R-R SERES miniature direct solenoid actuated valves
RR i c r o i r d i r e c t s o l e n o i d a c t u a t e d m i n i a t u r e v a l v e s T E D T................................................... 3 V V E S D E S E E T..................................... 3 V V E / S E D E S S....................................... 4 E X D S........................................ 5 E S S R Y T S................................................... 6 V V E S E R V E T S.............................................. 7 R R ETURES: icroir valves are designed for miniature automation applications blending high performance in a miniature package size. icroir offers high flow (v = 0.13) in a compact size only 15 millimeters wide. icroir also features many plug in features including a plug in solenoid and optional speed control sandwich. Die cast aluminum alloy multi purpose construction lug in direct solenoid provides fast response lug in connector, ED light, and voltage surge protection lush non locking manual override Time proven lapped spool and sleeve assembly olded Valve unit recessed to base gasket provides positive integral sealing plug igh flow capacity in a miniature design
R R RR i c r o i r v a l v e s direct solenoid actuated plug in solenoid with plug in connnector and ED light multi purpose 5 ported, 4 way, 2 and 3 position lapped spool and sleeve assembly v to 0.13 1/8 T or tap / 10 32 U 3 or 5 ports for unlubricated or lubricated service integral speed control available modular building block system T e c h n i c a l d a t a Valve Data T U 3 T 5 v: 1/8 = 0.13 10 32 = 0.13 1/8 = 0.13 5 = 0.13 low apacity: upstream pressure to atmosphere (@ 80 S) 6 S 6 S 128l/m 128 l/m perating ressure Range: 28 g. Vacuum to 150 S Vacuum to 10 ar Temperature Range: 10 to +115 ambient 23 to +46 ambient p e r a t i n g d a t a olding Time to Energize Time to De Energize Voltage urrent (amps) ower (Watts) single, spring return double, detented 3 position spring centered single, spring return double, detented 3 position spring centered 12 VD 0.16 2.0 1.8 W 0.0 0.0 0.0 0.018 / 0.018 24 VD 0.083 2.0 1.8 W 0.0 0.0 0.0 0.018 / 0.018 3.5 watt also available, consult factory for more information. i c r o i r mo d e l s e l e c t i o n t a b l e Valve unction UT Y 10S400 (standard valve/mounting combinations) ort Size ndividual base: side ports, individual exhaust lexilok manifoldwith side cylinder ports without speed control with speed control without speed control with speed control 10 32 U 3 10S441 10S446 10S411 10S421 UT Y 10SS400 UT Y 10SS500 UT Y 10SS600 1/8 T 11S441 11S446 11S411 11S421 10 32 U 3 10SS441 10SS446 10SS411 10SS421 1/8 T 11SS441 11SS446 11SS411 11SS421 10 32 U 3 10SS541 10SS546 10SS511 10SS521 1/8 T 11SS541 11SS546 11SS511 11SS521 10 32 U 3 10SS641 10SS646 10SS611 10SS621 1/8 T 11SS641 11SS646 11SS611 11SS621 icroir is available in standard voltages of 12 VD and 24 VD. Specify voltage after model number. 1/8 options: or 1/8 ports, add a to the 1/8 T model number. EXE: 11S411 5 options: or 5 ports, add an to the 10 32 U 3 model number. EXE: 10S411-3
RR i c r o i r v a l v e d i m e n s i o n s w i t h 10 32 U 3 b a s e Dimensions D E 1.20 (30.5) 0.60 (15.2) 0.20 (5.1) 1.00 (25.4) 0.50 (12.7) 0.38 (9.6) 0.76 (19.3) 0.65 (16.5) 0.40 (10.2) 2.73 (69.3) (105.1) 0.16 (4.1) 0.31 (7.9) 0.60 (15.2) 1.18 (30.0) dim. = in. (mm) D E 10 32 U 3 or 5 ports (5) 1 3 5 Diameter ounting oles (2) 0.089 (2.26) SE SED DUE SED 2 ST DUE SED 3 ST i c r o i r v a l v e d i m e n s i o n s w i t h 1/8 T b a s e Dimensions D E 1.75 (44.5) 0.88 (22.4) 0.28 (7.1) 1.00 (25.4) 0.50 (12.7) 0.40 (10.2) 0.80 (20.3) 1.00 (25.4) 0.56 (.2) 2.88 (73.3) (105.1) 0.28 (7.1) 0.75 (19.1) 1.04 (26.2) 1.62 (41.1) dim. = in. (mm) D E 1/8 T or Tap ports (5) Diameter ounting oles (2) 0.101 (2.56) SE SED DUE SED 2 ST DUE SED 3 ST
R R RR i c r o i r l e x i l o k m a n i f o l d s unique modular design allows multistation manifolding 1/8 T or tap / 10 32 U 3 or 5 side cylinder ports end plate tapped, both ends o w t o o r d e r ist in order, left to right, beginning with Station 1. Example: anifold Type 10 32 U 3 1/8 T ssembly it:* 01 2 11 2 Station 1: 10S411 24VD 11S411 24VD Station 2: 10SS411 24VD 11SS411 24VD locking lug: 239 466 239 466 (install in gallery) SSEED SSEED *ow to order assembly kits for icroir lexilok: 10 32 = 1 1/8 = 11 o. of Stations ort Type lank = ports 1 & 3/5, 1/8 T ports 2 & 4, 1/8 T or 10-32 U-3 = ll orts, 1/8 = orts 2 & 4, 5 orts 1 & 3/5, 1/8 actory assembled kits consist of end plates, screw assemblies, and assembly and testing of the entire lexilok manifold for proper operation. Due to flow, wiring, and practical assembly limitations, a maximum of 12 stations per assembly is recommended. i c r o i r l e x i l o k d i m e n s i o n s Dimensions 10 32 1/8 (105.2) (105.2) E E lexilok o. 15 side and bottom cylinder ports E E 3 osition 2 osition D 1.456 (37) 1.432 (36.4) E 0.708 (18) 0.456 (11.6) 0.713 (18.1) 0.469 (11.9) Standard 4 way 0.80 (20.3).875 (22.2) 1.64 (41.7) 1.75 (44.5) 2.81 (71.4) 0.667 (16.9) 2.88 (73.2) 0.957 (24.3) Diameter ounting oles (4) 10 32 =.125 inches (3.18 mm) 1/8 = 0.201 inches (5.1 mm) 0.207 (5.3) 0.292 (7.4) 0.30 (7.6) 0.313 (8.0) 0.312 (7.9) 0.312 (7.9) 0.625 (15.9) 0.625 (15.9) 0.085 (2.2) 0.085 (2.2) 0.45 (11.4) 0.375 (9.5) R 0.437 (11.1) 0.605 (15.4) 0.54 (13.7) 0.938 (23.8) 10 32 U (1/8 T) Typical S 0.875 (22.2) 1.25 (31.8) 1/8 T Typical T 1.745 (44.3) 2.12 (53.9) U 1.95 (49.5) 2.33 (59.2) -5
RR i c r o i r a c c e s s o r y k i t s E n d p l a t e k i t s 10 32 U 3 239 462 1/ 8T 239 463 5 239 464 1/8 239 465 RT UER RE"D RT E 10-32 U-3 1/8 T 1/8 5 2 Seal 126-107 126-107 126-107 126-107 1 Right End late 104-4 104-416 104-428 104-426 1 eft End late 104-415 104-417 104-429 104-427 2 Screws 127-564 127-564 127-564 127-564 l a n k s t a t i o n p l a t e 239 457 l o c k i n g d i s c k i t 239 466 (2) Screw 127-584 asket 113-408 a s e a s s e m b l i e s l e x i l o k m a n i f o l d k i t s Seal # 126-107 Stud # 127-584 3 1 5 1 10-32 U-3 1/8 T 3 5 1/8 T 10-32 U-3 SE TYE RT UER 10 32 U 3 side ports 103 641 1/8 T side ports 103 643 5 side ports 103 651 1/8 side ports 103 653 D TYE RT UER 10 32 U 3 cylinder ports 239 458 1/8 T cylinder ports 239 459 5 cylinder ports 239 460 1/8 cylinder ports 239 461 S p e e d c o n t r o l k i t (v = 0.9) 239 366 S o l e n o i d c a p s u l e a s s e m b l i e s Valve unction 12/ End 12 VD 24 VD 12/ 226 839 226 840 3 position 12 226 857 226 858 3 position 226 839 226 840 l u g o n n e c t o r (with 12 leads) 230 443 includes gasket #113 405 and screw assembly #127 580. dds 0.21 (5.2mm) to heighth. -6 lug connector is not included with solenoid assemblies or valve models. ust order separately.
R R RR i c r o i r v a l v e s e r v i c e k i t s a n d p a r t s it o. 1 1* (for models 10S4, 10SS4) it o. 1 2* (for models 10SS4, 11SS4) 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 10 7 8 9 10 11 12 13 RE D. RT E RT 1 1 Valve ody (not sold separately) 2 1 Sleeve ssembly w/seals 209 383 4 1 ameplate 122 868 * 5 1 Spacer 116 403 6 1 Solenoid apsule ssembly see chart 7 2 Screw 127 576 8 1 Spring over 104 408 * 9 2 Seal 126 316 * 10 1 umper 1 173 * 11 1 Spring 115 298 * 12 1 asket 113 405 13 2 Screw 127 575 RE D. RT E RT 1 1 Valve ody (not sold separately) 2 1 Sleeve ssembly w/seals 209 383 4 1 ameplate 122 868 * 5 1 Detent ssembly 210 132 6 2 Solenoid apsule ssembly see chart * 7 2 Seal 126 316 * 8 1 umper 1 173 * 9 1 asket 113 405 10 2 Screw 127 575 it o. 1 3* (for models 10SS5, 11SS5) it o. 1 3* (for models 10SSS6, 11SS6) 15 '12' ED 1 2 3 4 5 6 '' ED '12' ED 16 1 2 3 4 5 6 '' ED 7 8 9 10 11 12 13 7 8 9 10 11 12 13 RE D. RT E RT 1 1 Valve ody (not sold separately) 2 1 Sleeve ssembly w/seals 209 384 4 1 ameplate 122 868 * 5 1 umper 1 173 6 1 Solenoid apsule (12) see chart * 7 3 Seal 126 316 8 1 dapter 119 355 * 9 1 Spring Retainer 116 407 * 10 1 Spacer 116 405 * 11 1 Spring 115 301 * 12 1 Spring Retainer 116 406 * 13 1 asket 113 405 2 Screw 127 575 15 1 Solenoid apsule () see chart RE D. RT E RT 1 1 Valve ody (not sold separately) 2 1 Sleeve ssembly w/seals 209 385 4 1 ameplate 122 868 * 5 1 umper 1 173 6 1 Solenoid apsule (12) see chart * 7 3 Seal 126 316 8 1 dapter 119 355 * 9 1 Spring Retainer 116 407 * 10 1 Spacer 116 405 * 11 1 Spring 115 301 * 12 1 Spring Retainer 116 406 * 13 1 asket 113 405 2 Screw 127 575 15 1 Solenoid apsule () see chart * ndicates parts included in service kit. Spool & sleeve assemblies are precision matched sets; assemblies include (6) 126 3 seals; spools are not interchangeable.