DM7442A BCD to Decimal Decoders

Similar documents
DM7445 BCD to Decimal Decoders/Drivers

DM7473 Dual Master-Slave J-K Flip-Flops with Clear and Complementary Outputs

DM74LS11 Triple 3-Input AND Gates

DM74LS138, DM74LS139 Decoders/Demultiplexers

DM74LS02 Quad 2-Input NOR Gates

DM74LS154 4-Line to 16-Line Decoder/Demultiplexer

DM74LS90/DM74LS93 Decade and Binary Counters

DM74LS174/DM74LS175 Hex/Quad D Flip-Flops with Clear

DM74LS181 4-Bit Arithmetic Logic Unit

74F139 Dual 1-of-4 Decoder/Demultiplexer

74F138 1-of-8 Decoder/Demultiplexer

54LS85 DM54LS85 DM74LS85 4-Bit Magnitude Comparators

MM74HC4020 MM74HC Stage Binary Counter 12-Stage Binary Counter

54153 DM54153 DM74153 Dual 4-Line to 1-Line Data Selectors Multiplexers

9312 DM9312 One of Eight Line Data Selectors Multiplexers

54LS352 DM74LS352 Dual 4-Line to 1-Line Data Selectors Multiplexers

DM7446A DM5447A DM7447A BCD to 7-Segment Decoders Drivers

DM5490 DM7490A DM7493A Decade and Binary Counters

9321 DM9321 Dual 1-of-4 Decoder

54LS20 DM54LS20 DM74LS20 Dual 4-Input NAND Gates

54LS00 DM54LS00 DM74LS00 Quad 2-Input NAND Gates

54LS153 DM54LS153 DM74LS153 Dual 4-Line to 1-Line Data Selectors Multiplexers

DM74184 DM74185A BCD-to-Binary and Binary-to-BCD Converters

DM7404 Hex Inverting Gates

9334 DM Bit Addressable Latch

74LCX138 Low Voltage 1-of-8 Decoder/Demultiplexer with 5V Tolerant Inputs

74F365 Hex Buffer/Driver with 3-STATE Outputs

54LS256 DM74LS256 Dual 4-Bit Addressable Latch

DM54LS47 DM74LS47 BCD to 7-Segment Decoder Driver with Open-Collector Outputs

DM54LS259 DM74LS259 8-Bit Addressable Latches

Features. Y LS174 contains six flip-flops with single-rail outputs. Y LS175 contains four flip-flops with double-rail outputs

93L34 8-Bit Addressable Latch

Features. Y TRI-STATE versions LS157 and LS158 with same pinouts. Y Schottky-clamped for significant improvement in A-C.

DM54LS73A DM74LS73A Dual Negative-Edge-Triggered

54LS109 DM54LS109A DM74LS109A Dual Positive-Edge-Triggered J-K Flip-Flops

DM Bit Addressable Latch

DM Quad 2-Input NAND Buffers with Open-Collector Outputs

DM74LS375 4-Bit Latch

DM74LS02 Quad 2-Input NOR Gate

DM7417 Hex Buffers with High Voltage Open-Collector Outputs

CD4028BM CD4028BC BCD-to-Decimal Decoder

54173 DM54173 DM74173 TRI-STATE Quad D Registers

54AC32 Quad 2-Input OR Gate

MM54HC148 MM74HC Line Priority Encoder

DM74LS08 Quad 2-Input AND Gates

Features. Y Low power TTL Fan out of 2 driving 74L. Y 5V 10V 15V parametric ratings. Y Symmetrical output characteristics

DM7490A Decade and Binary Counter

74F161A 74F163A Synchronous Presettable Binary Counter

DM7446A, DM7447A BCD to 7-Segment Decoders/Drivers

DM74LS90 DM74LS93 Decade and Binary Counters

DM74LS09 Quad 2-Input AND Gates with Open-Collector Outputs

CD4023M CD4023C Triple 3-Input NAND Gate CD4025M CD4025C Triple 3-Input NOR Gate

74LVQ174 Low Voltage Hex D-Type Flip-Flop with Master Reset

CD4028BC BCD-to-Decimal Decoder

Features. Y Low power TTL Fan out of 2 driving 74L. Y 5V 10V 15V parametric ratings. Y Symmetrical output characteristics

MM54HC154 MM74HC154 4-to-16 Line Decoder

CD4028BC BCD-to-Decimal Decoder

DM74LS05 Hex Inverters with Open-Collector Outputs

Features. Y Wide supply voltage range 3 0V to 15V. Y High noise immunity 0 45 VDD (typ ) Y Low power TTL fan out of 2 driving 74L

Features. Y Low power TTL Fan out of 2 driving 74L. Y 5V 10V 15V parametric ratings. Y Symmetrical output characteristics

CD4029BM CD4029BC Presettable Binary Decade Up Down Counter

CD4723BM CD4723BC Dual 4-Bit Addressable Latch CD4724BM CD4724BC 8-Bit Addressable Latch

54AC258 54ACT258 Quad 2-Input Multiplexer with TRI-STATE Outputs

CD4070BM CD4070BC Quad 2-Input EXCLUSIVE-OR Gate CD4077BM CD4077BC Quad 2-Input EXCLUSIVE-NOR Gate

MM54HC08 MM74HC08 Quad 2-Input AND Gate

Features. Y Wide supply voltage range 3V to 15V. Y Guaranteed noise margin 1V. Y High noise immunity 0 45 VCC (typ )

DM74LS353 Dual 4-Input Multiplexer with TRI-STATE Outputs

MM54HC175 MM74HC175 Quad D-Type Flip-Flop With Clear

CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger

DM74LS75 Quad Latch. DM74LS75 Quad Latch. General Description. Ordering Code: Connection Diagram. Logic Diagram. Function Table (Each Latch)

DM74ALS109A Dual J-K Positive-Edge-Triggered Flip-Flop with Preset and Clear

54LS160A DM74LS160A 54LS162A DM74LS162A Synchronous Presettable BCD Decade Counters

DM54LS450 DM74LS Multiplexer

Features. Y Wide supply voltage range 3 0V to 15V. Y Guaranteed noise margin 1 0V. Y High noise immunity 0 45 VCC (typ )

74VHC574 74VHCT574 Octal D-Type Flip-Flop with 3-STATE Outputs

Features. Y Wide supply voltage range 3V to 15V. Y High noise immunity 0 45 VDD (typ ) Y Low power TTL compatibility Fan out of 2

MM54HC73 MM74HC73 Dual J-K Flip-Flops with Clear

DM74LS670 3-STATE 4-by-4 Register File

MM54C14 MM74C14 Hex Schmitt Trigger

54AC 74AC11 Triple 3-Input AND Gate


74F30 8-Input NAND Gate

MM54HC244 MM74HC244 Octal TRI-STATE Buffer

54AC174/54ACT174 Hex D Flip-Flop with Master Reset

CD4070BM CD4070BC Quad 2-Input EXCLUSIVE-OR Gate CD4077BM CD4077BC Quad 2-Input EXCLUSIVE-NOR Gate

MM54HC194 MM74HC194 4-Bit Bidirectional Universal Shift Register

DS34C87T CMOS Quad TRI-STATE Differential Line Driver

CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger

MM54HC251 MM74HC251 8-Channel TRI-STATE Multiplexer

DM74LS74A Dual Positive-Edge-Triggered D Flip-Flops with Preset, Clear and Complementary Outputs

CD4013BM CD4013BC Dual D Flip-Flop

DM74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver

Features. Y Wide supply voltage range 3 0V to 15V. Y High noise immunity 0 45 VDD (typ ) Y Low power TTL fan out of 2 driving 74L

MM54C221 MM74C221 Dual Monostable Multivibrator

MM54HC373 MM74HC373 TRI-STATE Octal D-Type Latch

CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset

DS1691A/DS3691 (RS-422/RS-423) Line Drivers with TRI-STATE Outputs

onlinecomponents.com

CGS74CT to 4 Minimum Skew (300 ps) Clock Driver

74F139 Dual 1-of-4 Decoder/Demultiplexer

Transcription:

DM7442A BCD to Decimal Decoders General Description These BCD-to-decimal decoders consist of eight inverters and ten, four-input NAND gates. The inverters are connected in pairs to make BCD input data available for decoding by the NAND gates. Full decoding of input logic ensures that all outputs remain off for all invalid (10 15) input conditions. Features n Diode clamped inputs Connection Diagram Dual-In-Line Package March 1998 n Also for application as 4-line-to-16-line decoders; 3-line-to-8-line decoders n All outputs are high for invalid input conditions n Typical power dissipation 140 mw n Typical propagation delay 17 ns n Alternate Military/Aerospace device (5442A) is available. Contact a Fairchild Semiconductor Sales Office/Distributor for specifications. DM7442A BCD to Decimal Decoders DS006516-1 Order Number 5442ADMQB, 5442AFMQB, DM5442AJ, DM5442AW or DM7442AN See Package Number J16A, N16E or W16A 1998 Fairchild Semiconductor Corporation DS006516 www.fairchildsemi.com

Function Table No. BCD Input Decimal Output D C B A 0 1 2 3 4 5 6 7 8 9 0 L L L L L H H H H H H H H H 1 L L L H H L H H H H H H H H 2 L L H L H H L H H H H H H H 3 L L H H H H H L H H H H H H 4 L H L L H H H H L H H H H H 5 L H L H H H H H H L H H H H 6 L H H L H H H H H H L H H H 7 L H H H H H H H H H H L H H 8 H L L L H H H H H H H H L H 9 H L L H H H H H H H H H H L I H L H L H H H H H H H H H H N H L H H H H H H H H H H H H V H H L L H H H H H H H H H H A H H L H H H H H H H H H H H L H H H L H H H H H H H H H H I H H H H H H H H H H H H H H D H = High Level L = Low Level www.fairchildsemi.com 2

Absolute Maximum Ratings (Note 1) Supply Voltage 7V Input Voltage 5.5V Operating Free Air Temperature Range Recommended Operating Conditions DM54 and 54 DM74 Storage Temperature Range 55 C to +125 C 0 C to +70 C 65 C to +150 C Symbol Parameter DM5442A DM7442A Units Min Nom Max Min Nom Max V CC Supply Voltage 4.5 5 5.5 4.75 5 5.25 V V IH High Level Input Voltage 2 2 V V IL Low Level Input Voltage 0.8 0.8 V I OH High Level Output Current 0.8 0.8 ma I OL Low Level Output Current 16 16 ma T A Free Air Operating Temperature 55 125 0 70 C Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics table are not guaranteed at the absolute maximum ratings. The Recommended Operating Conditions table will define the conditions for actual device operation. Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Min Typ Max Units (Note 2) V I Input Clamp Voltage V CC = Min, I I = 12 ma 1.5 V V OH High Level Output V CC = Min, I OH = Max 2.4 3.4 V Voltage V IL = Max, V IH = Min V OL Low Level Output V CC = Min, I OL = Max 0.2 0.4 V Voltage V IH = Min, V IL = Max I I Input Current @ Max V CC = Max, V I = 5.5V 1 ma Input Voltage I IH High Level Input Current V CC = Max, V I = 2.4V 40 µa I IL Low Level Input Current V CC = Max, V I = 0.4V 1.6 ma I OS Short Circuit V CC = Max DM54 20 55 ma Output Current (Note 3) DM74 18 55 I CC Supply Current V CC = Max DM54 28 41 ma (Note 4) DM74 28 56 Note 2: All typicals are at V CC = 5V, T A = 25 C. Note 3: Not more than one output should be shorted at a time. Note 4: I CC is measured with all outputs open and all inputs grounded. 3 www.fairchildsemi.com

Switching Characteristics at V CC = 5V and T A = 25 C Symbol Parameter Conditions Min Max Units t PHL Propagation Delay Time C L = 15 pf High to Low Level Output R L = 400Ω 25 ns 2 Levels of Logic t PHL Propagation Delay Time High to Low Level Output 30 ns 3 Levels of Logic t PLH Propagation Delay Time Low to High Level Output 25 ns 2 Levels of Logic t PLH Propagation Delay Time Low to High Level Output 30 ns 3 Levels of Logic Logic Diagram DS006516-2 www.fairchildsemi.com 4

Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Ceramic Dual-In-Line Package (J) Order Number 5442ADMQB or DM5442AJ Package Number J16A 16-Lead Molded Dual-In-Line Package (N) Order Number DM7442AN Package Number N16E 5 www.fairchildsemi.com

DM7442A BCD to Decimal Decoders Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Ceramic Flat Package (W) Order Number 5442AFMQB or DM5442AW Package Number W16A LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE- VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMI- CONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Fairchild Semiconductor Corporation Americas Customer Response Center Tel: 1-888-522-5372 www.fairchildsemi.com Fairchild Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 8 141-35-0 English Tel: +44 (0) 1 793-85-68-56 Italy Tel: +39 (0) 2 57 5631 Fairchild Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: +852 2737-7200 Fax: +852 2314-0061 National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.