Localization in Undrained Deformation

Similar documents
Localization in Undrained Deformation 1

NUMERICAL MODELING OF INSTABILITIES IN SAND

GEO E1050 Finite Element Method Mohr-Coulomb and other constitutive models. Wojciech Sołowski

Off-Fault Plasticity and Earthquake Rupture Dynamics: 2. Effects of Fluid Saturation

Effect of the intermediate principal stress on fault strike and dip - theoretical analysis and experimental verification

Constitutive models: Incremental plasticity Drücker s postulate

Micro-mechanics in Geotechnical Engineering

Unjacketed bulk compressibility of sandstone in laboratory experiments. R. M. Makhnenko 1 and J. F. Labuz 1

Advanced model for soft soils. Modified Cam-Clay (MCC)

16.21 Techniques of Structural Analysis and Design Spring 2003 Unit #5 - Constitutive Equations

TIME-DEPENDENT BEHAVIOR OF PILE UNDER LATERAL LOAD USING THE BOUNDING SURFACE MODEL

Mechanics of Earthquakes and Faulting

Examining the Soil Responses during the Initiation of a Flow Landslide by Coupled Numerical Simulations

Constitutive modelling of fabric anisotropy in sand

Stress and Strains in Soil and Rock. Hsin-yu Shan Dept. of Civil Engineering National Chiao Tung University

MHA042 - Material mechanics: Duggafrågor

Table of Contents. Foreword... xiii Introduction... xv

Mechanics of Earthquakes and Faulting

Constitutive Modelling of Granular Materials with Focus to Microstructure and its Effect on Strain-Localization

Lecture #6: 3D Rate-independent Plasticity (cont.) Pressure-dependent plasticity

PEAT SEISMOLOGY Lecture 2: Continuum mechanics

CONTENTS. Lecture 1 Introduction. Lecture 2 Physical Testing. Lecture 3 Constitutive Models

Consolidation of a poroelastic half-space with anisotropic permeability and compressible constituents by axisymmetric surface loading

1.5 STRESS-PATH METHOD OF SETTLEMENT CALCULATION 1.5 STRESS-PATH METHOD OF SETTLEMENT CALCULATION

Formation and Extension of Localized Compaction in Porous Sandstone

Module 4 Lecture 20 Pore water pressure and shear strength - 4 Topics

IN-SITU STRESS ESTIMATION IN OFFSHORE EASTERN MEDITERRANEAN WITH FINITE ELEMENT ANALYSIS

7. STRESS ANALYSIS AND STRESS PATHS

3D and 2D Formulations of Incremental Stress-Strain Relations for Granular Soils

The Finite Element Method II

Prof. B V S Viswanadham, Department of Civil Engineering, IIT Bombay

Compaction Bands in Porous Rock

MODELING OF CONCRETE MATERIALS AND STRUCTURES. Kaspar Willam. Uniaxial Model: Strain-Driven Format of Elastoplasticity

Hydrogeophysics - Seismics

CH.9. CONSTITUTIVE EQUATIONS IN FLUIDS. Multimedia Course on Continuum Mechanics

A simple elastoplastic model for soils and soft rocks

Mechanics of Earthquakes and Faulting

PLAXIS. Material Models Manual

Inelastic constitutive properties and shear localization in Tennessee marble

Discrete Element Modeling of Soils as Granular Materials

3D simulations of an injection test done into an unsaturated porous and fractured limestone

Numerical Assessment of the Influence of End Conditions on. Constitutive Behavior of Geomaterials

A MODEL FOR COUPLED DYNAMIC ELASTO-PLASTIC ANALYSIS OF SOILS

Flow and Transport. c(s, t)s ds,

PLAXIS 3D TUNNEL. Material Models Manual version 2

3D Elasticity Theory

A thermo-hydro-mechanically coupled analysis of clay using a thermo-elasto-viscoplastic model

Chapter 1. Continuum mechanics review. 1.1 Definitions and nomenclature

ISSUES IN MATHEMATICAL MODELING OF STATIC AND DYNAMIC LIQUEFACTION AS A NON-LOCAL INSTABILITY PROBLEM. Ronaldo I. Borja Stanford University ABSTRACT

Wellbore stability analysis in porous carbonate rocks using cap models

CONSOLIDATION BEHAVIOR OF PILES UNDER PURE LATERAL LOADINGS

Compressibility & Consolidation

Modelling of mechanical and filtration processes near the well with regard to anisotropy

Finite Element Method in Geotechnical Engineering

TABLE OF CONTENTS CHAPTER TITLE PAGE TITLE PAGE DECLARATION DEDIDATION ACKNOWLEDGEMENTS ABSTRACT ABSTRAK

Why are earthquake slip zones so narrow?

A Boundary Element Method for Thermoporoelasticity Mechanics

Modelling the excavation damaged zone in Callovo-Oxfordian claystone with strain localisation

Geo-E2010 Advanced Soil Mechanics L Wojciech Sołowski. 07 March 2017

Mechanics of Earthquakes and Faulting

Juan E. Santos a,b,c, Gabriela B. Savioli a and Robiel Martínez Corredor c a

Schlumberger Technology Corporation 1935 South Fremont Drive, Salt Lake City, UT 84104,

The response of an idealized granular material to an incremental shear strain

4 Undrained Cylindrical Cavity Expansion in a Cam-Clay Medium

Universitat Politècnica de Catalunya BARCELONATECH Escola Tècnica Superior d Enginyers de Camins, Canals i Ports. Soil Mechanics.

Towards Efficient Finite Element Model Review Dr. Richard Witasse, Plaxis bv (based on the original presentation of Dr.

INTERPRETATION OF UNDRAINED SHEAR STRENGTH OF UNSATURATED SOILS IN TERMS OF STRESS STATE VARIABLES

Supplementary Information. for. Origami based Mechanical Metamaterials

PLAXIS. Scientific Manual

Elements of Rock Mechanics

Mechanics and Physics of Porous Solids

Soil strength. the strength depends on the applied stress. water pressures are required

A parametric study on the elastic-plastic deformation of a centrally heated two-layered composite cylinder with free ends

A Constitutive Framework for the Numerical Analysis of Organic Soils and Directionally Dependent Materials

Drained Against Undrained Behaviour of Sand

Bifurcation Analysis in Geomechanics

Classical fracture and failure hypotheses

Calculation types: drained, undrained and fully coupled material behavior. Dr Francesca Ceccato

Formation and Extension of Compaction Bands in Porous Sandstone

Fundamentals of Linear Elasticity

The Influence of Strain Amplitude, Temperature and Frequency on Complex Shear Moduli of Polymer Materials under Kinematic Harmonic Loading

Stress Integration for the Drucker-Prager Material Model Without Hardening Using the Incremental Plasticity Theory

EXPERIMENTAL AND COMPUTATIONAL MODELING OF UNSATURATED SOIL RESPONSE UNDER TRUE TRIAXIAL STRESS STATES

Lecture #7: Basic Notions of Fracture Mechanics Ductile Fracture

Consolidation. Hsin-yu Shan Dept. of Civil Engineering National Chiao Tung University

Continuum Mechanics. Continuum Mechanics and Constitutive Equations

Settlement and Bearing Capacity of a Strip Footing. Nonlinear Analyses

Basic Equations of Elasticity

MODELING OF CONCRETE MATERIALS AND STRUCTURES. Kaspar Willam. Isotropic Elastic Models: Invariant vs Principal Formulations

A PRESSURE VESSEL FOR TRUE-TRIAXIAL DEFORMATION & FLUID FLOW DURING FRICTIONAL SHEAR

Nonlinear Soil Modeling for Seismic NPP Applications

MODELING OF CONCRETE MATERIALS AND STRUCTURES. Kaspar Willam

13 th World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1-6, 2004 Paper No. 3016

2D Liquefaction Analysis for Bridge Abutment

Final Project: Indentation Simulation Mohak Patel ENGN-2340 Fall 13

Modified Cam-clay triaxial test simulations

Adapting The Modified Cam Clay Constitutive Model To The Computational Analysis Of Dense Granular Soils

SOIL SHEAR STRENGTH. Prepared by: Dr. Hetty Muhammad Azril Fauziah Kassim Norafida

Modeling Flow and Deformation during Salt- Assisted Puffing of Single Rice Kernels. Tushar Gulati Cornell University 1

Transcription:

Localization in Undrained Deformation J. W. Rudnicki Dept. of Civil and Env. Engn. and Dept. of Mech. Engn. Northwestern University Evanston, IL 621-319 John.Rudnicki@gmail.com Fourth Biot Conference on Poromechanics, Columbia University, June 8 1, 29

Background (Rice, JGR, 1975) σ σ=constant τ y h/2 h/2 x dτ 1 dγ = + [ dτ μd( σ p) ] G H 1 β dε = d( σ p) + dτ μd( σ p) M H p p d ε = βd γ [ ] Equilibrium: τ / y = ε Fluid mass conservation: ( q / ρ ) + = y t and Darcy's Law: q p = ρκ y p ε κ = y y t

Geometric Interpretation of Constitutive Parameters τ dε p p = βdγ > (dilation) τ p dγ 1 μ > p dγ ( ) H = H /1 + H / G tan yield surface elastic response p - dε (compaction) 1 μ, μ< G σ = constant σ (compression) γ

undrained (βμ > ) response curve τ / τ 4 3 2 inc σ p = const, μ >, β > dec σ p = const, μ<, β < 1 2 4 6 γ / γ drained (σ p = const) response curve

τ / τ 4 3 Localization predicted to occur here for undrained response BUT 2 1 2 4 6 γ / γ Localization predicted to occur here for drained response. Rice showed that small spatial perturbations grow exponentially in time beginning here

βμ < (compaction on frictional y.s. or dilation on cap y. s.) τ / τ 2 drained response curve 1 inc σ p = const, μ <, β > dec σ p = const, μ>, β < 2 4 6 undrained response curve γ / γ

Layer Problem is special because Localization predicted to occur at peak of both drained and undrained response curves Band formation is parallel to the layer boundaries More generally, there is a strong dependence on deviatoric stress state (Lode angle).

Generalize: Constitutive Relation (drained, p = constant) { } el dε = dσ ν /(1 + ν) δ dσ /2G ij ij ij kk in 1 sij 1 skl 1 dε = ij + βδ μδ dσ ij kl kl h 2τ 3 + 2τ 3 ( ) τ = ( ss /2), s = σ σ / 3 δ 1/2 ij ij ij ij kk ij μ is a friction coefficient = dτ tan ( /3) yield ( σ ) / dσ, σ = /3 in in in in in β is a dilatancy factor = dε / dγ, dγ = (2 de de ) de = dε dε δ in in in ij ij kk ij in h= dτ / dγ, σ = constant h = dτ / dγ = h/(1 + h/ G) kk ij ij kk 1/2

Localization condition yields h crit and θ band τ G σ = ( ) h = h /1 + h / G tan crit crit constant γ σ 3 θ band σ 1 h / crit G.2.2.4 axisymmetric extension.6 1.5.5 1 2sinθLode θ band axisymmetric compression 7 6 5 4 3 2 1.5.5 1 2sinθLode β =.3, μ =. 6 β =. 3, μ =.6 β =.3, μ =. 6 β =.3, μ =.6

Questions How does band angle predicted for undrained deformation differ from prediction for drained? How it depend on deviatoric stress state (Lode angle)? How do critical hardening moduli for drained and undrained deformation depend on stress state? Will also turn out that predictions for undrained deformation depend strongly on poroelastic parameters.

Undrained Response has the same form as drained if (Rudnicki, 1985) (i) the elastic portion of strain increments can be described by linear, isotropic poroelasticity; (ii) the role of the pore pressure in the inelastic strain increments is included by replacing the stress by the Terzaghi form of the effective stress, σ σ p (iii) the inelastic increment in the apparent void volume fraction is equal to the inelastic volume strain increment. dv in = dε in Rice [1977] has argued on theoretical grounds that (ii) and (iii) are appropriate for geomaterials in which the primary mechanisms of inelastic deformation are microcracking from sharp-tipped flaws and frictional sliding on surfaces with small real areas of contact. In addition, (ii) seems to be supported by experiments.

To get the undrained response from the drained, make the following substitutions in expression for inelastic strain increments: ( μβ, ) (1 B) ( μβ, ) h H = h+ ( μβ KB/ ς ) where ( Δσ ) = Δp/ /3 kk ς = 1 K / K, Biot's coefficient (often α) s where K is drained elastic bulk modulus for porous solid K is related to bulk modulus of solid constituents s B = Skempton's coefficient, For elastic strain increments replace Poisson s ratio by its undrained value: Note: for B = 1 (incompressible solid and fluid constituents, soil mechanics approx), effective value of μ and β vanish; i.e., inelastic pressure dependence and volume change vanish (Runesson et al., 1998) ν u 3 ν + (1 2 ν) Bς 1 =,, for B = 1, ς = 1 3 (1 2 ν) Bς 2

Dependence on Lode angle and poroelastic parameters for μ =.6, β =.3 64.1 Band Angle 6 56 52 48 44 axisymmetric extension drained B =.8, ζ =.8 B =.6, ζ =.8 B =.4, ζ =.6-1. -.5..5 1. N = 2 sin(θ Lode ) crit hardening modulus/g. -.1 -.2 -.3 -.4 -.5 axisymmetric compression μβkb / ς h crit /G, drained h crit und /G, undrained H crit /G, undrained -1. -.5..5 1. N = 2 sin(θ Lode ) Note: localization condition is met for undrained response before drained response h crit /G = critical hardening modulus for drained deformation H crit /G = critical hardening modulus for undrained deformation h crit und /G = critical hardening modulus of underlying drained response curve at undrained response satisfies localization condition.

Dependence on Lode angle and poroelastic parameters for μ =.6, β = -.3 Band Angle axisymmetric extension 56 54 52 5 48 46 44 drained B=.4, ζ=.6 B=.6, ζ=.8 B=.8, ζ=.8 42-1. -.5..5 1. N=2 sin(θ Lode ) crit hardening modulus/g.2.1. -.1 -.2 axisymmetric compression μβkb / ς h crit /G, drained h crit und /G, undrained H crit /G, undrained -1. -.5..5 1. N=2 sin(θ Lode ) h crit /G = critical hardening modulus for drained deformation H crit /G = critical hardening modulus for undrained deformation h crit und /G = critical hardening modulus of underlying drained response curve at undrained response satisfies localization condition.

Conclusions and Caveats Relation between localization conditions and band angle for drained and undrained deformation depend strongly on deviatoric stress state (Lode angle) and poroelastic parameters. Band angle decreases as solid and fluid constituents become less compressible. For a Drucker Prager (Rudnicki Rice) constitutive relation undrained response (and hence localization conditions) can be obtained directly by substitution (no need to do separate analysis) Relevance of undrained localization condition is unclear when it occurs after the drained condition. Analysis should really include possibility of spatial perturbations (as in Rice, 1975) for which local and global drainage conditions will differ.