Gasketed Sewer Fittings SDR Injection Molded in Sizes Fabricated in Sizes G while extra heavy support is provided under the pipe stop at branch intersections for added strength. Where available, reducing branches on injection molded, 0, and tees, the reducing branch body and reducing branch hub area below the gasket race. Applications of sewage and surface water. applicable. Product Spotlights Controlled Settlement Joint The controlled settlement joint (CSJ) inhibits penetration of the riser through the lateral connection and into the waterway. The new double gasketed CSJ is a slip joint that permits a exceeding 00 lb/feet. Riser movement typically occurs from settlement forces or concentrated loads resulting from elevation changes in service connections. The controlled settlement joint that inhibits damage such as splitting, cracking, or spearing. As a result, this minimizes costly excavation and replacement of Vertical Riser Adapter (G9, G9, G9) This simple solution in conjunction with the unique integral the pipe stop. Refer to page G for pricing and available Third y Tested Short Specs Gasketed Sewer Fittings shall be manufactured in accordance with ASTM D, ASTM F, and CSA B.. They shall be injection molded from Sanitation Foundation (NSF), to meet ASTM D7. Gaskets shall be manufactured in accordance with ASTM F 77 or ASTM proper installation and to prevent dislocation or misalignment during system assembly. Gasket joints must comply with ASTM Where available, reducing branches on injection molded, 0, thickness in the reducing branch body and reducing branch hub area below the gasket race. by the International Association Of Plumbing And Municipal Standards Association (CSA) to meet CSA B.. ATTENTION:not to be used with compressed air or gases. Royal does not recommend that piping systems that include its products be tested with compressed air or gases. Royal Building Products (formerly Plastic Trends) 00 Mound Road Shelby Twp., MI.7.700 00..90 Fax:.7.0 www.royalbuildingproducts.com
Straight Tee GxGxG * x *0 x *0 x *0 x 0 * x * x * x 0 * x 7 x 7 x 0 x x x x x x 7 x x 0 x x x x x x 7 x x G0 G0 G0 G0 G0 G00 G00 G00 G0 G0 G0 L0 L0 L0 L0 L07 L0 L0 0 0 0 7 7.7..0 0.7 0.9 0. 0.9.0. 9. 7..7 0.9 9.. 90.70 9. 79..99 7.0 7.7.,009.9,.7,7.,79.,07.,7.,9.,0.,.,.,.,7.09,9.09,.0,.,9.00,.,7.,0.,7.,77.70,.9,0.,99. 7,7. 9,9.,.,7.90,79.,.,7. 7,.9 7,.7 7,.0 9,9.7 9,77.,.79,. 7,70. 7,.,. 9,9. 9,9. 9,.0,.7,99.9,.99,.,.0 9,0. 0,0.0 0,97.77,.,7.,707.7,7.,9.70,. 9,07. Degree Wye GxGxG *0 x *0 x 0 * x * x 0 * x 7 x 7 x 0 x x x x x x 7 x x 0 x x x x x x 7 x x G G G G G G0 G0 G0 G G G L L L L L7 L L 0 0 0 0.79. 77.9 0..9.9 0.7.. 7.7 7..7 9..9 77. 7. 09.0 90.,0.,07.,.,7.79,.,97.7,970.70,0.9,0.7,7.,99.,79.0,0.,0.9,.,.7,0.,7.09,99.,7.,07.,.7,0.,0.0 7,9.,.09 0,.,0.77,.,9.,.07 7,0.9 7,9.,.0,. 9,9.7 0,9.,.9,9. 7,9.0 7,9.9 9,07.0 0,0. 0,9.9 0,9.7,7.0,.9,0.9,79.,77.7 0,0. 0,.9,.,000.9,.70,9.0,97. 7,7.9,.7,7. Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
www.royalbuildingproducts.com Gasketed Sewer Fittings SDR G Straight Tee SxGxG x 0 x 0 x 0 x 0 x 0 x x x x 0 x 7 x 7 x 0 x x x x x x 7 x x 0 x x x x x x 7 x x G G G G L L70 L7 L7 L7 L7 L7 L77 L7 L7.7.7 9..9. 7.. 07..0.0 9. 9.9 79. 79.0 9.7 7..7.0 9.,.,0.,9.,99.,07.,.9,7.0,.,9.7,70.7,90.,.90,.0,9.0,009.9,9.0,0.7,70.90,7.7,0.7,9.,9.,.77,0.0,70. 0,9.0,7.,.09,.7,7.9 7,79.0,.0,.7,79. 0,7.70,. 7,0. 7,.0,.7,7. 9,. 0,70.7 0,970.,9.7,979.7,7.9 7,9.7,9. 9,9.,0.,.7,.,7.77,.,7.7 7,. 9,.,90. 9,900.0 Degree Wye SxGxG 0 x 0 x 0 x 0 x 0 x x x x 0 x 7 x 7 x 0 x x x x x x 7 x x 0 x x x x x x 7 x x G G G G G L L L L L L L7 L L 0 0 9...7. 0.. 0.97 0..9 7.9.99.0 79. 99.7,009.9 77. 9.,07.,.9,9.0,7.9,00.,0.7,.,.,.,.,.,7.,00.,7.,9.,.0,90.7,77.7 7,9.0,.,9.,7.,0.,.90,9.0,. 9,7.70,7.,.,.9 7,0. 7,.,7.7 9,.7 9,90. 9,.,9.7,.0 7,9.0 7,9.7 9,070. 9,9. 0,.77,77.,07.,.77,77.9,. 9,7. 0,07. 0,.,.7,99.,.,90.,9.9 7,. 0,.7,09.,99.,09.9 * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G
0 x 0 x x x 0 x 0 x x x x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x G G G G G G0 G0 G0 G G G L Straight Tee with DWV Branch GxGxDWV G Straight Tee with DWV Branch GxGxDWV H Combo Wye & / Bend GxGxG ( Piece) 0 0 0 9.9.7 0.. 7.7 7. 7.7.7,9.,997.9,7.,9.7,9.,0.,.9,. 0.0 79... 9.99 0.0 79. 7.,0.,90.7,9.0,777.,0.,9.,.7,7.70 0.0 9.7..0. 7. 9.9.9.9 99.7 79..0 0.,.,.9 77.7.,07.,.,.00,.9,7.0,0.,0.,.7,7.90,.07,0.79,997.,.,.,.7,09.,9.0,7. 7,0.0,7.9,.0 0,9. 0 x 0 x x x 0 x 0 x x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x L0 L L Degree Wye with DWV Branch GxGxDWV G Degree Wye with DWV Branch GxGxDWV H Double Degree Wye GxGxGxG 0 7. 9.9.0... 70. 9.9,09.0,097.,.7,09.,0.9,7.9,9.,...7.. 79.. 7.0 90.00,9.,997.9,79.,9.9,9.,.9,.9,.. 9..7 99.9.07 7.0 7.79 9.. 9. 7.79 7.7,0.,.,.7,07.9,.7,.,7.,.,.0,.,.0,.7,9.,.9,9.,09.,7. 7,09.,.,9.,7.9,.7,90. 0,7.,.7,.,.9 Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
www.royalbuildingproducts.com Gasketed Sewer Fittings SDR G 0 x 0 x 0 x 0 x 0 x x x x 0 x Sanitary Tee (TY) GxGxG G G7 G G G L0 L 0 7.7. 9.0 07.7. 9.70 9..9.9 907. 79..0 77.,.9,.0 77.7. 9.7,.,9.,00.0,.7,.,.07,0.79,.0,.,.7,7.7,.,9.,9.0,.9 9,99.0 9,. 0,.90 x x 0 x 0 x x x 0 x 0 x x x Sanitary Tee with DWV Branch (TY) GxGxDWV G 0 Sanitary Tee with DWV Branch (TY) GxGxDWV H 9..9.97. 7.7. 9.,.,.77,99.,.,9.,99.9,.,7.0,07. 70.0 9..0 90. 7..9. 9.7,0.7,07.,900.,09.0,7.7,7.,0.,9.99 Sanitary Tee (TY) SxGxG 0 x 0 x 0 x 0 x 0 x x x x 0 x Way Cleanout GxGxG G7 G77 G7 G7 G7 L70 L7 G00 G00 0. 9.9 09..0 7.9. 7.. 77.,0..9 7.7 9.7,90.0,.9 9. 9.,09.,.,0.,.,0.,0.,0.9,7.9,009.9,.9,.7,. 7,9. 7.0.9 Tee Cross GxGxGxG x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x x L79 L79 L79 L790 L79 L79 L79..0 7.7.7 70. 0.0..09 77.00 9.00 9. 9.9.9,00.,9.,07.0,7.,.,.,.90,0.,7.0,.,.,9.9,.,9.,0.,09.7,0.,79.9,7.99,079.9,0.,.,9.7 7,.7 * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G
* * * *0 * G0 G0 G0 G00 G0 0 9.7.7..0. / Bend (90) GxG / Bend (90) SxG * * * *0 * G G G G0 G 0 0. 7.9 9.9. 7. / Bend (90) GxG Long Sweep / Bend (90) SxG Long Sweep * * * 0 7 G G7 G G0 G L0 L0 L0 L0 L07 L0 L0.0 0.0 9...00,.9,90.,9.9,7.70,9.9,.9 9,000.9 * * * 0 7 G7 G77 G7 G70 G7 L L L L L7 L L....7 0.,.9,90.,9.9,7.,9.9,.9 9,000.9 Deep Socket / Bend (90) H H77 H.0. 9.7 Deep Socket / Bend (90) H7 H777 H7.0. 9.7 / Bend () GxG / Bend () SxG * * * *0 * 7 G0 G0 G0 G00 G0 L0 L0 L0 L0 L07 L0 L0 0 7 9.0 9.7..9 9. 99.,0.7,.7,7.9,77.0,.9,. * * * *0 * 7 G0 G0 G0 G00 G0 L0 L0 L0 L0 L07 L0 L0 0 7.. 0..7 0.7 99.,0.7,.7,7.9,77.0,.9,. Deep Socket / Bend () GxG * H0 H0 H0 7...9 Deep Socket / Bend () SxG * H0 H0 H0 7...9 / Bend () GxG (Extra Long Sweep Radius) / Bend () SxG (Extra Long Sweep Radius) 0 L0 L0 L0 L00 L0 L0..9 0.7,90.,0.,0. 0 L90 L90 L90 L900 L90 L90..9 0.7,90.,0.,0. / Bend () GxG / Bend () SxG 0 7 L. L. L. L0. L. L. L. L. L. L7. L. L. 0. 9.7. 7.0 00.99,00.,0.07,99.,7.0,77.9,.9,. 0 7 L. L. L. L. L. L. L. L. L. L7. L. L. 0. 9.7. 7.0 00.99,00.,0.07,99.,7.0,77.9,.9,. Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
www.royalbuildingproducts.com * * * *0 * 7 G70 G70 G70 G700 G70 L70 L70 L70 L70 L707 L70 L70 0 9.7.. 7.0 00.99,00.,0.07,99.,7.0,77.9,.09,. Gasketed Sewer Fittings SDR / Bend (.) GxG / Bend (.) SxG * * * *0 * 7 G7 G7 G7 G70 G7 L7 L7 L7 L7 L77 L7 L7 0 G..0 7. 99.09 9.,00.,0.07,99.,7.,77.9,.09,. Deep Socket / Bend (.) GxG * H70 H70 H70 7...9 Deep Socket / Bend (.) SxG * H7 H7 H7 7...9 / Bend (.) GxG (Extra Long Sweep Radius) / Bend (.) SxG (Extra Long Sweep Radius) 0 L90 L90 L90 L90 L9 L9..9 0.7,90.,0.,0. 0 L90S L90S L90S L90S L9S L9S..9 0.7,90.,0.,0. / Bend (.) GxG / Bend (.) SxG 0 7 L9 L9 L9 L9 L9 L9 L9 L9 L9 L97 L9 L9 0. 9.7. 7.0 00.99,00.,0.07,99.,7.0,77.9,.9,. 0 7 L L L L L L L L L L7 L L 0. 9.7. 7.0 00.99,00.,0.07,99.,7.0,77.9,.9,. Cap (G) * * * *0 * 7 G0 G0 G0 G00 G0 L0 L0 L0 L0 L07 L0 L0 7 0 0 7..7.0 00. 0.79. 707.9,.99,77.,.,7.,9.77 Spigot Plug (S) * * * *0 * 7 G G G G0 G L L L L L7 L L 9...9 7.0 0.77 0.9 7.9,.7,70.09,0.,7.,77. Stop Coupling GxG * * * *0 * 7 G0 G0 G0 G00 G0 L0 L0 L0 L0 L07 L0 L0 0..... 7.9,0.7,7.9,.,9.9,7.7,9. Repair Coupling GxG * * * *0 * 7 G G G G0 G L L L L L7 L L 0..... 7.9,0.7,7.9,.,9.9,7.7,9. * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G7
*0 x * x * x 0 x 0 x x x x x x 7 x 0 x x x x x x 7 x Concentric Increaser Coupling GxG 7 7 7 9. 0..7..7 9. 70.9 9..9.... 7. 79. 77. 70. 79.09 9.97 7. 7.,0.,.,.,9.,0.77,9.9,0.,.9,9.,.,.,.9,0.7,7.07,0.,.0,7.9,0.,.79,.,70.,7.,0.,.9,0.0,7.,97.,9.7,.0 7,07. 9,.7 9,. 0,.0,09.00,7.9,97.,9.7,.0,7.0 9,. 9,. 0,.,.,770.,.9 *0 x * x * x 0 x 0 x x x x x x 7 x 0 x x x x x x 7 x G G9 G0 Concentric Increaser Bushing SxG 0. 9. 07....77.7.0 9. 7.7 0..70.. 7. 79.0 0.7.7.70.. 99.0,00.,0.,0.,0.7,0.77,0.0,09.,0.,09.,.0,.0,7.9,.7,7.,0.,097.,.7,.,.,7.,9.,79.7,.99,.,.,.,9.,. 7,07. 9,.7 9,. 0,.0,09.0,0.7,.,9.,. 7,07. 9,. 9,. 0,.,.7,770.,. Controlled Settlement Joint GxG x x x H00 H00 H00.0 9.9. Controlled Settlement Joint SxG x x x H H H 0 7 9. 9.7. Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
www.royalbuildingproducts.com Gasketed Sewer Fittings SDR G x 0 x 0 x 0 x x x x x 0 Eccentric Increaser Coupling GxG 7.9.7.7 7.0. 7.09.7. 7. 0.0.. 97. 7..99 0.9 9...0 79. 9.,.,7.,90.,0.,9.0,.0,79.,.,.,7.0,.70,.9,7.7,7.9,00.0,.9,97.,.0,.0,.7,9.,09.97,.,0.0 0 x 0 x 0 x x x x x 0 Eccentric Increaser Bushing SxG 0 7.0 0.0..9 7. 7.... 9..90 0.79 9.7 9.79 799.9.7.99.9.0 7..0 9.97,0.0,0.0,07.0,00.79,.,9.,.,.7,9.9,.9,7.09,.,0.9,9.0,.9,0.7,.00,.7,.,9.79,.79,9.,0.0 Gasketed C900 Adapter Coupling GxG Gasket SDR Sewer Hub x Gasket C900 Hub x x x 0 x 0 x H70 H70 H70 H70 H7 H7 H7 H7 H7.0...0.,7.,0.9,7.,9. Manhole Adapter without Pipe Stop SxG Sand Finish x x x 0 x 0 x 7 x 7 x x L90 L90 L90 L900 L90 L90 L90 L90 L90 L907 L90 L90.9 7..9 9.0.0 79.9. 79.,.9,.,.7,00.7 Gasketed C900 Adapter Bushing SxG Chamfer SDR Sewer Spigot x Gasket C900 Hub x x x 0 x 0 x H70 H70 H70 H70 H7 H7 H7 H7 H7... 7..0,77.,0.,79.90,909. Gasketed C900 Adapter Bushing SxG C900 Spigot x SDR Gasket Hub x x x 0 x 0 x H900 H900 H900 H9000 H900 H900 H900 H900 H900 0..0...,7.,00.,.7,. * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G9
x 0 x 0 x x 0 x 0 x 0 x 0 x G G G H7 H H9 H0 H0 H H9 H9 H9 H90 H9 G9 G9 G9 L90 L9 Gasketed Sewer Adapter HxG Solvent Sewer Hub x Gasket Sewer Hub Gasketed DWV Adapter Coupling GxDWV G Gasket Sewer Hub x Gasket DWV Hub..7..07..0 9.0. 7.. Solvent Sewer to DWV Adapter Coupling HxDWV G Solvent Sewer Hub x Gasket DWV Hub Solvent DWV Adapter Bushing SxDWV H Chamfer Sewer Spigot x Solvent DWV Hub. 7.0.0 07..7.0.9..0.90.90.0 0 x 0 x 7 x 7 x 0 x 0 x x x x 0 x 0 x G90 G90 G90 L900 L90 L90 L90 L90 L90 L907 H H H H90 H90 H9 G9 G9 G9 G0 G09 L00 L00 L0 Gasketed Sewer Adapter SxG Solvent Sewer Spigot x Gasket Sewer Hub Gasketed DWV Adapter Bushing SxDWV G Chamfer Sewer Spigot x Gasket DWV Hub Solvent Weld Sewer Adapter SxH Chamfer Sewer Spigot x Solvent Sewer Hub DWV Adapter Sleeve DWV SxSewer G DWV Spigot x Gasket Sewer Hub 7..0.0.9.90. 7.7 79.9,.,..70 0.9.7. 99.7.0..7 0.. 7.9..0.7 Temporary Plug Polyethylene (S) * * * G G G 0..7 9.7 Vertical Riser Adapter SxS G9 G9 G9 9.7 7.9.0 InLine Backwater Valve GxG 0 L00 L00 L00 L00 L0.0.,7.,.9,9.9 Terminal Backwater Valve (G) 0 L00 L00 L00 L00 L0 0.. 9. 70.70. IntelliCap with M Marker * * 0 79. 99.9 IntelliDisc with M Marker * * 0 0.. Stainless Steel Clamp (QuickLock) / Width P P Recommended in lb torque, not to exceed 0in lb.0.09 Stainless Steel Clamp (Standard) 9/ Width Not to exceed 00in lb torque.. Skirt Gasket for Saddle Tee INLET INLET G00 G00.7 0. Skirt Gasket for Saddle Wye INLET INLET G0 G0 7.0. Page G0 * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
www.royalbuildingproducts.com Gasketed Sewer Fittings SDR G * * * * Skirt gasket included Saddle Tee with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet.7 70.0 0.. 7.. 7.70 0.9 7.7 7.7 9.7 * * * * Skirt gasket included Saddle Wye with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet 0.0 70.0 7..9 9.0.79 7. 0.7.70. 9. Saddle Tee with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet w/ Locator Rib Skirt gasket included. 77.0....9 9.9 Saddle Wye with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet w/ Locator Rib Skirt gasket included.0 77.0 79.7.7.9 70.7 9. Saddle Tee with Stainless Steel Clamps Extended Solvent Skirt x Gasket Inlet x x x 0 x 0 x 0 x x x x x 0.7 70.0 0.. 7..0. 7.70. 0..7 7..9.9 7... 0.0. 7. 70. 97.90 7.9. 70.9 7. 7.9,09. 9..0.9 9.7 700. 7.,0.,....7. 7. 0.,7.7,.,. 0.. Saddle Wye with Stainless Steel Clamps Extended Solvent Skirt x Gasket Inlet x x x 0 x 0 x 0 x x x x x 0 0.0 70.0 7..9 9.0.9.79 7..7 7.9. 79.7.7.9 77. 90. 7..7 9.. 9.9.0 9. 7. 7.0.70 9.7,.9..0 7.7 7.0 90.7 97.99,7.,. 9. 0.7 707. 79.07 9.,0.9,.,.,..9.9 * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G
Reducing Tee Vertical Riser Kit x x HDB0 HDB0 9. 7.9 x x Reducing Degree Wye Vertical Riser Kit HDB HDB $7. $77.09 Reducing Sanitary Tee (TY) Vertical Riser Kit x x HDB HDB. 7. Locator for M Marker P POR Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC