0/0 PLL-SI PUL-SI smaller dimensions 0/0 PLL-SI QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance range (E series), to 000 µf Tolerance on ± 0 % Rated voltage range, U R 0 to 00 V 00 to 00 V Category temperature range - 0 to + 0 C - to 0 C Endurance test at 0 C Useful life at 0 C Fig. Component outlines C Useful life at 0 C,. x applied Shelf life at 0 V, 0 C Based on sectional specification 0/0 PSM-SI 0 V: 000 hours; V: 000 hours 0 V: 000 hours; V: 0 000 hours 0 V: 000 hours; V: 0 000 hours 00 hours IEC 0-/EN000 Climatic category IEC 00 0/0/ /0/ FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve Very long useful life: up to 0 000 hours at 0 C Extended temperature range: 0 C Low, high ripple current capability Keyed polarity version available APPLICATIONS Computer, telecommunication and industrial systems Smoothing and filtering applications Standard and switched mode power supplies Energy storage in pulse systems MARKING RoHS COMPLIANT The capacitors are marked (where possible) with the following information: Rated capacitance (in µf) Tolerance code on rated capacitance, code letter in accordance with IEC 00 (M for ± 0 %) Rated voltage (in V) Date code (YYMM) Name of manufacturer Code for factory of origin sign to identify the negative terminal, visible from the top and side of the capacitor Code number Climatic category in accordance with IEC 00 SELECTION CHART FOR, U R AND RELEVANT NOMINAL CASE SIES FOR 0 SERIES (Ø D x L in mm) U R (V) 0 0 0 00 0 - - - - - - x 0 - - - - - - x 0 0 000 00 - - - - - x x 0 - - - - - - x 0 - - - - x x 0 0 x 0 - - - - - - x 0 - - - x x 0 x 0 0 x 0 - - - - - x 0 x 0 Document Number: For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: -Aug-0
0/0 PLL-SI SELECTION CHART FOR, U R AND RELEVANT NOMINAL CASE SIES FOR 0 SERIES (Ø D x L in mm) 00 00 00 00 0 000 000 000 U R (V) 0 0 0 00 - - x x 0 x 0 0 x 0 x 0 - - - - x 0 x 0 0 x 0 - x x 0 x 0 0 x 0 0 x 0 x 0 - - - x 0 x 0 x 0 - x x 0 x 0 0 x 0 0 x 0 x 0 - - - x 0 x 0 x 0 0 x 0 - x 0 x 0 0 x 0 0 x 0 x 0 x 0 - - x 0 x 0 x 0 0 x 0 - - x 0 0 x 0 0 x 0 x 0 x 0 - - x 0 x 0 x 0 0 x 0 - - - 0 x 0 0 x 0 x 0 x 0 - - - x 0 x 0 0 x 0 - - - - 0 x 0 x 0 x 0 - - - - x 0 0 x 0 - - - - - x 0 x 0 - - - - - 000 0 x 0 - - - - - - 000 x 0 - - - - - - SELECTION CHART FOR, U R AND RELEVANT NOMINAL CASE SIES FOR 0 SERIES (Ø D x L in mm) U R (V) 00 0 00 - - x - - - x 0 x 0 00 0 0 0 0 - x x x - - x 0 x 0 x x 0 0 x 0 0 x 0 - - x 0 x 0 x 0 x x 0 0 x - x 0 0 x 0 x 0 x 0 x 0 x 0 x 0 x 0 x 0 x 0 0 x 0 0 x 0 0 x x 0 x 0 x 0 x 0 - - 0 x x - - x 0 0 x - - x x - - 0 0 x - - - 000 x 0 - - - www.vishay.com For technical questions, contact: aluminumcaps@vishay.com Document Number: Revision: -Aug-0
0/0 PLL-SI DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN Ø D + TERMINAL - TERMINAL L L + max. 0 ± 0. Bottom view + 0. - mm The minus terminal can be marked with a black dot or with an imprinted sign. Fig. Two terminal snap-in Ø ± 0. ( x) Fig. Mounting hole diagram THREE TERMINAL SNAP-IN Ø D Ø. ± 0. Ø ± 0. ( x) + TERMINAL - TERMINAL L L + max.. ± 0. 0 ± 0. minus pole marking Bottom view The negative terminal has TWO pins which are BOTH electrically connected. Fig. Three terminal snap-in ± 0.. ± 0. The 0 mm spacing of the pin snap-in is used as the base layout and a third hole is added. The third hole is closer to the negative primary hole so that polarization is always maintained, together with added mechanical stability. Fig. Mounting hole diagram Table DIMENSIONS IN MILLIMETERS, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIE Ø D x L Ø D max. L max. MASS (g) PACKAGING QUANTITIES (units per box) CARDBOARD BOX DIMENSIONS L x W x H x 00 0 x 0 x x 0 00 0 x 0 x x 0 00 0 x 0 x x 0 00 0 x 0 x x 0 00 0 x 0 x x 00 0 x 0 x x 0 00 0 x 0 x x 0 00 0 x 0 x 0 x 0 0 00 0 x 0 x 0 x 00 0 x 0 x 0 x 0 0 00 0 x 0 x 0 x 00 0 x 0 x 0 x 0 0 00 0 x 0 x x 0 0 x x x 0 0 0 x x x 0 0 x x x 0 0 0 x x Document Number: For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: -Aug-0
0/0 PLL-SI ELECTRICAL DATA SYMBOL I L I L Note Unless otherwise specified, all electrical values in Tables and apply at T amb =0 C, P = to 0 kpa, RH = to % Table DESCRIPTION rated capacitance at 00 Hz rated RMS ripple current at 00 Hz or 0 khz and 0 C max. leakage current after minute at U R max. leakage current after minutes at U R max. equivalent series resistance at 00 Hz max. impedance at 0 khz ORDERING EXAMPLE Electrolytic capacitor 0 series 0 000 µf/ V; ± 0 % Nominal case size: Ø 0 x 0 mm -terminal snap-in Ordering code: MAL00E Former NC: 00 -terminal snap-in Ordering code: MAL00E Former NC: 00 ELECTRICAL DATA AND ORDERING INFORMATION FOR 0 SERIES (Ø D x L in mm) U R (V) 0 0 00 Hz NOMINAL CASE SIE Ø D x L (mm) 00 Hz 0 C (A) 0 khz 0 C (A) I L min I L min 00 Hz 0 Hz ORDERING CODE MAL0... -TERM. -TERM. 00 x..0 E E 00 x 0.. 0 E E 0 000 x 0.. 0 0 0E 0E 0 000 x 0.. 0 0 0E 0E 000 0 x 0.. 0 0 E E 000 x 0.. 0 0 0 E E 000 0 x 0.. E E 000 x 0.. E E 000 x 0..0 0 E E 000 0 x 0.0. E E 000 x 0.. E E 00 x.0. 0 E E 00 x 0.. E E 00 x 0.. E E 00 x 0.. E E 0 000 0 x 0..0 0E 0E 0 000 x 0.. 0 0 0E 0E 000 0 x 0.. E E 000 x 0.. E E 000 x 0.0. 0 E E 000 0 x 0.. 0 E E 000 x 0.. 00 E E 00 x..0 00 E E 00 x 0.. E E 00 x 0.0.0 0 E E 00 x 0.00. 0 E E 00 0 x 0.. 0 E E 00 x 0.. 0 0 E E 0 000 0 x 0.. 0 0 0E 0E 0 000 x 0.. 0 0 0E 0E 000 x 0.. E E 000 0 x 0.. E E 000 x 0.0. 0 0 E E 00 x..0 E E 00 x 0.0. 0 0 E E 00 x 0.. E E 00 x 0.. 0 E E 00 0 x 0.. 0 0 E E 00 x 0..0 0 E E 00 0 x 0.. E E 00 x 0.0.00 E E 0 000 x 0..0 0 0 0E 0E 0 000 0 x 0..0 0 0 0E 0E 000 x 0.. 0 0 E E www.vishay.com For technical questions, contact: aluminumcaps@vishay.com Document Number: Revision: -Aug-0
0/0 PLL-SI ELECTRICAL DATA AND ORDERING INFORMATION FOR 0 SERIES (Ø D x L in mm) U R (V) 0 00 Table (mm) (A) (A) 000 x.0. 0 0 0E 0E 00 x 0.. 0 E E 00 x 0.. E E 00 x 0.. E E 00 0 x 0.. E E 00 x 0.0. E E 00 0 x 0..0 0 E E 00 x 0..0 E E 00 x 0.0. 0 0 E E 00 0 x 0.. 0 E E 0 000 x 0.0. 00 00 0E 0E 0 x.. 0 0 E E 000 x 0.. 0 0 0E 0E 00 x 0.. E E 00 x 0.00. E E 00 0 x 0.. 0 0 E E 00 x 0.0. 0 E E 00 0 x 0.0. 0 0 0 E E 00 x 0.0. 0 0 0 E E 00 x 0.. 0 E E 00 0 x 0.. E E 00 x 0.. E E 0 x 0.. 0 0 0 0 E E 0 x 0.. 0 0 E E 0 x 0.. 0 0 E E 0 x 0.. 0 0 0 E E 000 0 x 0..0 0 0 0E 0E 000 x 0.. 0 0 0E 0E 00 0 x 0.. 0 0 E E 00 x 0..0 0 0 E E 00 x 0.0. E E 00 0 x 0.. E E 00 x 0.. 0 E E ELECTRICAL DATA AND ORDERING INFORMATION FOR 0 SERIES U R (V) 00 0 00 Hz 00 Hz NOMINAL CASE SIE Ø D x L NOMINAL CASE SIE Ø D x L (mm) 00 Hz 0 C 00 Hz 0 C (A) 0 khz 0 C I L min I L min I L min 00 khz (µω) 0 khz ORDERING CODE MAL0... -TERM. -TERM. 00 x 0. 0 0 0E 0E 0 x 0 0. 0 0 E E 0 x 0. 0 0 E E 0 x 0 0. 0 0 E E 0 0 x 0. 00 00 E E 0 x 0. 00 00 E E 0 0 x. E E 0 x 0. E E 0 0 x. 0 E E 0 x. 0 E E 000 x 0. 0 0 0 0E 0E x 0. 0 0 0 E E 00 x 0 0. 0 0 0E 0E 0 x 0. 0 E E 0 x 0 0. 0 E E 0 x.0 0 00 E E 0 0 x 0.0 0 00 E E 0 0 x. E E 0 x 0.0 E E 0 0 x. 0 0 E E 0 x. 0 0 E E 0 x. 0 0 E E Document Number: For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: -Aug-0 I L min 00 Hz 0 Hz ORDERING CODE MAL0... -TERM. -TERM.
0/0 PLL-SI ELECTRICAL DATA AND ORDERING INFORMATION FOR 0 SERIES U R (V) 00 00 Hz NOMINAL CASE SIE Ø D x L 00 Hz 0 C I L min I L min 00 khz (µω) 0 khz ORDERING CODE MAL0... -TERM. -TERM. (mm) (A) x 0. 0 0 000 E E x 0 0. 0 0 00 E E x 0. 0 0 E E x 0 0. 0 0 E E 00 0 x 0 0. 0 00 0E 0E 00 x 0 0. 0 00 0E 0E 0 0 x 0 0. 0 E E 0 x 0 0. 0 E E 0 x 0. 0 E E 0 0 x 0. 0 E E 0 x 0. 0 0 E E x 0 0.0 0 0 E E x 0. 0 0 E E x 0 0. 0 0 E E 00 0 x 0 0. 00 0 0E 0E 00 x 0 0. 00 0 0E 0E 0 0 x 0. 0 0 E E 0 x 0 0. 0 0 E E 0 x 0 0. 0 0 0 E E 0 0 x 0 0. 0 0 0 E E 0 x 0. 0 0 0 E E ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage 0 V versions U s =. x U R V versions U s =. x U R Reverse voltage U rev V Current Leakage current After minute at U R I L 0.00 x U R + µa After minutes at U R I L 0.00 x U R + µa Inductance Equivalent series inductance (ESL) All case sizes typ. nh max. nh CAPACITANCE (C). C C 0.0 0. C C 0..0 0. 0. 0. 0. 0. 0. Curve : U R = to 00 V Curve : U R = 00 V Curve : U R 0 V and 0 V 0. Curve : U R = 0 V and V Curve : U R = V, V and 0 V Curve : U R 0 V C 0 = capacitance at 0 C and 00 Hz 0. - 00-0 0 0 00 0 T amb ( C) Fig. Typical multiplier of capacitance as a function of ambient temperature C 0 = capacitance at 0 C and 00 Hz 0. 0 0 0 0 Fig. Typical multiplier of capacitance as a function of frequency www.vishay.com For technical questions, contact: aluminumcaps@vishay.com Document Number: Revision: -Aug-0
0/0 PLL-SI EQUIVALENT SERIES RESISTANCE () 0 0 0 Curve : U R 0 V Curve : U R = 00 V Curve : U R 00 V. 0.0 0 0., Curve : U R = 0 to 00 V Curve : U R = 00 to 00 V 0-0 = typical at 0 C and 00 Hz - 00-0 0 0 00 0 T amb ( C) Fig. Typical multiplier of as a function of ambient temperature 0 = typical at 0 C and 00 Hz 0 0 0 0 0 Fig. Typical multiplier of as a function of frequency IMPEDANCE () 0 0 0 Curve : U R 0 V Curve : U R = 0 V Curve : U R 00 V 0 0 Curve : µf Curve : µf Curve : 00 µf Curve : 0 µf Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve 0: 00 µf 0 0 0, 0 0-0 = typical impedance at 0 C and 00 Hz - 00-0 0 0 00 0 T amb ( C) Fig.0 Typical multiplier of impedance as a function of ambient temperature Case Ø D x L = x mm T amb = 0 C 0 0 0 0 0 0 0 0 Fig. Typical impedance as a function of frequency 0 0 Curve : µf Curve : 00 µf Curve : 0 µf Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve 0: 00 µf 0 0 Curve : µf Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve 0: 0 000 µf 0 0 0 0 0 0 Case Ø D x L = x 0 mm T amb = 0 C 0 0 0 0 0 0 0 0 Fig. Typical impedance as a function of frequency Case Ø D x L = x 0 mm and x 0 mm T amb = 0 C 0 0 0 0 0 0 0 0 Fig. Typical impedance as a function of frequency Document Number: For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: -Aug-0
0/0 PLL-SI IMPEDANCE () 0 0 0 0 0 Curve : 00 µf Curve : 0 µf Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 0 000 µf Curve 0: 000 µf 0 0 0 0 0 Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 0 000 µf Curve : 000 µf Curve 0: 000 µf Case Ø D x L = 0 x 0 mm and x 0 mm Case Ø D x L = 0 x 0 mm and x 0 mm T amb = 0 C 0 0 0 0 0 0 0 0 Fig. Typical impedance as a function of frequency T amb = 0 C 0 0 0 0 0 0 0 0 Fig. Typical impedance as a function of frequency 0 0 0 0 0 Curve : 0 µf Curve : 0 µf Curve : 0 µf Curve : 00 µf Curve : 00 µf Curve : 00 µf Curve : 0 000 µf Curve : 000 µf Curve : 000 µf Curve 0: 000 µf Case Ø D x L = x 0 mm and 0 x 0 mm 0 0 0 0 0 Curve : 0 µf Curve : 0 µf Curve : 000 µf Curve : 00 µf Curve : 00 µf Curve : 0 000 µf Curve : 000 µf Curve : 000 µf Curve : 000 µf Curve 0: 000 µf Case Ø D x L = x 0 mm T amb = 0 C 0 0 0 0 0 0 0 0 Fig. Typical impedance as a function of frequency T amb = 0 C 0 0 0 0 0 0 0 0 Fig. Typical impedance as a function of frequency www.vishay.com For technical questions, contact: aluminumcaps@vishay.com Document Number: Revision: -Aug-0
0/0 PLL-SI RIPPLE CURRENT AND USEFUL LIFE. I A.... I A = actual ripple current at 00 Hz = rated ripple current at 00 Hz and 0 C () Useful life at 0 C and applied: 000 hours for 0 V types Table...0..........0 0. 0. 0.0 0 0 0 0 0 00 0 00 00 00 00 0 0 0 0 0 0 Fig. Multiplier of useful life as a function of ambient temperature and ripple current load MULTIPLIER OF RIPPLE CURRENT ( ) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) MULTIPLIER... life multiplier U R =0toV U R =0to00V U R > 00 V 0 0. 0. 0. 00.00.00.00 00.0.0. 00.0.0. 000... 000... 000... 0 000...0 () 00 0 T amb ( C) Document Number: For technical questions, contact: aluminumcaps@vishay.com www.vishay.com Revision: -Aug-0
0/0 PLL-SI Table TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE Endurance IEC 0-/ EN000 subclause. Useful life CECC 00 subclause.. Shelf life (storage at high temperature) IEC 0-/ EN000 subclause. PROCEDURE (quick reference) T amb = 0 C; U R applied; 0 V types: 000 hours; V types: 000 hours T amb = 0 C; U R and applied; 0 V types: 000 hours; V types: 0 000 hours T amb = 0 C; no voltage applied; 00 hours After test: U R to be applied for 0 minutes hours to hours before measurement REQUIREMENTS U R 00 V; ΔC/C: ± % U R > 00 V; ΔC/C: ± 0 %. x spec. limit x spec. limit I L spec. limit U R 00 V; ΔC/C: ± % U R > 00 V; ΔC/C: ± 0 % x spec. limit x spec. limit I L spec. limit no short or open circuit, no visible damage total failure percentage; U R > 00 V: % ΔC/C: ± 0 %. x spec. limit I L x spec. limit www.vishay.com For technical questions, contact: aluminumcaps@vishay.com Document Number: 0 Revision: -Aug-0
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 000 www.vishay.com Revision: -Jul-0