216-9-27 Infrared Emitter (85 nm) Version 1.3 SFH 4855 Features: Wavelength 85nm Hermetically sealed package Short switching times Spectral match with silicon photodetectors Applications Photointerrupters Sensor technology Light curtains Notes Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 6825-1 and IEC 62471. Ordering Information Type: Radiant Intensity Ordering Code I e [mw/sr] I F = 1 ma, t p = 2 ms SFH 4855 11 ( 4) Q65111A6128 SFH 4855-VAW 63... 2 Q65111A9675 Note: Measured at a solid angle of Ω =.1 sr 216-9-27 1
Maximum Ratings (T A = 25 C) Parameter Symbol Values Unit Operation and storage temperature range T op ; T stg -4... 125 C Reverse voltage V R 5 V Forward current I F 1 ma Surge current (t p 2 µs, D = ) Characteristics (T A = 25 C) I FSM 1 A Power consumption P tot 2 mw Thermal resistance junction - ambient R thja 5 K / W Thermal resistance junction - case R thjc 35 K / W ESD withstand voltage (acc. to ANSI/ ESDA/ JEDEC JS-1 - HBM) V ESD 2 kv Parameter Symbol Values Unit Peak wavelength (I F = 1 ma, t p = 2 ms) Centroid wavelength (I F = 1 ma, t p = 2 ms) Spectral bandwidth at 5% of I max (I F = 1 ma, t p = 2 ms) (typ) λ peak 86 nm (typ) λ centroid 85 nm (typ) λ 3 nm Half angle (typ) ϕ ± 8 Dimensions of active chip area (typ) L x W.3 x.3 mm x mm Distance chip surface to lens top (min.. max) Rise and fall time of I e ( 1% and 9% of I e max ) (I F = 1 ma, R L = 5 Ω) Forward voltage (I F = 1 ma, t p = 2 ms) Forward voltage (I F = 1A, t p = 1 µs) Reverse current (V R = 5 V) Total radiant flux (I F =1 ma, t p =2 ms) H 4... 4.8 mm (typ) t r, t f 12 ns (typ (max)) V F 1.7 ( 2) V (typ (max)) V F 3.6 ( 4.6) V I R not designed for reverse operation µa (typ) Φ e 35 mw 216-9-27 2
Parameter Symbol Values Unit Temperature coefficient of I e or Φ e (I F = 1 ma, t p = 2 ms) Temperature coefficient of V F (I F = 1 ma, t p = 2 ms) Temperature coefficient of wavelength (I F = 1 ma, t p = 2 ms) Grouping (T A = 25 C) (typ) TC I -.3 % / K (typ) TC V -.6 mv / K (typ) TC λ.3 nm / K Group Min Radiant Intensity Max Radiant Intensity Typ Radiant Intensity I F = 1 ma, t p = 2 ms I F = 1 ma, t p = 2 ms I F = 1 A, t p = 1 µs I e, min [mw / sr] I e, max [mw / sr] I e, typ [mw / sr] SFH 4855-U 4 8 25 SFH 4855-V 63 125 4 SFH 4855-AW 1 2 63 SFH 4855-BW 16 32 98 Note: measured at a solid angle of Ω =.1 sr Only one group in one packing unit (variation lower 2:1). 216-9-27 3
Relative Spectral Emission I rel = f(λ), T A = 25 C 1 I rel % 8 1) page 9 OHF4132 1) page 9 Radiant Intensity I e / I e (1 ma) = f(i F ), single pulse, t p = 1 µs, T A = 25 C Ι e 1 1 Ι e (1 ma) OHF5641 1 6 4 1-1 2 1-2 7 75 8 85 Max. Permissible Forward Current I F, max = f(t A ), R thja = 5 K / W I F 11 ma nm λ OHF568 95 1-3 1 1 1 1 2 ma 1) page 9 Forward Current I F = f(v F ), single pulse, t p = 1 µs, T A = 25 C I F 1 ma 3 I F OHF5645 3 1 9 8 7 6 2 1 5 5 4 3 2 1 1 5 1 25 5 75 1 C 125 T A 1 1 2 3 V 4 V F 216-9-27 4
Permissible Pulse Handling Capability I F = f(t p ), T A = 25 C, duty cycle D = parameter OHF5681 1.1 t A P I t F D P = IF T T.9.8.7.6.5.4.3.2.1 1-5 -4 1 1-3 -2 1 1-1 D =.5.1.2.5.1.2.5 1 t p 1 1 1 s 1 2 Permissible Pulse Handling Capability I F = f(t p ), T A = 85 C, duty cycle D = parameter OHF5682 1.1 t A P I t F D P = IF T T.9.8.7.6.5.4.3.2.1 1-5 -4 1 1-3 -2 1 1 D =.5.1.2.5.1.2.5 1-1 t p 1 1 1 s 1 2 Radiation Characteristics I rel = f(ϕ), T A = 25 C 4 3 1) page 9 2 1 OHF5678 ϕ 1. 5.8 6.6 7.4 8.2 9 1 1..8.6.4 2 4 6 8 1 12 216-9-27 5
Package Outline Dimensions in mm. Pinning Pin Description 1 Cathode 2 Anode Package Metal Can (TO-18), hermetically sealed Approximate Weight:.4 g 216-9-27 6
Recommended Solder Pad Dimensions in mm. Note: pad 1: cathode TTW Soldering IEC-6176-1 TTW 3 C T 25 2 15 1 235 C - 26 C First wave Preheating 13 C 12 C 1 C 1 s max., max. contact time 5 s per wave T < 15 K Second wave Typical OHA4645 Continuous line: typical process Dotted line: process limits Cooling ca. 3.5 K/s typical ca. 2 K/s ca. 5 K/s 5 2 4 6 8 1 12 14 16 18 2 22 s 24 t 216-9-27 7
Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 216-9-27 8
Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 216-9-27 9
Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-9355 Regensburg www.osram-os.com All Rights Reserved. 216-9-27 1