LOW DROPOUT LINEAR REGULATOR Description Features The is a low dropout three-terminal regulator. The has been optimized for low voltage where transient response and minimum input voltage are critical. It provides current limit and thermal shutdown. Its circuit includes a trimmed bandgap reference to assure output voltage accuracy to be within ±%. Onchip thermal shutdown provides protection against a combination of high current and ambient temperature that would create excessive junction temperature. The is available in.v,.5v,.8v,.5v, 3.3V, 5.0V fixed output voltage versions and ADJ output voltage version. The fixed versions integrate the adjust resistors. It is also available in an adjustable version which can set the output voltage with two external resistors. The is available in the industry-standard TO5- Series (including TO5- (3), TO5- (4), and TO5- (5)), SOT89 and SOT3 power packages. Current Limit:.35A (Typ) Output Noise from 0Hz to 0KHz: 0.003% of V OUT PSRR at I OUT = 300mA and f = 0Hz: 70dB Output Voltage Accuracy: ±% (Except.V Version) On-chip Thermal Shutdown Maximum Quiescent Current: I QMAX = 6mA Compatible with Low ESR Ceramic Capacitor Operation Junction Temperature: -0 C to +5 C Totally Lead-Free & Fully RoHS Compliant (Notes & ) Halogen and Antimony Free. Green Device (Note 3) Applications USB Device Add-on Card DVD Player PC Motherboard Notes:. No purposely added lead. Fully EU Directive 00/95/EC (RoHS) & 0/65/EU (RoHS ) compliant.. See http:///quality/lead_free.html for more information about s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green products are defined as those which contain <900ppm bromine, <900ppm chlorine (<500ppm total Br + Cl) and <000ppm antimony compounds. Pin Assignments 3 INPUT 3 INPUT OUTPUT OUTPUT ADJ/GND ADJ/GND TO5- (3) Option TO5- (3) Option 3 INPUT 3 INPUT VOUT OUTPUT OUTPUT ADJ /GND ADJ/GND TO5- (4) TO5- (5) of 3
Pin Assignments (Cont.) 3 INPUT 3 INPUT VOUT OUTPUT VOUT OUTPUT ADJ/GND ADJ/GND SOT89 Option / R Package SOT89 Option / R Package 3 OUTPUT 3 OUTPUT VIN INPUT VIN INPUT ADJ/GND ADJ/GND SOT89 Option / R Package SOT89 Option / R Package 3 INPUT 3 OUTPUT VOUT OUTPUT ADJ/GND ADJ/GND ADJ/GND INPUT SOT3/ H Package SOT3/ H Package of 3
Typical Applications Circuit (Note 4) Note 4: The is compatible with low ESR ceramic capacitor. The ESR of the output capacitors must be less than 0Ω. A minimum of 0µF output capacitor is required. Functional Block Diagram 3(){} INPUT Thermal - Protection + (3){3} For Adjustable Output, disconnect A and A, connect B OUTPUT For Fixed Output, connect A and A, disconnect B A B A (){} ADJ/GND A(B){C} A for TO5- Series/SOT3 (H)/SOT89 (R) B for SOT89 (R) C for SOT3 (H) 3 of 3
Absolute Maximum Ratings (Note 5) Symbol Parameter Rating Unit V IN Input Voltage 8 V T J Operating Junction Temperature Range +50 C T STG Storage Temperature Range -65 to +50 C SOT89 70 θ JA Thermal Resistance (Without Heatsink) SOT3 5 C/W TO5- Series 00 SOT89 50 θ JA Thermal Resistance (With Heatsink) (Note 6) SOT3 00 C/W TO5- Series 70 T LEAD Lead Temperature (Soldering, 0sec) +60 C Notes: 5. Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to Absolute Maximum Ratings for extended periods may affect device reliability. 6. Chip is soldered to 00mm (0mm*0mm) copper (top side solder mask) on oz. layers FR-4 PCB with 8*0.5mm vias. Recommended Operating Conditions Symbol Parameter Min Max Unit V IN Input Voltage 5 V T J Operating Junction Temperature Range -0 +5 C Electrical Characteristics -ADJ (Operating Conditions: V IN = V OUT +V, I OUT = 0mA, T J = +5 C, unless otherwise specified. (P maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -0 C to +5 C.) Symbol Parameter Conditions Min Typ Max Unit V REF Reference Voltage.5V V IN -V OUT 0V V RLINE Line Regulation.5V V IN -V OUT 0V.38.50.6.5.50.70 0.00 0. 0. V RLOAD Load Regulation 0.4.0 % V DROP Dropout Voltage V REF = %, I OUT = 0.8A SOT3..3 V TO5- Series.3.4 V I LIMIT Current Limit.35 A Adjust Pin Current 60 0 µa Adjust Pin Current Change.5 (V IN -V OUT ) 0V 0. 5 µa Minimum Load Current.5 (V IN -V OUT ) 0V.7 5 ma PSRR Ripple Rejection f = 0Hz, C OUT = µf (V IN -V OUT ) = 3V, I OUT = 300mA V % 70 db Temperature Stability 0.5 % RMS Output Noise (% of V OUT ) T A = +5 C, 0Hz f 0KHz 0.003 % Thermal Shutdown Junction Temperature +60 C Thermal Shutdown Hysteresis +6 C θ JC Thermal Resistance (Junction to Case) SOT89 30 SOT3 5 TO5- Series 0 C/W 4 of 3
Electrical Characteristics -. (Cont.) (Operating Conditions: V IN 0V, I OUT = 0mA, T J = +5 C, unless otherwise specified. (P maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -0 C to +5 C.) Symbol Parameter Conditions Min Typ Max Unit V OUT Output Voltage.5V V IN -V OUT 0V V RLINE Line Regulation.5V V IN -V OUT 0V.76..4.5..8 0.5 6 0 V RLOAD Load Regulation 5 mv V DROP Dropout Voltage V OUT = %, I OUT = 0.8A SOT3..3 V TO5- Series.3.4 V I LIMIT Current Limit.35 A I Q Quiescent Current I OUT = 0 4 6 ma PSRR Ripple Rejection f = 0Hz, C OUT = µf (V IN -V OUT ) = 3V, I OUT = 300mA V mv 70 db Temperature Stability 0.5 % RMS Output Noise (% of V OUT ) T A = +5 C, 0Hz f 0KHz 0.003 % Thermal Shutdown Junction Temperature +60 C Thermal Shutdown Hysteresis +6 C θ JC Thermal Resistance (Junction to Case) SOT89 30 SOT3 5 TO5- Series 0 C/W Electrical Characteristics -.5 (Cont.) (Operating Conditions: V IN 0V, I OUT = 0mA, T J = +5 C, unless otherwise specified. (P maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -0 C to +5 C.) Symbol Parameter Conditions Min Typ Max Unit V OUT Output Voltage.5V V IN -V OUT 0V V RLINE Line Regulation.5V V IN -V OUT 0V.485.5.55.470.5.530 0.5 6 0 V RLOAD Load Regulation 5 mv V DROP Dropout Voltage V OUT = %, I OUT = 0.8A SOT3..3 V TO5- Series.3.4 V I LIMIT Current Limit.35 A I Q Quiescent Current I OUT = 0 4 6 ma PSRR Ripple Rejection f = 0Hz, C OUT = µf (V IN -V OUT ) = 3V, I OUT = 300mA V mv 70 db Temperature Stability 0.5 % RMS Output Noise (% of V OUT ) T A = +5 C, 0Hz f 0KHz 0.003 % Thermal Shutdown Junction Temperature +60 C Thermal Shutdown Hysteresis +6 C θ JC Thermal Resistance (Junction to Case) SOT89 30 SOT3 5 TO5- Series 0 C/W 5 of 3
Electrical Characteristics -.8 (Cont.) (Operating Conditions: V IN 0V, I OUT = 0mA, T J = +5 C, unless otherwise specified. (P maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -0 C to +5 C.) Symbol Parameter Conditions Min Typ Max Unit V OUT Output Voltage.5V V IN -V OUT 0V V RLINE Line Regulation.5V V IN -V OUT 0V.78.8.88.764.8.836 0.5 6 0 V RLOAD Load Regulation 5 mv V DROP Dropout Voltage V OUT = %, I OUT = 0.8A SOT3..3 V TO5- Series.3.4 V I LIMIT Current Limit.35 A I Q Quiescent Current I OUT = 0 4 6 ma PSRR Ripple Rejection f = 0Hz, C OUT = µf (V IN -V OUT ) = 3V, I OUT = 300mA V mv 70 db Temperature Stability 0.5 % RMS Output Noise (% of V OUT ) T A = +5 C, 0Hz f 0KHz 0.003 % Thermal Shutdown Junction Temperature +60 C Thermal Shutdown Hysteresis +6 C θ JC Thermal Resistance (Junction to Case) SOT89 30 SOT3 5 TO5- Series 0 C/W Electrical Characteristics -.5 (Cont.) (Operating Conditions: V IN 0V, I OUT = 0mA, T J = +5 C, unless otherwise specified. (P maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -0 C to +5 C.) Symbol Parameter Conditions Min Typ Max Unit V OUT Output Voltage.5V V IN -V OUT 0V V RLINE Line Regulation.5V V IN -V OUT 0V.475.5.55.455.5.545 0.5 6 0 V RLOAD Load Regulation 5 mv V DROP Dropout Voltage V OUT = %, I OUT = 0.8A SOT3..3 V TO5- Series.3.4 V I LIMIT Current Limit.35 A I Q Quiescent Current I OUT = 0 4 6 ma PSRR Ripple Rejection f = 0Hz, C OUT = µf (V IN -V OUT ) = 3V, I OUT = 300mA V mv 70 db Temperature Stability 0.5 % RMS Output Noise (% of V OUT ) T A = +5 C, 0Hz f 0KHz 0.003 % Thermal Shutdown Junction Temperature +60 C Thermal Shutdown Hysteresis +6 C θ JC Thermal Resistance (Junction to Case) SOT89 30 SOT3 5 TO5- Series 0 C/W 6 of 3
Electrical Characteristics -3.3 (Cont.) (Operating Conditions: V IN 0V, I OUT = 0mA, T J = +5 C, unless otherwise specified. (P maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -0 C to +5 C.) Symbol Parameter Conditions Min Typ Max Unit V OUT Output Voltage.5V V IN -V OUT 0V V RLINE Line Regulation.5V V IN -V OUT 0V 3.67 3.3 3.333 3.35 3.3 3.365 0.5 6 0 V RLOAD Load Regulation 5 mv V DROP Dropout Voltage V OUT = %, I OUT = 0.8A SOT3..3 V TO5- Series.3.4 V I LIMIT Current Limit.35 A I Q Quiescent Current I OUT = 0 4 6 ma PSRR Ripple Rejection f = 0Hz, C OUT = µf (V IN -V OUT ) = 3V, I OUT = 300mA Temperature Stability 0.5 % RMS Output Noise (% of V OUT ) T A = +5ºC, 0Hz f 0KHz 0.003 % Thermal Shutdown Junction Temperature +60 C Thermal Shutdown Hysteresis +6 C θ JC Thermal Resistance (Junction to Case) SOT89 30 SOT3 5 TO5- Series 0 70 V mv db C/W Electrical Characteristics -5.0 (Cont.) (Operating Conditions: V IN 0V, I OUT = 0mA, T J = +5 C, unless otherwise specified. (P maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -0 C to +5 C.) Symbol Parameter Conditions Min Typ Max Unit V OUT Output Voltage.5V V IN -V OUT 0V V RLINE Line Regulation.5V V IN -V OUT 0V 4.950 5.0 5.050 4.900 5.0 5.00 0.5 6 0 V RLOAD Load Regulation 5 mv V DROP Dropout Voltage V OUT = %, I OUT = 0.8A SOT3..3 V TO5- Series.3.4 V I LIMIT Current Limit.35 A I Q Quiescent Current I OUT = 0 4 6 ma PSRR Ripple Rejection f = 0Hz, C OUT = µf (V IN -V OUT ) = 3V, I OUT = 300mA V mv 70 db Temperature Stability 0.5 % RMS Output Noise (% of V OUT ) T A = +5 C, 0Hz f 0KHz 0.003 % Thermal Shutdown Junction Temperature +60 C Thermal Shutdown Hysteresis +6 C θ JC Thermal Resistance (Junction to Case) SOT89 30 SOT3 5 TO5- Series 0 C/W 7 of 3
Performance Characteristics Line Regulation vs. Junction Temperature Load Regulation vs. Junction Temperature 0 Line Regulation (mv) 0.4 0. 0.0-0. -.5V V IN =4.5V to 0V I OUT =0mA Load Regulation (mv) 5 0-5 -0-5 -.5V V IN =4.5V I OUT =0mA to 800mA -0.4-0 -0 0 0 40 60 80 00 0 Junction Temperature ( o C) -5-0 0 0 40 60 80 00 0 Junction Temperature ( o C) Reference Voltage vs. Junction Temperature Output Voltage vs. Junction Temperature.70.60 Reference Voltage (V).65.60.55.50.45.40.35 -ADJ V IN =4.5V I OUT =0mA Output Voltage (V).58.56.54.5.50.48.46 -.5V V IN =4.5V I OUT =0mA.30.44.5.4.0-0 0 0 40 60 80 00 0 Junction Temperature ( o C).40-0 0 0 40 60 80 00 0 Junction Temperature ( o C) Minimum Load Current vs. Junction Temperature Adjust Pin Current vs. Junction Temperature Minimum Load Current (ma) 3 0 - -ADJ V IN =4.5V Adjust Pin Current ( A) 00 90 80 70 60 50 40 30 0 -ADJ V IN =4.5V 0 - -0 0 0 40 60 80 00 0 Junction Temperature ( o C) 0-0 0 0 40 60 80 00 0 Junction Temperature ( o C) 8 of 3
Performance Characteristics (Cont.) Dropout Voltage vs. Output Current Power Dissipation vs. Case Temperature Dropout Voltage (V).8.7.6.5.4.3...0-0 O C 0 O C +5 O C +85 O C +00 O C Power Dissipation (W) 0 9 8 7 6 5 4 3 -.5V Package: SOT-3 No Heat Sink 0.9 0.8 0.0 0. 0.4 0.6 0.8.0 Output Current (A) 0-0 0 0 40 60 80 00 0 Case Temperature ( o C) Line Transient Response Load Transient Response V IN IN (0.5V/Div) V V OUT (0.V/Div) OUT 0. 0. 0-0. 5.3 4.8 4.3 3.8 Time e (0 (0µs/Div) s/ ) I OUT I (0.3A/Div) V OUT (0.3A/Div) OUT (50mV/Div) VOUT (50mV/Div) 00 50 0-50 0.6 0.3 0-0.3-0.6 0mA Time (0µs/Div) Time (0 s/div) PSRR vs. Frequency Current Limit vs. Junction Temperature 80.6 70.4 60. PSRR (db) 50 40 30 0 Current Limit (A).0 0.8 0.6 0.4 0. -.5V V IN =4.5V No Heat Sink @V OUT =V OUT (nom)x98% 0 0 00 k 0k 00k Frequency (Hz) 0.0-0 0 0 40 60 80 00 0 Junction Temperature ( o C) 9 of 3
Performance Characteristics (Cont.) Dropout Voltage vs. Junction Temperature Dropout Voltage (V).0.9.8.7.6.5.4.3...0 0.9 I OUT =0.A I OUT =0.5A I OUT =0.8A I OUT =A 0.8-0 0 0 40 60 80 00 0 Junction Temperature ( O C) 0 of 3
Ordering Information Diodes IC s Pb-free products with "G" suffix in the part number, are RoHS compliant and green. Package SOT3 SOT3 SOT89 SOT89 Temperature Range -0 C to +5 C -0 C to +5 C Part Number Marking ID Packing H-ADJTRG GH5B 4000/Tape & Reel H-.TRG GH6B 4000/Tape & Reel H-.5TRG GH5C 4000/Tape & Reel H-.8TRG GH6C 4000/Tape & Reel H-.5TRG GH5D 4000/Tape & Reel H-3.3TRG GH6D 4000/Tape & Reel H-5.0TRG GH5E 4000/Tape & Reel H-ADJTRG GH4H 4000/Tape & Reel H-.TRG GH5H 4000/Tape & Reel H-.5TRG GH7H 4000/Tape & Reel H-.8TRG GH7H 4000/Tape & Reel H-.5TRG GH8H 4000/Tape & Reel H-3.3TRG GH38H 4000/Tape & Reel H-5.0TRG GH3H 4000/Tape & Reel R-ADJTRG G7N 000/Tape & Reel R-.TRG G8J 000/Tape & Reel R-.5TRG G8K 000/Tape & Reel R-.8TRG G8L 000/Tape & Reel R-.5TRG G8M 000/Tape & Reel R-3.3TRG G8N 000/Tape & Reel R-5.0TRG G7M 000/Tape & Reel R-ADJTRG G4O 000/Tape & Reel R-.TRG G43M 000/Tape & Reel R-.5TRG G43N 000/Tape & Reel R-.8TRG G43O 000/Tape & Reel R-.5TRG G70M 000/Tape & Reel R-3.3TRG G70N 000/Tape & Reel R-5.0TRG G33N 000/Tape & Reel of 3
Ordering Information (Cont.) Package TO5- Series Temperature Range -0 C to +5 C Part Number Marking ID Packing D-ADJG D-ADJG 80/Tube D-ADJTRG D-ADJG 500/Tape & Reel D-.G D-.G 80/Tube D-.TRG D-.G 500/Tape & Reel D-.5G D-.5G 80/Tube D-.5TRG D-.5G 500/Tape & Reel D-.8G D-.8G 80/Tube D-.8TRG D-.8G 500/Tape & Reel D-.5G D-.5G 80/Tube D-.5TRG D-.5G 500/Tape & Reel D-3.3G D-3.3G 80/Tube D-3.3TRG D-3.3G 500/Tape & Reel D-5.0G D-5.0G 80/Tube D-5.0TRG D-5.0G 500/Tape & Reel Marking Information () SOT3 Series XXXXX YWWAXX First Line: Logo and Marking ID (See Ordering Information) Second Line: Date Code Y: Year WW: Work Week of Molding A: Assembly House Code XX: 7 th and 8 th Digits of Batch Number () TO5- Series D -X.XG YWWAXX First and Second Lines: Logo and Marking ID (See Ordering Information) Third Line: Date Code Y: Year WW: Work Week of Molding A: Assembly House Code XX: 7 th and 8 th Digits of Batch Number of 3
Marking Information (Cont.) (3) SOT89 Series XXXX YWWAXX First Line: Logo and Marking ID (See Ordering Information) Second Line: Date Code Y: Year WW: Work Week of Molding A: Assembly House Code XX: 7 th and 8 th Digits of Batch Number Package Outline Dimensions (All dimensions in mm (inch).) () Package Type: SOT3 3 of 3
Package Outline Dimensions (Cont.) (All dimensions in mm (inch).) () Package Type: SOT89 4 of 3
Package Outline Dimensions (Cont.) (All dimensions in mm (inch).) (3) Package Type: TO5- (3) 5 of 3
Package Outline Dimensions (Cont.) (All dimensions in mm (inch).) (4) Package Type: TO5- (4) 6 of 3
Package Outline Dimensions (Cont.) (All dimensions in mm (inch).) (5) Package Type: TO5- (5) 7 of 3
Suggested Pad Layout () Package Type: SOT3 Grid placement courtyard X Y G Z X Y E E Dimensions Z G X X Y E E Value 8.400/0.33 4.000/0.57.00/0.047 3.500/0.38.00/0.087.300/0.09 4.600/0.8 8 of 3
Suggested Pad Layout (Cont.) () Package Type: SOT89 Dimensions Z X X X Y Y E Value 4.600/0.8 0.550/0.0.850/0.073 0.800/0.03.300/0.05.475/0.058.500/0.059 9 of 3
Suggested Pad Layout (Cont.) (3) Package Type: TO5- (3) Dimensions Z X X=Y Y G E Value.600/0.457.500/0.059 7.000/0.76.500/0.098.00/0.083.300/0.09 0 of 3
Suggested Pad Layout (Cont.) (4) Package Type: TO5- (4) Dimensions Z X X=Y Y G E Value.600/0.457.500/0.059 7.000/0.76.500/0.098.00/0.083.300/0.09 of 3
Suggested Pad Layout (Cont.) (5) Package Type: TO5- (5) Dimensions Z X X=Y Y G E Value.600/0.457.500/0.059 7.000/0.76.500/0.098.00/0.083.300/0.09 of 3
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. does not assume any liability arising out of the application or use of this document or any product described herein; neither does convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold and all the companies whose products are represented on website, harmless against all damages. does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use products for any unintended or unauthorized application, Customers shall indemnify and hold and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by. LIFE SUPPORT products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of. As used herein: A. Life support devices or systems are devices or systems which:. are intended to implant into the body, or. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by. Further, Customers must fully indemnify and its representatives against any damages arising out of the use of products in such safety-critical, life support devices or systems. Copyright 04, 3 of 3