Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low ESR in smaller case sizes than the 36 RVI series Excellent ripple current capability AEC-Q200 qualified Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with pressure relief, insulated with a blue sleeve Charge and discharge proof Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 048 RML 48 RUS lower longer life Fig. APPLICATIONS Power supplies (SMPS, DC/DC converters) for general industrial, EDP, audio-video, automotive, and telecommunications Smoothing, filtering, buffering QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes ( in mm) 8 x 2 to 8 x 40 Rated capacitance range, C R 22 μf to 8200 μf Tolerance on C R ± 20 % Rated voltage range, U R 0 V to 00 V Category temperature range -55 C to +05 C Endurance test at 05 C 3000 h to 6000 h Useful life at 05 C 4000 h to 0 000 h Useful life at 40 C,.8 x I R applied 200 000 h to 500 000 h Shelf life at 0 V, 05 C 000 h Based on sectional specification IEC 60384-4 / EN30300 Climatic category IEC 60068 55 / 05 / 56 MARKING The capacitors are marked (where possible) with the following information: Rated capacitance (in μf) Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) Rated voltage (in V) Date code, in accordance with IEC 60062 Code indicating factory of origin Name of manufacturer Upper category temperature (05 C) Negative terminal identification Series number (50) SELECTION CHART FOR C R, U R, AND RELEVANT NOMINAL CASE SIES ( in mm) C R U R (V) (μf) 0 6 25 35 50 63 00 22 - - - - - - 8 x 2 47 - - - - - 8 x 2-00 - - - 8 x 2-0 x 2-50 - - - - 0 x 2 0 x 6-220 - 8 x 2 8 x 2 8 x 5 0 x 6 0 x 20 - - - - 0 x 2 - - - 330-8 x 2 0 x 2 0 x 6 0 x 20 2.5 x 20 8 x 20 470 8 x 2 8 x 5 0 x 6 0 x 20 2.5 x 20 2.5 x 25 - - 0 x 2 - - - 6 x 20-680 0 x 2 0 x 6 0 x 20 2.5 x 20 2.5 x 25 6 x 20 - - - - - - 6 x 25-000 0 x 6 0 x 20 2.5 x 20 2.5 x 25 6 x 25 6 x 3 - - - - 6 x 20 - - - 200 - - - - 6 x 3 - - 500-2.5 x 20 2.5 x 25 6 x 20 6 x 3 - - - - - 2.5 x 35 - - - 2200 2.5 x 20 2.5 x 25 6 x 20 6 x 3-8 x 40 - - - 2.5 x 35 - - - - 3300 2.5 x 25 6 x 20 6 x 3 8 x 3 8 x 40 - - 4700 6 x 25 6 x 3 6 x 35 8 x 40 - - - 6800 6 x 3 6 x 35 8 x 40 - - - - 8200-8 x 40 - - - - - Revision: 06-Oct-6 Document Number: 28323 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
DIMENSIONS in millimeters AND AVAILABLE FORMS Ø D Ø D L L + - F 5 min. 4 0 Ø d Ø d 5 min. F Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads Formed leads for Ø D = 8 mm with pitch F = 5 mm Fig. 4 - Form TFA: Taped in box (ammopack) Table DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIE CASE CODE Ø d Ø D max. L max. F MASS (g) PACKAGING QUANTITIES FORM CA FORM CB 8 x 2 3 0.6 8.5 3.0 3.5 ± 0.5. 5000 5000 000 8 x 5 3L 0.6 8.5 6.0 3.5 ± 0.5.3 5000 5000 000 0 x 2 4 0.6 0.5 3.5 5.0 ± 0.5.6 000 500 800 0 x 6 5 0.6 0.5 7.5 5.0 ± 0.5.9 500 500 800 0 x 20 6 0.6 0.5 22.0 5.0 ± 0.5 2.2 500 500 800 2.5 x 20 7 0.6 3.0 22.0 5.0 ± 0.5 4.0 500 500 500 2.5 x 25 8 0.6 3.0 27.0 5.0 ± 0.5 5.0 250 250 500 2.5 x 35 8LL 0.6 3.0 37.5 5.0 ± 0.5 6.0 250 250-6 x 20 9a 0.8 6.5 22.0 7.5 ± 0.5 6.0 250 250 250 6 x 25 9 0.8 6.5 27.0 7.5 ± 0.5 8.0 250 250 250 6 x 3 20 0.8 6.5 33.5 7.5 ± 0.5 9.0 00 00 250 6 x 35 2 0.8 6.5 37.5 7.5 ± 0.5.0 00 00-8 x 20 820 0.8 8.5 22.0 7.5 ± 0.5 8.0 00 00-8 x 3 83 0.8 8.5 33.5 7.5 ± 0.5 2.5 00 00-8 x 40 840 0.8 8.5 42.5 7.5 ± 0.5 6.5 00 00 - FORM TFA Revision: 06-Oct-6 2 Document Number: 28323 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
ELECTRICAL DATA SYMBOL DESCRIPTION C R Rated capacitance at 00 Hz, tolerance ± 20 % I R Rated RMS ripple current at 00 khz, 05 C I L2 Max. leakage current after 2 min at U R tan Max. dissipation factor at 00 Hz Max. impedance at 00 khz Note Unless otherwise specified, all electrical values in Table 2 apply at T amb = 20 C, P = 86 kpa to 06 kpa, RH = 45 % to 75 %. ORDERING EXAMPLE Electrolytic capacitor 50 series 470 μf / 6 V; ± 20 % Nominal case size: Ø 0 mm x 2 mm; Form TFA Ordering Code: MAL2503547E3 Former 2NC: 2222 50 3547 Table 2 ELECTRICAL DATA AND ORDERING INFORMATION U R (V) 0 6 25 35 C R 00 Hz (μf) NOMINAL CASE SIE (mm) I R 00 khz 05 C (ma) I L2 2 min (μa) tan 00 Hz 00 khz +20 C () 00 khz -40 C () ORDERING CODE MAL250... BULK PACKAGING TAPED FORM CA FORM CB FORM TFA 470 8 x 2 555 47 0.9 0.7 0.870 5447E3 8447E3 3447E3 680 0 x 2 730 7 0.9 0.097 0.680 5468E3 6468E3 3468E3 000 0 x 6 950 03 0.9 0.066 0.460 5402E3 6402E3 3402E3 2200 2.5 x 20 460 223 0.2 0.037 0.260 54222E3 64222E3 34222E3 3300 2.5 x 25 950 333 0.2 0.029 0.200 54332E3 64332E3 34332E3 4700 6 x 25 2390 473 0.23 0.022 0.50 54472E3 64472E3 34472E3 6800 6 x 3 2890 683 0.25 0.09 0.30 54682E3 64682E3 34682E3 220 8 x 2 555 35 0.6 0.7 0.870 5522E3 8522E3 3522E3 330 8 x 2 555 53 0.6 0.7 0.870 5533E3 8533E3 3533E3 470 8 x 5 730 78 0.6 0.085 0.750 95475E3 95478E3 95473E3 470 0 x 2 730 78 0.6 0.097 0.680 5547E3 6547E3 3547E3 680 0 x 6 950 2 0.6 0.066 0.460 5568E3 6568E3 3568E3 000 0 x 20 80 63 0.6 0.049 0.340 5502E3 6502E3 3502E3 500 2.5 x 20 460 243 0.6 0.037 0.260 5552E3 6552E3 3552E3 2200 2.5 x 25 950 355 0.8 0.029 0.200 55222E3 65222E3 35222E3 3300 6 x 20 840 53 0.20 0.028 0.200 55332E3 65332E3 35332E3 4700 6 x 3 2890 755 0.22 0.09 0.30 55472E3 65472E3 35472E3 6800 6 x 35 300 09 0.24 0.08 0.30 55682E3 65682E3-8200 8 x 40 3500 35 0.28 0.08 0.30 55822E3 65822E3-220 8 x 2 555 55 0.4 0.7 0.870 5622E3 8622E3 3622E3 330 0 x 2 730 86 0.4 0.097 0.680 5633E3 6633E3 3633E3 470 0 x 6 950 2 0.4 0.066 0.460 5647E3 6647E3 3647E3 680 0 x 20 80 73 0.4 0.049 0.340 5668E3 6668E3 3668E3 000 2.5 x 20 460 253 0.4 0.037 0.260 5602E3 6602E3 3602E3 500 2.5 x 25 950 378 0.4 0.029 0.200 5652E3 6652E3 3652E3 2200 2.5 x 35 250 553 0.6 0.028 0.200 96225E3 96226E3-2200 6 x 20 840 553 0.6 0.028 0.200 56222E3 66222E3 36222E3 3300 6 x 3 2890 828 0.6 0.09 0.30 56332E3 66332E3 36332E3 4700 6 x 35 300 78 0.8 0.08 0.30 56472E3 66472E3-6800 8 x 40 3500 703 0.22 0.08 0.30 56682E3 66682E3-00 8 x 2 555 35 0.2 0.7 0.870 500E3 800E3 300E3 220 8 x 5 730 77 0.2 0.085 0.750 90225E3 90228E3 90223E3 220 0 x 2 730 80 0.2 0.097 0.680 5022E3 6022E3 3022E3 330 0 x 6 950 8 0.2 0.066 0.460 5033E3 6033E3 3033E3 470 0 x 20 80 67 0.2 0.049 0.340 5047E3 6047E3 3047E3 680 2.5 x 20 460 24 0.2 0.037 0.260 5068E3 6068E3 3068E3 000 2.5 x 25 950 353 0.2 0.029 0.200 5002E3 6002E3 3002E3 000 6 x 20 840 353 0.2 0.028 0.200 9005E3 9006E3 9003E3 500 2.5 x 35 250 528 0.2 0.028 0.200 9086E3 9087E3-500 6 x 20 840 528 0.2 0.028 0.200 5052E3 6052E3 3052E3 2200 6 x 3 2890 773 0.4 0.09 0.30 50222E3 60222E3 30222E3 3300 8 x 3 3000 55 0.6 0.09 0.30 50332E3 60332E3-4700 8 x 40 3300 648 0.8 0.08 0.30 50472E3 60472E3 - Revision: 06-Oct-6 3 Document Number: 28323 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
ELECTRICAL DATA AND ORDERING INFORMATION U R (V) 50 63 00 C R 00 Hz (μf) NOMINAL CASE SIE (mm) I R 00 khz 05 C (ma) I L2 2 min (μa) tan 00 Hz 00 khz +20 C () 00 khz -40 C () ORDERING CODE MAL250... BULK PACKAGING TAPED FORM CA FORM CB FORM TFA 50 0 x 2 500 78 0.0 0.200.400 55E3 65E3 35E3 220 0 x 6 700 3 0.0 0.20 0.840 522E3 622E3 322E3 330 0 x 20 900 68 0.0 0.090 0.630 533E3 633E3 333E3 470 2.5 x 20 00 238 0.0 0.062 0.430 547E3 647E3 347E3 680 2.5 x 25 400 343 0.0 0.048 0.340 568E3 668E3 368E3 000 6 x 25 800 503 0.0 0.034 0.240 502E3 602E3 302E3 200 6 x 3 2200 603 0.0 0.027 0.90 522E3 622E3 322E3 500 6 x 3 2200 753 0.0 0.027 0.90 552E3 652E3 352E3 3300 8 x 40 3200 653 0.4 0.024 0.68 5332E3 6332E3-47 8 x 2 405 30 0.09 0.342 2.350 58479E3 88479E3 38479E3 00 0 x 2 420 66 0.0 0.270.890 580E3 680E3 380E3 50 0 x 6 560 97 0.0 0.90.330 585E3 685E3 385E3 220 0 x 20 700 4 0.0 0.50.050 5822E3 6822E3 3822E3 330 2.5 x 20 930 2 0.0 0.095 0.670 5833E3 6833E3 3833E3 470 2.5 x 25 200 299 0.0 0.067 0.470 5847E3 6847E3 3847E3 470 6 x 20 00 299 0.0 0.074 0.520 98475E3 98476E3 98473E3 680 6 x 20 00 43 0.0 0.074 0.520 5868E3 6868E3 3868E3 680 6 x 25 500 43 0.0 0.054 0.380 98685E3 98686E3 98683E3 000 6 x 3 900 633 0.0 0.042 0.295 5802E3 6802E3 3802E3 2200 8 x 40 300 389 0.2 0.033 0.23 58222E3 68222E3-22 8 x 2 230 22 0.08 0.68 27.0 59229E3 89229E3 39229E3 330 8 x 20 700 330 0.07 0.074 2.0 9083E3 9085E3 - ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage U s.5 x U R Reverse voltage U rev V Current Leakage current After 2 min at U R I L2 0.0 C R x U R + 3 μa Inductance Equivalent series inductance (ESL) Case Ø D 0 mm Typ. 6 nh Case Ø D 2.5 mm Typ. 8 nh Resistance Equivalent series resistance (ESR) Calculated from tan max. and C R (see Table 2) ESR = tan /2f C R CAPACITANCE (C) C C 0.2..0.2 C C 0.0 0.8 0.6 2 0.9 0.4 0.2 Curve : U R 35 V Curve 2: U R 50 V 0.8-60 - 40-20 0 20 40 60 80 00 20 40 C 0 = Typical capacitance at 20 C, 00 Hz T amb ( C) Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature 0 0 0 2 0 3 0 4 f (Hz) 0 5 T amb 20 C C 0 = Typical capacitance at 20 C, 00 Hz Fig. 6 - Typical multiplier of capacitance as a function of frequency Revision: 06-Oct-6 4 Document Number: 28323 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
EQUIVALENT SERIES RESISTANCE (ESR) ESR ESR 0 0 6 ESR ESR 0 5 Curve : Ø D 2.5 mm Curve 2: Ø D 6 mm 4 3 2 2-60 - 40-20 0 20 40 60 80 00 20 40 ESR 0 = Typical ESR at 20 C, 00 Hz T amb ( C) Fig. 7 - Typical multiplier of ESR as a function of ambient temperature IMPEDANCE () 0 0 0 2 0 3 0 4 f (Hz) 0 5 ESR 0 = Typical ESR at 20 C, 00 Hz T amb = 20 C Fig. 8 - Typical multiplier of ESR as a function of frequency 0 2 0 0 3 Curve : 00 µf, 63 V (Ω) Curve 2: 220 µf, 50 V 0 2 Curve 3: 680 µf, 63 V 0 0 2 3 0-0 - - 60-40 - 20 0 20 40 60 80 00 20 40 0 = Typical impedance at 20 C, 00 khz T amb ( C) Fig. 9 - Typical multiplier of impedance as a function of ambient temperature 0-2 0 0 2 0 3 0 4 f (Hz) 0 5 Tamb = 20 C Fig. 0 - Typical impedance as a function of frequency 0 2 (Ω) 0 4 5 2 3 Curve : 330 µf, 35 V Curve 2: 470 µf, 6 V Curve 3: 680 µf, 6 V Curve 4: 000 µf, 6 V Curve 5: 6800 µf, 6 V 0-0 -2 0 0 2 0 3 0 4 f (Hz) 0 5 Tamb = 20 C Fig. - Typical impedance as a function of frequency Revision: 06-Oct-6 5 Document Number: 28323 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE NOMINAL CASE SIE (mm) Note Multiplier of useful life code: CCC206 CASE CODE ENDURANCE AT 05 C (h) USEFUL LIFE AT 05 C (h) 8 x 2 3 3000 4000 8 x 5 3L 3000 4000 0 x 2 4 3000 4000 0 x 6 5 3000 6000 0 x 20 6 3000 6000 2.5 x 20 7 3000 7000 2.5 x 25 8 5000 8000 2.5 x 35 8LL 5000 8000 6 x 20 9a 3000 7000 6 x 25 9 5000 0 000 6 x 3 20 5000 0 000 6 x 35 2 5000 0 000 8 x 20 820 3000 7000 8 x 3 83 6000 0 000 8 x 40 840 8000 0 000 3.8 CCC206 I A I R 3.7 3.6 3.5 3.4 3.3 3.2 3. 3.0 2.8 2.6 Lifetime multiplier I A = Actual ripple current at 00 khz I R = Rated ripple current at 00 khz, 05 C () Useful life at 05 C and I R applied; see Table 4 2.4 2.2 2.0.8.6.4.2.0 0.8 0.5 0.0 50 200 60 00 3.0 4.0 6.0 8.0 2 20 30.5 2.0 40 50 60 70 80 90 00 0 T amb ( C).0 () Fig. 2 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 06-Oct-6 6 Document Number: 28323 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Table 4 MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY NOMINAL CASE SIE FREQUENCY (Hz) 00 300 000 3000 0 000 30 000 00 000 (mm) I R MULTIPLIER 8 x 2 0.65 0.76 0.85 0.89 0.90 0.97.00 8 x 5 0.65 0.76 0.85 0.89 0.90 0.97.00 0 x 2 0.65 0.76 0.85 0.89 0.90 0.97.00 0 x 6 0.65 0.76 0.85 0.89 0.90 0.97.00 0 x 20 0.65 0.76 0.85 0.89 0.90 0.97.00 2.5 x 20 0.65 0.76 0.85 0.89 0.90 0.97.00 2.5 x 25 0.65 0.76 0.85 0.89 0.90 0.97.00 2.5 x 35 0.65 0.76 0.85 0.89 0.90 0.97.00 6 x 20 0.76 0.85 0.9 0.94 0.96 0.98.00 6 x 25 0.76 0.85 0.9 0.94 0.96 0.98.00 6 x 3 0.76 0.85 0.9 0.94 0.96 0.98.00 6 x 35 0.76 0.85 0.9 0.94 0.96 0.98.00 8 x 20 0.76 0.85 0.9 0.94 0.96 0.98.00 8 x 3 0.76 0.85 0.9 0.94 0.96 0.98.00 8 x 40 0.76 0.85 0.9 0.94 0.96 0.98.00 Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance Useful life Shelf life (storage at high temperature) REFERENCE IEC 60384-4 / EN30300 subclause 4.3 CECC 3030 subclause.8. IEC 60384-4 / EN30300 subclause 4.7 PROCEDURE (quick reference) T amb = 05 C; U R applied; for test duration see Table 3 T amb = 05 C; U R and I R applied; for test duration see Table 3 T amb = 05 C; no voltage applied; 000 h after test: U R to be applied for 30 min., 24 h to 48 h before measurement REQUIREMENTS C/C: ± 20 % tan 2 x spec. limit I L2 spec. limit C/C: ± 30 % tan 3 x spec. limit I L2 spec. limit no short or open circuit total failure percentage: % C/C: ± 20 % tan 2 x spec. limit I L2 spec. limit, Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 06-Oct-6 7 Document Number: 28323 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000