Insert labels and insert caps Clear, illuminated and indicator lights can be fitted with insert labels and caps for identification purposes. These labels and caps are made of a semi-transparent molded plastic with black lettering and can be fitted in any 90 position. The inscription (and the custom inscription) has capital initial letters. The symbols (incl. those not listed here) are in accordance with DIN. Consecutive No. acc. to DIN Insert labels Insert caps Insert caps Pack for flat for raised for light indicators Unit Without inscription 3SB29 0 4AA.00 3SB29 0 5AA.0 3SB29 0 7AA.0 On 3SB29 0 4EB.0 Start 3SB29 0 4EK.0 Stop 3SB29 0 4EL.0 Reset 3SB29 0 4EM.0 Test 3SB29 0 4EN.0 0 3SB29 0 4RA.0 3SB29 0 5RA.30 3SB29 0 4RB.0 3SB29 0 5RB.30 2 3SB29 0 4RC.0 3SB29 0 5RC.30 3 3SB29 0 4RD.0 3SB29 0 5RD.30 4 3SB29 0 4RE.0 3SB29 0 5RE.30 5 3SB29 0 4RF.0 3SB29 0 5RF.30 6 3SB29 0 4RG.0 3SB29 0 5RG.30 7 3SB29 0 4RH.0 3SB29 0 5RH.30 8 3SB29 0 4RJ.0 3SB29 0 5RJ.30 9 3SB29 0 4RK.0 3SB29 0 5RK.30 Symbols Off 5 3SB29 0 4MB.0 3SB29 0 5MB.30 On 6 3SB29 0 4MC.0 3SB29 0 5MC.30 3SB29 0 4MD.0 Equipment symbols Electric motor 42 3SB29 0 4PA.0 Horn 55 3SB29 0 4PB.0 Pump 695 3SB29 0 4PD.0 3SB29 0 7PD.30 Coolant pump 73 3SB29 0 4PE.0 0/2 Discount Code: Pilot Devices
Insert labels and insert caps Symbol Significance Motion symbols Motion in direction of arrow Motion in direction of arrow Consecutive No. acc. to DIN Insert labels Insert caps Insert caps Pack for flat for raised for light indicators 28 3SB29 0 4NA.0 3SB29 0 5NA.30 28 b 3SB29 0 4NB.0 3SB29 0 5NB.30 Clockwise rotation 00 3SB29 0 4NC.0 Unit Anticlockwise rotation 4 3SB29 0 4ND.0 Fast motion 99 3SB29 0 4NE.0 Increase, plus 40 3SB29 0 4NG.0 3SB29 0 5NG.30 Decrease, minus 4 3SB29 0 4MC.0 3SB29 0 5MC.30 Control symbols Clamp 259 3SB29 0 4QB.0 3SB29 0 5QB.30 Release 69 3SB29 0 4QC.0 3SB29 0 5QC.30 3SB29 0 7QC.30 Brake off 266 3SB29 0 4QE.0 Key-operated switch 46 3SB29 0 4QF.0 Unlock 45 3SB29 0 4QG.0 3SB29 0 5QG.30 On/Off, momentary contact 9 3SB29 0 4QJ.0 Manual operation 35 3SB29 0 4QK.0 3SB29 0 7QK.30 Automatic sequence 267 3SB29 0 4QL.0 3SB29 0 5QL.30 Further symbols acc. to DIN Technical Append to the order code and add the consecutive number to DIN (special characters on request) Labels and caps with inscriptions and symbols not listed above: One line with a maximum of 6 letters is possible, with 3 mm letter height. Supplement the with the following Order Code: Capital initial letters K0Y Capital letters KY Lower-case letters K2Y Acc. to the order K9Y 3SB29 0 4AZ 3SB29 0 4AZ 3SB29 0 5AZ 3SB29 0 5AZ 3SB29 0 7AZ 3SB29 0 7AZ When ordering using the order code, specify the required inscription in plain text. Discount Code: Pilot Devices 0/3
with backing plates The backing plates consist of a black molded plastic holder and an adhesive inscription plate (silver with black). The inscription (and the special inscription) is lower-case with initial capitals. Note insert dimensions! plate Snap-on Version Pack Unit Backing plate for inscription plate 3SB29 02 0AB.00 Adhesive inscription plate ) 9.5 8.5 mm blank 3SB29 0 2AA 0.80 On 3SB29 0 2EB.0 Off 3SB29 0 2EC.0 Start 3SB29 0 2EL.0 Reset 3SB29 0 2EM.0 Fault 3SB29 0 2EW.0 Hand Auto 3SB29 0 2BA.0 Hand 0 Auto 3SB29 0 2BE.0 Man 0 Auto 3SB29 0 2ET.0 Symbols O 3SB29 0 2MB.0 I 3SB29 0 2MC.0 O I 3SB29 0 2MF.0 3SB29 0 2NA.0 plates with inscriptions and symbols other than those shown 2 lines with letters each are possible Letter heights:4 mm ( line) 3 mm (2 lines) Supplement the with the following Order Codes: Capital initial letters K0Y Capital letters KY Lower-case letters K2Y Other symbols with No. According to order form K9Y 3SB29 0 2XZ K0Y, KY, K2Y, When ordering, specify the required inscription in plain text in addition to the order number and order code. For further inscriptions, specify the consecutive No. according to DIN. ) Must not be used with the 3SB2... AC0 EMERCENCY STOP mushroom pushbutton unit. 0/4 Discount Code: Pilot Devices
Square design The 3SB2 and indicator lights can be constructed in square design using square frames of black molded plastic in combination with the actuators and lens assemblies. Note insert dimensions! Version Pack Unit Single Frame ) 3SB29 02 0AA 0.60 Accessories and spare parts Version Color Pack Unit Buttons, flat for pushbutton units black 3SB29 0 0AB 0.60 red 3SB29 0 0AC 0.60 yellow 3SB29 0 0AD 0.60 green 3SB29 0 0AE 0.60 blue 3SB29 0 0AF 0.60 white 3SB29 0 0AG 0.60 clear 3SB29 0 0AH 0.60 for illuminated pushbutton units red 3SB29 0 0CC 0.60 yellow 3SB29 0 0CD 0.60 green 3SB29 0 0CE 0.60 blue 3SB29 0 0CF 0.60 white 3SB29 0 0AG 0.60 clear 3SB29 0 0AH 0.60 Buttons, raised for pushbutton units black 3SB29 0-0BB.90 red 3SB29 0-0BC.90 yellow 3SB29 0-0BD.90 clear 3SB29 0-0BH.90 for illuminated pushbutton units red 3SB29 0 0DC.90 yellow 3SB29 0 0DD.90 clear 3SB29 0 0BH.90 Screw lenses with concentric rings red 3SB29 0 AC.00 yellow 3SB29 0 AD.00 green 3SB29 0 AE.00 blue 3SB29 0 AF.00 white 3SB29 0 AG.00 clear 3SB29 0 AH.00 for labelling using insert cap red 3SB29 0 BC.00 yellow 3SB29 0 BD.00 green 3SB29 0 BE.00 blue 3SB29 0 BF.00 clear 3SB29 0 BH.00 Backing plate, 50 mm, yellow as contrast surface, self-adhesive blank 3SB29 08 2AF 3.00 with inscription NOT-AUS 3SB29 08 2AG 3.00 (in German) Key for CES key-operated switch, lock No. SB2 3SB29 08 2AJ 0.30 ) Must not be used with the 3SB2... AC0 EMERCENCY STOP mushroom pushbutton! Discount Code: Pilot Devices 0/5
Accessories and spare parts Version Color Lamp voltage Pack Preferred type Unit Protective cap, clear 3SB29 08-3AB 5.00 Silicone, for pushbutton units with flat and raised pushbutton Incandescent lamps Wedge base W2 x 4.6 d, 6 V 3SB29 08 AA 6.00 0.0 W 2 V 3SB29 08 AB 6.00 24 V 3SB29 08 AC 6.00 30 V 3SB29 08 AD 6.00 48 V 3SB29 08 AE 6.00 60 V 3SB29 08 AF 6.00 LEDs, super-bright Wedge base W2 x 4.6 d red DC 24 V 3SB39 0 SB 5.00 0 yellow 3SB39 0 RB 5.00 green 3SB39 0 TB 5.00 white 3SB39 0 UB 5.00 blue 3SB29 08 BD 5.00 Lamp extractor for lamps with base W2 x 4.6 d 3SB29 08 2AB 5.00 Mounting tool for and screw lenses 3SB29 08 2AC 6.50 Dismounting tool for holder and lamp holder with holder 3SB29 08 2AA 4.00 Blanking plug black plastic (degree of protection IP 65) 3SB29 08 3AA 4.80 50 Push-on ferrule for tab connectors 2.8 x 0.8 mm Cross-section 0.5 to.5 mm 2 3SB29 08 8AA 0.40 250 Insulation sleeve for tab connectors, connection from the front 3SB29 08 8AB 0.40 Complete connector ) for connecting contact blocks and lamp holders (up to 0 connections). Provides safety from fingertouch acc. to DIN VDE 006 Part 00 and VBG 4. Push-on ferrule with locating spring for locating in complete connector 3SB29 08 8AD 0.50 3SB29 08 8AE 0.40 250 ) Required push-on ferrules must be ordered separately. 0/6 Discount Code: Pilot Devices