ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8-0 Fax +9 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA 590 General partner Elektrobau Mulfingen GmbH Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRB 590 Nominal data Type Motor WE-AA09-5 ME05-BF Phase ~ ~ Nominal voltage VAC Frequency Hz Method of obtaining data fa fa Valid for approval/standard CE CE Speed min - 800 00 Power consumption W 6 Current draw A 0. 0. Capacitor µf 0.75 0.75 Capacitor voltage VDB 00 00 Capacitor standard P0 (CE) P0 (CE) Min. ambient temperature C -5-5 Max. ambient temperature C 70 70 ml = Max. load me = Max. efficiency fa = Free air cs = Customer specification ce = Customer equipment Subject to change Item no. 59-5-9980 ENU Change 7795 Approved 05-0- Page / 5
Technical description Weight Fan size Rotor surface Blade material Housing material Number of blades 5 Airflow direction Direction of rotation Degree of protection Insulation class Max. permitted ambient temp. for motor (transport/storage) Min. permitted ambient temp. for motor (transport/storage) Installation position Condensation drainage holes Motor storage Touch current according to IEC 990 (measuring circuit Fig., TN system) Electrical hookup Motor protection Protection class Motor capacitor according to EN 5- in safety protection class Conformity with standards Approval.0 kg mm Rotor open, painted black Sheet steel, painted black Die-cast aluminum, painted black "V" Counterclockwise, viewed toward rotor IP0 "B" + 80 C - 0 C Any None, open rotor Ball bearing < 0.75 ma With plug Thermal overload protector (TOP) externally wired I (with customer connection of protective earth) P0/S0 EN 5-; CE VDE Item no. 59-5-9980 ENU Change 7795 Approved 05-0- Page / 5
Product drawing Direction of air flow "V" x flat plugs.8 x 0.5 mm Cable AWG (TOP), x crimped flat push-on receptacle G+H 6..0, with insulating sleeve.8 SES no. 05- Connection diagram L blue N black TOP x white Item no. 59-5-9980 ENU Change 7795 Approved 05-0- Page / 5
Curves: Air performance Hz Pfs Pa 80 0 0 0.05 0. 0.5 0. 0.5 0. in wg 0 0 80 0 00 00 00 00 cfm m³/h ρ =,5 kg/m³ ± % Measurement: LU-667 Air performance measured according to ISO 580 installation category A. For detailed information on the measurement setup, contact ebm-papst. Intake sound level: Sound power level according to ISO 7 / sound pressure level measured at m distance from fan axis. The values given are valid under the specified measuring conditions and may vary due to conditions of installation. For deviations from the standard configuration, the parameters have to be checked on the installed unit. Measured values U f n P e I p fs V Hz min - W A m /h Pa 800 0. 70 0 80 5 0. 5 5 85 5 0. 85 80 6 0. 70 U = Power supply f = Frequency n = Speed P e = Power consumption I = Current draw = Air flow p fs = Pressure increase Item no. 59-5-9980 ENU Change 7795 Approved 05-0- Page / 5
Curves: Air performance Hz Pfs Pa 80 0 0 0. 0. 0. in wg 0 00 00 00 00 00 00 cfm m³/h ρ =,5 kg/m³ ± % Measurement: LU-668 Air performance measured according to ISO 580 installation category A. For detailed information on the measurement setup, contact ebm-papst. Intake sound level: Sound power level according to ISO 7 / sound pressure level measured at m distance from fan axis. The values given are valid under the specified measuring conditions and may vary due to conditions of installation. For deviations from the standard configuration, the parameters have to be checked on the installed unit. Measured values U f n P e I p fs V Hz min - W A m /h Pa 00 6 0. 0 0 8 0. 05 0 0 9 0. 80 0 0. 80 90 U = Power supply f = Frequency n = Speed P e = Power consumption I = Current draw = Air flow p fs = Pressure increase Item no. 59-5-9980 ENU Change 7795 Approved 05-0- Page 5 / 5