Updating the International Standard Classification of Occupations (ISCO) Draft ISCO-08 Group Definitions: Occupations in Chemicals

Similar documents
1) Batching Methods (Add Weigh or Loss In Weight) based on batch dispensing time, time between batches, head room, floor space, accuracy and budget.

TECHNICAL MANUAL 820 LX / 910 LX / 1300 LX

Unit OperatiOn. Table 1: List of some unit operations

An Introduction to Pharmaceutical & Chemical Process Technology. Paul Ashall

PTG-NIR Powder Characterisation System (not yet released for selling to end users)

Pre-owned - 8 colour press FA-Line: FA-4* NEXT CLEANINKING #F4733 MODULAR 16" MULTI-SUBSTRATE FLEXO PRESS

Advanced Olefin Polymer Reactor Fundamentals and Troubleshooting

Overview of Control System Design

Planning and Scheduling of batch processes. Prof. Cesar de Prada ISA-UVA

Figure 1 Enlargement of Powdered Activated Carbon by microscope.

Hazard Communication

INCIDENT DURING NITRATION IN A BATCH REACTOR. K DIXON-JACKSON C.CHEM MRSC MSc*

Chemical Engineering 3P04 Process Control Tutorial # 1 Learning goals

GEOGRAPHIC INFORMATION SYSTEMS SPECIALIST 3 DEFINITION:

The conceptual view. by Gerrit Muller University of Southeast Norway-NISE

PROCESS ECONOMICS PROGRAM

Swiss Medic Training Sampling

Technical Paper. Spray Granulation Gives Solid Materials Customized. The properties of spray-granulated products can be as varied as their appearance

GIS TECHNICIAN I GIS TECHNICIAN II

2Fe 2 O 3 +3H 2 S FeS+FeS x +S+3H 2 O

Lab 1: Safety Lab; Introduction to Volumetric and Weighing Techniques

Dear Sirs, MZUTL homogenizing mixers with integrated cover lifting system e.g. 200 liters

OXITEST Oxidation Test Reactor

Chemical Engineering

PID Control of a Batch ph Process with a Strong Acid

Worked Examples Intentional Chemistry Example

RHS 980C OPERATION MANUAL

STATE OF COLORADO DESIGN CRITERIA FOR POTABLE WATER SYSTEMS WATER QUALITY CONTROL DIVISION. Price: $5.00. Revised March 31, 1997

I N J E C T I O N M O U L D I N G F A C T O R Y

Advanced Chemical Reaction Engineering Prof. H. S. Shankar Department of Chemical Engineering IIT Bombay. Lecture - 03 Design Equations-1

SYMBIOSIS CENTRE FOR DISTANCE LEARNING (SCDL) Subject: production and operations management

THERAPEUTIC GOODS SAMPLING Application to Tablet Manufacture and Ingredients. David Edmonds CMC Regulatory

(2) those made, wholly or partially, of the raw materials from the region and produced or processed with the particular techniques in the region;

DIGITAL ABBE REFRACTOMETER INE-WYA-2S OPERATING INSTRUCTION PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION

Amistad Dam Investigation and Oversight: Karst- Founded Dam on the USA-Mexico Border

Reprinted from February Hydrocarbon

Technical Procedure for Glass Refractive Index Measurement System 3 (GRIM 3)

MAINTENANCE EVALUATION CHECKLIST HYDRAULIC ELEVATORS

HAZARD COMMUNICATION PROGRAM PREPARED BY ENVIRONMENTAL HEALTH AND SAFETY OFFICE

Innovation in. Motionless Mixers

1. DEFINITIONS. B. BTUH Hourly Rate of change in Mass Heat BTUH = * CFM * ΔT (Air Heat Transfer) BTUH = 500 * GPM * ΔT (Water Heat Transfer)

Development of an organometallic flow chemistry. reaction at pilot plant scale for the manufacture of

Facilities Management

Food Safety Management System

X Series 2 Continuous

Food Safety and Quality Management System

PFI Closed circuit cooling towers

Ti-Pure TITANIUM DIOXIDE. DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF RPS ( Horiba (LA-900) Procedure) METHOD: T WP

NaturalFacts. Introducing our team. New product announcements, specials and information from New Roots Herbal. April 2009

Blue Marble University

data sheet DONATELLO FAST General characteristics Rev. First emission - 01/07/ PRO02 code

Lecture 25: Manufacture of Maleic Anhydride and DDT

On-line XRF analysis of multiple elements in liquid process streams C-QUAND

Thermochemistry/Calorimetry. Determination of the enthalpy of vaporization of liquids LEC 02. What you need: What you can learn about

C h a p t e r 5 : W o r k p l a c e H a z a r d o u s M a t e r i a l s I n f o r m a t i o n S y s t e m ( W H M I S )

4 Materials and methods

Guidance Document Regarding Acceptors under ATF Regulations at 27 CFR October 2017

Cryo Mezzanine Design and Requirements. David Montanari, Aurélien Diaz, Kevin Haaf LBNF Cryostat, final design review SURF, August 2017

COURSE MODULES LEVEL1.1

ABSTRACT. Many similar problems will come to mind, often associated with design

FIRE DEPARMENT SANTA CLARA COUNTY

Methods for High Pressure VLE Measurement

WHY DO WE NEED MODEL MAINTENANCE?

Module No. # 03 Lecture No. # 11 Probabilistic risk analysis

NATIONAL CERTIFICATE (VOCATIONAL) APPLIED ENGINEERING TECHNOLOGY NQF LEVEL 4 NOVEMBER 2009

DEVELOPMENT OF NUCLEAR-SPECIFIC CORIOLIS FLOWMETERS BASED ON THE STRAIGHT-TUBE TECHNOLOGY

Hazard Communications

Stat664 Homework #3 due April 21 Turn in problems marked with

Unit I Unit Operations

Training program for x-ray inspection film (RT)

ELISA CHECK. Application. Introduction. Test principle. ELISA microplate reader accuracy. ELISA microplate linearity

Kjeltec 2300 Analyzer Unit

Continuous Flow Reactions. From idea to production size scale up in 3 steps

Automated Thunderstorm Alert Service (ATSAS) User Guide

Industrial Applications of Microreactor Technology

Overview of Control System Design


NZQA unit standard New US6 to replace and version 1 Page 1 of 5

University of Waterloo Library

RHS 980C. Operation Manual

Operating instructions Magnetic-inductive flow meter SM6x04 SM7x04 SM8x04

Alternating Current (AC): Alternating Current is electric current that reverses directions at regular intervals.

Quarries National Joint Advisory Committee (QNJAC) Occupational Health. Information Sheet 10. April Management of Asbestos on Site

Chemistry Stage 6 Syllabus

WYANDOTTE MUNICIPAL SERVICES COMMUNITY WIND ENERGY PROJECT WIND RESOUCE SUMMARY

New Way Porous Gas Bearings as Seals. Bearings Seals

ISM Individual Spindle Monitoring. Online monitoring at every spindle

HACCP Concept. Overview of HACCP Principles. HACCP Principles. Preliminary Tasks Development of the HACCP Plan

Automated multi-vapor gravimetric sorption analyzer for advanced research applications

Exergetic sustainability assessment of batch versus continuous manufacturing Lessons learned in primary and secondary pharmaceutical manufacturing

Overview of Control System Design

Evaluating the Safety of Digital Instrumentation and Control Systems in Nuclear Power Plants

Story of success FEB 2018

HAZARD COMMUNICATION PROGRAM

Hazard Communication Policy

Facing the winter challenges for railways in Europe - Winter & Railways Fact Sheet Root Causes Rolling Stock and Infrastructure UIC Survey Evaluation

Overview of HACCP Principles. OFFICE OF THE TEXAS STATE CHEMIST Texas Feed and Fertilizer Control Service Agriculture Analytical Service

Real-Time Optimization (RTO)

Mercury Stack Monitor SM-4

Basic Hazard Communication

Transcription:

International Labour Organization Organisation internationale du Travail Organización Internacional del Trabajo Updating the International Standard Classification of Occupations (ISCO) Draft ISCO-08 Group Definitions: Occupations in Chemicals POLICY INTEGRATION DEPARTMENT BUREAU OF STATISTICS

ISCO-08 Draft Definitions - Chemicals ISCO 08 Code 3133 Chemical processing plant controllers Chemical processing plant controllers operate and monitor chemical plants and adjust and maintain, processing units and equipment which distil, filter, separate, heat or refine chemicals. (a) operating electronic or computerized control panel from a central control room to monitor and optimize physical and chemical processes for several processing units; (b) adjusting equipment, valves, pumps, controls and process equipment; (c) controlling the preparation, measuring and feeding of raw materials and processing agents such as catalysts and filtering media into plant; (d) controlling process start-up and shut-down, troubleshooting and monitoring outside process equipment; (e) verifying equipment for malfunctions, carrying out routine operating tests and arranging for maintenance; (f) analyzing sample products, performing tests, recording data and writing production logs; (g) supervising other workers Examples of the occupations classified here: - Chemical-heat-treating-plant operator - Chemical-filtering and separating equipment operator - Chemical-still and reactor operator - Chemical process technician Petroleum and natural gas refining plant operators - 3134 Chemical products plant and machine operators - 8131

813 Chemical and photographic products plant and machine operators Chemical and photographic products plant and machine operators operate and monitor machines which process a variety of chemicals and other ingredients to produce pharmaceuticals, toiletries, explosives and photographic or other chemical products. Tasks performed usually include: operating and monitoring machines and equipment which blend, mix, package and otherwise process chemicals and chemical products to give them the desired properties for further industrial production, or to make finished products. Supervision of other workers may be included. Occupations in this minor group are classified into the following unit groups: Chemical products plant and machine operators - 8131 Photographic products machine operators - 8132 Chemical processing plant controllers - 3133 Petroleum and natural gas refining plant operators - 3134

8131 Chemical products plant and machine operators Chemical products plant and machine operators monitor and operate units and machinery to blend, mix, process and package a wide range of chemical products. - Setting up, starting, controlling, adjusting and stopping machines and plant; - Monitoring reaction processes and transfers of products in conformance with safety procedures; - Monitoring meters, gauges and electronic instrumentation on one or more chemical or formulation units, such as mixers, kettles, blenders, dryers, tabletting, encapsulation, granulation and coating machines; - Measuring, weighing and loading chemical ingredients following formulation cards; - Taking samples and performing routine chemical and physical tests of products and recording production data; - Cleaning and performing minor repairs to machines and plant. Examples of the occupations classified here: - Operator, blender/petroleum and natural gas refining (ethyl) - Machine operator, still/petroleum and natural gas refining - Pharmaceutical and toiletry products machine operators. - Machine operator, candle production. - Machine operator, explosive products. Chemical processing plant controllers - 3133 Petroleum and natural gas refining plant operators - 3134

8132 Photographic products machine operators Photographic-products machine operators operate and monitor equipment which makes photographic film and paper, and which processes exposed photographic film and makes prints. (a) operating and monitoring equipment which makes photographic film and paper; (b) operating, monitoring and testing photographic processing and printing equipment, and maintaining operational standards (c) preparing exposed film for different processing batches in dark rooms and dark chambers; (d) inspecting images, films, prints and adjusting settings on print-making equipment to produce required colour, brightness, contrast, number, size and type of prints (e) adjusting settings and running automatic developing equipment (f) operating equipment to transfer film to video tape or other electronic media; (g) performing photographic processing related tasks; (h) supervising other workers. (i) operating automatic equipment (in retail establishments) to develop colour negatives, prints and slides. Examples of occupations classified here: - Darkroom technician - Photographic processor - Photographic film printer - Developing machine-operator - photography - Enlarging machine-operator- photography - Machine-operator, photographic-film - Machine-operator, printing/photography (colour) - Developer, film/colour - Enlarger, photograph - Printer, photograph - Photographers - 3431

3134 Petroleum and natural gas refining plant operators Petroleum and natural gas refining plant operators operate and monitor plants and adjust and maintain processing units and equipment which refine, distil and treat petroleum, petroleum-based products and by-products, or natural gas. (a) operating electronic or computerized control panel from a central control room to monitor and optimize physical and chemical processes for several processing units; (b) adjusting equipment, valves, pumps, controls and process equipment; (c) controlling process start-up and shut-down, troubleshooting and monitoring outside process equipment; (d) verifying equipment for malfunctions, testing well pipes for leaks and fractures and arranging for maintenance; (e) analyzing sample products, performing tests, recording data and writing production logs; (f) supervising other workers. Examples of the occupations classified here: - Operator, blender/petroleum and natural gas refining (ethyl) - Operator, paraffin plant - Operator, still/petroleum and natural gas refining - Refinery process technician - Petroleum process operator - Gas plant operator Chemical processing plant controllers - 3133 Chemical products plant and machine operators - 8131 Operators monitor refining process through computerized multi-function process control units.