SD00C..R SERIES STANDARD RECOVERY DIODES Hockey Puk Version Features Wide current range High voltage ratings up to 00V High surge current capabilities Diffused junction Hockey Puk version Case style B-44 (R-PUK) 44A Typical Applications Converters Power supplies High power drives Auxiliary system supplies for traction applications case style B-44 (R-PUK) Major Ratings and Characteristics Parameters SD00C..R Units I F(AV) 44 A @ T hs 55 C I F(RMS) 70 A @ T hs 25 C I FSM @ Hz 57300 A @ Hz 000 A I 2 t @ Hz 16430 KA2 s @ Hz KA 2 s V RRM range 3000 to 00 V T J - to 1 C 1
ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage V RRM, maximum repetitive V RSM, maximum non- I RRM max. Type number Code peak reverse voltage repetitive peak rev. voltage @ T J = 1 C V V ma 30 3000 3 34 30 30 SD00C..R 38 30 30 00 4 Forward Conduction Parameter SD00C..R Units Conditions I F(AV) Max. average forward current 44 (2200) A conduction, half sine wave @ Heatsink temperature 55 (85) C Double side (single side) cooled I F(RMS) Max. RMS forward current 70 A @ 25 C heatsink temperature double side cooled I FSM Max. peak, one-cycle forward, 57300 t = 10ms No voltage non-repetitive surge current 000 t = 8.3ms reapplied 48200 A t = 10ms % V RRM 4 t = 8.3ms reapplied Sinusoidal halfwave, I 2 t Maximum I 2 t for fusing 16430 t = 10ms No voltage Initial T J = T J max. t = 8.3ms reapplied KA 2 s 11615 t = 10ms % V RRM 105 t = 8.3ms reapplied I 2 t Maximum I 2 t for fusing 164300 KA 2 s t = 0.1 to 10ms, no voltage reapplied V F(TO)1 Low level value of threshold 0.830 (16.7% x π x I voltage F(AV) < I < π x I F(AV) ), T J = T J max. V V F(TO)2 High level value of threshold 1.112 (I > π x I F(AV) ),T J = T J max. voltage r Low level value of forward f1 0.101 (16.7% x π x I F(AV) < I < π x I F(AV) ), T J = T J max. slope resistance mω r High level value of forward f2 0.071 (I > π x I F(AV) ),T J = T J max. slope resistance V FM Max. forward voltage drop 1.44 V I = 00A, T pk J = T J max, t = 10ms sinusoidal wave p 2
Thermal and Mechanical Specifications Parameter SD00C..R Units Conditions T J Max. junction operating temperature range - to 1 T stg Max. storage temperature range -55 to 200 C R thj-hs Max. thermal resistance, junction 0.02 K/W DC operation single side cooled to heatsink 0.01 DC operation double side cooled F Mounting force, ± 10% 39200 N (00) (Kg) wt Approximate weight 15 g Case style B-44 (R-PUK) See Outline Table R thj-hs Conduction (The following table shows the increment of thermal resistence R thj-hs when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction Units Conditions Single Side Double Side Single Side Double Side 0.0009 0.0010 0.0006 0.0006 0.0010 0.0011 0.0010 0.0010 0.0013 0.0013 0.0014 0.0014 K/W T J = T J max. 0.0019 0.0019 0.0020 0.0020 0.0033 0.0033 0.0034 0.0034 Ordering Information Table Device Code SD 0 0 C R 1 2 3 4 5 6 1 - Diode 2 - Essential part number 3-0 = Standard recovery 4 - C = Ceramic Puk 5 - Voltage code: code x = V RRM (see Voltage Ratings Table) 6 - R = Puk Case B-44 (R-PUK) 3
Outline Table 3.5 (0.14) DIA. NOM. x 2.5 (0.10) DEEP MIN. BOTH ENDS 111 (4.37) DIA. MAX. 0.8 (0.03) MIN. BOTH ENDS 73.2 (2.88) DIA. MAX. TWO PLACES 37.2 (1.46) 36.2 (1.43).5 (3.96) DIA. MAX. Case Style B-44 (R-PUK) All dimensions in millimeters (inches) Quote between upper and lower pole pieces has to be considered after application of Mounting Force (see Thermal and Mechanical Specification) Maximum Allowable Heatsink Temperature ( C ) 1 SD00C..R Series 1 (Single Side C ooled) R thj-hs (D C ) = 0.02 K/W Conduction Angle 0 0 0 10 2000 20 3000 30 M aximum Allow able Heatsink Tem perature ( C) 1 1 30 20 SD00C..R Series (Single Side C ooled) R thj-hs (D C ) = 0.02 K/W Conduction Period DC 0 0 2000 3000 00 00 A verag e Fo rw ard C urrent (A ) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics 4
Maximum Allowable Heatsink Temperature ( C) 1 SD 00C..R Series 1 (Double Side Cooled) R thj-h s (DC) = 0.01 K/W Conduction Angle 30 0 0 2000 3000 00 00 Maximum Allowable Heatsink Tem perature ( C) 1 1 30 20 SD 00 Series (Double Side Cooled) R (D C ) = 0.01 K/W th J-hs Conduction Period DC 0 2000 00 00 00 A verag e Fo rw ard Curre nt (A ) Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) 00 00 00 00 2000 T J = 1 C 0 0 0 2000 3000 00 00 RMS Limit Conduction Angle Fig. 5 - Forward Power Loss Characteristics Maximum Average Forward Power Loss (W) 00 00 00 00 2000 DC RMS Limit Conduction Period T = 1 C J 0 0 2000 00 00 00 Fig. 6 - Forward Power Loss Characteristics Peak Half Sine Wave Forward Current (A) 500 000 0 000 300 30000 200 20000 1 10 N um b er O f E qua l A m p lit ude Ha lf C yc le C urrent Pulse s (N ) At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T J = 1 C @ Hz 0.0083 s @ Hz 0.0 s SD 00C..R Series Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Peak Half Sine Wave Forward Current (A) 000 500 000 0 000 300 30000 200 20000 M axim um N on Re pe titive Surg e C urrent V ersus Pulse Train D uratio n. In itial T J = 1 C No Voltage Reapplied Rate d V Reapplie d RRM 0.01 0.1 1 P ulse Tra in D ura tion ( s) Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 5
0 Instantaneous Forward Current (A) T = 25 C J T = 1 C J 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Instantaneous Forward Voltage (V) Fig. 9 - Forward Voltage Drop Characteristics Tran sient The rm al Im pe dance Z thj-hs (K/W ) 0.1 0.01 0.001 Steady State V alue R = 0.02 K/W thj-hs (Single Side C ooled) R thj-hs = 0.01 K/W (Double Side Cooled) (D C Operation ) SD00C..R Series 0.0001 0.001 0.01 0.1 1 10 Sq u ar e W a ve P ulse D u rat io n (s) Fig. 10 - Thermal Impedance Z thj-hs Characteristics 6