P U M P S THE BENCHMARK FOR PERFORMANCE The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 5Hz
I N D E X TEP / TSP / TRP SERIES - PERIPHERAL PUMPS Page No. General Data... Technical Data, Material Specification...4 Performance Data and Curves...5 Net Weight & Dimensions...6 Conversion Chart...7
G E N E R A L D A T A P E R I P H E R A L P U M P S T E P / T S P / T R P - S E R I E S Liquids Pumped Non-aggressive, Non explosive, Pure, Cold, Fresh water without abrasive particles having the following characteristics. I) ph 6.5 to 8.5 h) Turbidity 5 ppm silica scale (max.) 6 2 g) Viscosity.75x m /sec (max.) f) Hardness (Drinking Water) (max.) e) Specific gravity.4 (max.) d) Allowable solids ppm (max.) b) Chlorine ion density 5 ppm (max.) a) Temperature 9.4 F (max.) Model Designation PERIPHERAL PUMPS l l l - l l l Tormac Phase / Connection / Frequency S = Single phase PSC T = Three phase DOL Peripheral-End suction/ /Side suction/self-priming Motor Power in kw =.7 7=.75
P E R I P H E R A L P U M P S T E P / T S P / T R P - S E R I E S These pump are manufactured using state-of-art machiner y in a production environment accredited with ISO 9 certification. The impeccable and ergonomic design of pump and motor portions are coupled with quality materials of construction not only to ensure its trouble free operation and longevity but also enable optimum performance in hydraulic efficiency. Technical data Phase : 22 / 24V, 5Hz, 29 rpm (PSC) Phase : 8 / 45V, 5Hz, 29 rpm (DOL) All Phase models are fitted with Thermal Overload Protector (TOP) B Class Insulation with IP 54 Protection S Continuous Duty Performance & Specifications Maximum Operating Pressure Maximum Liquid Temperature Maximum Ambient Temperature 5 bar +5 C +4 C TEP series are end suction and radial delivery TSP & TRP series are radial suction and delivery Applications Domestic water supply Lawn sprinklers Automobile washing Pressure Boosting in various fields Watering gardens Structural Characteristics Cast iron Pump Casing Aluminium Motor Frame Brass Impeller Brass Volute Insert Stainless Steel Shaft Carbon / Ceramic Mechanical seal Double Sealed Precision Ball Bearing Note: The company reserves the right to modify the technical specification and the illustrations without notice.
TEP/TSP / TRP - SERIES Motor Power Pump Model Performance Data Type Nominal Pump Size in Inches Inlet x Outlet Suction Lift in m 6 2 8 25 Total Head in Metr es 5 Discharge in lps 4 45 5 kw HP TEP-S.7.5 END SUCTION x 8.5.45.4.25.8. (48m) TEP-7S.75. END SUCTION x 8.79.77.75.6.55.5.7..25.9 (48m) TRP-S.7.5 SIDE SUCTION x 8.6.5.44.5 TSP-S.7.5 SELF PRIMING x 8.52.42..9 TSP-7S.75. SELF PRIMING x 8.8.78.7.64 TEP/TSP / TRP - SERIES 2. 4. 2. 4. 6. 6. 8. 8.. 2..26.2..55.45.5.25.6 (74m) Performance Curve 2. H (ft) (74m) (4m) 4. 6. 8.. 2. 2. Q-(Imp gpm) Q-(US gpm) 4. Q-(Imp gpm) Q-(US gpm) 2. 4. H 9 (m) 55 2. 4. 6. 8.. H 9 (m) H (ft) 27 27 8 8 24 24 TE 7 S 7 P- 7 2 TS 2 7 PS 6 6 8 8 5 5 TR 5 P- 4 TE 4 P- 2 5 S S 2 TSP -S 9 9 2 6 2 6..2.5...4.5.5.6 2..7 2.5.8.9 Q-(lps) Q-(m³/hr)...2.5...4.5.5.6 2..7 2.5.8.9 Q-(lps) Q-(m³/hr). The above given per formance cur ves are common for both single phase & thr ee phase, the alphabetical letter of the model identification S denotes single phase & will be r eplaced with T in case of thr ee phase pumps.
Pump Model TRP-S TEP-S TEP-7S TSP-S TSP-7S Motor Power kw HP.7.5.7.5.75..7.5.75. Nett Weight & Dimensions Dimensions in (mm) A B C D E F F G H H H2 N DNA DNM Approx. Nett weight in kg 66 8 2 2 7.7.5 57 58 5 8 " " 6.4 68.5 8 259 2 7.7.5 22 58 8 62 47 " " 6.6 85 99.5 6 2 8. 8. 26 98 6 7 58 " " 6.6 64 8 244 2 7.7.5 58 225 6 2 " " 8.25 87 99.5 297 6 2 8. 8. 8 98 27 5 44 " " 8.25 TRP TEP TSP Note : The company reserves the right to modify the technical specifications and the illustrations without notice. 6
G E N E R A L D A T A CONVERSION CHART Flow Rate Litre per second l/s Litre per minute l/min Cubic meter per hour m /h Cubic foot per hour ft /h Cubic foot per minute ft /m Imp.Gallon per minute Imp. gal/min US Gallon per minute Us gal./min Barrel per day 6.6 27. 2.89.2 5.85 54.49.7.6 2.89.5.22.264 9.57.278 6.667 5.47.5886.666 4.4 5.955.8.472.28.67.4.25 4.275.472 28.7.699 6 6.229 7.48 256.475.76 4.526.2728 9.626.5.2 4.75.6.785.227 8.29.7.8 4.286.2..66.29.9.24.29 Liquid Cubic meter m litre I Millilitre ml Imp. gallon Imp. Gal US gallon US Gal Cubic foot ft 6 X 22 264.2 5.47..22.2642.5-6 X. 2.2 X 2.642 X -5.5 X.455 4.546 4546.2.65.78.785 785.827.7.28 27.7 28.7 6.2288 7.485 Liquid Head and Pressure Newton per square meter 2 N/m (Pa) kilo pascal kpa bar bar kilogram force per square centimeter Kgf/cm2 pound force per square inch psl Foot for water ft H O 2 meter of water m H O 2 millimeter of mercury mm Hg Inch of mercury in Hg. -5 X -5.2 X.45 x.5 x.2 x.75 2.95 x..2.45.5.2 7.295-5 X.2 4.5.52.2 75. 29.5 98,67 98.7.98 4.22 2.52 75.6 28.96 6895 6.895.69.7 2..7 5.72.6 2984 2.984..5.4.5 22.42.882 9789 9.789.98..42.28 7.42.89....4.9.45.4.9 86.86.8.45.49..45 25.4 7
G E N E R A L D A T A CONVERSION CHART Length Millimeter mm Centimeter cm Meter m Inch in Feet ft Yard yd...94....97.28.9 9.7.288.96 25.4 2.54.254.8.278 4.8.48.48 2. 94.4 9.44.944 6 Kilometer = metres =.627 miles mile = 69.7 metres =.694 kilometres Mass Kilogram kg Pound lb Hundred weight (cwt) tonne t ton long tn short ton sh tn 2.25.97. 9.84 x..454.89 4.54 X 4.46 x 5. x 5.82 2.58.5.56 224.6 9.684.9842.2 6 224 2.6.2 97.2 2 7.857.972.8929 Temperature From TO Use formula Temperature Celsius, tc Temperature Fahrenheit, tf Temperature Celsius, tc Temperature Fahrenheit, tf Temperature Kelvin, tk Temperature Kelvin, tk Temperature Kelvin, tk Temperature Kelvin, tk Temperature Fahrenheit, tf Temperature Celsius, tc Temperature Celsius, tc Temperature Fahrenheit, tf K = tc + 27.5 K = (tf + 459.67 /.8) F =.8 tc + 2 C = (tf - 2) /.8 C = tk - 27.5 F =.8tk - 459.67 8
THE POWER BEHIND THE FORCE Naargo Industries Private Limited, one of the leading manufacturers of latest state of art, large range of pumps and motors, is managed by veterans who are in the pump industry for almost half a century. The products are employed in various applications like irrigation, domestic, civil construction, de-watering etc; The Company has a strong distribution network in India for sales & service and a strong global presence. Quality is the key factor in Naargo's products. The expansive infrastructure and environment accredited with ISO 9 quality certification, latest engineering softwares, high-tech machinery, futuristic pumping technology and high caliber workforce facilitate the production of flawless and efficient products on par with international standards under the brand name of "Tormac". The well equipped R & D wing stays alive to the changing global trends and comes out with viable solutions for innovative product development and upgradation. The Products currently available include Stainless Steel Submersible Pumps, 4" Thermoplastic Submersible Pumps, 6" & 8" Cast Iron Submersible Pumps, Submersible Motors and Controls, Centrifugal Pumps, Inline Booster Pumps, Jet Self-priming Pumps and Peripheral Pumps. The power, performance and endurance of the products backed by the uncompromising teamwork IC- IBF A/-E2 and value systems will certainly propel the company's growth towards new horizons in the pump industry. P U M P S