SM0T Series Nvember 206 Pletrnics SM0T Series is a miniature surface munt crystal. Package is ideal fr autmated surface munt assembly and reflw practices. Tape and Reel packaging 2 MHz t 67.5 MHz 2.5 x 3.2 mm 4 pad rd AT Cut Fundamental and 3 Overtne Crystals Ideal fr use in hand held cnsumer prducts Pletrnics Inc. certifies this device is in accrdance with the RHS 6/6 (20/65/EC) and WEEE (2002/96/EC) directives. Pletrnics Inc. guarantees the device des nt cntain the fllwing: Cadmium, Hexavalent Chrmium, Lead, Mercury, PBB s, PBDE s Weight f the Device: 0.03 grams Misture Sensitivity Level: As defined in J-STD-020D. Secnd Level Intercnnect cde: e4 Electrical Specificatin: Item Min Unit Cnditin Frequency Range 2 60 MHz Calibratin Frequency Tlerance 0 50 ppm at +25 C +_ 3 C, see part number fr ptins Frequency Stability 3 50 ppm see part number fr available ptins Equivalent Series Resistance (ESR) - 200 Ohms 2 MHz t 4.38 MHz - 50 Ohms 4.38 MHz t 6 MHz - 60 Ohms 6 MHz t 22 MHz - 50 Ohms 22 MHz t 50 MHz Drive Level - 00 µw use 0 µw fr testing Shunt Capacitance (C0) - 5 pf Pad t Pad capacitance Aging at 25 C +_ 3 C -5 +5 ppm /Yr fr the first year -2 +2 ppm /Yr after the first year Operating Temperature Range -40 +25 C see part number fr available ptins Strage Temperature Range -55 +25 C AT Cut Crystal Frequency versus Temperature Typical Perfrmance: Prduct infrmatin is current as f publicatin date. The prduct cnfrms t specificatins per the terms f the Pletrnics standard warranty. Prductin prcesssing des nt necessarily include testing f all parameters. Cpyright 2009, Pletrnics Inc.
Part Number: SM0T Series Nvember 206 SM0T -8-6.384M -20 E L K -XX See chart belw fr available ptins Operating Temperature Range 0 t +45 C CB 0 t +50 C CC Internal cde r blank Highest Specified Operating Temperature A = 40 C G = 70 C N = 00 C B = 45 C H = 75 C P = 05 C C = 50 C J = 80 C R = 0 C D = 55 C K = 85 C S = 5 C E = 60 C L = 90 C T = 20 C F = 65 C M = 95 C U = 25 C Lwest Specified Operating Temperature A = +0 C F = -5 C L = -40 C B = +5 C G = -20 C M = -45 C C = 0 C H = -25 C N = -50 C D = -5 C J = -30 C P = -55 C E = -0 C K = -35 C Fundamental mde AT cut crystal = Fundamental AT cut crystal rd 3 = 3 Overtne AT cut crystal Frequency Stability See chart belw Calibratin Frequency Tlerance (Typ. Values shwn) 0 = +_ 0 ppm at 25 C +_ 3 C 20 = +_ 20 ppm at 25 C +_ 3 C 30 = +_ 30 ppm at 25 C +_ 3 C (Standard) 50 = +_ 50 ppm at 25 C +_ 3 C Frequency in MHZ Clad in pf Parallel Resnance frm 06 t 32 pf r SR = Series Resnance Mdel Number Available Frequency Stability versus Temperature in ppm A B C D E F G H J K CODE +_ 3.0 +_ 5.0 +_ 8.0 +_ 0 +_ 5 +_ 20 +_ 30 +_ 50 +_ 00 +_ 50!!!!!!!!!!!!!!!!!!!! 0 t +60 C CE!!!!!!!!! 0 t +70 C CG!!!!!! STD!! -0 t +50 C EC!!!!!!!!! -0 t +60 C EE!!!!!!!!! -0 t +75 C EH!!!!!!!! -20 t +70 C GG!!!!!!!! -20 t +75 C GH!!!!!!! -30 t +75 C JH!!!!!!! -30 t +80 C JJ!!!!!!! -30 t +85 C JK!!!!!! -35 t +80 C KJ!!!!!! -40 t +85 C LK!!!!!! -40 t +90 C LL!!!!!! -40 t +05 C LP!!!!! -40 t +25 C LU!!! www.pletrnics.cm 425-776-880 2
SM0T Series Nvember 206 Legacy Part Number (nt fr new designs): SM0T B E -8-23.45M -XX Internal cde r blank Frequency in MHz Clad in pf Parallel Resnance frm 6 t 32 pf r SR = Series Resnance Operating Temperature Range Blank = 0 t + 70 C (STD E = -40 t +85 C Calibratin Tlerance / Frequency Stability Blank = 30/50 (STD) B = 30/30 Series Mdel Reliability: Envirnmental Cmpliance Parameter Cnditin Mechanical Shck MIL-STD-883 Methd 2002, Cnditin B Vibratin MIL-STD-883 Methd 2007, Cnditin A Slderability MIL-STD-883 Methd 2003 Thermal Shck MIL-STD-883 Methd 0, Cnditin A Package Labeling Label is " x 2.6" (25.4mm x 66.7mm) Label is " x 2.6" (25.4mm x 66.7mm) Fnt is Curier New Fnt is Arial Bar cde is 39-Full ASCII www.pletrnics.cm 425-776-880 3
SM0T Series Nvember 206 Mechanical: Inches mm A 0.098 +_ 0.004 2.5 +_ 0.5 B 0.26 +_ 0.004 3.2 +_ 0.5 C 0.028 max 0.7 max D 0.028 t 0.03 0.7 t 0.8 E 0.004 0. F A - (2 * (D + E)) The chamfered pad may r may nt be present and may be n any pad Cntacts : Gld.8 µinches 0.3 µm minimum ver Nickel 50 t 350 µinches.27 t 8.89 µm Cnnectin (tp view): Nt t Scale Typical dimensins G 0.035 0.9 H 0.047.2 J 0.004 0. Marking: P = Pletrnics ff.ffm r ff.f = Frequency ymd r ym = Year Mnth Day r Year Mnth, see cde belw z = Internal infrmatin Orientatin f marking may be mixed n the tape Traceability f part is lst nce remved frm reel Pad 2 and Pad 4 are cmmn and cnnected t the metal cver. They are nt cnnected t the crystal. Cnnected t grund is recmmended The crystal is symmetrical, there is n Pad preference. The part can be rtated 80 when being assembled n the PCB and will still perfrm crrectly. Pff.ffM ymdz OR OR ff.ffm Pymdz ff.fym Cdes fr Date Cde YMD Cde 3 4 5 6 7 Cde A B C D E F G H J K L M Year 203 204 205 206 207 Mnth JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Cde 2 3 4 5 6 7 8 9 A B C D E F G Day 2 3 4 5 6 7 8 9 0 2 3 4 5 6 Cde H J K L M N P R T U V W X Y Z Day 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 www.pletrnics.cm 425-776-880 4
SM0T Series Nvember 206 Reflw Cycle (typical fr lead free prcessing) The part may be reflwed 2 times withut degradatin. Tape and Reel: available fr quantities f 250 t 3000 per reel (<000 will be cut tape) Cnstant Dimensins Table Tape Size D0 D Min E P0 P2 S Min T T 8mm.0 2mm.5.5.75 4.0 2.0 +_0.05 6mm +0..5 +_0. +_0. 2.0 +_0. 24mm.5 0.6 0.25 0. Variable Dimensins Table 2 Tape Size B E2 Min F P T2 W A, B & K 8 mm 3.5 6.4.7 +_0. 4.0 +_0..0 8.9 Nte Nte : Embssed cavity t cnfrm t EIA-48-B Dimensins in mm Nt t scale REEL DIMENSIONS A inches 7.0 0.0 3.0 mm 77.8 254.0 330.2 B inches 2.50 4.00 3.75 mm 63.5 0.6 95.3 Tape Width C mm 3.0 +0.5 / -0.2 D mm 8.4 +2.0 8.4 +2.0 8.4 +2.0 8.0 Reel dimensins may vary frm the abve www.pletrnics.cm 425-776-880 5
SM0T Series Nvember 206 IMPORTANT NOTICE Pletrnics Incrprated (PLE) reserves the right t make crrectins, imprvements, mdificatins and ther changes t this prduct at anytime. PLE reserves the right t discntinue any prduct r service withut ntice. Custmers are respnsible fr btaining the latest relevant infrmatin befre placing rders and shuld verify that such infrmatin is current and cmplete. All prducts are sld subject t PLE s terms and cnditins f sale supplied at the time f rder acknwledgment. PLE warrants perfrmance f this prduct t the specificatins applicable at the time f sale in accrdance with PLE s limited warranty. Testing and ther quality cntrl techniques are used t the extent PLE deems necessary t supprt this warranty. Except where mandated by specific cntractual dcuments, testing f all parameters f each prduct is nt necessarily perfrmed. PLE assumes n liability fr applicatin assistance r custmer prduct design. Custmers are respnsible fr their prducts and applicatins using PLE cmpnents. T minimize the risks assciated with the custmer prducts and applicatins, custmers shuld prvide adequate design and perating safeguards. PLE prducts are nt designed, intended, authrized r warranted t be suitable fr use in life supprt applicatins, devices r systems r ther critical applicatins that may invlve ptential risks f death, persnal injury r severe prperty r envirnmental damage. Inclusin f PLE prducts in such applicatins is understd t be fully at the risk f the custmer. Use f PLE prducts in such applicatins requires the written apprval f an apprpriate PLE fficer. Questins cncerning ptential risk applicatins shuld be directed t PLE. PLE des nt warrant r represent that any license, either express r implied, is granted under any PLE patent right, cpyright, artwrk r ther intellectual prperty right relating t any cmbinatin, machine r prcess which PLE prduct r services are used. Infrmatin published by PLE regarding third-party prducts r services des nt cnstitute a license frm PLE t use such prducts r services r a warranty r endrsement theref. Use f such infrmatin may require a license frm a third party under the patents r ther intellectual prperty f the third party, r a license frm PLE under the patents r ther intellectual prperty f PLE. Reprductin f infrmatin in PLE data sheets r web site is permissible nly if the reprductin is withut alteratin and is accmpanied by assciated warranties, cnditins, limitatins and ntices. Reprductin f this infrmatin with alteratin is an unfair and deceptive business practice. PLE is nt respnsible r liable fr such altered dcuments. Resale f PLE prducts r services with statements different frm r beynd the parameters stated by PLE fr that prduct r service vids all express and implied warranties fr the assciated PLE prduct r service and is an unfair r deceptive business practice. PLE is nt respnsible fr any such statements. Cntacting Pletrnics Inc. Pletrnics Inc. Tel: 425-776-880 th 903 36 Ave. West Fax: 425-776-2760 Lynnwd, WA 98036-576 USA E-mail: ple-sales@pletrnics.cm URL: www.pletrnics.cm Cpyright 2006, 2007, 2008, 2009 Pletrnics Inc. www.pletrnics.cm 425-776-880 6