Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum board space, reflow solderable High CV per unit volume Long useful life: 000 h to 3000 h at 05 C Charge and discharge proof, no peak current limitation Supplied in blister tape on reel Lead (Pb)-free ATTENTION: for maximum safe soldering conditions refer to fig.4 53 CRV QUICK REFERENCE DATA DESCRIPTION Lead (Pb)-free Nominal case sizes (L x W x H in mm) VALUE 4.0 x 4.0 x 5.3 to 0 x 0 x 4 Rated capacitance range, C R 0.47 µf to 000 µf Tolerance on C R ± 0 % Rated voltage range, U R 6.3 V to 00 V Category temperature range - 55 C to + 05 C Endurance test at 05 C: 53 CLV 50 CLZ 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 000 h 8.0 x 8.0 x 6.5 to 0 x 0 x 4 000 h Useful life at 05 C: 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 000 h 8.0 x 8.0 x 6.5 to 0 x 0 x 4 3000 h Useful life at 40 C;.3 x l R applied: 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 00 000 h 8.0 x 8.0 x 6.5 to 0 x 0 x 4 300 000 h Shelf life at 0 V, 05 C 000 h IEC 60384-8/ Based on sectional specification CECC 3300 Climatic category IEC 60068 55/05/56 APPLICATIONS SMD technology, for high mounting density Coupling, decoupling, smoothing, filtering, buffering, timing Telecommunications, general industrial, EDP, automotive, portable and lightweight equipment MARKING Rated capacitance (in µf) Rated voltage (in V) Date code, in accordance with IEC 60 06 Black mark or sign indicating the cathode (the anode is identified by bevelled edges) Code indicating group number (V) PACKAGING Supplied in blister tape on reel Document Number: 830 For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: 0-Oct-7 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
53 CLV Not for New Designs - Alternative Device: 53 CRV SELECTION CHART FOR C R, U R AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) C R (µf) U R (V) 6.3 0 6 5 35 50 63 00 0.47 - - - - - 4.0 x 4.0 x 5.3 - -.0 - - - - - 4.0 x 4.0 x 5.3 - -. - - - - - 4.0 x 4.0 x 5.3 - - 3.3 - - - - - 4.0 x 4.0 x 5.3 - - 4.7 - - - - 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 - - 0 - - 4.0 x 4.0 x 5.3-5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 - - 4.0 x 4.0 x 5.3-5.0 x 5.0 x 5.3-6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 - - 33-5.0 x 5.0 x 5.3-6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 0-0 x 0 x 4 47 5.0 x 5.0 x 5.3-6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5-8.0 x 8.0 x 0 - - 00 6.3 x 6.3 x 5.3-8.0 x 8.0 x 6.5 8.0 x 8.0 x 0-0 x 0 x 0 0 x 0 x 4 - - - - - - - - - 0-8.0 x 8.0 x 0 0 x 0 x 0 - - - - - 330 8.0 x 8.0 x 0 0 x 0 x 0-0 x 0 x 4 - - - - 470 0 x 0 x 0-0 x 0 x 4 - - - - - 680-0 x 0 x 4 - - - - - - 000 0 x 0 x 4 - - - - - - - Table TAPE AND REEL DIMENSIONS in millimeters AND PACKAGING QUANTITIES CASE CODE PITCH P Note Detailed tape dimensions see section PACKAGING. TAPE WIDTH W TAPE THICKNESS T REEL DIA. PACKAGING QUANTITY PER REEL 0405 8 5.8 380 000 0505 5.8 380 000 0605 6 5.8 380 000 0807 6 6.8 380 000 080 6 4.3 380 500 00 6 4.3 380 500 04 6 4 4.8 330 50 www.vishay.com For technical questions, contact: aluminumcaps@vishay.com Document Number: 830 Revision: 0-Oct-7 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Not for New Designs - Alternative Device: 53 CRV 53 CLV Table DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE L x W x H CASE CODE L max. W max. H max. Ø D B max. S C 4.0 x 4.0 x 5.3 0405 4.5 4.5 5.5 4.0 0.8.0.0 ± 0. 0.3 5.0 x 5.0 x 5.3 0505 5.5 5.5 5.5 5.0 0.8.4.3 ± 0. 0.0 6.3 x 6.3 x 5.3 0605 6.8 6.8 5.5 6.3 0.8.0.7 ± 0. 0.30 8.0 x 8.0 x 6.5 0807 8.6 8.6 6.8 8.0 0.8.3 3.4 ± 0. 0.50 8.0 x 8.0 x 0 080 8.6 8.6 0.5 8.0. 3. 3.0 ± 0..00 0 x 0 x 0 00 0.6 0.6 0.5 0.0. 4.7 3.3 ± 0..30 0 x 0 x 4 04 0.6 0.6 4.3 0.0. 4.5 3.9 ± 0..50 MASS (g) 0.4 ± 0. L W B MOUNTING The capacitors are designed for automatic placement on to printed-circuit boards. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and/or adjacent components. For recommended soldering pad dimensions, refer to Fig.3 and Table 3. SOLDERING Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the soldering pad during processing. For maximum conditions refer to Fig.4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. C S C 0.3 max. Fig. Dimensional outline Fig.3 Recommended solder pad dimensions AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM CURVES SHOULD NEVER BE EXCEEDED. Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c 0405.6.6.0 0505 3.0.6.4 0605 3.5.6.9 0807 4.0.6. 080 3.5.5 3.0 00 4.0.5 4.0 04 4.3.5 4.0 T 80 PAD ( C) 60 40 0 00 80 60 40 0 00 80 0 50 00 50 00 t (s) 50 Fig.4 Maximum temperature load during infrared reflow soldering measured on the soldering pad Document Number: 830 For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: 0-Oct-7 3 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
53 CLV Not for New Designs - Alternative Device: 53 CRV ELECTRICAL DATA SYMBOL DESCRIPTION C R rated capacitance at 00 Hz or 0 Hz, tolerance ± 0 % I R rated RMS ripple current at 00 Hz or 0 Hz, 05 C I L max. leakage current after minutes at U R tan max. dissipation factor at 00 or 0 Hz ESR equivalent series resistance at 00 khz Note Unless otherwise specified, all electrical values in Table 4 apply at T amb = 0 C, P = 86 kpa to 06 kpa, RH = 45 % to 75 %. ORDERING EXAMPLE Electrolytic capacitor 53 series 00 µf/5 V; ± 0 % Nominal case size: 8 mm x 8 mm x 0 mm; taped on reel Ordering code: MAL53660E3 Former NC: 53 660 Table 4 ELECTRICAL DATA AND ORDERING INFORMATION U R (V) C R (µf) NOMINAL CASE SIZE L x W x H (mm) I R 05 C (ma) I L min (µa) tan ESR 00 khz ( ) ORDERING CODE MAL53... 4.0 x 4.0 x 5.3 3.0 0.30 8 639E3 47 5.0 x 5.0 x 5.3 36 3.0 0.30 4 63479E3 6.3 00 6.3 x 6.3 x 5.3 6 6.3 0.30 630E3 330 8.0 x 8.0 x 0 80 0.30 0.5 6333E3 470 0 x 0 x 0 30 30 0.30 0.3 6347E3 000 0 x 0 x 4 400 63 0.4 0.4 630E3 33 5.0 x 5.0 x 5.3 3 3.3 0.6 4 64339E3 0 0 8.0 x 8.0 x 0 80 0.6 0.5 64E3 330 0 x 0 x 0 30 33 0.6 0.3 6433E3 680 0 x 0 x 4 380 68 0.9 0.4 6468E3 0 4.0 x 4.0 x 5.3 6 3.0 0. 8 6509E3 5.0 x 5.0 x 5.3 8 3.5 0. 4 659E3 6 47 6.3 x 6.3 x 5.3 47 7.5 0.. 65479E3 00 8.0 x 8.0 x 6.5 0 6 0.. 650E3 0 0 x 0 x 0 30 35 0. 0.3 65E3 470 0 x 0 x 4 370 75 0.6 0.5 6547E3 33 6.3 x 6.3 x 5.3 44 8.3 0.6. 66339E3 5 47 8.0 x 8.0 x 6.5 0 0.6. 66479E3 00 8.0 x 8.0 x 0 80 5 0.6 0.5 660E3 330 0 x 0 x 4 300 83 0.4 0.7 6633E3 4.7 4.0 x 4.0 x 5.3 4 3.0 0.3 8 60478E3 35 0 5.0 x 5.0 x 5.3 3 3.5 0.3 4 6009E3 6.3 x 6.3 x 5.3 50 7.7 0.3. 609E3 33 8.0 x 8.0 x 6.5 0 0.3. 60339E3 0.47 4.0 x 4.0 x 5.3 5 3.0 0. 6477E3.0 4.0 x 4.0 x 5.3 7 3.0 0. 608E3. 4.0 x 4.0 x 5.3 0 3.0 0. 68E3 3.3 4.0 x 4.0 x 5.3 3.0 0. 6338E3 50 4.7 5.0 x 5.0 x 5.3 7 3.0 0. 6 6478E3 0 6.3 x 6.3 x 5.3 6 5.0 0. 3 609E3 8.0 x 8.0 x 6.5 0 0.. 69E3 33 8.0 x 8.0 x 0 80 7 0. 0.5 6339E3 47 8.0 x 8.0 x 0 80 4 0. 0.5 6479E3 00 0 x 0 x 0 30 50 0. 0.3 60E3 63 00 0 x 0 x 4 40 63 0.09 0.4 680E3 00 33 0 x 0 x 4 70 33 0.07 0.65 69339E3 www.vishay.com For technical questions, contact: aluminumcaps@vishay.com Document Number: 830 4 Revision: 0-Oct-7 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Not for New Designs - Alternative Device: 53 CRV 53 CLV ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage IEC 60384-8, subclause 4.4 U s.5 x U R Reverse voltage IEC 60384-8, subclause 4.6 U rev V Current Leakage current after min at U R I L 0.0 x C R x U R or 3 µa, whichever is greater Inductance Equivalent series inductance (ESL) case codes 0405 to 0605 typ. 0 nh case codes 0807 to 00 typ. 5 nh case codes 04 typ. 6 nh CAPACITANCE (C) C C 0..0 EQUIVALENT SERIES RESISTANCE (ESR) 0 ESR (Ω) 0 0.9 0.8 Curve : µf, 50 V Curve : 00 µf, 6.3 V Curve : µf, 6.3 V Curve : µf, 6 V Curve 3: µf, 5 V 3 0.7-40 - 0 0 0 40 60 80 00 0 C 0 = Capacitance at 0 C T amb ( C) Fig.5 Typical multiplier of capacitance at 00 Hz or 0 Hz as a function of ambient temperature 0. 0. 0 0 0 3 Fig.6 Typical ESR as a function of frequency at 0 C f (khz) DISSIPATION FACTOR (tan δ) 0 tan δ 0. 0.0 Curve : µf, 50 V Curve : 00 µf, 6.3 V IMPEDANCE (Z) 0 Z (Ω) 0 Curve : µf, 6.3 V Curve : µf, 6 V Curve 3: µf, 5 V 3 - - 60-40 - 0 0 0 40 60 80 00 0 T amb ( C) Fig.7 Typical dissipation factor (tan δ) at 00 Hz or 0 Hz as a function of ambient temperature 0. 0. 0 0 0 3 f (khz) Fig.8 Typical impedance as a function of frequency at 0 C Document Number: 830 For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: 0-Oct-7 5 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
53 CLV RIPPLE CURRENT AND USEFUL LIFE Not for New Designs - Alternative Device: 53 CRV 3.8 CCC06 I A I R 3.7 3.6 3.5 3.4 3.3 3. 3. 3.0.8.6 lifetime multiplier.4.0..0.5.0 3.0 4.0 I A = actual ripple current at 00 Hz or 0 Hz I R = rated ripple current at 00 Hz or 0 Hz at 05 C For case codes 0405 to 00 max. I A /I R =.4 () Useful life at 05 C and I R applied: case codes 0405 to 0605: 000 h case codes 0807 to 04: 3000 h.8.6.4. ().0 0.8 0.5 0.0 40 50 60 70 80 90 00 0 T amb ( C) 50 00 60 00 0 30 8.0 6.0 Fig.9 Multiplier of useful life as a function of ambient temperature and ripple current load Table 5 MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY FREQUENCY I R MULTIPLIER (Hz) U R = 6.3 V to 6 V U R = 5 V or 35 V U R = 50 V to 00 V 50 or 60 0.80 0.80 0.80 00 or 0.00.00.00 300.0.5.0 000.5.5.35 3000.0.35.45 0 000.5.40.50 www.vishay.com For technical questions, contact: aluminumcaps@vishay.com Document Number: 830 6 Revision: 0-Oct-7 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Not for New Designs - Alternative Device: 53 CRV 53 CLV Table 6 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Mounting Endurance REFERENCE IEC 60 384-8, subclause 4.3 IEC 60 384-8/ CECC 3 300, subclause 4.5 Useful life CECC 30 30, subclause.8. PROCEDURE (quick reference) shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter Mounting T amb = 05 C; U R applied; 000 h, case codes 0405 to 0605 000 h, case codes 0807 to 04 T amb = 05 C; U R and I R applied; 000 h, case codes 0405 to 0605 3000 h, case codes 0807 to 04 REQUIREMENTS C/C: ± 0 % tan spec. limit I L spec. limit C/C: ± 0 % tan x spec. limit I L spec. limit C/C: ± 50 % tan 3 x spec. limit I L spec. limit no short or open circuit total failure percentage: % Shelf life (storage at high temperature) IEC 60 384-8/ CECC 3 300, subclause 4.7 T amb = 05 C; no voltage applied; 000 h after test: U R to be applied for 30 min, 4 h to 48 h before measurement for requirements see Endurance test above Document Number: 830 For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: 0-Oct-7 7 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
www.vishay.com Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 07 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000