007000 75 x 4 2 ) 4 0 75 64 0 0.00 7007002 75 x 6 3 ) 6 0 75 69 0 0.00 70070008 200 x 8 8 2 200 4 0 0.00 700700 200 x 0 0 2 200 59 0 0.00 ) for use on OPEL Kadett C 2 ) for use on Mercedes-Benz 3 ) with guide bush for use on retaining pins of disc brake pads, all brake calipers on OPEL Ascona B, C, Manta B, Kadett D, Astra x diameter of tip w size of handle, octagon v x L size mm mm mm g S 7009000 0.9 5 80 7 0 0.00 70090002 2.4 5.5 82 2 0 0.00 70090003 3.8 6 86 2 0 0.00 70090004 4 2.4 7 95 8 0 0.00 70090005 5 2.8 7 97 9 0 0.00 70090006 6 3.4 8 00 25 0 0.00 70090007 7 3.9 9 00 27 0 0.00 70090008 8 * 5.9 0 03 47 0 0.00 v diameter of tip x diameter of handle * without guide bush ES 02/08/09/4 75 x 350 x 30 mm, 4 pieces g 9683823 555 0.00 No 02 No 08 75 mm 50 x 6; 75 x 6 mm No 09 size 6; 00 x 3.4 mm 8382027 Empty tray 5 0.00 ES 02/05/08/8 75 x 350 x 33 mm, 8 pieces g 9683824 900 0.00 No 02 No 05 75 mm 20 x 2 mm No 08 50 x 2.5; 50 x 3; 50 x 4; 50 x 5; 50 x 6; 50 x 8 mm 8382036 Empty tray 4 0.00 7 54
02-5/6 6 pieces content: each No 06/25 mm No 06/50 mm No 07/25 mm No 04/20 x 2; 20 x 4 mm No 05/20 x 0 mm D = in plastic stand Pc = in plastic wallet Sets: Chisels, pins, punches No g S 988220 02-5/6 D 445 0.00 9882202 02-5/6 Pc 426 5 0.00 04-5/6 6 pieces Content: each No 04/20 x 2; 20 x 3; 20 x 4; 20 x 5; 20 x 6 mm No 05/20 x 0 mm D = in plastic stand Pc = in plastic wallet Sets: Drift pins, centre punches 0670 special steel. Three square engineers scrapers L mm g S 7206000 205 76 5 0.00 72060002 230 84 5 0.00 72060003 255 05 5 0.00 72060004 275 5 5 0.00 72060005 300 48 5 0.00 0672 special steel. Flat engineers scrapers mm g S 72050004 20 x 305 206 5 0.00 72050005 25 x 365 364 5 0.00 0676 special steel. Three square engineers bearing scrapers mm g S 72080003 85 x 2 x 305 46 5 0.00 No g S 9670060 04-5/6 D 47 0.00 96700602 04-5/6 Pc 392 5 0.00 2025 Engineers file, round 05-8/6K 6 pieces in transparent plastic container stand. Content: each No 08/50 x 2.5; 50 x 3; 50 x 4; 50 x 5; 50 x 6 mm; DIN 6450/ Form C No 05/20 x 0 mm; DIN 7250 Pin punch-/centre punch set g S 967007 483 0.00 08/6 6 pieces Content: each No 08/50 x 2.5; 50 x 3; 50 x 4; 50 x 5; 50 x 6; 50 x 8 mm D = in plastic stand Pc = in plastic wallet Sets: Parallel pin punches No g S 9670070 08/6 D 450 0.00 96700702 08/6 Pc 424 5 0.00 L mm g S 7220000 200 96 5 0.00 2030 Engineers file, half round L mm g S 7230000 250 285 5 0.00 2035 Engineers file, three-square L mm g S 7240000 200 67 5 0.00 2036 Engineers file, hand L mm g S 7270002 250 335 5 0.00 7 55
2200 forged C 35, width of jaws 48 mm. Hand vice 2900N as per DIN 862, vernier readings /20 mm and /28", stainless steel, c/w plastic pouch. Vernier calliper L mm g S 7200000 45 673 0.00 2050 adjustable, with blade size 300 mm/2". Tubular hacksaw L mm g S 7220000 465 490 0.00 Spare hacksaw blades for No 2050 0 pieces, H.S. Steel, 24 teeth per inch. measuring range mm/" g S 773700 50/6 85 0.00 2900/N Vernier calliper with a large digital display, automatic shut-off, switch for mm/inches, depth gauge, S232C interface, spare battery, differential measurements by means of 0 reset function, display accuracy 0.0 mm / 0.0005", in plastic case. measuring range mm/" g S 7737002 50/6 32 0.00 L mm g S 798000 300 74 0.00 30 Metric-Inch scales, length 300 mm. Steel rule 2053 Hacksaw frame Divisions Divisions size Top Edge " Lower Edge mm g S 7746000 /6, /32, /64 0.5; 76 5 0.00 L mm g S 7220002 252 59 0.00 295 steel, chrome plated atchet tap holders Spare hacksaw blades for No 2053 6 pieces, Chrome Alloy Tool Steel, 32 teeth per inch. 7 L mm g S 7980002 58 23 0.00 904 Stud remover Suitable for all sizes of studs from 6 2 mm Also suitable for percussion screwdriver use. Will cope with rusted or scalecoated screws with a minimum of 3 mm protruding. Chuck: size 36 mm Clamping screw: size 24 mm a " g S 7340000 3/8 420 0.00 CapacityL size mm DIN ) ISO 2 ) mm g S 7739000 2.0 5.0 M2 8 M 6 85 80 0.00 77390002 2 4.6 8 M5 2 M6 2 0 305 0.00 77390003 3 2.0 5.0 M2 8 M 6 250 25 0.00 77390004 4 4.6 8 M5 2 M6 2 300 428 0.00 ) for taps DIN 2 ) for taps ISO 300 6 pieces, in plastic wallet, Content: file each, round, half round, three square, square, hand, flat Set of needle files L mm g S 9672280 40 46 0.00 56
2932 Padlock 2920N with non-twisting, oval-section telescopic rod. Telescopic mirror g S 7720002 85 0.00 2320 with stainless blade. 232 Electricians cable knife Blade mm g S 77020000 90 8 0 0.00 Engineers scriber L mm mm g S 774000 65 x 43 200 560 65 0.00 2920N- eplacement mirror for No 2920N g S 794000 43 0.00 2920N-2 Stainless steel replacement mirror for No 2920N g S 7940002 43 0.00 292N Telescopic mirrors L mm g S 7700000 250 3 0 0.00 35 for use on light alloys. Brass wire brush L mm ows g S 7747000 280 4 34 0.00 2600 Magnetic lifters lifting power O L g mm mm g S 77260027 270 ) 5 500 25 0.00 77260025 500 8 460 80 0.00 77260060 800 5 520 230 0.00 77260200 3000 9 520 297 0.00 ) Miniature magnetic lifter with tiny head, very powerful 290 for slotted nuts as per DIN 80, adjustable. Adjustable hook spanners A size mm g S 440000 20 42 90 5 0.00 4400002 2 45 90 245 5 0.00 4400003 3 95 65 686 5 0.00 O L mm mm g S 7740030 30 80 530 08 0.00 7740040 40 80 530 2 0.00 7740050 50 80 530 35 0.00 7740060 60 80 530 50 0.00 292N eplacement mirror for 292N O mm g S 7940030 30 0 0.00 7940040 40 5 0.00 7940050 50 20 0.00 7940060 60 27 0.00 320 Telescopic mirror with illumination and concave mirror, in wooden box, with battery. O L mm mm g S 7748000 55 350 800 805 0.00 2922N Claw lifter O L mm mm g S 77400003 7 525 96 5 0.00 7 57
294 230 V, 50 60 Hz, 00 W. Soldering gun 326 Torch ABS body with high-impact polycarbonate lens. Approved by FM, CSA, AUS and MSHA as non flammable. Laser-SPOT xenon lamp module generates a finely focussed white collimation light beam with a net intensity up to 400% higher than normal. 2.000 candlepower. Bulb lifetime: 30 hours. With black rubber lens protection. Conforms to US military regulations - Class. I Div. USA. Takes 3 alkali batteries (C) (not included). Suitable for underwater use. Waterproof up to 00 m. g S 77420002 00 0.00 eplacement tips for soldering gun No 294 No Sizes g S 7940002 294/ thick20 0.00 7940003 294/2 medium 9 0.00 7940004 294/3 fine 8 0.00 2942 230 V, 50 60 Hz, 20/40 W. Soldering iron L mm g S 77490002 9 60 0.00 327 Torch Made of high-impact polycarbonate resin developed for space use. Focussed beam; with light deflector. Approved by FM, SA, and CENELEC as non flammable. Bulb lifetime: 20 hours. Suitable for underwater use. Waterproof to 50 m. Consisting of: torch, light deflector for deflecting beam through 90, 2 alkali batteries (AAA). g S 77420003 30 0.00 2943 230 V, 50 60 Hz. Soldering iron W g S 77420004 20 04 0.00 77420005 30 05 0.00 77420006 50 0 0.00 2942 eplacement tips for No 2942, 2943 g S 7940005 4 0.00 L mm g S 77490003 20 80 0.00 TCS 326/327/2 xö 75 x 350 x 60 mm, 2 pieces g 9683004 475 0.00 7 No 326 No 327 58
Spares for torches for No g S 79490002 326 (Spare lens) 33 0.00 79490003 327 (Spare lens) 7 0.00 79490004 326 (Bulb unit) 25 0.00 79490005 327 (Bulb unit) 0 0.00 330 straight, blunt, finely milled inside, stainless steel. Tweezers 335 with smooth cutting edges, nickel-plated, plastic covered handles. Wire cutter L mm g S 7527000 45 93 0.00 L mm g S 7750000 60 25 5 0.00 33 bent, blunt, finely milled inside, stainless steel. Tweezers L mm g S 775000 50 22 5 0.00 7 59