Optocoupler, Phototransistor Output, Dual ILD6 Vishay Semiconductors FEATURES Dual version of SFH6 series i79073_7 A A 2 3 4 8 7 6 5 E E Isolation test voltage, 5300 V RMS V Esat 0.25 ( 0.4) V at I F = ma, I = 2.5 ma V EO = 70 V ompliant to RoHS Directive 2002/95/E and in accordance to WEEE 2002/96/E AGENY APPROVALS UL577, file no. E52744 system code H or J, double protection DIN EN 60747-5-5 (VDE 0884)/DIN EN 60747-5-5 pending SA 9375 BSI IE 60950; IE 60065 DESRIPTION The ILD6 series is a dual channel optocoupler series for high density applications. Each channel consists of an optically coupled pair with a gallium arsenide infrared LED and silicon NPN phototransistor. Signal information, including a D level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD6 series is the dual version of SFH6 series and uses a repetitive pin-out configuration instead of the more common alternating pin-out used in most dual couplers. ORDERING INFORMATION I L D 6 0 - # X 0 0 # T DIP-# Option 6 PART NUMBER TR BIN PAKAGE OPTION TAPE AND REEL 7.62 mm Option 7.6 mm Option 9 AGENY ERTIFIED/PAKAGE TR (%) UL, SA, BSI 40 to 80 63 to 25 to 200 60 to 320 DIP-8 ILD6- - ILD6-3 - DIP-8, 400 mil, option 6 - - ILD6-3X006 - SMD-8, option 7 - ILD6-2X007T - - SMD-8, option 9 - - ILD6-3X009 ILD6-4X009 Additional options may be possible, please contact sales office. > 0.7 mm > 0. mm Document Number: 8365 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com Rev..9, 24-May- THE PRODUTS DESRIBED HEREIN AND THIS DOUMENT ARE SUBJET TO SPEIFI DISLAIMERS, SET FORTH AT www.vishay.com/doc?90
ILD6 Vishay Semiconductors Optocoupler, Phototransistor Output, Dual ABSOLUTE MAXIMUM RATINGS (T amb = 25, unless otherwise specified) PARAMETER TEST ONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V R 6.0 V Surge forward current t.0 ms I FSM.5 A Power dissipation P diss mw Derate linearly from 25.3 mw/ Forward continuous current I F 60 ma OUTPUT ollector emitter voltage V E 70 V ollector current I 50 ma t.0 ms I ma Power dissipation P diss 50 mw Derate linearly from 25 mw/ OUPLER Isolation test voltage t =.0 s V ISO 5300 V RMS Isolation resistance V IO = 500 V, T amb = 25 R IO 2 V IO = 500 V, T amb = R IO Storage temperature T stg - 55 to + 50 Operating temperature T amb - 55 to + Junction temperature T j Lead soldering time at 260 s Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELETRIAL HARATERISTIS (T amb = 25, unless otherwise specified) PARAMETER TEST ONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I F = 60 ma V F.25.65 V Reverse current V R = 6.0 V I R μa apacitance V R = 0 V, f =.0 MHz O 25 pf OUTPUT ollector emitter breakdown BV EO 70 90 V I voltage = ma, I E = μa BV EO 6.0 7.0 V ollector emitter dark current V E = V I EO 50 na ollector emitter capacitance V E = 5.0 V, f =.0 MHz E 7.0 pf ILD6- I EO 50 na ollector emitter leakage ILD6-2 I EO 50 na V current E = V ILD6-3 I EO 5.0 na ILD6-4 I EO 5.0 na OUPLER ollector emitter saturation voltage I F = ma, I = 2.5 ma V Esat 0.25 0.40 V oupling capacitance 0.35 pf Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 8365 2 Rev..9, 24-May- THE PRODUTS DESRIBED HEREIN AND THIS DOUMENT ARE SUBJET TO SPEIFI DISLAIMERS, SET FORTH AT www.vishay.com/doc?90
Optocoupler, Phototransistor Output, Dual ILD6 Vishay Semiconductors URRENT TRANSFER RATIO (T amb = 25, unless otherwise specified) PARAMETER TEST ONDITION PART SYMBOL MIN. TYP. MAX. UNIT TR () () TR will match within a ratio of.7: I F = ma, V E = 5.0 V I F =.0 ma, V E = 5.0 V SWITHING HARATERISTIS (T amb = 25, unless otherwise specified) ILD6- TR 40 80 % ILD6-2 TR 63 25 % ILD6-3 TR 200 % ILD6-4 TR 60 320 % ILD6- TR 3 % ILD6-2 TR 22 % ILD6-3 TR 34 % ILD6-4 TR 56 % PARAMETER TEST ONDITION PART SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Rise time Fall time Turn-on time Turn-off time SATURATED Rise time Fall time Turn-on time Turn-off time V = 5.0 V, R L = 75, I F = ma V = 5.0 V, R L = 75, I F = ma V = 5.0 V, R L = 75, I F = ma V = 5.0 V, R L = 75, I F = ma ILD6- ILD6-2 2.5 t r ILD6-3 2.9 ILD6-4 3.3 ILD6- ILD6-2 2.6 t f ILD6-3 3. ILD6-4 3.5 ILD6-3.0 ILD6-2 3.2 t on ILD6-3 3.6 ILD6-4 4. ILD6-2.9 ILD6-2 3.4 t off ILD6-3 3.7 ILD6-4 4. V = 5.0 V, R L =.0 k, I F = 20 ma ILD6- V = 5.0 V, R L =.0 k, I F = ma ILD6-2 2.8 t r V = 5.0 V, R L =.0 k, I F = ma ILD6-3 2.8 V = 5.0 V, R L =.0 k, I F = 5 ma ILD6-4 4.6 V = 5.0 V, R L =.0 k, I F = 20 ma ILD6- V = 5.0 V, R L =.0 k, I F = ma ILD6-2 4 t f V = 5.0 V, R L =.0 k, I F = ma ILD6-3 4 V = 5.0 V, R L =.0 k, I F = 5 ma ILD6-4 5 V = 5.0 V, R L =.0 k, I F = 20 ma ILD6-3.0 V = 5.0 V, R L =.0 k, I F = ma ILD6-2 4.3 t on V = 5.0 V, R L =.0 k, I F = ma ILD6-3 4.3 V = 5.0 V, R L =.0 k, I F = 5 ma ILD6-4 6.0 V = 5.0 V, R L =.0 k, I F = 20 ma ILD6-8 V = 5.0 V, R L =.0 k, I F = ma ILD6-2 25 t off V = 5.0 V, R L =.0 k, I F = ma ILD6-3 25 V = 5.0 V, R L =.0 k, I F = 5 ma ILD6-4 25 Document Number: 8365 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com Rev..9, 24-May- 3 THE PRODUTS DESRIBED HEREIN AND THIS DOUMENT ARE SUBJET TO SPEIFI DISLAIMERS, SET FORTH AT www.vishay.com/doc?90
ILD6 Vishay Semiconductors Optocoupler, Phototransistor Output, Dual TYPIAL HARATERISTIS (T amb = 25, unless otherwise specified) V F - Forward Voltage (V).4.3.2..0 0.9 0.8 iilct6_0 0.7 0. T amb = - 55 T amb = 25 T amb = 85 I F - Forward urrent (ma) NTR - Normalized TR iilct6_04.5.0 0. V E = V, I F = ma T amb = 25 TR E(sat) V E = 0.4 V T amb = 70 NTR(SAT) NTR Fig. - Forward Voltage vs. Forward urrent Fig. 4 - Normalized Non-Saturated and Saturated TR vs. LED urrent NTR - Normalized TR iilct6_02.5.0 0. V E = V,I F = ma T amb = 25 V E = 0.4 V TR E(sat) Fig. 2 - Normalized Non-Saturated and Saturated TR vs. LED urrent NTR(SAT) NTR NTR - Normalized TR.5.0 NTR(SAT) NTR 0. iilct6_05 V E = V, I F = ma,t amb = 25 TR E(sat) V E = 0.4 V T amb = 85 Fig. 5 - Normalized Non-Saturated and Saturated TR vs. LED urrent NTR - Normalized TR iilct6_03.5.0 0. V E = V, I F = ma,t A = 25 TR E(sat) V E = 0.4 V T A = 50 NTR(SAT) NTR IE - ollector urrent (ma) 35 30 25 20 5 5 0 0 iilct6_06 50 25 85 20 30 40 50 70 60 Fig. 3 - Normalized Non-Saturated and Saturated TR vs. LED urrent Fig. 6 - ollector Emitter urrent vs. Temperature and LED urrent www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 8365 4 Rev..9, 24-May- THE PRODUTS DESRIBED HEREIN AND THIS DOUMENT ARE SUBJET TO SPEIFI DISLAIMERS, SET FORTH AT www.vishay.com/doc?90
Optocoupler, Phototransistor Output, Dual ILD6 Vishay Semiconductors 5 V = 5 V I EO - ollector Emitter (na) 4 3 2 - Typical V ce = V f = khz, DF = 50 % I F = ma R L V O - 2-20 0 20 40 60 80 T amb - Ambient Temperature ( ) iilct6_07 iild6_ Fig. 7 - ollector Emitter Leakage urrent vs.temperature Fig. - Non-Saturated Switching Schematic t plh - Propagation (µs) 0 iilct6_08 0. T amb = 25, I F = ma V = 5 V, V th =.5 V t phl t plh R L - ollector Load Resistor (kω).0 Fig. 8 - Propagation Delay vs. ollector Load Resistor 2.5.5 t phl - Propagation Delay (µs) Input t on t off t pdon t pdoff Output td t r t s t r % % 50 % 50 % 90 % 90 % iild6_ Fig. - Saturated Switching Time Test Waveform I F V O t D t R t PLH V TH =.5 V iild6_09 t PHL t S t F Fig. 9 - Switching Timing Document Number: 8365 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com Rev..9, 24-May- 5 THE PRODUTS DESRIBED HEREIN AND THIS DOUMENT ARE SUBJET TO SPEIFI DISLAIMERS, SET FORTH AT www.vishay.com/doc?90
ILD6 Vishay Semiconductors Optocoupler, Phototransistor Output, Dual PAKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 6.645 ± 0.65 5 6 7 8 ISO method A 9.77 ± 0.4 0.95 ± 0.9 4 typ. 0.79 7.62 typ. 3.555 ± 0.255.27 ± 5 0.70 ± 0.9 3 to 9 3.045 ± 0.255 6.095 ± 0.255 i78006 2.54 typ. 0.25 ± 5 Option 6 Option 7 Option 9.36 9.96 7.62 typ. 9.53.03 7.8 7.4 7.62 ref..6.92 0.35 0.25 0.7 8.4 min..3 max. 4.6 4. 0.2 0.249.02 0.25 typ. 5 max. 0.76 0.76 2.54 R 0.25.78 2.54 R 0.25.78 8450-6.05.52.05.52 PAKAGE MARKING ILD6 V WWY H 68 s Only option and 7 reflected in the package marking Tape and reel suffix (T) is not part of the package marking www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 8365 6 Rev..9, 24-May- THE PRODUTS DESRIBED HEREIN AND THIS DOUMENT ARE SUBJET TO SPEIFI DISLAIMERS, SET FORTH AT www.vishay.com/doc?90
www.vishay.com Legal Disclaimer Notice Vishay Disclaimer ALL PRODUT, PRODUT SPEIFIATIONS AND DATA ARE SUBJET TO HANGE WITHOUT NOTIE TO IMPROVE RELIABILITY, FUNTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTEHNOLOGY, IN. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 90