NPN-Silizium-Fototransistor Silicon NPN Phototransistor Lead (Pb) Free Product - RoHS Compliant BP 13 Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 45 nm bis 11 nm Hohe Linearität TO-18, Bodenplatte, klares Epoxy-Gießharz, mit Basisanschluss Anwendungen Computer-Blitzlichtgeräte Lichtschranken für Gleich- und Wechsellichtbetrieb Industrieelektronik Messen/Steuern/Regeln Features Especially suitable for applications from 45 nm to 11 nm High linearity TO-18, base plate, transparent epoxy resin lens, with base connection Applications Computer-controlled flashes Photointerrupters Industrial electronics For control and drive circuits Typ Type Bestellnummer Ordering Code BP 13 Q6272P75 > 8 BP 13-3/4 Q6272P3577 > 125 4 Fotostrom, E e =.5mW/cm 2, λ = 95nm, V CE = 5 V Photocurrent I PCE (µa) 25-2-22 1
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebs- und Lagertemperatur Operating and storage temperature range Kollektor-Emitterspannung Collector-emitter voltage Kollektorstrom Collector current Kollektorspitzenstrom, τ < 1 µs Collector surge current Emitter-Basisspannung Emitter-base voltage Verlustleistung, T A = 25 C Total power dissipation Wärmewiderstand Thermal resistance Wert Value T op ; T stg 4 + 8 C V CE 35 V I C 1 ma I CS 2 ma V EB 7 V Einheit Unit P tot 15 mw R thja 5 K/W 25-2-22 2
Kennwerte (T A = 25 C, λ = 95 nm) Characteristics Bezeichnung Parameter Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. sensitivity Spektraler Bereich der Fotoempfindlichkeit S = 1% von S max Spectral range of sensitivity S = 1% of S max Bestrahlungsempfindliche Fläche Radiant sensitive area Abmessungen der Chipfläche Dimensions of chip area Halbwinkel Half angle Fotostrom der Kollektor-Basis-Fotodiode Photocurrent of collector-base photodiode E e =.5 mw/cm 2, V CB = 5 V E v = 1 Ix, Normlicht/standard light A V CB = 5 V Kapazität Capacitance V CE = V, f = 1 MHz, E = V CB = V, f = 1 MHz, E = V EB = V, f = 1 MHz, E = Dunkelstrom Dark current V CE = 2V, E = Wert Value λ S max 85 nm λ 45 11 nm Einheit Unit A.11 mm 2 L B L W.5.5 mm mm ϕ ±55 Grad deg. I PCB 1. I PCB 3.1 µa µa C CE C CB C EB 7.5 13 19 I CEO 1 ( 5) na 25-2-22 3
Die Fototransistoren werden nach ihrer Fotoempfindlichkeit gruppiert und mit arabischen Ziffern gekennzeichnet. The phototransistors are grouped according to their spectral sensitivity and distinguished by arabian figures. Bezeichnung Parameter Fotostrom Photocurrent E e =.5mW/cm 2, λ = 95nm, V CE = 5 V E v = 1 lx,normlicht/standard light A V CE = 5 V Anstiegszeit/Abfallzeit Rise and fall time I C = 1 ma, V CC = 5 V, R L = 1 kω Kollektor-Emitter- Sättigungsspannung Collector-emitter saturation voltage I C = I PCEmin 1).3 E e =.5 mw/cm 2 Stromverstärkung Current gain E e =.5 mw/cm 2, V CE = 5 V I PCE I PCE Wert Value -2-3 -4-5 8 16.38 125 25.6 2 4.95 32 1.4 t r, t f 5 7 9 12 µs Einheit Unit µa ma V CEsat 15 15 15 15 mv I -------- PCE I PCB 1) I PCEmin ist der minimale Fotostrom der jeweiligen Gruppe. 1) I PCEmin is the min. photocurrent of the specified group. 12 19 3 48 25-2-22 4
Relative Spectral Sensitivity S rel = f (λ) 1 % 9 S rel 8 Photocurrent I PCE = f (E e ), V CE = 5 V Total Power Dissipation P tot = f (T A ) 7 6 5 4 3 2 1 4 5 6 7 8 9 nm 1 11 λ Output Characteristics I C = f (V CE ), I B = Parameter Output Characteristics I C = f (V CE ), I B = Parameter Dark Current I CEO = f (V CE ), E = 1 na I CEO 1.1 Photocurrent I PCE /I PCE25 = f (T A ), V CE = 5 V Dark Current I CEO = f (T A ), V CE = 2 V, E = 1 I CEO na 1 1.1 5 1 15 2 25 3 V 35 V CE Collector-Emitter Capacitance C CE = f (V CE ), f = 1 MHz, E = C CE 8 7 6 5 1 4 1 3.1.1-25 25 5 75 1 C T A 2 1 1E-3 1E-2 1E-1 1E+ 1E+1 1E+2 V V CE 25-2-22 5
Collector-Emitter Capacitance C CB = f (V CB ), f = 1 MHz, E = 16 14 C CB 12 1 8 6 4 2 1E-3 1E-2 1E-1 1E+ 1E+1 1E+2 V V CB Directional Characteristics S rel = f (ϕ) Emitter-Base Capacitance C EB = f (V EB ), f = 1 MHz, E = 22 2 C EB 18 16 14 12 1 8 6 4 2 1E-3 1E-2 1E-1 1E+ 1E+1 1E+2 V V EB 25-2-22 6
Maßzeichnung Package Outlines ø.45 (.18) Chip position 14.5 (.571) 12.5 (.492) (2.7 (.16)) ø4.3 (.169) ø4.1 (.161) 3.6 (.142) 3. (.118) Radiant sensitive area 1.1 (.43).9 (.35) 1.1 (.43).9 (.35) E C B 2.54 (.1) spacing ø5.5 (.217) ø5.2 (.25) GETY617 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 25-2-22 7
Lötbedingungen Soldering Conditions Wellenlöten (TTW) (nach CECC 82) TTW Soldering (acc. to CECC 82) T 3 C 25 2 235 C... 26 C 1. Welle 1. wave 1 s 2. Welle 2. wave Normalkurve standard curve Grenzkurven limit curves OHLY598 15 ca 2 K/s 5 K/s 2 K/s 1 1 C... 13 C 5 2 K/s Zwangskühlung forced cooling 5 1 15 2 s 25 t Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-9349 Regensburg www.osram-os.com All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1, may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 25-2-22 8