Phtcupler Prduct Data Sheet MOC3083 SERIES Spec N.: DS70-2001-027 Effective Date: 11/30/2016 Revisin: E LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technlgy Crp. / Optelectrnics N.90,Chien 1 Rad, Chung H, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liten.cm/pt
Phtcupler 1. DESCRIPTION 1.1 Features Islatin vltage between input and utput V is : 5,000V rms 6pin DIP zer-crss ptislatrs triac driver utput High repetitive peak ff-state vltage VDRM : Min. 800V High critical rate f rise f ff-state vltage( dv/dt : MIN. 1000V / s ) Dual-in-line package : MOC3081 / MOC3082 / MOC3083 Wide lead spacing package : MOC3081M / MOC3082M / MOC3083M Surface munting package : MOC3081S / MOC3082S / MOC3083S Tape and reel packaging : MOC3081S-TA1 / MOC3082S-TA1 / MOC3083S-TA1 Safety apprval UL 1577 cul CA5A VDE DIN EN60747-5-5 (VDE 0884-5) RHS Cmpliance All materials be used in device are fllwed EU RHS directive (N.2002/95/EC). MSL class1 1.2 Applicatins AC Mtr Drives AC Mtr Starters E.M. Cntactrs Lighting Cntrls Slenid/Valve Cntrls Slid State Relays Static Pwer Switches Temperature Cntrls 1/11 Part N.:
Phtcupler 2. PACKAGE DIMENSIONS 2.1 MOC308X 2.2 MOC308XM 2.3 MOC308XS Ntes : 1. Year date cde. 2. 2-digit wrk week. 3. Factry identificatin mark shall be marked (W: China-CZ, Y: Thailand) 4. VDE ptin 5. I FT rank * Dimensins are in Millimeters and (Inches). 2/11 Part N.:
Phtcupler 3. TAPING DIMENSIONS 3.1 MOC308XS-TA 3.2 MOC308XS-TA1 Descriptin Symbl Dimensin in mm (inch) Tape wide W 16±0.3 (0.63) Pitch f sprcket hles P 0 4±0.1 (0.15) Distance f cmpartment Distance f cmpartment t cmpartment F 7.5±0.1 (0.295) P 2 2±0.1 (0.079) P 1 12±0.1 (0.472) 3.3 Quantities Per Reel Package Type MOC308XS series Quantities (pcs) 1000 3/11 Part N.:
Phtcupler 4. RATING AND CHARACTERISTICS 4.1 Abslute Maximum Ratings at Ta=25 C Parameter Symbl Rating Unit Frward Current I F 50 ma Input Reverse Vltage V R 6 V Junctin Temperature T J 125 C Pwer Dissipatin P 120 mw Off-State Output Terminal Vltage V DRM 800 V On-State RMS Current I D(RMS) 100 ma Output Peak Repetitive Surge Current ( PW=1ms, 120pps ) I TSM 1 A Junctin Temperature T J 125 C Cllectr Pwer Dissipatin P C 150 mw Ttal Pwer Dissipatin P tt 250 mw 1. Islatin Vltage V is 5000 V rms Operating Temperature T pr -40 ~ +110 Strage Temperature T stg -55 ~ +150 2. Sldering Temperature T sl 260 C C C 1. AC Fr 1 Minute, R.H. = 40 ~ 60% Islatin vltage shall be measured using the fllwing methd. (1) Shrt between ande and cathde n the primary side and between cllectr and emitter n the secndary side. (2) The islatin vltage tester with zer-crss circuit shall be used. (3) The wavefrm f applied vltage shall be a sine wave. 2. Fr 10 Secnds 4/11 Part N.:
Phtcupler 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25 C Input Parameter Symb l Min. Typ. Max. Unit Test Cnditin Frward Vltage V F 1.2 1.4 V I F=20mA Reverse Current I R 0.05 10 A V R=6V 1 Peak Blcking Current, Either Directin I DRM 500 na V DRM = 800V Output Peak On-State Vltage, Either Directin V TM 3.0 V I TM=100 ma Peak 2 Critical rate f Rise f Off-State Vltage dv/dt 1000 V/ s Vin=240Vrms Led Trigger Current, MOC3081 15 Cuple 3 Current Required t Latch Output, Either Directin I FT MOC3082 10 MOC3083 5 ma Main Terminal Vltage = 3V Hlding Current, Either Directin I H 400 A ZERO CROSSING Inhibit Vltage V INH 5 20 Vlts Leakage in Inhibited State I DRM2 500 A I F=Rated I FT, MT1-MT2 Vltage abve which device will nt trigger. I F = Rated I FT, Rated V DRM, Off State *1. Test vltage must be applied within dv/dt rating. *2. This is static dv/dt. Cmmutating dv/dt is a functin f the lad-driving thyristr(s) nly. *3. All devices are guaranteed t trigger at an I F value less than r equal t max I FT. Therefre, recmmended perating I F lies between max I FT, 15 ma fr MOC3081, 10 ma fr MOC3082, 5 ma fr MOC3083, and abslute max I F (50mA). 5/11 Part N.:
5. CHARACTERISTICS CURVES (TYPICAL PERFORMANCE) Phtcupler Fig.1 Frward Current vs. Ambient Temperature Fig.2 On-state Current vs. Ambient Temperature On-state vltage VTM(V) Minimum trigger current IFT (ma) Frward current IF (ma) 60 50 40 30 20 10 0-40 0-20 0 20 40 60 80 100 120-40 -20 0 20 40 60 80 100 120 Ambient temperature Ta ( C) Ambient temperature Ta ( C) Fig.3 Minimum Trigger Current vs. Ambient Temperature 10 8 6 4 2 0 20 Ambient temperature ( C) Fig.5 On-state Vltage vs. Ambient Temperature 3.0 2.6 2.2 1.8 1.4 40 60 VP= 6V RL= 100 80 ITM= 100mA 100 I TM, n-state current (A) 0.10 0.05 Fig.4 Frward Current vs. Frward Vltage Frward current IF (ma) 100 10 1 0.4 Fig.6 Hlding Current vs. Ambient Temperature Frward current IH (ma) 1 0.1 80 C 100 C 0.8 1.2 1.6 Frward vltage VF (V) 60 C 40 C 20 C VP= 6V 2.0 1.0 20 40 60 80 100 0.01 20 40 60 80 100 Ambient temperature Ta ( C) Ambient Temperature Ta ( C) 6/11 Part N.:
Phtcupler 7/11 Part N.:
Temperature ( C) 6. TEMPERATURE PROFILE OF SOLDERING 6.1 IR Reflw sldering (JEDEC-STD-020C cmpliant) Phtcupler One time sldering reflw is recmmended within the cnditin f temperature and time prfile shwn belw. D nt slder mre than three times. Prfile item Cnditins Preheat - Temperature Min (T Smin) - Temperature Max (T Smax) - Time (min t max) (ts) 150 C 200 C 90±30 sec Sldering zne - Temperature (T L) - Time (t L) Peak Temperature (T P) Ramp-up rate Ramp-dwn rate 217 C 60 sec 260 C 3 C / sec max. 3~6 C / sec Ramp-up TL 217 C Tsmax 200 C 20 sec TP 260 C Ramp-dwn Tsmin 150 C 60 sec tl (Sldering) 25 C 60 ~ 120 sec ts (Preheat) 35~70 sec Time (sec) 8/11 Part N.:
6.2 Wave sldering (JEDEC22A111 cmpliant) One time sldering is recmmended within the cnditin f temperature. Phtcupler Temperature: 260+0/-5 C Time: 10 sec. Preheat temperature:25 t 140 C Preheat time: 30 t 80 sec. 6.3 Hand sldering by sldering irn Allw single lead sldering in every single prcess. One time sldering is recmmended. Temperature: 380+0/-5 C Time: 3 sec max. 9/11 Part N.:
7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Phtcupler Unit: mm 10/11 Part N.:
8. NAMING RULE MOC308(X)(1)-(2) Phtcupler DEVICE PART NUMBER (MOC308X) Please refer t Electrical Optical Characteristics Table n Page P5 (1) FORM TYPE (S, M r nne) (2) TAPING TYPE (TA, TA1) Example : MOC3081S-TA1 MOC308(X)(1)(2)-V DEVICE PART NUMBER (MOC308X) Please refer t Electrical Optical Characteristics Table n Page P5 (1) FORM TYPE (S, M r nne) (2) TAPING TYPE (TA, TA1) (3) VDE ptin Example : MOC3081STA1-V 9. NOTES LiteOn is cntinually imprving the quality, reliability, functin r design and LiteOn reserves the right t make changes withut further ntices. The prducts shwn in this publicatin are designed fr the general use in electrnic applicatins such as ffice autmatin equipment, cmmunicatins devices, audi/visual equipment, electrical applicatin and instrumentatin. Fr equipment/devices where high reliability r safety is required, such as space applicatins, nuclear pwer cntrl equipment, medical equipment, etc, please cntact ur sales representatives. When requiring a device fr any specific applicatin, please cntact ur sales in advice. If there are any questins abut the cntents f this publicatin, please cntact us at yur cnvenience. The cntents described herein are subject t change withut prir ntice. Immerge unit s bdy in slder paste is nt recmmended. 11/11 Part N.:
Muser Electrnics Authrized Distributr Click t View Pricing, Inventry, Delivery & Lifecycle Infrmatin: Lite-On: MOC3083M MOC3083S-TA1 MOC3083S MOC3083